The R329 and D1 support multiple I2S data input pins, but to use these
they require explicit mapping to channels.
Add a mapping of DIN pins to the 16 channels in the sun4i_i2s struct
then use that to write the channel mapping register.
For now the mapping is always to DIN0, identical to the previous
behaviour.
Signed-off-by: John Watts <[email protected]>
---
sound/soc/sunxi/sun4i-i2s.c | 40 +++++++++++++++++++++++++++++++++----
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 669d712bbe9f..d8f999ecaf05 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -216,6 +216,7 @@ struct sun4i_i2s {
unsigned int mclk_freq;
unsigned int slots;
unsigned int slot_width;
+ u8 channel_dins[16];
struct snd_dmaengine_dai_dma_data capture_dma_data;
struct snd_dmaengine_dai_dma_data playback_dma_data;
@@ -233,6 +234,13 @@ struct sun4i_i2s_clk_div {
u8 val;
};
+static int sun4i_i2s_read_channel_dins(struct device *dev, struct sun4i_i2s *i2s)
+{
+ /* Use DIN pin 0 by default */
+ memset(i2s->channel_dins, 0, sizeof(i2s->channel_dins));
+ return 0;
+}
+
static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 2, .val = 0 },
{ .div = 4, .val = 1 },
@@ -527,6 +535,25 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
return 0;
}
+static void sun50i_h6_write_channel_map(const struct sun4i_i2s *i2s,
+ unsigned int reg,
+ unsigned int channel_start)
+{
+ unsigned int reg_value = 0;
+
+ /* Loop backwards so we can shift values in */
+ for (int i = 3; i >= 0; i--) {
+ int channel = channel_start + i;
+ u8 din = i2s->channel_dins[channel];
+ u8 slot = channel; /* Map slot to channel */
+
+ reg_value <<= 8;
+ reg_value |= (din << 4) | slot;
+ }
+
+ regmap_write(i2s->regmap, reg, reg_value);
+}
+
static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
unsigned int channels, unsigned int slots,
unsigned int slot_width)
@@ -537,10 +564,10 @@ static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG(0), 0xFEDCBA98);
regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG(0), 0x76543210);
if (i2s->variant->num_din_pins > 1) {
- regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP0_REG, 0x0F0E0D0C);
- regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP1_REG, 0x0B0A0908);
- regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP2_REG, 0x07060504);
- regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP3_REG, 0x03020100);
+ sun50i_h6_write_channel_map(i2s, SUN50I_R329_I2S_RX_CHAN_MAP0_REG, 12);
+ sun50i_h6_write_channel_map(i2s, SUN50I_R329_I2S_RX_CHAN_MAP1_REG, 8);
+ sun50i_h6_write_channel_map(i2s, SUN50I_R329_I2S_RX_CHAN_MAP2_REG, 4);
+ sun50i_h6_write_channel_map(i2s, SUN50I_R329_I2S_RX_CHAN_MAP3_REG, 0);
} else {
regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0xFEDCBA98);
regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
@@ -1559,6 +1586,11 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
}
}
+ if (sun4i_i2s_read_channel_dins(&pdev->dev, i2s)) {
+ dev_err(&pdev->dev, "Invalid channel DINs\n");
+ return -EINVAL;
+ }
+
i2s->playback_dma_data.addr = res->start +
i2s->variant->reg_offset_txdata;
i2s->playback_dma_data.maxburst = 8;
--
2.41.0