If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.
On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.
For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:
1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
configured using software nodes.
Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.
Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.
Signed-off-by: Richard Fitzgerald <[email protected]>
---
sound/soc/codecs/cs35l56.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c
index f2e7c6d0be46..e6e366333a47 100644
--- a/sound/soc/codecs/cs35l56.c
+++ b/sound/soc/codecs/cs35l56.c
@@ -772,9 +772,20 @@ static int cs35l56_component_probe(struct snd_soc_component *component)
{
struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(component);
struct dentry *debugfs_root = component->debugfs_root;
+ unsigned short vendor, device;
BUILD_BUG_ON(ARRAY_SIZE(cs35l56_tx_input_texts) != ARRAY_SIZE(cs35l56_tx_input_values));
+ if (!cs35l56->dsp.system_name &&
+ (snd_soc_card_get_pci_ssid(component->card, &vendor, &device) == 0)) {
+ cs35l56->dsp.system_name = devm_kasprintf(cs35l56->base.dev,
+ GFP_KERNEL,
+ "%04x%04x",
+ vendor, device);
+ if (!cs35l56->dsp.system_name)
+ return -ENOMEM;
+ }
+
if (!wait_for_completion_timeout(&cs35l56->init_completion,
msecs_to_jiffies(5000))) {
dev_err(cs35l56->base.dev, "%s: init_completion timed out\n", __func__);
--
2.30.2