2023-09-29 04:51:14

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v5 0/2] irqchip/qcom-pdc: support v3.2 HW

Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
IRQ_i_CFG register and requires a change of the driver to avoid
writing into an undefined register address.

Get the HW version from registers and set the IRQ_ENABLE bit to the
correct register depending on the HW version.

Since SM8150 DT uses a too smal PDC reg size, it's required to:
- fix SM8150 DT
- extend the PDC reg from the driver if used with old unfixed DT

Signed-off-by: Neil Armstrong <[email protected]>
---
Changes in v5:
- Rebased on v6.6-rc1
- Fixup the SoB chain as pointed out by Ingo on the PR
- Link to v4: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-0-fc633c7df84b@linaro.org

Changes in v4:
- Continue Dmitry's serie at https://lore.kernel.org/all/[email protected]/
- Dmitry's changes:
- Fix PDC resource size if it is too short instead of setting version to dummy 0 value (Marc).
- Squashed the fix into the original patch.
- Changes requested by Marc on Dmitry's serie:
- explicit PDC_VERSION is a reg offset
- remove the enum
- move the enable_intr to a shared function
- add a warning when reg size doesn't match max size
- Link to v3: https://lore.kernel.org/r/20230823-topic-sm8x50-upstream-pdc-ver-v3-1-aa7d9ab862e4@linaro.org

Changes in v3:
- Simplify qcom_pdc_gic_set_type()
- Used __assign_bit in pdc_setup_pin_mapping()
- remove BIT() from IRQ_i_CFG_IRQ_ENABLE to be used with __assign_bit()
- Add Reviewed-by tag
- Link to v2: https://lore.kernel.org/r/20230822-topic-sm8x50-upstream-pdc-ver-v2-1-3035b8d388f7@linaro.org

Changes in v2:
- Changed IRQ_ENABLE handling based on Maulik's comments
- Link to v1: https://lore.kernel.org/r/20230821-topic-sm8x50-upstream-pdc-ver-v1-1-6d7f4dd95719@linaro.org

---
Dmitry Baryshkov (1):
arm64: dts: qcom: sm8150: extend the size of the PDC resource

Neil Armstrong (1):
irqchip/qcom-pdc: Add support for v3.2 HW

arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
drivers/irqchip/qcom-pdc.c | 69 ++++++++++++++++++++++++++----------
2 files changed, 52 insertions(+), 19 deletions(-)
---
base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d
change-id: 20230821-topic-sm8x50-upstream-pdc-ver-114ceb45e1ee

Best regards,
--
Neil Armstrong <[email protected]>


2023-09-29 06:24:58

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v5 1/2] irqchip/qcom-pdc: Add support for v3.2 HW

Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
IRQ_i_CFG register and requires a change of the driver to avoid
writing into an undefined register address.

Get the HW version from registers and set the IRQ_ENABLE bit to the
correct register depending on the HW version.

Reviewed-by: Maulik Shah <[email protected]>
Acked-by: Konrad Dybcio <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/irqchip/qcom-pdc.c | 69 ++++++++++++++++++++++++++++++++++------------
1 file changed, 51 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index a32c0d28d038..74b2f124116e 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -22,9 +22,20 @@

#define PDC_MAX_GPIO_IRQS 256

+/* Valid only on HW version < 3.2 */
#define IRQ_ENABLE_BANK 0x10
#define IRQ_i_CFG 0x110

+/* Valid only on HW version >= 3.2 */
+#define IRQ_i_CFG_IRQ_ENABLE 3
+
+#define IRQ_i_CFG_TYPE_MASK GENMASK(2, 0)
+
+#define PDC_VERSION_REG 0x1000
+
+/* Notable PDC versions */
+#define PDC_VERSION_3_2 0x30200
+
struct pdc_pin_region {
u32 pin_base;
u32 parent_base;
@@ -37,6 +48,7 @@ static DEFINE_RAW_SPINLOCK(pdc_lock);
static void __iomem *pdc_base;
static struct pdc_pin_region *pdc_region;
static int pdc_region_cnt;
+static unsigned int pdc_version;

static void pdc_reg_write(int reg, u32 i, u32 val)
{
@@ -48,20 +60,32 @@ static u32 pdc_reg_read(int reg, u32 i)
return readl_relaxed(pdc_base + reg + i * sizeof(u32));
}

-static void pdc_enable_intr(struct irq_data *d, bool on)
+static void __pdc_enable_intr(int pin_out, bool on)
{
- int pin_out = d->hwirq;
unsigned long enable;
- unsigned long flags;
- u32 index, mask;

- index = pin_out / 32;
- mask = pin_out % 32;
+ if (pdc_version < PDC_VERSION_3_2) {
+ u32 index, mask;
+
+ index = pin_out / 32;
+ mask = pin_out % 32;
+
+ enable = pdc_reg_read(IRQ_ENABLE_BANK, index);
+ __assign_bit(mask, &enable, on);
+ pdc_reg_write(IRQ_ENABLE_BANK, index, enable);
+ } else {
+ enable = pdc_reg_read(IRQ_i_CFG, pin_out);
+ __assign_bit(IRQ_i_CFG_IRQ_ENABLE, &enable, on);
+ pdc_reg_write(IRQ_i_CFG, pin_out, enable);
+ }
+}
+
+static void pdc_enable_intr(struct irq_data *d, bool on)
+{
+ unsigned long flags;

raw_spin_lock_irqsave(&pdc_lock, flags);
- enable = pdc_reg_read(IRQ_ENABLE_BANK, index);
- __assign_bit(mask, &enable, on);
- pdc_reg_write(IRQ_ENABLE_BANK, index, enable);
+ __pdc_enable_intr(d->hwirq, on);
raw_spin_unlock_irqrestore(&pdc_lock, flags);
}

@@ -142,6 +166,7 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
}

old_pdc_type = pdc_reg_read(IRQ_i_CFG, d->hwirq);
+ pdc_type |= (old_pdc_type & ~IRQ_i_CFG_TYPE_MASK);
pdc_reg_write(IRQ_i_CFG, d->hwirq, pdc_type);

ret = irq_chip_set_type_parent(d, type);
@@ -246,7 +271,6 @@ static const struct irq_domain_ops qcom_pdc_ops = {
static int pdc_setup_pin_mapping(struct device_node *np)
{
int ret, n, i;
- u32 irq_index, reg_index, val;

n = of_property_count_elems_of_size(np, "qcom,pdc-ranges", sizeof(u32));
if (n <= 0 || n % 3)
@@ -276,29 +300,38 @@ static int pdc_setup_pin_mapping(struct device_node *np)
if (ret)
return ret;

- for (i = 0; i < pdc_region[n].cnt; i++) {
- reg_index = (i + pdc_region[n].pin_base) >> 5;
- irq_index = (i + pdc_region[n].pin_base) & 0x1f;
- val = pdc_reg_read(IRQ_ENABLE_BANK, reg_index);
- val &= ~BIT(irq_index);
- pdc_reg_write(IRQ_ENABLE_BANK, reg_index, val);
- }
+ for (i = 0; i < pdc_region[n].cnt; i++)
+ __pdc_enable_intr(i + pdc_region[n].pin_base, 0);
}

return 0;
}

+#define QCOM_PDC_SIZE 0x30000
+
static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
{
struct irq_domain *parent_domain, *pdc_domain;
+ resource_size_t res_size;
+ struct resource res;
int ret;

- pdc_base = of_iomap(node, 0);
+ /* compat with old sm8150 DT which had very small region for PDC */
+ if (of_address_to_resource(node, 0, &res))
+ return -EINVAL;
+
+ res_size = max_t(resource_size_t, resource_size(&res), QCOM_PDC_SIZE);
+ if (res_size > resource_size(&res))
+ pr_warn("%pOF: invalid reg size, please fix DT\n", node);
+
+ pdc_base = ioremap(res.start, res_size);
if (!pdc_base) {
pr_err("%pOF: unable to map PDC registers\n", node);
return -ENXIO;
}

+ pdc_version = pdc_reg_read(PDC_VERSION_REG, 0);
+
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%pOF: unable to find PDC's parent domain\n", node);

--
2.34.1

2023-09-29 10:03:42

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v5 2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource

From: Dmitry Baryshkov <[email protected]>

Follow the example of other platforms and extend the PDC resource region
to 0x30000, so that the PDC driver can read the PDC_VERSION register.

Fixes: 397ad94668c1 ("arm64: dts: qcom: sm8150: Add pdc interrupt controller node")
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index a7c3020a5de4..06c53000bb74 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3958,7 +3958,7 @@ dispcc: clock-controller@af00000 {

pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8150-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x400>;
+ reg = <0 0x0b220000 0 0x30000>;
qcom,pdc-ranges = <0 480 94>, <94 609 31>,
<125 63 1>;
#interrupt-cells = <2>;

--
2.34.1

2023-10-22 16:24:13

by Bjorn Andersson

[permalink] [raw]
Subject: Re: (subset) [PATCH v5 0/2] irqchip/qcom-pdc: support v3.2 HW


On Fri, 29 Sep 2023 05:43:59 +0200, Neil Armstrong wrote:
> Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
> IRQ_i_CFG register and requires a change of the driver to avoid
> writing into an undefined register address.
>
> Get the HW version from registers and set the IRQ_ENABLE bit to the
> correct register depending on the HW version.
>
> [...]

Applied, thanks!

[2/2] arm64: dts: qcom: sm8150: extend the size of the PDC resource
commit: 00c86efb0f78319958b7bca3391c532016acf39c

Best regards,
--
Bjorn Andersson <[email protected]>