From: Simon Trimmer <[email protected]>
As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.
Signed-off-by: Simon Trimmer <[email protected]>
Signed-off-by: Richard Fitzgerald <[email protected]>
---
include/sound/cs35l56.h | 1 +
sound/soc/codecs/cs35l56-shared.c | 51 +++++++++++++++++++++----------
2 files changed, 36 insertions(+), 16 deletions(-)
diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
index 762b96b29211..8c18e8b6d27d 100644
--- a/include/sound/cs35l56.h
+++ b/include/sound/cs35l56.h
@@ -243,6 +243,7 @@
#define CS35L56_HALO_STATE_POLL_US 1000
#define CS35L56_HALO_STATE_TIMEOUT_US 50000
#define CS35L56_RESET_PULSE_MIN_US 1100
+#define CS35L56_WAKE_HOLD_TIME_US 1000
#define CS35L56_SDW1_PLAYBACK_PORT 1
#define CS35L56_SDW1_CAPTURE_PORT 3
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index 68dc93b82789..953ba066bab1 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -446,6 +446,32 @@ static const struct reg_sequence cs35l56_hibernate_wake_seq[] = {
REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_WAKEUP),
};
+static void cs35l56_issue_wake_event(struct cs35l56_base *cs35l56_base)
+{
+ /*
+ * Dummy transactions to trigger I2C/SPI auto-wake. Issue two
+ * transactions to meet the minimum required time from the rising edge
+ * to the last falling edge of wake.
+ *
+ * It uses bypassed write because we must wake the chip before
+ * disabling regmap cache-only.
+ *
+ * This can NAK on I2C which will terminate the write sequence so the
+ * single-write sequence is issued twice.
+ */
+ regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
+ cs35l56_hibernate_wake_seq,
+ ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+
+ usleep_range(CS35L56_WAKE_HOLD_TIME_US, 2 * CS35L56_WAKE_HOLD_TIME_US);
+
+ regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
+ cs35l56_hibernate_wake_seq,
+ ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+
+ cs35l56_wait_control_port_ready();
+}
+
int cs35l56_runtime_suspend_common(struct cs35l56_base *cs35l56_base)
{
unsigned int val;
@@ -500,17 +526,9 @@ int cs35l56_runtime_resume_common(struct cs35l56_base *cs35l56_base, bool is_sou
if (!cs35l56_base->can_hibernate)
goto out_sync;
- if (!is_soundwire) {
- /*
- * Dummy transaction to trigger I2C/SPI auto-wake. This will NAK on I2C.
- * Must be done before releasing cache-only.
- */
- regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
- cs35l56_hibernate_wake_seq,
- ARRAY_SIZE(cs35l56_hibernate_wake_seq));
-
- cs35l56_wait_control_port_ready();
- }
+ /* Must be done before releasing cache-only */
+ if (!is_soundwire)
+ cs35l56_issue_wake_event(cs35l56_base);
out_sync:
regcache_cache_only(cs35l56_base->regmap, false);
@@ -578,13 +596,14 @@ int cs35l56_hw_init(struct cs35l56_base *cs35l56_base)
unsigned int devid, revid, otpid, secured;
/*
- * If the system is not using a reset_gpio then issue a
- * dummy read to force a wakeup.
+ * When the system is not using a reset_gpio ensure the device is
+ * awake, otherwise the device has just been released from reset and
+ * the driver must wait for the control port to become usable.
*/
if (!cs35l56_base->reset_gpio)
- regmap_read(cs35l56_base->regmap, CS35L56_DSP_VIRTUAL1_MBOX_1, &devid);
-
- cs35l56_wait_control_port_ready();
+ cs35l56_issue_wake_event(cs35l56_base);
+ else
+ cs35l56_wait_control_port_ready();
/*
* The HALO_STATE register is in different locations on Ax and B0
--
2.30.2