2023-10-12 06:42:53

by Sridharan S N

Subject: [PATCH] mtd: spinand: winbond: add support for serial NAND flash

Add support for W25N01JW, W25N02JWZEIF, W25N512GW,
W25N02KWZEIR and W25N01GWZEIG.

W25N02KWZEIR has 8b/512b on-die ECC capability and other
four has 4b/512b on-die ECC capability.

Signed-off-by: Sridharan S N <[email protected]>
Signed-off-by: Md Sadre Alam <[email protected]>
---
drivers/mtd/nand/spi/winbond.c | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index f507e3759301..1a473021cca5 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -169,6 +169,51 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants),
0,
SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N01JW",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbc, 0x21),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N02JWZEIF",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbf, 0x22),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 2, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N512GW",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x20),
+ NAND_MEMORG(1, 2048, 64, 64, 512, 10, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N02KWZEIR",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x22),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N01GWZEIG",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x21),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, w25n02kv_ecc_get_status)),
};

static int winbond_spinand_init(struct spinand_device *spinand)
--
2.34.1

2023-10-16 09:29:12

by Miquel Raynal

Subject: Re: [PATCH] mtd: spinand: winbond: add support for serial NAND flash

On Thu, 2023-10-12 at 06:41:34 UTC, Sridharan S N wrote:
> Add support for W25N01JW, W25N02JWZEIF, W25N512GW,
> W25N02KWZEIR and W25N01GWZEIG.
>
> W25N02KWZEIR has 8b/512b on-die ECC capability and other
> four has 4b/512b on-die ECC capability.
>
> Signed-off-by: Sridharan S N <[email protected]>
> Signed-off-by: Md Sadre Alam <[email protected]>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel