When cgroup_rstat_updated() isn't being called concurrently with
cgroup_rstat_flush_locked(), its run time is pretty short. When
both are called concurrently, the cgroup_rstat_updated() run time
can spike to a pretty high value due to high cpu_lock hold time in
cgroup_rstat_flush_locked(). This can be problematic if the task calling
cgroup_rstat_updated() is a realtime task running on an isolated CPU
with a strict latency requirement. The cgroup_rstat_updated() call can
happen when there is a page fault even though the task is running in
user space most of the time.
The percpu cpu_lock is used to protect the update tree -
updated_next and updated_children. This protection is only needed when
cgroup_rstat_cpu_pop_updated() is being called. The subsequent flushing
operation which can take a much longer time does not need that protection
as it is already protected by cgroup_rstat_lock.
To reduce the cpu_lock hold time, we need to perform all the
cgroup_rstat_cpu_pop_updated() calls up front with the lock
released afterward before doing any flushing. This patch adds a new
cgroup_rstat_updated_list() function to return a singly linked list of
cgroups to be flushed.
Some instrumentation code are added to measure the cpu_lock hold time
right after lock acquisition to after releasing the lock. Parallel
kernel build on a 2-socket x86-64 server is used as the benchmarking
tool for measuring the lock hold time.
The maximum cpu_lock hold time before and after the patch are 100us and
29us respectively. So the worst case time is reduced to about 30% of
the original. However, there may be some OS or hardware noises like NMI
or SMI in the test system that can worsen the worst case value. Those
noises are usually tuned out in a real production environment to get
a better result.
OTOH, the lock hold time frequency distribution should give a better
idea of the performance benefit of the patch. Below were the frequency
distribution before and after the patch:
Hold time Before patch After patch
--------- ------------ -----------
0-01 us 804,139 13,738,708
01-05 us 9,772,767 1,177,194
05-10 us 4,595,028 4,984
10-15 us 303,481 3,562
15-20 us 78,971 1,314
20-25 us 24,583 18
25-30 us 6,908 12
30-40 us 8,015
40-50 us 2,192
50-60 us 316
60-70 us 43
70-80 us 7
80-90 us 2
>90 us 3
Signed-off-by: Waiman Long <[email protected]>
Reviewed-by: Yosry Ahmed <[email protected]>
---
include/linux/cgroup-defs.h | 7 ++++++
kernel/cgroup/rstat.c | 43 ++++++++++++++++++++++++-------------
2 files changed, 35 insertions(+), 15 deletions(-)
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 265da00a1a8b..ff4b4c590f32 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -491,6 +491,13 @@ struct cgroup {
struct cgroup_rstat_cpu __percpu *rstat_cpu;
struct list_head rstat_css_list;
+ /*
+ * A singly-linked list of cgroup structures to be rstat flushed.
+ * This is a scratch field to be used exclusively by
+ * cgroup_rstat_flush_locked() and protected by cgroup_rstat_lock.
+ */
+ struct cgroup *rstat_flush_next;
+
/* cgroup basic resource statistics */
struct cgroup_base_stat last_bstat;
struct cgroup_base_stat bstat;
diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index d80d7a608141..1f300bf4dc40 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -145,6 +145,32 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
return pos;
}
+/* Return a list of updated cgroups to be flushed */
+static struct cgroup *cgroup_rstat_updated_list(struct cgroup *root, int cpu)
+{
+ raw_spinlock_t *cpu_lock = per_cpu_ptr(&cgroup_rstat_cpu_lock, cpu);
+ struct cgroup *head, *tail, *next;
+ unsigned long flags;
+
+ /*
+ * The _irqsave() is needed because cgroup_rstat_lock is
+ * spinlock_t which is a sleeping lock on PREEMPT_RT. Acquiring
+ * this lock with the _irq() suffix only disables interrupts on
+ * a non-PREEMPT_RT kernel. The raw_spinlock_t below disables
+ * interrupts on both configurations. The _irqsave() ensures
+ * that interrupts are always disabled and later restored.
+ */
+ raw_spin_lock_irqsave(cpu_lock, flags);
+ head = tail = cgroup_rstat_cpu_pop_updated(NULL, root, cpu);
+ while (tail) {
+ next = cgroup_rstat_cpu_pop_updated(tail, root, cpu);
+ tail->rstat_flush_next = next;
+ tail = next;
+ }
+ raw_spin_unlock_irqrestore(cpu_lock, flags);
+ return head;
+}
+
/*
* A hook for bpf stat collectors to attach to and flush their stats.
* Together with providing bpf kfuncs for cgroup_rstat_updated() and
@@ -179,21 +205,9 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp)
lockdep_assert_held(&cgroup_rstat_lock);
for_each_possible_cpu(cpu) {
- raw_spinlock_t *cpu_lock = per_cpu_ptr(&cgroup_rstat_cpu_lock,
- cpu);
- struct cgroup *pos = NULL;
- unsigned long flags;
+ struct cgroup *pos = cgroup_rstat_updated_list(cgrp, cpu);
- /*
- * The _irqsave() is needed because cgroup_rstat_lock is
- * spinlock_t which is a sleeping lock on PREEMPT_RT. Acquiring
- * this lock with the _irq() suffix only disables interrupts on
- * a non-PREEMPT_RT kernel. The raw_spinlock_t below disables
- * interrupts on both configurations. The _irqsave() ensures
- * that interrupts are always disabled and later restored.
- */
- raw_spin_lock_irqsave(cpu_lock, flags);
- while ((pos = cgroup_rstat_cpu_pop_updated(pos, cgrp, cpu))) {
+ for (; pos; pos = pos->rstat_flush_next) {
struct cgroup_subsys_state *css;
cgroup_base_stat_flush(pos, cpu);
@@ -205,7 +219,6 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp)
css->ss->css_rstat_flush(css, cpu);
rcu_read_unlock();
}
- raw_spin_unlock_irqrestore(cpu_lock, flags);
/* play nice and yield if necessary */
if (need_resched() || spin_needbreak(&cgroup_rstat_lock)) {
--
2.39.3