From: Hiago De Franco <[email protected]>
Add the toradex,apalis_imx6q-eval-v1.2 compatible string for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis_imx6q-eval compatible string should be
used for both v1.0 and v1.1.
Signed-off-by: Hiago De Franco <[email protected]>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..9502a2946071 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -384,7 +384,8 @@ properties:
- toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
- toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
- toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
- - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
+ - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1
+ - toradex,apalis_imx6q-eval-v1.2 # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2
- const: toradex,apalis_imx6q
- const: fsl,imx6q
--
2.43.0
On Mon, Jan 22, 2024 at 09:34:59AM -0300, Hiago De Franco wrote:
> From: Hiago De Franco <[email protected]>
>
> Add the toradex,apalis_imx6q-eval-v1.2 compatible string for version 1.2
> of the Apalis Evaluation Board.
>
> Version v1.2 includes the following changes compared to v1.1:
>
> - 8-bit MMC connector replaced with a 4-bit uSD connector.
> - Audio codec NAU88C22 added.
> - M24C02 EEPROM i2c added.
> - MIPI-CSI-2 connector directly to the board added.
> - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
> PCIe connector.
> - Power measurement IC INA219 added.
> - Replaced DVI with HDMI connector.
> - Single-channel USB to UART converter replaced with four-channel USB
> to UART/JTAG.
> - Temperature sensor TMP75 added.
>
> Please note that version v1.0 (which reached EOL) is compatible with
> v1.1, therefore toradex,apalis_imx6q-eval compatible string should be
> used for both v1.0 and v1.1.
>
> Signed-off-by: Hiago De Franco <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Cheers,
Conor.