From: Joao Paulo Goncalves <[email protected]>
Add the toradex,apalis-imx8-eval-v1.2 and
toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that board version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
compatible strings should be used for both v1.0 and v1.1.
Signed-off-by: Joao Paulo Goncalves <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..b877f940490a 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1194,7 +1194,8 @@ properties:
- description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
items:
- enum:
- - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation Board
+ - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+ - toradex,apalis-imx8-eval-v1.2 # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
- toradex,apalis-imx8-ixora-v1.1 # Apalis iMX8 Module on Ixora V1.1 Carrier Board
- const: toradex,apalis-imx8
- const: fsl,imx8qm
@@ -1202,7 +1203,8 @@ properties:
- description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
items:
- enum:
- - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+ - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+ - toradex,apalis-imx8-v1.1-eval-v1.2 # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
- toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
- toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
- const: toradex,apalis-imx8-v1.1
--
2.39.2
On Thu, Jan 25, 2024 at 11:14:56AM +0100, Francesco Dolcini wrote:
> From: Joao Paulo Goncalves <[email protected]>
>
> Add the toradex,apalis-imx8-eval-v1.2 and
> toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
> of the Apalis Evaluation Board.
>
> Version v1.2 includes the following changes compared to v1.1:
>
> - 8-bit MMC connector replaced with a 4-bit uSD connector.
> - Audio codec NAU88C22 added.
> - M24C02 EEPROM i2c added.
> - MIPI-CSI-2 connector directly to the board added.
> - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
> PCIe connector.
> - Power measurement IC INA219 added.
> - Replaced DVI with HDMI connector.
> - Single-channel USB to UART converter replaced with four-channel USB
> to UART/JTAG.
> - Temperature sensor TMP75 added.
>
> Please note that board version v1.0 (which reached EOL) is compatible with
> v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
> compatible strings should be used for both v1.0 and v1.1.
>
> Signed-off-by: Joao Paulo Goncalves <[email protected]>
> Signed-off-by: Francesco Dolcini <[email protected]>
I was convinced that I acked this already a few days ago, but no:
https://lore.kernel.org/all/[email protected]/
Acked-by: Conor Dooley <[email protected]>
Cheers,
Conor.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 228dcc5c7d6f..b877f940490a 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -1194,7 +1194,8 @@ properties:
> - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
> items:
> - enum:
> - - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation Board
> + - toradex,apalis-imx8-eval # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
> + - toradex,apalis-imx8-eval-v1.2 # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
> - toradex,apalis-imx8-ixora-v1.1 # Apalis iMX8 Module on Ixora V1.1 Carrier Board
> - const: toradex,apalis-imx8
> - const: fsl,imx8qm
> @@ -1202,7 +1203,8 @@ properties:
> - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
> items:
> - enum:
> - - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. Board
> + - toradex,apalis-imx8-v1.1-eval # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
> + - toradex,apalis-imx8-v1.1-eval-v1.2 # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
> - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
> - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
> - const: toradex,apalis-imx8-v1.1
> --
> 2.39.2
>
On Thu, Jan 25, 2024 at 05:08:04PM +0000, Conor Dooley wrote:
> On Thu, Jan 25, 2024 at 11:14:56AM +0100, Francesco Dolcini wrote:
> > From: Joao Paulo Goncalves <[email protected]>
> >
> > Add the toradex,apalis-imx8-eval-v1.2 and
> > toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
> > of the Apalis Evaluation Board.
> >
> > Version v1.2 includes the following changes compared to v1.1:
> >
> > - 8-bit MMC connector replaced with a 4-bit uSD connector.
> > - Audio codec NAU88C22 added.
> > - M24C02 EEPROM i2c added.
> > - MIPI-CSI-2 connector directly to the board added.
> > - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
> > PCIe connector.
> > - Power measurement IC INA219 added.
> > - Replaced DVI with HDMI connector.
> > - Single-channel USB to UART converter replaced with four-channel USB
> > to UART/JTAG.
> > - Temperature sensor TMP75 added.
> >
> > Please note that board version v1.0 (which reached EOL) is compatible with
> > v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
> > compatible strings should be used for both v1.0 and v1.1.
> >
> > Signed-off-by: Joao Paulo Goncalves <[email protected]>
> > Signed-off-by: Francesco Dolcini <[email protected]>
>
> I was convinced that I acked this already a few days ago, but no:
> https://lore.kernel.org/all/[email protected]/
Same, but different ;-).
This is a modular system made of a SoM + carrier board. Those two
series introduce a new revision of the same carrier board [1], combined
with two different SoMs (apalis imx8 [2] and apalis imx6 [3]).
Francesco
[1] https://www.toradex.com/products/carrier-board/apalis-evaluation-board
[2] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8
[3] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6