2024-02-13 20:14:07

by Conor Dooley

[permalink] [raw]
Subject: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low

From: Conor Dooley <[email protected]>

active-low was lifted to the common schema for leds, but it went
unnoticed that the leds-multicolour binding had "additionalProperties:
false" where the other users had "unevaluatedProperties: false", thereby
disallowing active-low for multicolour leds. Explicitly permit it again.

Fixes: c94d1783136e ("dt-bindings: net: phy: Make LED active-low property common")
Signed-off-by: Conor Dooley <[email protected]>
---

I'm just assuming this is intentionally restrictive, if its not, we
could easily just change this to uneval: false.

CC: Pavel Machek <[email protected]>
CC: Lee Jones <[email protected]>
CC: Rob Herring <[email protected]>
CC: Krzysztof Kozlowski <[email protected]>
CC: Conor Dooley <[email protected]>
CC: Sven Schwermer <[email protected]>
CC: Christian Marangi <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
---
Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index 5edfbe347341..a31a202afe5c 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -41,6 +41,8 @@ properties:

pwm-names: true

+ active-low: true
+
color: true

required:
--
2.43.0



2024-02-15 15:01:20

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low


On Tue, 13 Feb 2024 20:13:41 +0000, Conor Dooley wrote:
> From: Conor Dooley <[email protected]>
>
> active-low was lifted to the common schema for leds, but it went
> unnoticed that the leds-multicolour binding had "additionalProperties:
> false" where the other users had "unevaluatedProperties: false", thereby
> disallowing active-low for multicolour leds. Explicitly permit it again.
>
> Fixes: c94d1783136e ("dt-bindings: net: phy: Make LED active-low property common")
> Signed-off-by: Conor Dooley <[email protected]>
> ---
>
> I'm just assuming this is intentionally restrictive, if its not, we
> could easily just change this to uneval: false.
>
> CC: Pavel Machek <[email protected]>
> CC: Lee Jones <[email protected]>
> CC: Rob Herring <[email protected]>
> CC: Krzysztof Kozlowski <[email protected]>
> CC: Conor Dooley <[email protected]>
> CC: Sven Schwermer <[email protected]>
> CC: Christian Marangi <[email protected]>
> CC: [email protected]
> CC: [email protected]
> CC: [email protected]
> ---
> Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>

Acked-by: Rob Herring <[email protected]>


2024-02-23 15:43:19

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low

On Tue, 13 Feb 2024, Conor Dooley wrote:

> From: Conor Dooley <[email protected]>
>
> active-low was lifted to the common schema for leds, but it went
> unnoticed that the leds-multicolour binding had "additionalProperties:
> false" where the other users had "unevaluatedProperties: false", thereby
> disallowing active-low for multicolour leds. Explicitly permit it again.
>
> Fixes: c94d1783136e ("dt-bindings: net: phy: Make LED active-low property common")
> Signed-off-by: Conor Dooley <[email protected]>
> ---
>
> I'm just assuming this is intentionally restrictive, if its not, we
> could easily just change this to uneval: false.
>
> CC: Pavel Machek <[email protected]>
> CC: Lee Jones <[email protected]>
> CC: Rob Herring <[email protected]>
> CC: Krzysztof Kozlowski <[email protected]>
> CC: Conor Dooley <[email protected]>
> CC: Sven Schwermer <[email protected]>
> CC: Christian Marangi <[email protected]>
> CC: [email protected]
> CC: [email protected]
> CC: [email protected]
> ---
> Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> index 5edfbe347341..a31a202afe5c 100644
> --- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> @@ -41,6 +41,8 @@ properties:
>
> pwm-names: true
>
> + active-low: true
> +
> color: true
>
> required:
> --
> 2.43.0

Neither checkpatch.pl or Git appear to be happy with this:

ERROR: Does not appear to be a unified-diff format patch

total: 1 errors, 0 warnings, 0 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

"[PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low" has style problems, please review.

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
WARNING: Missing commit description - Add an appropriate one

ERROR: Missing Signed-off-by: line(s)

total: 1 errors, 1 warnings, 8 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

Your patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Check the results (hit return to continue or Ctrl+c to exit)


Applying patch(es)
Applying: dt-bindings: leds: pwm-multicolour: re-allow active-low
Using index info to reconstruct a base tree...
M Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
/home/joneslee/projects/linux/kernel/.git/worktrees/for-led-next/rebase-apply/patch:28: indent with spaces.
active-low: true
Checking patch Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml...
Applied patch Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml cleanly.
warning: 1 line adds whitespace errors.
Falling back to patching base and 3-way merge...
error: Your local changes to the following files would be overwritten by merge:
Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
Please commit your changes or stash them before you merge.
Aborting
error: Failed to merge in the changes.
Patch failed at 0001 dt-bindings: leds: pwm-multicolour: re-allow active-low
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

--
Lee Jones [李琼斯]

2024-02-23 18:25:36

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low

On Fri, Feb 23, 2024 at 03:43:04PM +0000, Lee Jones wrote:
> On Tue, 13 Feb 2024, Conor Dooley wrote:
>
> > From: Conor Dooley <[email protected]>
> >
> > active-low was lifted to the common schema for leds, but it went
> > unnoticed that the leds-multicolour binding had "additionalProperties:
> > false" where the other users had "unevaluatedProperties: false", thereby
> > disallowing active-low for multicolour leds. Explicitly permit it again.
> >
> > Fixes: c94d1783136e ("dt-bindings: net: phy: Make LED active-low property common")
> > Signed-off-by: Conor Dooley <[email protected]>
> > ---
> >
> > I'm just assuming this is intentionally restrictive, if its not, we
> > could easily just change this to uneval: false.
> >
> > CC: Pavel Machek <[email protected]>
> > CC: Lee Jones <[email protected]>
> > CC: Rob Herring <[email protected]>
> > CC: Krzysztof Kozlowski <[email protected]>
> > CC: Conor Dooley <[email protected]>
> > CC: Sven Schwermer <[email protected]>
> > CC: Christian Marangi <[email protected]>
> > CC: [email protected]
> > CC: [email protected]
> > CC: [email protected]
> > ---
> > Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> > index 5edfbe347341..a31a202afe5c 100644
> > --- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> > +++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
> > @@ -41,6 +41,8 @@ properties:
> >
> > pwm-names: true
> >
> > + active-low: true
> > +
> > color: true
> >
> > required:
> > --
> > 2.43.0
>
> Neither checkpatch.pl or Git appear to be happy with this:

18:15:26 conor /stuff/linux$ shazam 20240213-verse-clinic-e6de06e1f18d@spud
Grabbing thread from lore.kernel.org/all/20240213-verse-clinic-e6de06e1f18d@spud/t.mbox.gz
Checking for newer revisions
Grabbing search results from lore.kernel.org
Analyzing 3 messages in the thread
Looking for additional code-review trailers on lore.kernel.org
Checking attestation on all messages, may take a moment...
Retrieving CI status, may take a moment...
---
✓ [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low
+ Acked-by: Rob Herring <[email protected]> (✓ DKIM/kernel.org)
---
✓ Signed: openpgp/[email protected] (From: [email protected])
✓ Signed: DKIM/kernel.org
---
Total patches: 1
---
Applying: dt-bindings: leds: pwm-multicolour: re-allow active-low
18:15:39 conor /stuff/linux$ git show HEAD~1
commit 2d5c7b7eb345249cb34d42cbc2b97b4c57ea944e (tag: next-20240220, korg-next/master)

What do you use to apply patches? b4 seems to have no trouble.

Cheers,
Conor.


Attachments:
(No filename) (2.92 kB)
signature.asc (235.00 B)
Download all attachments