Add IW8103 Wifi + bluetooth module to device tree and related power domain.
Signed-off-by: Alexandre GRIVEAUX <[email protected]>
---
arch/mips/boot/dts/ingenic/ci20.dts | 39 +++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 4a77fa30a9cd..c62c36ae94c2 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -31,6 +31,13 @@
gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
enable-active-high;
};
+
+ wlan0_power: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan0_power";
+ gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
};
&ext {
@@ -54,9 +61,18 @@
bus-width = <4>;
max-frequency = <50000000>;
+ non-removable;
pinctrl-names = "default";
pinctrl-0 = <&pins_mmc1>;
+
+ brcmf: wifi@1 {
+/* reg = <4>;*/
+ compatible = "brcm,bcm4330-fmac";
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+ };
};
&uart0 {
@@ -73,6 +89,23 @@
pinctrl-0 = <&pins_uart1>;
};
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
&uart3 {
status = "okay";
@@ -314,6 +347,12 @@
bias-disable;
};
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data", "uart2-hwflow";
+ bias-disable;
+ };
+
pins_uart3: uart3 {
function = "uart3";
groups = "uart3-data", "uart3-hwflow";
--
2.20.1