From: Jayant Shekhar <[email protected]>
The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.
The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.
MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.
Changes in v2:
- Remove error log and unnecessary check (Jordan Crouse)
Changes in v3:
- Code clean involving variable name change, removal
of extra paranthesis and variables (Matthias Kaehlcke)
Changes in v4:
- Add comments, spacings, tabs, proper port name
and icc macro (Georgi Djakov)
Changes in v5:
- Commit text and parenthesis alignment (Georgi Djakov)
Changes in v6:
- Change to new icc_set API's (Doug Anderson)
Changes in v7:
- Fixed a typo
Signed-off-by: Sravanthi Kollukuduru <[email protected]>
Signed-off-by: Jayant Shekhar <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 ++++++++++++++++++++++--
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
index 7316b4ab1b85..e3c56ccd7357 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -4,11 +4,15 @@
*/
#include "dpu_kms.h"
+#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
#define HW_INTR_STATUS 0x0010
+/* Max BW defined in KBps */
+#define MAX_BW 6800000
+
struct dpu_irq_controller {
unsigned long enabled_mask;
struct irq_domain *domain;
@@ -21,8 +25,30 @@ struct dpu_mdss {
u32 hwversion;
struct dss_module_power mp;
struct dpu_irq_controller irq_controller;
+ struct icc_path *path[2];
+ u32 num_paths;
};
+static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
+ struct dpu_mdss *dpu_mdss)
+{
+ struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ dpu_mdss->path[0] = path0;
+ dpu_mdss->num_paths = 1;
+
+ if (!IS_ERR(path1)) {
+ dpu_mdss->path[1] = path1;
+ dpu_mdss->num_paths++;
+ }
+
+ return 0;
+}
+
static void dpu_mdss_irq(struct irq_desc *desc)
{
struct dpu_mdss *dpu_mdss = irq_desc_get_handler_data(desc);
@@ -134,7 +160,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = &dpu_mdss->mp;
- int ret;
+ int ret, i;
+ u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
+
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (ret)
@@ -147,12 +177,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
{
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = &dpu_mdss->mp;
- int ret;
+ int ret, i;
ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
if (ret)
DPU_ERROR("clock disable failed, ret:%d\n", ret);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_set_bw(dpu_mdss->path[i], 0, 0);
+
return ret;
}
@@ -163,6 +196,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
struct dss_module_power *mp = &dpu_mdss->mp;
int irq;
+ int i;
pm_runtime_suspend(dev->dev);
pm_runtime_disable(dev->dev);
@@ -172,6 +206,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
msm_dss_put_clk(mp->clk_config, mp->num_clk);
devm_kfree(&pdev->dev, mp->clk_config);
+ for (i = 0; i < dpu_mdss->num_paths; i++)
+ icc_put(dpu_mdss->path[i]);
+
if (dpu_mdss->mmio)
devm_iounmap(&pdev->dev, dpu_mdss->mmio);
dpu_mdss->mmio = NULL;
@@ -211,6 +248,10 @@ int dpu_mdss_init(struct drm_device *dev)
}
dpu_mdss->mmio_len = resource_size(res);
+ ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
+ if (ret)
+ return ret;
+
mp = &dpu_mdss->mp;
ret = msm_dss_parse_clock(pdev, mp);
if (ret) {
@@ -232,14 +273,14 @@ int dpu_mdss_init(struct drm_device *dev)
irq_set_chained_handler_and_data(irq, dpu_mdss_irq,
dpu_mdss);
+ priv->mdss = &dpu_mdss->base;
+
pm_runtime_enable(dev->dev);
pm_runtime_get_sync(dev->dev);
dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
pm_runtime_put_sync(dev->dev);
- priv->mdss = &dpu_mdss->base;
-
return ret;
irq_error:
--
2.20.1
On Wed, May 08, 2019 at 01:42:12PM -0700, Rob Clark wrote:
> From: Jayant Shekhar <[email protected]>
>
> The interconnect framework is designed to provide a
> standard kernel interface to control the settings of
> the interconnects on a SoC.
>
> The interconnect API uses a consumer/provider-based model,
> where the providers are the interconnect buses and the
> consumers could be various drivers.
>
> MDSS is one of the interconnect consumers which uses the
> interconnect APIs to get the path between endpoints and
> set its bandwidth requirement for the given interconnected
> path.
>
> Changes in v2:
> - Remove error log and unnecessary check (Jordan Crouse)
>
> Changes in v3:
> - Code clean involving variable name change, removal
> of extra paranthesis and variables (Matthias Kaehlcke)
>
> Changes in v4:
> - Add comments, spacings, tabs, proper port name
> and icc macro (Georgi Djakov)
>
> Changes in v5:
> - Commit text and parenthesis alignment (Georgi Djakov)
>
> Changes in v6:
> - Change to new icc_set API's (Doug Anderson)
>
> Changes in v7:
> - Fixed a typo
>
> Signed-off-by: Sravanthi Kollukuduru <[email protected]>
> Signed-off-by: Jayant Shekhar <[email protected]>
> Signed-off-by: Rob Clark <[email protected]>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 ++++++++++++++++++++++--
> 1 file changed, 45 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index 7316b4ab1b85..e3c56ccd7357 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -4,11 +4,15 @@
> */
>
> #include "dpu_kms.h"
> +#include <linux/interconnect.h>
>
> #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
>
> #define HW_INTR_STATUS 0x0010
>
> +/* Max BW defined in KBps */
> +#define MAX_BW 6800000
> +
> struct dpu_irq_controller {
> unsigned long enabled_mask;
> struct irq_domain *domain;
> @@ -21,8 +25,30 @@ struct dpu_mdss {
> u32 hwversion;
> struct dss_module_power mp;
> struct dpu_irq_controller irq_controller;
> + struct icc_path *path[2];
> + u32 num_paths;
> };
>
> +static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
> + struct dpu_mdss *dpu_mdss)
> +{
> + struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
> + struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
> +
> + if (IS_ERR(path0))
of_icc_get can also return NULL, it looks like we also want to guard against
this case and keep num_paths == 0.
> + return PTR_ERR(path0);
> +
> + dpu_mdss->path[0] = path0;
> + dpu_mdss->num_paths = 1;
> +
> + if (!IS_ERR(path1)) {
> + dpu_mdss->path[1] = path1;
> + dpu_mdss->num_paths++;
> + }
> +
> + return 0;
> +}
> +
> static void dpu_mdss_irq(struct irq_desc *desc)
> {
> struct dpu_mdss *dpu_mdss = irq_desc_get_handler_data(desc);
> @@ -134,7 +160,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
> + u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
> +
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
> if (ret)
> @@ -147,12 +177,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
> if (ret)
> DPU_ERROR("clock disable failed, ret:%d\n", ret);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set_bw(dpu_mdss->path[i], 0, 0);
> +
> return ret;
> }
>
> @@ -163,6 +196,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> int irq;
> + int i;
>
> pm_runtime_suspend(dev->dev);
> pm_runtime_disable(dev->dev);
> @@ -172,6 +206,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> msm_dss_put_clk(mp->clk_config, mp->num_clk);
> devm_kfree(&pdev->dev, mp->clk_config);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_put(dpu_mdss->path[i]);
> +
> if (dpu_mdss->mmio)
> devm_iounmap(&pdev->dev, dpu_mdss->mmio);
> dpu_mdss->mmio = NULL;
> @@ -211,6 +248,10 @@ int dpu_mdss_init(struct drm_device *dev)
> }
> dpu_mdss->mmio_len = resource_size(res);
>
> + ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
> + if (ret)
> + return ret;
> +
> mp = &dpu_mdss->mp;
> ret = msm_dss_parse_clock(pdev, mp);
> if (ret) {
> @@ -232,14 +273,14 @@ int dpu_mdss_init(struct drm_device *dev)
> irq_set_chained_handler_and_data(irq, dpu_mdss_irq,
> dpu_mdss);
>
> + priv->mdss = &dpu_mdss->base;
> +
> pm_runtime_enable(dev->dev);
>
> pm_runtime_get_sync(dev->dev);
> dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
> pm_runtime_put_sync(dev->dev);
>
> - priv->mdss = &dpu_mdss->base;
> -
> return ret;
>
> irq_error:
> --
> 2.20.1
>
--
Sean Paul, Software Engineer, Google / Chromium OS
On 5/13/19 17:47, Sean Paul wrote:
> On Wed, May 08, 2019 at 01:42:12PM -0700, Rob Clark wrote:
>> From: Jayant Shekhar <[email protected]>
>>
>> The interconnect framework is designed to provide a
>> standard kernel interface to control the settings of
>> the interconnects on a SoC.
>>
>> The interconnect API uses a consumer/provider-based model,
>> where the providers are the interconnect buses and the
>> consumers could be various drivers.
>>
>> MDSS is one of the interconnect consumers which uses the
>> interconnect APIs to get the path between endpoints and
>> set its bandwidth requirement for the given interconnected
>> path.
>>
>> Changes in v2:
>> - Remove error log and unnecessary check (Jordan Crouse)
>>
>> Changes in v3:
>> - Code clean involving variable name change, removal
>> of extra paranthesis and variables (Matthias Kaehlcke)
>>
>> Changes in v4:
>> - Add comments, spacings, tabs, proper port name
>> and icc macro (Georgi Djakov)
>>
>> Changes in v5:
>> - Commit text and parenthesis alignment (Georgi Djakov)
>>
>> Changes in v6:
>> - Change to new icc_set API's (Doug Anderson)
>>
>> Changes in v7:
>> - Fixed a typo
>>
>> Signed-off-by: Sravanthi Kollukuduru <[email protected]>
>> Signed-off-by: Jayant Shekhar <[email protected]>
>> Signed-off-by: Rob Clark <[email protected]>
>> ---
>> drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 ++++++++++++++++++++++--
>> 1 file changed, 45 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
>> index 7316b4ab1b85..e3c56ccd7357 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
>> @@ -4,11 +4,15 @@
>> */
>>
>> #include "dpu_kms.h"
>> +#include <linux/interconnect.h>
>>
>> #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
>>
>> #define HW_INTR_STATUS 0x0010
>>
>> +/* Max BW defined in KBps */
>> +#define MAX_BW 6800000
>> +
>> struct dpu_irq_controller {
>> unsigned long enabled_mask;
>> struct irq_domain *domain;
>> @@ -21,8 +25,30 @@ struct dpu_mdss {
>> u32 hwversion;
>> struct dss_module_power mp;
>> struct dpu_irq_controller irq_controller;
>> + struct icc_path *path[2];
>> + u32 num_paths;
>> };
>>
>> +static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
>> + struct dpu_mdss *dpu_mdss)
>> +{
>> + struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
>> + struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
>> +
>> + if (IS_ERR(path0))
>
> of_icc_get can also return NULL, it looks like we also want to guard against
> this case and keep num_paths == 0.
of_icc_get() returns NULL when the interconnect API is not enabled or the DT
properties are not present. In this case, passing a NULL path to the icc
functions is just a nop. So it should be fine either way.
Acked-by: Georgi Djakov <[email protected]>
Thanks,
Georgi