We ran into a funky issue, where someone doing 256K buffered reads saw
128K requests at the device level. Turns out it is read-ahead capping
the request size, since we use 128K as the default setting. This doesn't
make a lot of sense - if someone is issuing 256K reads, they should see
256K reads, regardless of the read-ahead setting, if the underlying
device can support a 256K read in a single command.
This patch introduces a bdi hint, io_pages. This is the soft max IO size
for the lower level, I've hooked it up to the bdev settings here.
Read-ahead is modified to issue the maximum of the user request size,
and the read-ahead max size, but capped to the max request size on the
device side. The latter is done to avoid reading ahead too much, if the
application asks for a huge read. With this patch, the kernel behaves
like the application expects.
Signed-off-by: Jens Axboe <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
---
block/blk-settings.c | 1 +
block/blk-sysfs.c | 1 +
include/linux/backing-dev-defs.h | 1 +
mm/readahead.c | 39 ++++++++++++++++++++++++++++-----------
4 files changed, 31 insertions(+), 11 deletions(-)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index f679ae122843..65f16cf4f850 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -249,6 +249,7 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto
max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS);
limits->max_sectors = max_sectors;
+ q->backing_dev_info.io_pages = max_sectors >> (PAGE_SHIFT - 9);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9cc8d7c5439a..ea374e820775 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,6 +212,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
spin_lock_irq(q->queue_lock);
q->limits.max_sectors = max_sectors_kb << 1;
+ q->backing_dev_info.io_pages = max_sectors_kb >> (PAGE_SHIFT - 10);
spin_unlock_irq(q->queue_lock);
return ret;
diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h
index c357f27d5483..b8144b2d59ce 100644
--- a/include/linux/backing-dev-defs.h
+++ b/include/linux/backing-dev-defs.h
@@ -136,6 +136,7 @@ struct bdi_writeback {
struct backing_dev_info {
struct list_head bdi_list;
unsigned long ra_pages; /* max readahead in PAGE_SIZE units */
+ unsigned long io_pages; /* max allowed IO size */
unsigned int capabilities; /* Device capabilities */
congested_fn *congested_fn; /* Function pointer if device is md/dm */
void *congested_data; /* Pointer to aux data for congested func */
diff --git a/mm/readahead.c b/mm/readahead.c
index c8a955b1297e..fb4c99f85618 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -207,12 +207,21 @@ int __do_page_cache_readahead(struct address_space *mapping, struct file *filp,
* memory at once.
*/
int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
- pgoff_t offset, unsigned long nr_to_read)
+ pgoff_t offset, unsigned long nr_to_read)
{
+ struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct file_ra_state *ra = &filp->f_ra;
+ unsigned long max_pages;
+
if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
return -EINVAL;
- nr_to_read = min(nr_to_read, inode_to_bdi(mapping->host)->ra_pages);
+ /*
+ * If the request exceeds the readahead window, allow the read to
+ * be up to the optimal hardware IO size
+ */
+ max_pages = max_t(unsigned long, bdi->io_pages, ra->ra_pages);
+ nr_to_read = min(nr_to_read, max_pages);
while (nr_to_read) {
int err;
@@ -369,10 +378,18 @@ ondemand_readahead(struct address_space *mapping,
bool hit_readahead_marker, pgoff_t offset,
unsigned long req_size)
{
- unsigned long max = ra->ra_pages;
+ struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ unsigned long max_pages = ra->ra_pages;
pgoff_t prev_offset;
/*
+ * If the request exceeds the readahead window, allow the read to
+ * be up to the optimal hardware IO size
+ */
+ if (req_size > max_pages && bdi->io_pages > max_pages)
+ max_pages = min(req_size, bdi->io_pages);
+
+ /*
* start of file
*/
if (!offset)
@@ -385,7 +402,7 @@ ondemand_readahead(struct address_space *mapping,
if ((offset == (ra->start + ra->size - ra->async_size) ||
offset == (ra->start + ra->size))) {
ra->start += ra->size;
- ra->size = get_next_ra_size(ra, max);
+ ra->size = get_next_ra_size(ra, max_pages);
ra->async_size = ra->size;
goto readit;
}
@@ -400,16 +417,16 @@ ondemand_readahead(struct address_space *mapping,
pgoff_t start;
rcu_read_lock();
- start = page_cache_next_hole(mapping, offset + 1, max);
+ start = page_cache_next_hole(mapping, offset + 1, max_pages);
rcu_read_unlock();
- if (!start || start - offset > max)
+ if (!start || start - offset > max_pages)
return 0;
ra->start = start;
ra->size = start - offset; /* old async_size */
ra->size += req_size;
- ra->size = get_next_ra_size(ra, max);
+ ra->size = get_next_ra_size(ra, max_pages);
ra->async_size = ra->size;
goto readit;
}
@@ -417,7 +434,7 @@ ondemand_readahead(struct address_space *mapping,
/*
* oversize read
*/
- if (req_size > max)
+ if (req_size > max_pages)
goto initial_readahead;
/*
@@ -433,7 +450,7 @@ ondemand_readahead(struct address_space *mapping,
* Query the page cache and look for the traces(cached history pages)
* that a sequential stream would leave behind.
*/
- if (try_context_readahead(mapping, ra, offset, req_size, max))
+ if (try_context_readahead(mapping, ra, offset, req_size, max_pages))
goto readit;
/*
@@ -444,7 +461,7 @@ ondemand_readahead(struct address_space *mapping,
initial_readahead:
ra->start = offset;
- ra->size = get_init_ra_size(req_size, max);
+ ra->size = get_init_ra_size(req_size, max_pages);
ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
readit:
@@ -454,7 +471,7 @@ ondemand_readahead(struct address_space *mapping,
* the resulted next readahead window into the current one.
*/
if (offset == ra->start && ra->size == ra->async_size) {
- ra->async_size = get_next_ra_size(ra, max);
+ ra->async_size = get_next_ra_size(ra, max_pages);
ra->size += ra->async_size;
}
--
2.7.4
On Saturday, November 19, 2016 3:41 AM Jens Axboe wrote:
> We ran into a funky issue, where someone doing 256K buffered reads saw
> 128K requests at the device level. Turns out it is read-ahead capping
> the request size, since we use 128K as the default setting. This doesn't
> make a lot of sense - if someone is issuing 256K reads, they should see
> 256K reads, regardless of the read-ahead setting, if the underlying
> device can support a 256K read in a single command.
>
Is it also making any sense to see 4M reads to meet 4M requests if
the underlying device can support 4M IO?
thanks
Hillf
> This patch introduces a bdi hint, io_pages. This is the soft max IO size
> for the lower level, I've hooked it up to the bdev settings here.
> Read-ahead is modified to issue the maximum of the user request size,
> and the read-ahead max size, but capped to the max request size on the
> device side. The latter is done to avoid reading ahead too much, if the
> application asks for a huge read. With this patch, the kernel behaves
> like the application expects.
>
> Signed-off-by: Jens Axboe <[email protected]>
> Acked-by: Johannes Weiner <[email protected]>
> ---
> block/blk-settings.c | 1 +
> block/blk-sysfs.c | 1 +
> include/linux/backing-dev-defs.h | 1 +
> mm/readahead.c | 39 ++++++++++++++++++++++++++++-----------
> 4 files changed, 31 insertions(+), 11 deletions(-)
>
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index f679ae122843..65f16cf4f850 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -249,6 +249,7 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto
> max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
> max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS);
> limits->max_sectors = max_sectors;
> + q->backing_dev_info.io_pages = max_sectors >> (PAGE_SHIFT - 9);
> }
> EXPORT_SYMBOL(blk_queue_max_hw_sectors);
>
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9cc8d7c5439a..ea374e820775 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -212,6 +212,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
>
> spin_lock_irq(q->queue_lock);
> q->limits.max_sectors = max_sectors_kb << 1;
> + q->backing_dev_info.io_pages = max_sectors_kb >> (PAGE_SHIFT - 10);
> spin_unlock_irq(q->queue_lock);
>
> return ret;
> diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h
> index c357f27d5483..b8144b2d59ce 100644
> --- a/include/linux/backing-dev-defs.h
> +++ b/include/linux/backing-dev-defs.h
> @@ -136,6 +136,7 @@ struct bdi_writeback {
> struct backing_dev_info {
> struct list_head bdi_list;
> unsigned long ra_pages; /* max readahead in PAGE_SIZE units */
> + unsigned long io_pages; /* max allowed IO size */
> unsigned int capabilities; /* Device capabilities */
> congested_fn *congested_fn; /* Function pointer if device is md/dm */
> void *congested_data; /* Pointer to aux data for congested func */
> diff --git a/mm/readahead.c b/mm/readahead.c
> index c8a955b1297e..fb4c99f85618 100644
> --- a/mm/readahead.c
> +++ b/mm/readahead.c
> @@ -207,12 +207,21 @@ int __do_page_cache_readahead(struct address_space *mapping, struct file *filp,
> * memory at once.
> */
> int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
> - pgoff_t offset, unsigned long nr_to_read)
> + pgoff_t offset, unsigned long nr_to_read)
> {
> + struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
> + struct file_ra_state *ra = &filp->f_ra;
> + unsigned long max_pages;
> +
> if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
> return -EINVAL;
>
> - nr_to_read = min(nr_to_read, inode_to_bdi(mapping->host)->ra_pages);
> + /*
> + * If the request exceeds the readahead window, allow the read to
> + * be up to the optimal hardware IO size
> + */
> + max_pages = max_t(unsigned long, bdi->io_pages, ra->ra_pages);
> + nr_to_read = min(nr_to_read, max_pages);
> while (nr_to_read) {
> int err;
>
> @@ -369,10 +378,18 @@ ondemand_readahead(struct address_space *mapping,
> bool hit_readahead_marker, pgoff_t offset,
> unsigned long req_size)
> {
> - unsigned long max = ra->ra_pages;
> + struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
> + unsigned long max_pages = ra->ra_pages;
> pgoff_t prev_offset;
>
> /*
> + * If the request exceeds the readahead window, allow the read to
> + * be up to the optimal hardware IO size
> + */
> + if (req_size > max_pages && bdi->io_pages > max_pages)
> + max_pages = min(req_size, bdi->io_pages);
> +
> + /*
> * start of file
> */
> if (!offset)
> @@ -385,7 +402,7 @@ ondemand_readahead(struct address_space *mapping,
> if ((offset == (ra->start + ra->size - ra->async_size) ||
> offset == (ra->start + ra->size))) {
> ra->start += ra->size;
> - ra->size = get_next_ra_size(ra, max);
> + ra->size = get_next_ra_size(ra, max_pages);
> ra->async_size = ra->size;
> goto readit;
> }
> @@ -400,16 +417,16 @@ ondemand_readahead(struct address_space *mapping,
> pgoff_t start;
>
> rcu_read_lock();
> - start = page_cache_next_hole(mapping, offset + 1, max);
> + start = page_cache_next_hole(mapping, offset + 1, max_pages);
> rcu_read_unlock();
>
> - if (!start || start - offset > max)
> + if (!start || start - offset > max_pages)
> return 0;
>
> ra->start = start;
> ra->size = start - offset; /* old async_size */
> ra->size += req_size;
> - ra->size = get_next_ra_size(ra, max);
> + ra->size = get_next_ra_size(ra, max_pages);
> ra->async_size = ra->size;
> goto readit;
> }
> @@ -417,7 +434,7 @@ ondemand_readahead(struct address_space *mapping,
> /*
> * oversize read
> */
> - if (req_size > max)
> + if (req_size > max_pages)
> goto initial_readahead;
>
> /*
> @@ -433,7 +450,7 @@ ondemand_readahead(struct address_space *mapping,
> * Query the page cache and look for the traces(cached history pages)
> * that a sequential stream would leave behind.
> */
> - if (try_context_readahead(mapping, ra, offset, req_size, max))
> + if (try_context_readahead(mapping, ra, offset, req_size, max_pages))
> goto readit;
>
> /*
> @@ -444,7 +461,7 @@ ondemand_readahead(struct address_space *mapping,
>
> initial_readahead:
> ra->start = offset;
> - ra->size = get_init_ra_size(req_size, max);
> + ra->size = get_init_ra_size(req_size, max_pages);
> ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
>
> readit:
> @@ -454,7 +471,7 @@ ondemand_readahead(struct address_space *mapping,
> * the resulted next readahead window into the current one.
> */
> if (offset == ra->start && ra->size == ra->async_size) {
> - ra->async_size = get_next_ra_size(ra, max);
> + ra->async_size = get_next_ra_size(ra, max_pages);
> ra->size += ra->async_size;
> }
>
> --
> 2.7.4
On 11/20/2016 09:44 PM, Hillf Danton wrote:
> On Saturday, November 19, 2016 3:41 AM Jens Axboe wrote:
>> We ran into a funky issue, where someone doing 256K buffered reads saw
>> 128K requests at the device level. Turns out it is read-ahead capping
>> the request size, since we use 128K as the default setting. This doesn't
>> make a lot of sense - if someone is issuing 256K reads, they should see
>> 256K reads, regardless of the read-ahead setting, if the underlying
>> device can support a 256K read in a single command.
>>
> Is it also making any sense to see 4M reads to meet 4M requests if
> the underlying device can support 4M IO?
Depends on the device, but yes. Big raid set? You definitely want larger
requests. Which is why we have the distinction between max hardware and
kernel IO size.
By default we limit the soft IO size to 1280k for a block device. See
also:
commit d2be537c3ba3568acd79cd178327b842e60d035e
Author: Jeff Moyer <[email protected]>
Date: Thu Aug 13 14:57:57 2015 -0400
block: bump BLK_DEF_MAX_SECTORS to 2560
--
Jens Axboe