Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.
This workaround for this issue is mostly fine, on most Cherry Trail
devices where we need the INT0002 device for wakeups by e.g. USB kbds,
the parent IRQ is shared with the ACPI SCI and that is marked as wakeup
anyways.
But not on all devices, specifically on a Medion Akoya E1239T there is
no SCI at all, and because the irq_set_wake request is not passed on to
the parent IRQ, wake up by the builtin USB kbd does not work here.
So the workaround for the Asus E202SA immediate wake problem is causing
problems elsewhere; and in hindsight it is not the correct fix,
the Asus E202SA uses Airmont CPU cores, but this does not mean it is a
Cherry Trail based device, Brasswell uses Airmont CPU cores too and this
actually is a Braswell device.
Most (all?) Braswell devices use classic S3 mode suspend rather then
s2idle suspend and in this case directly dealing with PME events as
the INT0002 driver does likely is not the best idea, so that this is
causing issues is not surprising.
Replace the workaround of not passing irq_set_wake requests on to the
parents IRQ, by not binding to the INT0002 device when s2idle is not used.
This fixes USB kbd wakeups not working on some Cherry Trail devices,
while still avoiding mucking with the wakeup flags on the Asus E202SA
(and other Brasswell devices).
Cc: Maxim Mikityanskiy <[email protected]>
Cc: 5.3+ <[email protected]> # 5.3+
Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
Signed-off-by: Hans de Goede <[email protected]>
---
drivers/platform/x86/intel_int0002_vgpio.c | 18 +++++-------------
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
index 55f088f535e2..e8bec72d3823 100644
--- a/drivers/platform/x86/intel_int0002_vgpio.c
+++ b/drivers/platform/x86/intel_int0002_vgpio.c
@@ -143,21 +143,9 @@ static struct irq_chip int0002_byt_irqchip = {
.irq_set_wake = int0002_irq_set_wake,
};
-static struct irq_chip int0002_cht_irqchip = {
- .name = DRV_NAME,
- .irq_ack = int0002_irq_ack,
- .irq_mask = int0002_irq_mask,
- .irq_unmask = int0002_irq_unmask,
- /*
- * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
- * and we don't want to mess with the ACPI SCI irq settings.
- */
- .flags = IRQCHIP_SKIP_SET_WAKE,
-};
-
static const struct x86_cpu_id int0002_cpu_ids[] = {
INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
- INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
+ INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_byt_irqchip), /* Braswell, Cherry Trail */
{}
};
@@ -181,6 +169,10 @@ static int int0002_probe(struct platform_device *pdev)
if (!cpu_id)
return -ENODEV;
+ /* We only need to directly deal with PMEs when using s2idle */
+ if (!pm_suspend_default_s2idle())
+ return -ENODEV;
+
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
--
2.26.0
Hi all,
I just realized that I should have added a cover letter to this
patch to discuss how to merge it.
Rafael has already queued up the
"[PATCH v3 2/2] platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()"
in his tree. Looking at both patches the parts of the file the
touch are different enough that that should not be a problem though.
So I guess this can go through platform/x86 as usual, or
(assuming everyone is ok with the change itself) alternatively
Rafael can take it to make sure there will be no conflicts?
Regards,
Hans
On 07-04-2020 23:30, Hans de Goede wrote:
> Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
> irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
> the parents IRQ because this was breaking suspend (causing immediate
> wakeups) on an Asus E202SA.
>
> This workaround for this issue is mostly fine, on most Cherry Trail
> devices where we need the INT0002 device for wakeups by e.g. USB kbds,
> the parent IRQ is shared with the ACPI SCI and that is marked as wakeup
> anyways.
>
> But not on all devices, specifically on a Medion Akoya E1239T there is
> no SCI at all, and because the irq_set_wake request is not passed on to
> the parent IRQ, wake up by the builtin USB kbd does not work here.
>
> So the workaround for the Asus E202SA immediate wake problem is causing
> problems elsewhere; and in hindsight it is not the correct fix,
> the Asus E202SA uses Airmont CPU cores, but this does not mean it is a
> Cherry Trail based device, Brasswell uses Airmont CPU cores too and this
> actually is a Braswell device.
>
> Most (all?) Braswell devices use classic S3 mode suspend rather then
> s2idle suspend and in this case directly dealing with PME events as
> the INT0002 driver does likely is not the best idea, so that this is
> causing issues is not surprising.
>
> Replace the workaround of not passing irq_set_wake requests on to the
> parents IRQ, by not binding to the INT0002 device when s2idle is not used.
> This fixes USB kbd wakeups not working on some Cherry Trail devices,
> while still avoiding mucking with the wakeup flags on the Asus E202SA
> (and other Brasswell devices).
>
> Cc: Maxim Mikityanskiy <[email protected]>
> Cc: 5.3+ <[email protected]> # 5.3+
> Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
> Signed-off-by: Hans de Goede <[email protected]>
> ---
> drivers/platform/x86/intel_int0002_vgpio.c | 18 +++++-------------
> 1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
> index 55f088f535e2..e8bec72d3823 100644
> --- a/drivers/platform/x86/intel_int0002_vgpio.c
> +++ b/drivers/platform/x86/intel_int0002_vgpio.c
> @@ -143,21 +143,9 @@ static struct irq_chip int0002_byt_irqchip = {
> .irq_set_wake = int0002_irq_set_wake,
> };
>
> -static struct irq_chip int0002_cht_irqchip = {
> - .name = DRV_NAME,
> - .irq_ack = int0002_irq_ack,
> - .irq_mask = int0002_irq_mask,
> - .irq_unmask = int0002_irq_unmask,
> - /*
> - * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
> - * and we don't want to mess with the ACPI SCI irq settings.
> - */
> - .flags = IRQCHIP_SKIP_SET_WAKE,
> -};
> -
> static const struct x86_cpu_id int0002_cpu_ids[] = {
> INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
> - INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
> + INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_byt_irqchip), /* Braswell, Cherry Trail */
> {}
> };
>
> @@ -181,6 +169,10 @@ static int int0002_probe(struct platform_device *pdev)
> if (!cpu_id)
> return -ENODEV;
>
> + /* We only need to directly deal with PMEs when using s2idle */
> + if (!pm_suspend_default_s2idle())
> + return -ENODEV;
> +
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> return irq;
>
On Wed, Apr 8, 2020 at 1:24 AM Hans de Goede <[email protected]> wrote:
>
> Hi all,
>
> I just realized that I should have added a cover letter to this
> patch to discuss how to merge it.
>
> Rafael has already queued up the
> "[PATCH v3 2/2] platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()"
> in his tree. Looking at both patches the parts of the file the
> touch are different enough that that should not be a problem though.
>
> So I guess this can go through platform/x86 as usual, or
> (assuming everyone is ok with the change itself) alternatively
> Rafael can take it to make sure there will be no conflicts?
You will need different patches for v5.7 and the rest.
In v5.7 new CPU macros are in use.
--
With Best Regards,
Andy Shevchenko
On Wed, Apr 8, 2020 at 12:31 AM Hans de Goede <[email protected]> wrote:
>
> Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
> irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
> the parents IRQ because this was breaking suspend (causing immediate
> wakeups) on an Asus E202SA.
>
> This workaround for this issue is mostly fine, on most Cherry Trail
> devices where we need the INT0002 device for wakeups by e.g. USB kbds,
> the parent IRQ is shared with the ACPI SCI and that is marked as wakeup
> anyways.
>
> But not on all devices, specifically on a Medion Akoya E1239T there is
> no SCI at all, and because the irq_set_wake request is not passed on to
> the parent IRQ, wake up by the builtin USB kbd does not work here.
>
> So the workaround for the Asus E202SA immediate wake problem is causing
> problems elsewhere; and in hindsight it is not the correct fix,
> the Asus E202SA uses Airmont CPU cores, but this does not mean it is a
> Cherry Trail based device, Brasswell uses Airmont CPU cores too and this
> actually is a Braswell device.
>
> Most (all?) Braswell devices use classic S3 mode suspend rather then
> s2idle suspend and in this case directly dealing with PME events as
> the INT0002 driver does likely is not the best idea, so that this is
> causing issues is not surprising.
>
> Replace the workaround of not passing irq_set_wake requests on to the
> parents IRQ, by not binding to the INT0002 device when s2idle is not used.
> This fixes USB kbd wakeups not working on some Cherry Trail devices,
> while still avoiding mucking with the wakeup flags on the Asus E202SA
> (and other Brasswell devices).
I tested this patch over kernel 5.6.2 on Asus E202SA and didn't notice
any regressions. Wakeup by opening lid, by pressing a button on
keyboard, by USB keyboard — all seem to work fine. So, if appropriate:
Tested-by: Maxim Mikityanskiy <[email protected]>
I have a question though. After your patch this driver will basically
be a no-op on my laptop. Does it mean I don't even need it in the
first place? What about the IRQ storm this driver is meant to deal
with — does it never happen on Braswell? What are the reproduction
steps to verify my hardware is not affected? I have that INT0002
device, so I'm worried it may cause issues if not bound to the driver.
> Cc: Maxim Mikityanskiy <[email protected]>
> Cc: 5.3+ <[email protected]> # 5.3+
> Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
> Signed-off-by: Hans de Goede <[email protected]>
> ---
> drivers/platform/x86/intel_int0002_vgpio.c | 18 +++++-------------
> 1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
> index 55f088f535e2..e8bec72d3823 100644
> --- a/drivers/platform/x86/intel_int0002_vgpio.c
> +++ b/drivers/platform/x86/intel_int0002_vgpio.c
> @@ -143,21 +143,9 @@ static struct irq_chip int0002_byt_irqchip = {
> .irq_set_wake = int0002_irq_set_wake,
> };
>
> -static struct irq_chip int0002_cht_irqchip = {
> - .name = DRV_NAME,
> - .irq_ack = int0002_irq_ack,
> - .irq_mask = int0002_irq_mask,
> - .irq_unmask = int0002_irq_unmask,
> - /*
> - * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
> - * and we don't want to mess with the ACPI SCI irq settings.
> - */
> - .flags = IRQCHIP_SKIP_SET_WAKE,
> -};
> -
> static const struct x86_cpu_id int0002_cpu_ids[] = {
> INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
> - INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
> + INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_byt_irqchip), /* Braswell, Cherry Trail */
> {}
> };
>
> @@ -181,6 +169,10 @@ static int int0002_probe(struct platform_device *pdev)
> if (!cpu_id)
> return -ENODEV;
>
> + /* We only need to directly deal with PMEs when using s2idle */
> + if (!pm_suspend_default_s2idle())
> + return -ENODEV;
> +
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> return irq;
> --
> 2.26.0
>
On Wednesday, April 8, 2020 12:23:53 AM CEST Hans de Goede wrote:
> Hi all,
>
> I just realized that I should have added a cover letter to this
> patch to discuss how to merge it.
>
> Rafael has already queued up the
> "[PATCH v3 2/2] platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()"
This has been merged by Linus already.
> in his tree. Looking at both patches the parts of the file the
> touch are different enough that that should not be a problem though.
>
> So I guess this can go through platform/x86 as usual, or
> (assuming everyone is ok with the change itself) alternatively
> Rafael can take it to make sure there will be no conflicts?
Just merge it through platform-x86.
Cheers!
Hi,
On 4/8/20 12:26 AM, Andy Shevchenko wrote:
> On Wed, Apr 8, 2020 at 1:24 AM Hans de Goede <[email protected]> wrote:
>>
>> Hi all,
>>
>> I just realized that I should have added a cover letter to this
>> patch to discuss how to merge it.
>>
>> Rafael has already queued up the
>> "[PATCH v3 2/2] platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()"
>> in his tree. Looking at both patches the parts of the file the
>> touch are different enough that that should not be a problem though.
>>
>> So I guess this can go through platform/x86 as usual, or
>> (assuming everyone is ok with the change itself) alternatively
>> Rafael can take it to make sure there will be no conflicts?
>
> You will need different patches for v5.7 and the rest.
> In v5.7 new CPU macros are in use.
I see, I will send out a v2 rebased on top of 5.7-rc1.
Regards,
Hans
Hi,
On 4/8/20 2:11 PM, Maxim Mikityanskiy wrote:
> On Wed, Apr 8, 2020 at 12:31 AM Hans de Goede <[email protected]> wrote:
>>
>> Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
>> irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
>> the parents IRQ because this was breaking suspend (causing immediate
>> wakeups) on an Asus E202SA.
>>
>> This workaround for this issue is mostly fine, on most Cherry Trail
>> devices where we need the INT0002 device for wakeups by e.g. USB kbds,
>> the parent IRQ is shared with the ACPI SCI and that is marked as wakeup
>> anyways.
>>
>> But not on all devices, specifically on a Medion Akoya E1239T there is
>> no SCI at all, and because the irq_set_wake request is not passed on to
>> the parent IRQ, wake up by the builtin USB kbd does not work here.
>>
>> So the workaround for the Asus E202SA immediate wake problem is causing
>> problems elsewhere; and in hindsight it is not the correct fix,
>> the Asus E202SA uses Airmont CPU cores, but this does not mean it is a
>> Cherry Trail based device, Brasswell uses Airmont CPU cores too and this
>> actually is a Braswell device.
>>
>> Most (all?) Braswell devices use classic S3 mode suspend rather then
>> s2idle suspend and in this case directly dealing with PME events as
>> the INT0002 driver does likely is not the best idea, so that this is
>> causing issues is not surprising.
>>
>> Replace the workaround of not passing irq_set_wake requests on to the
>> parents IRQ, by not binding to the INT0002 device when s2idle is not used.
>> This fixes USB kbd wakeups not working on some Cherry Trail devices,
>> while still avoiding mucking with the wakeup flags on the Asus E202SA
>> (and other Brasswell devices).
>
> I tested this patch over kernel 5.6.2 on Asus E202SA and didn't notice
> any regressions. Wakeup by opening lid, by pressing a button on
> keyboard, by USB keyboard — all seem to work fine. So, if appropriate:
>
> Tested-by: Maxim Mikityanskiy <[email protected]>
Thank you for testing this.
> I have a question though. After your patch this driver will basically
> be a no-op on my laptop. Does it mean I don't even need it in the
> first place? What about the IRQ storm this driver is meant to deal
> with — does it never happen on Braswell? What are the reproduction
> steps to verify my hardware is not affected? I have that INT0002
> device, so I'm worried it may cause issues if not bound to the driver.
I do not expect Braswell platforms to suffer from the IRQ storm
issue. That was something which I hit on a Cherry Trail based device.
To test this, try waking up the device from suspend by an USB attached
keyboard (this may not work, in that case wake it some other way).
After this do:
cat /proc/interrupts | grep " 9-fasteoi"
This should output something like this:
[root@localhost ~]# cat /proc/interrupts | grep " 9-fasteoi"
9: 0 0 0 0 IO-APIC 9-fasteoi acpi
Repeat this a couple of times, of the numbers after the 9:
increase (very) rapidly you have an interrupt storm. Likely
they will either be fully unchanged or change very slowly.
Note if nothing is output then IRQ 9 is not used on your
model, then the INT0002 device cannot cause an interrupt storm.
Regards,
Hans
>
>> Cc: Maxim Mikityanskiy <[email protected]>
>> Cc: 5.3+ <[email protected]> # 5.3+
>> Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
>> Signed-off-by: Hans de Goede <[email protected]>
>> ---
>> drivers/platform/x86/intel_int0002_vgpio.c | 18 +++++-------------
>> 1 file changed, 5 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
>> index 55f088f535e2..e8bec72d3823 100644
>> --- a/drivers/platform/x86/intel_int0002_vgpio.c
>> +++ b/drivers/platform/x86/intel_int0002_vgpio.c
>> @@ -143,21 +143,9 @@ static struct irq_chip int0002_byt_irqchip = {
>> .irq_set_wake = int0002_irq_set_wake,
>> };
>>
>> -static struct irq_chip int0002_cht_irqchip = {
>> - .name = DRV_NAME,
>> - .irq_ack = int0002_irq_ack,
>> - .irq_mask = int0002_irq_mask,
>> - .irq_unmask = int0002_irq_unmask,
>> - /*
>> - * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
>> - * and we don't want to mess with the ACPI SCI irq settings.
>> - */
>> - .flags = IRQCHIP_SKIP_SET_WAKE,
>> -};
>> -
>> static const struct x86_cpu_id int0002_cpu_ids[] = {
>> INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
>> - INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
>> + INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_byt_irqchip), /* Braswell, Cherry Trail */
>> {}
>> };
>>
>> @@ -181,6 +169,10 @@ static int int0002_probe(struct platform_device *pdev)
>> if (!cpu_id)
>> return -ENODEV;
>>
>> + /* We only need to directly deal with PMEs when using s2idle */
>> + if (!pm_suspend_default_s2idle())
>> + return -ENODEV;
>> +
>> irq = platform_get_irq(pdev, 0);
>> if (irq < 0)
>> return irq;
>> --
>> 2.26.0
>>
>
On Tue, Apr 14, 2020 at 4:24 PM Hans de Goede <[email protected]> wrote:
>
> Hi,
>
> On 4/8/20 2:11 PM, Maxim Mikityanskiy wrote:
> > On Wed, Apr 8, 2020 at 12:31 AM Hans de Goede <[email protected]> wrote:
> >>
> >> Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
> >> irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
> >> the parents IRQ because this was breaking suspend (causing immediate
> >> wakeups) on an Asus E202SA.
> >>
> >> This workaround for this issue is mostly fine, on most Cherry Trail
> >> devices where we need the INT0002 device for wakeups by e.g. USB kbds,
> >> the parent IRQ is shared with the ACPI SCI and that is marked as wakeup
> >> anyways.
> >>
> >> But not on all devices, specifically on a Medion Akoya E1239T there is
> >> no SCI at all, and because the irq_set_wake request is not passed on to
> >> the parent IRQ, wake up by the builtin USB kbd does not work here.
> >>
> >> So the workaround for the Asus E202SA immediate wake problem is causing
> >> problems elsewhere; and in hindsight it is not the correct fix,
> >> the Asus E202SA uses Airmont CPU cores, but this does not mean it is a
> >> Cherry Trail based device, Brasswell uses Airmont CPU cores too and this
> >> actually is a Braswell device.
> >>
> >> Most (all?) Braswell devices use classic S3 mode suspend rather then
> >> s2idle suspend and in this case directly dealing with PME events as
> >> the INT0002 driver does likely is not the best idea, so that this is
> >> causing issues is not surprising.
> >>
> >> Replace the workaround of not passing irq_set_wake requests on to the
> >> parents IRQ, by not binding to the INT0002 device when s2idle is not used.
> >> This fixes USB kbd wakeups not working on some Cherry Trail devices,
> >> while still avoiding mucking with the wakeup flags on the Asus E202SA
> >> (and other Brasswell devices).
> >
> > I tested this patch over kernel 5.6.2 on Asus E202SA and didn't notice
> > any regressions. Wakeup by opening lid, by pressing a button on
> > keyboard, by USB keyboard — all seem to work fine. So, if appropriate:
> >
> > Tested-by: Maxim Mikityanskiy <[email protected]>
>
> Thank you for testing this.
>
> > I have a question though. After your patch this driver will basically
> > be a no-op on my laptop. Does it mean I don't even need it in the
> > first place? What about the IRQ storm this driver is meant to deal
> > with — does it never happen on Braswell? What are the reproduction
> > steps to verify my hardware is not affected? I have that INT0002
> > device, so I'm worried it may cause issues if not bound to the driver.
>
> I do not expect Braswell platforms to suffer from the IRQ storm
> issue. That was something which I hit on a Cherry Trail based device.
>
> To test this, try waking up the device from suspend by an USB attached
> keyboard (this may not work, in that case wake it some other way).
>
> After this do:
>
> cat /proc/interrupts | grep " 9-fasteoi"
>
> This should output something like this:
>
> [root@localhost ~]# cat /proc/interrupts | grep " 9-fasteoi"
> 9: 0 0 0 0 IO-APIC 9-fasteoi acpi
>
> Repeat this a couple of times, of the numbers after the 9:
> increase (very) rapidly you have an interrupt storm. Likely
> they will either be fully unchanged or change very slowly.
Thanks a lot for the instructions. After a wakeup by USB keyboard, the
counter increased by a few hundred (compared to the value before
suspend), but there was no further growth, so it looks I'm safe.
(Tested with your patch, of course.)
> Note if nothing is output then IRQ 9 is not used on your
> model, then the INT0002 device cannot cause an interrupt storm.
>
> Regards,
>
> Hans
>
>
>
> >
> >> Cc: Maxim Mikityanskiy <[email protected]>
> >> Cc: 5.3+ <[email protected]> # 5.3+
> >> Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
> >> Signed-off-by: Hans de Goede <[email protected]>
> >> ---
> >> drivers/platform/x86/intel_int0002_vgpio.c | 18 +++++-------------
> >> 1 file changed, 5 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
> >> index 55f088f535e2..e8bec72d3823 100644
> >> --- a/drivers/platform/x86/intel_int0002_vgpio.c
> >> +++ b/drivers/platform/x86/intel_int0002_vgpio.c
> >> @@ -143,21 +143,9 @@ static struct irq_chip int0002_byt_irqchip = {
> >> .irq_set_wake = int0002_irq_set_wake,
> >> };
> >>
> >> -static struct irq_chip int0002_cht_irqchip = {
> >> - .name = DRV_NAME,
> >> - .irq_ack = int0002_irq_ack,
> >> - .irq_mask = int0002_irq_mask,
> >> - .irq_unmask = int0002_irq_unmask,
> >> - /*
> >> - * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
> >> - * and we don't want to mess with the ACPI SCI irq settings.
> >> - */
> >> - .flags = IRQCHIP_SKIP_SET_WAKE,
> >> -};
> >> -
> >> static const struct x86_cpu_id int0002_cpu_ids[] = {
> >> INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip), /* Valleyview, Bay Trail */
> >> - INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip), /* Braswell, Cherry Trail */
> >> + INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_byt_irqchip), /* Braswell, Cherry Trail */
> >> {}
> >> };
> >>
> >> @@ -181,6 +169,10 @@ static int int0002_probe(struct platform_device *pdev)
> >> if (!cpu_id)
> >> return -ENODEV;
> >>
> >> + /* We only need to directly deal with PMEs when using s2idle */
> >> + if (!pm_suspend_default_s2idle())
> >> + return -ENODEV;
> >> +
> >> irq = platform_get_irq(pdev, 0);
> >> if (irq < 0)
> >> return irq;
> >> --
> >> 2.26.0
> >>
> >
>