fdt_appendprop_addrrange() function adds a property, with the given name,
to the device tree at the given node offset, and also sets the address
and size of the property. This function should be used to add
"linux,ima-kexec-buffer" property to the device tree and set the address
and size of the IMA measurement buffer, instead of using custom function.
Use fdt_appendprop_addrrange() to add "linux,ima-kexec-buffer" property
to the device tree. This property holds the address and size of
the IMA measurement buffer that needs to be passed from the current
kernel to the next kernel across kexec system call.
Remove custom code that is used in setup_ima_buffer() to add
"linux,ima-kexec-buffer" property to the device tree.
Signed-off-by: Lakshmi Ramasubramanian <[email protected]>
---
arch/powerpc/kexec/ima.c | 51 ++++++----------------------------------
1 file changed, 7 insertions(+), 44 deletions(-)
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 720e50e490b6..d579d3da4715 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/memblock.h>
#include <linux/libfdt.h>
+#include <asm/ima.h>
static int get_addr_size_cells(int *addr_cells, int *size_cells)
{
@@ -145,27 +146,6 @@ int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
return 0;
}
-static int write_number(void *p, u64 value, int cells)
-{
- if (cells == 1) {
- u32 tmp;
-
- if (value > U32_MAX)
- return -EINVAL;
-
- tmp = cpu_to_be32(value);
- memcpy(p, &tmp, sizeof(tmp));
- } else if (cells == 2) {
- u64 tmp;
-
- tmp = cpu_to_be64(value);
- memcpy(p, &tmp, sizeof(tmp));
- } else
- return -EINVAL;
-
- return 0;
-}
-
/**
* setup_ima_buffer - add IMA buffer information to the fdt
* @image: kexec image being loaded.
@@ -176,35 +156,18 @@ static int write_number(void *p, u64 value, int cells)
*/
int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
{
- int ret, addr_cells, size_cells, entry_size;
- u8 value[16];
+ int ret;
remove_ima_buffer(fdt, chosen_node);
if (!image->arch.ima_buffer_size)
return 0;
- ret = get_addr_size_cells(&addr_cells, &size_cells);
+ ret = fdt_appendprop_addrrange(fdt, 0, chosen_node,
+ "linux,ima-kexec-buffer",
+ image->arch.ima_buffer_addr,
+ image->arch.ima_buffer_size);
if (ret)
- return ret;
-
- entry_size = 4 * (addr_cells + size_cells);
-
- if (entry_size > sizeof(value))
- return -EINVAL;
-
- ret = write_number(value, image->arch.ima_buffer_addr, addr_cells);
- if (ret)
- return ret;
-
- ret = write_number(value + 4 * addr_cells, image->arch.ima_buffer_size,
- size_cells);
- if (ret)
- return ret;
-
- ret = fdt_setprop(fdt, chosen_node, "linux,ima-kexec-buffer", value,
- entry_size);
- if (ret < 0)
- return -EINVAL;
+ return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL);
ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
image->arch.ima_buffer_size);
--
2.29.2
On 12/17/20 9:37 AM, Lakshmi Ramasubramanian wrote:
> fdt_appendprop_addrrange() function adds a property, with the given name,
> to the device tree at the given node offset, and also sets the address
> and size of the property. This function should be used to add
> "linux,ima-kexec-buffer" property to the device tree and set the address
> and size of the IMA measurement buffer, instead of using custom function.
>
Typo in the email address of James Morse (ARM.com). Sorry about that.
Adding the correct email address.
-lakshmi
> Use fdt_appendprop_addrrange() to add "linux,ima-kexec-buffer" property
> to the device tree. This property holds the address and size of
> the IMA measurement buffer that needs to be passed from the current
> kernel to the next kernel across kexec system call.
>
> Remove custom code that is used in setup_ima_buffer() to add
> "linux,ima-kexec-buffer" property to the device tree.
>
> Signed-off-by: Lakshmi Ramasubramanian <[email protected]>
> ---
> arch/powerpc/kexec/ima.c | 51 ++++++----------------------------------
> 1 file changed, 7 insertions(+), 44 deletions(-)
>
> diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
> index 720e50e490b6..d579d3da4715 100644
> --- a/arch/powerpc/kexec/ima.c
> +++ b/arch/powerpc/kexec/ima.c
> @@ -11,6 +11,7 @@
> #include <linux/of.h>
> #include <linux/memblock.h>
> #include <linux/libfdt.h>
> +#include <asm/ima.h>
>
> static int get_addr_size_cells(int *addr_cells, int *size_cells)
> {
> @@ -145,27 +146,6 @@ int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
> return 0;
> }
>
> -static int write_number(void *p, u64 value, int cells)
> -{
> - if (cells == 1) {
> - u32 tmp;
> -
> - if (value > U32_MAX)
> - return -EINVAL;
> -
> - tmp = cpu_to_be32(value);
> - memcpy(p, &tmp, sizeof(tmp));
> - } else if (cells == 2) {
> - u64 tmp;
> -
> - tmp = cpu_to_be64(value);
> - memcpy(p, &tmp, sizeof(tmp));
> - } else
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> /**
> * setup_ima_buffer - add IMA buffer information to the fdt
> * @image: kexec image being loaded.
> @@ -176,35 +156,18 @@ static int write_number(void *p, u64 value, int cells)
> */
> int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
> {
> - int ret, addr_cells, size_cells, entry_size;
> - u8 value[16];
> + int ret;
>
> remove_ima_buffer(fdt, chosen_node);
> if (!image->arch.ima_buffer_size)
> return 0;
>
> - ret = get_addr_size_cells(&addr_cells, &size_cells);
> + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node,
> + "linux,ima-kexec-buffer",
> + image->arch.ima_buffer_addr,
> + image->arch.ima_buffer_size);
> if (ret)
> - return ret;
> -
> - entry_size = 4 * (addr_cells + size_cells);
> -
> - if (entry_size > sizeof(value))
> - return -EINVAL;
> -
> - ret = write_number(value, image->arch.ima_buffer_addr, addr_cells);
> - if (ret)
> - return ret;
> -
> - ret = write_number(value + 4 * addr_cells, image->arch.ima_buffer_size,
> - size_cells);
> - if (ret)
> - return ret;
> -
> - ret = fdt_setprop(fdt, chosen_node, "linux,ima-kexec-buffer", value,
> - entry_size);
> - if (ret < 0)
> - return -EINVAL;
> + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL);
>
> ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
> image->arch.ima_buffer_size);
>