[permalink] [raw]

Subject: Re: [PATCH v6 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0

On 5/10/2023 9:39 PM, Dmitry Baryshkov wrote:
> On 11/05/2023 07:38, Abhinav Kumar wrote:
>>
>>
>> On 5/10/2023 9:29 PM, Dmitry Baryshkov wrote:
>>> On 11/05/2023 01:07, Kuogee Hsieh wrote:
>>>> DPU < 7.0.0 requires the PINGPONG block to be involved during
>>>> DSC setting up. Since DPU >= 7.0.0, enabling and starting the DSC
>>>> encoder engine moved to INTF with the help of the flush mechanism.
>>>
>>> Nit: was moved.
>>>
>>>> Add a DPU_PINGPONG_DSC feature bit to restrict the availability of
>>>> dpu_hw_pp_setup_dsc() and dpu_hw_pp_dsc_{enable,disable}() on the
>>>> PINGPONG block to DPU < 7.0.0 hardware, as the registers are not
>>>> available [in the PINGPONG block] on DPU 7.0.0 and higher anymore.
>>>
>>> this looks good
>>>
>>>> Existing call-sites to these callbacks already skip calling into
>>>> them if the function pointer is NULL.
>>>
>>> This is more relevant for patch 3 commit message.
>>>
>>>> Add DPU_PINGPONG_DSC feature
>>>> bit to all chipset with DPU < 7.0.0.
>>>
>>> This is incorrect, as we do not change the catalog in this patch.
>>>
>>
>> Sorry but why not? The changes done to dpu_hw_catalog.c do exactly that.
>
> Because the patch does not add this feature bit to any of the chipsets.
> I think the relevant patch was lost somewhere during the rework/rebase.
>
>
>

This is adding it right?

#define PINGPONG_SDM845_MASK \
- (BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE))
+ (BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_TE) |
BIT(DPU_PINGPONG_DSC))
#define PINGPONG_SDM845_TE2_MASK \

2023-05-11 05:22:24

by Dmitry Baryshkov

[permalink] [raw]

Subject: Re: [PATCH v6 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled

On 11/05/2023 01:07, Kuogee Hsieh wrote:
> Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
> dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
> to tear down DSC data path if DSC data path was setup previous.
>
> Signed-off-by: Kuogee Hsieh <[email protected]>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 44 +++++++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++++
> 2 files changed, 51 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 94b805b..6500589 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1214,6 +1214,45 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc,
> mutex_unlock(&dpu_enc->enc_lock);
> }
>
> +static void dpu_encoder_dsc_pipe_clr(struct dpu_encoder_virt *dpu_enc,
> + struct dpu_hw_dsc *hw_dsc,
> + struct dpu_hw_pingpong *hw_pp)
> +{
> + struct dpu_encoder_phys *cur_master = dpu_enc->cur_master;
> + struct dpu_hw_ctl *ctl;
> +
> + ctl = cur_master->hw_ctl;
> +
> + if (hw_dsc->ops.dsc_disable)
> + hw_dsc->ops.dsc_disable(hw_dsc);
> +
> + if (hw_pp->ops.disable_dsc)
> + hw_pp->ops.disable_dsc(hw_pp);
> +
> + if (hw_dsc->ops.dsc_bind_pingpong_blk)
> + hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
> +
> + if (ctl->ops.update_pending_flush_dsc)
> + ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> +}
> +
> +static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
> +{
> + /* coding only for 2LM, 2enc, 1 dsc config */
> + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> + int i;
> +
> + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> + hw_pp[i] = dpu_enc->hw_pp[i];
> + hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> + if (hw_pp[i] && hw_dsc[i])
> + dpu_encoder_dsc_pipe_clr(dpu_enc, hw_dsc[i], hw_pp[i]);
> + }
> +
> +}
> +
> static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> struct drm_atomic_state *state)
> {
> @@ -2090,6 +2129,9 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> phys_enc->hw_pp->merge_3d->idx);
> }
>
> + if (dpu_enc->dsc)
> + dpu_encoder_unprep_dsc(dpu_enc);
> +
> intf_cfg.stream_sel = 0; /* Don't care value for video mode */
> intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>
> @@ -2101,6 +2143,8 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> if (phys_enc->hw_pp->merge_3d)
> intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
>
> + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +
> if (ctl->ops.reset_intf_cfg)
> ctl->ops.reset_intf_cfg(ctl, &intf_cfg);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 832a6a7..b34dac5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -577,6 +577,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 wb_active = 0;
> u32 merge3d_active = 0;
> + u32 dsc_active;
>
> /*
> * This API resets each portion of the CTL path namely,
> @@ -606,6 +607,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> wb_active &= ~BIT(cfg->wb - WB_0);
> DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
> }
> +
> + if (cfg->dsc) {
> + dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
> + dsc_active &= ~cfg->dsc;
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
> + }
> }
>
> static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,

--
With best wishes
Dmitry

2023-05-11 05:33:00

by Dmitry Baryshkov

[permalink] [raw]

Subject: Re: [PATCH v6 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine

On 11/05/2023 01:07, Kuogee Hsieh wrote:
> Add support for DSC 1.2 by providing the necessary hooks to program
> the DPU DSC 1.2 encoder.
>
> Changes in v3:
> -- fixed kernel test rebot report that "__iomem *off" is declared but not
> used at dpu_hw_dsc_config_1_2()
> -- unrolling thresh loops
>
> Changes in v4:
> -- delete DPU_DSC_HW_REV_1_1
> -- delete off and used real register name directly
>
> Reported-by: kernel test robot <[email protected]>
> Signed-off-by: Kuogee Hsieh <[email protected]>
> ---
> drivers/gpu/drm/msm/Makefile | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 32 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h | 14 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385 +++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 7 +-
> 5 files changed, 435 insertions(+), 4 deletions(-)
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index b814fc8..b9af5e4 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
> disp/dpu1/dpu_hw_catalog.o \
> disp/dpu1/dpu_hw_ctl.o \
> disp/dpu1/dpu_hw_dsc.o \
> + disp/dpu1/dpu_hw_dsc_1_2.o \
> disp/dpu1/dpu_hw_interrupts.o \
> disp/dpu1/dpu_hw_intf.o \
> disp/dpu1/dpu_hw_lm.o \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index dc0a4da..4eda2cc 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -1,6 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0-only */
> /*
> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
> * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
> */
>
> @@ -244,12 +244,18 @@ enum {
> };
>
> /**
> - * DSC features
> + * DSC sub-blocks/features
> * @DPU_DSC_OUTPUT_CTRL Configure which PINGPONG block gets
> * the pixel output from this DSC.
> + * @DPU_DSC_HW_REV_1_2 DSC block supports dsc 1.1 and 1.2
> + * @DPU_DSC_NATIVE_422_EN Supports native422 and native420 encoding
> + * @DPU_DSC_MAX
> */
> enum {
> DPU_DSC_OUTPUT_CTRL = 0x1,
> + DPU_DSC_HW_REV_1_2,
> + DPU_DSC_NATIVE_422_EN,
> + DPU_DSC_MAX
> };
>
> /**
> @@ -306,6 +312,14 @@ struct dpu_pp_blk {
> };
>
> /**
> + * struct dpu_dsc_blk - DSC Encoder sub-blk information
> + * @info: HW register and features supported by this sub-blk
> + */
> +struct dpu_dsc_blk {
> + DPU_HW_SUBBLK_INFO;
> +};
> +
> +/**
> * enum dpu_qos_lut_usage - define QoS LUT use cases
> */
> enum dpu_qos_lut_usage {
> @@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
> };
>
> /**
> + * struct dpu_dsc_sub_blks - DSC sub-blks
> + * @enc: DSC encoder sub block
> + * @ctl: DSC controller sub block
> + *
> + */
> +struct dpu_dsc_sub_blks {
> + struct dpu_dsc_blk enc;
> + struct dpu_dsc_blk ctl;
> +};
> +
> +/**
> * dpu_clk_ctrl_type - Defines top level clock control signals
> */
> enum dpu_clk_ctrl_type {
> @@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg {
> * struct dpu_dsc_cfg - information of DSC blocks
> * @id enum identifying this block
> * @base register offset of this block
> + * @len: length of hardware block
> * @features bit mask identifying sub-blocks/features
> + * @sblk sub-blocks information
> */
> struct dpu_dsc_cfg {
> DPU_HW_BLK_INFO;
> + const struct dpu_dsc_sub_blks *sblk;
> };
>
> /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> index 138080a..bdff74d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> @@ -1,5 +1,8 @@
> /* SPDX-License-Identifier: GPL-2.0-only */
> -/* Copyright (c) 2020-2022, Linaro Limited */
> +/*
> + * Copyright (c) 2020-2022, Linaro Limited
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
> + */
>
> #ifndef _DPU_HW_DSC_H
> #define _DPU_HW_DSC_H
> @@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct dpu_dsc_cfg *cfg,
> void __iomem *addr);
>
> /**
> + * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
> + * @cfg: DSC catalog entry for which driver object is required
> + * @addr: Mapped register io address of MDP
> + * Returns: Error code or allocated dpu_hw_dsc context
> + */
> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
> + void __iomem *addr);
> +
> +/**
> * dpu_hw_dsc_destroy - destroys dsc driver context
> * @dsc: Pointer to dsc driver context returned by dpu_hw_dsc_init
> */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
> new file mode 100644
> index 00000000..0c77c85
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
> @@ -0,0 +1,385 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
> + */
> +
> +#include <drm/display/drm_dsc_helper.h>
> +
> +#include "dpu_kms.h"
> +#include "dpu_hw_catalog.h"
> +#include "dpu_hwio.h"
> +#include "dpu_hw_mdss.h"
> +#include "dpu_hw_dsc.h"
> +
> +#define DSC_CMN_MAIN_CNF 0x00
> +
> +/* DPU_DSC_ENC register offsets */
> +#define ENC_DF_CTRL 0x00
> +#define ENC_GENERAL_STATUS 0x04
> +#define ENC_HSLICE_STATUS 0x08
> +#define ENC_OUT_STATUS 0x0C
> +#define ENC_INT_STAT 0x10
> +#define ENC_INT_CLR 0x14
> +#define ENC_INT_MASK 0x18
> +#define DSC_MAIN_CONF 0x30
> +#define DSC_PICTURE_SIZE 0x34
> +#define DSC_SLICE_SIZE 0x38
> +#define DSC_MISC_SIZE 0x3C
> +#define DSC_HRD_DELAYS 0x40
> +#define DSC_RC_SCALE 0x44
> +#define DSC_RC_SCALE_INC_DEC 0x48
> +#define DSC_RC_OFFSETS_1 0x4C
> +#define DSC_RC_OFFSETS_2 0x50
> +#define DSC_RC_OFFSETS_3 0x54
> +#define DSC_RC_OFFSETS_4 0x58
> +#define DSC_FLATNESS_QP 0x5C
> +#define DSC_RC_MODEL_SIZE 0x60
> +#define DSC_RC_CONFIG 0x64
> +#define DSC_RC_BUF_THRESH_0 0x68
> +#define DSC_RC_BUF_THRESH_1 0x6C
> +#define DSC_RC_BUF_THRESH_2 0x70
> +#define DSC_RC_BUF_THRESH_3 0x74
> +#define DSC_RC_MIN_QP_0 0x78
> +#define DSC_RC_MIN_QP_1 0x7C
> +#define DSC_RC_MIN_QP_2 0x80
> +#define DSC_RC_MAX_QP_0 0x84
> +#define DSC_RC_MAX_QP_1 0x88
> +#define DSC_RC_MAX_QP_2 0x8C
> +#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
> +#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
> +#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
> +
> +/* DPU_DSC_CTL register offsets */
> +#define DSC_CTL 0x00
> +#define DSC_CFG 0x04
> +#define DSC_DATA_IN_SWAP 0x08
> +#define DSC_CLK_CTRL 0x0C
> +
> +static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, int num_ss)
> +{
> + int max_addr = 2400 / num_ss;
> +
> + if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
> + max_addr /= 2;
> +
> + return max_addr - 1;
> +};
> +
> +static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
> +{
> + struct dpu_hw_blk_reg_map *hw;
> + u32 offset;
> +
> + if (!hw_dsc)
> + return;
> +
> + hw = &hw_dsc->hw;
> + offset = hw_dsc->caps->sblk->ctl.base;
> + DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
> +
> + offset = hw_dsc->caps->sblk->enc.base;
> + DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
> + DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);

This has the same problem as before. By looking at this line you can not
check where this write is targeted. Instead I'd suggest storing sblk in
the local variable and then using something like:

DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);

Same applies to other functions in this patch.

> +}
> +
> +static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
> + struct drm_dsc_config *dsc,
> + u32 mode,
> + u32 initial_lines)

Please indent to the opening brace. If using Vim, this is the "set
cino=(0" setting

> +{
> + struct dpu_hw_blk_reg_map *hw;
> + u32 offset;
> + u32 data = 0;
> + u32 det_thresh_flatness;
> + u32 num_active_ss_per_enc;

s/_ss_/_slice_/g

> + u32 bpp;
> +
> + if (!hw_dsc || !dsc)
> + return;
> +
> + hw = &hw_dsc->hw;
> +
> + offset = hw_dsc->caps->sblk->enc.base;
> +
> + if (mode & DSC_MODE_SPLIT_PANEL)
> + data |= BIT(0);
> +
> + if (mode & DSC_MODE_MULTIPLEX)
> + data |= BIT(1);
> +
> + num_active_ss_per_enc = dsc->slice_count;
> + if (mode & DSC_MODE_MULTIPLEX)
> + num_active_ss_per_enc = dsc->slice_count >> 1;
> +
> + data |= (num_active_ss_per_enc & 0x3) << 7;
> +
> + DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
> +
> + data = (initial_lines & 0xff);
> +
> + if (mode & DSC_MODE_VIDEO)
> + data |= BIT(9);
> +
> + data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) << 18);
> +
> + DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
> +
> + data = (dsc->dsc_version_minor & 0xf) << 28;
> + if (dsc->dsc_version_minor == 0x2) {
> + if (dsc->native_422)
> + data |= BIT(22);
> + if (dsc->native_420)
> + data |= BIT(21);
> + }
> +
> + bpp = dsc->bits_per_pixel;
> + /* as per hw requirement bpp should be programmed
> + * twice the actual value in case of 420 or 422 encoding
> + */
> + if (dsc->native_422 || dsc->native_420)
> + bpp = 2 * bpp;
> + data |= (dsc->block_pred_enable ? 1 : 0) << 20;
> + data |= bpp << 10;
> + data |= (dsc->line_buf_depth & 0xf) << 6;
> + data |= dsc->convert_rgb << 4;
> + data |= dsc->bits_per_component & 0xf;
> +
> + DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
> +
> + data = (dsc->pic_width & 0xffff) |
> + ((dsc->pic_height & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
> +
> + data = (dsc->slice_width & 0xffff) |
> + ((dsc->slice_height & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
> +
> + DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
> + (dsc->slice_chunk_size) & 0xffff);
> +
> + data = (dsc->initial_xmit_delay & 0xffff) |
> + ((dsc->initial_dec_delay & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
> + dsc->initial_scale_value & 0x3f);
> +
> + data = (dsc->scale_increment_interval & 0xffff) |
> + ((dsc->scale_decrement_interval & 0x7ff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
> +
> + data = (dsc->first_line_bpg_offset & 0x1f) |
> + ((dsc->second_line_bpg_offset & 0x1f) << 5);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
> +
> + data = (dsc->nfl_bpg_offset & 0xffff) |
> + ((dsc->slice_bpg_offset & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
> +
> + data = (dsc->initial_offset & 0xffff) |
> + ((dsc->final_offset & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
> +
> + data = (dsc->nsl_bpg_offset & 0xffff) |
> + ((dsc->second_line_offset_adj & 0xffff) << 16);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
> +
> + data = (dsc->flatness_min_qp & 0x1f);
> + data |= (dsc->flatness_max_qp & 0x1f) << 5;
> +
> + det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
> + data |= (det_thresh_flatness & 0xff) << 10;
> +
> + DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
> + (dsc->rc_model_size) & 0xffff);
> +
> + data = dsc->rc_edge_factor & 0xf;
> + data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
> + data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
> + data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
> + data |= (dsc->rc_tgt_offset_low & 0xf) << 24;

FIELD_PREP should become our friend. As the DPU driver does not use
generated headers/helpers, we should probably enforce its usage all over
the code.

> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_CONFIG, data);
> +
> + /* program the dsc wrapper */
> + offset = hw_dsc->caps->sblk->ctl.base;
> +
> + data = BIT(0); /* encoder enable */
> + if (dsc->native_422)
> + data |= BIT(8);
> + else if (dsc->native_420)
> + data |= BIT(9);
> + if (!dsc->convert_rgb)
> + data |= BIT(10);
> + if (dsc->bits_per_component == 8)
> + data |= BIT(11);
> + if (mode & DSC_MODE_SPLIT_PANEL)
> + data |= BIT(12);
> + if (mode & DSC_MODE_MULTIPLEX)
> + data |= BIT(13);
> + if (!(mode & DSC_MODE_VIDEO))
> + data |= BIT(17);
> +
> + DPU_REG_WRITE(hw, offset + DSC_CFG, data);
> +}
> +
> +static inline void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc *hw_dsc,
> + struct drm_dsc_config *dsc)

indent

> +{
> + struct dpu_hw_blk_reg_map *hw;
> + u32 offset;
> + struct drm_dsc_rc_range_parameters *rc;
> +
> + if (!hw_dsc || !dsc)
> + return;
> +
> + offset = hw_dsc->caps->sblk->enc.base;
> +
> + hw = &hw_dsc->hw;
> +
> + rc = dsc->rc_range_params;
> +
> + /*
> + * With BUF_THRESH -- 14 in total
> + * each register contains 4 thresh values with the last register
> + * containing only 2 thresh values
> + */
> + DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_0,
> + (dsc->rc_buf_thresh[0] << 0) |
> + (dsc->rc_buf_thresh[1] << 8) |
> + (dsc->rc_buf_thresh[2] << 16) |
> + (dsc->rc_buf_thresh[3] << 24));
> + DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_1,
> + (dsc->rc_buf_thresh[4] << 0) |
> + (dsc->rc_buf_thresh[5] << 8) |
> + (dsc->rc_buf_thresh[6] << 16) |
> + (dsc->rc_buf_thresh[7] << 24));
> + DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_2,
> + (dsc->rc_buf_thresh[8] << 0) |
> + (dsc->rc_buf_thresh[9] << 8) |
> + (dsc->rc_buf_thresh[10] << 16) |
> + (dsc->rc_buf_thresh[11] << 24));
> + DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_3,
> + (dsc->rc_buf_thresh[12] << 0) |
> + (dsc->rc_buf_thresh[13] << 8));
> +
> + /*
> + * with min/max_QP -- 5 bits each
> + * each register contains 5 min_qp or max_qp for total of 15
> + *
> + * With BPG_OFFSET -- 6 bits each
> + * each register contains 5 BPG_offset for total of 15
> + */
> + DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_0,
> + (rc[0].range_min_qp << 0) |
> + (rc[1].range_min_qp << 5) |
> + (rc[2].range_min_qp << 10) |
> + (rc[3].range_min_qp << 15) |
> + (rc[4].range_min_qp << 20));

This is over-indented.

> + DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_0,
> + (rc[0].range_max_qp << 0) |
> + (rc[1].range_max_qp << 5) |
> + (rc[2].range_max_qp << 10) |
> + (rc[3].range_max_qp << 15) |
> + (rc[4].range_max_qp << 20));
> + DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_0,
> + (rc[0].range_bpg_offset << 0) |
> + (rc[1].range_bpg_offset << 6) |
> + (rc[2].range_bpg_offset << 12) |
> + (rc[3].range_bpg_offset << 18) |
> + (rc[4].range_bpg_offset << 24));
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_1,
> + (rc[5].range_min_qp << 0) |
> + (rc[6].range_min_qp << 5) |
> + (rc[7].range_min_qp << 10) |
> + (rc[8].range_min_qp << 15) |
> + (rc[9].range_min_qp << 20));
> + DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_1,
> + (rc[5].range_max_qp << 0) |
> + (rc[6].range_max_qp << 5) |
> + (rc[7].range_max_qp << 10) |
> + (rc[8].range_max_qp << 15) |
> + (rc[9].range_max_qp << 20));
> + DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_1,
> + (rc[5].range_bpg_offset << 0) |
> + (rc[6].range_bpg_offset << 6) |
> + (rc[7].range_bpg_offset << 12) |
> + (rc[8].range_bpg_offset << 18) |
> + (rc[9].range_bpg_offset << 24));
> +
> + DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_2,
> + (rc[10].range_min_qp << 0) |
> + (rc[11].range_min_qp << 5) |
> + (rc[12].range_min_qp << 10) |
> + (rc[13].range_min_qp << 15) |
> + (rc[14].range_min_qp << 20));
> + DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_2,
> + (rc[10].range_max_qp << 0) |
> + (rc[11].range_max_qp << 5) |
> + (rc[12].range_max_qp << 10) |
> + (rc[13].range_max_qp << 15) |
> + (rc[14].range_max_qp << 20));
> + DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_2,
> + (rc[10].range_bpg_offset << 0) |
> + (rc[11].range_bpg_offset << 6) |
> + (rc[12].range_bpg_offset << 12) |
> + (rc[13].range_bpg_offset << 18) |
> + (rc[14].range_bpg_offset << 24));
> +}
> +
> +static inline void dpu_hw_dsc_bind_pingpong_blk_1_2(
> + struct dpu_hw_dsc *hw_dsc,
> + const enum dpu_pingpong pp)
> +{
> + struct dpu_hw_blk_reg_map *hw;
> + int offset;
> + int mux_cfg = 0xf; /* Disabled */
> +
> + offset = hw_dsc->caps->sblk->ctl.base;
> +
> + hw = &hw_dsc->hw;
> + if (pp)
> + mux_cfg = (pp - PINGPONG_0) & 0x7;
> +
> + DPU_REG_WRITE(hw, offset + DSC_CTL, mux_cfg);
> +}
> +
> +static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
> + const unsigned long features)
> +{
> + ops->dsc_disable = dpu_hw_dsc_disable_1_2;
> + ops->dsc_config = dpu_hw_dsc_config_1_2;
> + ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
> + ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
> +}
> +
> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
> + void __iomem *addr)
> +{
> + struct dpu_hw_dsc *c;
> +
> + c = kzalloc(sizeof(*c), GFP_KERNEL);
> + if (!c)
> + return ERR_PTR(-ENOMEM);
> +
> + c->hw.blk_addr = addr + cfg->base;
> + c->hw.log_mask = DPU_DBG_MASK_DSC;
> +
> + c->idx = cfg->id;
> + c->caps = cfg;
> + _setup_dcs_ops_1_2(&c->ops, c->caps->features);
> +
> + return c;
> +}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index f0fc704..502dd60 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> #define pr_fmt(fmt) "[drm:%s] " fmt, __func__
> @@ -246,7 +247,11 @@ int dpu_rm_init(struct dpu_rm *rm,
> struct dpu_hw_dsc *hw;
> const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
>
> - hw = dpu_hw_dsc_init(dsc, mmio);
> + if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
> + hw = dpu_hw_dsc_init_1_2(dsc, mmio);
> + else
> + hw = dpu_hw_dsc_init(dsc, mmio);
> +
> if (IS_ERR_OR_NULL(hw)) {
> rc = PTR_ERR(hw);
> DPU_ERROR("failed dsc object creation: err %d\n", rc);

--
With best wishes
Dmitry

2023-05-11 17:20:11

by Kuogee Hsieh

[permalink] [raw]

Subject: Re: [PATCH v6 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine

On 5/10/2023 9:52 PM, Dmitry Baryshkov wrote:
> On 11/05/2023 01:07, Kuogee Hsieh wrote:
>> Add support for DSC 1.2 by providing the necessary hooks to program
>> the DPU DSC 1.2 encoder.
>>
>> Changes in v3:
>> -- fixed kernel test rebot report that "__iomem *off" is declared but
>> not
>>     used at dpu_hw_dsc_config_1_2()
>> -- unrolling thresh loops
>>
>> Changes in v4:
>> -- delete DPU_DSC_HW_REV_1_1
>> -- delete off and used real register name directly
>>
>> Reported-by: kernel test robot <[email protected]>
>> Signed-off-by: Kuogee Hsieh <[email protected]>
>> ---
>> drivers/gpu/drm/msm/Makefile                   |   1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 32 +-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     | 14 +-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385
>> +++++++++++++++++++++++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
>> 5 files changed, 435 insertions(+), 4 deletions(-)
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index b814fc8..b9af5e4 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>>       disp/dpu1/dpu_hw_catalog.o \
>>       disp/dpu1/dpu_hw_ctl.o \
>>       disp/dpu1/dpu_hw_dsc.o \
>> +    disp/dpu1/dpu_hw_dsc_1_2.o \
>>       disp/dpu1/dpu_hw_interrupts.o \
>>       disp/dpu1/dpu_hw_intf.o \
>>       disp/dpu1/dpu_hw_lm.o \
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index dc0a4da..4eda2cc 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -1,6 +1,6 @@
>> /* SPDX-License-Identifier: GPL-2.0-only */
>> /*
>> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All
>> rights reserved.
>>    * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights
>> reserved.
>>    */
>> @@ -244,12 +244,18 @@ enum {
>> };
>> /**
>> - * DSC features
>> + * DSC sub-blocks/features
>>    * @DPU_DSC_OUTPUT_CTRL       Configure which PINGPONG block gets
>>    *                            the pixel output from this DSC.
>> + * @DPU_DSC_HW_REV_1_2        DSC block supports dsc 1.1 and 1.2
>> + * @DPU_DSC_NATIVE_422_EN     Supports native422 and native420 encoding
>> + * @DPU_DSC_MAX
>>    */
>> enum {
>>       DPU_DSC_OUTPUT_CTRL = 0x1,
>> +    DPU_DSC_HW_REV_1_2,
>> +    DPU_DSC_NATIVE_422_EN,
>> +    DPU_DSC_MAX
>> };
>> /**
>> @@ -306,6 +312,14 @@ struct dpu_pp_blk {
>> };
>> /**
>> + * struct dpu_dsc_blk - DSC Encoder sub-blk information
>> + * @info:   HW register and features supported by this sub-blk
>> + */
>> +struct dpu_dsc_blk {
>> +    DPU_HW_SUBBLK_INFO;
>> +};
>> +
>> +/**
>>    * enum dpu_qos_lut_usage - define QoS LUT use cases
>>    */
>> enum dpu_qos_lut_usage {
>> @@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
>> };
>> /**
>> + * struct dpu_dsc_sub_blks - DSC sub-blks
>> + * @enc: DSC encoder sub block
>> + * @ctl: DSC controller sub block
>> + *
>> + */
>> +struct dpu_dsc_sub_blks {
>> +    struct dpu_dsc_blk enc;
>> +    struct dpu_dsc_blk ctl;
>> +};
>> +
>> +/**
>>    * dpu_clk_ctrl_type - Defines top level clock control signals
>>    */
>> enum dpu_clk_ctrl_type {
>> @@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg {
>>    * struct dpu_dsc_cfg - information of DSC blocks
>>    * @id                 enum identifying this block
>>    * @base               register offset of this block
>> + * @len:               length of hardware block
>>    * @features           bit mask identifying sub-blocks/features
>> + * @sblk               sub-blocks information
>>    */
>> struct dpu_dsc_cfg {
>>       DPU_HW_BLK_INFO;
>> +    const struct dpu_dsc_sub_blks *sblk;
>> };
>> /**
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> index 138080a..bdff74d 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>> @@ -1,5 +1,8 @@
>> /* SPDX-License-Identifier: GPL-2.0-only */
>> -/* Copyright (c) 2020-2022, Linaro Limited */
>> +/*
>> + * Copyright (c) 2020-2022, Linaro Limited
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved
>> + */
>> #ifndef _DPU_HW_DSC_H
>> #define _DPU_HW_DSC_H
>> @@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct
>> dpu_dsc_cfg *cfg,
>>           void __iomem *addr);
>> /**
>> + * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
>> + * @cfg: DSC catalog entry for which driver object is required
>> + * @addr: Mapped register io address of MDP
>> + * Returns: Error code or allocated dpu_hw_dsc context
>> + */
>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>> +        void __iomem *addr);
>> +
>> +/**
>>    * dpu_hw_dsc_destroy - destroys dsc driver context
>>    * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
>>    */
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>> new file mode 100644
>> index 00000000..0c77c85
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>> @@ -0,0 +1,385 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved
>> + */
>> +
>> +#include <drm/display/drm_dsc_helper.h>
>> +
>> +#include "dpu_kms.h"
>> +#include "dpu_hw_catalog.h"
>> +#include "dpu_hwio.h"
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hw_dsc.h"
>> +
>> +#define DSC_CMN_MAIN_CNF           0x00
>> +
>> +/* DPU_DSC_ENC register offsets */
>> +#define ENC_DF_CTRL                0x00
>> +#define ENC_GENERAL_STATUS         0x04
>> +#define ENC_HSLICE_STATUS          0x08
>> +#define ENC_OUT_STATUS             0x0C
>> +#define ENC_INT_STAT               0x10
>> +#define ENC_INT_CLR                0x14
>> +#define ENC_INT_MASK               0x18
>> +#define DSC_MAIN_CONF              0x30
>> +#define DSC_PICTURE_SIZE           0x34
>> +#define DSC_SLICE_SIZE             0x38
>> +#define DSC_MISC_SIZE              0x3C
>> +#define DSC_HRD_DELAYS             0x40
>> +#define DSC_RC_SCALE               0x44
>> +#define DSC_RC_SCALE_INC_DEC       0x48
>> +#define DSC_RC_OFFSETS_1           0x4C
>> +#define DSC_RC_OFFSETS_2           0x50
>> +#define DSC_RC_OFFSETS_3           0x54
>> +#define DSC_RC_OFFSETS_4           0x58
>> +#define DSC_FLATNESS_QP            0x5C
>> +#define DSC_RC_MODEL_SIZE          0x60
>> +#define DSC_RC_CONFIG              0x64
>> +#define DSC_RC_BUF_THRESH_0        0x68
>> +#define DSC_RC_BUF_THRESH_1        0x6C
>> +#define DSC_RC_BUF_THRESH_2        0x70
>> +#define DSC_RC_BUF_THRESH_3        0x74
>> +#define DSC_RC_MIN_QP_0            0x78
>> +#define DSC_RC_MIN_QP_1            0x7C
>> +#define DSC_RC_MIN_QP_2            0x80
>> +#define DSC_RC_MAX_QP_0            0x84
>> +#define DSC_RC_MAX_QP_1            0x88
>> +#define DSC_RC_MAX_QP_2            0x8C
>> +#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
>> +#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
>> +#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
>> +
>> +/* DPU_DSC_CTL register offsets */
>> +#define DSC_CTL                    0x00
>> +#define DSC_CFG                    0x04
>> +#define DSC_DATA_IN_SWAP           0x08
>> +#define DSC_CLK_CTRL               0x0C
>> +
>> +static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc,
>> int num_ss)
>> +{
>> +    int max_addr = 2400 / num_ss;
>> +
>> +    if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
>> +        max_addr /= 2;
>> +
>> +    return max_addr - 1;
>> +};
>> +
>> +static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +
>> +    if (!hw_dsc)
>> +        return;
>> +
>> +    hw = &hw_dsc->hw;
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
>
> This has the same problem as before. By looking at this line you can
> not check where this write is targeted. Instead I'd suggest storing
> sblk in the local variable and then using something like:
>
> DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);
>
> Same applies to other functions in this patch.
>
>> +}
>> +
>> +static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
>> +                  struct drm_dsc_config *dsc,
>> +                  u32 mode,
>> +                  u32 initial_lines)
>
> Please indent to the opening brace. If using Vim, this is the "set
> cino=(0" setting
>
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +    u32 data = 0;
>> +    u32 det_thresh_flatness;
>> +    u32 num_active_ss_per_enc;
>
> s/_ss_/_slice_/g
>
>> +    u32 bpp;
>> +
>> +    if (!hw_dsc || !dsc)
>> +        return;
>> +
>> +    hw = &hw_dsc->hw;
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +
>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>> +        data |= BIT(0);
>> +
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        data |= BIT(1);
>> +
>> +    num_active_ss_per_enc = dsc->slice_count;
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        num_active_ss_per_enc = dsc->slice_count >> 1;
>> +
>> +    data |= (num_active_ss_per_enc & 0x3) << 7;
>> +
>> +    DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
>> +
>> +    data = (initial_lines & 0xff);
>> +
>> +    if (mode & DSC_MODE_VIDEO)
>> +        data |= BIT(9);
>> +
>> +    data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) <<
>> 18);
>> +
>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
>> +
>> +    data = (dsc->dsc_version_minor & 0xf) << 28;
>> +    if (dsc->dsc_version_minor == 0x2) {
>> +        if (dsc->native_422)
>> +            data |= BIT(22);
>> +        if (dsc->native_420)
>> +            data |= BIT(21);
>> +    }
>> +
>> +    bpp = dsc->bits_per_pixel;
>> +    /* as per hw requirement bpp should be programmed
>> +     * twice the actual value in case of 420 or 422 encoding
>> +     */
>> +    if (dsc->native_422 || dsc->native_420)
>> +        bpp = 2 * bpp;
>> +    data |= (dsc->block_pred_enable ? 1 : 0) << 20;
>> +    data |= bpp << 10;
>> +    data |= (dsc->line_buf_depth & 0xf) << 6;
>> +    data |= dsc->convert_rgb << 4;
>> +    data |= dsc->bits_per_component & 0xf;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
>> +
>> +    data = (dsc->pic_width & 0xffff) |
>> +        ((dsc->pic_height & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
>> +
>> +    data = (dsc->slice_width & 0xffff) |
>> +        ((dsc->slice_height & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
>> +            (dsc->slice_chunk_size) & 0xffff);
>> +
>> +    data = (dsc->initial_xmit_delay & 0xffff) |
>> +        ((dsc->initial_dec_delay & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
>> +            dsc->initial_scale_value & 0x3f);
>> +
>> +    data = (dsc->scale_increment_interval & 0xffff) |
>> +        ((dsc->scale_decrement_interval & 0x7ff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
>> +
>> +    data = (dsc->first_line_bpg_offset & 0x1f) |
>> +        ((dsc->second_line_bpg_offset & 0x1f) << 5);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
>> +
>> +    data = (dsc->nfl_bpg_offset & 0xffff) |
>> +        ((dsc->slice_bpg_offset & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
>> +
>> +    data = (dsc->initial_offset & 0xffff) |
>> +        ((dsc->final_offset & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
>> +
>> +    data = (dsc->nsl_bpg_offset & 0xffff) |
>> +        ((dsc->second_line_offset_adj & 0xffff) << 16);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
>> +
>> +    data = (dsc->flatness_min_qp & 0x1f);
>> +    data |= (dsc->flatness_max_qp & 0x1f) << 5;
>> +
>> +    det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
>> +    data |= (det_thresh_flatness & 0xff) << 10;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
>> +            (dsc->rc_model_size) & 0xffff);
>> +
>> +    data = dsc->rc_edge_factor & 0xf;
>> +    data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
>> +    data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
>> +    data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
>> +    data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
>
> FIELD_PREP should become our friend. As the DPU driver does not use
> generated headers/helpers, we should probably enforce its usage all
> over the code.

Agree, since this patch series have almost complete the review process.

can we start use FIELD_PREP at next?

>
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_CONFIG, data);
>> +
>> +    /* program the dsc wrapper */
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +
>> +    data = BIT(0); /* encoder enable */
>> +    if (dsc->native_422)
>> +        data |= BIT(8);
>> +    else if (dsc->native_420)
>> +        data |= BIT(9);
>> +    if (!dsc->convert_rgb)
>> +        data |= BIT(10);
>> +    if (dsc->bits_per_component == 8)
>> +        data |= BIT(11);
>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>> +        data |= BIT(12);
>> +    if (mode & DSC_MODE_MULTIPLEX)
>> +        data |= BIT(13);
>> +    if (!(mode & DSC_MODE_VIDEO))
>> +        data |= BIT(17);
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, data);
>> +}
>> +
>> +static inline void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc
>> *hw_dsc,
>> +                    struct drm_dsc_config *dsc)
>
> indent
>
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    u32 offset;
>> +    struct drm_dsc_rc_range_parameters *rc;
>> +
>> +    if (!hw_dsc || !dsc)
>> +        return;
>> +
>> +    offset = hw_dsc->caps->sblk->enc.base;
>> +
>> +    hw = &hw_dsc->hw;
>> +
>> +    rc = dsc->rc_range_params;
>> +
>> +    /*
>> +     * With BUF_THRESH -- 14 in total
>> +     * each register contains 4 thresh values with the last register
>> +     * containing only 2 thresh values
>> +     */
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_0,
>> +                    (dsc->rc_buf_thresh[0] << 0) |
>> +                    (dsc->rc_buf_thresh[1] << 8) |
>> +                    (dsc->rc_buf_thresh[2] << 16) |
>> +                    (dsc->rc_buf_thresh[3] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_1,
>> +                    (dsc->rc_buf_thresh[4] << 0) |
>> +                    (dsc->rc_buf_thresh[5] << 8) |
>> +                    (dsc->rc_buf_thresh[6] << 16) |
>> +                    (dsc->rc_buf_thresh[7] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_2,
>> +                    (dsc->rc_buf_thresh[8] << 0) |
>> +                    (dsc->rc_buf_thresh[9] << 8) |
>> +                    (dsc->rc_buf_thresh[10] << 16) |
>> +                    (dsc->rc_buf_thresh[11] << 24));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_BUF_THRESH_3,
>> +                    (dsc->rc_buf_thresh[12] << 0) |
>> +                    (dsc->rc_buf_thresh[13] << 8));
>> +
>> +    /*
>> +     * with min/max_QP -- 5 bits each
>> +     * each register contains 5 min_qp or max_qp for total of 15
>> +     *
>> +     * With BPG_OFFSET -- 6 bits each
>> +     * each register contains 5 BPG_offset for total of 15
>> +     */
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_0,
>> +                    (rc[0].range_min_qp << 0) |
>> +                    (rc[1].range_min_qp << 5) |
>> +                    (rc[2].range_min_qp << 10) |
>> +                    (rc[3].range_min_qp << 15) |
>> +                    (rc[4].range_min_qp << 20));
>
> This is over-indented.
>
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_0,
>> +                    (rc[0].range_max_qp << 0) |
>> +                    (rc[1].range_max_qp << 5) |
>> +                    (rc[2].range_max_qp << 10) |
>> +                    (rc[3].range_max_qp << 15) |
>> +                    (rc[4].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_0,
>> +                    (rc[0].range_bpg_offset << 0) |
>> +                    (rc[1].range_bpg_offset << 6) |
>> +                    (rc[2].range_bpg_offset << 12) |
>> +                    (rc[3].range_bpg_offset << 18) |
>> +                    (rc[4].range_bpg_offset << 24));
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_1,
>> +                    (rc[5].range_min_qp << 0) |
>> +                    (rc[6].range_min_qp << 5) |
>> +                    (rc[7].range_min_qp << 10) |
>> +                    (rc[8].range_min_qp << 15) |
>> +                    (rc[9].range_min_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_1,
>> +                    (rc[5].range_max_qp << 0) |
>> +                    (rc[6].range_max_qp << 5) |
>> +                    (rc[7].range_max_qp << 10) |
>> +                    (rc[8].range_max_qp << 15) |
>> +                    (rc[9].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_1,
>> +                    (rc[5].range_bpg_offset << 0) |
>> +                    (rc[6].range_bpg_offset << 6) |
>> +                    (rc[7].range_bpg_offset << 12) |
>> +                    (rc[8].range_bpg_offset << 18) |
>> +                    (rc[9].range_bpg_offset << 24));
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MIN_QP_2,
>> +                    (rc[10].range_min_qp << 0) |
>> +                    (rc[11].range_min_qp << 5) |
>> +                    (rc[12].range_min_qp << 10) |
>> +                    (rc[13].range_min_qp << 15) |
>> +                    (rc[14].range_min_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MAX_QP_2,
>> +                    (rc[10].range_max_qp << 0) |
>> +                    (rc[11].range_max_qp << 5) |
>> +                    (rc[12].range_max_qp << 10) |
>> +                    (rc[13].range_max_qp << 15) |
>> +                    (rc[14].range_max_qp << 20));
>> +    DPU_REG_WRITE(hw, offset + DSC_RC_RANGE_BPG_OFFSETS_2,
>> +                    (rc[10].range_bpg_offset << 0) |
>> +                    (rc[11].range_bpg_offset << 6) |
>> +                    (rc[12].range_bpg_offset << 12) |
>> +                    (rc[13].range_bpg_offset << 18) |
>> +                    (rc[14].range_bpg_offset << 24));
>> +}
>> +
>> +static inline void dpu_hw_dsc_bind_pingpong_blk_1_2(
>> +        struct dpu_hw_dsc *hw_dsc,
>> +        const enum dpu_pingpong pp)
>> +{
>> +    struct dpu_hw_blk_reg_map *hw;
>> +    int offset;
>> +    int mux_cfg = 0xf; /* Disabled */
>> +
>> +    offset = hw_dsc->caps->sblk->ctl.base;
>> +
>> +    hw = &hw_dsc->hw;
>> +    if (pp)
>> +        mux_cfg = (pp - PINGPONG_0) & 0x7;
>> +
>> +    DPU_REG_WRITE(hw, offset + DSC_CTL, mux_cfg);
>> +}
>> +
>> +static void _setup_dcs_ops_1_2(struct dpu_hw_dsc_ops *ops,
>> +        const unsigned long features)
>> +{
>> +    ops->dsc_disable = dpu_hw_dsc_disable_1_2;
>> +    ops->dsc_config = dpu_hw_dsc_config_1_2;
>> +    ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
>> +    ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
>> +}
>> +
>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>> +                   void __iomem *addr)
>> +{
>> +    struct dpu_hw_dsc *c;
>> +
>> +    c = kzalloc(sizeof(*c), GFP_KERNEL);
>> +    if (!c)
>> +        return ERR_PTR(-ENOMEM);
>> +
>> +    c->hw.blk_addr = addr + cfg->base;
>> +    c->hw.log_mask = DPU_DBG_MASK_DSC;
>> +
>> +    c->idx = cfg->id;
>> +    c->caps = cfg;
>> +    _setup_dcs_ops_1_2(&c->ops, c->caps->features);
>> +
>> +    return c;
>> +}
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> index f0fc704..502dd60 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
>> @@ -1,6 +1,7 @@
>> // SPDX-License-Identifier: GPL-2.0-only
>> /*
>>    * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>>    */
>> #define pr_fmt(fmt)    "[drm:%s] " fmt, __func__
>> @@ -246,7 +247,11 @@ int dpu_rm_init(struct dpu_rm *rm,
>>           struct dpu_hw_dsc *hw;
>>           const struct dpu_dsc_cfg *dsc = &cat->dsc[i];
>> -        hw = dpu_hw_dsc_init(dsc, mmio);
>> +        if (test_bit(DPU_DSC_HW_REV_1_2, &dsc->features))
>> +            hw = dpu_hw_dsc_init_1_2(dsc, mmio);
>> +        else
>> +            hw = dpu_hw_dsc_init(dsc, mmio);
>> +
>>           if (IS_ERR_OR_NULL(hw)) {
>>               rc = PTR_ERR(hw);
>>               DPU_ERROR("failed dsc object creation: err %d\n", rc);
>

2023-05-11 17:35:42

by Dmitry Baryshkov

[permalink] [raw]

Subject: Re: [PATCH v6 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine

On 11/05/2023 20:00, Kuogee Hsieh wrote:
>
> On 5/10/2023 9:52 PM, Dmitry Baryshkov wrote:
>> On 11/05/2023 01:07, Kuogee Hsieh wrote:
>>> Add support for DSC 1.2 by providing the necessary hooks to program
>>> the DPU DSC 1.2 encoder.
>>>
>>> Changes in v3:
>>> -- fixed kernel test rebot report that "__iomem *off" is declared but
>>> not
>>>     used at dpu_hw_dsc_config_1_2()
>>> -- unrolling thresh loops
>>>
>>> Changes in v4:
>>> -- delete DPU_DSC_HW_REV_1_1
>>> -- delete off and used real register name directly
>>>
>>> Reported-by: kernel test robot <[email protected]>
>>> Signed-off-by: Kuogee Hsieh <[email protected]>
>>> ---
>>> drivers/gpu/drm/msm/Makefile                   |   1 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 32 +-
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     | 14 +-
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 385
>>> +++++++++++++++++++++++++
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
>>> 5 files changed, 435 insertions(+), 4 deletions(-)
>>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>>
>>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>>> index b814fc8..b9af5e4 100644
>>> --- a/drivers/gpu/drm/msm/Makefile
>>> +++ b/drivers/gpu/drm/msm/Makefile
>>> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>>>       disp/dpu1/dpu_hw_catalog.o \
>>>       disp/dpu1/dpu_hw_ctl.o \
>>>       disp/dpu1/dpu_hw_dsc.o \
>>> +    disp/dpu1/dpu_hw_dsc_1_2.o \
>>>       disp/dpu1/dpu_hw_interrupts.o \
>>>       disp/dpu1/dpu_hw_intf.o \
>>>       disp/dpu1/dpu_hw_lm.o \
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> index dc0a4da..4eda2cc 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>>> @@ -1,6 +1,6 @@
>>> /* SPDX-License-Identifier: GPL-2.0-only */
>>> /*
>>> - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights
>>> reserved.
>>> + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All
>>> rights reserved.
>>>    * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights
>>> reserved.
>>>    */
>>> @@ -244,12 +244,18 @@ enum {
>>> };
>>> /**
>>> - * DSC features
>>> + * DSC sub-blocks/features
>>>    * @DPU_DSC_OUTPUT_CTRL       Configure which PINGPONG block gets
>>>    *                            the pixel output from this DSC.
>>> + * @DPU_DSC_HW_REV_1_2        DSC block supports dsc 1.1 and 1.2
>>> + * @DPU_DSC_NATIVE_422_EN     Supports native422 and native420 encoding
>>> + * @DPU_DSC_MAX
>>>    */
>>> enum {
>>>       DPU_DSC_OUTPUT_CTRL = 0x1,
>>> +    DPU_DSC_HW_REV_1_2,
>>> +    DPU_DSC_NATIVE_422_EN,
>>> +    DPU_DSC_MAX
>>> };
>>> /**
>>> @@ -306,6 +312,14 @@ struct dpu_pp_blk {
>>> };
>>> /**
>>> + * struct dpu_dsc_blk - DSC Encoder sub-blk information
>>> + * @info:   HW register and features supported by this sub-blk
>>> + */
>>> +struct dpu_dsc_blk {
>>> +    DPU_HW_SUBBLK_INFO;
>>> +};
>>> +
>>> +/**
>>>    * enum dpu_qos_lut_usage - define QoS LUT use cases
>>>    */
>>> enum dpu_qos_lut_usage {
>>> @@ -452,6 +466,17 @@ struct dpu_pingpong_sub_blks {
>>> };
>>> /**
>>> + * struct dpu_dsc_sub_blks - DSC sub-blks
>>> + * @enc: DSC encoder sub block
>>> + * @ctl: DSC controller sub block
>>> + *
>>> + */
>>> +struct dpu_dsc_sub_blks {
>>> +    struct dpu_dsc_blk enc;
>>> +    struct dpu_dsc_blk ctl;
>>> +};
>>> +
>>> +/**
>>>    * dpu_clk_ctrl_type - Defines top level clock control signals
>>>    */
>>> enum dpu_clk_ctrl_type {
>>> @@ -605,10 +630,13 @@ struct dpu_merge_3d_cfg {
>>>    * struct dpu_dsc_cfg - information of DSC blocks
>>>    * @id                 enum identifying this block
>>>    * @base               register offset of this block
>>> + * @len:               length of hardware block
>>>    * @features           bit mask identifying sub-blocks/features
>>> + * @sblk               sub-blocks information
>>>    */
>>> struct dpu_dsc_cfg {
>>>       DPU_HW_BLK_INFO;
>>> +    const struct dpu_dsc_sub_blks *sblk;
>>> };
>>> /**
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> index 138080a..bdff74d 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>>> @@ -1,5 +1,8 @@
>>> /* SPDX-License-Identifier: GPL-2.0-only */
>>> -/* Copyright (c) 2020-2022, Linaro Limited */
>>> +/*
>>> + * Copyright (c) 2020-2022, Linaro Limited
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>>> reserved
>>> + */
>>> #ifndef _DPU_HW_DSC_H
>>> #define _DPU_HW_DSC_H
>>> @@ -69,6 +72,15 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(const struct
>>> dpu_dsc_cfg *cfg,
>>>           void __iomem *addr);
>>> /**
>>> + * dpu_hw_dsc_init_1_2 - initializes the v1.2 DSC hw driver block
>>> + * @cfg: DSC catalog entry for which driver object is required
>>> + * @addr: Mapped register io address of MDP
>>> + * Returns: Error code or allocated dpu_hw_dsc context
>>> + */
>>> +struct dpu_hw_dsc *dpu_hw_dsc_init_1_2(const struct dpu_dsc_cfg *cfg,
>>> +        void __iomem *addr);
>>> +
>>> +/**
>>>    * dpu_hw_dsc_destroy - destroys dsc driver context
>>>    * @dsc:   Pointer to dsc driver context returned by dpu_hw_dsc_init
>>>    */
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>> new file mode 100644
>>> index 00000000..0c77c85
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
>>> @@ -0,0 +1,385 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>>> reserved
>>> + */
>>> +
>>> +#include <drm/display/drm_dsc_helper.h>
>>> +
>>> +#include "dpu_kms.h"
>>> +#include "dpu_hw_catalog.h"
>>> +#include "dpu_hwio.h"
>>> +#include "dpu_hw_mdss.h"
>>> +#include "dpu_hw_dsc.h"
>>> +
>>> +#define DSC_CMN_MAIN_CNF           0x00
>>> +
>>> +/* DPU_DSC_ENC register offsets */
>>> +#define ENC_DF_CTRL                0x00
>>> +#define ENC_GENERAL_STATUS         0x04
>>> +#define ENC_HSLICE_STATUS          0x08
>>> +#define ENC_OUT_STATUS             0x0C
>>> +#define ENC_INT_STAT               0x10
>>> +#define ENC_INT_CLR                0x14
>>> +#define ENC_INT_MASK               0x18
>>> +#define DSC_MAIN_CONF              0x30
>>> +#define DSC_PICTURE_SIZE           0x34
>>> +#define DSC_SLICE_SIZE             0x38
>>> +#define DSC_MISC_SIZE              0x3C
>>> +#define DSC_HRD_DELAYS             0x40
>>> +#define DSC_RC_SCALE               0x44
>>> +#define DSC_RC_SCALE_INC_DEC       0x48
>>> +#define DSC_RC_OFFSETS_1           0x4C
>>> +#define DSC_RC_OFFSETS_2           0x50
>>> +#define DSC_RC_OFFSETS_3           0x54
>>> +#define DSC_RC_OFFSETS_4           0x58
>>> +#define DSC_FLATNESS_QP            0x5C
>>> +#define DSC_RC_MODEL_SIZE          0x60
>>> +#define DSC_RC_CONFIG              0x64
>>> +#define DSC_RC_BUF_THRESH_0        0x68
>>> +#define DSC_RC_BUF_THRESH_1        0x6C
>>> +#define DSC_RC_BUF_THRESH_2        0x70
>>> +#define DSC_RC_BUF_THRESH_3        0x74
>>> +#define DSC_RC_MIN_QP_0            0x78
>>> +#define DSC_RC_MIN_QP_1            0x7C
>>> +#define DSC_RC_MIN_QP_2            0x80
>>> +#define DSC_RC_MAX_QP_0            0x84
>>> +#define DSC_RC_MAX_QP_1            0x88
>>> +#define DSC_RC_MAX_QP_2            0x8C
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
>>> +#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
>>> +
>>> +/* DPU_DSC_CTL register offsets */
>>> +#define DSC_CTL                    0x00
>>> +#define DSC_CFG                    0x04
>>> +#define DSC_DATA_IN_SWAP           0x08
>>> +#define DSC_CLK_CTRL               0x0C
>>> +
>>> +static inline int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc,
>>> int num_ss)
>>> +{
>>> +    int max_addr = 2400 / num_ss;
>>> +
>>> +    if (hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))
>>> +        max_addr /= 2;
>>> +
>>> +    return max_addr - 1;
>>> +};
>>> +
>>> +static inline void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
>>> +{
>>> +    struct dpu_hw_blk_reg_map *hw;
>>> +    u32 offset;
>>> +
>>> +    if (!hw_dsc)
>>> +        return;
>>> +
>>> +    hw = &hw_dsc->hw;
>>> +    offset = hw_dsc->caps->sblk->ctl.base;
>>> +    DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
>>> +
>>> +    offset = hw_dsc->caps->sblk->enc.base;
>>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
>>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
>>
>> This has the same problem as before. By looking at this line you can
>> not check where this write is targeted. Instead I'd suggest storing
>> sblk in the local variable and then using something like:
>>
>> DPU_REG_WRITE(hw, sblk->ctl.base + DSC_CFG, 0);
>>
>> Same applies to other functions in this patch.
>>
>>> +}
>>> +
>>> +static inline void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
>>> +                  struct drm_dsc_config *dsc,
>>> +                  u32 mode,
>>> +                  u32 initial_lines)
>>
>> Please indent to the opening brace. If using Vim, this is the "set
>> cino=(0" setting
>>
>>> +{
>>> +    struct dpu_hw_blk_reg_map *hw;
>>> +    u32 offset;
>>> +    u32 data = 0;
>>> +    u32 det_thresh_flatness;
>>> +    u32 num_active_ss_per_enc;
>>
>> s/_ss_/_slice_/g
>>
>>> +    u32 bpp;
>>> +
>>> +    if (!hw_dsc || !dsc)
>>> +        return;
>>> +
>>> +    hw = &hw_dsc->hw;
>>> +
>>> +    offset = hw_dsc->caps->sblk->enc.base;
>>> +
>>> +    if (mode & DSC_MODE_SPLIT_PANEL)
>>> +        data |= BIT(0);
>>> +
>>> +    if (mode & DSC_MODE_MULTIPLEX)
>>> +        data |= BIT(1);
>>> +
>>> +    num_active_ss_per_enc = dsc->slice_count;
>>> +    if (mode & DSC_MODE_MULTIPLEX)
>>> +        num_active_ss_per_enc = dsc->slice_count >> 1;
>>> +
>>> +    data |= (num_active_ss_per_enc & 0x3) << 7;
>>> +
>>> +    DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
>>> +
>>> +    data = (initial_lines & 0xff);
>>> +
>>> +    if (mode & DSC_MODE_VIDEO)
>>> +        data |= BIT(9);
>>> +
>>> +    data |= (_dsc_calc_ob_max_addr(hw_dsc, num_active_ss_per_enc) <<
>>> 18);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, data);
>>> +
>>> +    data = (dsc->dsc_version_minor & 0xf) << 28;
>>> +    if (dsc->dsc_version_minor == 0x2) {
>>> +        if (dsc->native_422)
>>> +            data |= BIT(22);
>>> +        if (dsc->native_420)
>>> +            data |= BIT(21);
>>> +    }
>>> +
>>> +    bpp = dsc->bits_per_pixel;
>>> +    /* as per hw requirement bpp should be programmed
>>> +     * twice the actual value in case of 420 or 422 encoding
>>> +     */
>>> +    if (dsc->native_422 || dsc->native_420)
>>> +        bpp = 2 * bpp;
>>> +    data |= (dsc->block_pred_enable ? 1 : 0) << 20;
>>> +    data |= bpp << 10;
>>> +    data |= (dsc->line_buf_depth & 0xf) << 6;
>>> +    data |= dsc->convert_rgb << 4;
>>> +    data |= dsc->bits_per_component & 0xf;
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, data);
>>> +
>>> +    data = (dsc->pic_width & 0xffff) |
>>> +        ((dsc->pic_height & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_PICTURE_SIZE, data);
>>> +
>>> +    data = (dsc->slice_width & 0xffff) |
>>> +        ((dsc->slice_height & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_SLICE_SIZE, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_MISC_SIZE,
>>> +            (dsc->slice_chunk_size) & 0xffff);
>>> +
>>> +    data = (dsc->initial_xmit_delay & 0xffff) |
>>> +        ((dsc->initial_dec_delay & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_HRD_DELAYS, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE,
>>> +            dsc->initial_scale_value & 0x3f);
>>> +
>>> +    data = (dsc->scale_increment_interval & 0xffff) |
>>> +        ((dsc->scale_decrement_interval & 0x7ff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_SCALE_INC_DEC, data);
>>> +
>>> +    data = (dsc->first_line_bpg_offset & 0x1f) |
>>> +        ((dsc->second_line_bpg_offset & 0x1f) << 5);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_1, data);
>>> +
>>> +    data = (dsc->nfl_bpg_offset & 0xffff) |
>>> +        ((dsc->slice_bpg_offset & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_2, data);
>>> +
>>> +    data = (dsc->initial_offset & 0xffff) |
>>> +        ((dsc->final_offset & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_3, data);
>>> +
>>> +    data = (dsc->nsl_bpg_offset & 0xffff) |
>>> +        ((dsc->second_line_offset_adj & 0xffff) << 16);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_OFFSETS_4, data);
>>> +
>>> +    data = (dsc->flatness_min_qp & 0x1f);
>>> +    data |= (dsc->flatness_max_qp & 0x1f) << 5;
>>> +
>>> +    det_thresh_flatness = drm_dsc_calculate_flatness_det_thresh(dsc);
>>> +    data |= (det_thresh_flatness & 0xff) << 10;
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_FLATNESS_QP, data);
>>> +
>>> +    DPU_REG_WRITE(hw, offset + DSC_RC_MODEL_SIZE,
>>> +            (dsc->rc_model_size) & 0xffff);
>>> +
>>> +    data = dsc->rc_edge_factor & 0xf;
>>> +    data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
>>> +    data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
>>> +    data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
>>> +    data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
>>
>> FIELD_PREP should become our friend. As the DPU driver does not use
>> generated headers/helpers, we should probably enforce its usage all
>> over the code.
>
> Agree, since this patch series have almost complete the review process.
>
> can we start use FIELD_PREP at next?

Yes

--
With best wishes
Dmitry