I have a dual Pentium III I use for testing. Since late last week
(around about 2.6.17-rc3) it hangs during boot just after "Setting up
standard PCI resources". 2.6.17-rc2 works fine.
A push in the right direction would be appreciated. Please reply off
list as I'm not subscribed.
...
PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=1
Setting up standard PCI resources
>>> 2.6.17-rc3 stops here and hangs.
>>> 2.6.17-rc2 continues with:
PCI: Probing PCI hardware
PCI: Discovered peer bus 01
PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 23
PCI: Cannot allocate resource region 0 of device 0000:00:0f.2
...
lspci -v:
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Flags: bus master, medium devsel, latency 32
00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
Flags: bus master, medium devsel, latency 16
00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Flags: bus master, stepping, medium devsel, latency 64
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at d800 [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <available only to root>
00:03.0 RAID bus controller: Promise Technology, Inc. PDC20267
(FastTrak100/Ultra100) (rev 02)
Subsystem: Promise Technology, Inc.: Unknown device 4d32
Flags: bus master, medium devsel, latency 64, IRQ 31
I/O ports at dfe0 [size=8]
I/O ports at dfac [size=4]
I/O ports at dfa0 [size=8]
I/O ports at dfa8 [size=4]
I/O ports at df00 [size=64]
Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at feae0000 [size=64K]
Capabilities: <available only to root>
00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
Subsystem: Broadcom OSB4 South Bridge
Flags: bus master, medium devsel, latency 0
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master
SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Flags: medium devsel
Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
01:03.0 Ethernet controller: Netgear GA630 Gigabit Ethernet (rev 01)
Subsystem: Netgear GA630 Gigabit Ethernet
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 23
Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
--
corporate: <cel at netapp dot com>
personal: <chucklever at bigfoot dot com>
On Mon, 01 May 2006 15:04:25 -0400
Chuck Lever <[email protected]> wrote:
> I have a dual Pentium III I use for testing. Since late last week
> (around about 2.6.17-rc3) it hangs during boot just after "Setting up
> standard PCI resources". 2.6.17-rc2 works fine.
Bummer
> A push in the right direction would be appreciated. Please reply off
> list as I'm not subscribed.
>
Is there any chance you can do a git-bisect to find the bad patch?
> ...
>
> PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=1
> Setting up standard PCI resources
>
> >>> 2.6.17-rc3 stops here and hangs.
> >>> 2.6.17-rc2 continues with:
>
> PCI: Probing PCI hardware
> PCI: Discovered peer bus 01
> PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
> PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 23
> PCI: Cannot allocate resource region 0 of device 0000:00:0f.2
> ...
>
> lspci -v:
>
> 00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
> Flags: bus master, medium devsel, latency 32
>
> 00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 06)
> Flags: bus master, medium devsel, latency 16
>
> 00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Rage XL
> Flags: bus master, stepping, medium devsel, latency 64
> Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> I/O ports at d800 [size=256]
> Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at feac0000 [disabled] [size=128K]
> Capabilities: <available only to root>
>
> 00:03.0 RAID bus controller: Promise Technology, Inc. PDC20267
> (FastTrak100/Ultra100) (rev 02)
> Subsystem: Promise Technology, Inc.: Unknown device 4d32
> Flags: bus master, medium devsel, latency 64, IRQ 31
> I/O ports at dfe0 [size=8]
> I/O ports at dfac [size=4]
> I/O ports at dfa0 [size=8]
> I/O ports at dfa8 [size=4]
> I/O ports at df00 [size=64]
> Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
> Expansion ROM at feae0000 [size=64K]
> Capabilities: <available only to root>
>
> 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
> Subsystem: Broadcom OSB4 South Bridge
> Flags: bus master, medium devsel, latency 0
>
> 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master
> SecP PriP])
> Flags: bus master, medium devsel, latency 64
> I/O ports at ffa0 [size=16]
>
> 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04)
> (prog-if 10 [OHCI])
> Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
> Flags: medium devsel
> Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
>
> 01:03.0 Ethernet controller: Netgear GA630 Gigabit Ethernet (rev 01)
> Subsystem: Netgear GA630 Gigabit Ethernet
> Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 23
> Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
>
> --
> corporate: <cel at netapp dot com>
> personal: <chucklever at bigfoot dot com>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Andrew Morton wrote:
> On Mon, 01 May 2006 15:04:25 -0400
> Chuck Lever <[email protected]> wrote:
>
>> I have a dual Pentium III I use for testing. Since late last week
>> (around about 2.6.17-rc3) it hangs during boot just after "Setting up
>> standard PCI resources". 2.6.17-rc2 works fine.
>
> Bummer
Strange (but different) behavior also seen on a PE2650.
>> A push in the right direction would be appreciated. Please reply off
>> list as I'm not subscribed.
>>
>
> Is there any chance you can do a git-bisect to find the bad patch?
Done. The bad patch was Badari's first vectored I/O patch. Removing
the patch fixes the badness on both systems. I reported this to Badari
late yesterday afternoon.
He hasn't seen this behavior in his test environment, which is only
ppc64 and amd64.
--
corporate: <cel at netapp dot com>
personal: <chucklever at bigfoot dot com>
In article <[email protected]> you wrote:
> Newsgroups: gmane.linux.kernel
> I have a dual Pentium III I use for testing. Since late last week
> (around about 2.6.17-rc3) it hangs during boot just after "Setting up
> standard PCI resources". 2.6.17-rc2 works fine.
Same situation, random hung when apply quirk_usb_early_handoff.
Intel SCB2 board, dual PIII, 2Gb memory.
> A push in the right direction would be appreciated. Please reply off
> list as I'm not subscribed.
Try compile USB stuff as modules or without it.
For me 2.6.16.9 kernel with CONFIG_USB=m works.
> ...
> PCI: PCI BIOS revision 2.10 entry at 0xfdbc1, last bus=1
> Setting up standard PCI resources
> >>> 2.6.17-rc3 stops here and hangs.
> >>> 2.6.17-rc2 continues with:
> PCI: Probing PCI hardware
> PCI: Discovered peer bus 01
> PCI: Using IRQ router ServerWorks [1166/0200] at 0000:00:0f.0
> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
> PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 23
> PCI: Cannot allocate resource region 0 of device 0000:00:0f.2
> ...
> lspci -v:
[skipp]
> 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04)
> (prog-if 10 [OHCI])
> Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
> Flags: medium devsel
> Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
0000:00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: Intel Corporation: Unknown device 340f
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at fea40000 (32-bit, non-prefetchable) [size=4K]
00: 66 11 20 02 17 00 80 02 05 10 03 0c 08 40 00 00
10: 00 00 a4 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 0f 34
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 50