The dt-bindings for the GSWIP describe that the node should be named
"switch". Use the same name in sysctrl.c so the GSWIP driver can
actually find the "gphy0" and "gphy1" clocks.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: [email protected]
Signed-off-by: Martin Blumenstingl <[email protected]>
---
arch/mips/lantiq/xway/sysctrl.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index aa37545ebe8f..b10342018d19 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -514,8 +514,8 @@ void __init ltq_soc_init(void)
clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
PMU_PPE_DP | PMU_PPE_TC);
clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+ clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+ clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
@@ -538,8 +538,8 @@ void __init ltq_soc_init(void)
PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
PMU_PPE_QSB | PMU_PPE_TOP);
- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+ clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+ clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
--
2.27.0
On 6/7/20 3:10 PM, Martin Blumenstingl wrote:
> The dt-bindings for the GSWIP describe that the node should be named
> "switch". Use the same name in sysctrl.c so the GSWIP driver can
> actually find the "gphy0" and "gphy1" clocks.
>
> Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
> Cc: [email protected]
> Signed-off-by: Martin Blumenstingl <[email protected]>
Acked-by: Hauke Mehrtens <[email protected]>
> ---
> arch/mips/lantiq/xway/sysctrl.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
> index aa37545ebe8f..b10342018d19 100644
> --- a/arch/mips/lantiq/xway/sysctrl.c
> +++ b/arch/mips/lantiq/xway/sysctrl.c
> @@ -514,8 +514,8 @@ void __init ltq_soc_init(void)
> clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
> PMU_PPE_DP | PMU_PPE_TC);
> clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
> - clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
> - clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
> + clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
> + clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
> clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
> clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
> clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
> @@ -538,8 +538,8 @@ void __init ltq_soc_init(void)
> PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
> PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
> PMU_PPE_QSB | PMU_PPE_TOP);
> - clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
> - clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
> + clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
> + clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
> clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
> clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
> clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
>
On Sun, Jun 07, 2020 at 03:10:23PM +0200, Martin Blumenstingl wrote:
> The dt-bindings for the GSWIP describe that the node should be named
> "switch". Use the same name in sysctrl.c so the GSWIP driver can
> actually find the "gphy0" and "gphy1" clocks.
>
> Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
> Cc: [email protected]
> Signed-off-by: Martin Blumenstingl <[email protected]>
> ---
> arch/mips/lantiq/xway/sysctrl.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
applied to mips-fixes.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]