kernel: Linux version 2.6.23-rc5 (pmarques@pmarqueslinux) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 SMP PREEMPT Mon Sep 3 15:49:59 WEST 2007
kernel: BIOS-provided physical RAM map:
kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
kernel: BIOS-e820: 0000000000100000 - 000000004ff30000 (usable)
kernel: BIOS-e820: 000000004ff30000 - 000000004ff40000 (ACPI data)
kernel: BIOS-e820: 000000004ff40000 - 000000004fff0000 (ACPI NVS)
kernel: BIOS-e820: 000000004fff0000 - 0000000050000000 (reserved)
kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
kernel: 1279MB LOWMEM available.
kernel: found SMP MP-table at 000ff780
kernel: Zone PFN ranges:
kernel: DMA 0 -> 4096
kernel: Normal 4096 -> 327472
kernel: Movable zone start PFN for each node
kernel: early_node_map[1] active PFN ranges
kernel: 0: 0 -> 327472
kernel: DMI 2.3 present.
kernel: ACPI: RSDP 000F9EA0, 0021 (r2 ACPIAM)
kernel: ACPI: XSDT 4FF30100, 003C (r1 A M I OEMXSDT 8000305 MSFT 97)
kernel: ACPI: FACP 4FF30290, 00F4 (r3 A M I OEMFACP 8000305 MSFT 97)
kernel: ACPI: DSDT 4FF303F0, 37F1 (r1 P4P8S P4P8S007 7 INTL 2002026)
kernel: ACPI: FACS 4FF40000, 0040
kernel: ACPI: APIC 4FF30390, 005C (r1 A M I OEMAPIC 8000305 MSFT 97)
kernel: ACPI: OEMB 4FF40040, 003F (r1 A M I OEMBIOS 8000305 MSFT 97)
kernel: ACPI: PM-Timer IO Port: 0x808
kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
kernel: Processor #0 15:2 APIC version 20
kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
kernel: Processor #1 15:2 APIC version 20
kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
kernel: Using ACPI (MADT) for SMP configuration information
kernel: Allocating PCI resources starting at 60000000 (gap: 50000000:afb80000)
kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
kernel: swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
kernel: Built 1 zonelists in Zone order. Total pages: 324914
kernel: Kernel command line: BOOT_IMAGE=2623rc5 ro root=303 devfs=mount
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Initializing CPU#0
kernel: CPU 0 irqstacks, hard=805c7000 soft=805c5000
kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
kernel: Detected 2798.707 MHz processor.
kernel: Console: colour dummy device 80x25
kernel: console [tty0] enabled
kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
kernel: Memory: 1292116k/1309888k available (3449k kernel code, 17200k reserved, 1172k data, 228k init, 0k highmem)
kernel: virtual kernel memory layout:
kernel: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
kernel: vmalloc : 0xd0800000 - 0xfffb3000 ( 759 MB)
kernel: lowmem : 0x80000000 - 0xcff30000 (1279 MB)
kernel: .init : 0x80589000 - 0x805c2000 ( 228 kB)
kernel: .data : 0x8045e4fb - 0x80583794 (1172 kB)
kernel: .text : 0x80100000 - 0x8045e4fb (3449 kB)
kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
kernel: Calibrating delay using timer specific routine.. 5599.80 BogoMIPS (lpj=2799904)
kernel: Mount-cache hash table entries: 512
kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
kernel: CPU: L2 cache: 512K
kernel: CPU: Physical Processor ID: 0
kernel: Intel machine check architecture supported.
kernel: Intel machine check reporting enabled on CPU#0.
kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
kernel: CPU0: Thermal monitoring enabled
kernel: Compat vDSO mapped to ffffe000.
kernel: Checking 'hlt' instruction... OK.
kernel: SMP alternatives: switching to UP code
kernel: ACPI: Core revision 20070126
kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 1/1 eip 3000
kernel: CPU 1 irqstacks, hard=805c8000 soft=805c6000
kernel: Initializing CPU#1
kernel: Calibrating delay using timer specific routine.. 5596.55 BogoMIPS (lpj=2798279)
kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
kernel: CPU: L2 cache: 512K
kernel: CPU: Physical Processor ID: 0
kernel: Intel machine check architecture supported.
kernel: Intel machine check reporting enabled on CPU#1.
kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
kernel: CPU1: Thermal monitoring enabled
kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
kernel: Total of 2 processors activated (11196.36 BogoMIPS).
kernel: ENABLING IO-APIC IRQs
kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
kernel: Brought up 2 CPUs
kernel: NET: Registered protocol family 16
kernel: ACPI: bus type pci registered
kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
kernel: PCI: Using configuration type 1
kernel: Setting up standard PCI resources
kernel: ACPI: Interpreter enabled
kernel: ACPI: (supports S0 S1 S3)
kernel: ACPI: Using IOAPIC for interrupt routing
kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
kernel: PCI quirk: region 0480-04bf claimed by ICH4 GPIO
kernel: PCI: Transparent bridge - 0000:00:1e.0
kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0B, should be FE [20070126]
kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
kernel: pnp: PnP ACPI init
kernel: ACPI: bus type pnp registered
kernel: pnp: PnP ACPI: found 14 devices
kernel: ACPI: ACPI bus type pnp unregistered
kernel: SCSI subsystem initialized
kernel: PCI: Using ACPI for IRQ routing
kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
kernel: Time: tsc clocksource has been installed.
kernel: pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
kernel: pnp: 00:0a: ioport range 0x290-0x297 has been reserved
kernel: pnp: 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
kernel: pnp: 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
kernel: pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
kernel: pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
kernel: pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
kernel: pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
kernel: pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
kernel: pnp: 00:0d: iomem range 0x100000-0x4ffeffff could not be reserved
kernel: PCI: Bridge: 0000:00:01.0
kernel: IO window: c000-cfff
kernel: MEM window: fe900000-fe9fffff
kernel: PREFETCH window: d7f00000-f7efffff
kernel: PCI: Bridge: 0000:00:1e.0
kernel: IO window: d000-dfff
kernel: MEM window: fea00000-feafffff
kernel: PREFETCH window: disabled.
kernel: NET: Registered protocol family 2
kernel: IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
kernel: TCP: Hash tables configured (established 262144 bind 65536)
kernel: TCP reno registered
kernel: Machine check exception polling timer started.
kernel: IA-32 Microcode Update Driver: v1.14a <[email protected]>
kernel: Total HugeTLB memory allocated, 0
kernel: fuse init (API version 7.8)
kernel: JFS: nTxBlock = 8192, nTxLock = 65536
kernel: SGI XFS with no debug enabled
kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
kernel: io scheduler noop registered
kernel: io scheduler anticipatory registered (default)
kernel: io scheduler deadline registered
kernel: io scheduler cfq registered
kernel: vesafb: framebuffer at 0xe8000000, mapped to 0xd0d00000, using 1875k, total 131072k
kernel: vesafb: mode is 800x600x16, linelength=1600, pages=135
kernel: vesafb: protected mode interface info at c000:54b5
kernel: vesafb: pmi: set display start = 800c5549, set palette = 800c5595
kernel: vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
kernel: vesafb: scrolling: redraw
kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
kernel: Console: switching to colour frame buffer device 100x37
kernel: fb0: VESA VGA frame buffer device
kernel: input: Power Button (FF) as /devices/virtual/input/input0
kernel: ACPI: Power Button (FF) [PWRF]
kernel: input: Power Button (CM) as /devices/virtual/input/input1
kernel: ACPI: Power Button (CM) [PWRB]
kernel: lp: driver loaded but no devices found
kernel: Real Time Clock Driver v1.12ac
kernel: Non-volatile memory driver v1.2
kernel: ppdev: user-space parallel port driver
kernel: Linux agpgart interface v0.102
kernel: agpgart: Detected an Intel 865 Chipset.
kernel: agpgart: AGP aperture is 64M @ 0xf8000000
kernel: [drm] Initialized drm 1.1.0 20060810
kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
kernel: [drm] Initialized radeon 1.28.0 20060524 on minor 0
kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: parport_pc 00:09: reported by Plug and Play ACPI
kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
kernel: lp0: using parport0 (interrupt-driven).
kernel: Floppy drive(s): fd0 is 1.44M
kernel: FDC 0 is a post-1991 82077
kernel: loop: module loaded
kernel: nbd: registered device at major 43
kernel: 8139too Fast Ethernet driver 0.9.28
kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17
kernel: eth0: RealTek RTL8139 at 0xd0cfcc00, 00:0c:6e:b5:15:91, IRQ 17
kernel: tun: Universal TUN/TAP device driver, 1.6
kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
kernel: netconsole: not configured, aborting
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
kernel: ICH5: chipset revision 2
kernel: ICH5: not 100%% native mode: will probe irqs later
kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
kernel: hda: IC35L120AVV207-1, ATA DISK drive
kernel: Switched to high resolution mode on CPU 1
kernel: Switched to high resolution mode on CPU 0
kernel: hdb: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
kernel: hdc: QUANTUM FIREBALLP LM20.5, ATA DISK drive
kernel: ide1 at 0x170-0x177,0x376 on irq 15
kernel: hda: max request size: 512KiB
kernel: hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
kernel: hda: cache flushes supported
kernel: hda: hda1 hda2 hda3
kernel: hdc: max request size: 128KiB
kernel: hdc: 40132503 sectors (20547 MB) w/1900KiB Cache, CHS=39813/16/63, UDMA(66)
kernel: hdc: cache flushes not supported
kernel: hdc: hdc1
kernel: hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
kernel: Uniform CD-ROM driver Revision: 3.20
kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
kernel: mice: PS/2 mouse device common for all mice
kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
kernel: Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19
kernel: AC'97 0 analog subsections not ready
kernel: intel8x0_measure_ac97_clock: measured 50534 usecs
kernel: intel8x0: clocking to 48000
kernel: ALSA device list:
kernel: #0: Intel ICH5 with AD1888 at irq 19
kernel: IPv4 over IPv4 tunneling driver
kernel: TCP cubic registered
kernel: NET: Registered protocol family 1
kernel: NET: Registered protocol family 17
kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
kernel: Using IPI No-Shortcut mode
kernel: BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: VFS: Mounted root (ext3 filesystem) readonly.
kernel: Freeing unused kernel memory: 228k freed
kernel: Write protecting the kernel read-only data: 951k
kernel: usbcore: registered new interface driver usbfs
kernel: usbcore: registered new interface driver hub
kernel: usbcore: registered new device driver usb
kernel: USB Universal Host Controller Interface driver v3.0
kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0
kernel: usb usb1: configuration #1 chosen from 1 choice
kernel: hub 1-0:1.0: USB hub found
kernel: hub 1-0:1.0: 2 ports detected
kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
kernel: uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ef00
kernel: usb usb2: configuration #1 chosen from 1 choice
kernel: hub 2-0:1.0: USB hub found
kernel: hub 2-0:1.0: 2 ports detected
kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20
kernel: usb usb3: configuration #1 chosen from 1 choice
kernel: hub 3-0:1.0: USB hub found
kernel: hub 3-0:1.0: 2 ports detected
kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40
kernel: usb usb4: configuration #1 chosen from 1 choice
kernel: hub 4-0:1.0: USB hub found
kernel: hub 4-0:1.0: 2 ports detected
kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
kernel: ehci_hcd 0000:00:1d.7: debug port 1
kernel: ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebff800
kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
kernel: usb usb5: configuration #1 chosen from 1 choice
kernel: hub 5-0:1.0: USB hub found
kernel: hub 5-0:1.0: 8 ports detected
kernel: EXT3 FS on hda3, internal journal
kernel: Adding 811240k swap on /dev/hda1. Priority:-1 extents:1 across:811240k
kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
kernel: [drm] Setting GART location based on old memory map
kernel: [drm] Loading R200 Microcode
kernel: [drm] writeback test succeeded in 1 usecs
kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
kernel: smbfs: Unrecognized mount option noauto
kernel: klogd 1.4.1, log source = /proc/kmsg started.
kernel: Inspecting /boot/System.map-2.6.21
kernel: Loaded 32022 symbols from /boot/System.map-2.6.21.
kernel: Symbols match kernel version 2.6.21.
kernel: No module symbols loaded - kernel modules not enabled.
Paulo Marques schrieb:
> I just tried booting a brand new 2.6.23-rc5 and after a few minutes it
> just panicked: machine totally frozen, blinking keyboard leds.
[...]
> Maybe someone out there has a good suggestion that I could try before
> bisecting...
A probable candidate would be:
http://lkml.org/lkml/2007/9/2/219
HTH
T.
--
Tilman Schmidt E-Mail: [email protected]
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Unge?ffnet mindestens haltbar bis: (siehe R?ckseite)
Tilman Schmidt wrote:
> Paulo Marques schrieb:
>> I just tried booting a brand new 2.6.23-rc5 and after a few minutes it
>> just panicked: machine totally frozen, blinking keyboard leds.
> [...]
>> Maybe someone out there has a good suggestion that I could try before
>> bisecting...
>
> A probable candidate would be:
>
> http://lkml.org/lkml/2007/9/2/219
I've been running with that patch applied for a few hours now and
everything seems to be working fine. Without the patch the kernel would
hang in a few minutes, so I guess this fixed it.
Thanks for the help,
--
Paulo Marques - http://www.grupopie.com
"The Computer made me do it."