2002-08-22 23:45:43

by Hanna Linder

[permalink] [raw]
Subject: Re: PCI Cleanup


One more file in sh arch ported to the new pci_ops changes.
This will apply agains bk://linuxusb.bkbits.net/pci_hp-2.5
(roughly 2.5.31).

Hanna

-----
diff -Nru a/arch/sh/kernel/pci-sh7751.c b/arch/sh/kernel/pci-sh7751.c
--- a/arch/sh/kernel/pci-sh7751.c Thu Aug 22 16:49:52 2002
+++ b/arch/sh/kernel/pci-sh7751.c Thu Aug 22 16:49:52 2002
@@ -41,14 +41,14 @@
#ifdef CONFIG_PCI_DIRECT


-#define CONFIG_CMD(dev, where) (0x80000000 | (dev->bus->number << 16) | (dev->devfn << 8) | (where & ~3))
+#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))

#define PCI_REG(reg) (SH7751_PCIREG_BASE+reg)

/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
-static int pci_conf1_read_config_byte(struct pci_dev *dev, int where, u8 *value)
+static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
{
u32 word;
unsigned long flags;
@@ -57,144 +57,88 @@
* so we must do byte alignment by hand
*/
save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
+ outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
word = inl(PCI_REG(SH7751_PCIPDR));
restore_flags(flags);
- switch (where & 0x3) {
- case 3:
- *value = (u8)(word >> 24);
- break;
- case 2:
- *value = (u8)(word >> 16);
- break;
- case 1:
- *value = (u8)(word >> 8);
- break;
- default:
- *value = (u8)word;
- break;
- }
- PCIDBG(4,"pci_conf1_read_config_byte@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),*value);
- return PCIBIOS_SUCCESSFUL;
-}

-static int pci_conf1_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
- u32 word;
- unsigned long flags;
-
- /* PCIPDR may only be accessed as 32 bit words,
- * so we must do word alignment by hand
- */
- save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
- word = inl(PCI_REG(SH7751_PCIPDR));
- restore_flags(flags);
- switch (where & 0x3) {
- case 3:
- // This should never happen...
- printk(KERN_ERR "PCI BIOS: read_config_word: Illegal u16 alignment");
- return PCIBIOS_BAD_REGISTER_NUMBER;
- case 2:
- *value = (u16)(word >> 16);
- break;
+ switch (size) {
case 1:
- *value = (u16)(word >> 8);
- break;
- default:
- *value = (u16)word;
+ switch (where & 0x3) {
+ case 3:
+ *value = (u8)(word >> 24);
+ break;
+ case 2:
+ *value = (u8)(word >> 16);
+ break;
+ case 1:
+ *value = (u8)(word >> 8);
+ break;
+ default:
+ *value = (u8)word;
+ break;
+ }
+ case 2:
+ switch (where & 0x3) {
+ case 3: /*This should never happen.*/
+ printk(KERN_ERR "PCI BIOS: read_config: Illegal u16 alignment");
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ case 2:
+ *value = (u16)(word >> 16);
+ break;
+ case 1:
+ *value = (u16)(word >> 8);
+ break;
+ default:
+ *value = (u16)word;
+ break;
+ }
+ case 4:
+ *value = word;
break;
- }
- PCIDBG(4,"pci_conf1_read_config_word@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),*value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
- unsigned long flags;
-
- save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
- *value = inl(PCI_REG(SH7751_PCIPDR));
- restore_flags(flags);
- PCIDBG(4,"pci_conf1_read_config_dword@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),*value);
+ }
+ PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
return PCIBIOS_SUCCESSFUL;
}

-static int pci_conf1_write_config_byte(struct pci_dev *dev, int where, u8 value)
+/*
+ * Since SH7751 only does 32bit access we'll have to do a read,mask,write operation.
+ * We'll allow an odd byte offset, though it should be illegal.
+ */
+static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
{
- u32 word;
- u32 shift = (where & 3) * 8;
- u32 mask = ((1 << 8) - 1) << shift; // create the byte mask
+ u32 word,mask;
unsigned long flags;
-
- /* Since SH7751 only does 32bit access we'll have to do a
- * read,mask,write operation
- */
- save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
- word = inl(PCI_REG(SH7751_PCIPDR)) ;
- word &= ~mask;
- word |= value << shift;
-
- outl(word, PCI_REG(SH7751_PCIPDR));
- restore_flags(flags);
- PCIDBG(4,"pci_conf1_write_config_byte@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),word);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
- u32 word;
u32 shift = (where & 3) * 8;
- u32 mask = ((1 << 16) - 1) << shift; // create the word mask
- unsigned long flags;

- /* Since SH7751 only does 32bit access we'll have to do a
- * read,mask,write operation. We'll allow an odd byte offset,
- * though it should be illegal.
- */
- if (shift == 24)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
+ if(size == 1) {
+ mask = ((1 << 8) - 1) << shift; // create the byte mask
+ } else if(size == 2){
+ if(shift == 24)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ mask = ((1 << 16) - 1) << shift; // create the word mask
+ }
+ save_and_cli(flags);
+ outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
+ if(size == 4){
+ outl(value, PCI_REG(SH7751_PCIPDR));
+ restore_flags(flags);
+ PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
+ return PCIBIOS_SUCCESSFUL;
+ }
word = inl(PCI_REG(SH7751_PCIPDR)) ;
word &= ~mask;
word |= value << shift;
-
- outl(value, PCI_REG(SH7751_PCIPDR));
- restore_flags(flags);
- PCIDBG(4,"pci_conf1_write_config_word@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),word);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
- unsigned long flags;
-
- save_and_cli(flags);
- outl(CONFIG_CMD(dev,where), PCI_REG(SH7751_PCIPAR));
- outl(value, PCI_REG(SH7751_PCIPDR));
+ outl(word, PCI_REG(SH7751_PCIPDR));
restore_flags(flags);
- PCIDBG(4,"pci_conf1_write_config_dword@0x%08x=0x%x\n",
- CONFIG_CMD(dev,where),value);
+ PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
return PCIBIOS_SUCCESSFUL;
}

#undef CONFIG_CMD

static struct pci_ops pci_direct_conf1 = {
- pci_conf1_read_config_byte,
- pci_conf1_read_config_word,
- pci_conf1_read_config_dword,
- pci_conf1_write_config_byte,
- pci_conf1_write_config_word,
- pci_conf1_write_config_dword
+ .read = pci_conf1_read,
+ .write = pci_conf1_write,
};

struct pci_ops * __init pci_check_direct(void)