From: Baolin Wang <[email protected]>
Add the Spreadtrum mailbox documentation.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes from v2:
- Add reviewed tag from Rob.
- Remove redundant 'minItems'.
Changes from v1:
- Add 'additionalProperties'.
- Split description for each entry.
---
.../devicetree/bindings/mailbox/sprd-mailbox.yaml | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
new file mode 100644
index 0000000..0f7451b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum mailbox controller bindings
+
+maintainers:
+ - Orson Zhai <[email protected]>
+ - Baolin Wang <[email protected]>
+ - Chunyan Zhang <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc9860-mailbox
+
+ reg:
+ items:
+ - description: inbox registers' base address
+ - description: outbox registers' base address
+
+ interrupts:
+ items:
+ - description: inbox interrupt
+ - description: outbox interrupt
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: enable
+
+ "#mbox-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mailbox: mailbox@400a0000 {
+ compatible = "sprd,sc9860-mailbox";
+ reg = <0 0x400a0000 0 0x8000>, <0 0x400a8000 0 0x8000>;
+ #mbox-cells = <1>;
+ clock-names = "enable";
+ clocks = <&aon_gate 53>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
--
1.9.1
From: Baolin Wang <[email protected]>
The Spreadtrum mailbox controller supports 8 channels to communicate
with MCUs, and it contains 2 different parts: inbox and outbox, which
are used to send and receive messages by IRQ mode.
Signed-off-by: Baolin Wang <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes from v2:
- None.
Changes from v1:
- None
---
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/sprd-mailbox.c | 350 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 360 insertions(+)
create mode 100644 drivers/mailbox/sprd-mailbox.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ab4eb75..a33eaab 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -227,4 +227,12 @@ config ZYNQMP_IPI_MBOX
message to the IPI buffer and will access the IPI control
registers to kick the other processor or enquire status.
+config SPRD_MBOX
+ tristate "Spreadtrum Mailbox"
+ depends on ARCH_SPRD || COMPILE_TEST
+ help
+ Mailbox driver implementation for the Spreadtrum platform. It is used
+ to send message between application processors and MCU. Say Y here if
+ you want to build the Spreatrum mailbox controller driver.
+
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index c22fad6..0f47b6b 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -48,3 +48,5 @@ obj-$(CONFIG_STM32_IPCC) += stm32-ipcc.o
obj-$(CONFIG_MTK_CMDQ_MBOX) += mtk-cmdq-mailbox.o
obj-$(CONFIG_ZYNQMP_IPI_MBOX) += zynqmp-ipi-mailbox.o
+
+obj-$(CONFIG_SPRD_MBOX) += sprd-mailbox.o
diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c
new file mode 100644
index 0000000..58e5388
--- /dev/null
+++ b/drivers/mailbox/sprd-mailbox.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Spreadtrum mailbox driver
+ *
+ * Copyright (c) 2020 Spreadtrum Communications Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define SPRD_MBOX_ID 0x0
+#define SPRD_MBOX_MSG_LOW 0x4
+#define SPRD_MBOX_MSG_HIGH 0x8
+#define SPRD_MBOX_TRIGGER 0xc
+#define SPRD_MBOX_FIFO_RST 0x10
+#define SPRD_MBOX_FIFO_STS 0x14
+#define SPRD_MBOX_IRQ_STS 0x18
+#define SPRD_MBOX_IRQ_MSK 0x1c
+#define SPRD_MBOX_LOCK 0x20
+#define SPRD_MBOX_FIFO_DEPTH 0x24
+
+/* Bit and mask definiation for inbox's SPRD_MBOX_FIFO_STS register */
+#define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16)
+#define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8)
+#define SPRD_INBOX_FIFO_DELIVER_SHIFT 16
+#define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0)
+
+/* Bit and mask definiation for SPRD_MBOX_IRQ_STS register */
+#define SPRD_MBOX_IRQ_CLR BIT(0)
+
+/* Bit and mask definiation for outbox's SPRD_MBOX_FIFO_STS register */
+#define SPRD_OUTBOX_FIFO_FULL BIT(0)
+#define SPRD_OUTBOX_FIFO_WR_SHIFT 16
+#define SPRD_OUTBOX_FIFO_RD_SHIFT 24
+#define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0)
+
+/* Bit and mask definiation for inbox's SPRD_MBOX_IRQ_MSK register */
+#define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0)
+#define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1)
+#define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2)
+#define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0)
+
+/* Bit and mask definiation for outbox's SPRD_MBOX_IRQ_MSK register */
+#define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0)
+#define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0)
+
+#define SPRD_MBOX_CHAN_MAX 8
+
+struct sprd_mbox_chan {
+ u8 id;
+ struct mbox_chan *chan;
+};
+
+struct sprd_mbox_priv {
+ struct mbox_controller mbox;
+ struct device *dev;
+ void __iomem *inbox_base;
+ void __iomem *outbox_base;
+ struct clk *clk;
+ u32 outbox_fifo_depth;
+
+ struct sprd_mbox_chan mchan[SPRD_MBOX_CHAN_MAX];
+ struct mbox_chan chan[SPRD_MBOX_CHAN_MAX];
+};
+
+static struct sprd_mbox_priv *to_sprd_mbox_priv(struct mbox_controller *mbox)
+{
+ return container_of(mbox, struct sprd_mbox_priv, mbox);
+}
+
+static u32 sprd_mbox_get_fifo_len(struct sprd_mbox_priv *priv, u32 fifo_sts)
+{
+ u32 wr_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_WR_SHIFT) &
+ SPRD_OUTBOX_FIFO_POS_MASK;
+ u32 rd_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_RD_SHIFT) &
+ SPRD_OUTBOX_FIFO_POS_MASK;
+ u32 fifo_len;
+
+ /*
+ * If the read pointer is equal with write pointer, which means the fifo
+ * is full or empty.
+ */
+ if (wr_pos == rd_pos) {
+ if (fifo_sts & SPRD_OUTBOX_FIFO_FULL)
+ fifo_len = priv->outbox_fifo_depth;
+ else
+ fifo_len = 0;
+ } else if (wr_pos > rd_pos) {
+ fifo_len = wr_pos - rd_pos;
+ } else {
+ fifo_len = priv->outbox_fifo_depth - rd_pos + wr_pos;
+ }
+
+ return fifo_len;
+}
+
+static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data)
+{
+ struct sprd_mbox_priv *priv = data;
+ struct sprd_mbox_chan *mchan;
+ u32 fifo_sts, fifo_len, msg[2];
+ int i, id;
+
+ fifo_sts = readl(priv->outbox_base + SPRD_MBOX_FIFO_STS);
+
+ fifo_len = sprd_mbox_get_fifo_len(priv, fifo_sts);
+ if (!fifo_len) {
+ dev_warn_ratelimited(priv->dev, "spurious outbox interrupt\n");
+ return IRQ_NONE;
+ }
+
+ for (i = 0; i < fifo_len; i++) {
+ msg[0] = readl(priv->outbox_base + SPRD_MBOX_MSG_LOW);
+ msg[1] = readl(priv->outbox_base + SPRD_MBOX_MSG_HIGH);
+ id = readl(priv->outbox_base + SPRD_MBOX_ID);
+
+ mchan = &priv->mchan[id];
+ mbox_chan_received_data(mchan->chan, (void *)msg);
+
+ /* Trigger to update outbox FIFO pointer */
+ writel(0x1, priv->outbox_base + SPRD_MBOX_TRIGGER);
+ }
+
+ /* Clear irq status after reading all message. */
+ writel(SPRD_MBOX_IRQ_CLR, priv->outbox_base + SPRD_MBOX_IRQ_STS);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data)
+{
+ struct sprd_mbox_priv *priv = data;
+ struct sprd_mbox_chan *mchan;
+ u32 fifo_sts, send_sts, id;
+
+ fifo_sts = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS);
+
+ /* Get the inbox data delivery status */
+ send_sts = (fifo_sts & SPRD_INBOX_FIFO_DELIVER_MASK) >>
+ SPRD_INBOX_FIFO_DELIVER_SHIFT;
+ if (!send_sts) {
+ dev_warn_ratelimited(priv->dev, "spurious inbox interrupt\n");
+ return IRQ_NONE;
+ }
+
+ while (send_sts) {
+ id = __ffs(send_sts);
+ send_sts &= (send_sts - 1);
+
+ mchan = &priv->mchan[id];
+ mbox_chan_txdone(mchan->chan, 0);
+ }
+
+ /* Clear FIFO delivery and overflow status */
+ writel(fifo_sts &
+ (SPRD_INBOX_FIFO_DELIVER_MASK | SPRD_INBOX_FIFO_OVERLOW_MASK),
+ priv->inbox_base + SPRD_MBOX_FIFO_RST);
+
+ /* Clear irq status */
+ writel(SPRD_MBOX_IRQ_CLR, priv->inbox_base + SPRD_MBOX_IRQ_STS);
+
+ return IRQ_HANDLED;
+}
+
+static int sprd_mbox_send_data(struct mbox_chan *chan, void *msg)
+{
+ struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
+ struct sprd_mbox_chan *mchan = chan->con_priv;
+ u32 *data = msg, busy;
+
+ /*
+ * Check if current channel is busy or not, and we can not send data
+ * if current channel is busy.
+ */
+ busy = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS) &
+ SPRD_INBOX_FIFO_BUSY_MASK;
+ if (busy & BIT(mchan->id)) {
+ dev_err(priv->dev, "Channel %d is busy\n", mchan->id);
+ return -EBUSY;
+ }
+
+ /* Write data into inbox FIFO, and only support 8 bytes every time */
+ writel(data[0], priv->inbox_base + SPRD_MBOX_MSG_LOW);
+ writel(data[1], priv->inbox_base + SPRD_MBOX_MSG_HIGH);
+
+ /* Set target core id */
+ writel(mchan->id, priv->inbox_base + SPRD_MBOX_ID);
+
+ /* Trigger remote request */
+ writel(0x1, priv->inbox_base + SPRD_MBOX_TRIGGER);
+
+ return 0;
+}
+
+static int sprd_mbox_startup(struct mbox_chan *chan)
+{
+ struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
+ u32 val;
+
+ /* Select outbox FIFO mode and reset the outbox FIFO status */
+ writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST);
+
+ /* Enable inbox FIFO overflow and delivery interrupt */
+ val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+ val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ);
+ writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+
+ /* Enable outbox FIFO not empty interrupt */
+ val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ;
+ writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+
+ return 0;
+}
+
+static void sprd_mbox_shutdown(struct mbox_chan *chan)
+{
+ struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
+
+ /* Disable inbox & outbox interrupt */
+ writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+ writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+}
+
+static const struct mbox_chan_ops sprd_mbox_ops = {
+ .send_data = sprd_mbox_send_data,
+ .startup = sprd_mbox_startup,
+ .shutdown = sprd_mbox_shutdown,
+};
+
+static void sprd_mbox_disable(void *data)
+{
+ struct sprd_mbox_priv *priv = data;
+
+ clk_disable_unprepare(priv->clk);
+}
+
+static int sprd_mbox_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sprd_mbox_priv *priv;
+ int i, ret, inbox_irq, outbox_irq;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ /*
+ * The Spreadtrum mailbox uses an inbox to send messages to the target
+ * core, and uses an outbox to receive messages from other cores.
+ *
+ * Thus the mailbox controller supplies 2 different register addresses
+ * and IRQ numbers for inbox and outbox.
+ */
+ priv->inbox_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->inbox_base))
+ return PTR_ERR(priv->inbox_base);
+
+ priv->outbox_base = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(priv->outbox_base))
+ return PTR_ERR(priv->outbox_base);
+
+ priv->clk = devm_clk_get(dev, "enable");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get mailbox clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, sprd_mbox_disable, priv);
+ if (ret) {
+ dev_err(dev, "failed to add mailbox disable action\n");
+ return ret;
+ }
+
+ inbox_irq = platform_get_irq(pdev, 0);
+ if (inbox_irq < 0)
+ return inbox_irq;
+
+ ret = devm_request_irq(dev, inbox_irq, sprd_mbox_inbox_isr,
+ IRQF_NO_SUSPEND, dev_name(dev), priv);
+ if (ret) {
+ dev_err(dev, "failed to request inbox IRQ: %d\n", ret);
+ return ret;
+ }
+
+ outbox_irq = platform_get_irq(pdev, 1);
+ if (outbox_irq < 0)
+ return outbox_irq;
+
+ ret = devm_request_irq(dev, outbox_irq, sprd_mbox_outbox_isr,
+ IRQF_NO_SUSPEND, dev_name(dev), priv);
+ if (ret) {
+ dev_err(dev, "failed to request outbox IRQ: %d\n", ret);
+ return ret;
+ }
+
+ /* Get the default outbox FIFO depth */
+ priv->outbox_fifo_depth =
+ readl(priv->outbox_base + SPRD_MBOX_FIFO_DEPTH) + 1;
+ priv->mbox.dev = dev;
+ priv->mbox.chans = &priv->chan[0];
+ priv->mbox.num_chans = SPRD_MBOX_CHAN_MAX;
+ priv->mbox.ops = &sprd_mbox_ops;
+ priv->mbox.txdone_irq = true;
+
+ for (i = 0; i < SPRD_MBOX_CHAN_MAX; i++) {
+ priv->chan[i].con_priv = &priv->mchan[i];
+
+ priv->mchan[i].chan = &priv->chan[i];
+ priv->mchan[i].id = i;
+ }
+
+ ret = devm_mbox_controller_register(dev, &priv->mbox);
+ if (ret) {
+ dev_err(dev, "failed to register mailbox: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id sprd_mbox_of_match[] = {
+ { .compatible = "sprd,sc9860-mailbox", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sprd_mbox_of_match);
+
+static struct platform_driver sprd_mbox_driver = {
+ .driver = {
+ .name = "sprd-mailbox",
+ .of_match_table = sprd_mbox_of_match,
+ },
+ .probe = sprd_mbox_probe,
+};
+module_platform_driver(sprd_mbox_driver);
+
+MODULE_AUTHOR("Baolin Wang <[email protected]>");
+MODULE_DESCRIPTION("Spreadtrum mailbox driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Hi Jassi,
On Wed, Apr 1, 2020 at 1:57 PM Baolin Wang <[email protected]> wrote:
>
> From: Baolin Wang <[email protected]>
>
> The Spreadtrum mailbox controller supports 8 channels to communicate
> with MCUs, and it contains 2 different parts: inbox and outbox, which
> are used to send and receive messages by IRQ mode.
>
> Signed-off-by: Baolin Wang <[email protected]>
> Signed-off-by: Baolin Wang <[email protected]>
Do you have any comments for this patch? Thanks.
> ---
> Changes from v2:
> - None.
>
> Changes from v1:
> - None
> ---
> drivers/mailbox/Kconfig | 8 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/sprd-mailbox.c | 350 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 360 insertions(+)
> create mode 100644 drivers/mailbox/sprd-mailbox.c
>
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index ab4eb75..a33eaab 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -227,4 +227,12 @@ config ZYNQMP_IPI_MBOX
> message to the IPI buffer and will access the IPI control
> registers to kick the other processor or enquire status.
>
> +config SPRD_MBOX
> + tristate "Spreadtrum Mailbox"
> + depends on ARCH_SPRD || COMPILE_TEST
> + help
> + Mailbox driver implementation for the Spreadtrum platform. It is used
> + to send message between application processors and MCU. Say Y here if
> + you want to build the Spreatrum mailbox controller driver.
> +
> endif
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index c22fad6..0f47b6b 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -48,3 +48,5 @@ obj-$(CONFIG_STM32_IPCC) += stm32-ipcc.o
> obj-$(CONFIG_MTK_CMDQ_MBOX) += mtk-cmdq-mailbox.o
>
> obj-$(CONFIG_ZYNQMP_IPI_MBOX) += zynqmp-ipi-mailbox.o
> +
> +obj-$(CONFIG_SPRD_MBOX) += sprd-mailbox.o
> diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c
> new file mode 100644
> index 0000000..58e5388
> --- /dev/null
> +++ b/drivers/mailbox/sprd-mailbox.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Spreadtrum mailbox driver
> + *
> + * Copyright (c) 2020 Spreadtrum Communications Inc.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +
> +#define SPRD_MBOX_ID 0x0
> +#define SPRD_MBOX_MSG_LOW 0x4
> +#define SPRD_MBOX_MSG_HIGH 0x8
> +#define SPRD_MBOX_TRIGGER 0xc
> +#define SPRD_MBOX_FIFO_RST 0x10
> +#define SPRD_MBOX_FIFO_STS 0x14
> +#define SPRD_MBOX_IRQ_STS 0x18
> +#define SPRD_MBOX_IRQ_MSK 0x1c
> +#define SPRD_MBOX_LOCK 0x20
> +#define SPRD_MBOX_FIFO_DEPTH 0x24
> +
> +/* Bit and mask definiation for inbox's SPRD_MBOX_FIFO_STS register */
> +#define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16)
> +#define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8)
> +#define SPRD_INBOX_FIFO_DELIVER_SHIFT 16
> +#define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0)
> +
> +/* Bit and mask definiation for SPRD_MBOX_IRQ_STS register */
> +#define SPRD_MBOX_IRQ_CLR BIT(0)
> +
> +/* Bit and mask definiation for outbox's SPRD_MBOX_FIFO_STS register */
> +#define SPRD_OUTBOX_FIFO_FULL BIT(0)
> +#define SPRD_OUTBOX_FIFO_WR_SHIFT 16
> +#define SPRD_OUTBOX_FIFO_RD_SHIFT 24
> +#define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0)
> +
> +/* Bit and mask definiation for inbox's SPRD_MBOX_IRQ_MSK register */
> +#define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0)
> +#define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1)
> +#define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2)
> +#define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0)
> +
> +/* Bit and mask definiation for outbox's SPRD_MBOX_IRQ_MSK register */
> +#define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0)
> +#define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0)
> +
> +#define SPRD_MBOX_CHAN_MAX 8
> +
> +struct sprd_mbox_chan {
> + u8 id;
> + struct mbox_chan *chan;
> +};
> +
> +struct sprd_mbox_priv {
> + struct mbox_controller mbox;
> + struct device *dev;
> + void __iomem *inbox_base;
> + void __iomem *outbox_base;
> + struct clk *clk;
> + u32 outbox_fifo_depth;
> +
> + struct sprd_mbox_chan mchan[SPRD_MBOX_CHAN_MAX];
> + struct mbox_chan chan[SPRD_MBOX_CHAN_MAX];
> +};
> +
> +static struct sprd_mbox_priv *to_sprd_mbox_priv(struct mbox_controller *mbox)
> +{
> + return container_of(mbox, struct sprd_mbox_priv, mbox);
> +}
> +
> +static u32 sprd_mbox_get_fifo_len(struct sprd_mbox_priv *priv, u32 fifo_sts)
> +{
> + u32 wr_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_WR_SHIFT) &
> + SPRD_OUTBOX_FIFO_POS_MASK;
> + u32 rd_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_RD_SHIFT) &
> + SPRD_OUTBOX_FIFO_POS_MASK;
> + u32 fifo_len;
> +
> + /*
> + * If the read pointer is equal with write pointer, which means the fifo
> + * is full or empty.
> + */
> + if (wr_pos == rd_pos) {
> + if (fifo_sts & SPRD_OUTBOX_FIFO_FULL)
> + fifo_len = priv->outbox_fifo_depth;
> + else
> + fifo_len = 0;
> + } else if (wr_pos > rd_pos) {
> + fifo_len = wr_pos - rd_pos;
> + } else {
> + fifo_len = priv->outbox_fifo_depth - rd_pos + wr_pos;
> + }
> +
> + return fifo_len;
> +}
> +
> +static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data)
> +{
> + struct sprd_mbox_priv *priv = data;
> + struct sprd_mbox_chan *mchan;
> + u32 fifo_sts, fifo_len, msg[2];
> + int i, id;
> +
> + fifo_sts = readl(priv->outbox_base + SPRD_MBOX_FIFO_STS);
> +
> + fifo_len = sprd_mbox_get_fifo_len(priv, fifo_sts);
> + if (!fifo_len) {
> + dev_warn_ratelimited(priv->dev, "spurious outbox interrupt\n");
> + return IRQ_NONE;
> + }
> +
> + for (i = 0; i < fifo_len; i++) {
> + msg[0] = readl(priv->outbox_base + SPRD_MBOX_MSG_LOW);
> + msg[1] = readl(priv->outbox_base + SPRD_MBOX_MSG_HIGH);
> + id = readl(priv->outbox_base + SPRD_MBOX_ID);
> +
> + mchan = &priv->mchan[id];
> + mbox_chan_received_data(mchan->chan, (void *)msg);
> +
> + /* Trigger to update outbox FIFO pointer */
> + writel(0x1, priv->outbox_base + SPRD_MBOX_TRIGGER);
> + }
> +
> + /* Clear irq status after reading all message. */
> + writel(SPRD_MBOX_IRQ_CLR, priv->outbox_base + SPRD_MBOX_IRQ_STS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data)
> +{
> + struct sprd_mbox_priv *priv = data;
> + struct sprd_mbox_chan *mchan;
> + u32 fifo_sts, send_sts, id;
> +
> + fifo_sts = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS);
> +
> + /* Get the inbox data delivery status */
> + send_sts = (fifo_sts & SPRD_INBOX_FIFO_DELIVER_MASK) >>
> + SPRD_INBOX_FIFO_DELIVER_SHIFT;
> + if (!send_sts) {
> + dev_warn_ratelimited(priv->dev, "spurious inbox interrupt\n");
> + return IRQ_NONE;
> + }
> +
> + while (send_sts) {
> + id = __ffs(send_sts);
> + send_sts &= (send_sts - 1);
> +
> + mchan = &priv->mchan[id];
> + mbox_chan_txdone(mchan->chan, 0);
> + }
> +
> + /* Clear FIFO delivery and overflow status */
> + writel(fifo_sts &
> + (SPRD_INBOX_FIFO_DELIVER_MASK | SPRD_INBOX_FIFO_OVERLOW_MASK),
> + priv->inbox_base + SPRD_MBOX_FIFO_RST);
> +
> + /* Clear irq status */
> + writel(SPRD_MBOX_IRQ_CLR, priv->inbox_base + SPRD_MBOX_IRQ_STS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int sprd_mbox_send_data(struct mbox_chan *chan, void *msg)
> +{
> + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> + struct sprd_mbox_chan *mchan = chan->con_priv;
> + u32 *data = msg, busy;
> +
> + /*
> + * Check if current channel is busy or not, and we can not send data
> + * if current channel is busy.
> + */
> + busy = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS) &
> + SPRD_INBOX_FIFO_BUSY_MASK;
> + if (busy & BIT(mchan->id)) {
> + dev_err(priv->dev, "Channel %d is busy\n", mchan->id);
> + return -EBUSY;
> + }
> +
> + /* Write data into inbox FIFO, and only support 8 bytes every time */
> + writel(data[0], priv->inbox_base + SPRD_MBOX_MSG_LOW);
> + writel(data[1], priv->inbox_base + SPRD_MBOX_MSG_HIGH);
> +
> + /* Set target core id */
> + writel(mchan->id, priv->inbox_base + SPRD_MBOX_ID);
> +
> + /* Trigger remote request */
> + writel(0x1, priv->inbox_base + SPRD_MBOX_TRIGGER);
> +
> + return 0;
> +}
> +
> +static int sprd_mbox_startup(struct mbox_chan *chan)
> +{
> + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> + u32 val;
> +
> + /* Select outbox FIFO mode and reset the outbox FIFO status */
> + writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST);
> +
> + /* Enable inbox FIFO overflow and delivery interrupt */
> + val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> + val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ);
> + writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> +
> + /* Enable outbox FIFO not empty interrupt */
> + val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> + val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ;
> + writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> +
> + return 0;
> +}
> +
> +static void sprd_mbox_shutdown(struct mbox_chan *chan)
> +{
> + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> +
> + /* Disable inbox & outbox interrupt */
> + writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> + writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> +}
> +
> +static const struct mbox_chan_ops sprd_mbox_ops = {
> + .send_data = sprd_mbox_send_data,
> + .startup = sprd_mbox_startup,
> + .shutdown = sprd_mbox_shutdown,
> +};
> +
> +static void sprd_mbox_disable(void *data)
> +{
> + struct sprd_mbox_priv *priv = data;
> +
> + clk_disable_unprepare(priv->clk);
> +}
> +
> +static int sprd_mbox_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct sprd_mbox_priv *priv;
> + int i, ret, inbox_irq, outbox_irq;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> +
> + /*
> + * The Spreadtrum mailbox uses an inbox to send messages to the target
> + * core, and uses an outbox to receive messages from other cores.
> + *
> + * Thus the mailbox controller supplies 2 different register addresses
> + * and IRQ numbers for inbox and outbox.
> + */
> + priv->inbox_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->inbox_base))
> + return PTR_ERR(priv->inbox_base);
> +
> + priv->outbox_base = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(priv->outbox_base))
> + return PTR_ERR(priv->outbox_base);
> +
> + priv->clk = devm_clk_get(dev, "enable");
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev, "failed to get mailbox clock\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + ret = clk_prepare_enable(priv->clk);
> + if (ret)
> + return ret;
> +
> + ret = devm_add_action_or_reset(dev, sprd_mbox_disable, priv);
> + if (ret) {
> + dev_err(dev, "failed to add mailbox disable action\n");
> + return ret;
> + }
> +
> + inbox_irq = platform_get_irq(pdev, 0);
> + if (inbox_irq < 0)
> + return inbox_irq;
> +
> + ret = devm_request_irq(dev, inbox_irq, sprd_mbox_inbox_isr,
> + IRQF_NO_SUSPEND, dev_name(dev), priv);
> + if (ret) {
> + dev_err(dev, "failed to request inbox IRQ: %d\n", ret);
> + return ret;
> + }
> +
> + outbox_irq = platform_get_irq(pdev, 1);
> + if (outbox_irq < 0)
> + return outbox_irq;
> +
> + ret = devm_request_irq(dev, outbox_irq, sprd_mbox_outbox_isr,
> + IRQF_NO_SUSPEND, dev_name(dev), priv);
> + if (ret) {
> + dev_err(dev, "failed to request outbox IRQ: %d\n", ret);
> + return ret;
> + }
> +
> + /* Get the default outbox FIFO depth */
> + priv->outbox_fifo_depth =
> + readl(priv->outbox_base + SPRD_MBOX_FIFO_DEPTH) + 1;
> + priv->mbox.dev = dev;
> + priv->mbox.chans = &priv->chan[0];
> + priv->mbox.num_chans = SPRD_MBOX_CHAN_MAX;
> + priv->mbox.ops = &sprd_mbox_ops;
> + priv->mbox.txdone_irq = true;
> +
> + for (i = 0; i < SPRD_MBOX_CHAN_MAX; i++) {
> + priv->chan[i].con_priv = &priv->mchan[i];
> +
> + priv->mchan[i].chan = &priv->chan[i];
> + priv->mchan[i].id = i;
> + }
> +
> + ret = devm_mbox_controller_register(dev, &priv->mbox);
> + if (ret) {
> + dev_err(dev, "failed to register mailbox: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sprd_mbox_of_match[] = {
> + { .compatible = "sprd,sc9860-mailbox", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, sprd_mbox_of_match);
> +
> +static struct platform_driver sprd_mbox_driver = {
> + .driver = {
> + .name = "sprd-mailbox",
> + .of_match_table = sprd_mbox_of_match,
> + },
> + .probe = sprd_mbox_probe,
> +};
> +module_platform_driver(sprd_mbox_driver);
> +
> +MODULE_AUTHOR("Baolin Wang <[email protected]>");
> +MODULE_DESCRIPTION("Spreadtrum mailbox driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
--
Baolin Wang
Hi Jassi,
On Wed, Apr 8, 2020 at 10:20 AM Baolin Wang <[email protected]> wrote:
>
> Hi Jassi,
>
> On Wed, Apr 1, 2020 at 1:57 PM Baolin Wang <[email protected]> wrote:
> >
> > From: Baolin Wang <[email protected]>
> >
> > The Spreadtrum mailbox controller supports 8 channels to communicate
> > with MCUs, and it contains 2 different parts: inbox and outbox, which
> > are used to send and receive messages by IRQ mode.
> >
> > Signed-off-by: Baolin Wang <[email protected]>
> > Signed-off-by: Baolin Wang <[email protected]>
>
> Do you have any comments for this patch? Thanks.
Gentle ping, do you have any comments? Thanks.
> > ---
> > Changes from v2:
> > - None.
> >
> > Changes from v1:
> > - None
> > ---
> > drivers/mailbox/Kconfig | 8 +
> > drivers/mailbox/Makefile | 2 +
> > drivers/mailbox/sprd-mailbox.c | 350 +++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 360 insertions(+)
> > create mode 100644 drivers/mailbox/sprd-mailbox.c
> >
> > diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> > index ab4eb75..a33eaab 100644
> > --- a/drivers/mailbox/Kconfig
> > +++ b/drivers/mailbox/Kconfig
> > @@ -227,4 +227,12 @@ config ZYNQMP_IPI_MBOX
> > message to the IPI buffer and will access the IPI control
> > registers to kick the other processor or enquire status.
> >
> > +config SPRD_MBOX
> > + tristate "Spreadtrum Mailbox"
> > + depends on ARCH_SPRD || COMPILE_TEST
> > + help
> > + Mailbox driver implementation for the Spreadtrum platform. It is used
> > + to send message between application processors and MCU. Say Y here if
> > + you want to build the Spreatrum mailbox controller driver.
> > +
> > endif
> > diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> > index c22fad6..0f47b6b 100644
> > --- a/drivers/mailbox/Makefile
> > +++ b/drivers/mailbox/Makefile
> > @@ -48,3 +48,5 @@ obj-$(CONFIG_STM32_IPCC) += stm32-ipcc.o
> > obj-$(CONFIG_MTK_CMDQ_MBOX) += mtk-cmdq-mailbox.o
> >
> > obj-$(CONFIG_ZYNQMP_IPI_MBOX) += zynqmp-ipi-mailbox.o
> > +
> > +obj-$(CONFIG_SPRD_MBOX) += sprd-mailbox.o
> > diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c
> > new file mode 100644
> > index 0000000..58e5388
> > --- /dev/null
> > +++ b/drivers/mailbox/sprd-mailbox.c
> > @@ -0,0 +1,350 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Spreadtrum mailbox driver
> > + *
> > + * Copyright (c) 2020 Spreadtrum Communications Inc.
> > + */
> > +
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/clk.h>
> > +
> > +#define SPRD_MBOX_ID 0x0
> > +#define SPRD_MBOX_MSG_LOW 0x4
> > +#define SPRD_MBOX_MSG_HIGH 0x8
> > +#define SPRD_MBOX_TRIGGER 0xc
> > +#define SPRD_MBOX_FIFO_RST 0x10
> > +#define SPRD_MBOX_FIFO_STS 0x14
> > +#define SPRD_MBOX_IRQ_STS 0x18
> > +#define SPRD_MBOX_IRQ_MSK 0x1c
> > +#define SPRD_MBOX_LOCK 0x20
> > +#define SPRD_MBOX_FIFO_DEPTH 0x24
> > +
> > +/* Bit and mask definiation for inbox's SPRD_MBOX_FIFO_STS register */
> > +#define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16)
> > +#define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8)
> > +#define SPRD_INBOX_FIFO_DELIVER_SHIFT 16
> > +#define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0)
> > +
> > +/* Bit and mask definiation for SPRD_MBOX_IRQ_STS register */
> > +#define SPRD_MBOX_IRQ_CLR BIT(0)
> > +
> > +/* Bit and mask definiation for outbox's SPRD_MBOX_FIFO_STS register */
> > +#define SPRD_OUTBOX_FIFO_FULL BIT(0)
> > +#define SPRD_OUTBOX_FIFO_WR_SHIFT 16
> > +#define SPRD_OUTBOX_FIFO_RD_SHIFT 24
> > +#define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0)
> > +
> > +/* Bit and mask definiation for inbox's SPRD_MBOX_IRQ_MSK register */
> > +#define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0)
> > +#define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1)
> > +#define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2)
> > +#define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0)
> > +
> > +/* Bit and mask definiation for outbox's SPRD_MBOX_IRQ_MSK register */
> > +#define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0)
> > +#define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0)
> > +
> > +#define SPRD_MBOX_CHAN_MAX 8
> > +
> > +struct sprd_mbox_chan {
> > + u8 id;
> > + struct mbox_chan *chan;
> > +};
> > +
> > +struct sprd_mbox_priv {
> > + struct mbox_controller mbox;
> > + struct device *dev;
> > + void __iomem *inbox_base;
> > + void __iomem *outbox_base;
> > + struct clk *clk;
> > + u32 outbox_fifo_depth;
> > +
> > + struct sprd_mbox_chan mchan[SPRD_MBOX_CHAN_MAX];
> > + struct mbox_chan chan[SPRD_MBOX_CHAN_MAX];
> > +};
> > +
> > +static struct sprd_mbox_priv *to_sprd_mbox_priv(struct mbox_controller *mbox)
> > +{
> > + return container_of(mbox, struct sprd_mbox_priv, mbox);
> > +}
> > +
> > +static u32 sprd_mbox_get_fifo_len(struct sprd_mbox_priv *priv, u32 fifo_sts)
> > +{
> > + u32 wr_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_WR_SHIFT) &
> > + SPRD_OUTBOX_FIFO_POS_MASK;
> > + u32 rd_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_RD_SHIFT) &
> > + SPRD_OUTBOX_FIFO_POS_MASK;
> > + u32 fifo_len;
> > +
> > + /*
> > + * If the read pointer is equal with write pointer, which means the fifo
> > + * is full or empty.
> > + */
> > + if (wr_pos == rd_pos) {
> > + if (fifo_sts & SPRD_OUTBOX_FIFO_FULL)
> > + fifo_len = priv->outbox_fifo_depth;
> > + else
> > + fifo_len = 0;
> > + } else if (wr_pos > rd_pos) {
> > + fifo_len = wr_pos - rd_pos;
> > + } else {
> > + fifo_len = priv->outbox_fifo_depth - rd_pos + wr_pos;
> > + }
> > +
> > + return fifo_len;
> > +}
> > +
> > +static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data)
> > +{
> > + struct sprd_mbox_priv *priv = data;
> > + struct sprd_mbox_chan *mchan;
> > + u32 fifo_sts, fifo_len, msg[2];
> > + int i, id;
> > +
> > + fifo_sts = readl(priv->outbox_base + SPRD_MBOX_FIFO_STS);
> > +
> > + fifo_len = sprd_mbox_get_fifo_len(priv, fifo_sts);
> > + if (!fifo_len) {
> > + dev_warn_ratelimited(priv->dev, "spurious outbox interrupt\n");
> > + return IRQ_NONE;
> > + }
> > +
> > + for (i = 0; i < fifo_len; i++) {
> > + msg[0] = readl(priv->outbox_base + SPRD_MBOX_MSG_LOW);
> > + msg[1] = readl(priv->outbox_base + SPRD_MBOX_MSG_HIGH);
> > + id = readl(priv->outbox_base + SPRD_MBOX_ID);
> > +
> > + mchan = &priv->mchan[id];
> > + mbox_chan_received_data(mchan->chan, (void *)msg);
> > +
> > + /* Trigger to update outbox FIFO pointer */
> > + writel(0x1, priv->outbox_base + SPRD_MBOX_TRIGGER);
> > + }
> > +
> > + /* Clear irq status after reading all message. */
> > + writel(SPRD_MBOX_IRQ_CLR, priv->outbox_base + SPRD_MBOX_IRQ_STS);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data)
> > +{
> > + struct sprd_mbox_priv *priv = data;
> > + struct sprd_mbox_chan *mchan;
> > + u32 fifo_sts, send_sts, id;
> > +
> > + fifo_sts = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS);
> > +
> > + /* Get the inbox data delivery status */
> > + send_sts = (fifo_sts & SPRD_INBOX_FIFO_DELIVER_MASK) >>
> > + SPRD_INBOX_FIFO_DELIVER_SHIFT;
> > + if (!send_sts) {
> > + dev_warn_ratelimited(priv->dev, "spurious inbox interrupt\n");
> > + return IRQ_NONE;
> > + }
> > +
> > + while (send_sts) {
> > + id = __ffs(send_sts);
> > + send_sts &= (send_sts - 1);
> > +
> > + mchan = &priv->mchan[id];
> > + mbox_chan_txdone(mchan->chan, 0);
> > + }
> > +
> > + /* Clear FIFO delivery and overflow status */
> > + writel(fifo_sts &
> > + (SPRD_INBOX_FIFO_DELIVER_MASK | SPRD_INBOX_FIFO_OVERLOW_MASK),
> > + priv->inbox_base + SPRD_MBOX_FIFO_RST);
> > +
> > + /* Clear irq status */
> > + writel(SPRD_MBOX_IRQ_CLR, priv->inbox_base + SPRD_MBOX_IRQ_STS);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int sprd_mbox_send_data(struct mbox_chan *chan, void *msg)
> > +{
> > + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> > + struct sprd_mbox_chan *mchan = chan->con_priv;
> > + u32 *data = msg, busy;
> > +
> > + /*
> > + * Check if current channel is busy or not, and we can not send data
> > + * if current channel is busy.
> > + */
> > + busy = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS) &
> > + SPRD_INBOX_FIFO_BUSY_MASK;
> > + if (busy & BIT(mchan->id)) {
> > + dev_err(priv->dev, "Channel %d is busy\n", mchan->id);
> > + return -EBUSY;
> > + }
> > +
> > + /* Write data into inbox FIFO, and only support 8 bytes every time */
> > + writel(data[0], priv->inbox_base + SPRD_MBOX_MSG_LOW);
> > + writel(data[1], priv->inbox_base + SPRD_MBOX_MSG_HIGH);
> > +
> > + /* Set target core id */
> > + writel(mchan->id, priv->inbox_base + SPRD_MBOX_ID);
> > +
> > + /* Trigger remote request */
> > + writel(0x1, priv->inbox_base + SPRD_MBOX_TRIGGER);
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_mbox_startup(struct mbox_chan *chan)
> > +{
> > + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> > + u32 val;
> > +
> > + /* Select outbox FIFO mode and reset the outbox FIFO status */
> > + writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST);
> > +
> > + /* Enable inbox FIFO overflow and delivery interrupt */
> > + val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> > + val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ);
> > + writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> > +
> > + /* Enable outbox FIFO not empty interrupt */
> > + val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> > + val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ;
> > + writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_mbox_shutdown(struct mbox_chan *chan)
> > +{
> > + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
> > +
> > + /* Disable inbox & outbox interrupt */
> > + writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
> > + writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
> > +}
> > +
> > +static const struct mbox_chan_ops sprd_mbox_ops = {
> > + .send_data = sprd_mbox_send_data,
> > + .startup = sprd_mbox_startup,
> > + .shutdown = sprd_mbox_shutdown,
> > +};
> > +
> > +static void sprd_mbox_disable(void *data)
> > +{
> > + struct sprd_mbox_priv *priv = data;
> > +
> > + clk_disable_unprepare(priv->clk);
> > +}
> > +
> > +static int sprd_mbox_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct sprd_mbox_priv *priv;
> > + int i, ret, inbox_irq, outbox_irq;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->dev = dev;
> > +
> > + /*
> > + * The Spreadtrum mailbox uses an inbox to send messages to the target
> > + * core, and uses an outbox to receive messages from other cores.
> > + *
> > + * Thus the mailbox controller supplies 2 different register addresses
> > + * and IRQ numbers for inbox and outbox.
> > + */
> > + priv->inbox_base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(priv->inbox_base))
> > + return PTR_ERR(priv->inbox_base);
> > +
> > + priv->outbox_base = devm_platform_ioremap_resource(pdev, 1);
> > + if (IS_ERR(priv->outbox_base))
> > + return PTR_ERR(priv->outbox_base);
> > +
> > + priv->clk = devm_clk_get(dev, "enable");
> > + if (IS_ERR(priv->clk)) {
> > + dev_err(dev, "failed to get mailbox clock\n");
> > + return PTR_ERR(priv->clk);
> > + }
> > +
> > + ret = clk_prepare_enable(priv->clk);
> > + if (ret)
> > + return ret;
> > +
> > + ret = devm_add_action_or_reset(dev, sprd_mbox_disable, priv);
> > + if (ret) {
> > + dev_err(dev, "failed to add mailbox disable action\n");
> > + return ret;
> > + }
> > +
> > + inbox_irq = platform_get_irq(pdev, 0);
> > + if (inbox_irq < 0)
> > + return inbox_irq;
> > +
> > + ret = devm_request_irq(dev, inbox_irq, sprd_mbox_inbox_isr,
> > + IRQF_NO_SUSPEND, dev_name(dev), priv);
> > + if (ret) {
> > + dev_err(dev, "failed to request inbox IRQ: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + outbox_irq = platform_get_irq(pdev, 1);
> > + if (outbox_irq < 0)
> > + return outbox_irq;
> > +
> > + ret = devm_request_irq(dev, outbox_irq, sprd_mbox_outbox_isr,
> > + IRQF_NO_SUSPEND, dev_name(dev), priv);
> > + if (ret) {
> > + dev_err(dev, "failed to request outbox IRQ: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Get the default outbox FIFO depth */
> > + priv->outbox_fifo_depth =
> > + readl(priv->outbox_base + SPRD_MBOX_FIFO_DEPTH) + 1;
> > + priv->mbox.dev = dev;
> > + priv->mbox.chans = &priv->chan[0];
> > + priv->mbox.num_chans = SPRD_MBOX_CHAN_MAX;
> > + priv->mbox.ops = &sprd_mbox_ops;
> > + priv->mbox.txdone_irq = true;
> > +
> > + for (i = 0; i < SPRD_MBOX_CHAN_MAX; i++) {
> > + priv->chan[i].con_priv = &priv->mchan[i];
> > +
> > + priv->mchan[i].chan = &priv->chan[i];
> > + priv->mchan[i].id = i;
> > + }
> > +
> > + ret = devm_mbox_controller_register(dev, &priv->mbox);
> > + if (ret) {
> > + dev_err(dev, "failed to register mailbox: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id sprd_mbox_of_match[] = {
> > + { .compatible = "sprd,sc9860-mailbox", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, sprd_mbox_of_match);
> > +
> > +static struct platform_driver sprd_mbox_driver = {
> > + .driver = {
> > + .name = "sprd-mailbox",
> > + .of_match_table = sprd_mbox_of_match,
> > + },
> > + .probe = sprd_mbox_probe,
> > +};
> > +module_platform_driver(sprd_mbox_driver);
> > +
> > +MODULE_AUTHOR("Baolin Wang <[email protected]>");
> > +MODULE_DESCRIPTION("Spreadtrum mailbox driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 1.9.1
> >
>
>
> --
> Baolin Wang
--
Baolin Wang