Hi Linus,
This is the pull request for the block driver updates for 2.6.39. Two
things here:
- Big drbd update, as per usual...
- cciss update.
Please pull.
git://git.kernel.dk/linux-2.6-block.git for-2.6.39/drivers
Andreas Gruenbacher (22):
drbd: Removed an unnecessary #undef
drbd: Make sure that drbd_send() has sent the right number of bytes
drbd: Remove left-over prototype
drbd: Rename drbd_make_request_26 to drbd_make_request
drbd: Get rid of unnecessary macros (1)
drbd: Get rid of unnecessary macros (2)
drbd: Rename enum drbd_ret_codes to enum drbd_ret_code
drbd: Rename enum drbd_state_ret_codes to enum drbd_state_rv
drbd: Be more explicit about functions that return an enum drbd_state_rv
drbd: Another small enum drbd_state_rv cleanup
drbd: This code is dead now
drbd: Use the standard bool, true, and false keywords
drbd: drbd_nl_disk_conf: Avoid a compiler warning
drbd: receive_bitmap: Fix the wrong return value
drbd: receive_bitmap: Avoid casting enum drbd_state_rv to int
drbd: receive_bitmap: Missing free_page() on error path
drbd: send_bitmap_rle_or_plain: Get rid of ugly and useless enum
drbd: receive_bitmap_plain: Get rid of ugly and useless enum
drbd: Fix: drbd_bitmap_io does not return an enum determine_dev_size
drbd: Rename __inc_ap_bio_cond to may_inc_ap_bio
drbd: Remove useless / wrong comments
drbd: Remove unused function atodb_endio()
Bud Brown (1):
cciss: fix lost command issue
Jens Axboe (1):
Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation"
Lars Ellenberg (49):
drbd: only reset online-verify start sector if verify completed
drbd: improve online-verify progress tracking
drbd: initialize online-verify progress tracking on verify target
drbd: factor out advancement of resync marks for progress reporting
drbd: advance progress step marks for online-verify
drbd: show progress bar and ETA for online-verify
drbd: factor out drbd_rs_controller_reset
drbd: factor out drbd_rs_number_requests
drbd: use the resync controller for online-verify requests as well
drbd: fix potential wrap of 32bit oos:%lu display in /proc/drbd
drbd: further converge progress display of resync and online-verify
drbd: detect modification of in-flight buffers
drbd: debug: limit nelink-broadcast of request on digest mismatch to 32k
drbd: properly use max_hw_sectors to limit the our bio size
drbd: restore compatibility with 32bit kernels
drbd: Renamed write_flags_to_bio() to wire_flags_to_bio()
drbd: increase module count on /proc/drbd access
drbd: remove /proc/drbd before unregistering from netlink
drbd: use kzalloc and memset(,0,) to start with clean buffers in drbd_nl
drbd: add packet_type 27 (return_code_only) to netlink api
drbd: fix regression, we need to close drbd epochs during normal operation
drbd: fix incomplete error message
drbd: bitmap: don't count unused bits (fix non-terminating resync)
drbd: store in-core bitmap little endian, regardless of architecture
drbd: bitmap keep track of changes vs on-disk bitmap
drbd: allow petabyte storage on 64bit arch
drbd: get rid of unused debug code
drbd: Removed a reference to debug macros removed long time ago
drbd: move bitmap write from resync_finished to after_state_change
drbd: fix potential dereference of NULL pointer
drbd: add debugging assert to make sure the protocol is clean
drbd: serialize sending of resync uuid with pending w_send_oos
drbd: be less noisy with some log messages
drbd: spelling fix in log message
drbd: improve on bitmap write out timing
drbd: fix potential access of on-stack wait_queue_head_t after return
drbd: ratelimit io error messages
drbd: only generate and send a new sync uuid after a successful state change
drbd: serialize admin requests for new resync with pending bitmap io
drbd: don't pointlessly queue bitmap send, if we lost connection
drbd: queue bitmap writeout more intelligently
drbd: log UUIDs whenever they change
drbd: describe bitmap locking for bulk operation in finer detail
drbd: silence some noisy log messages during disconnect
drbd: fix potential imbalance of ap_in_flight
drbd: serialize admin requests for new verify run with pending bitmap io
drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
drbd: kill dead code
drbd: improve log message if received sector offset exceeds local capacity
Or Gerlitz (1):
drbd: drop code present under #ifdef which is relevant to 2.6.28 and below
Philipp Reisner (40):
drbd: Track the numbers of sectors in flight
drbd: New configuration parameters for dealing with network congestion
drbd: Implemented two new connection states Ahead/Behind
drbd: New packet for Ahead/Behind mode: P_OUT_OF_SYNC
drbd: When proxy's buffer drained off go into regular resync mode
drbd: Do not cleanup resync LRU for the Ahead/Behind SyncSource/SyncTarget transitions
drbd: Implemented priority inheritance for resync requests
drbd: Make some functions static
drbd: Implemented side-stepping in drbd_res_begin_io()
drbd: Begin to account BIO processing time before inc_ap_bio()
drbd: use test_and_set_bit() to decide if bm_io_work should be queued
drbd: Fixed inc_ap_bio()
drbd: Fixed race condition in drbd_queue_bitmap_io
drbd: Improvements in sanitize_state()
drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap
drbd: Becoming sync target may not happen out of < C_WF_REPORT_PARAMS
drbd: Removed 20 seconds upper bound for side-stepping
drbd: --force option for disconnect
drbd: Implemented the before-resync-source handler
drbd: Documenting drbd_should_do_remote() and drbd_should_send_oos()
drbd: There might be a resync after unfreezing IO due to no disk [Bugz 332]
drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions
drbd: No longer answer P_RS_DATA_REQUEST packets when in C_AHEAD mode
drbd: Be more careful with SyncSource -> Ahead transitions
drbd: Cleaned up the resync timer logic
drbd: Corrected off-by-one error in DRBD_MINOR_COUNT_MAX
drbd: Do not full sync if a P_SYNC_UUID packet gets lost
drbd: Nothing should stop SyncSource -> Ahead transitions
drbd: Work on the Ahead -> SyncSource transition
drbd: Do not drop net config if sending in drbd_send_protocol() fails
drbd: Killed an assert that is no longer valid
drbd: Fixed P_NEG_ACK processing for protocol A and B
drbd: Ensure that an epoch contains only requests of one kind
drbd: cleaned up __set_current_state() followed by schedule_timeout() calls
drbd: Provide hints with the error message when clearing the sync pause flag
drbd: We can not process BIOs with a size of 0
drbd: Removed left over, now wrong comments
drbd: Implemented real timeout checking for request processing time
drbd: Fixed handling of read errors on a 'VerifyT' node
drbd: Fixed handling of read errors on a 'VerifyS' node
Stephen M. Cameron (7):
cciss: export resettable host attribute
cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation
cciss: hoist tag masking out of loop
cciss: Inform controller we are using 32-bit tags.
cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
cciss: remove unnecessary casts
cciss: fix missed command status value CMD_UNABORTABLE
Stephen Rothwell (1):
drbd: need include for bitops functions declarations
.../ABI/testing/sysfs-bus-pci-devices-cciss | 12 +
drivers/block/cciss.c | 86 ++-
drivers/block/cciss.h | 1 +
drivers/block/cciss_cmd.h | 1 +
drivers/block/cciss_scsi.c | 13 +-
drivers/block/drbd/drbd_actlog.c | 335 +++-------
drivers/block/drbd/drbd_bitmap.c | 752 +++++++++++++-------
drivers/block/drbd/drbd_int.h | 270 +++++---
drivers/block/drbd/drbd_main.c | 673 ++++++++++++------
drivers/block/drbd/drbd_nl.c | 183 ++++--
drivers/block/drbd/drbd_proc.c | 114 +++-
drivers/block/drbd/drbd_receiver.c | 608 ++++++++++------
drivers/block/drbd/drbd_req.c | 169 ++++-
drivers/block/drbd/drbd_req.h | 36 +-
drivers/block/drbd/drbd_strings.c | 6 +-
drivers/block/drbd/drbd_worker.c | 360 +++++-----
drivers/block/drbd/drbd_wrappers.h | 2 +-
include/linux/drbd.h | 23 +-
include/linux/drbd_limits.h | 12 +-
include/linux/drbd_nl.h | 13 +-
include/linux/drbd_tag_magic.h | 1 +
21 files changed, 2267 insertions(+), 1403 deletions(-)
--
Jens Axboe
* Jens Axboe <[email protected]> wrote:
> Hi Linus,
>
> This is the pull request for the block driver updates for 2.6.39. Two
> things here:
>
> - Big drbd update, as per usual...
This driver does not build at all:
drivers/block/drbd/drbd_bitmap.c:1187:5: error: implicit declaration of function ‘generic_find_next_zero_le_bit’ [-Werror=implicit-function-declaration]
drivers/block/drbd/drbd_bitmap.c:1190:5: error: implicit declaration of function ‘generic_find_next_le_bit’ [-Werror=implicit-function-declaration]
drivers/block/drbd/drbd_bitmap.c:1290:4: error: implicit declaration of function ‘generic___test_and_set_le_bit’ [-Werror=implicit-function-declaration]
drivers/block/drbd/drbd_bitmap.c:1292:4: error: implicit declaration of function ‘generic___test_and_clear_le_bit’ [-Werror=implicit-function-declaration]
drivers/block/drbd/drbd_bitmap.c:1441:3: error: implicit declaration of function ‘generic_test_le_bit’ [-Werror=implicit-function-declaration]
Has this been build-tested? These APIs do not exist upstream.
Config attached.
Ingo
On Sun, Mar 27, 2011 at 9:23 PM, Ingo Molnar <[email protected]> wrote:
>
> This driver does not build at all:
>
> ?drivers/block/drbd/drbd_bitmap.c:1187:5: error: implicit declaration of function ?generic_find_next_zero_le_bit? [-Werror=implicit-function-declaration]
> ?drivers/block/drbd/drbd_bitmap.c:1190:5: error: implicit declaration of function ?generic_find_next_le_bit? [-Werror=implicit-function-declaration]
> ?drivers/block/drbd/drbd_bitmap.c:1290:4: error: implicit declaration of function ?generic___test_and_set_le_bit? [-Werror=implicit-function-declaration]
> ?drivers/block/drbd/drbd_bitmap.c:1292:4: error: implicit declaration of function ?generic___test_and_clear_le_bit? [-Werror=implicit-function-declaration]
> ?drivers/block/drbd/drbd_bitmap.c:1441:3: error: implicit declaration of function ?generic_test_le_bit? [-Werror=implicit-function-declaration]
>
> Has this been build-tested? These APIs do not exist upstream.
Actually, I think that's just a merge error - those horrible nasty
crazy names did use to exist.
Does this fix it? (Untested!)
Linus
* Linus Torvalds <[email protected]> wrote:
> On Sun, Mar 27, 2011 at 9:23 PM, Ingo Molnar <[email protected]> wrote:
> >
> > This driver does not build at all:
> >
> > drivers/block/drbd/drbd_bitmap.c:1187:5: error: implicit declaration of function ‘generic_find_next_zero_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1190:5: error: implicit declaration of function ‘generic_find_next_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1290:4: error: implicit declaration of function ‘generic___test_and_set_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1292:4: error: implicit declaration of function ‘generic___test_and_clear_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1441:3: error: implicit declaration of function ‘generic_test_le_bit’ [-Werror=implicit-function-declaration]
> >
> > Has this been build-tested? These APIs do not exist upstream.
>
> Actually, I think that's just a merge error - those horrible nasty
> crazy names did use to exist.
Yeah, indeed.
> Does this fix it? (Untested!)
It does, thanks!
Tested-by: Ingo Molnar <[email protected]>
Ingo
Hi Linus, Ingo,
On Sun, 27 Mar 2011 21:37:50 -0700 Linus Torvalds <[email protected]> wrote:
>
> On Sun, Mar 27, 2011 at 9:23 PM, Ingo Molnar <[email protected]> wrote:
> >
> > This driver does not build at all:
> >
> > drivers/block/drbd/drbd_bitmap.c:1187:5: error: implicit declaration of function ‘generic_find_next_zero_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1190:5: error: implicit declaration of function ‘generic_find_next_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1290:4: error: implicit declaration of function ‘generic___test_and_set_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1292:4: error: implicit declaration of function ‘generic___test_and_clear_le_bit’ [-Werror=implicit-function-declaration]
> > drivers/block/drbd/drbd_bitmap.c:1441:3: error: implicit declaration of function ‘generic_test_le_bit’ [-Werror=implicit-function-declaration]
> >
> > Has this been build-tested? These APIs do not exist upstream.
>
> Actually, I think that's just a merge error - those horrible nasty
> crazy names did use to exist.
>
> Does this fix it? (Untested!)
You also need to remove the include of asm-generic/bitops/le.h from that
file now (the easiest way is to revert commit f0ff1357ce39 ("drbd: need
include for bitops functions declarations").
Jens was informed about these problems when they appeared in linux-next.
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
On 2011-03-28 07:08, Stephen Rothwell wrote:
> Hi Linus, Ingo,
>
> On Sun, 27 Mar 2011 21:37:50 -0700 Linus Torvalds <[email protected]> wrote:
>>
>> On Sun, Mar 27, 2011 at 9:23 PM, Ingo Molnar <[email protected]> wrote:
>>>
>>> This driver does not build at all:
>>>
>>> drivers/block/drbd/drbd_bitmap.c:1187:5: error: implicit declaration of function ?generic_find_next_zero_le_bit? [-Werror=implicit-function-declaration]
>>> drivers/block/drbd/drbd_bitmap.c:1190:5: error: implicit declaration of function ?generic_find_next_le_bit? [-Werror=implicit-function-declaration]
>>> drivers/block/drbd/drbd_bitmap.c:1290:4: error: implicit declaration of function ?generic___test_and_set_le_bit? [-Werror=implicit-function-declaration]
>>> drivers/block/drbd/drbd_bitmap.c:1292:4: error: implicit declaration of function ?generic___test_and_clear_le_bit? [-Werror=implicit-function-declaration]
>>> drivers/block/drbd/drbd_bitmap.c:1441:3: error: implicit declaration of function ?generic_test_le_bit? [-Werror=implicit-function-declaration]
>>>
>>> Has this been build-tested? These APIs do not exist upstream.
>>
>> Actually, I think that's just a merge error - those horrible nasty
>> crazy names did use to exist.
>>
>> Does this fix it? (Untested!)
>
> You also need to remove the include of asm-generic/bitops/le.h from that
> file now (the easiest way is to revert commit f0ff1357ce39 ("drbd: need
> include for bitops functions declarations").
>
> Jens was informed about these problems when they appeared in linux-next.
Yes, and I merged your patch to fixup the build (on PPC, as I recall).
--
Jens Axboe
Hi Jens,
On Mon, 28 Mar 2011 08:43:56 +0200 Jens Axboe <[email protected]> wrote:
>
> Yes, and I merged your patch to fixup the build (on PPC, as I recall).
That was an earlier build problem.
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
On 2011-03-28 09:04, Stephen Rothwell wrote:
> Hi Jens,
>
> On Mon, 28 Mar 2011 08:43:56 +0200 Jens Axboe <[email protected]> wrote:
>>
>> Yes, and I merged your patch to fixup the build (on PPC, as I recall).
>
> That was an earlier build problem.
Seems I missed the last iteration of this.
--
Jens Axboe
On Sat, Mar 26, 2011 at 11:56 AM, Jens Axboe <[email protected]> wrote:
> Hi Linus,
>
> This is the pull request for the block driver updates for 2.6.39. Two
> things here:
>
> - Big drbd update, as per usual...
> - cciss update.
Btw, that cciss thing causes a very annoying compiler warning:
drivers/block/cciss.c: In function ?dev_show_unique_id?:
drivers/block/cciss.c:617:7: warning: ?sn[0]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[1]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[2]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[3]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[4]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[5]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[6]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[7]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[8]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[9]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[10]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[11]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[12]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[13]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[14]? may be used
uninitialized in this function
drivers/block/cciss.c:617:7: warning: ?sn[15]? may be used
uninitialized in this function
which is because the compiler doesn't really notice that those things
are only used if the error return isn't being set.
So it's a compiler mis-feature, but the thing is, the warning could
easily be avoided by just writing the code more prettily.
Just do the memcpy() unconditionally: we know that 'drv' is a valid
pointer (we just loaded 'h' off it), and we're talking about a nice
constant 16-byte copy.
IOW, a patch something like the attached.
Untested, but it looks really obvious. Hmm?
Linus
On 2011-03-29 01:06, Linus Torvalds wrote:
> On Sat, Mar 26, 2011 at 11:56 AM, Jens Axboe <[email protected]> wrote:
>> Hi Linus,
>>
>> This is the pull request for the block driver updates for 2.6.39. Two
>> things here:
>>
>> - Big drbd update, as per usual...
>> - cciss update.
>
> Btw, that cciss thing causes a very annoying compiler warning:
>
> drivers/block/cciss.c: In function ?dev_show_unique_id?:
> drivers/block/cciss.c:617:7: warning: ?sn[0]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[1]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[2]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[3]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[4]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[5]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[6]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[7]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[8]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[9]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[10]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[11]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[12]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[13]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[14]? may be used
> uninitialized in this function
> drivers/block/cciss.c:617:7: warning: ?sn[15]? may be used
> uninitialized in this function
>
> which is because the compiler doesn't really notice that those things
> are only used if the error return isn't being set.
>
> So it's a compiler mis-feature, but the thing is, the warning could
> easily be avoided by just writing the code more prettily.
>
> Just do the memcpy() unconditionally: we know that 'drv' is a valid
> pointer (we just loaded 'h' off it), and we're talking about a nice
> constant 16-byte copy.
>
> IOW, a patch something like the attached.
>
> Untested, but it looks really obvious. Hmm?
Looks good to me. I'm curious, you get a warning in dev_show_unique_id()
but not in dev_show_vendor() or any of the other following 4-5 functions
written in the same style?
My gcc here does not warn for any of them. But it is very convoluted for
what it does
--
Jens Axboe
FYI, i'm seeing a new block IO related boot failure. It starts by the kernel spewing:
[ 84.434778] blk: request botched
[ 84.437546] blk: request botched
[ 84.441532] blk: request botched
And after more dying noises, a colorful kernel crash in an apparently rarely
excercised error handler:
[ 270.181309] ata1.00: configured for UDMA/33
[ 270.184893] ata1.00: device reported invalid CHS sector 0
[ 270.188902] BUG: unable to handle kernel NULL pointer dereference at 0000022c
[ 270.192885] IP: [<c119d413>] __blk_recalc_rq_segments+0x53/0x210
[ 270.192885] *pde = 00000000
[ 270.192885] Oops: 0000 [#1] SMP
[ 270.192885] last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0/address
[ 270.192885] Modules linked in:
[ 270.192885]
[ 270.192885] Pid: 29, comm: scsi_eh_0 Not tainted 2.6.38-tip-11308-g785c78f-dirty #111495 System manufacturer System Product Name/A8N-E
[ 270.192885] EIP: 0060:[<c119d413>] EFLAGS: 00010202 CPU: 1
[ 270.192885] EIP is at __blk_recalc_rq_segments+0x53/0x210
[ 270.192885] EAX: 000001f4 EBX: f51e6680 ECX: 000001f4 EDX: ffffffff
[ 270.192885] ESI: 00000000 EDI: 3d80d000 EBP: f5b47de4 ESP: f5b47da0
[ 270.192885] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 270.192885] Process scsi_eh_0 (pid: 29, ti=f5b46000 task=f59cdf00 task.ti=f5b46000)
[ 270.192885] Stack:
[ 270.192885] 00000001 3d80ffff 0000ffff f702c180 0000e000 01b47db4 00001000 f51d3400
[ 270.192885] 000001f4 f5b5c000 f5417b48 00000000 0000e000 00000004 f515d820 0222ec01
[ 270.192885] f515d820 f5b47df0 c119d8e6 f51d3400 f5b47e30 c11969b8 f5b46000 00000000
[ 270.192885] Call Trace:
[ 270.192885] [<c119d8e6>] blk_recalc_rq_segments+0x16/0x20
[ 270.192885] [<c11969b8>] blk_update_request+0x358/0x4a0
[ 270.192885] [<c103ea55>] ? irq_exit+0x55/0x60
[ 270.192885] [<c1198ba3>] blk_update_bidi_request+0x13/0x70
[ 270.192885] [<c1199712>] blk_end_bidi_request+0x22/0x60
[ 270.192885] [<c1199767>] blk_end_request+0x17/0x20
[ 270.192885] [<c121c848>] scsi_io_completion+0x98/0x6a0
[ 270.192885] [<c124c184>] ? __ata_eh_qc_complete+0x54/0x70
[ 270.192885] [<c1213d46>] scsi_finish_command+0x96/0x110
[ 270.192885] [<c12194a7>] scsi_eh_flush_done_q+0xd7/0x130
[ 270.192885] [<c1251b1e>] ata_scsi_port_error_handler+0x60e/0x760
[ 270.192885] [<c13a8bbe>] ? _raw_spin_unlock_irqrestore+0xe/0x20
[ 270.192885] [<c1251cdf>] ata_scsi_error+0x6f/0xa0
[ 270.192885] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.192885] [<c12199b5>] scsi_error_handler+0xf5/0x5f0
[ 270.192885] [<c1030f50>] ? default_wake_function+0x10/0x20
[ 270.192885] [<c1026e77>] ? __wake_up_common+0x47/0x70
[ 270.192885] [<c102a727>] ? complete+0x47/0x50
[ 270.192885] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.192885] [<c105570d>] kthread+0x6d/0x70
[ 270.192885] [<c10556a0>] ? kthread_worker_fn+0x160/0x160
[ 270.192885] [<c13aa246>] kernel_thread_helper+0x6/0x10
[ 270.192885] Code: c7 45 f0 00 00 00 00 c7 45 ec 00 00 00 00 c7 45 e8 01 00 00 00 c7 45 e4 00 00 00 00 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 4d dc <8b> 51 38 66 8b 41 1a 8b 71 18 89 c1 81 e1 ff ff 00 00 66 39 c6
[ 270.192885] EIP: [<c119d413>] __blk_recalc_rq_segments+0x53/0x210 SS:ESP 0068:f5b47da0
Full bootlog below, that should give the hardware/driver type as well. Config attached.
NOTE: i booted this kernel for a second time, and the crash was not
reproducable anymore - so there's nothing to bisect.
I've attached the 'good' bootup below the 'bad' bootup.
The upstream sha1 is:
89078d572eb9ce8d4c04264b8b0ba86de0d74c8f md: Fix integrity registration error when no devices are capable
( The -tip commit you can see in the log is essencially Linus's kernel with
nothing included that should cause such symptoms AFAICS. )
Thanks,
Ingo
[ 0.000000] Linux version 2.6.38-tip-11308-g785c78f-dirty (mingo@sirius) (gcc version 4.6.0 20110304 (Red Hat 4.6.0-0.12) (GCC) ) #111495 SMP Tue Mar 29 13:22:16 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5680] f5680
[ 0.000000] mpc: f1400-f152c
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] mpc: f1400-f152c
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is PCI
[ 0.000000] Bus #2 is PCI
[ 0.000000] Bus #3 is PCI
[ 0.000000] Bus #4 is PCI
[ 0.000000] Bus #5 is PCI
[ 0.000000] Bus #6 is ISA
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s23120 r0 d21936 u2097152
[ 0.000000] pcpu-alloc: s23120 r0 d21936 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1031940k/1048512k available (3755k kernel code, 16120k reserved, 1437k data, 408k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1513000 - 0xc1579000 ( 408 kB)
[ 0.000000] .data : 0xc13aad6d - 0xc15123f0 (1437 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13aad6d (3755 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Hierarchical RCU autobalancing is disabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f640e000 soft=f6420000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.289 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.020001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.57 BogoMIPS (lpj=8041156)
[ 0.024004] pid_max: default: 32768 minimum: 301
[ 0.028119] Security Framework initialized
[ 0.032027] TOMOYO Linux initialized
[ 0.036063] Mount-cache hash table entries: 512
[ 0.040413] Initializing cgroup subsys debug
[ 0.044005] Initializing cgroup subsys ns
[ 0.048006] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.052005] Initializing cgroup subsys cpuacct
[ 0.056037] Initializing cgroup subsys memory
[ 0.060022] Initializing cgroup subsys devices
[ 0.064035] CPU: Physical Processor ID: 0
[ 0.068005] CPU: Processor Core ID: 0
[ 0.072848] ftrace: allocating 14875 entries in 30 pages
[ 0.080078] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.084009] enabled ExtINT on CPU#0
[ 0.088052] ExtINT not setup in hardware but reported by MP table
[ 0.092088] ENABLING IO-APIC IRQs
[ 0.096007] init IO_APIC IRQs
[ 0.100008] apic 2 pin 0 not connected
[ 0.104013] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.108014] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.112013] IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 27 Mode:1 Active:1)
[ 0.116006] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 29 Mode:1 Active:1)
[ 0.116006] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 35 Mode:1 Active:1)
[ 0.116006] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.116006] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.116006] apic 2 pin 16 not connected
[ 0.116006] apic 2 pin 17 not connected
[ 0.116006] apic 2 pin 18 not connected
[ 0.116006] apic 2 pin 19 not connected
[ 0.116006] apic 2 pin 20 not connected
[ 0.116006] apic 2 pin 21 not connected
[ 0.116006] apic 2 pin 22 not connected
[ 0.116006] apic 2 pin 23 not connected
[ 0.116006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.116006] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.116006] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.116006] ..... (found apic 0 pin 0) ...
[ 0.156302] ....... works.
[ 0.159004] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.165238] Using local APIC timer interrupts.
[ 0.165239] calibrating APIC timer ...
[ 0.172010] ... lapic delta = 1256509
[ 0.172010] ..... delta 1256509
[ 0.172010] ..... mult: 53963277
[ 0.172010] ..... calibration result: 804165
[ 0.172010] ..... CPU clock speed is 2010.1661 MHz.
[ 0.172010] ..... host bus clock speed is 201.0165 MHz.
[ 0.172010] ... verify APIC timer
[ 0.283699] ... jiffies delta = 25
[ 0.284018] ... jiffies result ok
[ 0.288040] calling trace_init_flags_sys_exit+0x0/0x11 @ 1
[ 0.292021] initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs
[ 0.296021] calling trace_init_flags_sys_enter+0x0/0x11 @ 1
[ 0.300021] initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs
[ 0.304020] calling init_hw_perf_events+0x0/0xe18 @ 1
[ 0.308019] Performance Events: AMD PMU driver.
[ 0.313511] ... version: 0
[ 0.316020] ... bit width: 48
[ 0.320020] ... generic registers: 4
[ 0.324020] ... value mask: 0000ffffffffffff
[ 0.328021] ... max period: 00007fffffffffff
[ 0.332021] ... fixed-purpose events: 0
[ 0.336021] ... event mask: 000000000000000f
[ 0.340052] initcall init_hw_perf_events+0x0/0xe18 returned 0 after 31251 usecs
[ 0.344024] calling migration_init+0x0/0x59 @ 1
[ 0.348025] initcall migration_init+0x0/0x59 returned 0 after 0 usecs
[ 0.352024] calling spawn_ksoftirqd+0x0/0x41 @ 1
[ 0.356040] initcall spawn_ksoftirqd+0x0/0x41 returned 0 after 0 usecs
[ 0.360025] calling init_workqueues+0x0/0x2d7 @ 1
[ 0.364111] initcall init_workqueues+0x0/0x2d7 returned 0 after 0 usecs
[ 0.368025] calling init_jump_label_module+0x0/0xf @ 1
[ 0.372026] initcall init_jump_label_module+0x0/0xf returned 0 after 0 usecs
[ 0.376025] calling init_jump_label+0x0/0xde @ 1
[ 0.380185] initcall init_jump_label+0x0/0xde returned 0 after 0 usecs
[ 0.384027] calling init_call_single_data+0x0/0x6e @ 1
[ 0.388026] initcall init_call_single_data+0x0/0x6e returned 0 after 0 usecs
[ 0.392026] calling cpu_stop_init+0x0/0x7f @ 1
[ 0.396042] initcall cpu_stop_init+0x0/0x7f returned 0 after 0 usecs
[ 0.400026] calling relay_init+0x0/0x11 @ 1
[ 0.404027] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
[ 0.408027] calling tracer_alloc_buffers+0x0/0x180 @ 1
[ 0.412117] initcall tracer_alloc_buffers+0x0/0x180 returned 0 after 0 usecs
[ 0.416027] calling init_trace_printk+0x0/0xf @ 1
[ 0.420028] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.424109] CPU 1 irqstacks, hard=f608a000 soft=f608c000
[ 0.428028] Booting Node 0, Processors #1 Ok.
[ 0.432822] smpboot cpu 1: start_ip = 9e000
[ 0.020001] Initializing CPU#1
[ 0.020001] masked ExtINT on CPU#1
[ 0.536111] Brought up 2 CPUs
[ 0.539073] Total of 2 processors activated (8041.44 BogoMIPS).
[ 0.540546] calling init_mmap_min_addr+0x0/0x11 @ 1
[ 0.544037] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[ 0.548035] calling net_ns_init+0x0/0xe0 @ 1
[ 0.552075] initcall net_ns_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.556038] calling e820_mark_nvs_memory+0x0/0x7 @ 1
[ 0.560037] initcall e820_mark_nvs_memory+0x0/0x7 returned 0 after 0 usecs
[ 0.564037] calling pci_reboot_init+0x0/0x11 @ 1
[ 0.568039] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.572037] calling reboot_init+0x0/0x11 @ 1
[ 0.576045] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.580038] calling init_lapic_sysfs+0x0/0x1b @ 1
[ 0.584038] initcall init_lapic_sysfs+0x0/0x1b returned 0 after 0 usecs
[ 0.588038] calling init_smp_flush+0x0/0x31 @ 1
[ 0.592039] initcall init_smp_flush+0x0/0x31 returned 0 after 0 usecs
[ 0.596039] calling alloc_frozen_cpus+0x0/0x10 @ 1
[ 0.600039] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
[ 0.604040] calling sysctl_init+0x0/0x29 @ 1
[ 0.608085] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs
[ 0.612040] calling ksysfs_init+0x0/0x74 @ 1
[ 0.616045] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[ 0.620040] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.624042] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.628040] calling pm_init+0x0/0x62 @ 1
[ 0.632056] initcall pm_init+0x0/0x62 returned 0 after 0 usecs
[ 0.636041] calling pm_disk_init+0x0/0x14 @ 1
[ 0.640043] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[ 0.644043] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.648043] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.652042] calling init_zero_pfn+0x0/0x43 @ 1
[ 0.656043] initcall init_zero_pfn+0x0/0x43 returned 0 after 0 usecs
[ 0.660043] calling fsnotify_init+0x0/0x22 @ 1
[ 0.664055] initcall fsnotify_init+0x0/0x22 returned 0 after 0 usecs
[ 0.668043] calling filelock_init+0x0/0x2f @ 1
[ 0.672056] initcall filelock_init+0x0/0x2f returned 0 after 0 usecs
[ 0.676044] calling init_script_binfmt+0x0/0x11 @ 1
[ 0.680045] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.684044] calling init_elf_binfmt+0x0/0x11 @ 1
[ 0.688045] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[ 0.692045] calling debugfs_init+0x0/0x4a @ 1
[ 0.696048] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[ 0.700045] calling securityfs_init+0x0/0x41 @ 1
[ 0.704047] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[ 0.708045] calling random32_init+0x0/0xa1 @ 1
[ 0.712046] initcall random32_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.716047] calling early_resume_init+0x0/0x1e0 @ 1
[ 0.720063] Time: 22:50:12 Date: 03/29/11
[ 0.724047] initcall early_resume_init+0x0/0x1e0 returned 0 after 3906 usecs
[ 0.728046] calling sock_init+0x0/0x7d @ 1
[ 0.732118] initcall sock_init+0x0/0x7d returned 0 after 0 usecs
[ 0.736047] calling net_inuse_init+0x0/0x22 @ 1
[ 0.740059] initcall net_inuse_init+0x0/0x22 returned 0 after 0 usecs
[ 0.744047] calling netpoll_init+0x0/0x2f @ 1
[ 0.748048] initcall netpoll_init+0x0/0x2f returned 0 after 0 usecs
[ 0.752048] calling netlink_proto_init+0x0/0x1a5 @ 1
[ 0.756052] NET: Registered protocol family 16
[ 0.760057] initcall netlink_proto_init+0x0/0x1a5 returned 0 after 3906 usecs
[ 0.764049] calling bdi_class_init+0x0/0x3c @ 1
[ 0.768087] initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs
[ 0.772050] calling kobject_uevent_init+0x0/0x1e @ 1
[ 0.776052] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[ 0.780050] calling gpiolib_sysfs_init+0x0/0x74 @ 1
[ 0.784062] initcall gpiolib_sysfs_init+0x0/0x74 returned 0 after 0 usecs
[ 0.788050] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.792056] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[ 0.796053] calling pci_driver_init+0x0/0xf @ 1
[ 0.800059] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[ 0.804052] calling tty_class_init+0x0/0x2b @ 1
[ 0.808056] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
[ 0.812052] calling vtconsole_class_init+0x0/0xc9 @ 1
[ 0.816079] initcall vtconsole_class_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.820053] calling wakeup_sources_debugfs_init+0x0/0x2f @ 1
[ 0.824056] initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs
[ 0.828053] calling amd_postcore_init+0x0/0x13e @ 1
[ 0.832056] node 0 link 0: io port [1000, fffff]
[ 0.836054] TOM: 0000000040000000 aka 1024M
[ 0.840054] node 0 link 0: mmio [e0000000, efffffff]
[ 0.844244] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.848245] node 0 link 0: mmio [a0000, bffff]
[ 0.852244] node 0 link 0: mmio [40000000, fed3ffff]
[ 0.856245] bus: [00, ff] on node 0 link 0
[ 0.860055] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.864055] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[ 0.868055] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[ 0.872055] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.876056] initcall amd_postcore_init+0x0/0x13e returned 0 after 42971 usecs
[ 0.880057] calling arch_kdebugfs_init+0x0/0x1e @ 1
[ 0.884059] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
[ 0.888057] calling init_pit_clocksource+0x0/0xac @ 1
[ 0.892058] initcall init_pit_clocksource+0x0/0xac returned 0 after 0 usecs
[ 0.896058] calling configure_trampolines+0x0/0x1f @ 1
[ 0.900058] initcall configure_trampolines+0x0/0x1f returned 0 after 0 usecs
[ 0.904057] calling mtrr_if_init+0x0/0x56 @ 1
[ 0.908059] initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs
[ 0.912058] calling dynamic_debug_init+0x0/0xfb @ 1
[ 0.916102] initcall dynamic_debug_init+0x0/0xfb returned 0 after 0 usecs
[ 0.920059] calling ab8500_gpio_init+0x0/0xf @ 1
[ 0.924068] initcall ab8500_gpio_init+0x0/0xf returned 0 after 0 usecs
[ 0.928060] calling dma_bus_init+0x0/0x32 @ 1
[ 0.932065] initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs
[ 0.936060] calling dma_channel_table_init+0x0/0xe0 @ 1
[ 0.940158] initcall dma_channel_table_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.944061] calling dmi_id_init+0x0/0x28d @ 1
[ 0.948093] initcall dmi_id_init+0x0/0x28d returned 0 after 0 usecs
[ 0.952061] calling pci_arch_init+0x0/0x55 @ 1
[ 0.962043] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[ 0.964060] PCI: Using configuration type 1 for base access
[ 0.968072] initcall pci_arch_init+0x0/0x55 returned 0 after 11719 usecs
[ 0.972062] calling topology_init+0x0/0x36 @ 1
[ 0.976073] initcall topology_init+0x0/0x36 returned 0 after 0 usecs
[ 0.980062] calling mtrr_init_finialize+0x0/0x30 @ 1
[ 0.984063] initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs
[ 0.988064] calling param_sysfs_init+0x0/0x15b @ 1
[ 0.992519] initcall param_sysfs_init+0x0/0x15b returned 0 after 0 usecs
[ 0.996064] calling pm_sysrq_init+0x0/0x20 @ 1
[ 1.000065] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 1.004064] calling default_bdi_init+0x0/0xaa @ 1
[ 1.008187] initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs
[ 1.012065] calling init_bio+0x0/0xe2 @ 1
[ 1.016104] bio: create slab <bio-0> at 0
[ 1.020069] initcall init_bio+0x0/0xe2 returned 0 after 3906 usecs
[ 1.024066] calling fsnotify_notification_init+0x0/0x9c @ 1
[ 1.028068] initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs
[ 1.032066] calling cryptomgr_init+0x0/0xf @ 1
[ 1.036066] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[ 1.040066] calling blk_settings_init+0x0/0x1d @ 1
[ 1.044067] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 1.048067] calling blk_ioc_init+0x0/0x2f @ 1
[ 1.052068] initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
[ 1.056067] calling blk_softirq_init+0x0/0x54 @ 1
[ 1.060068] initcall blk_softirq_init+0x0/0x54 returned 0 after 0 usecs
[ 1.064068] calling blk_iopoll_setup+0x0/0x54 @ 1
[ 1.068068] initcall blk_iopoll_setup+0x0/0x54 returned 0 after 0 usecs
[ 1.072068] calling genhd_device_init+0x0/0x6a @ 1
[ 1.076128] initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs
[ 1.080069] calling gpiolib_debugfs_init+0x0/0x2a @ 1
[ 1.084071] initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
[ 1.088070] calling pci_slot_init+0x0/0x50 @ 1
[ 1.092071] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 1.096070] calling pnp_init+0x0/0xf @ 1
[ 1.100078] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 1.104070] calling misc_init+0x0/0xad @ 1
[ 1.108079] initcall misc_init+0x0/0xad returned 0 after 0 usecs
[ 1.112071] calling vga_arb_device_init+0x0/0x82 @ 1
[ 1.116088] vgaarb: loaded
[ 1.118790] initcall vga_arb_device_init+0x0/0x82 returned 0 after 0 usecs
[ 1.120072] calling ab8500_sysctrl_init+0x0/0xf @ 1
[ 1.124078] initcall ab8500_sysctrl_init+0x0/0xf returned 0 after 0 usecs
[ 1.128072] calling init_scsi+0x0/0x90 @ 1
[ 1.132189] SCSI subsystem initialized
[ 1.136073] initcall init_scsi+0x0/0x90 returned 0 after 3906 usecs
[ 1.140073] calling ata_init+0x0/0x2aa @ 1
[ 1.144116] libata version 3.00 loaded.
[ 1.148074] initcall ata_init+0x0/0x2aa returned 0 after 3906 usecs
[ 1.152074] calling phy_init+0x0/0x28 @ 1
[ 1.156096] initcall phy_init+0x0/0x28 returned 0 after 0 usecs
[ 1.160074] calling usb_init+0x0/0x142 @ 1
[ 1.164094] usbcore: registered new interface driver usbfs
[ 1.168082] usbcore: registered new interface driver hub
[ 1.172095] usbcore: registered new device driver usb
[ 1.176076] initcall usb_init+0x0/0x142 returned 0 after 11719 usecs
[ 1.180075] calling serio_init+0x0/0x2e @ 1
[ 1.184083] initcall serio_init+0x0/0x2e returned 0 after 0 usecs
[ 1.188076] calling input_init+0x0/0xfd @ 1
[ 1.192084] initcall input_init+0x0/0xfd returned 0 after 0 usecs
[ 1.196076] calling leds_init+0x0/0x39 @ 1
[ 1.200084] initcall leds_init+0x0/0x39 returned 0 after 0 usecs
[ 1.204077] calling pci_subsys_init+0x0/0x44 @ 1
[ 1.208076] PCI: Probing PCI hardware
[ 1.212077] PCI: Probing PCI hardware (bus 00)
[ 1.216110] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 1.220137] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[ 1.224096] HPET not enabled in BIOS. You might try hpet=force boot option
[ 1.228085] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 1.232083] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
[ 1.236088] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
[ 1.240081] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
[ 1.244088] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 1.248080] pci 0000:00:01.1: PME# disabled
[ 1.252091] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 1.256085] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[ 1.260100] pci 0000:00:02.0: supports D1 D2
[ 1.264080] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.268081] pci 0000:00:02.0: PME# disabled
[ 1.272089] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 1.276087] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[ 1.280105] pci 0000:00:02.1: supports D1 D2
[ 1.284081] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.288082] pci 0000:00:02.1: PME# disabled
[ 1.292095] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[ 1.296087] pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
[ 1.300085] pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff]
[ 1.304085] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[ 1.308099] pci 0000:00:04.0: supports D1 D2
[ 1.312091] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[ 1.316098] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 1.320102] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 1.324099] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[ 1.328089] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[ 1.332087] pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007]
[ 1.336103] pci 0000:00:0a.0: supports D1 D2
[ 1.340085] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.344085] pci 0000:00:0a.0: PME# disabled
[ 1.348094] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[ 1.352105] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.356086] pci 0000:00:0b.0: PME# disabled
[ 1.360096] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[ 1.364105] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.368087] pci 0000:00:0c.0: PME# disabled
[ 1.372097] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[ 1.376106] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.380087] pci 0000:00:0d.0: PME# disabled
[ 1.384097] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 1.388106] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.392088] pci 0000:00:0e.0: PME# disabled
[ 1.396103] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 1.400105] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 1.404101] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 1.408101] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 1.412105] PCI: peer root bus 00 res updated from pci conf
[ 1.416109] pci 0000:05:07.0: [10ec:8139] type 0 class 0x000200
[ 1.420099] pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff]
[ 1.424095] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[ 1.428123] pci 0000:05:07.0: supports D1 D2
[ 1.432090] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[ 1.436092] pci 0000:05:07.0: PME# disabled
[ 1.440112] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 1.444092] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 1.448092] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
[ 1.452093] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.456092] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 1.460092] pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 1.464093] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[ 1.468093] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.472111] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 1.476095] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.480094] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.484095] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.488113] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 1.492095] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.496095] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.500096] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.504112] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.508096] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.512096] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.516097] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.520120] pci 0000:01:00.0: [1002:5b60] type 0 class 0x000300
[ 1.524103] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 1.528101] pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
[ 1.532101] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[ 1.536114] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.540109] pci 0000:01:00.0: supports D1 D2
[ 1.544111] pci 0000:01:00.1: [1002:5b70] type 0 class 0x000380
[ 1.548103] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[ 1.552134] pci 0000:01:00.1: supports D1 D2
[ 1.556106] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.560104] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 1.564101] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 1.568100] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 1.572101] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 1.576604] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.580420] pci 0000:00:00.0: default IRQ router [10de:005e]
[ 1.584112] PCI: pci_cache_line_size set to 64 bytes
[ 1.588110] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[ 1.592138] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.596101] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.600101] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 1.604104] initcall pci_subsys_init+0x0/0x44 returned 0 after 386742 usecs
[ 1.608102] calling proto_init+0x0/0xf @ 1
[ 1.612104] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 1.616102] calling net_dev_init+0x0/0x1cf @ 1
[ 1.620197] initcall net_dev_init+0x0/0x1cf returned 0 after 0 usecs
[ 1.624103] calling neigh_init+0x0/0x7a @ 1
[ 1.628103] initcall neigh_init+0x0/0x7a returned 0 after 0 usecs
[ 1.632103] calling pktsched_init+0x0/0xe4 @ 1
[ 1.636106] initcall pktsched_init+0x0/0xe4 returned 0 after 0 usecs
[ 1.640104] calling tc_filter_init+0x0/0x50 @ 1
[ 1.644104] initcall tc_filter_init+0x0/0x50 returned 0 after 0 usecs
[ 1.648104] calling tc_action_init+0x0/0x50 @ 1
[ 1.652105] initcall tc_action_init+0x0/0x50 returned 0 after 0 usecs
[ 1.656105] calling genl_init+0x0/0x7b @ 1
[ 1.660113] initcall genl_init+0x0/0x7b returned 0 after 0 usecs
[ 1.664105] calling sysctl_init+0x0/0x3b @ 1
[ 1.668107] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.672106] calling print_ICs+0x0/0x4f5 @ 1
[ 1.676105]
[ 1.676106] printing PIC contents
[ 1.680107] ... PIC IMR: fffa
[ 1.683155] ... PIC IRR: 0001
[ 1.684105] ... PIC ISR: 0001
[ 1.687157] ... PIC ELCR: 0828
[ 1.688107] printing local APIC contents on CPU#0/0:
[ 1.692105] ... APIC ID: 00000000 (0)
[ 1.692105] ... APIC VERSION: 00040010
[ 1.692105] ... APIC TASKPRI: 00000000 (00)
[ 1.692105] ... APIC ARBPRI: 000000e0 (e0)
[ 1.692105] ... APIC PROCPRI: 00000000
[ 1.692105] ... APIC LDR: 01000000
[ 1.692105] ... APIC DFR: ffffffff
[ 1.692105] ... APIC SPIV: 000001ff
[ 1.692105] ... APIC ISR field:
[ 1.692105] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.692105] ... APIC TMR field:
[ 1.692105] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.692105] ... APIC IRR field:
[ 1.692105] 0000000000000000000000000000000000000000000000000000000000008000
[ 1.692105] ... APIC ESR: 00000000
[ 1.692105] ... APIC ICR: 000008fd
[ 1.692105] ... APIC ICR2: 02000000
[ 1.692105] ... APIC LVTT: 000200ef
[ 1.692105] ... APIC LVTPC: 00000400
[ 1.692105] ... APIC LVT0: 00010700
[ 1.692105] ... APIC LVT1: 00000400
[ 1.692105] ... APIC LVTERR: 000000fe
[ 1.692105] ... APIC TMICT: 0000c454
[ 1.692105] ... APIC TMCCT: 0000b1f5
[ 1.692105] ... APIC TDCR: 00000003
[ 1.692105]
[ 1.692106] number of MP IRQ sources: 17.
[ 1.696106] number of IO-APIC #2 registers: 24.
[ 1.700106] testing the IO APIC.......................
[ 1.704109]
[ 1.708107] IO APIC #2......
[ 1.710981] .... register #00: 00000000
[ 1.712107] ....... : physical APIC id: 00
[ 1.716107] ....... : Delivery Type: 0
[ 1.720108] ....... : LTS : 0
[ 1.724108] .... register #01: 00170011
[ 1.728108] ....... : max redirection entries: 0017
[ 1.732108] ....... : PRQ implemented: 0
[ 1.736109] ....... : IO APIC version: 0011
[ 1.740109] .... register #02: 00000000
[ 1.744109] ....... : arbitration: 00
[ 1.748109] .... IRQ redirection table:
[ 1.752109] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 1.756112] 00 003 0 0 0 0 0 1 1 30
[ 1.763332] 01 003 0 0 0 0 0 1 1 31
[ 1.768112] 02 000 1 0 0 0 0 0 0 00
[ 1.772113] 03 003 1 1 0 1 0 1 1 29
[ 1.776113] 04 003 0 0 0 0 0 1 1 34
[ 1.784113] 05 003 1 1 0 1 0 1 1 41
[ 1.788114] 06 003 0 0 0 0 0 1 1 36
[ 1.792114] 07 003 1 0 0 0 0 1 1 37
[ 1.800114] 08 003 0 0 0 0 0 1 1 38
[ 1.804115] 09 003 0 0 0 0 0 1 1 39
[ 1.808115] 0a 003 0 0 0 0 0 1 1 3A
[ 1.815336] 0b 003 1 1 0 1 0 1 1 49
[ 1.820117] 0c 003 0 0 0 0 0 1 1 3C
[ 1.824116] 0d 003 0 0 0 0 0 1 1 3D
[ 1.831337] 0e 003 0 0 0 0 0 1 1 3E
[ 1.836117] 0f 003 0 0 0 0 0 1 1 3F
[ 1.840117] 10 000 1 0 0 0 0 0 0 00
[ 1.844117] 11 000 1 0 0 0 0 0 0 00
[ 1.852118] 12 000 1 0 0 0 0 0 0 00
[ 1.856118] 13 000 1 0 0 0 0 0 0 00
[ 1.860118] 14 000 1 0 0 0 0 0 0 00
[ 1.868119] 15 000 1 0 0 0 0 0 0 00
[ 1.872119] 16 000 1 0 0 0 0 0 0 00
[ 1.876119] 17 000 1 0 0 0 0 0 0 00
[ 1.883339] IRQ to pin mappings:
[ 1.884119] IRQ0 -> 0:0
[ 1.888845] IRQ1 -> 0:1
[ 1.892119] IRQ4 -> 0:4
[ 1.894594] IRQ6 -> 0:6
[ 1.896845] IRQ7 -> 0:7
[ 1.899322] IRQ8 -> 0:8
[ 1.900845] IRQ9 -> 0:9
[ 1.904307] IRQ10 -> 0:10
[ 1.906958] IRQ12 -> 0:12
[ 1.908932] IRQ13 -> 0:13
[ 1.912309] IRQ14 -> 0:14
[ 1.914959] IRQ15 -> 0:15
[ 1.916932] IRQ27 -> 0:3
[ 1.920308] IRQ29 -> 0:5
[ 1.922873] IRQ35 -> 0:11
[ 1.924933] .................................... done.
[ 1.928122] initcall print_ICs+0x0/0x4f5 returned 0 after 246109 usecs
[ 1.932122] calling hpet_late_init+0x0/0xdd @ 1
[ 1.936123] initcall hpet_late_init+0x0/0xdd returned -19 after 0 usecs
[ 1.940123] calling init_amd_nbs+0x0/0xb7 @ 1
[ 1.944160] initcall init_amd_nbs+0x0/0xb7 returned 0 after 0 usecs
[ 1.948124] calling clocksource_done_booting+0x0/0x4f @ 1
[ 1.952125] initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
[ 1.956124] calling ftrace_init_debugfs+0x0/0x21a @ 1
[ 1.960141] initcall ftrace_init_debugfs+0x0/0x21a returned 0 after 0 usecs
[ 1.964124] calling rb_init_debugfs+0x0/0x2f @ 1
[ 1.968133] initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs
[ 1.972125] calling tracer_init_debugfs+0x0/0x36e @ 1
[ 1.976193] initcall tracer_init_debugfs+0x0/0x36e returned 0 after 0 usecs
[ 1.980125] calling init_trace_printk_function_export+0x0/0x33 @ 1
[ 1.984127] initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 0 usecs
[ 1.988126] calling event_trace_init+0x0/0x269 @ 1
[ 1.993346] initcall event_trace_init+0x0/0x269 returned 0 after 0 usecs
[ 1.996129] calling init_pipe_fs+0x0/0x3d @ 1
[ 2.000163] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[ 2.004127] calling eventpoll_init+0x0/0xef @ 1
[ 2.008150] initcall eventpoll_init+0x0/0xef returned 0 after 0 usecs
[ 2.012127] calling anon_inode_init+0x0/0x102 @ 1
[ 2.016154] initcall anon_inode_init+0x0/0x102 returned 0 after 0 usecs
[ 2.020128] calling tomoyo_initerface_init+0x0/0x122 @ 1
[ 2.024168] initcall tomoyo_initerface_init+0x0/0x122 returned 0 after 0 usecs
[ 2.028128] calling blk_scsi_ioctl_init+0x0/0x288 @ 1
[ 2.032129] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
[ 2.036129] calling pnp_system_init+0x0/0xf @ 1
[ 2.040150] initcall pnp_system_init+0x0/0xf returned 0 after 0 usecs
[ 2.044129] calling pnpbios_init+0x0/0x34d @ 1
[ 2.048130] PnPBIOS: Scanning system for PnP BIOS support...
[ 2.052355] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc550
[ 2.056132] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc580, dseg 0xf0000
[ 2.060164] pnp 00:00: [irq 2]
[ 2.064131] pnp 00:00: [io 0x0020-0x0021]
[ 2.068130] pnp 00:00: [io 0x00a0-0x00a1]
[ 2.072153] pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
[ 2.076148] pnp 00:01: [dma 4]
[ 2.080131] pnp 00:01: [io 0x0000-0x000f]
[ 2.084131] pnp 00:01: [io 0x0081-0x0083]
[ 2.088131] pnp 00:01: [io 0x0087]
[ 2.092132] pnp 00:01: [io 0x0089-0x008b]
[ 2.096132] pnp 00:01: [io 0x008f-0x0091]
[ 2.100132] pnp 00:01: [io 0x00c0-0x00df]
[ 2.104146] pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
[ 2.108141] pnp 00:02: [irq 0]
[ 2.112133] pnp 00:02: [io 0x0040-0x0043]
[ 2.116146] pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active)
[ 2.120142] pnp 00:03: [irq 8]
[ 2.123196] pnp 00:03: [io 0x0070-0x0071]
[ 2.124147] pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 2.128145] pnp 00:04: [irq 1]
[ 2.132134] pnp 00:04: [io 0x0060]
[ 2.136134] pnp 00:04: [io 0x0064]
[ 2.140148] pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active)
[ 2.144144] pnp 00:05: [io 0x0061]
[ 2.148152] pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active)
[ 2.152145] pnp 00:06: [irq 13]
[ 2.156136] pnp 00:06: [io 0x00f0-0x00ff]
[ 2.160149] pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 2.164156] pnp 00:07: [mem 0x00000000-0x0009ffff]
[ 2.168137] pnp 00:07: [mem 0xfffe0000-0xffffffff]
[ 2.172137] pnp 00:07: [mem 0xfec00000-0xfec0ffff]
[ 2.176137] pnp 00:07: [mem 0xfee00000-0xfeefffff]
[ 2.180137] pnp 00:07: [mem 0xfefffc00-0xfeffffff]
[ 2.184138] pnp 00:07: [mem 0x00100000-0x00ffffff]
[ 2.188190] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.192139] system 00:07: [mem 0xfffe0000-0xffffffff] has been reserved
[ 2.196139] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 2.200139] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.204139] system 00:07: [mem 0xfefffc00-0xfeffffff] has been reserved
[ 2.208140] system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved
[ 2.212140] system 00:07: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 2.216155] pnp 00:08: [mem 0x000f0000-0x000f3fff]
[ 2.220140] pnp 00:08: [mem 0x000f4000-0x000f7fff]
[ 2.224140] pnp 00:08: [mem 0x000f8000-0x000fbfff]
[ 2.228140] pnp 00:08: [mem 0x000fc000-0x000fffff]
[ 2.232176] system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 2.236141] system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 2.240142] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 2.244142] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 2.248142] system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 2.252156] pnp 00:09: [io 0x0290-0x029f]
[ 2.256142] pnp 00:09: [io 0x04d0-0x04d1]
[ 2.260142] pnp 00:09: [io 0x0cf8-0x0cff]
[ 2.264160] pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 2.268223] pnp 00:0b: [irq 4]
[ 2.272143] pnp 00:0b: [io 0x03f8-0x03ff]
[ 2.276169] pnp 00:0b: Plug and Play BIOS device, IDs PNP0501 (active)
[ 2.280204] pnp 00:0c: [dma 2]
[ 2.284144] pnp 00:0c: [io 0x03f0-0x03f5]
[ 2.288144] pnp 00:0c: [io 0x03f7]
[ 2.292144] pnp 00:0c: [irq 6]
[ 2.295209] pnp 00:0c: Plug and Play BIOS device, IDs PNP0700 (active)
[ 2.296251] pnp 00:0e: [dma 3]
[ 2.300145] pnp 00:0e: [irq 7]
[ 2.304145] pnp 00:0e: [io 0x0378-0x037f]
[ 2.308145] pnp 00:0e: [io 0x0778-0x077f]
[ 2.312172] pnp 00:0e: Plug and Play BIOS device, IDs PNP0401 (active)
[ 2.316225] pnp 00:0f: [irq 10]
[ 2.320146] pnp 00:0f: [io 0x0330-0x0333]
[ 2.324166] pnp 00:0f: Plug and Play BIOS device, IDs PNPb006 (active)
[ 2.328218] pnp 00:10: [io 0x0201]
[ 2.332168] pnp 00:10: Plug and Play BIOS device, IDs PNPb02f (active)
[ 2.336147] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[ 2.340148] initcall pnpbios_init+0x0/0x34d returned 0 after 285174 usecs
[ 2.344148] calling chr_dev_init+0x0/0xc3 @ 1
[ 2.349517] initcall chr_dev_init+0x0/0xc3 returned 0 after 0 usecs
[ 2.352151] calling firmware_class_init+0x0/0x14 @ 1
[ 2.356158] initcall firmware_class_init+0x0/0x14 returned 0 after 0 usecs
[ 2.360150] calling pcibios_assign_resources+0x0/0x69 @ 1
[ 2.364183] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[ 2.368151] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff])
[ 2.372150] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[ 2.376150] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 2.380151] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
[ 2.384150] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 2.388151] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 2.392150] pci 0000:00:0b.0: bridge window [io disabled]
[ 2.396151] pci 0000:00:0b.0: bridge window [mem disabled]
[ 2.400151] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 2.404152] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 2.408151] pci 0000:00:0c.0: bridge window [io disabled]
[ 2.412152] pci 0000:00:0c.0: bridge window [mem disabled]
[ 2.416152] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 2.420153] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 2.424152] pci 0000:00:0d.0: bridge window [io disabled]
[ 2.428153] pci 0000:00:0d.0: bridge window [mem disabled]
[ 2.432153] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 2.436156] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[ 2.440154] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 2.444154] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 2.448155] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 2.452155] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 2.456160] pci 0000:00:09.0: setting latency timer to 64
[ 2.460157] pci 0000:00:0b.0: setting latency timer to 64
[ 2.464157] pci 0000:00:0c.0: setting latency timer to 64
[ 2.468157] pci 0000:00:0d.0: setting latency timer to 64
[ 2.472157] pci 0000:00:0e.0: setting latency timer to 64
[ 2.476157] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 2.480156] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[ 2.484156] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 2.488157] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 2.492157] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 2.496157] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[ 2.500157] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 2.504158] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[ 2.508158] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 2.512158] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[ 2.516159] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 2.520159] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 2.524159] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 2.528161] initcall pcibios_assign_resources+0x0/0x69 returned 0 after 160166 usecs
[ 2.532160] calling sysctl_core_init+0x0/0x2d @ 1
[ 2.536173] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs
[ 2.540160] calling inet_init+0x0/0x1d8 @ 1
[ 2.544207] NET: Registered protocol family 2
[ 2.548242] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.552385] IPv4 FIB: Using LC-trie version 0.409
[ 2.556254] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.560861] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.564506] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.568162] TCP reno registered
[ 2.572164] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.576174] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.580401] initcall inet_init+0x0/0x1d8 returned 0 after 35158 usecs
[ 2.584164] calling af_unix_init+0x0/0x4d @ 1
[ 2.588171] NET: Registered protocol family 1
[ 2.592168] initcall af_unix_init+0x0/0x4d returned 0 after 3906 usecs
[ 2.596165] calling pci_apply_final_quirks+0x0/0x10d @ 1
[ 2.616224] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.620168] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 2.624170] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.628197] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.632168] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 2.636171] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.640202] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.644169] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 2.648171] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.652206] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.656170] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 2.660172] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.664179] pci 0000:01:00.0: Boot video device
[ 2.668170] PCI: CLS 32 bytes, default 64
[ 2.672169] initcall pci_apply_final_quirks+0x0/0x10d returned 0 after 70316 usecs
[ 2.676170] calling default_rootfs+0x0/0x75 @ 1
[ 2.680204] initcall default_rootfs+0x0/0x75 returned 0 after 0 usecs
[ 2.684170] calling pci_iommu_init+0x0/0x48 @ 1
[ 2.694908] DMA-API: preallocated 32768 debug entries
[ 2.696170] DMA-API: debugging enabled by kernel config
[ 2.700175] initcall pci_iommu_init+0x0/0x48 returned 0 after 11719 usecs
[ 2.704171] calling i8259A_init_ops+0x0/0x1d @ 1
[ 2.708172] initcall i8259A_init_ops+0x0/0x1d returned 0 after 0 usecs
[ 2.712171] calling sbf_init+0x0/0xc2 @ 1
[ 2.716172] initcall sbf_init+0x0/0xc2 returned 0 after 0 usecs
[ 2.720172] calling init_tsc_clocksource+0x0/0x58 @ 1
[ 2.724179] initcall init_tsc_clocksource+0x0/0x58 returned 0 after 0 usecs
[ 2.728173] calling add_rtc_cmos+0x0/0x7b @ 1
[ 2.732175] initcall add_rtc_cmos+0x0/0x7b returned 0 after 0 usecs
[ 2.736173] calling i8237A_init_ops+0x0/0x11 @ 1
[ 2.740174] initcall i8237A_init_ops+0x0/0x11 returned 0 after 0 usecs
[ 2.744175] calling cache_sysfs_init+0x0/0x5e @ 1
[ 2.748261] initcall cache_sysfs_init+0x0/0x5e returned 0 after 0 usecs
[ 2.752175] calling ioapic_init_ops+0x0/0x54 @ 1
[ 2.756174] initcall ioapic_init_ops+0x0/0x54 returned 0 after 0 usecs
[ 2.760174] calling add_pcspkr+0x0/0x43 @ 1
[ 2.764202] initcall add_pcspkr+0x0/0x43 returned 0 after 0 usecs
[ 2.768175] calling proc_execdomains_init+0x0/0x27 @ 1
[ 2.772181] initcall proc_execdomains_init+0x0/0x27 returned 0 after 0 usecs
[ 2.776175] calling ioresources_init+0x0/0x44 @ 1
[ 2.780178] initcall ioresources_init+0x0/0x44 returned 0 after 0 usecs
[ 2.784176] calling uid_cache_init+0x0/0x83 @ 1
[ 2.788183] initcall uid_cache_init+0x0/0x83 returned 0 after 0 usecs
[ 2.792176] calling init_posix_timers+0x0/0x18f @ 1
[ 2.796179] initcall init_posix_timers+0x0/0x18f returned 0 after 0 usecs
[ 2.800177] calling init_posix_cpu_timers+0x0/0x9b @ 1
[ 2.804178] initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 0 usecs
[ 2.808177] calling nsproxy_cache_init+0x0/0x32 @ 1
[ 2.812179] initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 usecs
[ 2.816178] calling timekeeping_init_ops+0x0/0x11 @ 1
[ 2.820179] initcall timekeeping_init_ops+0x0/0x11 returned 0 after 0 usecs
[ 2.824178] calling init_clocksource_sysfs+0x0/0x43 @ 1
[ 2.828191] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 usecs
[ 2.832178] calling init_timer_list_procfs+0x0/0x30 @ 1
[ 2.836180] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 0 usecs
[ 2.840178] calling futex_init+0x0/0x57 @ 1
[ 2.844187] initcall futex_init+0x0/0x57 returned 0 after 0 usecs
[ 2.848179] calling proc_dma_init+0x0/0x27 @ 1
[ 2.852181] initcall proc_dma_init+0x0/0x27 returned 0 after 0 usecs
[ 2.856180] calling proc_modules_init+0x0/0x27 @ 1
[ 2.860185] initcall proc_modules_init+0x0/0x27 returned 0 after 0 usecs
[ 2.864180] calling kallsyms_init+0x0/0x2a @ 1
[ 2.868182] initcall kallsyms_init+0x0/0x2a returned 0 after 0 usecs
[ 2.872181] calling snapshot_device_init+0x0/0xf @ 1
[ 2.876216] initcall snapshot_device_init+0x0/0xf returned 0 after 0 usecs
[ 2.880182] calling crash_save_vmcoreinfo_init+0x0/0x508 @ 1
[ 2.884205] initcall crash_save_vmcoreinfo_init+0x0/0x508 returned 0 after 0 usecs
[ 2.888182] calling crash_notes_memory_init+0x0/0x33 @ 1
[ 2.892198] initcall crash_notes_memory_init+0x0/0x33 returned 0 after 0 usecs
[ 2.896182] calling rcutree_trace_init+0x0/0xfc @ 1
[ 2.900195] initcall rcutree_trace_init+0x0/0xfc returned 0 after 0 usecs
[ 2.904183] calling utsname_sysctl_init+0x0/0x11 @ 1
[ 2.908199] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 usecs
[ 2.912184] calling init_tracepoints+0x0/0x20 @ 1
[ 2.916185] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs
[ 2.920184] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 2.924185] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 2.928184] calling init_events+0x0/0x5d @ 1
[ 2.932187] initcall init_events+0x0/0x5d returned 0 after 0 usecs
[ 2.936185] calling init_function_trace+0x0/0x35 @ 1
[ 2.940187] initcall init_function_trace+0x0/0x35 returned 0 after 0 usecs
[ 2.944185] calling init_wakeup_tracer+0x0/0x1d @ 1
[ 2.948186] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 0 usecs
[ 2.952186] calling init_graph_trace+0x0/0x6c @ 1
[ 2.956187] initcall init_graph_trace+0x0/0x6c returned 0 after 0 usecs
[ 2.960186] calling perf_event_sysfs_init+0x0/0x95 @ 1
[ 2.964251] initcall perf_event_sysfs_init+0x0/0x95 returned 0 after 0 usecs
[ 2.968187] calling init_per_zone_wmark_min+0x0/0x67 @ 1
[ 2.972226] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 0 usecs
[ 2.976187] calling kswapd_init+0x0/0x1d @ 1
[ 2.980285] initcall kswapd_init+0x0/0x1d returned 0 after 0 usecs
[ 2.984188] calling setup_vmstat+0x0/0xcd @ 1
[ 2.988196] initcall setup_vmstat+0x0/0xcd returned 0 after 0 usecs
[ 2.992188] calling mm_sysfs_init+0x0/0x22 @ 1
[ 2.996192] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
[ 3.000190] calling proc_vmalloc_init+0x0/0x2a @ 1
[ 3.004191] initcall proc_vmalloc_init+0x0/0x2a returned 0 after 0 usecs
[ 3.008190] calling init_emergency_pool+0x0/0x79 @ 1
[ 3.012214] highmem bounce pool size: 64 pages
[ 3.016191] initcall init_emergency_pool+0x0/0x79 returned 0 after 3906 usecs
[ 3.020190] calling procswaps_init+0x0/0x27 @ 1
[ 3.024192] initcall procswaps_init+0x0/0x27 returned 0 after 0 usecs
[ 3.028191] calling ksm_init+0x0/0x15c @ 1
[ 3.032227] initcall ksm_init+0x0/0x15c returned 0 after 0 usecs
[ 3.036192] calling slab_proc_init+0x0/0x2a @ 1
[ 3.040194] initcall slab_proc_init+0x0/0x2a returned 0 after 0 usecs
[ 3.044192] calling slab_sysfs_init+0x0/0xef @ 1
[ 3.049783] initcall slab_sysfs_init+0x0/0xef returned 0 after 0 usecs
[ 3.052193] calling fcntl_init+0x0/0x2f @ 1
[ 3.056200] initcall fcntl_init+0x0/0x2f returned 0 after 0 usecs
[ 3.060193] calling proc_filesystems_init+0x0/0x27 @ 1
[ 3.064195] initcall proc_filesystems_init+0x0/0x27 returned 0 after 0 usecs
[ 3.068193] calling fsnotify_mark_init+0x0/0x46 @ 1
[ 3.072209] initcall fsnotify_mark_init+0x0/0x46 returned 0 after 0 usecs
[ 3.076194] calling dnotify_init+0x0/0x7c @ 1
[ 3.080247] initcall dnotify_init+0x0/0x7c returned 0 after 0 usecs
[ 3.084195] calling inotify_user_setup+0x0/0x78 @ 1
[ 3.088205] initcall inotify_user_setup+0x0/0x78 returned 0 after 0 usecs
[ 3.092195] calling fanotify_user_setup+0x0/0x5a @ 1
[ 3.096240] initcall fanotify_user_setup+0x0/0x5a returned 0 after 0 usecs
[ 3.100197] calling aio_setup+0x0/0xad @ 1
[ 3.104224] initcall aio_setup+0x0/0xad returned 0 after 0 usecs
[ 3.108196] calling proc_locks_init+0x0/0x27 @ 1
[ 3.112198] initcall proc_locks_init+0x0/0x27 returned 0 after 0 usecs
[ 3.116196] calling init_mbcache+0x0/0x11 @ 1
[ 3.120197] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
[ 3.124197] calling proc_cmdline_init+0x0/0x27 @ 1
[ 3.128199] initcall proc_cmdline_init+0x0/0x27 returned 0 after 0 usecs
[ 3.132197] calling proc_consoles_init+0x0/0x27 @ 1
[ 3.136199] initcall proc_consoles_init+0x0/0x27 returned 0 after 0 usecs
[ 3.140198] calling proc_cpuinfo_init+0x0/0x27 @ 1
[ 3.144200] initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 0 usecs
[ 3.148198] calling proc_devices_init+0x0/0x27 @ 1
[ 3.152200] initcall proc_devices_init+0x0/0x27 returned 0 after 0 usecs
[ 3.156199] calling proc_interrupts_init+0x0/0x27 @ 1
[ 3.160201] initcall proc_interrupts_init+0x0/0x27 returned 0 after 0 usecs
[ 3.164199] calling proc_loadavg_init+0x0/0x27 @ 1
[ 3.168201] initcall proc_loadavg_init+0x0/0x27 returned 0 after 0 usecs
[ 3.172200] calling proc_meminfo_init+0x0/0x27 @ 1
[ 3.176202] initcall proc_meminfo_init+0x0/0x27 returned 0 after 0 usecs
[ 3.180200] calling proc_stat_init+0x0/0x27 @ 1
[ 3.184202] initcall proc_stat_init+0x0/0x27 returned 0 after 0 usecs
[ 3.188201] calling proc_uptime_init+0x0/0x27 @ 1
[ 3.192203] initcall proc_uptime_init+0x0/0x27 returned 0 after 0 usecs
[ 3.196201] calling proc_version_init+0x0/0x27 @ 1
[ 3.200203] initcall proc_version_init+0x0/0x27 returned 0 after 0 usecs
[ 3.204202] calling proc_softirqs_init+0x0/0x27 @ 1
[ 3.208204] initcall proc_softirqs_init+0x0/0x27 returned 0 after 0 usecs
[ 3.212202] calling proc_kcore_init+0x0/0xae @ 1
[ 3.216206] initcall proc_kcore_init+0x0/0xae returned 0 after 0 usecs
[ 3.220203] calling proc_kmsg_init+0x0/0x2a @ 1
[ 3.224205] initcall proc_kmsg_init+0x0/0x2a returned 0 after 0 usecs
[ 3.228203] calling proc_page_init+0x0/0x4a @ 1
[ 3.232206] initcall proc_page_init+0x0/0x4a returned 0 after 0 usecs
[ 3.236204] calling configfs_init+0x0/0xc8 @ 1
[ 3.240283] initcall configfs_init+0x0/0xc8 returned 0 after 0 usecs
[ 3.244205] calling init_devpts_fs+0x0/0x3d @ 1
[ 3.248236] initcall init_devpts_fs+0x0/0x3d returned 0 after 0 usecs
[ 3.252205] calling init_ext3_fs+0x0/0x6c @ 1
[ 3.256283] initcall init_ext3_fs+0x0/0x6c returned 0 after 0 usecs
[ 3.260206] calling journal_init+0x0/0xd3 @ 1
[ 3.264329] initcall journal_init+0x0/0xd3 returned 0 after 0 usecs
[ 3.268206] calling init_ramfs_fs+0x0/0xf @ 1
[ 3.272208] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
[ 3.276206] calling init_pstore_fs+0x0/0xf @ 1
[ 3.280207] initcall init_pstore_fs+0x0/0xf returned 0 after 0 usecs
[ 3.284206] calling ipc_init+0x0/0x20 @ 1
[ 3.288209] msgmni has been set to 1743
[ 3.292210] initcall ipc_init+0x0/0x20 returned 0 after 3906 usecs
[ 3.296207] calling ipc_sysctl_init+0x0/0x11 @ 1
[ 3.300226] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 usecs
[ 3.304208] calling init_mqueue_fs+0x0/0x9f @ 1
[ 3.308290] initcall init_mqueue_fs+0x0/0x9f returned 0 after 0 usecs
[ 3.312208] calling key_proc_init+0x0/0x64 @ 1
[ 3.316212] initcall key_proc_init+0x0/0x64 returned 0 after 0 usecs
[ 3.320209] calling crypto_wq_init+0x0/0x38 @ 1
[ 3.324238] initcall crypto_wq_init+0x0/0x38 returned 0 after 0 usecs
[ 3.328210] calling crypto_algapi_init+0x0/0xc @ 1
[ 3.332212] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
[ 3.336210] calling skcipher_module_init+0x0/0x28 @ 1
[ 3.340210] initcall skcipher_module_init+0x0/0x28 returned 0 after 0 usecs
[ 3.344210] calling chainiv_module_init+0x0/0xf @ 1
[ 3.348212] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
[ 3.352211] calling eseqiv_module_init+0x0/0xf @ 1
[ 3.356212] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
[ 3.360211] calling hmac_module_init+0x0/0xf @ 1
[ 3.364212] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
[ 3.368212] calling md5_mod_init+0x0/0xf @ 1
[ 3.372279] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
[ 3.376213] calling sha1_generic_mod_init+0x0/0xf @ 1
[ 3.380257] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[ 3.384218] calling krng_mod_init+0x0/0xf @ 1
[ 3.388229] alg: No test for stdrng (krng)
[ 3.392223] initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs
[ 3.396215] calling proc_genhd_init+0x0/0x44 @ 1
[ 3.400217] initcall proc_genhd_init+0x0/0x44 returned 0 after 0 usecs
[ 3.404214] calling bsg_init+0x0/0x117 @ 1
[ 3.408266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 3.412216] initcall bsg_init+0x0/0x117 returned 0 after 3906 usecs
[ 3.416215] calling noop_init+0x0/0x11 @ 1
[ 3.420215] io scheduler noop registered (default)
[ 3.424215] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
[ 3.428216] calling percpu_counter_startup+0x0/0x16 @ 1
[ 3.432217] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs
[ 3.436216] calling dynamic_debug_init_debugfs+0x0/0x65 @ 1
[ 3.440220] initcall dynamic_debug_init_debugfs+0x0/0x65 returned 0 after 0 usecs
[ 3.444217] calling pci_proc_init+0x0/0x64 @ 1
[ 3.448264] initcall pci_proc_init+0x0/0x64 returned 0 after 0 usecs
[ 3.452217] calling pcie_portdrv_init+0x0/0x6f @ 1
[ 3.456243] pcieport 0000:00:0b.0: setting latency timer to 64
[ 3.460238] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 3.464255] pcieport 0000:00:0c.0: setting latency timer to 64
[ 3.468231] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 3.472249] pcieport 0000:00:0d.0: setting latency timer to 64
[ 3.476232] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 3.480252] pcieport 0000:00:0e.0: setting latency timer to 64
[ 3.484231] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 3.488258] initcall pcie_portdrv_init+0x0/0x6f returned 0 after 31251 usecs
[ 3.492220] calling pnpbios_thread_init+0x0/0x5e @ 1
[ 3.500234] initcall pnpbios_thread_init+0x0/0x5e returned 0 after 3906 usecs
[ 3.504222] calling isapnp_init+0x0/0x607 @ 1
[ 3.508231] isapnp: Scanning for PnP cards...
[ 3.868634] isapnp: No Plug & Play device found
[ 3.872244] initcall isapnp_init+0x0/0x607 returned 0 after 355490 usecs
[ 3.876244] calling pty_init+0x0/0x3a0 @ 1
[ 3.903314] initcall pty_init+0x0/0x3a0 returned 0 after 19532 usecs
[ 3.904247] calling sysrq_init+0x0/0x7a @ 1
[ 3.908257] initcall sysrq_init+0x0/0x7a returned 0 after 0 usecs
[ 3.912246] calling serial8250_init+0x0/0x151 @ 1
[ 3.916246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.924246] async_waiting @ 1
[ 3.928246] async_continuing @ 1 after 0 usec
[ 4.060370] async_waiting @ 1
[ 4.063332] async_continuing @ 1 after 0 usec
�[ 4.192417] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.292285] initcall serial8250_init+0x0/0x151 returned 0 after 367210 usecs
[ 4.296270] calling serial8250_pnp_init+0x0/0xf @ 1
[ 4.304271] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.332314] initcall serial8250_pnp_init+0x0/0xf returned 0 after 31251 usecs
[ 4.336273] calling serial8250_pci_init+0x0/0x16 @ 1
[ 4.340316] initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 usecs
[ 4.344274] calling rand_initialize+0x0/0x30 @ 1
[ 4.348303] initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs
[ 4.352274] calling init_tis+0x0/0xa5 @ 1
[ 4.356288] initcall init_tis+0x0/0xa5 returned 0 after 0 usecs
[ 4.360274] calling isa_bus_init+0x0/0x33 @ 1
[ 4.364295] initcall isa_bus_init+0x0/0x33 returned 0 after 0 usecs
[ 4.368276] calling topology_sysfs_init+0x0/0x5a @ 1
[ 4.372284] initcall topology_sysfs_init+0x0/0x5a returned 0 after 0 usecs
[ 4.376275] calling cpqarray_init+0x0/0x259 @ 1
[ 4.380274] Compaq SMART2 Driver (v 2.6.0)
[ 4.384299] initcall cpqarray_init+0x0/0x259 returned -19 after 3906 usecs
[ 4.388276] calling spi_transport_init+0x0/0x7c @ 1
[ 4.392291] initcall spi_transport_init+0x0/0x7c returned 0 after 0 usecs
[ 4.396277] calling ahc_linux_init+0x0/0x5a @ 1
[ 4.400301] initcall ahc_linux_init+0x0/0x5a returned 0 after 0 usecs
[ 4.404277] calling init_sd+0x0/0x113 @ 1
[ 4.408320] initcall init_sd+0x0/0x113 returned 0 after 0 usecs
[ 4.412277] calling ahci_init+0x0/0x16 @ 1
[ 4.416306] initcall ahci_init+0x0/0x16 returned 0 after 0 usecs
[ 4.420278] calling piix_init+0x0/0x24 @ 1
[ 4.424295] initcall piix_init+0x0/0x24 returned 0 after 0 usecs
[ 4.428278] calling nv_init+0x0/0x16 @ 1
[ 4.432292] initcall nv_init+0x0/0x16 returned 0 after 0 usecs
[ 4.436279] calling amd_init+0x0/0x16 @ 1
[ 4.440290] pata_amd 0000:00:06.0: version 0.4.1
[ 4.444324] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.448567] scsi0 : pata_amd
[ 4.451516] scsi1 : pata_amd
[ 4.452316] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 4.456280] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 4.460299] initcall amd_init+0x0/0x16 returned 0 after 19532 usecs
[ 4.460301] calling 1_async_port_probe+0x0/0x60 @ 5
[ 4.460320] calling 2_async_port_probe+0x0/0x60 @ 31
[ 4.460322] async_waiting @ 31
[ 4.464281] calling oldpiix_init+0x0/0x16 @ 1
[ 4.468294] initcall oldpiix_init+0x0/0x16 returned 0 after 0 usecs
[ 4.472281] calling via_init+0x0/0x16 @ 1
[ 4.476294] initcall via_init+0x0/0x16 returned 0 after 0 usecs
[ 4.480282] calling e1000_init_module+0x0/0x39 @ 1
[ 4.484281] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 4.488280] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 4.492298] initcall e1000_init_module+0x0/0x39 returned 0 after 7812 usecs
[ 4.496283] calling vortex_init+0x0/0x9e @ 1
[ 4.500296] initcall vortex_init+0x0/0x9e returned 0 after 0 usecs
[ 4.504283] calling e100_init_module+0x0/0x5a @ 1
[ 4.508282] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.512282] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.516299] initcall e100_init_module+0x0/0x5a returned 0 after 7812 usecs
[ 4.520284] calling tg3_init+0x0/0x16 @ 1
[ 4.524302] initcall tg3_init+0x0/0x16 returned 0 after 0 usecs
[ 4.528285] calling skge_init_module+0x0/0x63 @ 1
[ 4.532312] initcall skge_init_module+0x0/0x63 returned 0 after 0 usecs
[ 4.536285] calling net_olddevs_init+0x0/0x84 @ 1
[ 4.540290] initcall net_olddevs_init+0x0/0x84 returned 0 after 0 usecs
[ 4.544285] calling init_nic+0x0/0x16 @ 1
[ 4.548296] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 4.552309] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 35 Mode:1 Active:1)
[ 4.556289] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 35
[ 4.560287] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 4.632775] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 4.636291] ata1.00: 488397168 sectors, multi 1: LBA48
[ 4.644295] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 4.676707] ata1.00: configured for UDMA/100
[ 4.680300] async_waiting @ 5
[ 4.683263] async_continuing @ 5 after 0 usec
[ 4.688427] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 4.696510] initcall 1_async_port_probe+0x0/0x60 returned 0 after 230483 usecs
[ 4.700297] calling 3_sd_probe_async+0x0/0x1c0 @ 5
[ 4.704301] async_continuing @ 31 after 238296 usec
[ 4.712319] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.720337] sd 0:0:0:0: [sda] Write Protect is off
[ 4.724297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.728313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.816822] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 4.820717] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.824305] initcall 3_sd_probe_async+0x0/0x1c0 returned 0 after 109381 usecs
[ 4.872535] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[ 4.876310] ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[ 4.896467] ata2.01: configured for UDMA/33
[ 4.900962] async_waiting @ 31
[ 4.904308] async_continuing @ 31 after 0 usec
[ 4.905096] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
[ 4.916425] initcall 2_async_port_probe+0x0/0x60 returned 0 after 445340 usecs
[ 5.088701] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[ 5.092320] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 5.096335] initcall init_nic+0x0/0x16 returned 0 after 535189 usecs
[ 5.100321] calling rtl8139_init_module+0x0/0x16 @ 1
[ 5.104329] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.108339] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 35
[ 5.112789] 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 35
[ 5.116336] initcall rtl8139_init_module+0x0/0x16 returned 0 after 11719 usecs
[ 5.120322] calling init_netconsole+0x0/0x1cf @ 1
[ 5.124370] console [netcon0] enabled
[ 5.128321] netconsole: network logging started
[ 5.132323] initcall init_netconsole+0x0/0x1cf returned 0 after 7812 usecs
[ 5.136323] calling ehci_hcd_init+0x0/0xe2 @ 1
[ 5.140322] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.144323] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 5.148335] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 5.152324] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
[ 5.156325] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[ 5.160341] initcall ehci_hcd_init+0x0/0xe2 returned 0 after 19532 usecs
[ 5.164325] calling ohci_hcd_mod_init+0x0/0xb4 @ 1
[ 5.168324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.172324] ohci_hcd: block sizes: ed 64 td 64
[ 5.176334] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 5.180325] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
[ 5.184326] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[ 5.188337] initcall ohci_hcd_mod_init+0x0/0xb4 returned 0 after 19532 usecs
[ 5.192326] calling uhci_hcd_init+0x0/0x100 @ 1
[ 5.196325] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.200362] initcall uhci_hcd_init+0x0/0x100 returned 0 after 3906 usecs
[ 5.204327] calling i8042_init+0x0/0x3b9 @ 1
[ 5.208374] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 5.212326] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.217227] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.220335] initcall i8042_init+0x0/0x3b9 returned 0 after 11719 usecs
[ 5.224328] calling mousedev_init+0x0/0x7f @ 1
[ 5.228453] mousedev: PS/2 mouse device common for all mice
[ 5.232329] initcall mousedev_init+0x0/0x7f returned 0 after 3906 usecs
[ 5.236329] calling atkbd_init+0x0/0x20 @ 1
[ 5.240345] initcall atkbd_init+0x0/0x20 returned 0 after 0 usecs
[ 5.244329] calling flow_cache_init_global+0x0/0x112 @ 1
[ 5.248353] initcall flow_cache_init_global+0x0/0x112 returned 0 after 0 usecs
[ 5.252330] calling blackhole_module_init+0x0/0xf @ 1
[ 5.256331] initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.260330] calling sysctl_ipv4_init+0x0/0x71 @ 1
[ 5.264528] initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 0 usecs
[ 5.268332] calling ipv4_netfilter_init+0x0/0x20 @ 1
[ 5.272332] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
[ 5.276331] calling packet_init+0x0/0x39 @ 1
[ 5.280331] NET: Registered protocol family 17
[ 5.284337] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
[ 5.288332] calling update_mp_table+0x0/0x3f8 @ 1
[ 5.292333] initcall update_mp_table+0x0/0x3f8 returned 0 after 0 usecs
[ 5.296332] calling lapic_insert_resource+0x0/0x35 @ 1
[ 5.300334] initcall lapic_insert_resource+0x0/0x35 returned 0 after 0 usecs
[ 5.304333] calling print_ipi_mode+0x0/0x2d @ 1
[ 5.308332] Using IPI No-Shortcut mode
[ 5.312334] initcall print_ipi_mode+0x0/0x2d returned 0 after 3906 usecs
[ 5.316334] calling io_apic_bug_finalize+0x0/0x1a @ 1
[ 5.320334] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
[ 5.324334] calling check_early_ioremap_leak+0x0/0x54 @ 1
[ 5.328335] initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 0 usecs
[ 5.332335] calling pat_memtype_list_init+0x0/0x37 @ 1
[ 5.336338] initcall pat_memtype_list_init+0x0/0x37 returned 0 after 0 usecs
[ 5.340335] calling init_oops_id+0x0/0x50 @ 1
[ 5.344340] initcall init_oops_id+0x0/0x50 returned 0 after 0 usecs
[ 5.348336] calling printk_late_init+0x0/0x4d @ 1
[ 5.352337] initcall printk_late_init+0x0/0x4d returned 0 after 0 usecs
[ 5.356337] calling pm_qos_power_init+0x0/0xbd @ 1
[ 5.360425] initcall pm_qos_power_init+0x0/0xbd returned 0 after 0 usecs
[ 5.364337] calling software_resume+0x0/0x1f0 @ 1
[ 5.368336] PM: Hibernation image not present or could not be loaded.
[ 5.372339] initcall software_resume+0x0/0x1f0 returned -2 after 3906 usecs
[ 5.376337] initcall software_resume+0x0/0x1f0 returned with error code -2
[ 5.380338] calling taskstats_init+0x0/0x85 @ 1
[ 5.384342] registered taskstats version 1
[ 5.388338] initcall taskstats_init+0x0/0x85 returned 0 after 3906 usecs
[ 5.392338] calling clear_boot_tracer+0x0/0x2d @ 1
[ 5.396339] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[ 5.400340] calling max_swapfiles_check+0x0/0x7 @ 1
[ 5.404340] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs
[ 5.408339] calling init_ima+0x0/0x14 @ 1
[ 5.412339] IMA: No TPM chip found, activating TPM-bypass!
[ 5.416351] initcall init_ima+0x0/0x14 returned 0 after 3906 usecs
[ 5.420340] calling random32_reseed+0x0/0x7d @ 1
[ 5.424351] initcall random32_reseed+0x0/0x7d returned 0 after 0 usecs
[ 5.428341] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[ 5.432343] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[ 5.436341] calling pci_sysfs_init+0x0/0x44 @ 1
[ 5.440476] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
[ 5.444342] calling seqgen_init+0x0/0xe @ 1
[ 5.448355] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
[ 5.452342] calling late_resume_init+0x0/0x1f0 @ 1
[ 5.456342] Magic number: 3:284:857
[ 5.460346] bdi 8:0: hash matches
[ 5.463734] tty ptyv9: hash matches
[ 5.464350] tty ptysc: hash matches
[ 5.468377] initcall late_resume_init+0x0/0x1f0 returned 0 after 11719 usecs
[ 5.472344] calling hd_init+0x0/0x2d1 @ 1
[ 5.476387] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 5.480361] initcall hd_init+0x0/0x2d1 returned -1 after 3906 usecs
[ 5.484344] initcall hd_init+0x0/0x2d1 returned with error code -1
[ 5.488345] calling scsi_complete_async_scans+0x0/0x110 @ 1
[ 5.492345] initcall scsi_complete_async_scans+0x0/0x110 returned 0 after 0 usecs
[ 5.496345] calling memmap_init+0x0/0x30 @ 1
[ 5.500363] initcall memmap_init+0x0/0x30 returned 0 after 0 usecs
[ 5.504345] calling tcp_congestion_default+0x0/0xf @ 1
[ 5.508347] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
[ 5.512346] calling ip_auto_config+0x0/0xe20 @ 1
[ 5.516350] initcall ip_auto_config+0x0/0xe20 returned 0 after 0 usecs
[ 5.520346] calling initialize_hashrnd+0x0/0x16 @ 1
[ 5.524351] initcall initialize_hashrnd+0x0/0x16 returned 0 after 0 usecs
[ 5.528497] async_waiting @ 1
[ 5.532347] async_continuing @ 1 after 0 usec
[ 5.555805] EXT3-fs (sda1): recovery required on readonly filesystem
[ 5.556348] EXT3-fs (sda1): write access will be enabled during recovery
[ 5.560472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.564377] EXT3-fs: barriers not enabled
[ 5.595933] kjournald starting. Commit interval 5 seconds
[ 5.596422] EXT3-fs (sda1): recovery complete
[ 5.600731] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 5.604368] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 5.608363] async_waiting @ 1
[ 5.612352] async_continuing @ 1 after 0 usec
[ 5.616379] Freeing unused kernel memory: 408k freed
[ 5.658723] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
Setting clock (utc): Wed Mar 30 00:50:21 CEST 2011 [ OK ]
Loading default keymap (us): [ OK ]
Setting hostname mercury: [ OK ]
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
raidautorun: failed to open /dev/md0: No such device or address
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
device-mapper: version ioctl failed: Inappropriate ioctl for device
/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
device-mapper: version ioctl failed: Inappropriate ioctl for device
Command failed
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
Setting up Logical Volume Management: modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ramdisk: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/hda: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/md0: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/hda1: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/md1: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram2: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/hda2: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram3: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram4: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram5: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram6: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram7: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram8: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram9: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram10: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram11: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram12: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram13: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram14: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/ram15: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/hdb: open failed: No such device or address
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/dev/hdb2: open failed: No such device or address
No volume groups found
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/: clean, 514801/7685440 files, 5452963/7679062 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5
/home: recovering journal
/home: clean, 143806/6111232 files, 1767771/12209392 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ 9.755209] EXT3-fs (sda1): using internal journal
[ OK ]
Mounting local filesystems: mount: wrong fs [ 9.813640] EXT3-fs: barriers not enabled
type, bad option[ 9.816757] kjournald starting. Commit interval 5 seconds
, bad superblock[ 9.820895] EXT3-fs (sda5): using internal journal
on /dev/shm,
[ 9.824617] EXT3-fs (sda5): mounted filesystem with ordered data mode
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[FAILED]
Enabling local filesystem quotas: quotaon: Warning: No quota format detected in the kernel.
[ OK ]
Enabling /etc/fstab swaps: modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
swapon: /dev/hda2: No such device or address
[FAILED]
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting sshd: modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ OK ]modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
/etc/rc3.d/S99local: line 9: /proc/sys/kernel/exec-shield: No such file or directory
FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 13.542925] Adding 3911820k swap on /dev/sda2. Priority:-1 extents:1 across:3911820k
Starting Distributed Compiler daemon (distccd): modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
distccd[738] (dcc_setup_real_log) ERROR: failed to open /var/log/distccd.log: Permission denied
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ OK ]
/etc/rc3.d/S99local: line 32: /sys/kernel/uids/0/cpu_share: No such file or directory
/etc/rc3.d/S99local: line 34: /sys/kernel/uids//cpu_share: No such file or directory
NOT testing CPU hotplug
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
Performance counter stats for 'true':
<not counted> cache-misses
232,739 cache-references # 416.734 M/sec
8,042 branch-misses # 9.103 %
88,348 branches # 158.193 M/sec
514,894 instructions # 0.000 IPC
<not counted> cycles
121 page-faults # 0.217 M/sec
0 CPU-migrations # 0.000 M/sec
0 context-switches # 0.000 M/sec
0.558483 task-clock-msecs # 0.017 CPUs
0.032002000 seconds time elapsed
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
Fedora Core release 6 (Zod)
Kernel 2.6.38-tip-11308-g785c78f-dirty on an i686
mercury login: modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 84.067756] EXT3-fs: barriers not enabled
[ 84.090333] kjournald starting. Commit interval 5 seconds
[ 84.090574] EXT3-fs (sda6): using internal journal
[ 84.090578] EXT3-fs (sda6): recovery complete
[ 84.090849] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 84.434778] blk: request botched
[ 84.437546] blk: request botched
[ 84.441532] blk: request botched
[ 84.445016] blk: request botched
[ 84.445538] blk: request botched
[ 84.449542] blk: request botched
[ 84.453566] blk: request botched
[ 84.457930] blk: request botched
[ 84.461503] blk: request botched
[ 84.465511] blk: request botched
[ 84.469628] blk: request botched
[ 84.473508] blk: request botched
[ 84.477061] blk: request botched
[ 84.477502] blk: request botched
[ 84.481511] blk: request botched
[ 84.485627] blk: request botched
[ 84.489486] blk: request botched
[ 84.493610] blk: request botched
[ 84.497506] blk: request botched
[ 84.501533] blk: request botched
[ 84.504958] blk: request botched
[ 84.505509] blk: request botched
[ 84.509626] blk: request botched
[ 84.513486] blk: request botched
[ 84.517607] blk: request botched
[ 84.521506] blk: request botched
[ 84.525510] blk: request botched
[ 84.529517] blk: request botched
[ 84.532943] blk: request botched
[ 84.533611] blk: request botched
[ 84.537507] blk: request botched
[ 84.541487] blk: request botched
[ 84.545601] blk: request botched
[ 84.549485] blk: request botched
[ 84.553604] blk: request botched
[ 84.557328] blk: request botched
[ 84.560864] blk: request botched
[ 84.561484] blk: request botched
[ 84.565484] blk: request botched
[ 84.569606] blk: request botched
[ 84.573491] blk: request botched
[ 84.577599] blk: request botched
[ 84.581489] blk: request botched
[ 84.584912] blk: request botched
[ 84.585602] blk: request botched
[ 84.589489] blk: request botched
[ 84.593601] blk: request botched
[ 84.597486] blk: request botched
[ 84.601486] blk: request botched
[ 84.605608] blk: request botched
[ 84.609437] blk: request botched
[ 84.612974] blk: request botched
[ 84.613498] blk: request botched
[ 84.617643] blk: request botched
[ 84.621483] blk: request botched
[ 84.625486] blk: request botched
[ 84.629605] blk: request botched
[ 84.633491] blk: request botched
[ 84.637355] blk: request botched
[ 84.640786] blk: request botched
[ 84.641491] blk: request botched
[ 84.645602] blk: request botched
[ 84.649487] blk: request botched
[ 84.653589] blk: request botched
[ 84.657481] blk: request botched
[ 84.661490] blk: request botched
[ 84.665031] blk: request botched
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 114.811190] ata1: lost interrupt (Status 0x58)
[ 114.815187] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 114.819179] ata1.00: failed command: WRITE DMA EXT
[ 114.827182] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 114.827184] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 114.839178] ata1.00: status: { DRDY }
[ 114.843195] ata1: soft resetting link
[ 115.019694] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 115.051600] ata1.00: configured for UDMA/100
[ 115.055196] ata1.00: device reported invalid CHS sector 0
[ 115.059196] ata1: EH complete
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 145.897133] ata1: lost interrupt (Status 0x58)
[ 145.901130] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 145.905121] ata1.00: failed command: WRITE DMA EXT
[ 145.913125] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 145.913126] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 145.925121] ata1.00: status: { DRDY }
[ 145.929138] ata1: soft resetting link
[ 146.105626] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 146.137554] ata1.00: configured for UDMA/100
[ 146.141139] ata1.00: device reported invalid CHS sector 0
[ 146.145141] ata1: EH complete
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 176.875067] ata1: lost interrupt (Status 0x58)
[ 176.879065] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 176.883057] ata1.00: failed command: WRITE DMA EXT
[ 176.891061] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 176.891062] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 176.903057] ata1.00: status: { DRDY }
[ 176.907074] ata1: soft resetting link
[ 177.083561] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 177.115489] ata1.00: configured for UDMA/100
[ 177.119075] ata1.00: device reported invalid CHS sector 0
[ 177.123077] ata1: EH complete
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 207.853003] ata1: lost interrupt (Status 0x58)
[ 207.857000] ata1.00: limiting speed to UDMA/66:PIO4
[ 207.860994] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 207.868994] ata1.00: failed command: WRITE DMA EXT
[ 207.872997] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 207.872998] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 207.888993] ata1.00: status: { DRDY }
[ 207.892662] ata1: soft resetting link
[ 208.065497] ata1: nv_mode_filter: 0x1f39f&0x3f3ff->0x1f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 208.097424] ata1.00: configured for UDMA/66
[ 208.101011] ata1.00: device reported invalid CHS sector 0
[ 208.105013] ata1: EH complete
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 238.830939] ata1: lost interrupt (Status 0x58)
[ 238.834937] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 238.838929] ata1.00: failed command: WRITE DMA EXT
[ 238.846933] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 238.846934] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 238.858929] ata1.00: status: { DRDY }
[ 238.862946] ata1: soft resetting link
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 239.039443] ata1: nv_mode_filter: 0x1f39f&0x3f3ff->0x1f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 239.071367] ata1.00: configured for UDMA/66
[ 239.074947] ata1.00: device reported invalid CHS sector 0
[ 239.078951] ata1: EH complete
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
ssh: connect to host d port 22: No route to host
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 269.936882] ata1: lost interrupt (Status 0x58)
[ 269.940880] ata1.00: limiting speed to UDMA/33:PIO4
[ 269.944873] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 269.952874] ata1.00: failed command: WRITE DMA EXT
[ 269.956877] ata1.00: cmd 35/00:00:56:b4:10/00:04:0c:00:00/e0 tag 0 dma 524288 out
[ 269.956878] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 269.972873] ata1.00: status: { DRDY }
[ 269.976543] ata1: soft resetting link
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
modprobe: FATAL: Could not load /lib/modules/2.6.38-tip-11308-g785c78f-dirty/modules.dep: No such file or directory
[ 270.149384] ata1: nv_mode_filter: 0x739f&0x3f3ff->0x739f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 270.181309] ata1.00: configured for UDMA/33
[ 270.184893] ata1.00: device reported invalid CHS sector 0
[ 270.188902] BUG: unable to handle kernel NULL pointer dereference at 0000022c
[ 270.192885] IP: [<c119d413>] __blk_recalc_rq_segments+0x53/0x210
[ 270.192885] *pde = 00000000
[ 270.192885] Oops: 0000 [#1] SMP
[ 270.192885] last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0/address
[ 270.192885] Modules linked in:
[ 270.192885]
[ 270.192885] Pid: 29, comm: scsi_eh_0 Not tainted 2.6.38-tip-11308-g785c78f-dirty #111495 System manufacturer System Product Name/A8N-E
[ 270.192885] EIP: 0060:[<c119d413>] EFLAGS: 00010202 CPU: 1
[ 270.192885] EIP is at __blk_recalc_rq_segments+0x53/0x210
[ 270.192885] EAX: 000001f4 EBX: f51e6680 ECX: 000001f4 EDX: ffffffff
[ 270.192885] ESI: 00000000 EDI: 3d80d000 EBP: f5b47de4 ESP: f5b47da0
[ 270.192885] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 270.192885] Process scsi_eh_0 (pid: 29, ti=f5b46000 task=f59cdf00 task.ti=f5b46000)
[ 270.192885] Stack:
[ 270.192885] 00000001 3d80ffff 0000ffff f702c180 0000e000 01b47db4 00001000 f51d3400
[ 270.192885] 000001f4 f5b5c000 f5417b48 00000000 0000e000 00000004 f515d820 0222ec01
[ 270.192885] f515d820 f5b47df0 c119d8e6 f51d3400 f5b47e30 c11969b8 f5b46000 00000000
[ 270.192885] Call Trace:
[ 270.192885] [<c119d8e6>] blk_recalc_rq_segments+0x16/0x20
[ 270.192885] [<c11969b8>] blk_update_request+0x358/0x4a0
[ 270.192885] [<c103ea55>] ? irq_exit+0x55/0x60
[ 270.192885] [<c1198ba3>] blk_update_bidi_request+0x13/0x70
[ 270.192885] [<c1199712>] blk_end_bidi_request+0x22/0x60
[ 270.192885] [<c1199767>] blk_end_request+0x17/0x20
[ 270.192885] [<c121c848>] scsi_io_completion+0x98/0x6a0
[ 270.192885] [<c124c184>] ? __ata_eh_qc_complete+0x54/0x70
[ 270.192885] [<c1213d46>] scsi_finish_command+0x96/0x110
[ 270.192885] [<c12194a7>] scsi_eh_flush_done_q+0xd7/0x130
[ 270.192885] [<c1251b1e>] ata_scsi_port_error_handler+0x60e/0x760
[ 270.192885] [<c13a8bbe>] ? _raw_spin_unlock_irqrestore+0xe/0x20
[ 270.192885] [<c1251cdf>] ata_scsi_error+0x6f/0xa0
[ 270.192885] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.192885] [<c12199b5>] scsi_error_handler+0xf5/0x5f0
[ 270.192885] [<c1030f50>] ? default_wake_function+0x10/0x20
[ 270.192885] [<c1026e77>] ? __wake_up_common+0x47/0x70
[ 270.192885] [<c102a727>] ? complete+0x47/0x50
[ 270.192885] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.192885] [<c105570d>] kthread+0x6d/0x70
[ 270.192885] [<c10556a0>] ? kthread_worker_fn+0x160/0x160
[ 270.192885] [<c13aa246>] kernel_thread_helper+0x6/0x10
[ 270.192885] Code: c7 45 f0 00 00 00 00 c7 45 ec 00 00 00 00 c7 45 e8 01 00 00 00 c7 45 e4 00 00 00 00 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 4d dc <8b> 51 38 66 8b 41 1a 8b 71 18 89 c1 81 e1 ff ff 00 00 66 39 c6
[ 270.192885] EIP: [<c119d413>] __blk_recalc_rq_segments+0x53/0x210 SS:ESP 0068:f5b47da0
[ 270.192885] CR2: 000000000000022c
[ 270.444906] ---[ end trace 01447d57669c61d1 ]---
[ 270.448903] Kernel panic - not syncing: Fatal exception
[ 270.452904] Pid: 29, comm: scsi_eh_0 Tainted: G D 2.6.38-tip-11308-g785c78f-dirty #111495
[ 270.460903] Call Trace:
[ 270.464905] [<c13a3a20>] ? printk+0x1d/0x1f
[ 270.468905] [<c13a390e>] panic+0x5c/0x151
[ 270.472905] [<c1005bd3>] oops_end+0xb3/0xc0
[ 270.476905] [<c13a33fa>] no_context+0x135/0x13d
[ 270.480906] [<c13a3543>] __bad_area_nosemaphore+0x141/0x149
[ 270.488908] [<c11ae04e>] ? __delay+0xe/0x10
[ 270.492907] [<c11ae074>] ? __const_udelay+0x24/0x30
[ 270.496907] [<c1021d50>] ? vmalloc_sync_all+0x150/0x150
[ 270.500907] [<c13a3562>] bad_area_nosemaphore+0x17/0x19
[ 270.508907] [<c10220b3>] do_page_fault+0x363/0x400
[ 270.512908] [<c11ae074>] ? __const_udelay+0x24/0x30
[ 270.516909] [<c11f6367>] ? wait_for_xmitr+0x37/0x90
[ 270.520909] [<c105ba17>] ? sched_clock_local+0xe7/0x190
[ 270.528909] [<c105bbf7>] ? sched_clock_cpu+0xc7/0x150
[ 270.532909] [<c1021d50>] ? vmalloc_sync_all+0x150/0x150
[ 270.536909] [<c13a9a57>] error_code+0x67/0x70
[ 270.540910] [<c119d413>] ? __blk_recalc_rq_segments+0x53/0x210
[ 270.548910] [<c119d8e6>] blk_recalc_rq_segments+0x16/0x20
[ 270.552911] [<c11969b8>] blk_update_request+0x358/0x4a0
[ 270.560911] [<c103ea55>] ? irq_exit+0x55/0x60
[ 270.564911] [<c1198ba3>] blk_update_bidi_request+0x13/0x70
[ 270.568912] [<c1199712>] blk_end_bidi_request+0x22/0x60
[ 270.572912] [<c1199767>] blk_end_request+0x17/0x20
[ 270.580912] [<c121c848>] scsi_io_completion+0x98/0x6a0
[ 270.584913] [<c124c184>] ? __ata_eh_qc_complete+0x54/0x70
[ 270.588913] [<c1213d46>] scsi_finish_command+0x96/0x110
[ 270.596913] [<c12194a7>] scsi_eh_flush_done_q+0xd7/0x130
[ 270.600913] [<c1251b1e>] ata_scsi_port_error_handler+0x60e/0x760
[ 270.604914] [<c13a8bbe>] ? _raw_spin_unlock_irqrestore+0xe/0x20
[ 270.612914] [<c1251cdf>] ata_scsi_error+0x6f/0xa0
[ 270.616914] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.620914] [<c12199b5>] scsi_error_handler+0xf5/0x5f0
[ 270.628915] [<c1030f50>] ? default_wake_function+0x10/0x20
[ 270.632915] [<c1026e77>] ? __wake_up_common+0x47/0x70
[ 270.636915] [<c102a727>] ? complete+0x47/0x50
[ 270.644916] [<c12198c0>] ? scsi_eh_get_sense+0x1f0/0x1f0
[ 270.648916] [<c105570d>] kthread+0x6d/0x70
[ 270.652917] [<c10556a0>] ? kthread_worker_fn+0x160/0x160
[ 270.656917] [<c13aa246>] kernel_thread_helper+0x6/0x10
Linux version 2.6.38-tip-11308-g785c78f-dirty (mingo@sirius) (gcc version 4.6.0 20110304 (Red Hat 4.6.0-0.12) (GCC) ) #111496 SMP PREEMPT Tue Mar 29 13:23:53 CEST 2011
Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=1 panic=1 3 no_hz=off hpet=disable idle=poll highmem=512m nopat pci=nomsi
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
debug: ignoring loglevel setting.
using polling idle threads.
PAT support disabled.
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
found SMP MP-table at [ffff8800000f5680] f5680
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 3ffed000-3fff0000
ACPI: RSDP 00000000000f76f0 00014 (v00 Nvidia)
ACPI: RSDT 000000003fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000003fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000003fff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000003fff0000 00040
ACPI: SRAT 000000003fff9500 000A0 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: MCFG 000000003fff9600 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000003fff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000003fff0000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-000000003fff0000
NODE_DATA [000000003ffde000 - 000000003ffecfff]
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254504 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88003fc00000 s79504 r0 d22896 u1048576
pcpu-alloc: s79504 r0 d22896 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258426
Policy zone: DMA32
Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=1 panic=1 3 no_hz=off hpet=disable idle=poll highmem=512m nopat pci=nomsi
sysrq: sysrq always enabled.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Memory: 1017344k/1048512k available (8430k kernel code, 452k absent, 30716k reserved, 5133k data, 548k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:56 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled, bootconsole disabled
Fast TSC calibration using PIT
Detected 2010.420 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.84 BogoMIPS (lpj=20104200)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20110316
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
calling init_hw_perf_events+0x0/0xd86 @ 1
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
initcall init_hw_perf_events+0x0/0xd86 returned 0 after 29296 usecs
calling migration_init+0x0/0x6c @ 1
initcall migration_init+0x0/0x6c returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x4a @ 1
initcall spawn_ksoftirqd+0x0/0x4a returned 0 after 19531 usecs
calling init_workqueues+0x0/0x260 @ 1
initcall init_workqueues+0x0/0x260 returned 0 after 0 usecs
calling init_call_single_data+0x0/0x7f @ 1
initcall init_call_single_data+0x0/0x7f returned 0 after 0 usecs
calling cpu_stop_init+0x0/0x9c @ 1
initcall cpu_stop_init+0x0/0x9c returned 0 after 19531 usecs
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (8041.52 BogoMIPS).
devtmpfs: initialized
calling init_mmap_min_addr+0x0/0x11 @ 1
initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
calling net_ns_init+0x0/0xeb @ 1
initcall net_ns_init+0x0/0xeb returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x2e @ 1
initcall cpufreq_tsc+0x0/0x2e returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x11 @ 1
initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x1d @ 1
initcall init_lapic_sysfs+0x0/0x1d returned 0 after 0 usecs
calling init_smp_flush+0x0/0x66 @ 1
initcall init_smp_flush+0x0/0x66 returned 0 after 0 usecs
calling alloc_frozen_cpus+0x0/0x3 @ 1
initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
calling sysctl_init+0x0/0x2f @ 1
initcall sysctl_init+0x0/0x2f returned 0 after 0 usecs
calling ksysfs_init+0x0/0x8a @ 1
initcall ksysfs_init+0x0/0x8a returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xc @ 1
initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 usecs
calling pm_init+0x0/0x32 @ 1
initcall pm_init+0x0/0x32 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x32 @ 1
initcall init_zero_pfn+0x0/0x32 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x23 @ 1
initcall fsnotify_init+0x0/0x23 returned 0 after 0 usecs
calling filelock_init+0x0/0x2c @ 1
initcall filelock_init+0x0/0x2c returned 0 after 0 usecs
calling init_script_binfmt+0x0/0xe @ 1
initcall init_script_binfmt+0x0/0xe returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0xe @ 1
initcall init_elf_binfmt+0x0/0xe returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0xe @ 1
initcall init_compat_elf_binfmt+0x0/0xe returned 0 after 0 usecs
calling debugfs_init+0x0/0x50 @ 1
initcall debugfs_init+0x0/0x50 returned 0 after 0 usecs
calling securityfs_init+0x0/0x47 @ 1
initcall securityfs_init+0x0/0x47 returned 0 after 0 usecs
calling random32_init+0x0/0xcb @ 1
initcall random32_init+0x0/0xcb returned 0 after 0 usecs
calling test_atomic64+0x0/0x404 @ 1
atomic64 test passed for x86-64 platform with CX8 and with SSE
initcall test_atomic64+0x0/0x404 returned 0 after 9765 usecs
calling regulator_init+0x0/0x61 @ 1
print_constraints: dummy:
initcall regulator_init+0x0/0x61 returned 0 after 0 usecs
calling cpufreq_core_init+0x0/0x97 @ 1
initcall cpufreq_core_init+0x0/0x97 returned 0 after 0 usecs
calling sock_init+0x0/0x7e @ 1
initcall sock_init+0x0/0x7e returned 0 after 0 usecs
calling net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
calling netpoll_init+0x0/0x2c @ 1
initcall netpoll_init+0x0/0x2c returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x19d @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x19d returned 0 after 0 usecs
calling bdi_class_init+0x0/0x47 @ 1
initcall bdi_class_init+0x0/0x47 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x1d @ 1
initcall kobject_uevent_init+0x0/0x1d returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x13 @ 1
initcall pcibus_class_init+0x0/0x13 returned 0 after 0 usecs
calling pci_driver_init+0x0/0xc @ 1
initcall pci_driver_init+0x0/0xc returned 0 after 0 usecs
calling rio_bus_init+0x0/0x2c @ 1
initcall rio_bus_init+0x0/0x2c returned 0 after 0 usecs
calling backlight_class_init+0x0/0x5c @ 1
initcall backlight_class_init+0x0/0x5c returned 0 after 0 usecs
calling tty_class_init+0x0/0x31 @ 1
initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xd7 @ 1
initcall vtconsole_class_init+0x0/0xd7 returned 0 after 0 usecs
calling wakeup_sources_debugfs_init+0x0/0x28 @ 1
initcall wakeup_sources_debugfs_init+0x0/0x28 returned 0 after 0 usecs
calling register_node_type+0x0/0x23 @ 1
initcall register_node_type+0x0/0x23 returned 0 after 0 usecs
calling i2c_init+0x0/0x72 @ 1
initcall i2c_init+0x0/0x72 returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x146 @ 1
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [feb00000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fed3ffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
initcall amd_postcore_init+0x0/0x146 returned 0 after 39062 usecs
calling arch_kdebugfs_init+0x0/0x21 @ 1
initcall arch_kdebugfs_init+0x0/0x21 returned 0 after 0 usecs
calling configure_trampolines+0x0/0x23 @ 1
initcall configure_trampolines+0x0/0x23 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x61 @ 1
initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
calling dynamic_debug_init+0x0/0x11d @ 1
initcall dynamic_debug_init+0x0/0x11d returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x59 @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x59 returned 0 after 9765 usecs
calling dma_bus_init+0x0/0x3b @ 1
initcall dma_bus_init+0x0/0x3b returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xcb @ 1
initcall dma_channel_table_init+0x0/0xcb returned 0 after 0 usecs
calling pci_arch_init+0x0/0x5f @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x5f returned 0 after 29296 usecs
calling topology_init+0x0/0x87 @ 1
initcall topology_init+0x0/0x87 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x34 @ 1
initcall mtrr_init_finialize+0x0/0x34 returned 0 after 0 usecs
calling init_vdso_vars+0x0/0x203 @ 1
initcall init_vdso_vars+0x0/0x203 returned 0 after 0 usecs
calling sysenter_setup+0x0/0x2bd @ 1
initcall sysenter_setup+0x0/0x2bd returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x28f @ 1
initcall param_sysfs_init+0x0/0x28f returned 0 after 0 usecs
calling pm_sysrq_init+0x0/0x16 @ 1
initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
calling default_bdi_init+0x0/0x9d @ 1
initcall default_bdi_init+0x0/0x9d returned 0 after 0 usecs
calling init_bio+0x0/0xd3 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xd3 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x8a @ 1
initcall fsnotify_notification_init+0x0/0x8a returned 0 after 0 usecs
calling cryptomgr_init+0x0/0xc @ 1
initcall cryptomgr_init+0x0/0xc returned 0 after 0 usecs
calling blk_settings_init+0x0/0x25 @ 1
initcall blk_settings_init+0x0/0x25 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x27 @ 1
initcall blk_ioc_init+0x0/0x27 returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6a @ 1
initcall blk_softirq_init+0x0/0x6a returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x68 @ 1
initcall blk_iopoll_setup+0x0/0x68 returned 0 after 0 usecs
calling genhd_device_init+0x0/0x7b @ 1
initcall genhd_device_init+0x0/0x7b returned 0 after 0 usecs
calling pci_slot_init+0x0/0x42 @ 1
initcall pci_slot_init+0x0/0x42 returned 0 after 0 usecs
calling acpi_init+0x0/0x1c6 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x1c6 returned 0 after 29296 usecs
calling acpi_pci_root_init+0x0/0x27 @ 1
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff]
pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:05:07.0: [10ec:8139] type 0 class 0x000200
pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x40000000-0xfcffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: [1002:5b60] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5b70] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
initcall acpi_pci_root_init+0x0/0x27 returned 0 after 546875 usecs
calling acpi_pci_link_init+0x0/0x3b @ 1
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
initcall acpi_pci_link_init+0x0/0x3b returned 0 after 195312 usecs
calling pnp_init+0x0/0xc @ 1
initcall pnp_init+0x0/0xc returned 0 after 0 usecs
calling regulator_fixed_voltage_init+0x0/0xc @ 1
initcall regulator_fixed_voltage_init+0x0/0xc returned 0 after 0 usecs
calling ad5398_init+0x0/0xe @ 1
initcall ad5398_init+0x0/0xe returned 0 after 0 usecs
calling max8649_init+0x0/0xe @ 1
initcall max8649_init+0x0/0xe returned 0 after 0 usecs
calling max8660_init+0x0/0xe @ 1
initcall max8660_init+0x0/0xe returned 0 after 0 usecs
calling max8998_pmic_init+0x0/0xc @ 1
initcall max8998_pmic_init+0x0/0xc returned 0 after 0 usecs
calling wm8350_regulator_init+0x0/0xc @ 1
initcall wm8350_regulator_init+0x0/0xc returned 0 after 0 usecs
calling tps_65023_init+0x0/0xe @ 1
initcall tps_65023_init+0x0/0xe returned 0 after 0 usecs
calling tps6507x_pmic_init+0x0/0xc @ 1
initcall tps6507x_pmic_init+0x0/0xc returned 0 after 0 usecs
calling misc_init+0x0/0xad @ 1
initcall misc_init+0x0/0xad returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x8b @ 1
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x8b returned 0 after 9765 usecs
calling tc3589x_init+0x0/0xe @ 1
initcall tc3589x_init+0x0/0xe returned 0 after 0 usecs
calling wm8400_module_init+0x0/0x29 @ 1
initcall wm8400_module_init+0x0/0x29 returned 0 after 0 usecs
calling wm8350_i2c_init+0x0/0xe @ 1
initcall wm8350_i2c_init+0x0/0xe returned 0 after 0 usecs
calling tps6105x_init+0x0/0xe @ 1
initcall tps6105x_init+0x0/0xe returned 0 after 0 usecs
calling max8998_i2c_init+0x0/0xe @ 1
initcall max8998_i2c_init+0x0/0xe returned 0 after 0 usecs
calling init_scsi+0x0/0x77 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x77 returned 0 after 0 usecs
calling ata_init+0x0/0x30d @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x30d returned 0 after 0 usecs
calling phy_init+0x0/0x2f @ 1
initcall phy_init+0x0/0x2f returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x33 @ 1
initcall init_pcmcia_cs+0x0/0x33 returned 0 after 0 usecs
calling nop_usb_xceiv_init+0x0/0xc @ 1
initcall nop_usb_xceiv_init+0x0/0xc returned 0 after 0 usecs
calling usb_init+0x0/0x155 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x155 returned 0 after 9765 usecs
calling serio_init+0x0/0x27 @ 1
initcall serio_init+0x0/0x27 returned 0 after 0 usecs
calling gameport_init+0x0/0x27 @ 1
initcall gameport_init+0x0/0x27 returned 0 after 0 usecs
calling input_init+0x0/0x102 @ 1
initcall input_init+0x0/0x102 returned 0 after 0 usecs
calling tca6416_keypad_init+0x0/0xe @ 1
initcall tca6416_keypad_init+0x0/0xe returned 0 after 0 usecs
calling pps_init+0x0/0xa7 @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
initcall pps_init+0x0/0xa7 returned 0 after 9765 usecs
calling power_supply_class_init+0x0/0x3d @ 1
initcall power_supply_class_init+0x0/0x3d returned 0 after 0 usecs
calling acpi_wmi_init+0x0/0x68 @ 1
wmi: Mapper loaded
initcall acpi_wmi_init+0x0/0x68 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x43 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
Expanded resource reserved due to conflict with PCI Bus #00
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000003fff0000 - 000000003fffffff
initcall pci_subsys_init+0x0/0x43 returned 0 after 29296 usecs
calling proto_init+0x0/0xc @ 1
initcall proto_init+0x0/0xc returned 0 after 0 usecs
calling net_dev_init+0x0/0x1c6 @ 1
initcall net_dev_init+0x0/0x1c6 returned 0 after 0 usecs
calling neigh_init+0x0/0x70 @ 1
initcall neigh_init+0x0/0x70 returned 0 after 0 usecs
calling pktsched_init+0x0/0xe2 @ 1
initcall pktsched_init+0x0/0xe2 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x49 @ 1
initcall tc_filter_init+0x0/0x49 returned 0 after 0 usecs
calling tc_action_init+0x0/0x49 @ 1
initcall tc_action_init+0x0/0x49 returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x5b @ 1
initcall cipso_v4_init+0x0/0x5b returned 0 after 0 usecs
calling wanrouter_init+0x0/0x4b @ 1
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
initcall wanrouter_init+0x0/0x4b returned 0 after 0 usecs
calling atm_init+0x0/0xc6 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xc6 returned 0 after 9765 usecs
calling netlbl_init+0x0/0x7e @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x7e returned 0 after 19531 usecs
calling wpan_phy_class_init+0x0/0x3d @ 1
initcall wpan_phy_class_init+0x0/0x3d returned 0 after 0 usecs
calling sysctl_init+0x0/0x49 @ 1
initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs
calling print_ICs+0x0/0x4f4 @ 1
initcall print_ICs+0x0/0x4f4 returned 0 after 0 usecs
calling hpet_late_init+0x0/0xc3 @ 1
initcall hpet_late_init+0x0/0xc3 returned -19 after 0 usecs
calling init_amd_nbs+0x0/0x98 @ 1
initcall init_amd_nbs+0x0/0x98 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x58 @ 1
initcall clocksource_done_booting+0x0/0x58 returned 0 after 0 usecs
calling init_pipe_fs+0x0/0x42 @ 1
initcall init_pipe_fs+0x0/0x42 returned 0 after 0 usecs
calling eventpoll_init+0x0/0xda @ 1
initcall eventpoll_init+0x0/0xda returned 0 after 0 usecs
calling anon_inode_init+0x0/0x124 @ 1
initcall anon_inode_init+0x0/0x124 returned 0 after 0 usecs
calling blk_scsi_ioctl_init+0x0/0x284 @ 1
initcall blk_scsi_ioctl_init+0x0/0x284 returned 0 after 0 usecs
calling acpi_event_init+0x0/0x4f @ 1
initcall acpi_event_init+0x0/0x4f returned 0 after 0 usecs
calling pnp_system_init+0x0/0xc @ 1
initcall pnp_system_init+0x0/0xc returned 0 after 0 usecs
calling pnpacpi_init+0x0/0x89 @ 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x40000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x4000-0x407f]
pnp 00:01: [io 0x4080-0x40ff]
pnp 00:01: [io 0x4400-0x447f]
pnp 00:01: [io 0x4480-0x44ff]
pnp 00:01: [io 0x4800-0x487f]
pnp 00:01: [io 0x4880-0x48ff]
system 00:01: [io 0x4000-0x407f] has been reserved
system 00:01: [io 0x4080-0x40ff] has been reserved
system 00:01: [io 0x4400-0x447f] has been reserved
system 00:01: [io 0x4480-0x44ff] has been reserved
system 00:01: [io 0x4800-0x487f] has been reserved
system 00:01: [io 0x4880-0x48ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0800-0x0805]
pnp 00:02: [io 0x0290-0x0297]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x0805] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077b]
pnp 00:09: [irq 7]
pnp 00:09: [dma 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [io 0x0330-0x0331]
pnp 00:0b: [irq 10]
pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active)
pnp 00:0c: [io 0x0201]
pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x000f0000-0x000f3fff]
pnp 00:0e: [mem 0x000f4000-0x000f7fff]
pnp 00:0e: [mem 0x000f8000-0x000fbfff]
pnp 00:0e: [mem 0x000fc000-0x000fffff]
pnp 00:0e: [mem 0x3fff0000-0x3fffffff]
pnp 00:0e: [mem 0xffff0000-0xffffffff]
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x00100000-0x3ffeffff]
pnp 00:0e: [mem 0xfec00000-0xfec00fff]
pnp 00:0e: [mem 0xfee00000-0xfeefffff]
pnp 00:0e: [mem 0xfefff000-0xfeffffff]
pnp 00:0e: [mem 0xfff80000-0xfff80fff]
pnp 00:0e: [mem 0xfff90000-0xfffbffff]
pnp 00:0e: [mem 0xfffed000-0xfffeffff]
system 00:0e: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:0e: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0e: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0e: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:0e: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0e: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0e: [mem 0xfffed000-0xfffeffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x89 returned 0 after 400390 usecs
calling chr_dev_init+0x0/0xbd @ 1
initcall chr_dev_init+0x0/0xbd returned 0 after 0 usecs
calling firmware_class_init+0x0/0x13 @ 1
initcall firmware_class_init+0x0/0x13 returned 0 after 0 usecs
calling init_pcmcia_bus+0x0/0x5b @ 1
initcall init_pcmcia_bus+0x0/0x5b returned 0 after 0 usecs
calling cpufreq_gov_performance_init+0x0/0xc @ 1
initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 usecs
calling cpufreq_gov_dbs_init+0x0/0xc @ 1
initcall cpufreq_gov_dbs_init+0x0/0xc returned 0 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xd6 @ 1
Switching to clocksource acpi_pm
initcall init_acpi_pm_clocksource+0x0/0xd6 returned 0 after 9770 usecs
calling ssb_modinit+0x0/0x4b @ 1
initcall ssb_modinit+0x0/0x4b returned 0 after 11 usecs
calling pcibios_assign_resources+0x0/0x6a @ 1
pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff])
pci 0000:00:09.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem disabled]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x40000000-0xfcffffffff]
pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x40000000-0xfcffffffff]
pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0x6a returned 0 after 190843 usecs
calling sysctl_core_init+0x0/0x34 @ 1
initcall sysctl_core_init+0x0/0x34 returned 0 after 17 usecs
calling inet_init+0x0/0x239 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
IPv4 FIB: Using LC-trie version 0.409
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
initcall inet_init+0x0/0x239 returned 0 after 42368 usecs
calling af_unix_init+0x0/0x4b @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4b returned 0 after 2993 usecs
calling pci_apply_final_quirks+0x0/0xec @ 1
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
initcall pci_apply_final_quirks+0x0/0xec returned 0 after 36696 usecs
calling populate_rootfs+0x0/0xc8 @ 1
initcall populate_rootfs+0x0/0xc8 returned 0 after 63 usecs
calling pci_iommu_init+0x0/0x4d @ 1
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
initcall pci_iommu_init+0x0/0x4d returned 0 after 12883 usecs
calling i8259A_init_ops+0x0/0x1e @ 1
initcall i8259A_init_ops+0x0/0x1e returned 0 after 1 usecs
calling vsyscall_init+0x0/0x65 @ 1
initcall vsyscall_init+0x0/0x65 returned 0 after 18 usecs
calling sbf_init+0x0/0xe2 @ 1
initcall sbf_init+0x0/0xe2 returned 0 after 1 usecs
calling init_tsc_clocksource+0x0/0x5c @ 1
initcall init_tsc_clocksource+0x0/0x5c returned 0 after 21 usecs
calling add_rtc_cmos+0x0/0x92 @ 1
initcall add_rtc_cmos+0x0/0x92 returned 0 after 4 usecs
calling i8237A_init_ops+0x0/0x11 @ 1
initcall i8237A_init_ops+0x0/0x11 returned 0 after 1 usecs
calling cache_sysfs_init+0x0/0x5c @ 1
initcall cache_sysfs_init+0x0/0x5c returned 0 after 103 usecs
calling ioapic_init_ops+0x0/0x4a @ 1
initcall ioapic_init_ops+0x0/0x4a returned 0 after 2 usecs
calling add_pcspkr+0x0/0x37 @ 1
initcall add_pcspkr+0x0/0x37 returned 0 after 26 usecs
calling start_periodic_check_for_corruption+0x0/0x3d @ 1
initcall start_periodic_check_for_corruption+0x0/0x3d returned 0 after 1 usecs
calling crypto_fpu_module_init+0x0/0xc @ 1
initcall crypto_fpu_module_init+0x0/0xc returned 0 after 2 usecs
calling aes_init+0x0/0xc @ 1
initcall aes_init+0x0/0xc returned 0 after 37 usecs
calling init+0x0/0xc @ 1
initcall init+0x0/0xc returned 0 after 50 usecs
calling aesni_init+0x0/0x181 @ 1
Intel AES-NI instructions are not detected.
initcall aesni_init+0x0/0x181 returned -19 after 3825 usecs
calling ghash_pclmulqdqni_mod_init+0x0/0x55 @ 1
Intel PCLMULQDQ-NI instructions are not detected.
initcall ghash_pclmulqdqni_mod_init+0x0/0x55 returned -19 after 4340 usecs
calling ia32_binfmt_init+0x0/0x11 @ 1
initcall ia32_binfmt_init+0x0/0x11 returned 0 after 4 usecs
calling proc_execdomains_init+0x0/0x1f @ 1
initcall proc_execdomains_init+0x0/0x1f returned 0 after 7 usecs
calling ioresources_init+0x0/0x39 @ 1
initcall ioresources_init+0x0/0x39 returned 0 after 6 usecs
calling uid_cache_init+0x0/0x89 @ 1
initcall uid_cache_init+0x0/0x89 returned 0 after 9 usecs
calling init_posix_timers+0x0/0x1e0 @ 1
initcall init_posix_timers+0x0/0x1e0 returned 0 after 26 usecs
calling init_posix_cpu_timers+0x0/0xc5 @ 1
initcall init_posix_cpu_timers+0x0/0xc5 returned 0 after 1 usecs
calling nsproxy_cache_init+0x0/0x2a @ 1
initcall nsproxy_cache_init+0x0/0x2a returned 0 after 1 usecs
calling timekeeping_init_ops+0x0/0x11 @ 1
initcall timekeeping_init_ops+0x0/0x11 returned 0 after 1 usecs
calling init_clocksource_sysfs+0x0/0x4e @ 1
initcall init_clocksource_sysfs+0x0/0x4e returned 0 after 19 usecs
calling init_timer_list_procfs+0x0/0x29 @ 1
initcall init_timer_list_procfs+0x0/0x29 returned 0 after 2 usecs
calling futex_init+0x0/0x5f @ 1
initcall futex_init+0x0/0x5f returned 0 after 8 usecs
calling proc_dma_init+0x0/0x1f @ 1
initcall proc_dma_init+0x0/0x1f returned 0 after 2 usecs
calling kallsyms_init+0x0/0x22 @ 1
initcall kallsyms_init+0x0/0x22 returned 0 after 2 usecs
calling pid_namespaces_init+0x0/0x2a @ 1
initcall pid_namespaces_init+0x0/0x2a returned 0 after 6 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 12 usecs
calling perf_event_sysfs_init+0x0/0x93 @ 1
initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 57 usecs
calling init_per_zone_wmark_min+0x0/0x68 @ 1
initcall init_per_zone_wmark_min+0x0/0x68 returned 0 after 36 usecs
calling kswapd_init+0x0/0x69 @ 1
initcall kswapd_init+0x0/0x69 returned 0 after 31 usecs
calling extfrag_debug_init+0x0/0x70 @ 1
initcall extfrag_debug_init+0x0/0x70 returned 0 after 14 usecs
calling setup_vmstat+0x0/0xbd @ 1
initcall setup_vmstat+0x0/0xbd returned 0 after 15 usecs
calling mm_sysfs_init+0x0/0x26 @ 1
initcall mm_sysfs_init+0x0/0x26 returned 0 after 4 usecs
calling proc_vmalloc_init+0x0/0x22 @ 1
initcall proc_vmalloc_init+0x0/0x22 returned 0 after 3 usecs
calling procswaps_init+0x0/0x20 @ 1
initcall procswaps_init+0x0/0x20 returned 0 after 3 usecs
calling slab_proc_init+0x0/0x22 @ 1
initcall slab_proc_init+0x0/0x22 returned 0 after 3 usecs
calling slab_sysfs_init+0x0/0x104 @ 1
initcall slab_sysfs_init+0x0/0x104 returned 0 after 2666 usecs
calling hugepage_init+0x0/0x129 @ 1
initcall hugepage_init+0x0/0x129 returned 0 after 108 usecs
calling fcntl_init+0x0/0x27 @ 1
initcall fcntl_init+0x0/0x27 returned 0 after 23 usecs
calling proc_filesystems_init+0x0/0x1f @ 1
initcall proc_filesystems_init+0x0/0x1f returned 0 after 5 usecs
calling fsnotify_mark_init+0x0/0x3d @ 1
initcall fsnotify_mark_init+0x0/0x3d returned 0 after 25 usecs
calling fanotify_user_setup+0x0/0x4f @ 1
initcall fanotify_user_setup+0x0/0x4f returned 0 after 12 usecs
calling aio_setup+0x0/0x99 @ 1
initcall aio_setup+0x0/0x99 returned 0 after 64 usecs
calling proc_locks_init+0x0/0x1f @ 1
initcall proc_locks_init+0x0/0x1f returned 0 after 4 usecs
calling init_sys32_ioctl+0x0/0x25 @ 1
initcall init_sys32_ioctl+0x0/0x25 returned 0 after 74 usecs
calling init_mbcache+0x0/0x11 @ 1
initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
calling dquot_init+0x0/0x10e @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x10e returned 0 after 7661 usecs
calling init_v1_quota_format+0x0/0xc @ 1
initcall init_v1_quota_format+0x0/0xc returned 0 after 1 usecs
calling quota_init+0x0/0x23 @ 1
initcall quota_init+0x0/0x23 returned 0 after 7 usecs
calling proc_cmdline_init+0x0/0x1f @ 1
initcall proc_cmdline_init+0x0/0x1f returned 0 after 3 usecs
calling proc_consoles_init+0x0/0x1f @ 1
initcall proc_consoles_init+0x0/0x1f returned 0 after 2 usecs
calling proc_cpuinfo_init+0x0/0x1f @ 1
initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 2 usecs
calling proc_devices_init+0x0/0x1f @ 1
initcall proc_devices_init+0x0/0x1f returned 0 after 2 usecs
calling proc_interrupts_init+0x0/0x1f @ 1
initcall proc_interrupts_init+0x0/0x1f returned 0 after 2 usecs
calling proc_loadavg_init+0x0/0x1f @ 1
initcall proc_loadavg_init+0x0/0x1f returned 0 after 2 usecs
calling proc_meminfo_init+0x0/0x1f @ 1
initcall proc_meminfo_init+0x0/0x1f returned 0 after 2 usecs
calling proc_stat_init+0x0/0x21 @ 1
initcall proc_stat_init+0x0/0x21 returned 0 after 3 usecs
calling proc_uptime_init+0x0/0x1f @ 1
initcall proc_uptime_init+0x0/0x1f returned 0 after 2 usecs
calling proc_version_init+0x0/0x1f @ 1
initcall proc_version_init+0x0/0x1f returned 0 after 2 usecs
calling proc_softirqs_init+0x0/0x1f @ 1
initcall proc_softirqs_init+0x0/0x1f returned 0 after 2 usecs
calling vmcore_init+0x0/0x4bd @ 1
initcall vmcore_init+0x0/0x4bd returned 0 after 1 usecs
calling proc_kmsg_init+0x0/0x23 @ 1
initcall proc_kmsg_init+0x0/0x23 returned 0 after 3 usecs
calling proc_page_init+0x0/0x3f @ 1
initcall proc_page_init+0x0/0x3f returned 0 after 6 usecs
calling configfs_init+0x0/0xa9 @ 1
initcall configfs_init+0x0/0xa9 returned 0 after 59 usecs
calling init_devpts_fs+0x0/0x42 @ 1
initcall init_devpts_fs+0x0/0x42 returned 0 after 18 usecs
calling init_dlm+0x0/0x7e @ 1
DLM (built Mar 29 2011 13:23:27) installed
initcall init_dlm+0x0/0x7e returned 0 after 3902 usecs
calling init_reiserfs_fs+0x0/0x57 @ 1
initcall init_reiserfs_fs+0x0/0x57 returned 0 after 48 usecs
calling init_ext3_fs+0x0/0x79 @ 1
initcall init_ext3_fs+0x0/0x79 returned 0 after 96 usecs
calling init_ext2_fs+0x0/0x57 @ 1
initcall init_ext2_fs+0x0/0x57 returned 0 after 47 usecs
calling ext4_init_fs+0x0/0x1ee @ 1
initcall ext4_init_fs+0x0/0x1ee returned 0 after 272 usecs
calling journal_init+0x0/0x8d @ 1
initcall journal_init+0x0/0x8d returned 0 after 150 usecs
calling journal_init+0x0/0x13d @ 1
initcall journal_init+0x0/0x13d returned 0 after 32 usecs
calling init_squashfs_fs+0x0/0x63 @ 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
initcall init_squashfs_fs+0x0/0x63 returned 0 after 4503 usecs
calling init_ramfs_fs+0x0/0xc @ 1
initcall init_ramfs_fs+0x0/0xc returned 0 after 2 usecs
calling init_fat_fs+0x0/0x45 @ 1
initcall init_fat_fs+0x0/0x45 returned 0 after 93 usecs
calling init_vfat_fs+0x0/0xc @ 1
initcall init_vfat_fs+0x0/0xc returned 0 after 2 usecs
calling init_msdos_fs+0x0/0xc @ 1
initcall init_msdos_fs+0x0/0xc returned 0 after 1 usecs
calling init_bfs_fs+0x0/0x57 @ 1
initcall init_bfs_fs+0x0/0x57 returned 0 after 47 usecs
calling init_hfsplus_fs+0x0/0x53 @ 1
initcall init_hfsplus_fs+0x0/0x53 returned 0 after 46 usecs
calling vxfs_init+0x0/0x4f @ 1
initcall vxfs_init+0x0/0x4f returned 0 after 51 usecs
calling init_nls_cp737+0x0/0xc @ 1
initcall init_nls_cp737+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp775+0x0/0xc @ 1
initcall init_nls_cp775+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp850+0x0/0xc @ 1
initcall init_nls_cp850+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp852+0x0/0xc @ 1
initcall init_nls_cp852+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp860+0x0/0xc @ 1
initcall init_nls_cp860+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp864+0x0/0xc @ 1
initcall init_nls_cp864+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp865+0x0/0xc @ 1
initcall init_nls_cp865+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp869+0x0/0xc @ 1
initcall init_nls_cp869+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp949+0x0/0xc @ 1
initcall init_nls_cp949+0x0/0xc returned 0 after 1 usecs
calling init_nls_cp950+0x0/0xc @ 1
initcall init_nls_cp950+0x0/0xc returned 0 after 1 usecs
calling init_nls_iso8859_2+0x0/0xc @ 1
initcall init_nls_iso8859_2+0x0/0xc returned 0 after 1 usecs
calling init_nls_iso8859_4+0x0/0xc @ 1
initcall init_nls_iso8859_4+0x0/0xc returned 0 after 1 usecs
calling init_nls_iso8859_9+0x0/0xc @ 1
initcall init_nls_iso8859_9+0x0/0xc returned 0 after 1 usecs
calling init_nls_iso8859_13+0x0/0xc @ 1
initcall init_nls_iso8859_13+0x0/0xc returned 0 after 1 usecs
calling init_nls_iso8859_14+0x0/0xc @ 1
initcall init_nls_iso8859_14+0x0/0xc returned 0 after 1 usecs
calling init_nls_koi8_r+0x0/0xc @ 1
initcall init_nls_koi8_r+0x0/0xc returned 0 after 1 usecs
calling init_nls_utf8+0x0/0x1f @ 1
initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs
calling init_sysv_fs+0x0/0x45 @ 1
initcall init_sysv_fs+0x0/0x45 returned 0 after 48 usecs
calling init_ufs_fs+0x0/0x57 @ 1
initcall init_ufs_fs+0x0/0x57 returned 0 after 46 usecs
calling init_efs_fs+0x0/0x65 @ 1
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
initcall init_efs_fs+0x0/0x65 returned 0 after 3626 usecs
calling logfs_init+0x0/0x58 @ 1
initcall logfs_init+0x0/0x58 returned 0 after 73 usecs
calling init_udf_fs+0x0/0x57 @ 1
initcall init_udf_fs+0x0/0x57 returned 0 after 46 usecs
calling init_jfs_fs+0x0/0x1bc @ 1
JFS: nTxBlock = 7948, nTxLock = 63584
initcall init_jfs_fs+0x0/0x1bc returned 0 after 6943 usecs
calling init_xfs_fs+0x0/0xb9 @ 1
SGI XFS with security attributes, large block/inode numbers, debug enabled
initcall init_xfs_fs+0x0/0xb9 returned 0 after 7192 usecs
calling init_befs_fs+0x0/0x80 @ 1
BeFS version: 0.9.3
initcall init_befs_fs+0x0/0x80 returned 0 after 1860 usecs
calling ocfs2_init+0x0/0x3e0 @ 1
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x3e0 returned 0 after 1270 usecs
calling ocfs2_stack_glue_init+0x0/0x8b @ 1
initcall ocfs2_stack_glue_init+0x0/0x8b returned 0 after 14 usecs
calling o2cb_stack_init+0x0/0xc @ 1
ocfs2: Registered cluster interface o2cb
initcall o2cb_stack_init+0x0/0xc returned 0 after 3578 usecs
calling init_dlmfs_fs+0x0/0xda @ 1
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
initcall init_dlmfs_fs+0x0/0xda returned 0 after 5120 usecs
calling init_o2nm+0x0/0x9f @ 1
OCFS2 Node Manager 1.5.0
initcall init_o2nm+0x0/0x9f returned 0 after 2335 usecs
calling dlm_init+0x0/0x384 @ 1
OCFS2 DLM 1.5.0
initcall dlm_init+0x0/0x384 returned 0 after 1491 usecs
calling init_pstore_fs+0x0/0xc @ 1
initcall init_pstore_fs+0x0/0xc returned 0 after 3 usecs
calling ipc_init+0x0/0x2c @ 1
msgmni has been set to 1987
initcall ipc_init+0x0/0x2c returned 0 after 2483 usecs
calling ipc_sysctl_init+0x0/0x11 @ 1
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 27 usecs
calling init_mqueue_fs+0x0/0xaa @ 1
initcall init_mqueue_fs+0x0/0xaa returned 0 after 89 usecs
calling crypto_wq_init+0x0/0x2e @ 1
initcall crypto_wq_init+0x0/0x2e returned 0 after 27 usecs
calling crypto_algapi_init+0x0/0xa @ 1
initcall crypto_algapi_init+0x0/0xa returned 0 after 7 usecs
calling skcipher_module_init+0x0/0x34 @ 1
initcall skcipher_module_init+0x0/0x34 returned 0 after 1 usecs
calling chainiv_module_init+0x0/0xc @ 1
initcall chainiv_module_init+0x0/0xc returned 0 after 1 usecs
calling eseqiv_module_init+0x0/0xc @ 1
initcall eseqiv_module_init+0x0/0xc returned 0 after 1 usecs
calling seqiv_module_init+0x0/0xc @ 1
initcall seqiv_module_init+0x0/0xc returned 0 after 1 usecs
calling hmac_module_init+0x0/0xc @ 1
initcall hmac_module_init+0x0/0xc returned 0 after 1 usecs
calling vmac_module_init+0x0/0xc @ 1
initcall vmac_module_init+0x0/0xc returned 0 after 1 usecs
calling crypto_xcbc_module_init+0x0/0xc @ 1
initcall crypto_xcbc_module_init+0x0/0xc returned 0 after 1 usecs
calling crypto_null_mod_init+0x0/0x71 @ 1
initcall crypto_null_mod_init+0x0/0x71 returned 0 after 110 usecs
calling md4_mod_init+0x0/0xc @ 1
initcall md4_mod_init+0x0/0xc returned 0 after 30 usecs
calling md5_mod_init+0x0/0xc @ 1
initcall md5_mod_init+0x0/0xc returned 0 after 31 usecs
calling rmd128_mod_init+0x0/0xc @ 1
initcall rmd128_mod_init+0x0/0xc returned 0 after 31 usecs
calling rmd256_mod_init+0x0/0xc @ 1
initcall rmd256_mod_init+0x0/0xc returned 0 after 31 usecs
calling sha1_generic_mod_init+0x0/0xc @ 1
initcall sha1_generic_mod_init+0x0/0xc returned 0 after 31 usecs
calling sha256_generic_mod_init+0x0/0x35 @ 1
initcall sha256_generic_mod_init+0x0/0x35 returned 0 after 54 usecs
calling sha512_generic_mod_init+0x0/0x35 @ 1
initcall sha512_generic_mod_init+0x0/0x35 returned 0 after 57 usecs
calling tgr192_mod_init+0x0/0x5a @ 1
initcall tgr192_mod_init+0x0/0x5a returned 0 after 80 usecs
calling crypto_cbc_module_init+0x0/0xc @ 1
initcall crypto_cbc_module_init+0x0/0xc returned 0 after 2 usecs
calling crypto_pcbc_module_init+0x0/0xc @ 1
initcall crypto_pcbc_module_init+0x0/0xc returned 0 after 1 usecs
calling crypto_cts_module_init+0x0/0xc @ 1
initcall crypto_cts_module_init+0x0/0xc returned 0 after 1 usecs
calling cryptd_init+0x0/0xac @ 1
initcall cryptd_init+0x0/0xac returned 0 after 4 usecs
calling des_generic_mod_init+0x0/0x35 @ 1
initcall des_generic_mod_init+0x0/0x35 returned 0 after 55 usecs
calling blowfish_mod_init+0x0/0xc @ 1
initcall blowfish_mod_init+0x0/0xc returned 0 after 28 usecs
calling aes_init+0x0/0xc @ 1
initcall aes_init+0x0/0xc returned 0 after 30 usecs
calling camellia_init+0x0/0xc @ 1
initcall camellia_init+0x0/0xc returned 0 after 28 usecs
calling cast6_mod_init+0x0/0xc @ 1
initcall cast6_mod_init+0x0/0xc returned 0 after 30 usecs
calling arc4_init+0x0/0xc @ 1
initcall arc4_init+0x0/0xc returned 0 after 29 usecs
calling tea_mod_init+0x0/0x5a @ 1
initcall tea_mod_init+0x0/0x5a returned 0 after 84 usecs
calling anubis_mod_init+0x0/0xc @ 1
initcall anubis_mod_init+0x0/0xc returned 0 after 30 usecs
calling deflate_mod_init+0x0/0xc @ 1
initcall deflate_mod_init+0x0/0xc returned 0 after 30 usecs
calling zlib_mod_init+0x0/0xc @ 1
initcall zlib_mod_init+0x0/0xc returned 0 after 29 usecs
calling michael_mic_init+0x0/0xc @ 1
initcall michael_mic_init+0x0/0xc returned 0 after 29 usecs
calling crc32c_mod_init+0x0/0xc @ 1
initcall crc32c_mod_init+0x0/0xc returned 0 after 30 usecs
calling crypto_authenc_module_init+0x0/0xc @ 1
initcall crypto_authenc_module_init+0x0/0xc returned 0 after 1 usecs
calling crypto_authenc_esn_module_init+0x0/0xc @ 1
initcall crypto_authenc_esn_module_init+0x0/0xc returned 0 after 1 usecs
calling lzo_mod_init+0x0/0xc @ 1
initcall lzo_mod_init+0x0/0xc returned 0 after 29 usecs
calling krng_mod_init+0x0/0xc @ 1
initcall krng_mod_init+0x0/0xc returned 0 after 29 usecs
calling prng_mod_init+0x0/0xc @ 1
initcall prng_mod_init+0x0/0xc returned 0 after 31 usecs
calling af_alg_init+0x0/0x3f @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3f returned 0 after 3063 usecs
calling algif_skcipher_init+0x0/0xc @ 1
initcall algif_skcipher_init+0x0/0xc returned 0 after 1 usecs
calling proc_genhd_init+0x0/0x3a @ 1
initcall proc_genhd_init+0x0/0x3a returned 0 after 5 usecs
calling bsg_init+0x0/0x12b @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x12b returned 0 after 6025 usecs
calling noop_init+0x0/0x11 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x11 returned 0 after 2565 usecs
calling cfq_init+0x0/0x9d @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x9d returned 0 after 3392 usecs
calling btree_module_init+0x0/0x27 @ 1
initcall btree_module_init+0x0/0x27 returned 0 after 9 usecs
calling libcrc32c_mod_init+0x0/0x27 @ 1
initcall libcrc32c_mod_init+0x0/0x27 returned 0 after 3 usecs
calling percpu_counter_startup+0x0/0x16 @ 1
initcall percpu_counter_startup+0x0/0x16 returned 0 after 3 usecs
calling dynamic_debug_init_debugfs+0x0/0x5f @ 1
initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 7 usecs
calling pci_proc_init+0x0/0x60 @ 1
initcall pci_proc_init+0x0/0x60 returned 0 after 54 usecs
calling pcie_portdrv_init+0x0/0x6d @ 1
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x6d returned 0 after 17999 usecs
calling aer_service_init+0x0/0x6 @ 1
initcall aer_service_init+0x0/0x6 returned -6 after 1 usecs
initcall aer_service_init+0x0/0x6 returned with error code -6
calling aer_inject_init+0x0/0xc @ 1
initcall aer_inject_init+0x0/0xc returned 0 after 47 usecs
calling ioapic_init+0x0/0x15 @ 1
initcall ioapic_init+0x0/0x15 returned 0 after 16 usecs
calling display_class_init+0x0/0x7b @ 1
initcall display_class_init+0x0/0x7b returned 0 after 16 usecs
calling i7300_idle_init+0x0/0x5cf @ 1
initcall i7300_idle_init+0x0/0x5cf returned -19 after 19 usecs
calling acpi_reserve_resources+0x0/0xe8 @ 1
initcall acpi_reserve_resources+0x0/0xe8 returned 0 after 6 usecs
calling irqrouter_init_ops+0x0/0x25 @ 1
initcall irqrouter_init_ops+0x0/0x25 returned 0 after 1 usecs
calling acpi_ac_init+0x0/0x47 @ 1
initcall acpi_ac_init+0x0/0x47 returned 0 after 60 usecs
calling acpi_button_init+0x0/0xc @ 1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0xc returned 0 after 17423 usecs
calling acpi_container_init+0x0/0x4b @ 1
initcall acpi_container_init+0x0/0x4b returned 0 after 4854 usecs
calling acpi_hed_init+0x0/0x23 @ 1
initcall acpi_hed_init+0x0/0x23 returned 0 after 22 usecs
calling acpi_ec_sys_init+0x0/0x19 @ 1
initcall acpi_ec_sys_init+0x0/0x19 returned -19 after 1 usecs
calling acpi_ipmi_init+0x0/0x37 @ 1
initcall acpi_ipmi_init+0x0/0x37 returned 0 after 2 usecs
calling bq24022_init+0x0/0x13 @ 1
initcall bq24022_init+0x0/0x13 returned -19 after 21 usecs
calling pty_init+0x0/0x428 @ 1
initcall pty_init+0x0/0x428 returned 0 after 20703 usecs
calling sysrq_init+0x0/0x43 @ 1
initcall sysrq_init+0x0/0x43 returned 0 after 16 usecs
calling r3964_init+0x0/0x3a @ 1
r3964: Philips r3964 Driver $Revision: 1.10 $
initcall r3964_init+0x0/0x3a returned 0 after 3995 usecs
calling serial8250_init+0x0/0x188 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall serial8250_init+0x0/0x188 returned 0 after 296539 usecs
calling serial8250_pnp_init+0x0/0xc @ 1
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall serial8250_pnp_init+0x0/0xc returned 0 after 98293 usecs
calling serial8250_pci_init+0x0/0x15 @ 1
initcall serial8250_pci_init+0x0/0x15 returned 0 after 54 usecs
calling init_serial_cs+0x0/0xc @ 1
initcall init_serial_cs+0x0/0xc returned 0 after 34 usecs
calling jsm_init_module+0x0/0x46 @ 1
initcall jsm_init_module+0x0/0x46 returned 0 after 33 usecs
calling moxa_init+0x0/0x22e @ 1
MOXA Intellio family driver version 6.0k
initcall moxa_init+0x0/0x22e returned 0 after 13264 usecs
calling mxser_module_init+0x0/0x607 @ 1
MOXA Smartio/Industio family driver version 2.0.5
initcall mxser_module_init+0x0/0x607 returned 0 after 4366 usecs
calling nozomi_init+0x0/0x11f @ 1
Initializing Nozomi driver 2.1d (build date: Mar 29 2011 13:23:42)
initcall nozomi_init+0x0/0x11f returned 0 after 5787 usecs
calling slgt_init+0x0/0x1b7 @ 1
SyncLink GT
SyncLink GT, tty major#250
SyncLink GT no devices found
initcall slgt_init+0x0/0x1b7 returned 0 after 6093 usecs
calling synclinkmp_init+0x0/0x17d @ 1
SyncLink MultiPort driver $Revision: 4.38 $
SyncLink MultiPort driver $Revision: 4.38 $, tty major#249
initcall synclinkmp_init+0x0/0x17d returned 0 after 20844 usecs
calling rand_initialize+0x0/0x2b @ 1
initcall rand_initialize+0x0/0x2b returned 0 after 25 usecs
calling raw_init+0x0/0xdb @ 1
initcall raw_init+0x0/0xdb returned 0 after 73 usecs
calling applicom_init+0x0/0x4c1 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x4c1 returned -6 after 13788 usecs
initcall applicom_init+0x0/0x4c1 returned with error code -6
calling rtc_init+0x0/0xb7 @ 1
Real Time Clock Driver v1.12b
initcall rtc_init+0x0/0xb7 returned 0 after 2717 usecs
calling hpet_init+0x0/0x60 @ 1
initcall hpet_init+0x0/0x60 returned 0 after 89 usecs
calling nvram_init+0x0/0x78 @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x78 returned 0 after 2859 usecs
calling mod_init+0x0/0xb3 @ 1
initcall mod_init+0x0/0xb3 returned -19 after 20 usecs
calling mod_init+0x0/0x49 @ 1
initcall mod_init+0x0/0x49 returned -19 after 1 usecs
calling tlclk_init+0x0/0x1e2 @ 1
telclk_interrup = 0xf non-mcpbl0010 hw.
initcall tlclk_init+0x0/0x1e2 returned -6 after 3506 usecs
initcall tlclk_init+0x0/0x1e2 returned with error code -6
calling mwave_init+0x0/0x1de @ 1
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
initcall mwave_init+0x0/0x1de returned -5 after 22184 usecs
initcall mwave_init+0x0/0x1de returned with error code -5
calling cmm_init+0x0/0xba @ 1
initcall cmm_init+0x0/0xba returned 0 after 22 usecs
calling ipmi_init_msghandler_mod+0x0/0xb @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xb returned 0 after 3000 usecs
calling init_ipmi_devintf+0x0/0xfe @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0xfe returned 0 after 1973 usecs
calling init_ipmi_si+0x0/0x946 @ 1
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x946 returned -19 after 126131 usecs
calling ipmi_wdog_init+0x0/0x123 @ 1
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x123 returned 0 after 2987 usecs
calling init_tis+0x0/0x9b @ 1
initcall init_tis+0x0/0x9b returned 0 after 20 usecs
calling init_nsc+0x0/0x4e5 @ 1
initcall init_nsc+0x0/0x4e5 returned -19 after 12 usecs
calling init_atmel+0x0/0x189 @ 1
initcall init_atmel+0x0/0x189 returned -19 after 20 usecs
calling init_inf+0x0/0xc @ 1
initcall init_inf+0x0/0xc returned 0 after 13 usecs
calling ramoops_init+0x0/0x13 @ 1
initcall ramoops_init+0x0/0x13 returned -19 after 15 usecs
calling topology_sysfs_init+0x0/0x5a @ 1
initcall topology_sysfs_init+0x0/0x5a returned 0 after 15 usecs
calling brd_init+0x0/0x18d @ 1
brd: module loaded
initcall brd_init+0x0/0x18d returned 0 after 2766 usecs
calling loop_init+0x0/0x197 @ 1
loop: module loaded
initcall loop_init+0x0/0x197 returned 0 after 2319 usecs
calling cpqarray_init+0x0/0x251 @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x251 returned -19 after 2752 usecs
calling cciss_init+0x0/0x95 @ 1
HP CISS Driver (v 3.6.26)
initcall cciss_init+0x0/0x95 returned 0 after 2360 usecs
calling init_cryptoloop+0x0/0x25 @ 1
initcall init_cryptoloop+0x0/0x25 returned 0 after 1 usecs
calling carm_init+0x0/0x15 @ 1
initcall carm_init+0x0/0x15 returned 0 after 13 usecs
calling ibmasm_init+0x0/0x5a @ 1
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
initcall ibmasm_init+0x0/0x5a returned 0 after 5205 usecs
calling ad_dpot_i2c_init+0x0/0xe @ 1
initcall ad_dpot_i2c_init+0x0/0xe returned 0 after 12 usecs
calling bmp085_init+0x0/0xe @ 1
initcall bmp085_init+0x0/0xe returned 0 after 9 usecs
calling ics932s401_init+0x0/0xe @ 1
initcall ics932s401_init+0x0/0xe returned 0 after 9 usecs
calling lkdtm_module_init+0x0/0x1a0 @ 1
lkdtm: No crash points registered, enable through debugfs
initcall lkdtm_module_init+0x0/0x1a0 returned 0 after 5020 usecs
calling phantom_init+0x0/0x109 @ 1
Phantom Linux Driver, version n0.9.8, init OK
initcall phantom_init+0x0/0x109 returned 0 after 4028 usecs
calling bh1780_init+0x0/0xe @ 1
initcall bh1780_init+0x0/0xe returned 0 after 9 usecs
calling bh1770_init+0x0/0xe @ 1
initcall bh1770_init+0x0/0xe returned 0 after 9 usecs
calling ioc4_init+0x0/0x15 @ 1
initcall ioc4_init+0x0/0x15 returned 0 after 13 usecs
calling isl29003_init+0x0/0xe @ 1
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
initcall isl29003_init+0x0/0xe returned 0 after 9616 usecs
calling sensor_isl29020_init+0x0/0xe @ 1
initcall sensor_isl29020_init+0x0/0xe returned 0 after 9 usecs
calling ds1682_init+0x0/0xe @ 1
initcall ds1682_init+0x0/0xe returned 0 after 9 usecs
calling c2port_init+0x0/0x4f @ 1
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
initcall c2port_init+0x0/0x4f returned 0 after 5788 usecs
calling sensor_hmc6352_init+0x0/0xe @ 1
initcall sensor_hmc6352_init+0x0/0xe returned 0 after 12 usecs
calling eeprom_init+0x0/0xe @ 1
initcall eeprom_init+0x0/0xe returned 0 after 9 usecs
calling max6875_init+0x0/0xe @ 1
initcall max6875_init+0x0/0xe returned 0 after 9 usecs
calling cb710_init_module+0x0/0x15 @ 1
initcall cb710_init_module+0x0/0x15 returned 0 after 13 usecs
calling pch_phub_pci_init+0x0/0x15 @ 1
initcall pch_phub_pci_init+0x0/0x15 returned 0 after 13 usecs
calling lis3lv02d_init+0x0/0xe @ 1
initcall lis3lv02d_init+0x0/0xe returned 0 after 10 usecs
calling lpc_sch_init+0x0/0x15 @ 1
initcall lpc_sch_init+0x0/0x15 returned 0 after 13 usecs
calling rdc321x_sb_init+0x0/0x15 @ 1
initcall rdc321x_sb_init+0x0/0x15 returned 0 after 15 usecs
calling cmodio_init+0x0/0x15 @ 1
initcall cmodio_init+0x0/0x15 returned 0 after 13 usecs
calling pn544_init+0x0/0x4c @ 1
initcall pn544_init+0x0/0x4c returned 0 after 9 usecs
calling spi_transport_init+0x0/0x75 @ 1
initcall spi_transport_init+0x0/0x75 returned 0 after 20 usecs
calling fc_transport_init+0x0/0x8f @ 1
initcall fc_transport_init+0x0/0x8f returned 0 after 27 usecs
calling iscsi_transport_init+0x0/0x141 @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x141 returned 0 after 3565 usecs
calling sas_transport_init+0x0/0xd5 @ 1
initcall sas_transport_init+0x0/0xd5 returned 0 after 51 usecs
calling sas_class_init+0x0/0x2e @ 1
initcall sas_class_init+0x0/0x2e returned 0 after 35 usecs
calling ahc_linux_init+0x0/0x62 @ 1
initcall ahc_linux_init+0x0/0x62 returned 0 after 36 usecs
calling init_sd+0x0/0x126 @ 1
initcall init_sd+0x0/0x126 returned 0 after 34 usecs
calling init_sg+0x0/0xca @ 1
initcall init_sg+0x0/0xca returned 0 after 12 usecs
calling ahci_init+0x0/0x15 @ 1
initcall ahci_init+0x0/0x15 returned 0 after 36 usecs
calling acard_ahci_init+0x0/0x15 @ 1
initcall acard_ahci_init+0x0/0x15 returned 0 after 13 usecs
calling ahci_init+0x0/0x13 @ 1
initcall ahci_init+0x0/0x13 returned -19 after 18 usecs
calling inic_init+0x0/0x15 @ 1
initcall inic_init+0x0/0x15 returned 0 after 13 usecs
calling qs_ata_init+0x0/0x15 @ 1
initcall qs_ata_init+0x0/0x15 returned 0 after 17 usecs
calling piix_init+0x0/0x26 @ 1
initcall piix_init+0x0/0x26 returned 0 after 23 usecs
calling mv_init+0x0/0x46 @ 1
initcall mv_init+0x0/0x46 returned 0 after 24 usecs
calling nv_init+0x0/0x15 @ 1
initcall nv_init+0x0/0x15 returned 0 after 16 usecs
calling pdc_ata_init+0x0/0x15 @ 1
initcall pdc_ata_init+0x0/0x15 returned 0 after 16 usecs
calling sil_init+0x0/0x15 @ 1
initcall sil_init+0x0/0x15 returned 0 after 14 usecs
calling vsc_sata_init+0x0/0x15 @ 1
initcall vsc_sata_init+0x0/0x15 returned 0 after 14 usecs
calling amd_init+0x0/0x15 @ 1
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
initcall amd_init+0x0/0x15 returned 0 after 23531 usecs
calling 1_async_port_probe+0x0/0x46 @ 5
calling 2_async_port_probe+0x0/0x46 @ 79
async_waiting @ 79
calling artop_init+0x0/0x15 @ 1
initcall artop_init+0x0/0x15 returned 0 after 20 usecs
calling cmd64x_init+0x0/0x15 @ 1
initcall cmd64x_init+0x0/0x15 returned 0 after 14 usecs
calling hpt36x_init+0x0/0x15 @ 1
initcall hpt36x_init+0x0/0x15 returned 0 after 18 usecs
calling hpt3x2n_init+0x0/0x15 @ 1
initcall hpt3x2n_init+0x0/0x15 returned 0 after 15 usecs
calling hpt3x3_init+0x0/0x15 @ 1
initcall hpt3x3_init+0x0/0x15 returned 0 after 13 usecs
calling it821x_init+0x0/0x15 @ 1
initcall it821x_init+0x0/0x15 returned 0 after 14 usecs
calling jmicron_init+0x0/0x15 @ 1
initcall jmicron_init+0x0/0x15 returned 0 after 14 usecs
calling ninja32_init+0x0/0x15 @ 1
initcall ninja32_init+0x0/0x15 returned 0 after 15 usecs
calling ns87415_init+0x0/0x15 @ 1
initcall ns87415_init+0x0/0x15 returned 0 after 14 usecs
calling oldpiix_init+0x0/0x15 @ 1
initcall oldpiix_init+0x0/0x15 returned 0 after 14 usecs
calling optidma_init+0x0/0x15 @ 1
initcall optidma_init+0x0/0x15 returned 0 after 17 usecs
calling pdc202xx_init+0x0/0x15 @ 1
initcall pdc202xx_init+0x0/0x15 returned 0 after 15 usecs
calling rdc_init+0x0/0x15 @ 1
initcall rdc_init+0x0/0x15 returned 0 after 14 usecs
calling sch_init+0x0/0x15 @ 1
initcall sch_init+0x0/0x15 returned 0 after 14 usecs
calling sil680_init+0x0/0x15 @ 1
initcall sil680_init+0x0/0x15 returned 0 after 14 usecs
calling ata_tosh_init+0x0/0x15 @ 1
initcall ata_tosh_init+0x0/0x15 returned 0 after 17 usecs
calling via_init+0x0/0x15 @ 1
initcall via_init+0x0/0x15 returned 0 after 16 usecs
calling cmd640_init+0x0/0x15 @ 1
initcall cmd640_init+0x0/0x15 returned 0 after 14 usecs
calling ns87410_init+0x0/0x15 @ 1
initcall ns87410_init+0x0/0x15 returned 0 after 15 usecs
calling pcmcia_init+0x0/0xc @ 1
initcall pcmcia_init+0x0/0xc returned 0 after 26 usecs
calling pacpi_init+0x0/0x15 @ 1
initcall pacpi_init+0x0/0x15 returned 0 after 16 usecs
calling legacy_init+0x0/0x8da @ 1
initcall legacy_init+0x0/0x8da returned -19 after 20 usecs
calling davicom_init+0x0/0x61 @ 1
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x3f01f (20:600:0x13)
initcall davicom_init+0x0/0x61 returned 0 after 25 usecs
calling cicada_init+0x0/0x3d @ 1
initcall cicada_init+0x0/0x3d returned 0 after 16 usecs
calling lxt_init+0x0/0x61 @ 1
initcall lxt_init+0x0/0x61 returned 0 after 23 usecs
calling qs6612_init+0x0/0xc @ 1
initcall qs6612_init+0x0/0xc returned 0 after 9 usecs
calling vsc82xx_init+0x0/0x3d @ 1
initcall vsc82xx_init+0x0/0x3d returned 0 after 20 usecs
calling bcm63xx_phy_init+0x0/0x3d @ 1
ata1.00: configured for UDMA/100
async_waiting @ 5
async_continuing @ 5 after 2 usec
scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
initcall 1_async_port_probe+0x0/0x46 returned 0 after 245665 usecs
calling 3_sd_probe_async+0x0/0x1a3 @ 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
async_continuing @ 79 after 246038 usec
initcall bcm63xx_phy_init+0x0/0x3d returned 0 after 18 usecs
calling icplus_init+0x0/0x25 @ 1
initcall icplus_init+0x0/0x25 returned 0 after 17 usecs
calling ns_init+0x0/0xc @ 1
initcall ns_init+0x0/0xc returned 0 after 11 usecs
calling ste10Xp_init+0x0/0x22 @ 1
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
initcall ste10Xp_init+0x0/0x22 returned 0 after 17 usecs
calling e1000_init_module+0x0/0x7d @ 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
sd 0:0:0:0: [sda] Attached SCSI disk
initcall 3_sd_probe_async+0x0/0x1a3 returned 0 after 88488 usecs
e1000: Copyright (c) 1999-2006 Intel Corporation.
initcall e1000_init_module+0x0/0x7d returned 0 after 18808 usecs
calling e1000_init_module+0x0/0x3a @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
initcall e1000_init_module+0x0/0x3a returned 0 after 9108 usecs
calling ixgb_init_module+0x0/0x48 @ 1
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
initcall ixgb_init_module+0x0/0x48 returned 0 after 9957 usecs
calling cxgb4vf_module_init+0x0/0x9e @ 1
initcall cxgb4vf_module_init+0x0/0x9e returned 0 after 33 usecs
calling enic_init_module+0x0/0x33 @ 1
enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.12
ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x701f (600:60:0x1c)
initcall enic_init_module+0x0/0x33 returned 0 after 17251 usecs
calling jme_init_module+0x0/0x2c @ 1
jme: JMicron JMC2XX ethernet driver version 1.0.8
initcall jme_init_module+0x0/0x2c returned 0 after 4345 usecs
calling be_init_module+0x0/0x68 @ 1
initcall be_init_module+0x0/0x68 returned 0 after 14 usecs
ata2.01: configured for UDMA/33
calling vmxnet3_init_module+0x0/0x33 @ 1
VMware vmxnet3 virtual NIC driver - version 1.0.25.0-k-NAPI
initcall vmxnet3_init_module+0x0/0x33 returned 0 after 5200 usecs
async_waiting @ 79
async_continuing @ 79 after 2 usec
scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
scsi 1:0:1:0: Attached scsi generic sg1 type 5
initcall 2_async_port_probe+0x0/0x46 returned 0 after 469820 usecs
calling bnad_module_init+0x0/0x54 @ 1
Brocade 10G Ethernet driver
initcall bnad_module_init+0x0/0x54 returned 0 after 2485 usecs
calling happy_meal_probe+0x0/0x15 @ 1
initcall happy_meal_probe+0x0/0x15 returned 0 after 14 usecs
calling gem_init+0x0/0x15 @ 1
initcall gem_init+0x0/0x15 returned 0 after 15 usecs
calling vortex_init+0x0/0xa5 @ 1
initcall vortex_init+0x0/0xa5 returned 0 after 21 usecs
calling e100_init_module+0x0/0x59 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x59 returned 0 after 8777 usecs
calling tlan_probe+0x0/0xda @ 1
tlan: ThunderLAN driver v1.17
tlan: 0 devices installed, PCI: 0 EISA: 0
initcall tlan_probe+0x0/0xda returned -19 after 6417 usecs
calling epic_init+0x0/0x15 @ 1
initcall epic_init+0x0/0x15 returned 0 after 15 usecs
calling sis190_init_module+0x0/0x15 @ 1
initcall sis190_init_module+0x0/0x15 returned 0 after 15 usecs
calling sis900_init_module+0x0/0x15 @ 1
initcall sis900_init_module+0x0/0x15 returned 0 after 15 usecs
calling yellowfin_init+0x0/0x15 @ 1
initcall yellowfin_init+0x0/0x15 returned 0 after 15 usecs
calling acenic_init+0x0/0x15 @ 1
initcall acenic_init+0x0/0x15 returned 0 after 15 usecs
calling natsemi_init_mod+0x0/0x15 @ 1
initcall natsemi_init_mod+0x0/0x15 returned 0 after 17 usecs
calling fealnx_init+0x0/0x15 @ 1
initcall fealnx_init+0x0/0x15 returned 0 after 15 usecs
calling tg3_init+0x0/0x15 @ 1
initcall tg3_init+0x0/0x15 returned 0 after 26 usecs
calling bnx2_init+0x0/0x15 @ 1
initcall bnx2_init+0x0/0x15 returned 0 after 16 usecs
calling cnic_init+0x0/0x70 @ 1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
initcall cnic_init+0x0/0x70 returned 0 after 5900 usecs
calling skge_init_module+0x0/0x6f @ 1
initcall skge_init_module+0x0/0x6f returned 0 after 44 usecs
calling ks8842_init+0x0/0xc @ 1
initcall ks8842_init+0x0/0xc returned 0 after 13 usecs
calling ks8851_init+0x0/0xc @ 1
initcall ks8851_init+0x0/0xc returned 0 after 9 usecs
calling velocity_init_module+0x0/0x38 @ 1
initcall velocity_init_module+0x0/0x38 returned 0 after 16 usecs
calling starfire_init+0x0/0x15 @ 1
initcall starfire_init+0x0/0x15 returned 0 after 15 usecs
calling stmmac_init_module+0x0/0x36 @ 1
initcall stmmac_init_module+0x0/0x36 returned 0 after 21 usecs
calling sundance_init+0x0/0x15 @ 1
initcall sundance_init+0x0/0x15 returned 0 after 16 usecs
calling hamachi_init+0x0/0x15 @ 1
initcall hamachi_init+0x0/0x15 returned 0 after 15 usecs
calling net_olddevs_init+0x0/0xa3 @ 1
initcall net_olddevs_init+0x0/0xa3 returned 0 after 86 usecs
calling b44_init+0x0/0x49 @ 1
initcall b44_init+0x0/0x49 returned 0 after 25 usecs
calling init_nic+0x0/0x15 @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall init_nic+0x0/0x15 returned 0 after 552003 usecs
calling ql3xxx_init_module+0x0/0x15 @ 1
initcall ql3xxx_init_module+0x0/0x15 returned 0 after 15 usecs
calling qlcnic_init_module+0x0/0xab @ 1
QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.15
initcall qlcnic_init_module+0x0/0xab returned 0 after 5410 usecs
calling qlge_init_module+0x0/0x15 @ 1
initcall qlge_init_module+0x0/0x15 returned 0 after 15 usecs
calling slip_init+0x0/0xa8 @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xa8 returned 0 after 10962 usecs
calling dummy_init_module+0x0/0xbc @ 1
initcall dummy_init_module+0x0/0xbc returned 0 after 363 usecs
calling macvlan_init_module+0x0/0x33 @ 1
initcall macvlan_init_module+0x0/0x33 returned 0 after 2 usecs
calling macvtap_init+0x0/0xcd @ 1
initcall macvtap_init+0x0/0xcd returned 0 after 16 usecs
calling cp_init+0x0/0x15 @ 1
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
initcall cp_init+0x0/0x15 returned 0 after 13569 usecs
calling rtl8139_init_module+0x0/0x15 @ 1
8139too: 8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
8139too 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 17
initcall rtl8139_init_module+0x0/0x15 returned 0 after 22920 usecs
calling rtl8169_init_module+0x0/0x15 @ 1
initcall rtl8169_init_module+0x0/0x15 returned 0 after 18 usecs
calling myri10ge_init_module+0x0/0x62 @ 1
myri10ge: Version 1.5.2-1.459
initcall myri10ge_init_module+0x0/0x62 returned 0 after 2653 usecs
calling mlx4_init+0x0/0x9b @ 1
initcall mlx4_init+0x0/0x9b returned 0 after 48 usecs
calling ethoc_init+0x0/0xc @ 1
initcall ethoc_init+0x0/0xc returned 0 after 13 usecs
calling dnet_init+0x0/0xc @ 1
initcall dnet_init+0x0/0xc returned 0 after 13 usecs
calling olympic_pci_init+0x0/0x15 @ 1
initcall olympic_pci_init+0x0/0x15 returned 0 after 31 usecs
calling xl_pci_init+0x0/0x15 @ 1
initcall xl_pci_init+0x0/0x15 returned 0 after 15 usecs
calling init_tc574+0x0/0xc @ 1
initcall init_tc574+0x0/0xc returned 0 after 11 usecs
calling init_fmvj18x_cs+0x0/0xc @ 1
initcall init_fmvj18x_cs+0x0/0xc returned 0 after 16 usecs
calling init_nmclan_cs+0x0/0xc @ 1
initcall init_nmclan_cs+0x0/0xc returned 0 after 12 usecs
calling init_smc91c92_cs+0x0/0xc @ 1
initcall init_smc91c92_cs+0x0/0xc returned 0 after 14 usecs
calling init_xirc2ps_cs+0x0/0xc @ 1
initcall init_xirc2ps_cs+0x0/0xc returned 0 after 12 usecs
calling init_axnet_cs+0x0/0xc @ 1
initcall init_axnet_cs+0x0/0xc returned 0 after 13 usecs
calling init_ibmtr_cs+0x0/0xc @ 1
initcall init_ibmtr_cs+0x0/0xc returned 0 after 10 usecs
calling catc_init+0x0/0x2e @ 1
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
initcall catc_init+0x0/0x2e returned 0 after 8520 usecs
calling kaweth_init+0x0/0x15 @ 1
usbcore: registered new interface driver kaweth
initcall kaweth_init+0x0/0x15 returned 0 after 4172 usecs
calling pegasus_init+0x0/0x166 @ 1
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x166 returned 0 after 10291 usecs
calling asix_init+0x0/0x15 @ 1
usbcore: registered new interface driver asix
initcall asix_init+0x0/0x15 returned 0 after 4004 usecs
calling cdc_init+0x0/0x15 @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x15 returned 0 after 4425 usecs
calling eem_init+0x0/0x15 @ 1
usbcore: registered new interface driver cdc_eem
initcall eem_init+0x0/0x15 returned 0 after 4264 usecs
calling dm9601_init+0x0/0x15 @ 1
usbcore: registered new interface driver dm9601
initcall dm9601_init+0x0/0x15 returned 0 after 4178 usecs
calling smsc95xx_init+0x0/0x15 @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_init+0x0/0x15 returned 0 after 4342 usecs
calling usbnet_init+0x0/0x15 @ 1
usbcore: registered new interface driver gl620a
initcall usbnet_init+0x0/0x15 returned 0 after 4182 usecs
calling net1080_init+0x0/0x15 @ 1
usbcore: registered new interface driver net1080
initcall net1080_init+0x0/0x15 returned 0 after 4264 usecs
calling plusb_init+0x0/0x15 @ 1
usbcore: registered new interface driver plusb
initcall plusb_init+0x0/0x15 returned 0 after 4094 usecs
calling rndis_init+0x0/0x15 @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_init+0x0/0x15 returned 0 after 4512 usecs
calling usbnet_init+0x0/0x28 @ 1
initcall usbnet_init+0x0/0x28 returned 0 after 5 usecs
calling int51x1_init+0x0/0x15 @ 1
usbcore: registered new interface driver int51x1
initcall int51x1_init+0x0/0x15 returned 0 after 4258 usecs
calling sierra_net_init+0x0/0x15 @ 1
usbcore: registered new interface driver sierra_net
initcall sierra_net_init+0x0/0x15 returned 0 after 4518 usecs
calling w840_init+0x0/0x25 @ 1
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <[email protected]>
http://www.scyld.com/network/drivers.html
initcall w840_init+0x0/0x25 returned 0 after 10637 usecs
calling de_init+0x0/0x15 @ 1
initcall de_init+0x0/0x15 returned 0 after 15 usecs
calling tulip_init+0x0/0x2d @ 1
initcall tulip_init+0x0/0x2d returned 0 after 21 usecs
calling de4x5_module_init+0x0/0x15 @ 1
initcall de4x5_module_init+0x0/0x15 returned 0 after 18 usecs
calling uli526x_init_module+0x0/0x9a @ 1
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
initcall uli526x_init_module+0x0/0x9a returned 0 after 5448 usecs
calling init_netconsole+0x0/0x1e3 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1e3 returned 0 after 5467 usecs
calling niu_init+0x0/0x37 @ 1
initcall niu_init+0x0/0x37 returned 0 after 15 usecs
calling efx_init_module+0x0/0x8c @ 1
Solarflare NET driver v3.1
initcall efx_init_module+0x0/0x8c returned 0 after 2439 usecs
calling caif_ser_init+0x0/0x46 @ 1
initcall caif_ser_init+0x0/0x46 returned 0 after 4 usecs
calling cfspi_init_module+0x0/0x161 @ 1
initcall cfspi_init_module+0x0/0x161 returned 0 after 16 usecs
calling nosy_init+0x0/0x15 @ 1
initcall nosy_init+0x0/0x15 returned 0 after 15 usecs
calling uio_init+0x0/0xe6 @ 1
initcall uio_init+0x0/0xe6 returned 0 after 16 usecs
calling uio_pdrv_genirq_init+0x0/0xc @ 1
initcall uio_pdrv_genirq_init+0x0/0xc returned 0 after 10 usecs
calling aectc_init+0x0/0x15 @ 1
initcall aectc_init+0x0/0x15 returned 0 after 15 usecs
calling aoe_init+0x0/0xa2 @ 1
aoe: AoE v47 initialised.
initcall aoe_init+0x0/0xa2 returned 0 after 2608 usecs
calling uwb_subsys_init+0x0/0x47 @ 1
initcall uwb_subsys_init+0x0/0x47 returned 0 after 14 usecs
calling umc_bus_init+0x0/0xc @ 1
initcall umc_bus_init+0x0/0xc returned 0 after 13 usecs
calling whci_init+0x0/0x15 @ 1
initcall whci_init+0x0/0x15 returned 0 after 21 usecs
calling whcrc_driver_init+0x0/0x15 @ 1
initcall whcrc_driver_init+0x0/0x15 returned 0 after 15 usecs
calling hwarc_driver_init+0x0/0x15 @ 1
usbcore: registered new interface driver hwa-rc
initcall hwarc_driver_init+0x0/0x15 returned 0 after 4180 usecs
calling ehci_hcd_init+0x0/0xe1 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10
ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: supports USB remote wakeup
ehci_hcd 0000:00:02.1: irq 22, io mem 0x40000000
ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38-tip-11308-g785c78f-dirty ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
initcall ehci_hcd_init+0x0/0xe1 returned 0 after 219699 usecs
calling oxu_module_init+0x0/0xc @ 1
initcall oxu_module_init+0x0/0xc returned 0 after 12 usecs
calling isp1362_init+0x0/0x3a @ 1
driver isp1362-hcd, 2005-04-04
initcall isp1362_init+0x0/0x3a returned 0 after 2733 usecs
calling ohci_hcd_mod_init+0x0/0xd1 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: enabled nVidia shutdown quirk
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: supports USB remote wakeup
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
ohci_hcd 0000:00:02.0: irq 21, io mem 0xda102000
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0020
ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38-tip-11308-g785c78f-dirty ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:02.1: HS companion for 0000:00:02.0
initcall ohci_hcd_mod_init+0x0/0xd1 returned 0 after 311948 usecs
calling uhci_hcd_init+0x0/0x104 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x104 returned 0 after 4961 usecs
calling hwahc_driver_init+0x0/0x15 @ 1
usbcore: registered new interface driver hwa-hc
initcall hwahc_driver_init+0x0/0x15 returned 0 after 4180 usecs
calling wusbcore_init+0x0/0x6e @ 1
initcall wusbcore_init+0x0/0x6e returned 0 after 31 usecs
calling acm_init+0x0/0xf2 @ 1
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0xf2 returned 0 after 11332 usecs
calling usblp_init+0x0/0x15 @ 1
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x15 returned 0 after 4096 usecs
calling wdm_init+0x0/0x15 @ 1
usbcore: registered new interface driver cdc_wdm
initcall wdm_init+0x0/0x15 returned 0 after 4273 usecs
calling usb_stor_init+0x0/0x46 @ 1
Initializing USB Mass Storage driver...
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x46 returned 0 after 3535 usecs
calling usb_usual_init+0x0/0x3e @ 1
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x3e returned 0 after 19 usecs
calling cypress_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-cypress
initcall cypress_init+0x0/0x15 returned 0 after 16 usecs
calling datafab_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-datafab
initcall datafab_init+0x0/0x15 returned 0 after 13 usecs
calling ene_ub6250_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums_eneub6250
initcall ene_ub6250_init+0x0/0x15 returned 0 after 13 usecs
calling freecom_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-freecom
initcall freecom_init+0x0/0x15 returned 0 after 13 usecs
calling isd200_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-isd200
initcall isd200_init+0x0/0x15 returned 0 after 15 usecs
calling onetouch_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-onetouch
initcall onetouch_init+0x0/0x15 returned 0 after 13 usecs
calling sddr09_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-sddr09
initcall sddr09_init+0x0/0x15 returned 0 after 15 usecs
calling usbat_init+0x0/0x15 @ 1
usbcore: registered new interface driver ums-usbat
initcall usbat_init+0x0/0x15 returned 0 after 13 usecs
calling usb_mdc800_init+0x0/0x287 @ 1
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x287 returned 0 after 15 usecs
calling microtek_drv_init+0x0/0x15 @ 1
usbcore: registered new interface driver microtekX6
initcall microtek_drv_init+0x0/0x15 returned 0 after 12 usecs
calling usb_serial_init+0x0/0x1da @ 1
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
initcall usb_serial_init+0x0/0x1da returned 0 after 60 usecs
calling aircable_init+0x0/0x46 @ 1
USB Serial support registered for aircable
usbcore: registered new interface driver aircable
initcall aircable_init+0x0/0x46 returned 0 after 21 usecs
calling belkin_sa_init+0x0/0x4e @ 1
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
belkin_sa: v1.3:USB Belkin Serial converter driver
initcall belkin_sa_init+0x0/0x4e returned 0 after 23 usecs
calling ch341_init+0x0/0x46 @ 1
USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
initcall ch341_init+0x0/0x46 returned 0 after 21 usecs
calling cp210x_init+0x0/0x4e @ 1
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
initcall cp210x_init+0x0/0x4e returned 0 after 24 usecs
calling cyberjack_init+0x0/0x5c @ 1
USB Serial support registered for Reiner SCT Cyberjack USB card reader
usbcore: registered new interface driver cyberjack
cyberjack: v1.01 Matthias Bruestle
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
initcall cyberjack_init+0x0/0x5c returned 0 after 26 usecs
calling digi_init+0x0/0x6c @ 1
USB Serial support registered for Digi 2 port USB adapter
USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver digi_acceleport
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
initcall digi_init+0x0/0x6c returned 0 after 34 usecs
calling edgeport_init+0x0/0xb6 @ 1
USB Serial support registered for Edgeport 2 port adapter
USB Serial support registered for Edgeport 4 port adapter
USB Serial support registered for Edgeport 8 port adapter
USB Serial support registered for EPiC device
usbcore: registered new interface driver io_edgeport
io_edgeport: v2.7:Edgeport USB Serial Driver
initcall edgeport_init+0x0/0xb6 returned 0 after 51 usecs
calling ftdi_init+0x0/0xc7 @ 1
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
initcall ftdi_init+0x0/0xc7 returned 0 after 39 usecs
calling funsoft_init+0x0/0x46 @ 1
USB Serial support registered for funsoft
usbcore: registered new interface driver funsoft
initcall funsoft_init+0x0/0x46 returned 0 after 21 usecs
calling hp49gp_init+0x0/0x4e @ 1
USB Serial support registered for hp4X
usbcore: registered new interface driver hp4X
hp4x: v1.00:HP4x (48/49) Generic Serial driver
initcall hp49gp_init+0x0/0x4e returned 0 after 22 usecs
calling usb_ipw_init+0x0/0x4e @ 1
USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: v0.4:IPWireless tty driver
initcall usb_ipw_init+0x0/0x4e returned 0 after 22 usecs
calling iuu_init+0x0/0x4e @ 1
USB Serial support registered for iuu_phoenix
usbcore: registered new interface driver iuu_phoenix
iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
initcall iuu_init+0x0/0x4e returned 0 after 23 usecs
calling klsi_105_init+0x0/0x4e @ 1
USB Serial support registered for KL5KUSB105D / PalmConnect
usbcore: registered new interface driver kl5kusb105d
kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
initcall klsi_105_init+0x0/0x4e returned 0 after 25 usecs
calling kobil_init+0x0/0x4e @ 1
USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobil
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
initcall kobil_init+0x0/0x4e returned 0 after 25 usecs
calling mct_u232_init+0x0/0x4e @ 1
USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232
mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
initcall mct_u232_init+0x0/0x4e returned 0 after 23 usecs
calling navman_init+0x0/0x46 @ 1
USB Serial support registered for navman
usbcore: registered new interface driver navman
initcall navman_init+0x0/0x46 returned 0 after 21 usecs
calling qcaux_init+0x0/0x46 @ 1
USB Serial support registered for qcaux
usbcore: registered new interface driver qcaux
initcall qcaux_init+0x0/0x46 returned 0 after 21 usecs
calling samba_init+0x0/0x4e @ 1
USB Serial support registered for sam-ba
usbcore: registered new interface driver sam-ba
sam_ba: v1.0: Atmel SAM Boot Assistant (SAM-BA) driver
initcall samba_init+0x0/0x4e returned 0 after 25 usecs
calling spcp8x5_init+0x0/0x4e @ 1
USB Serial support registered for SPCP8x5
usbcore: registered new interface driver spcp8x5
spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
initcall spcp8x5_init+0x0/0x4e returned 0 after 23 usecs
calling ssu100_init+0x0/0x73 @ 1
USB Serial support registered for Quatech SSU-100 USB to Serial Driver
usbcore: registered new interface driver ssu100
ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
initcall ssu100_init+0x0/0x73 returned 0 after 23 usecs
calling visor_init+0x0/0x1c5 @ 1
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
initcall visor_init+0x0/0x1c5 returned 0 after 42 usecs
calling zio_init+0x0/0x46 @ 1
USB Serial support registered for zio
usbcore: registered new interface driver zio
initcall zio_init+0x0/0x46 returned 0 after 24 usecs
calling emi26_init+0x0/0x15 @ 1
usbcore: registered new interface driver emi26 - firmware loader
initcall emi26_init+0x0/0x15 returned 0 after 13 usecs
calling emi62_init+0x0/0x2e @ 1
usbcore: registered new interface driver emi62 - firmware loader
initcall emi62_init+0x0/0x2e returned 0 after 13 usecs
calling ftdi_elan_init+0x0/0x158 @ 1
driver ftdi-elan built at 13:23:41 on Mar 29 2011
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x158 returned 0 after 76 usecs
calling iowarrior_init+0x0/0x15 @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_init+0x0/0x15 returned 0 after 13 usecs
calling usb_lcd_init+0x0/0x30 @ 1
usbcore: registered new interface driver usblcd
initcall usb_lcd_init+0x0/0x30 returned 0 after 13 usecs
calling usb_led_init+0x0/0x30 @ 1
usbcore: registered new interface driver usbled
initcall usb_led_init+0x0/0x30 returned 0 after 13 usecs
calling lego_usb_tower_init+0x0/0x96 @ 1
drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
usbcore: registered new interface driver legousbtower
legousbtower: v0.96:LEGO USB Tower Driver
drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
initcall lego_usb_tower_init+0x0/0x96 returned 0 after 17 usecs
calling usb_rio_init+0x0/0x2e @ 1
usbcore: registered new interface driver rio500
rio500: v1.1:USB Rio 500 driver
initcall usb_rio_init+0x0/0x2e returned 0 after 13 usecs
calling tv_init+0x0/0x40 @ 1
usbcore: registered new interface driver trancevibrator
trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
initcall tv_init+0x0/0x40 returned 0 after 17 usecs
calling usb_yurex_init+0x0/0x30 @ 1
usbcore: registered new interface driver yurex
initcall usb_yurex_init+0x0/0x30 returned 0 after 13 usecs
calling fusb300_udc_init+0x0/0x13 @ 1
initcall fusb300_udc_init+0x0/0x13 returned -19 after 23 usecs
calling webcam_init+0x0/0x13 @ 1
initcall webcam_init+0x0/0x13 returned -19 after 2 usecs
calling i8042_init+0x0/0x3b7 @ 1
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
initcall i8042_init+0x0/0x3b7 returned 0 after 823 usecs
calling serport_init+0x0/0x2a @ 1
initcall serport_init+0x0/0x2a returned 0 after 2 usecs
calling pcips2_init+0x0/0x15 @ 1
initcall pcips2_init+0x0/0x15 returned 0 after 42 usecs
calling altera_ps2_init+0x0/0xc @ 1
initcall altera_ps2_init+0x0/0xc returned 0 after 10 usecs
calling emu_init+0x0/0x15 @ 1
initcall emu_init+0x0/0x15 returned 0 after 17 usecs
calling fm801_gp_init+0x0/0x15 @ 1
initcall fm801_gp_init+0x0/0x15 returned 0 after 17 usecs
calling l4_init+0x0/0x29d @ 1
initcall l4_init+0x0/0x29d returned -19 after 15 usecs
calling mousedev_init+0x0/0x83 @ 1
mousedev: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x83 returned 0 after 183 usecs
calling evdev_init+0x0/0xc @ 1
initcall evdev_init+0x0/0xc returned 0 after 94 usecs
calling evbug_init+0x0/0xc @ 1
evbug: Connected device: input0 (Power Button at PNP0C0C/button/input0)
evbug: Connected device: input1 (Power Button at LNXPWRBN/button/input0)
initcall evbug_init+0x0/0xc returned 0 after 7 usecs
calling adp5588_init+0x0/0xe @ 1
initcall adp5588_init+0x0/0xe returned 0 after 15 usecs
calling atkbd_init+0x0/0x23 @ 1
initcall atkbd_init+0x0/0x23 returned 0 after 15 usecs
calling mcs_touchkey_init+0x0/0xe @ 1
initcall mcs_touchkey_init+0x0/0xe returned 0 after 9 usecs
calling nkbd_init+0x0/0x15 @ 1
initcall nkbd_init+0x0/0x15 returned 0 after 12 usecs
calling opencores_kbd_init+0x0/0xc @ 1
initcall opencores_kbd_init+0x0/0xc returned 0 after 11 usecs
calling adi_init+0x0/0x15 @ 1
initcall adi_init+0x0/0x15 returned 0 after 11 usecs
calling as5011_init+0x0/0xe @ 1
initcall as5011_init+0x0/0xe returned 0 after 9 usecs
calling gf2k_init+0x0/0x15 @ 1
initcall gf2k_init+0x0/0x15 returned 0 after 9 usecs
calling grip_init+0x0/0x15 @ 1
initcall grip_init+0x0/0x15 returned 0 after 9 usecs
calling grip_init+0x0/0x15 @ 1
initcall grip_init+0x0/0x15 returned 0 after 9 usecs
calling twidjoy_init+0x0/0x15 @ 1
initcall twidjoy_init+0x0/0x15 returned 0 after 9 usecs
calling zhenhua_init+0x0/0x15 @ 1
initcall zhenhua_init+0x0/0x15 returned 0 after 9 usecs
calling aiptek_init+0x0/0x3c @ 1
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
initcall aiptek_init+0x0/0x3c returned 0 after 21 usecs
calling hanwang_init+0x0/0x15 @ 1
usbcore: registered new interface driver hanwang
initcall hanwang_init+0x0/0x15 returned 0 after 15 usecs
calling mxt_init+0x0/0xe @ 1
initcall mxt_init+0x0/0xe returned 0 after 10 usecs
calling gunze_init+0x0/0x15 @ 1
initcall gunze_init+0x0/0x15 returned 0 after 9 usecs
calling eeti_ts_init+0x0/0xe @ 1
initcall eeti_ts_init+0x0/0xe returned 0 after 9 usecs
calling inexio_init+0x0/0x15 @ 1
initcall inexio_init+0x0/0x15 returned 0 after 9 usecs
calling mcs5000_ts_init+0x0/0xe @ 1
initcall mcs5000_ts_init+0x0/0xe returned 0 after 11 usecs
calling mk712_init+0x0/0x1b9 @ 1
mk712: device not present
initcall mk712_init+0x0/0x1b9 returned -19 after 5 usecs
calling tr_init+0x0/0x15 @ 1
initcall tr_init+0x0/0x15 returned 0 after 9 usecs
calling tsc2007_init+0x0/0xe @ 1
initcall tsc2007_init+0x0/0xe returned 0 after 9 usecs
calling tps6507x_ts_init+0x0/0xc @ 1
initcall tps6507x_ts_init+0x0/0xc returned 0 after 10 usecs
calling i2o_iop_init+0x0/0x4c @ 1
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x4c returned 0 after 147 usecs
calling i2o_config_init+0x0/0x93 @ 1
I2O Configuration OSM v1.323
initcall i2o_config_init+0x0/0x93 returned 0 after 69 usecs
calling i2o_bus_init+0x0/0x3a @ 1
I2O Bus Adapter OSM v1.317
initcall i2o_bus_init+0x0/0x3a returned 0 after 13 usecs
calling i2o_block_init+0x0/0x116 @ 1
I2O Block Device OSM v1.325
initcall i2o_block_init+0x0/0x116 returned 0 after 134 usecs
calling i2o_proc_init+0x0/0x181 @ 1
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x181 returned 0 after 19 usecs
calling i2c_ali1535_init+0x0/0x15 @ 1
initcall i2c_ali1535_init+0x0/0x15 returned 0 after 22 usecs
calling ali1563_init+0x0/0x15 @ 1
initcall ali1563_init+0x0/0x15 returned 0 after 19 usecs
calling i2c_ali15x3_init+0x0/0x15 @ 1
initcall i2c_ali15x3_init+0x0/0x15 returned 0 after 15 usecs
calling i2c_sch_init+0x0/0xc @ 1
initcall i2c_sch_init+0x0/0xc returned 0 after 13 usecs
calling nforce2_init+0x0/0x15 @ 1
ohci_hcd 0000:00:02.0: auto-stop root hub
i2c i2c-0: Transaction failed (0x10)!
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
evbug: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
initcall nforce2_init+0x0/0x15 returned 0 after 1582182 usecs
calling i2c_piix4_init+0x0/0x15 @ 1
initcall i2c_piix4_init+0x0/0x15 returned 0 after 21 usecs
calling i2c_sis5595_init+0x0/0x15 @ 1
initcall i2c_sis5595_init+0x0/0x15 returned 0 after 16 usecs
calling i2c_vt586b_init+0x0/0x15 @ 1
initcall i2c_vt586b_init+0x0/0x15 returned 0 after 15 usecs
calling i2c_vt596_init+0x0/0x15 @ 1
initcall i2c_vt596_init+0x0/0x15 returned 0 after 17 usecs
calling intel_mid_i2c_init+0x0/0x15 @ 1
initcall intel_mid_i2c_init+0x0/0x15 returned 0 after 17 usecs
calling i2c_adap_simtec_init+0x0/0xc @ 1
initcall i2c_adap_simtec_init+0x0/0xc returned 0 after 13 usecs
calling xiic_i2c_init+0x0/0xc @ 1
initcall xiic_i2c_init+0x0/0xc returned 0 after 9 usecs
calling diolan_u2c_init+0x0/0x15 @ 1
usbcore: registered new interface driver i2c-diolan-u2c
initcall diolan_u2c_init+0x0/0x15 returned 0 after 4875 usecs
calling taos_init+0x0/0x15 @ 1
initcall taos_init+0x0/0x15 returned 0 after 22 usecs
calling usb_i2c_tiny_usb_init+0x0/0x15 @ 1
usbcore: registered new interface driver i2c-tiny-usb
initcall usb_i2c_tiny_usb_init+0x0/0x15 returned 0 after 4697 usecs
calling pca9541_init+0x0/0xe @ 1
initcall pca9541_init+0x0/0xe returned 0 after 17 usecs
calling saa7146_vv_init_module+0x0/0x3 @ 1
initcall saa7146_vv_init_module+0x0/0x3 returned 0 after 1 usecs
calling videodev_init+0x0/0x7f @ 1
Linux video capture interface: v2.00
initcall videodev_init+0x0/0x7f returned 0 after 3242 usecs
calling init_tuner+0x0/0xe @ 1
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
initcall init_tuner+0x0/0xe returned 0 after 9107 usecs
calling init_tda9840+0x0/0xe @ 1
initcall init_tda9840+0x0/0xe returned 0 after 11 usecs
calling init_tea6415c+0x0/0xe @ 1
initcall init_tea6415c+0x0/0xe returned 0 after 12 usecs
calling init_tea6420+0x0/0xe @ 1
initcall init_tea6420+0x0/0xe returned 0 after 11 usecs
calling init_saa711x+0x0/0xe @ 1
initcall init_saa711x+0x0/0xe returned 0 after 10 usecs
calling init_adv7170+0x0/0xe @ 1
initcall init_adv7170+0x0/0xe returned 0 after 11 usecs
calling init_adv7175+0x0/0xe @ 1
initcall init_adv7175+0x0/0xe returned 0 after 11 usecs
calling adv7180_init+0x0/0xe @ 1
initcall adv7180_init+0x0/0xe returned 0 after 10 usecs
calling init_vpx3220+0x0/0xe @ 1
initcall init_vpx3220+0x0/0xe returned 0 after 11 usecs
calling init_bt819+0x0/0xe @ 1
initcall init_bt819+0x0/0xe returned 0 after 13 usecs
calling init_bt856+0x0/0xe @ 1
initcall init_bt856+0x0/0xe returned 0 after 11 usecs
calling init_bt866+0x0/0xe @ 1
initcall init_bt866+0x0/0xe returned 0 after 11 usecs
calling init_ks0127+0x0/0xe @ 1
initcall init_ks0127+0x0/0xe returned 0 after 10 usecs
calling sr030pc30_init+0x0/0xe @ 1
initcall sr030pc30_init+0x0/0xe returned 0 after 11 usecs
calling noon010_init+0x0/0xe @ 1
initcall noon010_init+0x0/0xe returned 0 after 11 usecs
calling zoran_init+0x0/0x161 @ 1
Zoran MJPEG board driver version 0.10.0
initcall zoran_init+0x0/0x161 returned 0 after 3503 usecs
calling videocodec_init+0x0/0x56 @ 1
Linux video codec intermediate layer: v0.2
initcall videocodec_init+0x0/0x56 returned 0 after 3749 usecs
calling zr36050_init_module+0x0/0x16 @ 1
initcall zr36050_init_module+0x0/0x16 returned 0 after 1 usecs
calling zr36016_init_module+0x0/0x16 @ 1
initcall zr36016_init_module+0x0/0x16 returned 0 after 1 usecs
calling zr36060_init_module+0x0/0x16 @ 1
initcall zr36060_init_module+0x0/0x16 returned 0 after 1 usecs
calling cpia2_init+0x0/0x168 @ 1
cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.0
usbcore: registered new interface driver cpia2
initcall cpia2_init+0x0/0x168 returned 0 after 8939 usecs
calling mxb_init_module+0x0/0x4f @ 1
saa7146: register extension 'Multimedia eXtension Board'.
initcall mxb_init_module+0x0/0x4f returned 0 after 5026 usecs
calling timblogiw_init+0x0/0xc @ 1
initcall timblogiw_init+0x0/0xc returned 0 after 10 usecs
calling sn9c102_module_init+0x0/0x84 @ 1
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
initcall sn9c102_module_init+0x0/0x84 returned 0 after 10121 usecs
calling gspca_init+0x0/0x1f @ 1
gspca: v2.12.0 registered
initcall gspca_init+0x0/0x1f returned 0 after 2301 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver benq
initcall sd_mod_init+0x0/0x15 returned 0 after 4012 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver etoms
initcall sd_mod_init+0x0/0x15 returned 0 after 4105 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver jeilinj
initcall sd_mod_init+0x0/0x15 returned 0 after 4275 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver konica
initcall sd_mod_init+0x0/0x15 returned 0 after 4181 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver pac207
initcall sd_mod_init+0x0/0x15 returned 0 after 4180 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver pac7302
initcall sd_mod_init+0x0/0x15 returned 0 after 4275 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver pac7311
initcall sd_mod_init+0x0/0x15 returned 0 after 4273 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver sn9c20x
initcall sd_mod_init+0x0/0x15 returned 0 after 4266 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver sonixb
initcall sd_mod_init+0x0/0x15 returned 0 after 4179 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver sonixj
initcall sd_mod_init+0x0/0x15 returned 0 after 4191 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver spca501
initcall sd_mod_init+0x0/0x15 returned 0 after 4276 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver spca505
initcall sd_mod_init+0x0/0x15 returned 0 after 4266 usecs
calling sd_mod_init+0x0/0x39 @ 1
usbcore: registered new interface driver spca506
spca506: registered
initcall sd_mod_init+0x0/0x39 returned 0 after 6069 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver spca508
initcall sd_mod_init+0x0/0x15 returned 0 after 4275 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver sq905c
initcall sd_mod_init+0x0/0x15 returned 0 after 4180 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver sunplus
initcall sd_mod_init+0x0/0x15 returned 0 after 4265 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver stk014
initcall sd_mod_init+0x0/0x15 returned 0 after 4191 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver stv0680
initcall sd_mod_init+0x0/0x15 returned 0 after 4272 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver tv8532
initcall sd_mod_init+0x0/0x15 returned 0 after 4182 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver xirlink-cit
initcall sd_mod_init+0x0/0x15 returned 0 after 4605 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver zc3xx
initcall sd_mod_init+0x0/0x15 returned 0 after 4108 usecs
calling mod_m5602_init+0x0/0x15 @ 1
usbcore: registered new interface driver ALi m5602
initcall mod_m5602_init+0x0/0x15 returned 0 after 4445 usecs
calling sd_mod_init+0x0/0x15 @ 1
usbcore: registered new interface driver STV06xx
initcall sd_mod_init+0x0/0x15 returned 0 after 4263 usecs
calling sd_mod_init+0x0/0x39 @ 1
gspca_gl860: driver startup - version 0.9d10
usbcore: registered new interface driver gspca_gl860
initcall sd_mod_init+0x0/0x39 returned 0 after 8524 usecs
calling usb_s2255_init+0x0/0x4e @ 1
usbcore: registered new interface driver s2255
initcall usb_s2255_init+0x0/0x4e returned 0 after 4095 usecs
calling pps_ktimer_init+0x0/0x8e @ 1
pps_core: source ktimer got cdev (254:0)
pps pps0: new PPS source ktimer
pps pps0: ktimer PPS source registered
initcall pps_ktimer_init+0x0/0x8e returned 0 after 9902 usecs
calling pps_tty_init+0x0/0x9a @ 1
pps_ldisc: PPS line discipline registered
initcall pps_tty_init+0x0/0x9a returned 0 after 3655 usecs
calling w1_init+0x0/0x9a @ 1
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0x9a returned 0 after 3777 usecs
calling matrox_w1_init+0x0/0x15 @ 1
initcall matrox_w1_init+0x0/0x15 returned 0 after 20 usecs
calling ds_init+0x0/0x30 @ 1
usbcore: registered new interface driver DS9490R
initcall ds_init+0x0/0x30 returned 0 after 4273 usecs
calling w1_therm_init+0x0/0x28 @ 1
initcall w1_therm_init+0x0/0x28 returned 0 after 2 usecs
calling w1_f2d_init+0x0/0xc @ 1
initcall w1_f2d_init+0x0/0xc returned 0 after 1 usecs
calling w1_ds2760_init+0x0/0x28 @ 1
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x28 returned 0 after 7303 usecs
calling w1_bq27000_init+0x0/0x1c @ 1
initcall w1_bq27000_init+0x0/0x1c returned 0 after 1 usecs
calling pda_power_init+0x0/0xc @ 1
initcall pda_power_init+0x0/0xc returned 0 after 12 usecs
calling ds278x_init+0x0/0xe @ 1
initcall ds278x_init+0x0/0xe returned 0 after 15 usecs
calling max17042_init+0x0/0xe @ 1
initcall max17042_init+0x0/0xe returned 0 after 12 usecs
calling telephony_init+0x0/0x50 @ 1
Linux telephony interface: v1.00
initcall telephony_init+0x0/0x50 returned 0 after 2897 usecs
calling isdn_init+0x0/0x2d9 @ 1
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2
initcall isdn_init+0x0/0x2d9 returned 0 after 5559 usecs
calling cpufreq_gov_powersave_init+0x0/0xc @ 1
initcall cpufreq_gov_powersave_init+0x0/0xc returned 0 after 2 usecs
calling cpufreq_gov_userspace_init+0x0/0xc @ 1
initcall cpufreq_gov_userspace_init+0x0/0xc returned 0 after 1 usecs
calling td_init+0x0/0xc @ 1
initcall td_init+0x0/0xc returned 0 after 15 usecs
calling ib_core_init+0x0/0x6c @ 1
initcall ib_core_init+0x0/0x6c returned 0 after 19 usecs
calling ib_mad_init_module+0x0/0xcc @ 1
initcall ib_mad_init_module+0x0/0xcc returned 0 after 81 usecs
calling ib_sa_init+0x0/0x5d @ 1
initcall ib_sa_init+0x0/0x5d returned 0 after 38 usecs
calling ib_cm_init+0x0/0xfa @ 1
initcall ib_cm_init+0x0/0xfa returned 0 after 71 usecs
calling iw_cm_init+0x0/0x2e @ 1
initcall iw_cm_init+0x0/0x2e returned 0 after 24 usecs
calling addr_init+0x0/0x3f @ 1
initcall addr_init+0x0/0x3f returned 0 after 24 usecs
calling cma_init+0x0/0x97 @ 1
initcall cma_init+0x0/0x97 returned 0 after 28 usecs
calling ib_uverbs_init+0x0/0xc1 @ 1
initcall ib_uverbs_init+0x0/0xc1 returned 0 after 12 usecs
calling ib_ucm_init+0x0/0x9c @ 1
initcall ib_ucm_init+0x0/0x9c returned 0 after 2 usecs
calling ucma_init+0x0/0x8f @ 1
initcall ucma_init+0x0/0x8f returned 0 after 82 usecs
calling mlx4_ib_init+0x0/0x4f @ 1
initcall mlx4_ib_init+0x0/0x4f returned 0 after 27 usecs
calling ipoib_init_module+0x0/0x103 @ 1
initcall ipoib_init_module+0x0/0x103 returned 0 after 32 usecs
calling iser_init+0x0/0x11d @ 1
iscsi: registered transport (iser)
initcall iser_init+0x0/0x11d returned 0 after 3115 usecs
calling dcdrbu_init+0x0/0x151 @ 1
initcall dcdrbu_init+0x0/0x151 returned 0 after 28 usecs
calling hid_init+0x0/0x5c @ 1
initcall hid_init+0x0/0x5c returned 0 after 36 usecs
calling usb_mouse_init+0x0/0x2e @ 1
usbcore: registered new interface driver usbmouse
usbmouse: v1.6:USB HID Boot Protocol mouse driver
initcall usb_mouse_init+0x0/0x2e returned 0 after 8710 usecs
calling cmpc_init+0x0/0x88 @ 1
initcall cmpc_init+0x0/0x88 returned 0 after 99 usecs
calling dell_wmi_init+0x0/0x1b1 @ 1
dell-wmi: No known WMI GUID found
initcall dell_wmi_init+0x0/0x1b1 returned -19 after 2987 usecs
calling dell_wmi_aio_init+0x0/0xfe @ 1
dell_wmi_aio: No known WMI GUID found
initcall dell_wmi_aio_init+0x0/0xfe returned -6 after 3324 usecs
initcall dell_wmi_aio_init+0x0/0xfe returned with error code -6
calling hdaps_init+0x0/0x1f9 @ 1
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
initcall hdaps_init+0x0/0x1f9 returned -19 after 6322 usecs
calling fujitsu_init+0x0/0x25b @ 1
fujitsu-laptop: driver 0.6.0 successfully loaded.
initcall fujitsu_init+0x0/0x25b returned 0 after 4427 usecs
calling acpi_pcc_init+0x0/0x23 @ 1
initcall acpi_pcc_init+0x0/0x23 returned 0 after 24 usecs
calling msi_wmi_init+0x0/0x179 @ 1
This machine doesn't have MSI-hotkeys through WMI
initcall msi_wmi_init+0x0/0x179 returned -19 after 4332 usecs
calling asus_acpi_init+0x0/0xf1 @ 1
initcall asus_acpi_init+0x0/0xf1 returned -19 after 33 usecs
calling ips_init+0x0/0x15 @ 1
initcall ips_init+0x0/0x15 returned 0 after 34 usecs
calling xo15_ebook_init+0x0/0xc @ 1
initcall xo15_ebook_init+0x0/0xc returned 0 after 23 usecs
calling flow_cache_init_global+0x0/0x120 @ 1
initcall flow_cache_init_global+0x0/0x120 returned 0 after 32 usecs
calling pg_init+0x0/0x316 @ 1
pktgen: Packet Generator for packet performance testing. Version: 2.74
initcall pg_init+0x0/0x316 returned 0 after 6183 usecs
calling llc_init+0x0/0x1d @ 1
initcall llc_init+0x0/0x1d returned 0 after 2 usecs
calling llc2_init+0x0/0xc2 @ 1
NET: Registered protocol family 26
initcall llc2_init+0x0/0xc2 returned 0 after 3098 usecs
calling snap_init+0x0/0x36 @ 1
initcall snap_init+0x0/0x36 returned 0 after 3 usecs
calling rif_init+0x0/0x81 @ 1
initcall rif_init+0x0/0x81 returned 0 after 10 usecs
calling blackhole_module_init+0x0/0xc @ 1
initcall blackhole_module_init+0x0/0xc returned 0 after 2 usecs
calling police_init_module+0x0/0xc @ 1
initcall police_init_module+0x0/0xc returned 0 after 1 usecs
calling mirred_init_module+0x0/0x2f @ 1
Mirror/redirect action on
initcall mirred_init_module+0x0/0x2f returned 0 after 2309 usecs
calling nat_init_module+0x0/0xc @ 1
initcall nat_init_module+0x0/0xc returned 0 after 1 usecs
calling pedit_init_module+0x0/0xc @ 1
initcall pedit_init_module+0x0/0xc returned 0 after 1 usecs
calling simp_init_module+0x0/0x25 @ 1
Simple TC action Loaded
initcall simp_init_module+0x0/0x25 returned 0 after 2132 usecs
calling cbq_module_init+0x0/0xc @ 1
initcall cbq_module_init+0x0/0xc returned 0 after 1 usecs
calling htb_module_init+0x0/0xc @ 1
initcall htb_module_init+0x0/0xc returned 0 after 1 usecs
calling gred_module_init+0x0/0xc @ 1
initcall gred_module_init+0x0/0xc returned 0 after 1 usecs
calling dsmark_module_init+0x0/0xc @ 1
initcall dsmark_module_init+0x0/0xc returned 0 after 1 usecs
calling sfb_module_init+0x0/0xc @ 1
initcall sfb_module_init+0x0/0xc returned 0 after 1 usecs
calling sfq_module_init+0x0/0xc @ 1
initcall sfq_module_init+0x0/0xc returned 0 after 1 usecs
calling atm_init+0x0/0xc @ 1
initcall atm_init+0x0/0xc returned 0 after 1 usecs
calling choke_module_init+0x0/0xc @ 1
initcall choke_module_init+0x0/0xc returned 0 after 1 usecs
calling init_fw+0x0/0xc @ 1
initcall init_fw+0x0/0xc returned 0 after 1 usecs
calling init_tcindex+0x0/0xc @ 1
initcall init_tcindex+0x0/0xc returned 0 after 1 usecs
calling init_rsvp+0x0/0xc @ 1
initcall init_rsvp+0x0/0xc returned 0 after 1 usecs
calling init_basic+0x0/0xc @ 1
initcall init_basic+0x0/0xc returned 0 after 1 usecs
calling cls_flow_init+0x0/0xc @ 1
initcall cls_flow_init+0x0/0xc returned 0 after 1 usecs
calling nf_conntrack_standalone_init+0x0/0xc @ 1
nf_conntrack version 0.5.0 (7948 buckets, 31792 max)
initcall nf_conntrack_standalone_init+0x0/0xc returned 0 after 4786 usecs
calling nf_conntrack_proto_dccp_init+0x0/0x65 @ 1
initcall nf_conntrack_proto_dccp_init+0x0/0x65 returned 0 after 54 usecs
calling nf_ct_proto_gre_init+0x0/0x3d @ 1
initcall nf_ct_proto_gre_init+0x0/0x3d returned 0 after 2 usecs
calling nf_conntrack_h323_init+0x0/0xe5 @ 1
initcall nf_conntrack_h323_init+0x0/0xe5 returned 0 after 3 usecs
calling nf_conntrack_irc_init+0x0/0x16e @ 1
initcall nf_conntrack_irc_init+0x0/0x16e returned 0 after 3 usecs
calling nf_conntrack_netbios_ns_init+0x0/0x18 @ 1
initcall nf_conntrack_netbios_ns_init+0x0/0x18 returned 0 after 1 usecs
calling nf_conntrack_snmp_init+0x0/0x18 @ 1
initcall nf_conntrack_snmp_init+0x0/0x18 returned 0 after 1 usecs
calling nf_conntrack_pptp_init+0x0/0x3d @ 1
initcall nf_conntrack_pptp_init+0x0/0x3d returned 0 after 1 usecs
calling nf_conntrack_sip_init+0x0/0x1ee @ 1
initcall nf_conntrack_sip_init+0x0/0x1ee returned 0 after 2 usecs
calling nf_conntrack_tftp_init+0x0/0x169 @ 1
initcall nf_conntrack_tftp_init+0x0/0x169 returned 0 after 2 usecs
calling sysctl_ipv4_init+0x0/0x7d @ 1
initcall sysctl_ipv4_init+0x0/0x7d returned 0 after 380 usecs
calling ah4_init+0x0/0x65 @ 1
initcall ah4_init+0x0/0x65 returned 0 after 2 usecs
calling esp4_init+0x0/0x65 @ 1
initcall esp4_init+0x0/0x65 returned 0 after 1 usecs
calling ipcomp4_init+0x0/0x65 @ 1
initcall ipcomp4_init+0x0/0x65 returned 0 after 1 usecs
calling ipip_init+0x0/0x65 @ 1
initcall ipip_init+0x0/0x65 returned 0 after 2 usecs
calling xfrm4_beet_init+0x0/0x11 @ 1
initcall xfrm4_beet_init+0x0/0x11 returned 0 after 1 usecs
calling tunnel4_init+0x0/0x2f @ 1
initcall tunnel4_init+0x0/0x2f returned 0 after 1 usecs
calling xfrm4_transport_init+0x0/0x11 @ 1
initcall xfrm4_transport_init+0x0/0x11 returned 0 after 1 usecs
calling xfrm4_mode_tunnel_init+0x0/0x11 @ 1
initcall xfrm4_mode_tunnel_init+0x0/0x11 returned 0 after 1 usecs
calling ipv4_netfilter_init+0x0/0xc @ 1
initcall ipv4_netfilter_init+0x0/0xc returned 0 after 2 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x141 @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x141 returned 0 after 249 usecs
calling nf_defrag_init+0x0/0x11 @ 1
initcall nf_defrag_init+0x0/0x11 returned 0 after 1 usecs
calling ip_queue_init+0x0/0x130 @ 1
initcall ip_queue_init+0x0/0x130 returned 0 after 19 usecs
calling inet_diag_init+0x0/0x6d @ 1
initcall inet_diag_init+0x0/0x6d returned 0 after 3 usecs
calling tcp_diag_init+0x0/0xc @ 1
initcall tcp_diag_init+0x0/0xc returned 0 after 1 usecs
calling cubictcp_register+0x0/0x64 @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x64 returned 0 after 1879 usecs
calling xfrm_user_init+0x0/0x4b @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4b returned 0 after 2899 usecs
calling packet_init+0x0/0x3d @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x3d returned 0 after 3068 usecs
calling br_init+0x0/0xab @ 1
Bridge firewalling registered
initcall br_init+0x0/0xab returned 0 after 2693 usecs
calling ipx_init+0x0/0xf0 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xf0 returned 0 after 23897 usecs
calling x25_init+0x0/0x89 @ 1
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x89 returned 0 after 5408 usecs
calling atm_clip_init+0x0/0xac @ 1
initcall atm_clip_init+0x0/0xac returned 0 after 21 usecs
calling br2684_init+0x0/0x48 @ 1
initcall br2684_init+0x0/0x48 returned 0 after 2 usecs
calling l2tp_init+0x0/0x2c @ 1
L2TP core driver, V2.0
initcall l2tp_init+0x0/0x2c returned 0 after 2056 usecs
pps pps0: PPS event at 1301443290.500016191
pps pps0: capture assert seq #1
calling l2tp_nl_init+0x0/0x28 @ 1
L2TP netlink interface
initcall l2tp_nl_init+0x0/0x28 returned 0 after 2056 usecs
calling sctp_init+0x0/0x72f @ 1
sctp: Hash tables configured (established 65536 bind 65536)
sctp: sctp_init_sock(sk: ffff88003cc30000)
initcall sctp_init+0x0/0x72f returned 0 after 10423 usecs
calling rds_init+0x0/0xac @ 1
NET: Registered protocol family 21
initcall rds_init+0x0/0xac returned 0 after 3268 usecs
calling caif_device_init+0x0/0x73 @ 1
initcall caif_device_init+0x0/0x73 returned 0 after 11 usecs
calling caif_sktinit_module+0x0/0x164 @ 1
NET: Registered protocol family 37
initcall caif_sktinit_module+0x0/0x164 returned 0 after 3097 usecs
calling dcbnl_init+0x0/0x44 @ 1
initcall dcbnl_init+0x0/0x44 returned 0 after 1 usecs
calling af_ieee802154_init+0x0/0x7d @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x7d returned 0 after 3089 usecs
calling rio_init_mports+0x0/0x58 @ 1
initcall rio_init_mports+0x0/0x58 returned 0 after 2 usecs
calling hpet_insert_resource+0x0/0x1e @ 1
initcall hpet_insert_resource+0x0/0x1e returned 1 after 1 usecs
initcall hpet_insert_resource+0x0/0x1e returned with error code 1
calling update_mp_table+0x0/0x405 @ 1
initcall update_mp_table+0x0/0x405 returned 0 after 1 usecs
calling lapic_insert_resource+0x0/0x3e @ 1
initcall lapic_insert_resource+0x0/0x3e returned 0 after 3 usecs
calling io_apic_bug_finalize+0x0/0x16 @ 1
initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 1 usecs
calling check_early_ioremap_leak+0x0/0x4d @ 1
initcall check_early_ioremap_leak+0x0/0x4d returned 0 after 1 usecs
calling pat_memtype_list_init+0x0/0x31 @ 1
initcall pat_memtype_list_init+0x0/0x31 returned 0 after 1 usecs
calling init_oops_id+0x0/0x2e @ 1
initcall init_oops_id+0x0/0x2e returned 0 after 4 usecs
calling printk_late_init+0x0/0x46 @ 1
initcall printk_late_init+0x0/0x46 returned 0 after 3 usecs
calling pm_qos_power_init+0x0/0xc0 @ 1
initcall pm_qos_power_init+0x0/0xc0 returned 0 after 230 usecs
calling taskstats_init+0x0/0x8e @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x8e returned 0 after 2732 usecs
calling max_swapfiles_check+0x0/0x3 @ 1
initcall max_swapfiles_check+0x0/0x3 returned 0 after 1 usecs
calling set_recommended_min_free_kbytes+0x0/0x78 @ 1
initcall set_recommended_min_free_kbytes+0x0/0x78 returned 0 after 34 usecs
calling init_ima+0x0/0x12 @ 1
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x12 returned 0 after 4121 usecs
calling random32_reseed+0x0/0xa2 @ 1
initcall random32_reseed+0x0/0xa2 returned 0 after 10 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x13 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x13 returned 0 after 3 usecs
calling pci_sysfs_init+0x0/0x4e @ 1
initcall pci_sysfs_init+0x0/0x4e returned 0 after 253 usecs
calling regulator_init_complete+0x0/0x125 @ 1
initcall regulator_init_complete+0x0/0x125 returned 0 after 2 usecs
calling seqgen_init+0x0/0xc @ 1
initcall seqgen_init+0x0/0xc returned 0 after 13 usecs
calling wl1273_core_init+0x0/0x27 @ 1
initcall wl1273_core_init+0x0/0x27 returned 0 after 23 usecs
calling scsi_complete_async_scans+0x0/0x12a @ 1
initcall scsi_complete_async_scans+0x0/0x12a returned 0 after 1 usecs
calling edd_init+0x0/0x269 @ 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
initcall edd_init+0x0/0x269 returned 0 after 4618 usecs
calling memmap_init+0x0/0x31 @ 1
initcall memmap_init+0x0/0x31 returned 0 after 21 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x5a @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x5a returned 0 after 2 usecs
calling tcp_congestion_default+0x0/0xc @ 1
initcall tcp_congestion_default+0x0/0xc returned 0 after 2 usecs
calling ip_auto_config+0x0/0xcb3 @ 1
initcall ip_auto_config+0x0/0xcb3 returned 0 after 10 usecs
calling initialize_hashrnd+0x0/0x16 @ 1
initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
async_waiting @ 1
async_continuing @ 1 after 1 usec
EXT3-fs (sda6): recovery required on readonly filesystem
EXT3-fs (sda6): write access will be enabled during recovery
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): recovery complete
EXT3-fs (sda6): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
async_waiting @ 1
async_continuing @ 1 after 1 usec
Freeing unused kernel memory: 548k freed
pps pps0: PPS event at 1301443291.500017867
pps pps0: capture assert seq #2
pps pps0: PPS event at 1301443292.500018984
pps pps0: capture assert seq #3
udevd (168): /proc/168/oom_adj is deprecated, please use /proc/168/oom_score_adj instead.
pps pps0: PPS event at 1301436094.565830700
pps pps0: capture assert seq #4
pps pps0: PPS event at 1301436095.565818687
On 2011-03-29 13:17, Ingo Molnar wrote:
>
> FYI, i'm seeing a new block IO related boot failure. It starts by the kernel spewing:
>
> [ 84.434778] blk: request botched
> [ 84.437546] blk: request botched
> [ 84.441532] blk: request botched
>
> And after more dying noises, a colorful kernel crash in an apparently rarely
> excercised error handler:
I don't think it's the error handler being broken, it simply looks like
a request that is in a bad bad state thus causing the normal rq -> bio
-> bvec run through to bomb out.
So the 'request botched' is the real BUG here.
Is that part reproducible? If so, can you please try with this patch?
diff --git a/block/blk-core.c b/block/blk-core.c
index e0a0623..3045d0e 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2163,7 +2163,8 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
* size, something has gone terribly wrong.
*/
if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
- printk(KERN_ERR "blk: request botched\n");
+ blk_dump_rq_flags(req, "request botched");
+ WARN_ON(1);
req->__data_len = blk_rq_cur_bytes(req);
}
--
Jens Axboe
On Tue, Mar 29, 2011 at 08:34:02AM +0200, Jens Axboe wrote:
> On 2011-03-29 01:06, Linus Torvalds wrote:
> > On Sat, Mar 26, 2011 at 11:56 AM, Jens Axboe <[email protected]> wrote:
> >> Hi Linus,
> >>
> >> This is the pull request for the block driver updates for 2.6.39. Two
> >> things here:
> >>
> >> - Big drbd update, as per usual...
> >> - cciss update.
> >
> > Btw, that cciss thing causes a very annoying compiler warning:
> >
> > drivers/block/cciss.c: In function ‘dev_show_unique_id’:
> > drivers/block/cciss.c:617:7: warning: ‘sn[0]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[1]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[2]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[3]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[4]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[5]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[6]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[7]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[8]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[9]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[10]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[11]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[12]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[13]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[14]’ may be used
> > uninitialized in this function
> > drivers/block/cciss.c:617:7: warning: ‘sn[15]’ may be used
> > uninitialized in this function
> >
> > which is because the compiler doesn't really notice that those things
> > are only used if the error return isn't being set.
> >
> > So it's a compiler mis-feature, but the thing is, the warning could
> > easily be avoided by just writing the code more prettily.
> >
> > Just do the memcpy() unconditionally: we know that 'drv' is a valid
> > pointer (we just loaded 'h' off it), and we're talking about a nice
> > constant 16-byte copy.
> >
> > IOW, a patch something like the attached.
> >
> > Untested, but it looks really obvious. Hmm?
>
> Looks good to me. I'm curious, you get a warning in dev_show_unique_id()
> but not in dev_show_vendor() or any of the other following 4-5 functions
> written in the same style?
>
> My gcc here does not warn for any of them. But it is very convoluted for
> what it does
Looks ok to me.
FWIW, I've also not seen warnings for any of those from gcc on several
distros (rhel5, rhel6, sles10, sles11).
The convolutedness was probably just me trying to be overly economical
though that "else" after the return and just before the snprintf is
kinda nuts.
-- steve