2023-06-01 07:25:15

by Komal Bajaj

[permalink] [raw]
Subject: [PATCH v4 3/4] arm64: dts: qcom: qdu1000: Add SDHCI pin configuration to DTSI

Add required pins for SDHCI, so that the interface can work reliably.

Signed-off-by: Komal Bajaj <[email protected]>
---
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 6df07334f1d3..9f615f3368c2 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1147,6 +1147,56 @@
pins = "gpio31";
function = "gpio";
};
+
+ sdc_on_state: sdc-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc_off_state: sdc-off-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
};

apps_smmu: iommu@15000000 {
--
2.17.1



2023-06-01 08:31:09

by Konrad Dybcio

[permalink] [raw]
Subject: Re: [PATCH v4 3/4] arm64: dts: qcom: qdu1000: Add SDHCI pin configuration to DTSI



On 1.06.2023 08:58, Komal Bajaj wrote:
> Add required pins for SDHCI, so that the interface can work reliably.
>
> Signed-off-by: Komal Bajaj <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>

Konrad
> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 6df07334f1d3..9f615f3368c2 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1147,6 +1147,56 @@
> pins = "gpio31";
> function = "gpio";
> };
> +
> + sdc_on_state: sdc-on-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc_off_state: sdc-off-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> };
>
> apps_smmu: iommu@15000000 {
> --
> 2.17.1
>