Hi all,
I test a scenario that will cause the difference of inode blocks
between client and host, the scenario as follows:
Precondition:
1) use VirtFS(virtio-9p) to connect guest and host.
2) 9p dir in guest is /mnt/9p, host is /9p-host.
3) server fs is ext4 and block size is 4096.
Test steps:
1) on the client(guest)
# touch /mnt/9p/test/file
# dd if=/dev/zero of=/mnt/9p/test/file bs=1 count=1043456 seek=1302528 conv=notrunc
2) on the client(guest)
# stat /mnt/9p/test/file
the file's blocks is 4582 blocks(block size is 512)
3) on the server(host)
# stat /9p-host/test/file
the file's blocks is 2040 blocks(block size is 512)
Cause analysis:
Because the file is sparse file, so in function v9fs_write_end will
update inode blocks according to difference between last_pos and
inode_size, only when last_pos is larger than the inode_size, then it
update the blocks and inode_size, the operation is not fit the sparse
file.
Currently I want to call v9fs_invalidate_inode_attr to invalidate inode,
but it will influence the performance, so I don't have a good solution.
Please advise. Thanks in advance!
Best regards,
Yiwen
From 1584733870607596541@xxx Wed Nov 22 03:06:30 +0000 2017
X-GM-THRID: 1584732609630067587
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread