Registers of DSPI should not be accessed before enabling its clock. On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:
Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
Internal error: : 1c06 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
[<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
[<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
[<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
[<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
[<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
[<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
[<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
[<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
[<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
[<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
[<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
[<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
[<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
Cc: <[email protected]>
Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index ff7456be9d6d..89a1e7a4fe5d 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev)
}
}
+ dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+ if (IS_ERR(dspi->clk)) {
+ ret = PTR_ERR(dspi->clk);
+ dev_err(&pdev->dev, "unable to get clock\n");
+ goto out_master_put;
+ }
+ ret = clk_prepare_enable(dspi->clk);
+ if (ret)
+ goto out_master_put;
+
dspi_init(dspi);
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq < 0) {
dev_err(&pdev->dev, "can't get platform irq\n");
ret = dspi->irq;
- goto out_master_put;
+ goto out_clk_put;
}
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
pdev->name, dspi);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
- goto out_master_put;
- }
-
- dspi->clk = devm_clk_get(&pdev->dev, "dspi");
- if (IS_ERR(dspi->clk)) {
- ret = PTR_ERR(dspi->clk);
- dev_err(&pdev->dev, "unable to get clock\n");
- goto out_master_put;
+ goto out_clk_put;
}
- ret = clk_prepare_enable(dspi->clk);
- if (ret)
- goto out_master_put;
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
ret = dspi_request_dma(dspi, res->start);
--
2.7.4
The patch
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From d8ffee2f551a627ffb7b216e2da322cb9a037f77 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <[email protected]>
Date: Fri, 29 Jun 2018 13:33:09 +0200
Subject: [PATCH] spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe
Registers of DSPI should not be accessed before enabling its clock. On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:
Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
Internal error: : 1c06 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
[<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
[<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
[<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
[<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
[<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
[<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
[<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
[<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
[<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
[<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
[<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
[<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
[<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
Cc: <[email protected]>
Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index ff7456be9d6d..89a1e7a4fe5d 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev)
}
}
+ dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+ if (IS_ERR(dspi->clk)) {
+ ret = PTR_ERR(dspi->clk);
+ dev_err(&pdev->dev, "unable to get clock\n");
+ goto out_master_put;
+ }
+ ret = clk_prepare_enable(dspi->clk);
+ if (ret)
+ goto out_master_put;
+
dspi_init(dspi);
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq < 0) {
dev_err(&pdev->dev, "can't get platform irq\n");
ret = dspi->irq;
- goto out_master_put;
+ goto out_clk_put;
}
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
pdev->name, dspi);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
- goto out_master_put;
- }
-
- dspi->clk = devm_clk_get(&pdev->dev, "dspi");
- if (IS_ERR(dspi->clk)) {
- ret = PTR_ERR(dspi->clk);
- dev_err(&pdev->dev, "unable to get clock\n");
- goto out_master_put;
+ goto out_clk_put;
}
- ret = clk_prepare_enable(dspi->clk);
- if (ret)
- goto out_master_put;
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
ret = dspi_request_dma(dspi, res->start);
--
2.18.0.rc2
On 29.06.2018 13:33, Krzysztof Kozlowski wrote:
> Registers of DSPI should not be accessed before enabling its clock. On
> Toradex Colibri VF50 on Iris carrier board this could be seen during
> bootup as imprecise abort:
>
> Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
> Internal error: : 1c06 [#1] ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
> Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
> Backtrace:
> [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
> [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
> [<80401028>] (platform_drv_probe) from [<803ff53c>]
> (driver_probe_device+0x280/0x2f8)
> [<803ff2bc>] (driver_probe_device) from [<803ff674>]
> (__driver_attach+0xc0/0xc4)
> [<803ff5b4>] (__driver_attach) from [<803fd818>]
> (bus_for_each_dev+0x70/0xa4)
> [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
> [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
> [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
> [<803fff68>] (driver_register) from [<80400fdc>]
> (__platform_driver_register+0x48/0x50)
> [<80400f94>] (__platform_driver_register) from [<8091cf7c>]
> (fsl_dspi_driver_init+0x1c/0x20)
> [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>]
> (do_one_initcall+0x4c/0x174)
> [<80101910>] (do_one_initcall) from [<80900e8c>]
> (kernel_init_freeable+0x144/0x1d8)
> [<80900d48>] (kernel_init_freeable) from [<805ff6a8>]
> (kernel_init+0x10/0x114)
> [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)
>
> Cc: <[email protected]>
> Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt")
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Up until commit d2233325e5b7 ("spi: spi-fsl-dspi: remove clk reference
when regmap_mmio initialize") regmap with clocks has been used. I guess
an alternative would have been to use this again, but I guess this has
been dropped for good reasons.
--
Stefan
> ---
> drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index ff7456be9d6d..89a1e7a4fe5d 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -1071,30 +1071,30 @@ static int dspi_probe(struct platform_device *pdev)
> }
> }
>
> + dspi->clk = devm_clk_get(&pdev->dev, "dspi");
> + if (IS_ERR(dspi->clk)) {
> + ret = PTR_ERR(dspi->clk);
> + dev_err(&pdev->dev, "unable to get clock\n");
> + goto out_master_put;
> + }
> + ret = clk_prepare_enable(dspi->clk);
> + if (ret)
> + goto out_master_put;
> +
> dspi_init(dspi);
> dspi->irq = platform_get_irq(pdev, 0);
> if (dspi->irq < 0) {
> dev_err(&pdev->dev, "can't get platform irq\n");
> ret = dspi->irq;
> - goto out_master_put;
> + goto out_clk_put;
> }
>
> ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
> pdev->name, dspi);
> if (ret < 0) {
> dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
> - goto out_master_put;
> - }
> -
> - dspi->clk = devm_clk_get(&pdev->dev, "dspi");
> - if (IS_ERR(dspi->clk)) {
> - ret = PTR_ERR(dspi->clk);
> - dev_err(&pdev->dev, "unable to get clock\n");
> - goto out_master_put;
> + goto out_clk_put;
> }
> - ret = clk_prepare_enable(dspi->clk);
> - if (ret)
> - goto out_master_put;
>
> if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
> ret = dspi_request_dma(dspi, res->start);