2020-08-24 19:17:11

by Sowjanya Komatineni

[permalink] [raw]
Subject: [PATCH v4 3/7] dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later

Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.

So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.

Signed-off-by: Sowjanya Komatineni <[email protected]>
---
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 +++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 2cf3aff..9603d05 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -17,6 +17,8 @@ Required properties:
- "nvidia,tegra194-sdhci": for Tegra194
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
+ Must also contain "tmclk" entry for Tegra210, Tegra186, and Tegra194.
+ Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@@ -99,7 +101,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:

Example:
sdhci@700b0000 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +117,22 @@ sdhci@700b0000 {
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};
+
+sdhci@700b0000 {
+ compatible = "nvidia,tegra210-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ status = "disabled";
+};
--
2.7.4


2020-08-25 09:01:10

by Jon Hunter

[permalink] [raw]
Subject: Re: [PATCH v4 3/7] dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later


On 24/08/2020 20:15, Sowjanya Komatineni wrote:
> Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
> timeout.
>
> So, this patch adds "tmclk" to Tegra sdhci clock property in the
> device tree binding.
>
> Signed-off-by: Sowjanya Komatineni <[email protected]>
> ---
> .../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 +++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> index 2cf3aff..9603d05 100644
> --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> @@ -17,6 +17,8 @@ Required properties:
> - "nvidia,tegra194-sdhci": for Tegra194
> - clocks : Must contain one entry, for the module clock.
> See ../clocks/clock-bindings.txt for details.
> + Must also contain "tmclk" entry for Tegra210, Tegra186, and Tegra194.
> + Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout.

Maybe we should make this a bit clearer ...

- clocks : For Tegra210, Tegra186 and Tegra194 must contain two entries;
one for the module clock and one for the timeout clock. For
all other Tegra devices, must contain a single entry for the
module clock. See ../clocks/clock-bindings.txt for details.
- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
strings 'sdhci' and 'tmclk' to represent the module and
timeout clocks, respectively. For all other Tegra devices
must contain the string 'sdhci' to represent the module
clock.

Cheers
Jon

--
nvpublic