This is part 3 of at803x required patches to split the PHY driver
in more specific PHY Family driver.
While adding support for a new PHY Family qca807x it was notice lots
of similarities with the qca808x cdt function. Hence this series
is done to make things easier in the future when qca807x PHY will be
submitted.
Changes v2:
- Address request from Russell in a previous series on cdt get
status improvement
Christian Marangi (4):
net: phy: at803x: generalize cdt fault length function
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: make read_status more generic
drivers/net/phy/at803x.c | 171 ++++++++++++++++++++++++++-------------
1 file changed, 116 insertions(+), 55 deletions(-)
--
2.43.0
Generalize cable test fault length function since they all base on the
same magic values (already reverse engineered to understand the meaning
of it) to have consistenct values on every PHY.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/at803x.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 0db653b57494..072bcd670ef0 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1259,10 +1259,8 @@ static bool at803x_cdt_fault_length_valid(u16 status)
return false;
}
-static int at803x_cdt_fault_length(u16 status)
+static int at803x_cdt_fault_length(int dt)
{
- int dt;
-
/* According to the datasheet the distance to the fault is
* DELTA_TIME * 0.824 meters.
*
@@ -1278,8 +1276,6 @@ static int at803x_cdt_fault_length(u16 status)
* With a VF of 0.69 we get the factor 0.824 mentioned in the
* datasheet.
*/
- dt = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, status);
-
return (dt * 824) / 10;
}
@@ -1332,9 +1328,11 @@ static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
ethnl_cable_test_result(phydev, ethtool_pair[pair],
at803x_cable_test_result_trans(val));
- if (at803x_cdt_fault_length_valid(val))
+ if (at803x_cdt_fault_length_valid(val)) {
+ val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
at803x_cdt_fault_length(val));
+ }
return 1;
}
@@ -2059,7 +2057,8 @@ static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
if (val < 0)
return val;
- return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
+ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val);
+ return at803x_cdt_fault_length(val);
}
static int qca808x_cable_test_start(struct phy_device *phydev)
--
2.43.0
QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair
Short.
Add all the define to make enable and support these additional tests.
Cross Short test was previously disabled by default, this is now changed
and enabled by default. In this mode, the mask changed a bit and length
is shifted based on the fault condition.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/at803x.c | 86 ++++++++++++++++++++++++++++++++--------
1 file changed, 69 insertions(+), 17 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 9610b51a5928..3d3d34ef594c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -254,6 +254,7 @@
#define QCA808X_CDT_ENABLE_TEST BIT(15)
#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
+#define QCA808X_CDT_STATUS BIT(11)
#define QCA808X_CDT_LENGTH_UNIT BIT(10)
#define QCA808X_MMD3_CDT_STATUS 0x8064
@@ -261,16 +262,44 @@
#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
-#define QCA808X_CDT_DIAG_LENGTH GENMASK(7, 0)
+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8)
+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0)
#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
-#define QCA808X_CDT_STATUS_STAT_FAIL 0
-#define QCA808X_CDT_STATUS_STAT_NORMAL 1
-#define QCA808X_CDT_STATUS_STAT_OPEN 2
-#define QCA808X_CDT_STATUS_STAT_SHORT 3
+
+#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
+#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
+
+#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
+#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
+
+/* NORMAL are MDI with type set to 0 */
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI3)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI3)
+
+/* Added for reference of existence but should be handled by wait_for_completion already */
+#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3))
#define QCA808X_MMD7_LED2_CTRL 0x8074
#define QCA808X_MMD7_LED2_FORCE_CTRL 0x8075
@@ -2008,8 +2037,17 @@ static int qca808x_soft_reset(struct phy_device *phydev)
static bool qca808x_cdt_fault_length_valid(int cdt_code)
{
switch (cdt_code) {
- case QCA808X_CDT_STATUS_STAT_SHORT:
- case QCA808X_CDT_STATUS_STAT_OPEN:
+ case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
return true;
default:
return false;
@@ -2021,17 +2059,28 @@ static int qca808x_cable_test_result_trans(int cdt_code)
switch (cdt_code) {
case QCA808X_CDT_STATUS_STAT_NORMAL:
return ETHTOOL_A_CABLE_RESULT_CODE_OK;
- case QCA808X_CDT_STATUS_STAT_SHORT:
+ case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
- case QCA808X_CDT_STATUS_STAT_OPEN:
+ case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
case QCA808X_CDT_STATUS_STAT_FAIL:
default:
return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
}
}
-static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
+ int result)
{
int val;
u32 cdt_length_reg = 0;
@@ -2057,7 +2106,11 @@ static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
if (val < 0)
return val;
- val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val);
+ if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
+ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
+ else
+ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
+
return at803x_cdt_fault_length(val);
}
@@ -2105,8 +2158,8 @@ static int qca808x_cable_test_start(struct phy_device *phydev)
static void qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
u16 status)
{
+ int length, result;
u16 pair_code;
- int length;
switch (pair) {
case ETHTOOL_A_CABLE_PAIR_A:
@@ -2123,11 +2176,11 @@ static void qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pai
break;
}
- ethnl_cable_test_result(phydev, pair,
- qca808x_cable_test_result_trans(pair_code));
+ result = qca808x_cable_test_result_trans(pair_code);
+ ethnl_cable_test_result(phydev, pair, result);
if (qca808x_cdt_fault_length_valid(pair_code)) {
- length = qca808x_cdt_fault_length(phydev, pair);
+ length = qca808x_cdt_fault_length(phydev, pair, result);
ethnl_cable_test_fault_length(phydev, pair, length);
}
}
@@ -2139,8 +2192,7 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
*finished = false;
val = QCA808X_CDT_ENABLE_TEST |
- QCA808X_CDT_LENGTH_UNIT |
- QCA808X_CDT_INTER_CHECK_DIS;
+ QCA808X_CDT_LENGTH_UNIT;
ret = at803x_cdt_start(phydev, val);
if (ret)
return ret;
--
2.43.0
Refactor qca808x cable test get status function to remove code
duplication and clean things up.
The same logic is applied to each pair hence it can be generalized and
moved to a common function.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/at803x.c | 65 +++++++++++++++++++++-------------------
1 file changed, 34 insertions(+), 31 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 072bcd670ef0..9610b51a5928 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -2102,10 +2102,39 @@ static int qca808x_cable_test_start(struct phy_device *phydev)
return 0;
}
+static void qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
+ u16 status)
+{
+ u16 pair_code;
+ int length;
+
+ switch (pair) {
+ case ETHTOOL_A_CABLE_PAIR_A:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_B:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_C:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_D:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
+ break;
+ }
+
+ ethnl_cable_test_result(phydev, pair,
+ qca808x_cable_test_result_trans(pair_code));
+
+ if (qca808x_cdt_fault_length_valid(pair_code)) {
+ length = qca808x_cdt_fault_length(phydev, pair);
+ ethnl_cable_test_fault_length(phydev, pair, length);
+ }
+}
+
static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
{
int ret, val;
- int pair_a, pair_b, pair_c, pair_d;
*finished = false;
@@ -2124,36 +2153,10 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
if (val < 0)
return val;
- pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
- pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
- pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
- pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
-
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
- qca808x_cable_test_result_trans(pair_a));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
- qca808x_cable_test_result_trans(pair_b));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
- qca808x_cable_test_result_trans(pair_c));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
- qca808x_cable_test_result_trans(pair_d));
-
- if (qca808x_cdt_fault_length_valid(pair_a)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_b)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_c)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_d)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
- }
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
*finished = true;
--
2.43.0
Make read_status more generic in preparation on moving it to shared
library as other PHY Family Driver will have the exact same
implementation.
The only specific part was a check for AR8031/33 if 1000basex was used.
The check is moved to a dedicated function specific for those PHYs.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/at803x.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 3d3d34ef594c..d52b0ec81994 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1087,13 +1087,9 @@ static int at803x_read_specific_status(struct phy_device *phydev,
static int at803x_read_status(struct phy_device *phydev)
{
- struct at803x_priv *priv = phydev->priv;
struct at803x_ss_mask ss_mask = { 0 };
int err, old_link = phydev->link;
- if (priv->is_1000basex)
- return genphy_c37_read_status(phydev);
-
/* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
if (err)
@@ -1685,6 +1681,17 @@ static int at8031_config_intr(struct phy_device *phydev)
return at803x_config_intr(phydev);
}
+/* AR8031 and AR8033 share the same read status logic */
+static int at8031_read_status(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ if (priv->is_1000basex)
+ return genphy_c37_read_status(phydev);
+
+ return at803x_read_status(phydev);
+}
+
/* AR8031 and AR8035 share the same cable test get status reg */
static int at8031_cable_test_get_status(struct phy_device *phydev,
bool *finished)
@@ -2568,7 +2575,7 @@ static struct phy_driver at803x_driver[] = {
.read_page = at803x_read_page,
.write_page = at803x_write_page,
.get_features = at803x_get_features,
- .read_status = at803x_read_status,
+ .read_status = at8031_read_status,
.config_intr = at8031_config_intr,
.handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
--
2.43.0
On Tue, 2 Jan 2024 15:03:24 +0100 Christian Marangi wrote:
> This is part 3 of at803x required patches to split the PHY driver
> in more specific PHY Family driver.
>
> While adding support for a new PHY Family qca807x it was notice lots
> of similarities with the qca808x cdt function. Hence this series
> is done to make things easier in the future when qca807x PHY will be
> submitted.
Does not apply..
--
pw-bot: rfc
On Tue, Jan 02, 2024 at 02:37:07PM -0800, Jakub Kicinski wrote:
> On Tue, 2 Jan 2024 15:03:24 +0100 Christian Marangi wrote:
> > This is part 3 of at803x required patches to split the PHY driver
> > in more specific PHY Family driver.
> >
> > While adding support for a new PHY Family qca807x it was notice lots
> > of similarities with the qca808x cdt function. Hence this series
> > is done to make things easier in the future when qca807x PHY will be
> > submitted.
>
> Does not apply..
Yes sorry was based on a tool old net-next branch and notice the fail on
patchwork. Was waiting the 24 hours to resend rebased.
Sorry for the noise.
--
Ansuel