From: Xiaotong Lu <[email protected]>
This patch adds the binding documentation for Spreadtrum SC27xx series
vibrator device.
Signed-off-by: Xiaotong Lu <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v3:
- Change compatible string to explicit Soc name.
- Add parent MFD node.
Changes since v2:
- No updates.
Changes since v1:
- No updates.
---
.../bindings/input/sprd,sc27xx-vibra.txt | 23 ++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
new file mode 100644
index 0000000..f2ec0d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
@@ -0,0 +1,23 @@
+Spreadtrum SC27xx PMIC Vibrator
+
+Required properties:
+- compatible: should be "sprd,sc2731-vibrator".
+- reg: address of vibrator control register.
+
+Example :
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vibrator@eb4 {
+ compatible = "sprd,sc2731-vibrator";
+ reg = <0xeb4>;
+ };
+ };
--
1.7.9.5
From: Xiaotong Lu <[email protected]>
This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Xiaotong Lu <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v3:
- No updates.
Changes since v2:
- Fix the condition when disabling the vibrator.
- Change of_property_read_u32() to device_property_read_u32().
- Correct the device parent relationship.
- Call sc27xx_vibra_hw_init() before calling input_register_device().
- Remove platform_set_drvdata().
Changes since v1:
- Remove input_ff_destroy() and input_unregister_device()
---
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sc27xx-vibra.c | 154 +++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/input/misc/sc27xx-vibra.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 572b15f..c761c0c 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
To compile this driver as a module, choose M here: the
module will be called rave-sp-pwrbutton.
+config INPUT_SC27XX_VIBRA
+ tristate "Spreadtrum sc27xx vibrator support"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for Spreadtrum sc27xx vibrator driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called sc27xx_vibra.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 72cde28..9d0f9d1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
+obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
new file mode 100644
index 0000000..295251a
--- /dev/null
+++ b/drivers/input/misc/sc27xx-vibra.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN BIT(9)
+#define LDO_VIBR_PD BIT(8)
+
+struct vibra_info {
+ struct input_dev *input_dev;
+ struct work_struct play_work;
+ struct regmap *regmap;
+ u32 base;
+ u32 strength;
+ bool enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+ if (on) {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, 0);
+ info->enabled = true;
+ } else {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+ LDO_VIBR_PD);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+ info->enabled = false;
+ }
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+ return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+ struct vibra_info *info = container_of(work, struct vibra_info,
+ play_work);
+
+ if (info->strength && !info->enabled)
+ sc27xx_vibra_set(info, true);
+ else if (info->strength == 0 && info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ info->strength = effect->u.rumble.weak_magnitude;
+ schedule_work(&info->play_work);
+
+ return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ cancel_work_sync(&info->play_work);
+ if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+ struct vibra_info *info;
+ int error;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!info->regmap) {
+ dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+ return -ENODEV;
+ }
+
+ error = device_property_read_u32(&pdev->dev, "reg", &info->base);
+ if (error) {
+ dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+ return error;
+ }
+
+ info->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!info->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ info->input_dev->name = "sc27xx:vibrator";
+ info->input_dev->id.version = 0;
+ info->input_dev->close = sc27xx_vibra_close;
+
+ input_set_drvdata(info->input_dev, info);
+ input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+ INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+ info->enabled = false;
+
+ error = sc27xx_vibra_hw_init(info);
+ if (error) {
+ dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+ return error;
+ }
+
+ error = input_ff_create_memless(info->input_dev, NULL,
+ sc27xx_vibra_play);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+ return error;
+ }
+
+ error = input_register_device(info->input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device.\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+ { .compatible = "sprd,sc2731-vibrator", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+ .driver = {
+ .name = "sc27xx-vibrator",
+ .of_match_table = sc27xx_vibra_of_match,
+ },
+ .probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <[email protected]>");
--
1.7.9.5
On Thu, May 10, 2018 at 01:08:33PM +0800, Baolin Wang wrote:
> From: Xiaotong Lu <[email protected]>
>
> This patch adds the binding documentation for Spreadtrum SC27xx series
> vibrator device.
>
> Signed-off-by: Xiaotong Lu <[email protected]>
> Signed-off-by: Baolin Wang <[email protected]>
> ---
> Changes since v3:
> - Change compatible string to explicit Soc name.
> - Add parent MFD node.
>
> Changes since v2:
> - No updates.
>
> Changes since v1:
> - No updates.
> ---
> .../bindings/input/sprd,sc27xx-vibra.txt | 23 ++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
Reviewed-by: Rob Herring <[email protected]>
On 19 May 2018 at 00:54, Rob Herring <[email protected]> wrote:
> On Thu, May 10, 2018 at 01:08:33PM +0800, Baolin Wang wrote:
>> From: Xiaotong Lu <[email protected]>
>>
>> This patch adds the binding documentation for Spreadtrum SC27xx series
>> vibrator device.
>>
>> Signed-off-by: Xiaotong Lu <[email protected]>
>> Signed-off-by: Baolin Wang <[email protected]>
>> ---
>> Changes since v3:
>> - Change compatible string to explicit Soc name.
>> - Add parent MFD node.
>>
>> Changes since v2:
>> - No updates.
>>
>> Changes since v1:
>> - No updates.
>> ---
>> .../bindings/input/sprd,sc27xx-vibra.txt | 23 ++++++++++++++++++++
>> 1 file changed, 23 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>
> Reviewed-by: Rob Herring <[email protected]>
Thanks Rob.
Hi Dmitry,
Could you apply this patch set if there are no other issues? Thanks.
--
Baolin.wang
Best Regards