Subject: [PATCH] arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus

Move the display to an aux-bus subnode of the PS8640 eDP bridge.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++++---------
1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 18e214464a2d..f9b10c7027cf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -90,18 +90,6 @@ switch-volume-up {
};
};

- panel: panel {
- compatible = "lg,lp120up1";
- power-supply = <&panel_fixed_3v3>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&ps8640_out>;
- };
- };
- };
-
panel_fixed_3v3: regulator1 {
compatible = "regulator-fixed";
regulator-name = "PANEL_3V3";
@@ -282,6 +270,20 @@ ps8640_out: endpoint {
};
};
};
+
+ aux-bus {
+ panel: panel {
+ compatible = "lg,lp120up1";
+ power-supply = <&panel_fixed_3v3>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+ };
};
};

--
2.39.0


2023-01-19 19:30:18

by Matthias Brugger

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus



On 11/01/2023 15:07, AngeloGioacchino Del Regno wrote:
> Move the display to an aux-bus subnode of the PS8640 eDP bridge.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>

Applied, thanks!

> ---
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++++---------
> 1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index 18e214464a2d..f9b10c7027cf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -90,18 +90,6 @@ switch-volume-up {
> };
> };
>
> - panel: panel {
> - compatible = "lg,lp120up1";
> - power-supply = <&panel_fixed_3v3>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&ps8640_out>;
> - };
> - };
> - };
> -
> panel_fixed_3v3: regulator1 {
> compatible = "regulator-fixed";
> regulator-name = "PANEL_3V3";
> @@ -282,6 +270,20 @@ ps8640_out: endpoint {
> };
> };
> };
> +
> + aux-bus {
> + panel: panel {
> + compatible = "lg,lp120up1";
> + power-supply = <&panel_fixed_3v3>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&ps8640_out>;
> + };
> + };
> + };
> + };
> };
> };
>