2017-07-18 19:37:45

by Florian Fainelli

Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support

Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:

* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs

Signed-off-by: Florian Fainelli <[email protected]>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..236587e7f07d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..ef263412fea5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <[email protected]>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
--
2.9.3

2017-07-24 17:41:27

by Florian Fainelli

Subject: Re: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support

On 07/18/2017 12:37 PM, Florian Fainelli wrote:
> Adds support for the Broadcom reference board BCM947189ACDMBR which
> features the following:
>
> * 128MB of DRAM
> * External MoCA support through a Broadcom BCM6802 chip
> * 1x external Gigabit PHY through the external BCM6802
> * 1x USB 2.0 port
> * 1x PCIE slot
> * Few configurable buttons and LEDs
>
> Signed-off-by: Florian Fainelli <[email protected]>

Rafal, any feedback on this?

> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
> 2 files changed, 99 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4b17f35dc9a7..236587e7f07d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm953012hr.dtb \
> bcm953012k.dtb
> dtb-$(CONFIG_ARCH_BCM_53573) += \
> - bcm47189-tenda-ac9.dtb
> + bcm47189-tenda-ac9.dtb \
> + bcm947189acdbmr.dtb
> dtb-$(CONFIG_ARCH_BCM_63XX) += \
> bcm963138dvt.dtb
> dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
> new file mode 100644
> index 000000000000..ef263412fea5
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
> @@ -0,0 +1,97 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + * Author: Florian Fainelli <[email protected]>
> + *
> + * Licensed under the ISC license.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm53573.dtsi"
> +
> +/ {
> + compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
> + model = "Broadcom BCM947189ACDBMR";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlycon";
> + };
> +
> + memory {
> + reg = <0x00000000 0x08000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + wps {
> + label = "bcm53xx:blue:wps";
> + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
> + };
> +
> + 5ghz {
> + label = "bcm53xx:blue:5ghz";
> + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
> + };
> +
> + 2ghz {
> + label = "bcm53xx:blue:2ghz";
> + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + restart {
> + label = "Reset";
> + linux,code = <KEY_RESTART>;
> + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wps {
> + label = "WPS";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + spi {
> + compatible = "spi-gpio";
> + num-chipselects = <1>;
> + gpio-sck = <&chipcommon 21 0>;
> + gpio-miso = <&chipcommon 22 0>;
> + gpio-mosi = <&chipcommon 23 0>;
> + cs-gpios = <&chipcommon 24 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* External BCM6802 MoCA chip is connected */
> + };
> +};
> +
> +&pcie0 {
> + ranges = <0x00000000 0 0 0 0 0x00100000>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + bridge@0,0,0 {
> + reg = <0x0000 0 0 0 0>;
> + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + wifi@0,1,0 {
> + reg = <0x0000 0 0 0 0>;
> + ranges = <0x00000000 0 0 0 0x00100000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +};
> +
> +&usb2 {
> + vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
> +};
>


--
Florian

2017-07-31 18:32:02

by Rafał Miłecki

Subject: Re: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support

On 2017-07-24 19:39, Florian Fainelli wrote:
> On 07/18/2017 12:37 PM, Florian Fainelli wrote:
>> Adds support for the Broadcom reference board BCM947189ACDMBR which
>> features the following:
>>
>> * 128MB of DRAM
>> * External MoCA support through a Broadcom BCM6802 chip
>> * 1x external Gigabit PHY through the external BCM6802
>> * 1x USB 2.0 port
>> * 1x PCIE slot
>> * Few configurable buttons and LEDs
>>
>> Signed-off-by: Florian Fainelli <[email protected]>
>
> Rafal, any feedback on this?

Looks good :)

2017-08-07 17:42:31

by Florian Fainelli

Subject: Re: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support

On 07/31/2017 06:46 AM, Rafał Miłecki wrote:
> On 2017-07-24 19:39, Florian Fainelli wrote:
>> On 07/18/2017 12:37 PM, Florian Fainelli wrote:
>>> Adds support for the Broadcom reference board BCM947189ACDMBR which
>>> features the following:
>>>
>>> * 128MB of DRAM
>>> * External MoCA support through a Broadcom BCM6802 chip
>>> * 1x external Gigabit PHY through the external BCM6802
>>> * 1x USB 2.0 port
>>> * 1x PCIE slot
>>> * Few configurable buttons and LEDs
>>>
>>> Signed-off-by: Florian Fainelli <[email protected]>
>>
>> Rafal, any feedback on this?
>
> Looks good :)

Applied, thanks!
--
Florian