2021-11-07 16:31:09

by Chunfeng Yun

[permalink] [raw]
Subject: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load

Add optional property nvmem-cells and nvmem-cell-names to support
software efuse load, this helps to fix the efuse bit shift issue
on mt8195 etc.

Signed-off-by: Chunfeng Yun <[email protected]>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 9e6c0f43f1c6..05ee274b4b71 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -160,6 +160,24 @@ patternProperties:
- PHY_TYPE_PCIE
- PHY_TYPE_SATA

+ nvmem-cells:
+ items:
+ - description: internal R efuse for U2 PHY or U3/PCIe PHY
+ - description: rx_imp_sel efuse for U3/PCIe PHY
+ - description: tx_imp_sel efuse for U3/PCIe PHY
+ description: |
+ Phandles to nvmem cell that contains the efuse data;
+ Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+ three items should be provided at the same time for U3/PCIe PHY,
+ when use software to load efuse;
+ If unspecified, will use hardware auto-load efuse.
+
+ nvmem-cell-names:
+ items:
+ - const: intr
+ - const: rx_imp
+ - const: tx_imp
+
# The following optional vendor properties are only for debug or HQA test
mediatek,eye-src:
description:
--
2.18.0


2021-11-12 22:42:25

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load

On Sun, 07 Nov 2021 15:56:44 +0800, Chunfeng Yun wrote:
> Add optional property nvmem-cells and nvmem-cell-names to support
> software efuse load, this helps to fix the efuse bit shift issue
> on mt8195 etc.
>
> Signed-off-by: Chunfeng Yun <[email protected]>
> ---
> .../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>

Acked-by: Rob Herring <[email protected]>

2021-11-19 17:18:40

by Srinivas Kandagatla

[permalink] [raw]
Subject: Re: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load



On 07/11/2021 07:56, Chunfeng Yun wrote:
> Add optional property nvmem-cells and nvmem-cell-names to support
> software efuse load, this helps to fix the efuse bit shift issue
> on mt8195 etc.
>
> Signed-off-by: Chunfeng Yun <[email protected]>

Applied thanks,

--srini

> ---
> .../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> index 9e6c0f43f1c6..05ee274b4b71 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> @@ -160,6 +160,24 @@ patternProperties:
> - PHY_TYPE_PCIE
> - PHY_TYPE_SATA
>
> + nvmem-cells:
> + items:
> + - description: internal R efuse for U2 PHY or U3/PCIe PHY
> + - description: rx_imp_sel efuse for U3/PCIe PHY
> + - description: tx_imp_sel efuse for U3/PCIe PHY
> + description: |
> + Phandles to nvmem cell that contains the efuse data;
> + Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
> + three items should be provided at the same time for U3/PCIe PHY,
> + when use software to load efuse;
> + If unspecified, will use hardware auto-load efuse.
> +
> + nvmem-cell-names:
> + items:
> + - const: intr
> + - const: rx_imp
> + - const: tx_imp
> +
> # The following optional vendor properties are only for debug or HQA test
> mediatek,eye-src:
> description:
>

2021-11-22 04:05:56

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load

On Sat, Nov 20, 2021 at 1:19 AM Srinivas Kandagatla
<[email protected]> wrote:
> On 07/11/2021 07:56, Chunfeng Yun wrote:
> > Add optional property nvmem-cells and nvmem-cell-names to support
> > software efuse load, this helps to fix the efuse bit shift issue
> > on mt8195 etc.
> >
> > Signed-off-by: Chunfeng Yun <[email protected]>
>
> Applied thanks,

This is a PHY DT binding change. Shouldn't it go in with patch 5, the
phy driver patch, through the PHY tree instead?

ChenYu

> --srini
>
> > ---
> > .../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > index 9e6c0f43f1c6..05ee274b4b71 100644
> > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > @@ -160,6 +160,24 @@ patternProperties:
> > - PHY_TYPE_PCIE
> > - PHY_TYPE_SATA
> >
> > + nvmem-cells:
> > + items:
> > + - description: internal R efuse for U2 PHY or U3/PCIe PHY
> > + - description: rx_imp_sel efuse for U3/PCIe PHY
> > + - description: tx_imp_sel efuse for U3/PCIe PHY
> > + description: |
> > + Phandles to nvmem cell that contains the efuse data;
> > + Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
> > + three items should be provided at the same time for U3/PCIe PHY,
> > + when use software to load efuse;
> > + If unspecified, will use hardware auto-load efuse.
> > +
> > + nvmem-cell-names:
> > + items:
> > + - const: intr
> > + - const: rx_imp
> > + - const: tx_imp
> > +
> > # The following optional vendor properties are only for debug or HQA test
> > mediatek,eye-src:
> > description:
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

2021-11-22 09:21:18

by Srinivas Kandagatla

[permalink] [raw]
Subject: Re: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load



On 22/11/2021 04:05, Chen-Yu Tsai wrote:
> On Sat, Nov 20, 2021 at 1:19 AM Srinivas Kandagatla
> <[email protected]> wrote:
>> On 07/11/2021 07:56, Chunfeng Yun wrote:
>>> Add optional property nvmem-cells and nvmem-cell-names to support
>>> software efuse load, this helps to fix the efuse bit shift issue
>>> on mt8195 etc.
>>>
>>> Signed-off-by: Chunfeng Yun <[email protected]>
>>
>> Applied thanks,
>
> This is a PHY DT binding change. Shouldn't it go in with patch 5, the
> phy driver patch, through the PHY tree instead?

That's true, this is dropped from nvmem tree now!

--srini
>
> ChenYu
>
>> --srini
>>
>>> ---
>>> .../devicetree/bindings/phy/mediatek,tphy.yaml | 18 ++++++++++++++++++
>>> 1 file changed, 18 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> index 9e6c0f43f1c6..05ee274b4b71 100644
>>> --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> @@ -160,6 +160,24 @@ patternProperties:
>>> - PHY_TYPE_PCIE
>>> - PHY_TYPE_SATA
>>>
>>> + nvmem-cells:
>>> + items:
>>> + - description: internal R efuse for U2 PHY or U3/PCIe PHY
>>> + - description: rx_imp_sel efuse for U3/PCIe PHY
>>> + - description: tx_imp_sel efuse for U3/PCIe PHY
>>> + description: |
>>> + Phandles to nvmem cell that contains the efuse data;
>>> + Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
>>> + three items should be provided at the same time for U3/PCIe PHY,
>>> + when use software to load efuse;
>>> + If unspecified, will use hardware auto-load efuse.
>>> +
>>> + nvmem-cell-names:
>>> + items:
>>> + - const: intr
>>> + - const: rx_imp
>>> + - const: tx_imp
>>> +
>>> # The following optional vendor properties are only for debug or HQA test
>>> mediatek,eye-src:
>>> description:
>>>
>>
>> _______________________________________________
>> Linux-mediatek mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-mediatek

2021-11-24 07:48:48

by Chunfeng Yun

[permalink] [raw]
Subject: Re: [PATCH 4/6] dt-bindings: phy: mediatek: tphy: support software efuse load

On Mon, 2021-11-22 at 09:21 +0000, Srinivas Kandagatla wrote:
>
> On 22/11/2021 04:05, Chen-Yu Tsai wrote:
> > On Sat, Nov 20, 2021 at 1:19 AM Srinivas Kandagatla
> > <[email protected]> wrote:
> > > On 07/11/2021 07:56, Chunfeng Yun wrote:
> > > > Add optional property nvmem-cells and nvmem-cell-names to
> > > > support
> > > > software efuse load, this helps to fix the efuse bit shift
> > > > issue
> > > > on mt8195 etc.
> > > >
> > > > Signed-off-by: Chunfeng Yun <[email protected]>
> > >
> > > Applied thanks,
> >
> > This is a PHY DT binding change. Shouldn't it go in with patch 5,
> > the
> > phy driver patch, through the PHY tree instead?
>
> That's true, this is dropped from nvmem tree now!

Thanks

>
> --srini
> >
> > ChenYu
> >
> > > --srini
> > >
> > > > ---
> > > > .../devicetree/bindings/phy/mediatek,tphy.yaml | 18
> > > > ++++++++++++++++++
> > > > 1 file changed, 18 insertions(+)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > > > b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > > > index 9e6c0f43f1c6..05ee274b4b71 100644
> > > > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > > > @@ -160,6 +160,24 @@ patternProperties:
> > > > - PHY_TYPE_PCIE
> > > > - PHY_TYPE_SATA
> > > >
> > > > + nvmem-cells:
> > > > + items:
> > > > + - description: internal R efuse for U2 PHY or
> > > > U3/PCIe PHY
> > > > + - description: rx_imp_sel efuse for U3/PCIe PHY
> > > > + - description: tx_imp_sel efuse for U3/PCIe PHY
> > > > + description: |
> > > > + Phandles to nvmem cell that contains the efuse data;
> > > > + Available only for U2 PHY or U3/PCIe PHY of version
> > > > 2/3, these
> > > > + three items should be provided at the same time for
> > > > U3/PCIe PHY,
> > > > + when use software to load efuse;
> > > > + If unspecified, will use hardware auto-load efuse.
> > > > +
> > > > + nvmem-cell-names:
> > > > + items:
> > > > + - const: intr
> > > > + - const: rx_imp
> > > > + - const: tx_imp
> > > > +
> > > > # The following optional vendor properties are only
> > > > for debug or HQA test
> > > > mediatek,eye-src:
> > > > description:
> > > >
> > >
> > > _______________________________________________
> > > Linux-mediatek mailing list
> > > [email protected]
> > > http://lists.infradead.org/mailman/listinfo/linux-mediatek