Dear Linux folks,
Am 28.07.21 um 11:38 schrieb Paul Menzel:
> From: Madhava Reddy Siddareddygari <[email protected]>
>
> PSU650W has four temperature sensors, while the pmbus driver currently
> only support three temperature sensors.
>
> So, support a fourth temp sensor, i. e. PSU outlet temperature sensor,
> by copying what is done for temperature sensor 3, and use register 0xDF.
>
> PSU650W is based on LITE-ON vendor.
> LITE-ON MFG part numbers for the PSU are PS-2651-3SB5 Z and PS-2651-3SA5 Z.
>
> Signed-off-by: Madhava Reddy Siddareddygari <[email protected]>
> Signed-off-by: Venkat Garigipati <[email protected]>
> Cc: Billie Alsup <[email protected]>
> Signed-off-by: Paul Menzel <[email protected]>
> ---
> This as a RFC, as we know 0xDF is a manufacturer specific register, and
> cannot be added to the PMBus core driver. It was submitted to SONiC [1]
> by Cisco engineers.
>
> It’d be great if the maintainers [could] suggest how to easily implement a
I meant *could* instead of *good*.
> custom driver for that PSU?
Kind regards,
Paul
> [1]: https://github.com/Azure/sonic-linux-kernel/pull/214
>
> drivers/hwmon/pmbus/pmbus.c | 4 +++-
> drivers/hwmon/pmbus/pmbus.h | 3 +++
> drivers/hwmon/pmbus/pmbus_core.c | 38 ++++++++++++++++++++++++++++++++
> 3 files changed, 44 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
> index d0d386990af5..df2a782a1105 100644
> --- a/drivers/hwmon/pmbus/pmbus.c
> +++ b/drivers/hwmon/pmbus/pmbus.c
> @@ -60,8 +60,10 @@ static void pmbus_find_sensor_groups(struct i2c_client *client,
> info->func[0] |= PMBUS_HAVE_TEMP2;
> if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3))
> info->func[0] |= PMBUS_HAVE_TEMP3;
> + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_4))
> + info->func[0] |= PMBUS_HAVE_TEMP4;
> if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
> - | PMBUS_HAVE_TEMP3)
> + | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_TEMP4)
> && pmbus_check_byte_register(client, 0,
> PMBUS_STATUS_TEMPERATURE))
> info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
> diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
> index e0aa8aa46d8c..1522c8c7cade 100644
> --- a/drivers/hwmon/pmbus/pmbus.h
> +++ b/drivers/hwmon/pmbus/pmbus.h
> @@ -135,6 +135,8 @@ enum pmbus_regs {
> PMBUS_MFR_MAX_TEMP_2 = 0xC1,
> PMBUS_MFR_MAX_TEMP_3 = 0xC2,
>
> + PMBUS_READ_TEMPERATURE_4 = 0xDF,
> +
> /*
> * Virtual registers.
> * Useful to support attributes which are not supported by standard PMBus
> @@ -401,6 +403,7 @@ enum pmbus_sensor_classes {
> #define PMBUS_HAVE_PWM12 BIT(20)
> #define PMBUS_HAVE_PWM34 BIT(21)
> #define PMBUS_HAVE_SAMPLES BIT(22)
> +#define PMBUS_HAVE_TEMP4 BIT(23)
>
> #define PMBUS_PHASE_VIRTUAL BIT(30) /* Phases on this page are virtual */
> #define PMBUS_PAGE_VIRTUAL BIT(31) /* Page is virtual */
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 776ee2237be2..b084b5ba6d45 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -1810,6 +1810,32 @@ static const struct pmbus_limit_attr temp_limit_attrs3[] = {
> },
> };
>
> +static const struct pmbus_limit_attr temp_limit_attrs4[] = {
> + {
> + .reg = PMBUS_UT_WARN_LIMIT,
> + .low = true,
> + .attr = "min",
> + .alarm = "min_alarm",
> + .sbit = PB_TEMP_UT_WARNING,
> + }, {
> + .reg = PMBUS_UT_FAULT_LIMIT,
> + .low = true,
> + .attr = "lcrit",
> + .alarm = "lcrit_alarm",
> + .sbit = PB_TEMP_UT_FAULT,
> + }, {
> + .reg = PMBUS_OT_WARN_LIMIT,
> + .attr = "max",
> + .alarm = "max_alarm",
> + .sbit = PB_TEMP_OT_WARNING,
> + }, {
> + .reg = PMBUS_OT_FAULT_LIMIT,
> + .attr = "crit",
> + .alarm = "crit_alarm",
> + .sbit = PB_TEMP_OT_FAULT,
> + }
> +};
> +
> static const struct pmbus_sensor_attr temp_attributes[] = {
> {
> .reg = PMBUS_READ_TEMPERATURE_1,
> @@ -1847,6 +1873,18 @@ static const struct pmbus_sensor_attr temp_attributes[] = {
> .gbit = PB_STATUS_TEMPERATURE,
> .limit = temp_limit_attrs3,
> .nlimit = ARRAY_SIZE(temp_limit_attrs3),
> + }, {
> + .reg = PMBUS_READ_TEMPERATURE_4,
> + .class = PSC_TEMPERATURE,
> + .paged = true,
> + .update = true,
> + .compare = true,
> + .func = PMBUS_HAVE_TEMP4,
> + .sfunc = PMBUS_HAVE_STATUS_TEMP,
> + .sbase = PB_STATUS_TEMP_BASE,
> + .gbit = PB_STATUS_TEMPERATURE,
> + .limit = temp_limit_attrs4,
> + .nlimit = ARRAY_SIZE(temp_limit_attrs4),
> }
> };
>
>