From: Thomas Pfaff <[email protected]>
While running
"while /bin/true; do setserial /dev/ttyS0 uart none;
setserial /dev/ttyS0 uart 16550A; done"
on a kernel with threaded irqs, setserial is hung after some calls.
setserial opens the device, this will install an irq handler if the uart is
not none, followed by TIOCGSERIAL and TIOCSSERIAL ioctls.
Then the device is closed. On close, synchronize_irq() is called by
serial_core.
If the close comes too fast, the irq_thread does not really start,
it is terminated immediately without going into irq_thread().
But an interrupt might already been handled by
irq_default_primary_handler(), going to __irq_wake_thread() and
incrementing threads_active.
If this happens, synchronize_irq() will hang forever, because the
irq_thread is already dead, and threads_active will never be decremented.
The fix is to make sure that the irq_thread is really started
during __setup_irq().
Signed-off-by: Thomas Pfaff <[email protected]>
---
v2-v3:
- initialize wait_for_threads waitqueue early
- be more precise about flag and function names
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 99cbdf55a8bd..f09c60393e55 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -29,12 +29,14 @@ extern struct irqaction chained_action;
* IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
* IRQTF_AFFINITY - irq thread is requested to adjust affinity
* IRQTF_FORCED_THREAD - irq action is force threaded
+ * IRQTF_READY - signals that irq thread is ready
*/
enum {
IRQTF_RUNTHREAD,
IRQTF_WARNED,
IRQTF_AFFINITY,
IRQTF_FORCED_THREAD,
+ IRQTF_READY,
};
/*
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 939d21cd55c3..02f3b5bf5145 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -407,6 +407,7 @@ static struct irq_desc *alloc_desc(int irq, int node, unsigned int flags,
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
mutex_init(&desc->request_mutex);
init_rcu_head(&desc->rcu);
+ init_waitqueue_head(&desc->wait_for_threads);
desc_set_defaults(irq, desc, node, affinity, owner);
irqd_set(&desc->irq_data, flags);
@@ -575,6 +576,7 @@ int __init early_irq_init(void)
raw_spin_lock_init(&desc[i].lock);
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
mutex_init(&desc[i].request_mutex);
+ init_waitqueue_head(&desc->wait_for_threads);
desc_set_defaults(i, &desc[i], node, NULL, NULL);
}
return arch_early_irq_init();
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f1d5a94c6c9f..4dca48506d38 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1263,6 +1263,31 @@ static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
raw_spin_unlock_irq(&desc->lock);
}
+/*
+ * Internal function to notify that irq_thread is ready
+ */
+static void irq_thread_set_ready(struct irq_desc *desc,
+ struct irqaction *action)
+{
+ set_bit(IRQTF_READY, &action->thread_flags);
+ wake_up(&desc->wait_for_threads);
+}
+
+/*
+ * Internal function to wake up irq_thread
+ * and wait until it is ready
+ */
+static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc,
+ struct irqaction *action)
+{
+ if (!action || !action->thread)
+ return;
+
+ wake_up_process(action->thread);
+ wait_event(desc->wait_for_threads,
+ test_bit(IRQTF_READY, &action->thread_flags));
+}
+
/*
* Interrupt handler thread
*/
@@ -1287,6 +1312,8 @@ static int irq_thread(void *data)
irq_thread_check_affinity(desc, action);
+ irq_thread_set_ready(desc, action);
+
while (!irq_wait_for_interrupt(action)) {
irqreturn_t action_ret;
@@ -1698,8 +1725,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
}
if (!shared) {
- init_waitqueue_head(&desc->wait_for_threads);
-
/* Setup the type (level, edge polarity) if configured: */
if (new->flags & IRQF_TRIGGER_MASK) {
ret = __irq_set_trigger(desc,
@@ -1795,14 +1820,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
irq_setup_timings(desc, new);
- /*
- * Strictly no need to wake it up, but hung_task complains
- * when no hard interrupt wakes the thread up.
- */
- if (new->thread)
- wake_up_process(new->thread);
- if (new->secondary)
- wake_up_process(new->secondary->thread);
+ wake_up_and_wait_for_irq_thread_ready(desc, new);
+ wake_up_and_wait_for_irq_thread_ready(desc, new->secondary);
register_irq_proc(irq, desc);
new->dir = NULL;
On Mon, 02 May 2022 12:28:29 +0100,
Thomas Pfaff <[email protected]> wrote:
>
> From: Thomas Pfaff <[email protected]>
>
> While running
> "while /bin/true; do setserial /dev/ttyS0 uart none;
> setserial /dev/ttyS0 uart 16550A; done"
> on a kernel with threaded irqs, setserial is hung after some calls.
>
> setserial opens the device, this will install an irq handler if the uart is
> not none, followed by TIOCGSERIAL and TIOCSSERIAL ioctls.
> Then the device is closed. On close, synchronize_irq() is called by
> serial_core.
>
> If the close comes too fast, the irq_thread does not really start,
> it is terminated immediately without going into irq_thread().
> But an interrupt might already been handled by
> irq_default_primary_handler(), going to __irq_wake_thread() and
> incrementing threads_active.
> If this happens, synchronize_irq() will hang forever, because the
> irq_thread is already dead, and threads_active will never be decremented.
>
> The fix is to make sure that the irq_thread is really started
> during __setup_irq().
>
> Signed-off-by: Thomas Pfaff <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
M.
--
Without deviation from the norm, progress is not possible.
On Tue, May 03 2022 at 00:01, Hillf Danton wrote:
> On Mon, 02 May 2022 16:28:56 +0200 Thomas Gleixner wrote:
> --- upstream/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -1258,6 +1258,7 @@ static int irq_thread(void *data)
> struct irq_desc *desc = irq_to_desc(action->irq);
> irqreturn_t (*handler_fn)(struct irq_desc *desc,
> struct irqaction *action);
> + bool waked = false;
>
> sched_set_fifo(current);
>
> @@ -1282,8 +1283,11 @@ static int irq_thread(void *data)
> irq_wake_secondary(desc, action);
>
> wake_threads_waitq(desc);
> + waked = true;
> }
>
> + if (!waked)
> + wake_threads_waitq(desc);
That's a guarantee to make desc->threads_active go negative in the case
that the thread was never woken by a hard interrupt handler. IOW, you
created a new problem which did not exist before.
The problem discussed here is not a problem in irq_thread(), it's a
problem of not reaching this function in the first place. See the on
point analysis in Thomas Pfaffs patch.
Thanks,
tglx
Hillf,
On Tue, May 03 2022 at 08:42, Hillf Danton wrote:
> On Mon, 02 May 2022 21:24:45 +0200 Thomas Gleixner wrote:
>> On Tue, May 03 2022 at 00:01, Hillf Danton wrote:
>> > + if (!waked)
>> > + wake_threads_waitq(desc);
>>
>> That's a guarantee to make desc->threads_active go negative in the case
>> that the thread was never woken by a hard interrupt handler. IOW, you
>> created a new problem which did not exist before.
>
> The count of active threads would not drop below zero with the change,
> given the comment in __irq_wake_thread(). It is incremented before
> wakeup.
There is no guarantee that the wake-up happens via __irq_wake_thread().
kthread_stop() does a wake-up too, but that obviously _cannot_ increment
the active counter because it does not know about it at all.
create_thread()
thread_fn()
woken = false;
wait_for_wakeup_or_stop() <- Stop is set, no interrupt happened
<- ergo woken == false
if (!woken)
wake_threads_waitq(desc)
atomic_dec_and_test(..) <- underflow
>> The problem discussed here is not a problem in irq_thread(), it's a
>> problem of not reaching this function in the first place. See the on
>> point analysis in Thomas Pfaffs patch.
>
> Well why is the count above zero without wakeup? IOW why is there imbalance
> in count if the irq thread never gets a CPU to run?
Look at kthread() and the condition under which threadfn() is invoked.
Thanks,
tglx
The following commit has been merged into the irq/urgent branch of tip:
Commit-ID: 8707898e22fd665bc1d7b18b809be4b56ce25bdd
Gitweb: https://git.kernel.org/tip/8707898e22fd665bc1d7b18b809be4b56ce25bdd
Author: Thomas Pfaff <[email protected]>
AuthorDate: Mon, 02 May 2022 13:28:29 +02:00
Committer: Thomas Gleixner <[email protected]>
CommitterDate: Thu, 05 May 2022 11:54:05 +02:00
genirq: Synchronize interrupt thread startup
A kernel hang can be observed when running setserial in a loop on a kernel
with force threaded interrupts. The sequence of events is:
setserial
open("/dev/ttyXXX")
request_irq()
do_stuff()
-> serial interrupt
-> wake(irq_thread)
desc->threads_active++;
close()
free_irq()
kthread_stop(irq_thread)
synchronize_irq() <- hangs because desc->threads_active != 0
The thread is created in request_irq() and woken up, but does not get on a
CPU to reach the actual thread function, which would handle the pending
wake-up. kthread_stop() sets the should stop condition which makes the
thread immediately exit, which in turn leaves the stale threads_active
count around.
This problem was introduced with commit 519cc8652b3a, which addressed a
interrupt sharing issue in the PCIe code.
Before that commit free_irq() invoked synchronize_irq(), which waits for
the hard interrupt handler and also for associated threads to complete.
To address the PCIe issue synchronize_irq() was replaced with
__synchronize_hardirq(), which only waits for the hard interrupt handler to
complete, but not for threaded handlers.
This was done under the assumption, that the interrupt thread already
reached the thread function and waits for a wake-up, which is guaranteed to
be handled before acting on the stop condition. The problematic case, that
the thread would not reach the thread function, was obviously overlooked.
Make sure that the interrupt thread is really started and reaches
thread_fn() before returning from __setup_irq().
This utilizes the existing wait queue in the interrupt descriptor. The
wait queue is unused for non-shared interrupts. For shared interrupts the
usage might cause a spurious wake-up of a waiter in synchronize_irq() or the
completion of a threaded handler might cause a spurious wake-up of the
waiter for the ready flag. Both are harmless and have no functional impact.
[ tglx: Amended changelog ]
Fixes: 519cc8652b3a ("genirq: Synchronize only with single thread on free_irq()")
Signed-off-by: Thomas Pfaff <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
---
kernel/irq/internals.h | 2 ++
kernel/irq/irqdesc.c | 2 ++
kernel/irq/manage.c | 39 +++++++++++++++++++++++++++++----------
3 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 99cbdf5..f09c603 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -29,12 +29,14 @@ extern struct irqaction chained_action;
* IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
* IRQTF_AFFINITY - irq thread is requested to adjust affinity
* IRQTF_FORCED_THREAD - irq action is force threaded
+ * IRQTF_READY - signals that irq thread is ready
*/
enum {
IRQTF_RUNTHREAD,
IRQTF_WARNED,
IRQTF_AFFINITY,
IRQTF_FORCED_THREAD,
+ IRQTF_READY,
};
/*
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 939d21c..0099b87 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -407,6 +407,7 @@ static struct irq_desc *alloc_desc(int irq, int node, unsigned int flags,
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
mutex_init(&desc->request_mutex);
init_rcu_head(&desc->rcu);
+ init_waitqueue_head(&desc->wait_for_threads);
desc_set_defaults(irq, desc, node, affinity, owner);
irqd_set(&desc->irq_data, flags);
@@ -575,6 +576,7 @@ int __init early_irq_init(void)
raw_spin_lock_init(&desc[i].lock);
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
mutex_init(&desc[i].request_mutex);
+ init_waitqueue_head(&desc[i].wait_for_threads);
desc_set_defaults(i, &desc[i], node, NULL, NULL);
}
return arch_early_irq_init();
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index c03f71d..e3e245a 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1249,6 +1249,31 @@ static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
}
/*
+ * Internal function to notify that a interrupt thread is ready.
+ */
+static void irq_thread_set_ready(struct irq_desc *desc,
+ struct irqaction *action)
+{
+ set_bit(IRQTF_READY, &action->thread_flags);
+ wake_up(&desc->wait_for_threads);
+}
+
+/*
+ * Internal function to wake up a interrupt thread and wait until it is
+ * ready.
+ */
+static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc,
+ struct irqaction *action)
+{
+ if (!action || !action->thread)
+ return;
+
+ wake_up_process(action->thread);
+ wait_event(desc->wait_for_threads,
+ test_bit(IRQTF_READY, &action->thread_flags));
+}
+
+/*
* Interrupt handler thread
*/
static int irq_thread(void *data)
@@ -1259,6 +1284,8 @@ static int irq_thread(void *data)
irqreturn_t (*handler_fn)(struct irq_desc *desc,
struct irqaction *action);
+ irq_thread_set_ready(desc, action);
+
sched_set_fifo(current);
if (force_irqthreads() && test_bit(IRQTF_FORCED_THREAD,
@@ -1683,8 +1710,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
}
if (!shared) {
- init_waitqueue_head(&desc->wait_for_threads);
-
/* Setup the type (level, edge polarity) if configured: */
if (new->flags & IRQF_TRIGGER_MASK) {
ret = __irq_set_trigger(desc,
@@ -1780,14 +1805,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
irq_setup_timings(desc, new);
- /*
- * Strictly no need to wake it up, but hung_task complains
- * when no hard interrupt wakes the thread up.
- */
- if (new->thread)
- wake_up_process(new->thread);
- if (new->secondary)
- wake_up_process(new->secondary->thread);
+ wake_up_and_wait_for_irq_thread_ready(desc, new);
+ wake_up_and_wait_for_irq_thread_ready(desc, new->secondary);
register_irq_proc(irq, desc);
new->dir = NULL;