Hi Rick!
I have been bisecting some regressions on ia64 and one problem I ran into is that
udev is causing the kernel to crash after the following change from 2019:
commit 868b104d7379e28013e9d48bdd2db25e0bdcf751
Author: Rick Edgecombe <[email protected]>
Date: Thu Apr 25 17:11:36 2019 -0700
mm/vmalloc: Add flag for freeing of special permsissions
With your patch applied, udev crashes on ia64 when trying to load modules, I'm pasting
the whole boot message sequence below.
Any idea what could cause this problem on ia64?
Thanks,
Adrian
[ 0.000000] Linux version 5.1.0-rc7+ (glaubitz@epyc) (gcc version 10.1.0 (GCC)) #26 SMP Tue Aug 11 23:43:36 CEST 2020
[ 0.000000] EFI v2.00 by HP:
[ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fde4000 SMBIOS=0x3ee7c000 HCDP=0x3fde2000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v3 at 0x3fde2000
[ 0.000000] earlycon: uart8250 at MMIO 0x0000000088033000 (options '115200n8')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003FDE4000 000028 (v02 HP )
[ 0.000000] ACPI: XSDT 0x000000003FDE402C 0000A4 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: FACP 0x000000003FDF6A08 0000F4 (v03 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: DSDT 0x000000003FDE41C8 00E566 (v01 HP rx2660 00000007 INTL 20050309)
[ 0.000000] ACPI: FACS 0x000000003FDF6B00 000040
[ 0.000000] ACPI: SPCR 0x000000003FDF6B40 000050 (v01 HP 00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 0x000000003FDF6B90 000034 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: APIC 0x000000003FDF6FB0 0000C8 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 0x000000003FDF6BC8 000050 (v04 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 0x000000003FDF6E80 000034 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 0x000000003FDF2738 0004B3 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF2BF8 000456 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF3058 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF3F18 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF4DD8 000866 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF5648 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6508 000138 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6648 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6788 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF68C8 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: Local APIC address (____ptrval____)
[ 0.000000] 4 CPUs available, 4 CPUs total
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe00000002d88e000 (21193389 bytes)
[ 0.000000] SAL 3.20: HP version 4.4
[ 0.000000] SAL Platform features:
[ 0.000000] None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0x(____ptrval____)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000001007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000001000000-0x000000003e67ffff]
[ 0.000000] node 0: [mem 0x000000003eaec000-0x000000003ee77fff]
[ 0.000000] node 0: [mem 0x000000003fc00000-0x000000003fd77fff]
[ 0.000000] node 0: [mem 0x000000003fddc000-0x000000003fddffff]
[ 0.000000] node 0: [mem 0x0000010040000000-0x000001007f1fbfff]
[ 0.000000] node 0: [mem 0x000001007f200000-0x000001007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000001007fffffff]
[ 0.000000] Normal zone: 261632 pages exceeds freesize 65535
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 127717
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc7+ root=UUID=0c24a3da-2673-4901-b95b-d5adf2643b67 ro module_ blacklist=radeon nomodeset hardened_usercopy=off nosmp
[ 0.000000] You have booted with nomodeset. This means your GPU drivers are DISABLED
[ 0.000000] Any video related functionality will be severely degraded, and you may not even be able to suspend the system prop erly
[ 0.000000] Unless you actually understand what nomodeset does, you should reboot without enabling it
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2000336K/2059792K available (15217K kernel code, 967K rwdata, 1760K rodata, 944K init, 753K bss, 59456K re served, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x60/0x1160 with crng_init=0
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=256
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 1024
[ 0.000000] ACPI: Local APIC address (____ptrval____)
[ 0.000000] GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
[ 0.000000] +/-150ppm
[ 0.000000] clocksource: itc: mask: 0xffffffffffffffff max_cycles: 0x5c0f47ad51, max_idle_ns: 440795205098 ns
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] ACPI: Core revision 20190215
[ 0.004000] Calibrating delay loop... 3182.59 BogoMIPS (lpj=6365184)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] LSM: Security Framework initializing
[ 0.020000] Yama: becoming mindful.
[ 0.020000] AppArmor: AppArmor initialized
[ 0.020000] TOMOYO Linux initialized
[ 0.020000] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.024000] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.024000] Mount-cache hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.028000] Boot processor id 0x0/0x0
[ 0.028000] SMP mode deactivated.
[ 0.028000] rcu: Hierarchical SRCU implementation.
[ 0.028000] smp: Bringing up secondary CPUs ...
[ 0.028000] smp: Brought up 1 node, 1 CPU
[ 0.028000] Total of 1 processors activated (3182.59 BogoMIPS).
[ 0.032000] devtmpfs: initialized
[ 0.032000] SMBIOS 2.4 present.
[ 0.032000] DMI: hp server rx2660 , BIOS 04.04 07 /15/2008
[ 0.036000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036000] futex hash table entries: 256 (order: 1, 32768 bytes)
[ 0.040000] NET: Registered protocol family 16
[ 0.040000] audit: initializing netlink subsys (disabled)
[ 0.040000] ACPI: bus type PCI registered
[ 0.044000] audit: type=2000 audit(1597182378.040:1): state=initialized audit_enabled=0 res=1
[ 0.044000] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[ 0.044000] ACPI: Added _OSI(Module Device)
[ 0.044000] ACPI: Added _OSI(Processor Device)
[ 0.044000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048000] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.048000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.048000] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.052000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.052000] ACPI Debug: "_INI"
[ 0.052000] ACPI Debug: "Initializing the SCRAM data struct access"
[ 0.056000] ACPI Debug: "Init of scratch RAM complete!"
[ 0.104000] ACPI: Interpreter enabled
[ 0.104000] ACPI: (supports S0 S5)
[ 0.104000] ACPI: Using IOSAPIC for interrupt routing
[ 0.128000] ACPI: Enabled 2 GPEs in block 10 to 1F
[ 0.400000] ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00])
[ 0.400000] acpi HWP0002:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.432000] PCI host bridge to bus 0000:00
[ 0.432000] pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff])
[ 0.432000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 0.432000] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
[ 0.432000] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
[ 0.436000] pci_bus 0000:00: root bus resource [bus 00]
[ 0.484000] ACPI: PCI Root Bridge [L002] (domain 0000 [bus 01])
[ 0.484000] acpi HWP0002:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.508000] PCI host bridge to bus 0000:01
[ 0.508000] pci_bus 0000:01: root bus resource [io 0x2000000-0x200ffff window] (bus address [0x0000-0xffff])
[ 0.508000] pci_bus 0000:01: root bus resource [mem 0xa0000000-0xafffffff window]
[ 0.508000] pci_bus 0000:01: root bus resource [mem 0x80204000000-0x802ffffffff window]
[ 0.512000] pci_bus 0000:01: root bus resource [bus 01]
[ 0.552000] ACPI: PCI Root Bridge [L003] (domain 0000 [bus 02-03])
[ 0.552000] acpi HPQ0002:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.560000] acpi HPQ0002:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.580000] PCI host bridge to bus 0000:02
[ 0.580000] pci_bus 0000:02: root bus resource [io 0x3000000-0x300ffff window] (bus address [0x0000-0xffff])
[ 0.580000] pci_bus 0000:02: root bus resource [mem 0xb0000000-0xbfffffff window]
[ 0.580000] pci_bus 0000:02: root bus resource [mem 0x80304000000-0x803ffffffff window]
[ 0.580000] pci_bus 0000:02: root bus resource [bus 02-03]
[ 0.612000] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.644000] ACPI: PCI Root Bridge [L004] (domain 0000 [bus 04-05])
[ 0.644000] acpi HPQ0002:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.652000] acpi HPQ0002:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.672000] PCI host bridge to bus 0000:04
[ 0.672000] pci_bus 0000:04: root bus resource [io 0x4000000-0x400ffff window] (bus address [0x0000-0xffff])
[ 0.672000] pci_bus 0000:04: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.672000] pci_bus 0000:04: root bus resource [mem 0x80404000000-0x804ffffffff window]
[ 0.676000] pci_bus 0000:04: root bus resource [bus 04-05]
[ 0.780000] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.816000] ACPI: PCI Root Bridge [L006] (domain 0000 [bus 06])
[ 0.816000] acpi HWP0002:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.852000] PCI host bridge to bus 0000:06
[ 0.852000] pci_bus 0000:06: root bus resource [io 0x5000000-0x500ffff window] (bus address [0x0000-0xffff])
[ 0.852000] pci_bus 0000:06: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.852000] pci_bus 0000:06: root bus resource [mem 0x80604000000-0x806ffffffff window]
[ 0.856000] pci_bus 0000:06: root bus resource [bus 06]
[ 0.892000] ACPI: PCI Root Bridge [L007] (domain 0000 [bus 07-08])
[ 0.892000] acpi HPQ0002:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.900000] acpi HPQ0002:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.920000] PCI host bridge to bus 0000:07
[ 0.920000] pci_bus 0000:07: root bus resource [io 0x6000000-0x600ffff window] (bus address [0x0000-0xffff])
[ 0.920000] pci_bus 0000:07: root bus resource [mem 0xf0000000-0xfdffffff window]
[ 0.920000] pci_bus 0000:07: root bus resource [mem 0x80704000000-0x807ffffffff window]
[ 0.920000] pci_bus 0000:07: root bus resource [bus 07-08]
[ 0.956000] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.972000] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[ 0.972000] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.972000] pci 0000:00:03.0: vgaarb: bridge control possible
[ 0.972000] vgaarb: loaded
[ 0.976000] pps_core: LinuxPPS API ver. 1 registered
[ 0.976000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.976000] PTP clock support registered
[ 0.976000] Registered efivars operations
[ 0.992000] IOC: zx2 2.0 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 1.024000] random: fast init done
[ 1.056000] clocksource: Switched to clocksource itc
[ 1.056000] VFS: Disk quotas dquot_6.6.0
[ 1.056000] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.056000] AppArmor: AppArmor Filesystem Enabled
[ 1.062187] pnp: PnP ACPI init
[ 1.066114] GSI 24 (level, low) -> CPU 0 (0x0000) vector 50
[ 1.126113] pnp: PnP ACPI: found 1 devices
[ 1.130114] NET: Registered protocol family 2
[ 1.130114] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 16384 bytes)
[ 1.130114] TCP established hash table entries: 16384 (order: 3, 131072 bytes)
[ 1.130114] TCP bind hash table entries: 16384 (order: 4, 262144 bytes)
[ 1.130114] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.135193] UDP hash table entries: 1024 (order: 1, 32768 bytes)
[ 1.135193] UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes)
[ 1.135193] NET: Registered protocol family 1
[ 1.139587] NET: Registered protocol family 44
[ 1.142114] GSI 17 (level, low) -> CPU 0 (0x0000) vector 51
[ 1.142114] GSI 17 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[ 1.146217] GSI 18 (level, low) -> CPU 0 (0x0000) vector 51
[ 1.150114] GSI 18 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[ 1.154114] GSI 19 (level, low) -> CPU 0 (0x0000) vector 51
[ 1.158114] GSI 19 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[ 1.158114] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.158114] Unpacking initramfs...
[ 1.758114] Freeing initrd memory: 20688kB freed
[ 1.758114] Initialise system trusted keyrings
[ 1.758114] Key type blacklist registered
[ 1.758114] workingset: timestamp_bits=38 max_order=17 bucket_order=0
[ 1.762115] zbud: loaded
[ 3.238114] alg: No test for lzo-rle (lzo-rle-generic)
[ 3.238114] alg: No test for lzo-rle (lzo-rle-scomp)
[ 3.242114] Key type asymmetric registered
[ 3.242114] Asymmetric key parser 'x509' registered
[ 3.242114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.242114] io scheduler mq-deadline registered
[ 3.246114] GSI 38 (level, low) -> CPU 0 (0x0000) vector 51
[ 3.246114] pcieport 0000:02:00.0: Signaling PME with IRQ 55
[ 3.250129] aer 0000:02:00.0:pcie002: AER enabled with IRQ 55
[ 3.254129] GSI 45 (level, low) -> CPU 0 (0x0000) vector 53
[ 3.258134] pcieport 0000:04:00.0: Signaling PME with IRQ 57
[ 3.262191] aer 0000:04:00.0:pcie002: AER enabled with IRQ 57
[ 3.266113] GSI 63 (level, low) -> CPU 0 (0x0000) vector 55
[ 3.270134] pcieport 0000:07:00.0: Signaling PME with IRQ 59
[ 3.274192] aer 0000:07:00.0:pcie002: AER enabled with IRQ 59
[ 3.278113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.278113] ACPI: Power Button [PWRF]
[ 3.278113] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.278113] ACPI: Sleep Button [SLPF]
[ 3.278113] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.278113] ACPI: Thermal Zone [THM0] (27 C)
[ 3.278113] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.303347] 00:00: ttyS0 at MMIO 0xff5e2000 (irq = 50, base_baud = 115200) is a 16550A
[ 3.306113] GSI 16 (level, low) -> CPU 0 (0x0000) vector 57
3.328169] 0000:00:01.2: ttyS1 at MMIO 0x88033000 (irq = 60, base_baud = 115200) is a 16550A
[ 3.328169] printk: console [ttyS1] enabled
[ 3.328169] printk: console [ttyS1] enabled
[ 3.328169] printk: bootconsole [uart8250] disabled
[ 3.328169] printk: bootconsole [uart8250] disabled
[ 3.328169] Linux agpgart interface v0.103
[ 3.378113] mousedev: PS/2 mouse device common for all mice
[ 3.378113] rtc-efi rtc-efi: registered as rtc0
[ 3.378113] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.378113] EFI Variables Facility v0.08 2004-May-17
[ 3.382114] NET: Registered protocol family 10
[ 3.390114] Segment Routing with IPv6
[ 3.390114] mip6: Mobile IPv6
[ 3.390114] NET: Registered protocol family 17
[ 3.390114] mpls_gso: MPLS GSO support
[ 3.390114] registered taskstats version 1
[ 3.390114] Loading compiled-in X.509 certificates
[ 3.395571] zswap: loaded using pool lzo/zbud
[ 3.395571] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.398113] rtc-efi rtc-efi: setting system clock to 2020-08-11T21:46:21 UTC (1597182381)
[ 3.398113] Freeing unused kernel memory: 944K
[ 3.398113] This architecture does not have kernel memory protection.
[ 3.402668] Run /init as init process
Loading, please wait...
Starting version 245.7-1
[ 3.610114] tg3.c:v3.137 (May 11, 2014)
[ 3.614115] GSI 29 (level, low) -> CPU 0 (0x0000) vector 58
[ 3.622115] SCSI subsystem initialized
[ 3.634116] HP HPSA Driver (v 3.4.20-125)
[ 3.634116] hpsa 0000:05:00.0: legacy board ID: 0x3234103c
[ 3.634116] hpsa 0000:05:00.0: legacy board ID: 0x3234103c
[ 3.634116] hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.658116] Fusion MPT base driver 3.04.20
[ 3.658116] Copyright (c) 1999-2008 LSI Corporation
[ 3.670115] ACPI: bus type USB registered
[ 3.670115] usbcore: registered new interface driver usbfs
[ 3.670115] usbcore: registered new interface driver hub
[ 3.674119] Fusion MPT SAS Host driver 3.04.20
[ 3.686611] GSI 27 (level, low) -> CPU 0 (0x0000) vector 59
[ 3.686611] usbcore: registered new device driver usb
[ 3.694116] mptbase: ioc0: Initiating bringup
[ 3.694116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.694116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.694116] ehci-pci: EHCI PCI platform driver
[ 3.702122] GSI 19 (level, low) -> CPU 0 (0x0000) vector 61
[ 3.702122] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 3.702122] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 3.710531] ehci-pci 0000:00:02.2: irq 53, io mem 0x88030000
[ 3.710531] hpsa 0000:05:00.0: Logical aborts not supported
[ 3.710531] hpsa 0000:05:00.0: HP SSD Smart Path aborts not supported
[ 3.726120] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 3.726120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 3.726120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.726120] usb usb1: Product: EHCI Host Controller
[ 3.726120] usb usb1: Manufacturer: Linux 5.1.0-rc7+ ehci_hcd
[ 3.730304] usb usb1: SerialNumber: 0000:00:02.2
[ 3.730304] hub 1-0:1.0: USB hub found
[ 3.730304] hub 1-0:1.0: 5 ports detected
[ 3.730304] hR: Unknown symbol (err -2)
[ 3.734197] kernel BUG at arch/ia64/kernel/module.c:564!
[ 3.734197] systemd-udevd[112]: bugcheck! 0 [1]
[ 3.734197] Modules linked in: hR(PF) ehci_pci ohci_hcd ehci_hcd mptsas(+) usbcore mptscsih mptbase hpsa(+) scsi_transport_sas scsi_mod tg3(+) libphy
[ 3.734197]
[ 3.734197] CPU: 0 PID: 112 Comm: systemd-udevd Not tainted 5.1.0-rc7+ #26
[ 3.734197] Hardware name: hp server rx2660 , BIOS 04.04 07/15/2008
[ 3.734197] psr : 0000101008026010 ifs : 800000000000050d ip : [<a00000010004be90>] Not tainted (5.1.0-rc7+)
[ 3.734197] ip is at get_plt.part.0+0x190/0x360
[ 3.734197] unat: 0000000000000000 pfs : 000000000000050d rsc : 0000000000000003
[ 3.734197] rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000001a5695659
[ 3.734197] ldrs: 0000000000000000 ccv : 00000000de9356bd fpsr: 0009804c0270033f
[ 3.734197] csd : 0000000000000000 ssd : 0000000000000000
[ 3.734197] b0 : a00000010004be90 b6 : a000000100ec4320 b7 : a00000010099af40
[ 3.734197] f6 : 000000000000000000000 f7 : 1003e0044b82fa09b5a53
[ 3.734197] f8 : 1003e0000000000001ddf f9 : 1003e0000000005785f17
[ 3.734197] f10 : 1003e20c49ba5e353f7cf f11 : 1003e0000000000b33f5f
[ 3.734197] r1 : a000000101629320 r2 : a0000001013ca498 r3 : a0000001013ca4a0
[ 3.734197] r8 : 000000000000002c r9 : 0000000000000001 r10 : 0000000000000000
[ 3.734197] r11 : a0000001014cecec r12 : e000010045167d10 r13 : e000010045160000
[ 3.734197] r14 : ffffffffffda1178 r15 : a0000001013ca4a0 r16 : e000000001140000
[ 3.734197] r17 : 0000000000004000 r18 : 000000000000047c r19 : 000000000000047c
[ 3.734197] r20 : 000000000000047e r21 : 000000000000047e r22 : 000000000000047e
[ 3.734197] r23 : 000000000000015d r24 : 0000000000000afc r25 : 000000000000015e
[ 3.734197] r26 : 0000000000000afe r27 : 0000000000000afe r28 : 0000000000000b00
[ 3.734197] r29 : 0000000000000b00 r30 : 0000000000000b00 r31 : 0000000000000000
[ 3.734197]
[ 3.734197] Call Trace:
[ 3.734197] [<a000000100014bf0>] show_stack+0x90/0xc0
[ 3.734197] sp=e000010045167950 bsp=e000010045161658
[ 3.734197] [<a0000001000152d0>] show_regs+0x6b0/0xa20
[ 3.734197] sp=e000010045167b20 bsp=e0000100451615e0
[ 3.734197] [<a000000100029330>] die+0x1b0/0x480
[ 3.734197] sp=e000010045167b40 bsp=e0000100451615a0
[ 3.734197] [<a000000100ed7430>] ia64_bad_break+0x750/0x780
[ 3.734197] sp=e000010045167b40 bsp=e000010045161570
[ 3.734197] [<a00000010000ca20>] ia64_leave_kernel+0x0/0x270
[ 3.734197] sp=e000010045167b40 bsp=e000010045161570
[ 3.734197] [<a00000010004be90>] get_plt.part.0+0x190/0x360
[ 3.734197] sp=e000010045167d10 bsp=e000010045161508
[ 3.734197] [<a00000010004e350>] apply_relocate_add+0xef0/0x1400
[ 3.734197] sp=e000010045167d10 bsp=e0000100451613b0
[ 3.734197] [<a0000001001bba10>] load_module+0x3b90/0x6aa0
[ 3.734197] sp=e000010045167d20 bsp=e0000100451611d0
[ 3.734197] [<a0000001001bee30>] sys_finit_module+0x190/0x220
[ 3.734197] sp=e000010045167da0 bsp=e000010045161160
[ 3.734197] [<a00000010000c8a0>] ia64_ret_from_syscall+0x0/0x20
[ 3.734197] sp=e000010045167e30 bsp=e000010045161158
[ 3.734197] Disabling lock debugging due to kernel taint
[ 3.798946] hR: Unknown symbol (err -2)
[ 3.798946] hR: Unknown symbol (err -2)
[ 3.798946] hR: Unknown symbol (err -2)
[ 3.802733] hR: Unknown symbol (err -2)
[ 3.802733] hR: Unknown symbol (err -2)
[ 3.802733] hR: Unknown symbol (err -2)
[ 3.802733] hR: Unknown symbol �� (err -2)
[ 3.802733] hR: Unknown symbol (err -2)
[ 3.806775] hR: Unknown symbol (err -2)
[ 3.806775] hR: Unknown symbol (err -2)
[ 3.806775] hR: Unknown symbol , (err -2)
[ 3.806775] hR: Unknown symbol (err -2)
[ 3.806775] hR: Unknown symbol (err -2)
[ 3.810787] hR: Unknown symbol (err -2)
[ 3.810787] hR: Unknown symbol , (err -2)
[ 3.810787] hR: Unknown symbol (err -2)
[ 3.810787] hR: Unknown symbol (err -2)
[ 3.810787] hR: Unknown symbol (err -2)
[ 3.814779] hR: Unknown symbol (err -2)
[ 3.814779] hR: Unknown symbol (err -2)
[ 3.814779] hR: Unknown symbol �� (err -2)
[ 3.814779] hR: Unknown symbol (err -2)
[ 3.814779] hR: Unknown symbol �� (err -2)
[ 3.818840] hR: Unknown symbol (err -2)
[ 3.818840] hR: Unknown symbol ' (err -2)
[ 3.818840] hR: Unknown symbol (err -2)
[ 3.818840] systemd-udevd[111]: NaT consumption 17179869216 [2]
[ 3.818840] Modules linked in: ehci_pci ohci_hcd ehci_hcd mptsas(+) usbcore mptscsih mptbase hpsa(+) scsi_transport_sas scsi_m od tg3(+) libphy
[ 3.818840]
[ 3.818840] CPU: 0 PID: 111 Comm: systemd-udevd Tainted: G D 5.1.0-rc7+ #26
[ 3.818840] Hardware name: hp server rx2660 , BIOS 04.04 07/15/2008
[ 3.818840] psr : 0000101008022010 ifs : 8000000000000309 ip : [<a000000100307ef0>] Tainted: G D (5.1.0-rc7 +)
[ 3.818840] ip is at free_percpu+0x3f0/0x480
[ 3.818840] unat: 0000000000000000 pfs : 0000000000000309 rsc : 0000000000000003
[ 3.818840] rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000001a569a659
[ 3.818840] ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70033f
[ 3.818840] csd : 0000000000000000 ssd : 0000000000000000
[ 3.818840] b0 : a000000100307ee0 b6 : a0000001000ef500 b7 : a00000010000c240
[ 3.818840] f6 : 1003e0000000001f762e9 f7 : 1003e00000000eb9dde2f
[ 3.818840] f8 : 1003e00000000000008f1 f9 : 1003e00000000ee86b62f
[ 3.818840] f10 : 1003e00000000000002b4 f11 : 1003e000000000000ba36
[ 3.818840] r1 : a000000101629320 r2 : a000000101407268 r3 : 0000010040004000
[ 3.818840] r8 : 0000000000000000 r9 : 0000000000002288 r10 : e000010040006288
[ 3.818840] r11 : 0000000000000000 r12 : e00001004511fd20 r13 : e000010045118000
[ 3.818840] r14 : 0000000000000000 r15 : a000000101429ed0 r16 : 7ffc000000000000
[ 3.818840] r17 : 8000000000000001 r18 : 0000000000000000 r19 : a000000101432150
[ 3.818840] r20 : e00001007ff2ca80 r21 : 0000000000000000 r22 : 0000000000000000
[ 3.818840] r23 : e000010040000000 r24 : 0000000000000020 r25 : 0000000000000007
[ 3.818840] r26 : e000010040000000 r27 : 0000000000000000 r28 : e000000001140000
[ 3.818840] r29 : e000000001104000 r30 : a00000010114d1b8 r31 : e00001007ff2c8d8
[ 3.818840]
[ 3.818840] Call Trace:
[ 3.818840] [<a000000100014bf0>] show_stack+0x90/0xc0
[ 3.818840] sp=e00001004511f8e0 bsp=e000010045119500
[ 3.818840] [<a0000001000152d0>] show_regs+0x6b0/0xa20
[ 3.818840] sp=e00001004511fab0 bsp=e000010045119490
[ 3.818840] [<a000000100029330>] die+0x1b0/0x480
[ 3.818840] sp=e00001004511fad0 bsp=e000010045119450
[ 3.818840] [<a000000100ed76f0>] ia64_fault+0x290/0xe80
[ 3.818840] sp=e00001004511fad0 bsp=e000010045119400
[ 3.818840] [<a00000010000ca20>] ia64_leave_kernel+0x0/0x270
[ 3.818840] sp=e00001004511fb50 bsp=e000010045119400
[ 3.818840] [<a000000100307ef0>] free_percpu+0x3f0/0x480
[ 3.818840] sp=e00001004511fd20 bsp=e0000100451193b0
[ 3.818840] [<a0000001001bb060>] load_module+0x31e0/0x6aa0
[ 3.818840] sp=e00001004511fd20 bsp=e0000100451191d0
[ 3.818840] [<a0000001001bee30>] sys_finit_module+0x190/0x220
[ 3.818840] sp=e00001004511fda0 bsp=e000010045119160
[ 3.818840] [<a00000010000c8a0>] ia64_ret_from_syscall+0x0/0x20
[ 3.818840] sp=e00001004511fe30 bsp=e000010045119158
[ 3.880033] scsi host0: hpsa
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - [email protected]
`. `' Freie Universitaet Berlin - [email protected]
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
On Tue, 2020-08-11 at 23:54 +0200, John Paul Adrian Glaubitz wrote:
> Hi Rick!
>
> I have been bisecting some regressions on ia64 and one problem I ran
> into is that
> udev is causing the kernel to crash after the following change from
> 2019:
>
> commit 868b104d7379e28013e9d48bdd2db25e0bdcf751
> Author: Rick Edgecombe <[email protected]>
> Date: Thu Apr 25 17:11:36 2019 -0700
>
> mm/vmalloc: Add flag for freeing of special permsissions
>
> With your patch applied, udev crashes on ia64 when trying to load
> modules, I'm pasting
> the whole boot message sequence below.
>
> Any idea what could cause this problem on ia64?
>
> Thanks,
> Adrian
>
Hi,
On non-x86, this patchset shouldn't have changed much, just always
flush the TLB and purge the vmalloc area in cases where previously this
would only happen intermittently. Despite this, it also caused a
problem on sparc. In the end the sparc issue turned out to be an issue
with sparc's kernel range TLB flush implementation that was just now
being hit earlier during boot instead of after the system had been up
for some time. So I'm at first wondering if there might be something
like that uncovered here.
Unfortunately, it's unlikely that I can get access to ia64 hardware in
the near term to debug. Would you be able to test some debug patches?
Also, can you post your config?
Thanks,
Rick
Hi Rick!
On 8/12/20 6:50 AM, Edgecombe, Rick P wrote:
> On non-x86, this patchset shouldn't have changed much, just always
> flush the TLB and purge the vmalloc area in cases where previously this
> would only happen intermittently. Despite this, it also caused a
> problem on sparc. In the end the sparc issue turned out to be an issue
> with sparc's kernel range TLB flush implementation that was just now
> being hit earlier during boot instead of after the system had been up
> for some time. So I'm at first wondering if there might be something
> like that uncovered here.
Yeah, I am also suspecting a bug in the ia64-specific mm code which got
just unconvered by your changes.
> Unfortunately, it's unlikely that I can get access to ia64 hardware in
> the near term to debug. Would you be able to test some debug patches?
I can both test patches for you and arrange access to one of the Itanium
servers I manage if you want to test patches yourself. Both works fine.
> Also, can you post your config?
See attached.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - [email protected]
`. `' Freie Universitaet Berlin - [email protected]
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913