Hi,
I've just tried booting the 2.6.24.1 kernel, except without nmi_watchdog being enabled. It looks
like there are IRQs still not being enabled.
Cheers,
Chris
Linux version 2.6.24.1 ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33))
#1 SMP PREEMPT Fri Feb 8 22:41:10 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable)
BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131051
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131051
DMI 2.3 present.
ACPI: RSDP 000F7B40, 0014 (r0 ASUS )
ACPI: RSDT 1FFEB000, 0030 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: FACP 1FFEB100, 0074 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: DSDT 1FFEB180, 39FA (r1 ASUS TUSL2-C 1000 MSFT 100000B)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFEB040, 0028 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: APIC 1FFEB080, 005A (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
Enabling APIC mode: Logical Cluster. Using 1 I/O APICs, target cpus f
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130028
Kernel command line: ro root=LABEL=/ video=matroxfb:vesa:0x11A console=ttyS0,115200n8 console=tty0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c035f000 soft=c035b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1005.085 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513484k/524204k available (1577k kernel code, 10128k reserved, 607k data, 196k init, 0k
highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffeb000 ( 511 MB)
.init : 0xc0327000 - 0xc0358000 ( 196 kB)
.data : 0xc028a7ca - 0xc03227c4 ( 607 kB)
.text : 0xc0100000 - 0xc028a7ca (1577 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2011.90 BogoMIPS (lpj=4023804)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
CPU0: Intel Pentium III (Coppermine) stepping 06
Leaving ESR disabled.
Total of 1 processors activated (2011.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:03: ioport range 0x3f0-0x3f1 has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0xe400-0xe47f has been reserved
system 00:04: ioport range 0xec00-0xec3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f8800000-f9cfffff
PREFETCH window: f9f00000-fbffffff
PCI: Bridge: 0000:02:0d.0
IO window: disabled.
MEM window: f6000000-f7ffffff
PREFETCH window: f9d00000-f9dfffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-dfff
MEM window: f5800000-f87fffff
PREFETCH window: f9d00000-f9efffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2972k freed
Simple Boot Flag at 0x3a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
matroxfb: Matrox Millennium G400 MAX (AGP) detected
PInS memtype = 0
matroxfb: MTRR's turned on
matroxfb: 1280x1024x16bpp (virtual: 1280x6553)
matroxfb: framebuffer at 0xFA000000, mapped to 0xe0880000, size 33554432
Console: switching to colour frame buffer device 160x64
fb0: MATROX frame buffer device
matroxfb_crtc2: secondary head of fb0 was registered as fb1
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
EDAC MC: Ver: 2.1.0 Feb 8 2008
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:03:0d.2[C] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:03:0d.2: EHCI Host Controller
ehci_hcd 0000:03:0d.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:03:0d.2: irq 20, io mem 0xf6000000
ehci_hcd 0000:03:0d.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 22 (level, low) -> IRQ 17
ohci_hcd 0000:03:0d.0: OHCI Host Controller
ohci_hcd 0000:03:0d.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:0d.0: irq 17, io mem 0xf7000000
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:03:0d.1[B] -> GSI 23 (level, low) -> IRQ 18
ohci_hcd 0000:03:0d.1: OHCI Host Controller
ohci_hcd 0000:03:0d.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:03:0d.1: irq 18, io mem 0xf6800000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000a400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 18
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1f.4: irq 18, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
ata1.00: ATA-4: ST320420A, 3.12, max UDMA/66
ata1.00: 39851760 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122, E1.22, max UDMA/66
ata2.01: ATAPI: SONY CD-RW CRX145E, 1.0b, max UDMA/33
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST320420A 3.12 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>ehci_hcd 0000:03:0d.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
usb 1-5: device not accepting address 2, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: device not accepting address 3, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
usb 1-5: device not accepting address 4, error -110
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: device not accepting address 5, error -110
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/44:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/44
ata1: EH complete
SysRq : Emergency Sync
Emergency Sync complete
SysRq : Keyboard mode set to system default
SysRq : Keyboard mode set to system default
SysRq : Emergency Remount R/O
Emergency Remount complete
SysRq : Resetting
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
On Fri, Feb 08, 2008 at 11:31:24PM +0000, Chris Rankin wrote:
> Hi,
>
> I've just tried booting the 2.6.24.1 kernel, except without
> nmi_watchdog being enabled. It looks like there are IRQs still not
> being enabled.
Does 2.6.24 work? Is this a 2.6.24.1 regression?
thanks,
greg k-h
--- Greg KH <[email protected]> wrote:
> On Fri, Feb 08, 2008 at 11:31:24PM +0000, Chris Rankin wrote:
> > I've just tried booting the 2.6.24.1 kernel, except without
> > nmi_watchdog being enabled. It looks like there are IRQs still not
> > being enabled.
>
> Does 2.6.24 work? Is this a 2.6.24.1 regression?
Nope, 2.6.24 doesn't work either. So there's an important fix needed somewhere for 2.6.24.2 ...
;-)
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com
On Sat, Feb 09, 2008 at 12:06:06PM +0000, Chris Rankin wrote:
> --- Greg KH <[email protected]> wrote:
>
> > On Fri, Feb 08, 2008 at 11:31:24PM +0000, Chris Rankin wrote:
> > > I've just tried booting the 2.6.24.1 kernel, except without
> > > nmi_watchdog being enabled. It looks like there are IRQs still not
> > > being enabled.
> >
> > Does 2.6.24 work? Is this a 2.6.24.1 regression?
>
> Nope, 2.6.24 doesn't work either. So there's an important fix needed
> somewhere for 2.6.24.2 ... ;-)
Does any older kernel version work? 2.6.23? Newer ones? 2.6.24-git15?
Any chance at trying to bisect this down to where the problem might have
occured?
thanks,
greg k-h
--- Greg KH <[email protected]> wrote:
> Does any older kernel version work? 2.6.23? Newer ones?
Everything up to and including 2.6.23.11 works fine. I never tried 2.6.23.{12,13,14,15}, but I
expect they're fine too.
> 2.6.24-git15?
No idea. This box isn't really set up to use git. Anyway, I would refer you to this thread:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0802.0/0898.html
Cheers,
Chris
___________________________________________________________
Support the World Aids Awareness campaign this month with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/
Hi!
here is the snapshots in patch format:
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots
On 2/9/08, Chris Rankin <[email protected]> wrote:
> --- Greg KH <[email protected]> wrote:
> > Does any older kernel version work? 2.6.23? Newer ones?
> Everything up to and including 2.6.23.11 works fine. I never tried
> 2.6.23.{12,13,14,15}, but I
> expect they're fine too.
>
> > 2.6.24-git15?
> No idea. This box isn't really set up to use git. Anyway, I would refer you
> to this thread:
> http://www.uwsg.iu.edu/hypermail/linux/kernel/0802.0/0898.html
>
> Cheers,
> Chris
>
>
>
> ___________________________________________________________
> Support the World Aids Awareness campaign this month with Yahoo! For Good
> http://uk.promotions.yahoo.com/forgood/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
Oliver
--- Oliver Pinter <[email protected]> wrote:
> here is the snapshots in patch format:
> ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots
Thanks, they're very pretty. But what exactly are they patches *between*?
Cheers,
Chris
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
Hi,
I have managed to boot 2.6.24.1 on this machine, with the NMI watchdog enabled, by using the
"acpi=noirq" option. (There does seem to be some unhappiness with bridge symlinks in sysfs,
though.)
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com
[Try this again, except this time I'll force the attachment as inline text!]
Hi,
I have managed to boot 2.6.24.1 on this machine, with the NMI watchdog enabled, by using the
"acpi=noirq" option. (There does seem to be some unhappiness with bridge symlinks in sysfs,
though.)
Cheers,
Chris
Linux version 2.6.24.1 ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33))
#1 SMP PREEMPT Fri Feb 8 22:41:10 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable)
BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Entering add_active_range(0, 0, 131051) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131051
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131051
On node 0 totalpages: 131051
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125964 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7B40, 0014 (r0 ASUS )
ACPI: RSDT 1FFEB000, 0030 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: FACP 1FFEB100, 0074 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: DSDT 1FFEB180, 39FA (r1 ASUS TUSL2-C 1000 MSFT 100000B)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFEB040, 0028 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: APIC 1FFEB080, 005A (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130028
Kernel command line: ro root=LABEL=/ nmi_watchdog=1 video=matroxfb:vesa:0x11A
console=ttyS0,115200n8 console=tty0 acpi=noirq
Found and enabled local APIC!
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c035f000 soft=c035b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1005.045 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513484k/524204k available (1577k kernel code, 10128k reserved, 607k data, 196k init, 0k
highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffeb000 ( 511 MB)
.init : 0xc0327000 - 0xc0358000 ( 196 kB)
.data : 0xc028a7ca - 0xc03227c4 ( 607 kB)
.text : 0xc0100000 - 0xc028a7ca (1577 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2011.90 BogoMIPS (lpj=4023814)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
CPU0: Intel Pentium III (Coppermine) stepping 06
Leaving ESR disabled.
Total of 1 processors activated (2011.90 BogoMIPS).
Brought up 1 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Probing PCI hardware
sysfs: duplicate filename 'bridge' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
[<c0105020>] show_trace_log_lvl+0x1a/0x2f
[<c0105990>] show_trace+0x12/0x14
[<c010613d>] dump_stack+0x6c/0x72
[<c01991bf>] sysfs_add_one+0x57/0xbc
[<c0199e41>] sysfs_create_link+0xc2/0x10d
[<c01bae9a>] pci_bus_add_devices+0xbd/0x103
[<c034016c>] pci_legacy_init+0x56/0xe3
[<c03274e1>] kernel_init+0x157/0x2c3
[<c0104c83>] kernel_thread_helper+0x7/0x10
=======================
pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
sysfs: duplicate filename 'bridge' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
[<c0105020>] show_trace_log_lvl+0x1a/0x2f
[<c0105990>] show_trace+0x12/0x14
[<c010613d>] dump_stack+0x6c/0x72
[<c01991bf>] sysfs_add_one+0x57/0xbc
[<c0199e41>] sysfs_create_link+0xc2/0x10d
[<c01bae9a>] pci_bus_add_devices+0xbd/0x103
[<c01bae82>] pci_bus_add_devices+0xa5/0x103
[<c034016c>] pci_legacy_init+0x56/0xe3
[<c03274e1>] kernel_init+0x157/0x2c3
[<c0104c83>] kernel_thread_helper+0x7/0x10
=======================
pci 0000:02:0d.0: Error creating sysfs bridge symlink, continuing...
sysfs: duplicate filename 'bridge' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
[<c0105020>] show_trace_log_lvl+0x1a/0x2f
[<c0105990>] show_trace+0x12/0x14
[<c010613d>] dump_stack+0x6c/0x72
[<c01991bf>] sysfs_add_one+0x57/0xbc
[<c0199e41>] sysfs_create_link+0xc2/0x10d
[<c01bae9a>] pci_bus_add_devices+0xbd/0x103
[<c034016c>] pci_legacy_init+0x56/0xe3
[<c03274e1>] kernel_init+0x157/0x2c3
[<c0104c83>] kernel_thread_helper+0x7/0x10
=======================
pci 0000:00:1e.0: Error creating sysfs bridge symlink, continuing...
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:03: ioport range 0x3f0-0x3f1 has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0xe400-0xe47f has been reserved
system 00:04: ioport range 0xec00-0xec3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f8800000-f9cfffff
PREFETCH window: f9f00000-fbffffff
PCI: Bridge: 0000:02:0d.0
IO window: disabled.
MEM window: f6000000-f7ffffff
PREFETCH window: f9d00000-f9dfffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-dfff
MEM window: f5800000-f87fffff
PREFETCH window: f9d00000-f9efffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2972k freed
Simple Boot Flag at 0x3a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:01:00.0
matroxfb: Matrox Millennium G400 MAX (AGP) detected
PInS memtype = 0
matroxfb: MTRR's turned on
matroxfb: 1280x1024x16bpp (virtual: 1280x6553)
matroxfb: framebuffer at 0xFA000000, mapped to 0xe0880000, size 33554432
Console: switching to colour frame buffer device 160x64
fb0: MATROX frame buffer device
matroxfb_crtc2: secondary head of fb0 was registered as fb1
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
EDAC MC: Ver: 2.1.0 Feb 8 2008
TCP cubic registered
NET: Registered protocol family 1
Testing NMI watchdog ... <6>input: AT Translated Set 2 keyboard as /class/input/input0
OK.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 196k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:03:0d.2: EHCI Host Controller
ehci_hcd 0000:03:0d.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:03:0d.2: irq 9, io mem 0xf6000000
ehci_hcd 0000:03:0d.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:03:0d.0: OHCI Host Controller
ohci_hcd 0000:03:0d.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:0d.0: irq 9, io mem 0xf7000000
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:03:0d.1: OHCI Host Controller
ohci_hcd 0000:03:0d.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:03:0d.1: irq 9, io mem 0xf6800000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000a400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1f.4
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
ata1.00: ATA-4: ST320420A, 3.12, max UDMA/66
ata1.00: 39851760 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122, E1.22, max UDMA/66
ata2.01: ATAPI: SONY CD-RW CRX145E, 1.0b, max UDMA/33
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST320420A 3.12 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-116 1.22 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM SONY CD-RW CRX145E 1.0b PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: Attached scsi generic sg2 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
Linux agpgart interface v0.102
ACPI: Invalid PBLK length [5]
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 32M @ 0xfc000000
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xd400, speed 1147kHz
8139too Fast Ethernet driver 0.9.28
PCI: Found IRQ 9 for device 0000:02:0c.0
eth0: RealTek RTL8139 at 0xe292e000, 00:30:4f:10:da:38, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:02:0e.0
firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI version 1.0
input: PC Speaker as /class/input/input3
firewire_ohci: Added fw-ohci device 0000:03:0c.0, OHCI version 1.0
firewire_ohci: swap not done yet
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:1f.3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
firewire_core: created new fw device fw0 (0 config rom retries, S400)
input: ImPS/2 Generic Wheel Mouse as /class/input/input4
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
firewire_core: created new fw device fw1 (0 config rom retries, S400)
firewire_ohci: swap not done yet
PCI: Found IRQ 9 for device 0000:02:0a.0
usbcore: registered new interface driver snd-usb-audio
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.14a <[email protected]>
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 [email protected]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized mga 3.2.1 20051102 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Initialized card for AGP DMA.
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
On Sun, 17 Feb 2008 00:54:08 +0000 (GMT) Chris Rankin <[email protected]> wrote:
> [Try this again, except this time I'll force the attachment as inline text!]
>
> Hi,
>
> I have managed to boot 2.6.24.1 on this machine, with the NMI watchdog enabled, by using the
> "acpi=noirq" option. (There does seem to be some unhappiness with bridge symlinks in sysfs,
> though.)
>
> ...
>
> sysfs: duplicate filename 'bridge' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> [<c0105990>] show_trace+0x12/0x14
> [<c010613d>] dump_stack+0x6c/0x72
> [<c01991bf>] sysfs_add_one+0x57/0xbc
> [<c0199e41>] sysfs_create_link+0xc2/0x10d
> [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> [<c034016c>] pci_legacy_init+0x56/0xe3
> [<c03274e1>] kernel_init+0x157/0x2c3
> [<c0104c83>] kernel_thread_helper+0x7/0x10
> =======================
> pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> sysfs: duplicate filename 'bridge' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> [<c0105990>] show_trace+0x12/0x14
> [<c010613d>] dump_stack+0x6c/0x72
> [<c01991bf>] sysfs_add_one+0x57/0xbc
> [<c0199e41>] sysfs_create_link+0xc2/0x10d
> [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> [<c034016c>] pci_legacy_init+0x56/0xe3
> [<c03274e1>] kernel_init+0x157/0x2c3
> [<c0104c83>] kernel_thread_helper+0x7/0x10
> =======================
I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
On Sun, 17 Feb 2008 00:54:08 +0000 (GMT) Chris Rankin <[email protected]> wrote:
> [Try this again, except this time I'll force the attachment as inline text!]
>
> Hi,
>
> I have managed to boot 2.6.24.1 on this machine, with the NMI watchdog enabled, by using the
> "acpi=noirq" option. (There does seem to be some unhappiness with bridge symlinks in sysfs,
> though.)
>
Is this a regression? If so, which was the latest kernel version which
worked OK?
> NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> NFSD: starting 90-second grace period
> [drm] Initialized drm 1.1.0 20060810
> [drm] Initialized mga 3.2.1 20051102 on minor 0
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> [drm] Initialized card for AGP DMA.
>
and here it hangs, I assume?
Please add initcall_debug to the kernel boot command line so we can see if
we can get a more precise idea of where it went wrong.
Do you believe that this hang is somehow caused by x86 NMI? If so, why?
Thanks.
--- Andrew Morton <[email protected]> wrote:
> and here it hangs, I assume?
Oops, I think you have misunderstood. The hang happens if I *don't* specify acpi=noirq, whereas in
this case I did. I have already reported the original hang under threads:
http://www.ussg.iu.edu/hypermail/linux/kernel/0802.0/0895.html
http://www.ussg.iu.edu/hypermail/linux/kernel/0802.0/0898.html
So I was actually reporting that I've *worked around* the hang here. The net result is that all my
PCI devices are now placed on IRQ 9, instead of IRQs 16, 17 18 and 19.
Cheers,
Chris
___________________________________________________________
Support the World Aids Awareness campaign this month with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/
--- Andrew Morton <[email protected]> wrote:
> > sysfs: duplicate filename 'bridge' can not be created
> > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > [<c0105990>] show_trace+0x12/0x14
> > [<c010613d>] dump_stack+0x6c/0x72
> > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > [<c034016c>] pci_legacy_init+0x56/0xe3
> > [<c03274e1>] kernel_init+0x157/0x2c3
> > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > =======================
> > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > sysfs: duplicate filename 'bridge' can not be created
> > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > [<c0105990>] show_trace+0x12/0x14
> > [<c010613d>] dump_stack+0x6c/0x72
> > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> > [<c034016c>] pci_legacy_init+0x56/0xe3
> > [<c03274e1>] kernel_init+0x157/0x2c3
> > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > =======================
>
> I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
Obviously not in 2.6.24.1, and I thought that 2.6.24.2 just added the fix for the vmsplice
exploit. So unless 2.6.24.3 has been released...?
Cheers,
Chris
___________________________________________________________
Support the World Aids Awareness campaign this month with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/
On Mon, 18 Feb 2008 05:00:49 -0800
Andrew Morton <[email protected]> wrote:
> On Sun, 17 Feb 2008 00:54:08 +0000 (GMT) Chris Rankin <[email protected]> wrote:
>
> > [Try this again, except this time I'll force the attachment as inline text!]
> >
> > Hi,
> >
> > I have managed to boot 2.6.24.1 on this machine, with the NMI watchdog enabled, by using the
> > "acpi=noirq" option. (There does seem to be some unhappiness with bridge symlinks in sysfs,
> > though.)
> >
> > ...
> >
> > sysfs: duplicate filename 'bridge' can not be created
> > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > [<c0105990>] show_trace+0x12/0x14
> > [<c010613d>] dump_stack+0x6c/0x72
> > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > [<c034016c>] pci_legacy_init+0x56/0xe3
> > [<c03274e1>] kernel_init+0x157/0x2c3
> > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > =======================
> > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > sysfs: duplicate filename 'bridge' can not be created
> > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > [<c0105990>] show_trace+0x12/0x14
> > [<c010613d>] dump_stack+0x6c/0x72
> > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> > [<c034016c>] pci_legacy_init+0x56/0xe3
> > [<c03274e1>] kernel_init+0x157/0x2c3
> > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > =======================
>
> I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
Never heard of this, what is the initialization script that causes this?
Also do you have the SYSFS_DEPRECATED option configured? that caused issues
with regular network drivers.
--- Stephen Hemminger <[email protected]> wrote:
> > > sysfs: duplicate filename 'bridge' can not be created
> > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > [<c0105990>] show_trace+0x12/0x14
> > > [<c010613d>] dump_stack+0x6c/0x72
> > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > =======================
> > > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > > sysfs: duplicate filename 'bridge' can not be created
> > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > [<c0105990>] show_trace+0x12/0x14
> > > [<c010613d>] dump_stack+0x6c/0x72
> > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > =======================
> >
> > I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
>
> Never heard of this, what is the initialization script that causes this?
> Also do you have the SYSFS_DEPRECATED option configured? that caused issues
> with regular network drivers.
Yes, SYSFS_DEPRECATED is enabled. And the init scripts are from Fedora 8.
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com
On Mon, 18 Feb 2008 19:42:25 +0000 (GMT)
Chris Rankin <[email protected]> wrote:
> --- Stephen Hemminger <[email protected]> wrote:
> > > > sysfs: duplicate filename 'bridge' can not be created
> > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > > [<c0105990>] show_trace+0x12/0x14
> > > > [<c010613d>] dump_stack+0x6c/0x72
> > > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > > =======================
> > > > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > > > sysfs: duplicate filename 'bridge' can not be created
> > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > > [<c0105990>] show_trace+0x12/0x14
> > > > [<c010613d>] dump_stack+0x6c/0x72
> > > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > > [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> > > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > > =======================
> > >
> > > I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
> >
> > Never heard of this, what is the initialization script that causes this?
> > Also do you have the SYSFS_DEPRECATED option configured? that caused issues
> > with regular network drivers.
>
> Yes, SYSFS_DEPRECATED is enabled. And the init scripts are from Fedora 8.
There was a bug (fixed in 2.6.24) that had to do with sysfs_create_link
and SYSFS_DEPRECATED probably there is a similar problem with directories.
On Feb 18, 2008 9:06 PM, Stephen Hemminger
<[email protected]> wrote:
> On Mon, 18 Feb 2008 19:42:25 +0000 (GMT)
> Chris Rankin <[email protected]> wrote:
>
> > --- Stephen Hemminger <[email protected]> wrote:
> > > > > sysfs: duplicate filename 'bridge' can not be created
> > > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > > > [<c0105990>] show_trace+0x12/0x14
> > > > > [<c010613d>] dump_stack+0x6c/0x72
> > > > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > > > =======================
> > > > > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > > > > sysfs: duplicate filename 'bridge' can not be created
> > > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > > > [<c0105990>] show_trace+0x12/0x14
> > > > > [<c010613d>] dump_stack+0x6c/0x72
> > > > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > > > [<c01bae82>] pci_bus_add_devices+0xa5/0x103
> > > > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > > > =======================
> > > >
> > > > I have a vague feeling that this was fixed, perhaps in 2.6.24.x?
> > >
> > > Never heard of this, what is the initialization script that causes this?
> > > Also do you have the SYSFS_DEPRECATED option configured? that caused issues
> > > with regular network drivers.
> >
> > Yes, SYSFS_DEPRECATED is enabled. And the init scripts are from Fedora 8.
>
> There was a bug (fixed in 2.6.24) that had to do with sysfs_create_link
> and SYSFS_DEPRECATED probably there is a similar problem with directories.
Chris, could you enable CONFIG_DEBUG_KOBJECT=y, it might show what
objects try to claim the same name.
Thanks,
Kay
On Tue, Feb 19, 2008 at 9:47 AM, Kay Sievers <[email protected]> wrote:
> On Feb 18, 2008 9:06 PM, Stephen Hemminger <[email protected]> wrote:
> > On Mon, 18 Feb 2008 19:42:25 +0000 (GMT)
> > Chris Rankin <[email protected]> wrote:
> >
> > > --- Stephen Hemminger <[email protected]> wrote:
> > > > > > sysfs: duplicate filename 'bridge' can not be created
> > > > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > > > > > Pid: 1, comm: swapper Not tainted 2.6.24.1 #1
> > > > > > [<c0105020>] show_trace_log_lvl+0x1a/0x2f
> > > > > > [<c0105990>] show_trace+0x12/0x14
> > > > > > [<c010613d>] dump_stack+0x6c/0x72
> > > > > > [<c01991bf>] sysfs_add_one+0x57/0xbc
> > > > > > [<c0199e41>] sysfs_create_link+0xc2/0x10d
> > > > > > [<c01bae9a>] pci_bus_add_devices+0xbd/0x103
> > > > > > [<c034016c>] pci_legacy_init+0x56/0xe3
> > > > > > [<c03274e1>] kernel_init+0x157/0x2c3
> > > > > > [<c0104c83>] kernel_thread_helper+0x7/0x10
> > > > > > =======================
> > > > > > pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
> > > > > > sysfs: duplicate filename 'bridge' can not be created
> > > > > > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Greg,
it seems that:
arch/x86/pci/legacy.c :: pci_legacy_init()
tries to create already created "bridge" symlinks in 2.6.24. So we
discover the same devices twice? Can this be a reason for the hang?
I guess in 2.6.25, the warning is gone with:
commit fd7d1ced29e5beb88c9068801da7a362606d8273
Author: Greg Kroah-Hartman <[email protected]>
Date: Tue May 22 22:47:54 2007 -0400
PCI: make pci_bus a struct device
This moves the pci_bus class device to be a real struct device and at
the same time, place it in the device tree in the correct location.
Note, the old "bridge" symlink is now gone.
Thanks,
Kay
--- Kay Sievers <[email protected]> wrote:
> Greg,
> it seems that:
> arch/x86/pci/legacy.c :: pci_legacy_init()
>
> tries to create already created "bridge" symlinks in 2.6.24. So we
> discover the same devices twice? Can this be a reason for the hang?
No, it can't be because it's *not* hanging in this configuration :-). It hangs when I *don't* add
the acpi=noirq option, whereas here it's just adding noise to the dmesg log. (I'm guessing Linux
doesn't call pci_legacy_init() when ACPI takes charge of the IRQs.)
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail.
A Smarter Inbox. http://uk.docs.yahoo.com/nowyoucan.html
FYI, this hang still exists in 2.6.24.3 and so I am still needing to boot with the acpi=noirq
parameter.
Cheers,
Chris
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
On Tue, Feb 26, 2008 at 10:36:00PM +0000, Chris Rankin wrote:
> FYI, this hang still exists in 2.6.24.3 and so I am still needing to boot with the acpi=noirq
> parameter.
You're going to have to refresh my memory. Was this a problem caused by
the .1 .2 or .3 kernel releases? Did 2.6.24 have this problem as well,
or was it ok?
thanks,
greg k-h
--- Greg KH <[email protected]> wrote:
> On Tue, Feb 26, 2008 at 10:36:00PM +0000, Chris Rankin wrote:
> > FYI, this hang still exists in 2.6.24.3 and so I am still needing to boot with the acpi=noirq
> > parameter.
>
> You're going to have to refresh my memory. Was this a problem caused by
> the .1 .2 or .3 kernel releases? Did 2.6.24 have this problem as well,
> or was it ok?
It's a bug introduced in 2.6.24; that ACPI fails to allocate IRQs correctly for PCI devices, which
makes the kernel hang at boot-time:
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
BUG: NMI Watchdog detected LOCKUP on CPU0, eip c0102b07, registers:
Modules linked in:
Pid: 0, comm: swapper Not tainted (2.6.24.1 #1)
EIP: 0060:[<c0102b07>] EFLAGS: 00000246 CPU: 0
EIP is at default_idle+0x2f/0x43
EAX: 00000000 EBX: c0102ad8 ECX: 010b2000 EDX: fffedb3c
ESI: 00000000 EDI: c1409284 EBP: c0323fb4 ESP: c0323fb4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c0323000 task=c02fc320 task.ti=c0323000)
Stack: c0323fc4 c01025af c140c000 c0357284 c0323fcc c02873a9 c0323ff8 c032792f
00000037 c0327108 00000000 00000004 00009000 c0343b00 00000002 00099800
c0319000 007ab007 00000000
Call Trace:
[<c0105020>] show_trace_log_lvl+0x1a/0x2f
[<c01050d2>] show_stack_log_lvl+0x9d/0xa5
[<c010517d>] show_registers+0xa3/0x1df
[<c0105ba7>] die_nmi+0x81/0xd2
[<c0115d72>] nmi_watchdog_tick+0xd5/0x12a
[<c0105f19>] do_nmi+0x93/0x24b
[<c0289b83>] nmi_stack_correct+0x26/0x2b
[<c01025af>] cpu_idle+0x9a/0xcf
[<c02873a9>] rest_init+0x5d/0x5f
[<c032792f>] start_kernel+0x2e2/0x2ea
[<00000000>] _stext+0x3feff000/0x19
=======================
Code: 36 c0 00 55 89 e5 75 33 80 3d e5 17 32 c0 00 74 2a 89 e0 25 00 f0 ff ff 83 60 0c fd f0 83 04
24 00 fa 8b 40 08 a8 04 75 04 fb f4 <eb> 01 fb 89 e0 25 00 f0 ff ff 83 48 0c 02 eb 02 f3 90 5d c3
55
(This trace is from 2.6.24.1, but it hasn't changed in 2.6.24.3.) I currently avoid this problem
by booting with acpi=noirq, which puts all the PCI devices on IRQ 9 instead of sharing them
between IRQs 16, 17, 18 and 19.
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail.
A Smarter Inbox. http://uk.docs.yahoo.com/nowyoucan.html
On Wed, 27 Feb 2008 00:55:38 +0000 (GMT) Chris Rankin <[email protected]> wrote:
> --- Greg KH <[email protected]> wrote:
> > On Tue, Feb 26, 2008 at 10:36:00PM +0000, Chris Rankin wrote:
> > > FYI, this hang still exists in 2.6.24.3 and so I am still needing to boot with the acpi=noirq
> > > parameter.
> >
> > You're going to have to refresh my memory. Was this a problem caused by
> > the .1 .2 or .3 kernel releases? Did 2.6.24 have this problem as well,
> > or was it ok?
>
> It's a bug introduced in 2.6.24; that ACPI fails to allocate IRQs correctly for PCI devices, which
> makes the kernel hang at boot-time:
You reported this regression nearly a month ago and apart from me flailing
around nobody has bothered to do the slightest thing about it.
If you can identify the offending commit (see
http://www.kernel.org/doc/local/git-quick.html) we'll get it working again
and I really don't care how many commits we have to revert to do it.
--- Andrew Morton <[email protected]> wrote:
> You reported this regression nearly a month ago and apart from me flailing
> around nobody has bothered to do the slightest thing about it.
Yes, I've noticed. Am I the only person hitting this then?
> If you can identify the offending commit (see
> http://www.kernel.org/doc/local/git-quick.html) we'll get it working again
> and I really don't care how many commits we have to revert to do it.
I'm not sure about a complete git installation, but I should at least be able to find the last
working 2.6.23-gitX or 2.6.24-rcX-gitY tree. (Assuming that these are the intermediate steps
between 2.6.23 and 2.6.24.)
Cheers,
Chris
__________________________________________________________
Sent from Yahoo! Mail.
A Smarter Inbox. http://uk.docs.yahoo.com/nowyoucan.html
--- Andrew Morton <[email protected]> wrote:
> If you can identify the offending commit (see
> http://www.kernel.org/doc/local/git-quick.html) we'll get it working again
> and I really don't care how many commits we have to revert to do it.
I have finally worked out what was happening: my "Subarchitecture type" had somehow become set to
the default "Generic architecture" instead of "PC-compatible". I have no idea how! I now get the
following boot log with 2.6.24.3, although it still has a "feature" when it comes to enabling the
APIC timer:
Linux version 2.6.24.3 ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33))
#1 SMP PREEMPT Sun Mar 2 02:00:33 GMT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable)
BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Entering add_active_range(0, 0, 131051) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131051
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131051
On node 0 totalpages: 131051
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125964 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7B40, 0014 (r0 ASUS )
ACPI: RSDT 1FFEB000, 0030 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: FACP 1FFEB100, 0074 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: DSDT 1FFEB180, 39FA (r1 ASUS TUSL2-C 1000 MSFT 100000B)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFEB040, 0028 (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: APIC 1FFEB080, 005A (r1 ASUS TUSL2-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130028
Kernel command line: ro root=LABEL=/ nmi_watchdog=1 video=matroxfb:vesa:0x11A
console=ttyS0,115200n8 console=tty0
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c035f000 soft=c035b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1005.042 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513452k/524204k available (1578k kernel code, 10160k reserved, 607k data, 196k init, 0k
highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffeb000 ( 511 MB)
.init : 0xc0327000 - 0xc0358000 ( 196 kB)
.data : 0xc028a8a2 - 0xc03227c4 ( 607 kB)
.text : 0xc0100000 - 0xc028a8a2 (1578 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2011.87 BogoMIPS (lpj=4023740)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
CPU0: Intel Pentium III (Coppermine) stepping 06
Total of 1 processors activated (2011.87 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
WARNING: at arch/x86/kernel/smp_32.c:561 native_smp_call_function_mask()
Pid: 1, comm: swapper Not tainted 2.6.24.3 #1
[<c0105020>] show_trace_log_lvl+0x1a/0x2f
[<c0105990>] show_trace+0x12/0x14
[<c010613d>] dump_stack+0x6c/0x72
[<c0113ae3>] native_smp_call_function_mask+0x40/0x12a
[<c0114eb9>] smp_call_function+0x1e/0x22
[<c0125bc0>] on_each_cpu+0x2a/0x57
[<c011721d>] setup_nmi+0x33/0x4a
[<c033262e>] setup_IO_APIC+0x8b5/0xddd
[<c032fe21>] native_smp_prepare_cpus+0x4b6/0x4c6
[<c03273de>] kernel_init+0x54/0x2c3
[<c0104c83>] kernel_thread_helper+0x7/0x10
=======================
APIC timer registered as dummy, due to nmi_watchdog=1!
Brought up 1 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:03: ioport range 0x3f0-0x3f1 has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0xe400-0xe47f has been reserved
system 00:04: ioport range 0xec00-0xec3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f8800000-f9cfffff
PREFETCH window: f9f00000-fbffffff
PCI: Bridge: 0000:02:0d.0
IO window: disabled.
MEM window: f6000000-f7ffffff
PREFETCH window: f9d00000-f9dfffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-dfff
MEM window: f5800000-f87fffff
PREFETCH window: f9d00000-f9efffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Freeing initrd memory: 2972k freed
Simple Boot Flag at 0x3a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
matroxfb: Matrox Millennium G400 MAX (AGP) detected
PInS memtype = 0
matroxfb: MTRR's turned on
matroxfb: 1280x1024x16bpp (virtual: 1280x6553)
matroxfb: framebuffer at 0xFA000000, mapped to 0xe0880000, size 33554432
Console: switching to colour frame buffer device 160x64
fb0: MATROX frame buffer device
matroxfb_crtc2: secondary head of fb0 was registered as fb1
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
EDAC MC: Ver: 2.1.0 Mar 2 2008
TCP cubic registered
NET: Registered protocol family 1
Testing NMI watchdog ... <6>input: AT Translated Set 2 keyboard as /class/input/input0
OK.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 196k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:03:0d.2[C] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:03:0d.2: EHCI Host Controller
ehci_hcd 0000:03:0d.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:03:0d.2: irq 20, io mem 0xf6000000
ehci_hcd 0000:03:0d.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 22 (level, low) -> IRQ 17
ohci_hcd 0000:03:0d.0: OHCI Host Controller
ohci_hcd 0000:03:0d.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:0d.0: irq 17, io mem 0xf7000000
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:03:0d.1[B] -> GSI 23 (level, low) -> IRQ 18
ohci_hcd 0000:03:0d.1: OHCI Host Controller
ohci_hcd 0000:03:0d.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:03:0d.1: irq 18, io mem 0xf6800000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000a400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1f.4: irq 18, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
ata1.00: ATA-4: ST320420A, 3.12, max UDMA/66
ata1.00: 39851760 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122, E1.22, max UDMA/66
ata2.01: ATAPI: SONY CD-RW CRX145E, 1.0b, max UDMA/33
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST320420A 3.12 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 39851760 512-byte hardware sectors (20404 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-116 1.22 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM SONY CD-RW CRX145E 1.0b PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: Attached scsi generic sg2 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
ACPI: Invalid PBLK length [5]
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
Linux agpgart interface v0.102
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 32M @ 0xfc000000
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xd400, speed 1147kHz
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xe28de000, 00:30:4f:10:da:38, IRQ 20
eth0: Identified 8139 chip type 'RTL-8139C'
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI version 1.0
ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 21 (level, low) -> IRQ 22
input: PC Speaker as /class/input/input3
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:03:0c.0, OHCI version 1.0
firewire_ohci: swap not done yet
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
firewire_core: created new fw device fw0 (0 config rom retries, S400)
input: ImPS/2 Generic Wheel Mouse as /class/input/input4
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
firewire_core: created new fw device fw1 (0 config rom retries, S400)
firewire_ohci: swap not done yet
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 17
usbcore: registered new interface driver snd-usb-audio
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.14a <[email protected]>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 [email protected]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized mga 3.2.1 20051102 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Initialized card for AGP DMA.
Cheers,
Chris
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/