[permalink] [raw]

Subject: [PATCH v2 3/4] net: dsa: vsc73xx: add support for parallel mode

This patch add platform part of vsc73xx driver.
It allows to use chip connected by parallel interface.

Signed-off-by: Pawel Dembicki <[email protected]>
---
Changes in v2:
- drop mutex
- fix indentation

drivers/net/dsa/Kconfig | 8 ++
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/vitesse-vsc73xx-platform.c | 160 +++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/net/dsa/vitesse-vsc73xx-platform.c

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 4ab2aa09e2e4..80965808949d 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -116,4 +116,12 @@ config NET_DSA_VITESSE_VSC73XX_SPI
---help---
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
and VSC7398 SparX integrated ethernet switches in SPI managed mode.
+
+config NET_DSA_VITESSE_VSC73XX_PLATFORM
+ tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
+ depends on HAS_IOMEM
+ select NET_DSA_VITESSE_VSC73XX
+ ---help---
+ This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+ and VSC7398 SparX integrated ethernet switches in Platform managed mode.
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 117bf78be211..d5e4c668ac03 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx-core.o
+obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM) += vitesse-vsc73xx-platform.o
obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o
obj-y += b53/
obj-y += microchip/
diff --git a/drivers/net/dsa/vitesse-vsc73xx-platform.c b/drivers/net/dsa/vitesse-vsc73xx-platform.c
new file mode 100644
index 000000000000..149d921b8499
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx-platform.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+/* DSA driver for:
+ * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+ *
+ * This driver takes control of the switch chip over Platform and
+ * configures it to route packages around when connected to a CPU port.
+ *
+ * Copyright (C) 2019 pawel Dembicki <[email protected]>
+ * Based on vitesse-vsc-spi.c by:
+ * Copyright (C) 2018 Linus Wallej <[email protected]>
+ * Includes portions of code from the firmware uploader by:
+ * Copyright (C) 2009 Gabor Juhos <[email protected]>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "vitesse-vsc73xx.h"
+
+#define VSC73XX_CMD_PLATFORM_BLOCK_SHIFT 14
+#define VSC73XX_CMD_PLATFORM_BLOCK_MASK 0x7
+#define VSC73XX_CMD_PLATFORM_SUBBLOCK_SHIFT 10
+#define VSC73XX_CMD_PLATFORM_SUBBLOCK_MASK 0xf
+#define VSC73XX_CMD_PLATFORM_REGISTER_SHIFT 2
+
+/**
+ * struct vsc73xx_platform - VSC73xx Platform state container
+ */
+struct vsc73xx_platform {
+ struct platform_device *pdev;
+ void __iomem *base_addr;
+ struct vsc73xx vsc;
+};
+
+static const struct vsc73xx_ops vsc73xx_platform_ops;
+
+static u32 vsc73xx_make_addr(u8 block, u8 subblock, u8 reg)
+{
+ u32 ret;
+
+ ret = (block & VSC73XX_CMD_PLATFORM_BLOCK_MASK)
+ << VSC73XX_CMD_PLATFORM_BLOCK_SHIFT;
+ ret |= (subblock & VSC73XX_CMD_PLATFORM_SUBBLOCK_MASK)
+ << VSC73XX_CMD_PLATFORM_SUBBLOCK_SHIFT;
+ ret |= reg << VSC73XX_CMD_PLATFORM_REGISTER_SHIFT;
+
+ return ret;
+}
+
+static int vsc73xx_platform_read(struct vsc73xx *vsc, u8 block, u8 subblock,
+ u8 reg, u32 *val)
+{
+ struct vsc73xx_platform *vsc_platform = vsc->priv;
+ u32 offset;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ offset = vsc73xx_make_addr(block, subblock, reg);
+ *val = ioread32be(vsc_platform->base_addr + offset);
+
+ return 0;
+}
+
+static int vsc73xx_platform_write(struct vsc73xx *vsc, u8 block, u8 subblock,
+ u8 reg, u32 val)
+{
+ struct vsc73xx_platform *vsc_platform = vsc->priv;
+ u32 offset;
+
+ if (!vsc73xx_is_addr_valid(block, subblock))
+ return -EINVAL;
+
+ offset = vsc73xx_make_addr(block, subblock, reg);
+ iowrite32be(val, vsc_platform->base_addr + offset);
+
+ return 0;
+}
+
+static int vsc73xx_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct vsc73xx_platform *vsc_platform;
+ struct resource *res = NULL;
+ int ret;
+
+ vsc_platform = devm_kzalloc(dev, sizeof(*vsc_platform), GFP_KERNEL);
+ if (!vsc_platform)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, vsc_platform);
+ vsc_platform->pdev = pdev;
+ vsc_platform->vsc.dev = dev;
+ vsc_platform->vsc.priv = vsc_platform;
+ vsc_platform->vsc.ops = &vsc73xx_platform_ops;
+
+ /* obtain I/O memory space */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot obtain I/O memory space\n");
+ ret = -ENXIO;
+ return ret;
+ }
+
+ vsc_platform->base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(vsc_platform->base_addr)) {
+ dev_err(&pdev->dev, "cannot request I/O memory space\n");
+ ret = -ENXIO;
+ return ret;
+ }
+
+ return vsc73xx_probe(&vsc_platform->vsc);
+}
+
+static int vsc73xx_platform_remove(struct platform_device *pdev)
+{
+ struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev);
+
+ return vsc73xx_remove(&vsc_platform->vsc);
+}
+
+static const struct vsc73xx_ops vsc73xx_platform_ops = {
+ .read = vsc73xx_platform_read,
+ .write = vsc73xx_platform_write,
+};
+
+static const struct of_device_id vsc73xx_of_match[] = {
+ {
+ .compatible = "vitesse,vsc7385",
+ },
+ {
+ .compatible = "vitesse,vsc7388",
+ },
+ {
+ .compatible = "vitesse,vsc7395",
+ },
+ {
+ .compatible = "vitesse,vsc7398",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
+
+static struct platform_driver vsc73xx_platform_driver = {
+ .probe = vsc73xx_platform_probe,
+ .remove = vsc73xx_platform_remove,
+ .driver = {
+ .name = "vsc73xx-platform",
+ .of_match_table = vsc73xx_of_match,
+ },
+};
+module_platform_driver(vsc73xx_platform_driver);
+
+MODULE_AUTHOR("Pawel Dembicki <[email protected]>");
+MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 Platform driver");
+MODULE_LICENSE("GPL v2");
--
2.20.1

2019-07-03 09:12:44

by Pawel Dembicki

[permalink] [raw]

Subject: [PATCH v2 4/4] net: dsa: vsc73xx: Assert reset if iCPU is enabled

Driver allow to use devices with disabled iCPU only.

Some devices have pre-initialised iCPU by bootloader.
That state make switch unmanaged. This patch force reset
if device is in unmanaged state. In the result chip lost
internal firmware from RAM and it can be managed.

Signed-off-by: Pawel Dembicki <[email protected]>
---
Changes in v2:
- rebase commit after changes 1-3/4 patches

drivers/net/dsa/vitesse-vsc73xx-core.c | 36 ++++++++++++--------------
1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 10063f31d9a3..4525702faf68 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -417,22 +417,8 @@ static int vsc73xx_detect(struct vsc73xx *vsc)
}

if (val == 0xffffffff) {
- dev_info(vsc->dev, "chip seems dead, assert reset\n");
- gpiod_set_value_cansleep(vsc->reset, 1);
- /* Reset pulse should be 20ns minimum, according to datasheet
- * table 245, so 10us should be fine
- */
- usleep_range(10, 100);
- gpiod_set_value_cansleep(vsc->reset, 0);
- /* Wait 20ms according to datasheet table 245 */
- msleep(20);
-
- ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_MBOX_VAL, &val);
- if (val == 0xffffffff) {
- dev_err(vsc->dev, "seems not to help, giving up\n");
- return -ENODEV;
- }
+ dev_info(vsc->dev, "chip seems dead.\n");
+ return -EAGAIN;
}

ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
@@ -483,9 +469,8 @@ static int vsc73xx_detect(struct vsc73xx *vsc)
}
if (icpu_si_boot_en && !icpu_pi_en) {
dev_err(vsc->dev,
- "iCPU enabled boots from SI, no external memory\n");
- dev_err(vsc->dev, "no idea how to deal with this\n");
- return -ENODEV;
+ "iCPU enabled boots from PI/SI, no external memory\n");
+ return -EAGAIN;
}
if (!icpu_si_boot_en && icpu_pi_en) {
dev_err(vsc->dev,
@@ -1158,6 +1143,19 @@ int vsc73xx_probe(struct vsc73xx *vsc)
msleep(20);

ret = vsc73xx_detect(vsc);
+ if (ret == -EAGAIN) {
+ dev_err(vsc->dev,
+ "Chip seams to be out of control. Assert reset and try again.\n");
+ gpiod_set_value_cansleep(vsc->reset, 1);
+ /* Reset pulse should be 20ns minimum, according to datasheet
+ * table 245, so 10us should be fine
+ */
+ usleep_range(10, 100);
+ gpiod_set_value_cansleep(vsc->reset, 0);
+ /* Wait 20ms according to datasheet table 245 */
+ msleep(20);
+ ret = vsc73xx_detect(vsc);
+ }
if (ret) {
dev_err(dev, "no chip found (%d)\n", ret);
return -ENODEV;
--
2.20.1

2019-07-03 12:42:18

by Linus Walleij

[permalink] [raw]

Subject: Re: [PATCH v2 1/4] net: dsa: Change DT bindings for Vitesse VSC73xx switches

On Wed, Jul 3, 2019 at 10:58 AM Pawel Dembicki <[email protected]> wrote:

> This commit introduce how to use vsc73xx platform driver.
>
> Signed-off-by: Pawel Dembicki <[email protected]>
> ---
> Changes in v2:
> - Drop -spi and -platform suffix
> - Change commit message

Reviewed-by: Linus Walleij <[email protected]>

Yours,
Linus Walleij

2019-07-03 15:28:38

by Florian Fainelli

[permalink] [raw]

Subject: Re: [PATCH v2 1/4] net: dsa: Change DT bindings for Vitesse VSC73xx switches

On 7/3/2019 1:57 AM, Pawel Dembicki wrote:
> This commit introduce how to use vsc73xx platform driver.
>
> Signed-off-by: Pawel Dembicki <[email protected]>

Pawel, please resubmit your patches starting a new thread, not as reply
to the existing ones, see
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n134
for details. Also, David Miller typically likes to have a cover letter
for patch count > 1.

Thanks!

> ---
> Changes in v2:
> - Drop -spi and -platform suffix
> - Change commit message
>
> .../bindings/net/dsa/vitesse,vsc73xx.txt | 57 +++++++++++++++++--
> 1 file changed, 53 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> index ed4710c40641..c55e0148657d 100644
> --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
> @@ -2,8 +2,8 @@ Vitesse VSC73xx Switches
> ========================
>
> This defines device tree bindings for the Vitesse VSC73xx switch chips.
> -The Vitesse company has been acquired by Microsemi and Microsemi in turn
> -acquired by Microchip but retains this vendor branding.
> +The Vitesse company has been acquired by Microsemi and Microsemi has
> +been acquired Microchip but retains this vendor branding.
>
> The currently supported switch chips are:
> Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
> @@ -11,8 +11,13 @@ Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
> Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
> Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
>
> -The device tree node is an SPI device so it must reside inside a SPI bus
> -device tree node, see spi/spi-bus.txt
> +This switch could have two different management interface.
> +
> +If SPI interface is used, the device tree node is an SPI device so it must
> +reside inside a SPI bus device tree node, see spi/spi-bus.txt
> +
> +If Platform driver is used, the device tree node is an platform device so it
> +must reside inside a platform bus device tree node.
>
> Required properties:
>
> @@ -38,6 +43,7 @@ and subnodes of DSA switches.
>
> Examples:
>
> +SPI:
> switch@0 {
> compatible = "vitesse,vsc7395";
> reg = <0>;
> @@ -79,3 +85,46 @@ switch@0 {
> };
> };
> };
> +
> +Platform:
> +switch@2,0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "vitesse,vsc7385";
> + reg = <0x2 0x0 0x20000>;
> + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "lan1";
> + };
> + port@1 {
> + reg = <1>;
> + label = "lan2";
> + };
> + port@2 {
> + reg = <2>;
> + label = "lan3";
> + };
> + port@3 {
> + reg = <3>;
> + label = "lan4";
> + };
> + vsc: port@6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&enet0>;
> + phy-mode = "rgmii";
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> +
> +};
>

--
Florian