When the auxiliary device code is built into the kernel, it can be executed
before the auxiliary bus is registered. This causes bus->p to be not
allocated and triggers a NULL pointer dereference when the auxiliary bus
device gets added with bus_add_device(). Call the auxiliary_bus_init()
under driver_init() so the bus is initialized before devices.
Below is the kernel splat for the bug:
[ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 1.950670] #PF: supervisor read access in kernel mode
[ 1.950670] #PF: error_code(0x0000) - not-present page
[ 1.950670] PGD 0
[ 1.950670] Oops: 0000 1 SMP NOPTI
[ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
[ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
[ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
[ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
[ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
[ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
[ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
[ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
[ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
[ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
[ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
[ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1.950670] PKRU: 55555554
[ 1.950670] Call Trace:
[ 1.950670] device_add+0x3ee/0x850
[ 1.950670] __auxiliary_device_add+0x47/0x60
[ 1.950670] idxd_pci_probe+0xf77/0x1180
[ 1.950670] local_pci_probe+0x4a/0x90
[ 1.950670] pci_device_probe+0xff/0x1b0
[ 1.950670] really_probe+0x1cf/0x440
[ 1.950670] ? rdinit_setup+0x31/0x31
[ 1.950670] driver_probe_device+0xe8/0x150
[ 1.950670] device_driver_attach+0x58/0x60
[ 1.950670] __driver_attach+0x8f/0x150
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] bus_for_each_dev+0x79/0xc0
[ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
[ 1.950670] driver_attach+0x1e/0x20
[ 1.950670] bus_add_driver+0x154/0x1f0
[ 1.950670] driver_register+0x70/0xc0
[ 1.950670] __pci_register_driver+0x54/0x60
[ 1.950670] idxd_init_module+0xe2/0xfc
[ 1.950670] ? idma64_platform_driver_init+0x19/0x19
[ 1.950670] do_one_initcall+0x4a/0x1e0
[ 1.950670] kernel_init_freeable+0x1fc/0x25c
[ 1.950670] ? rest_init+0xba/0xba
[ 1.950670] kernel_init+0xe/0x116
[ 1.950670] ret_from_fork+0x1f/0x30
[ 1.950670] Modules linked in:
[ 1.950670] CR2: 0000000000000060
[ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
Fixes: 7de3697e9cbd ("Add auxiliary bus support")
Reported-by: Jacob Pan <[email protected]>
Acked-by: Dave Ertman <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
---
v3:
- Change init function to return void. (GregKH)
v2:
- Call in driver_init() to ensure aux bus gets init before devices. (GregKH)
drivers/base/base.h | 5 +++++
drivers/base/auxiliary.c | 13 +++----------
drivers/base/init.c | 1 +
3 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index f5600a83124f..52b3d7b75c27 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -119,6 +119,11 @@ static inline int hypervisor_init(void) { return 0; }
extern int platform_bus_init(void);
extern void cpu_dev_init(void);
extern void container_dev_init(void);
+#ifdef CONFIG_AUXILIARY_BUS
+extern void auxiliary_bus_init(void);
+#else
+static inline void auxiliary_bus_init(void) { }
+#endif
struct kobject *virtual_device_parent(struct device *dev);
diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
index 8336535f1e11..d8b314e7d0fd 100644
--- a/drivers/base/auxiliary.c
+++ b/drivers/base/auxiliary.c
@@ -15,6 +15,7 @@
#include <linux/pm_runtime.h>
#include <linux/string.h>
#include <linux/auxiliary_bus.h>
+#include "base.h"
static const struct auxiliary_device_id *auxiliary_match_id(const struct auxiliary_device_id *id,
const struct auxiliary_device *auxdev)
@@ -260,19 +261,11 @@ void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv)
}
EXPORT_SYMBOL_GPL(auxiliary_driver_unregister);
-static int __init auxiliary_bus_init(void)
+void __init auxiliary_bus_init(void)
{
- return bus_register(&auxiliary_bus_type);
+ WARN_ON(bus_register(&auxiliary_bus_type));
}
-static void __exit auxiliary_bus_exit(void)
-{
- bus_unregister(&auxiliary_bus_type);
-}
-
-module_init(auxiliary_bus_init);
-module_exit(auxiliary_bus_exit);
-
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Auxiliary Bus");
MODULE_AUTHOR("David Ertman <[email protected]>");
diff --git a/drivers/base/init.c b/drivers/base/init.c
index 908e6520e804..a9f57c22fb9e 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -32,6 +32,7 @@ void __init driver_init(void)
*/
of_core_init();
platform_bus_init();
+ auxiliary_bus_init();
cpu_dev_init();
memory_dev_init();
container_dev_init();
--
2.26.2
On Wed, Feb 10, 2021 at 01:16:11PM -0700, Dave Jiang wrote:
> When the auxiliary device code is built into the kernel, it can be executed
> before the auxiliary bus is registered. This causes bus->p to be not
> allocated and triggers a NULL pointer dereference when the auxiliary bus
> device gets added with bus_add_device(). Call the auxiliary_bus_init()
> under driver_init() so the bus is initialized before devices.
>
> Below is the kernel splat for the bug:
> [ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
> [ 1.950670] #PF: supervisor read access in kernel mode
> [ 1.950670] #PF: error_code(0x0000) - not-present page
> [ 1.950670] PGD 0
> [ 1.950670] Oops: 0000 1 SMP NOPTI
> [ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
> [ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
> [ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
> [ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
> 78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
> [ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
> [ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
> [ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
> [ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
> [ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
> [ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
> [ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
> [ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
> [ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> [ 1.950670] PKRU: 55555554
> [ 1.950670] Call Trace:
> [ 1.950670] device_add+0x3ee/0x850
> [ 1.950670] __auxiliary_device_add+0x47/0x60
> [ 1.950670] idxd_pci_probe+0xf77/0x1180
> [ 1.950670] local_pci_probe+0x4a/0x90
> [ 1.950670] pci_device_probe+0xff/0x1b0
> [ 1.950670] really_probe+0x1cf/0x440
> [ 1.950670] ? rdinit_setup+0x31/0x31
> [ 1.950670] driver_probe_device+0xe8/0x150
> [ 1.950670] device_driver_attach+0x58/0x60
> [ 1.950670] __driver_attach+0x8f/0x150
> [ 1.950670] ? device_driver_attach+0x60/0x60
> [ 1.950670] ? device_driver_attach+0x60/0x60
> [ 1.950670] bus_for_each_dev+0x79/0xc0
> [ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
> [ 1.950670] driver_attach+0x1e/0x20
> [ 1.950670] bus_add_driver+0x154/0x1f0
> [ 1.950670] driver_register+0x70/0xc0
> [ 1.950670] __pci_register_driver+0x54/0x60
> [ 1.950670] idxd_init_module+0xe2/0xfc
> [ 1.950670] ? idma64_platform_driver_init+0x19/0x19
> [ 1.950670] do_one_initcall+0x4a/0x1e0
> [ 1.950670] kernel_init_freeable+0x1fc/0x25c
> [ 1.950670] ? rest_init+0xba/0xba
> [ 1.950670] kernel_init+0xe/0x116
> [ 1.950670] ret_from_fork+0x1f/0x30
> [ 1.950670] Modules linked in:
> [ 1.950670] CR2: 0000000000000060
> [ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
>
> Fixes: 7de3697e9cbd ("Add auxiliary bus support")
> Reported-by: Jacob Pan <[email protected]>
> Acked-by: Dave Ertman <[email protected]>
> Reviewed-by: Dan Williams <[email protected]>
> Signed-off-by: Dave Jiang <[email protected]>
> ---
>
> v3:
> - Change init function to return void. (GregKH)
> v2:
> - Call in driver_init() to ensure aux bus gets init before devices. (GregKH)
>
> drivers/base/base.h | 5 +++++
> drivers/base/auxiliary.c | 13 +++----------
> drivers/base/init.c | 1 +
> 3 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/base/base.h b/drivers/base/base.h
> index f5600a83124f..52b3d7b75c27 100644
> --- a/drivers/base/base.h
> +++ b/drivers/base/base.h
> @@ -119,6 +119,11 @@ static inline int hypervisor_init(void) { return 0; }
> extern int platform_bus_init(void);
> extern void cpu_dev_init(void);
> extern void container_dev_init(void);
> +#ifdef CONFIG_AUXILIARY_BUS
> +extern void auxiliary_bus_init(void);
> +#else
> +static inline void auxiliary_bus_init(void) { }
> +#endif
>
> struct kobject *virtual_device_parent(struct device *dev);
>
> diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
> index 8336535f1e11..d8b314e7d0fd 100644
> --- a/drivers/base/auxiliary.c
> +++ b/drivers/base/auxiliary.c
> @@ -15,6 +15,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/string.h>
> #include <linux/auxiliary_bus.h>
> +#include "base.h"
>
> static const struct auxiliary_device_id *auxiliary_match_id(const struct auxiliary_device_id *id,
> const struct auxiliary_device *auxdev)
> @@ -260,19 +261,11 @@ void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv)
> }
> EXPORT_SYMBOL_GPL(auxiliary_driver_unregister);
>
> -static int __init auxiliary_bus_init(void)
> +void __init auxiliary_bus_init(void)
> {
> - return bus_register(&auxiliary_bus_type);
> + WARN_ON(bus_register(&auxiliary_bus_type));
If this fails you have worse problems, what is this WARN_ON() going to
help with except give you a crashdump right before something else in the
kernel dies?
Feels frivilous to me, but oh well, I'll take it for now...
thanks,
greg k-h
On Wed, Feb 10, 2021 at 01:16:11PM -0700, Dave Jiang wrote:
> MODULE_LICENSE("GPL v2");
> MODULE_DESCRIPTION("Auxiliary Bus");
> MODULE_AUTHOR("David Ertman <[email protected]>");
As this code can not be built as a module, can you remove these lines as
well? I don't think they do anything, and were never needed.
thanks,
greg k-h
On 2/11/2021 12:44 AM, Greg KH wrote:
> On Wed, Feb 10, 2021 at 01:16:11PM -0700, Dave Jiang wrote:
>> MODULE_LICENSE("GPL v2");
>> MODULE_DESCRIPTION("Auxiliary Bus");
>> MODULE_AUTHOR("David Ertman <[email protected]>");
> As this code can not be built as a module, can you remove these lines as
> well? I don't think they do anything, and were never needed.
Ok I will remove them.
> thanks,
>
> greg k-h
On 2/10/2021 11:54 PM, Greg KH wrote:
> On Wed, Feb 10, 2021 at 01:16:11PM -0700, Dave Jiang wrote:
>> When the auxiliary device code is built into the kernel, it can be executed
>> before the auxiliary bus is registered. This causes bus->p to be not
>> allocated and triggers a NULL pointer dereference when the auxiliary bus
>> device gets added with bus_add_device(). Call the auxiliary_bus_init()
>> under driver_init() so the bus is initialized before devices.
>>
>> Below is the kernel splat for the bug:
>> [ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
>> [ 1.950670] #PF: supervisor read access in kernel mode
>> [ 1.950670] #PF: error_code(0x0000) - not-present page
>> [ 1.950670] PGD 0
>> [ 1.950670] Oops: 0000 1 SMP NOPTI
>> [ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
>> [ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
>> [ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
>> [ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
>> 78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
>> [ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
>> [ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
>> [ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
>> [ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
>> [ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
>> [ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
>> [ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
>> [ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
>> [ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
>> [ 1.950670] PKRU: 55555554
>> [ 1.950670] Call Trace:
>> [ 1.950670] device_add+0x3ee/0x850
>> [ 1.950670] __auxiliary_device_add+0x47/0x60
>> [ 1.950670] idxd_pci_probe+0xf77/0x1180
>> [ 1.950670] local_pci_probe+0x4a/0x90
>> [ 1.950670] pci_device_probe+0xff/0x1b0
>> [ 1.950670] really_probe+0x1cf/0x440
>> [ 1.950670] ? rdinit_setup+0x31/0x31
>> [ 1.950670] driver_probe_device+0xe8/0x150
>> [ 1.950670] device_driver_attach+0x58/0x60
>> [ 1.950670] __driver_attach+0x8f/0x150
>> [ 1.950670] ? device_driver_attach+0x60/0x60
>> [ 1.950670] ? device_driver_attach+0x60/0x60
>> [ 1.950670] bus_for_each_dev+0x79/0xc0
>> [ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
>> [ 1.950670] driver_attach+0x1e/0x20
>> [ 1.950670] bus_add_driver+0x154/0x1f0
>> [ 1.950670] driver_register+0x70/0xc0
>> [ 1.950670] __pci_register_driver+0x54/0x60
>> [ 1.950670] idxd_init_module+0xe2/0xfc
>> [ 1.950670] ? idma64_platform_driver_init+0x19/0x19
>> [ 1.950670] do_one_initcall+0x4a/0x1e0
>> [ 1.950670] kernel_init_freeable+0x1fc/0x25c
>> [ 1.950670] ? rest_init+0xba/0xba
>> [ 1.950670] kernel_init+0xe/0x116
>> [ 1.950670] ret_from_fork+0x1f/0x30
>> [ 1.950670] Modules linked in:
>> [ 1.950670] CR2: 0000000000000060
>> [ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
>>
>> Fixes: 7de3697e9cbd ("Add auxiliary bus support")
>> Reported-by: Jacob Pan <[email protected]>
>> Acked-by: Dave Ertman <[email protected]>
>> Reviewed-by: Dan Williams <[email protected]>
>> Signed-off-by: Dave Jiang <[email protected]>
>> ---
>>
>> v3:
>> - Change init function to return void. (GregKH)
>> v2:
>> - Call in driver_init() to ensure aux bus gets init before devices. (GregKH)
>>
>> drivers/base/base.h | 5 +++++
>> drivers/base/auxiliary.c | 13 +++----------
>> drivers/base/init.c | 1 +
>> 3 files changed, 9 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/base/base.h b/drivers/base/base.h
>> index f5600a83124f..52b3d7b75c27 100644
>> --- a/drivers/base/base.h
>> +++ b/drivers/base/base.h
>> @@ -119,6 +119,11 @@ static inline int hypervisor_init(void) { return 0; }
>> extern int platform_bus_init(void);
>> extern void cpu_dev_init(void);
>> extern void container_dev_init(void);
>> +#ifdef CONFIG_AUXILIARY_BUS
>> +extern void auxiliary_bus_init(void);
>> +#else
>> +static inline void auxiliary_bus_init(void) { }
>> +#endif
>>
>> struct kobject *virtual_device_parent(struct device *dev);
>>
>> diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
>> index 8336535f1e11..d8b314e7d0fd 100644
>> --- a/drivers/base/auxiliary.c
>> +++ b/drivers/base/auxiliary.c
>> @@ -15,6 +15,7 @@
>> #include <linux/pm_runtime.h>
>> #include <linux/string.h>
>> #include <linux/auxiliary_bus.h>
>> +#include "base.h"
>>
>> static const struct auxiliary_device_id *auxiliary_match_id(const struct auxiliary_device_id *id,
>> const struct auxiliary_device *auxdev)
>> @@ -260,19 +261,11 @@ void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv)
>> }
>> EXPORT_SYMBOL_GPL(auxiliary_driver_unregister);
>>
>> -static int __init auxiliary_bus_init(void)
>> +void __init auxiliary_bus_init(void)
>> {
>> - return bus_register(&auxiliary_bus_type);
>> + WARN_ON(bus_register(&auxiliary_bus_type));
> If this fails you have worse problems, what is this WARN_ON() going to
> help with except give you a crashdump right before something else in the
> kernel dies?
My thinking was that it would point to the area of failure rather than
much later down the road, and the person debugging can know where it
failed. Also, gcc v10 is no longer happy with (void) bus_register() and
complains. If there's a different way you'd rather do this please advise.
>
> Feels frivilous to me, but oh well, I'll take it for now...
>
> thanks,
>
> greg k-h
On Thu, Feb 11, 2021 at 09:21:29AM -0700, Dave Jiang wrote:
>
> On 2/10/2021 11:54 PM, Greg KH wrote:
> > On Wed, Feb 10, 2021 at 01:16:11PM -0700, Dave Jiang wrote:
> > > When the auxiliary device code is built into the kernel, it can be executed
> > > before the auxiliary bus is registered. This causes bus->p to be not
> > > allocated and triggers a NULL pointer dereference when the auxiliary bus
> > > device gets added with bus_add_device(). Call the auxiliary_bus_init()
> > > under driver_init() so the bus is initialized before devices.
> > >
> > > Below is the kernel splat for the bug:
> > > [ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
> > > [ 1.950670] #PF: supervisor read access in kernel mode
> > > [ 1.950670] #PF: error_code(0x0000) - not-present page
> > > [ 1.950670] PGD 0
> > > [ 1.950670] Oops: 0000 1 SMP NOPTI
> > > [ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
> > > [ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
> > > [ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
> > > [ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
> > > 78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
> > > [ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
> > > [ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
> > > [ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
> > > [ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
> > > [ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
> > > [ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
> > > [ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
> > > [ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
> > > [ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > [ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > > [ 1.950670] PKRU: 55555554
> > > [ 1.950670] Call Trace:
> > > [ 1.950670] device_add+0x3ee/0x850
> > > [ 1.950670] __auxiliary_device_add+0x47/0x60
> > > [ 1.950670] idxd_pci_probe+0xf77/0x1180
> > > [ 1.950670] local_pci_probe+0x4a/0x90
> > > [ 1.950670] pci_device_probe+0xff/0x1b0
> > > [ 1.950670] really_probe+0x1cf/0x440
> > > [ 1.950670] ? rdinit_setup+0x31/0x31
> > > [ 1.950670] driver_probe_device+0xe8/0x150
> > > [ 1.950670] device_driver_attach+0x58/0x60
> > > [ 1.950670] __driver_attach+0x8f/0x150
> > > [ 1.950670] ? device_driver_attach+0x60/0x60
> > > [ 1.950670] ? device_driver_attach+0x60/0x60
> > > [ 1.950670] bus_for_each_dev+0x79/0xc0
> > > [ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
> > > [ 1.950670] driver_attach+0x1e/0x20
> > > [ 1.950670] bus_add_driver+0x154/0x1f0
> > > [ 1.950670] driver_register+0x70/0xc0
> > > [ 1.950670] __pci_register_driver+0x54/0x60
> > > [ 1.950670] idxd_init_module+0xe2/0xfc
> > > [ 1.950670] ? idma64_platform_driver_init+0x19/0x19
> > > [ 1.950670] do_one_initcall+0x4a/0x1e0
> > > [ 1.950670] kernel_init_freeable+0x1fc/0x25c
> > > [ 1.950670] ? rest_init+0xba/0xba
> > > [ 1.950670] kernel_init+0xe/0x116
> > > [ 1.950670] ret_from_fork+0x1f/0x30
> > > [ 1.950670] Modules linked in:
> > > [ 1.950670] CR2: 0000000000000060
> > > [ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
> > >
> > > Fixes: 7de3697e9cbd ("Add auxiliary bus support")
> > > Reported-by: Jacob Pan <[email protected]>
> > > Acked-by: Dave Ertman <[email protected]>
> > > Reviewed-by: Dan Williams <[email protected]>
> > > Signed-off-by: Dave Jiang <[email protected]>
> > > ---
> > >
> > > v3:
> > > - Change init function to return void. (GregKH)
> > > v2:
> > > - Call in driver_init() to ensure aux bus gets init before devices. (GregKH)
> > >
> > > drivers/base/base.h | 5 +++++
> > > drivers/base/auxiliary.c | 13 +++----------
> > > drivers/base/init.c | 1 +
> > > 3 files changed, 9 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/base/base.h b/drivers/base/base.h
> > > index f5600a83124f..52b3d7b75c27 100644
> > > --- a/drivers/base/base.h
> > > +++ b/drivers/base/base.h
> > > @@ -119,6 +119,11 @@ static inline int hypervisor_init(void) { return 0; }
> > > extern int platform_bus_init(void);
> > > extern void cpu_dev_init(void);
> > > extern void container_dev_init(void);
> > > +#ifdef CONFIG_AUXILIARY_BUS
> > > +extern void auxiliary_bus_init(void);
> > > +#else
> > > +static inline void auxiliary_bus_init(void) { }
> > > +#endif
> > > struct kobject *virtual_device_parent(struct device *dev);
> > > diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
> > > index 8336535f1e11..d8b314e7d0fd 100644
> > > --- a/drivers/base/auxiliary.c
> > > +++ b/drivers/base/auxiliary.c
> > > @@ -15,6 +15,7 @@
> > > #include <linux/pm_runtime.h>
> > > #include <linux/string.h>
> > > #include <linux/auxiliary_bus.h>
> > > +#include "base.h"
> > > static const struct auxiliary_device_id *auxiliary_match_id(const struct auxiliary_device_id *id,
> > > const struct auxiliary_device *auxdev)
> > > @@ -260,19 +261,11 @@ void auxiliary_driver_unregister(struct auxiliary_driver *auxdrv)
> > > }
> > > EXPORT_SYMBOL_GPL(auxiliary_driver_unregister);
> > > -static int __init auxiliary_bus_init(void)
> > > +void __init auxiliary_bus_init(void)
> > > {
> > > - return bus_register(&auxiliary_bus_type);
> > > + WARN_ON(bus_register(&auxiliary_bus_type));
> > If this fails you have worse problems, what is this WARN_ON() going to
> > help with except give you a crashdump right before something else in the
> > kernel dies?
>
> My thinking was that it would point to the area of failure rather than much
> later down the road, and the person debugging can know where it failed.
> Also, gcc v10 is no longer happy with (void) bus_register() and complains.
> If there's a different way you'd rather do this please advise.
Ah, yeah, I forgot it was a __must_check function. Ok, let's leave it
like this, as in a way, it's nicer than what happens when the platform
bus code fails to initialize :)
thanks,
greg k-h