The patch supports slave mode for imx I2C driver
Signed-off-by: Biwen Li <[email protected]>
---
Change in v5:
- fix a bug that cannot determine in what mode(master mode or
slave mode)
Change in v4:
- add MACRO CONFIG_I2C_SLAVE to fix compilation issue
Change in v3:
- support layerscape and i.mx platform
Change in v2:
- remove MACRO CONFIG_I2C_SLAVE
drivers/i2c/busses/i2c-imx.c | 216 ++++++++++++++++++++++++++++++++---
1 file changed, 198 insertions(+), 18 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index a3b61336fe55..52f70de16900 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -203,6 +203,9 @@ struct imx_i2c_struct {
struct pinctrl_state *pinctrl_pins_gpio;
struct imx_i2c_dma *dma;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ struct i2c_client *slave;
+#endif
};
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
@@ -279,6 +282,14 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
}
+/* Set up i2c controller register and i2c status register to default value. */
+static void i2c_imx_reset_regs(struct imx_i2c_struct *i2c_imx)
+{
+ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+ i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+}
+
/* Functions for DMA support */
static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
dma_addr_t phy_addr)
@@ -588,23 +599,33 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
}
-static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
+/* Clear interrupt flag bit */
+static void i2c_imx_clr_if_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
{
- struct imx_i2c_struct *i2c_imx = dev_id;
- unsigned int temp;
+ status &= ~I2SR_IIF;
+ status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+ imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
+}
- temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
- if (temp & I2SR_IIF) {
- /* save status register */
- i2c_imx->i2csr = temp;
- temp &= ~I2SR_IIF;
- temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
- wake_up(&i2c_imx->queue);
- return IRQ_HANDLED;
- }
+/* Clear arbitration lost bit */
+static void i2c_imx_clr_al_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
+{
+ status &= ~I2SR_IAL;
+ status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
+ imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
+}
- return IRQ_NONE;
+static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int status;
+
+ /* Save status register */
+ status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ i2c_imx->i2csr = status | I2SR_IIF;
+
+ wake_up(&i2c_imx->queue);
+
+ return IRQ_HANDLED;
}
static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
@@ -900,6 +921,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ if (i2c_imx->slave) {
+ dev_err(&i2c_imx->adapter.dev, "Please not do operations of master mode in slave mode");
+ return -EBUSY;
+ }
+#endif
+
result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
if (result < 0)
goto out;
@@ -1048,11 +1076,166 @@ static u32 i2c_imx_func(struct i2c_adapter *adapter)
| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
+{
+ int temp;
+
+ /* Resume */
+ temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+ if (temp < 0) {
+ dev_err(&i2c_imx->adapter.dev, "failed to resume i2c controller");
+ return temp;
+ }
+
+ /* Set slave addr. */
+ imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx, IMX_I2C_IADR);
+
+ i2c_imx_reset_regs(i2c_imx);
+
+ /* Enable module */
+ temp = i2c_imx->hwdata->i2cr_ien_opcode;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* Enable interrupt from i2c module */
+ temp |= I2CR_IIEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* Wait controller to be stable */
+ usleep_range(50, 150);
+ return 0;
+}
+
+static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx)
+{
+ unsigned int status, ctl;
+ u8 value;
+
+ if (!i2c_imx->slave) {
+ dev_err(&i2c_imx->adapter.dev, "cannot deal with slave irq,i2c_imx->slave is null");
+ return IRQ_NONE;
+ }
+
+ status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ if (status & I2SR_IAL) { /* Arbitration lost */
+ i2c_imx_clr_al_bit(status, i2c_imx);
+ } else if (status & I2SR_IAAS) { /* Addressed as a slave */
+ if (status & I2SR_SRW) { /* Master wants to read from us*/
+ dev_dbg(&i2c_imx->adapter.dev, "read requested");
+ i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+ /* Slave transmit */
+ ctl |= I2CR_MTX;
+ imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
+
+ /* Send data */
+ imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
+ } else { /* Master wants to write to us */
+ dev_dbg(&i2c_imx->adapter.dev, "write requested");
+ i2c_slave_event(i2c_imx->slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ /* Slave receive */
+ ctl &= ~I2CR_MTX;
+ imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
+ /* Dummy read */
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ }
+ } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
+ if (status & I2SR_IBB) { /* No STOP signal detected */
+ ctl &= ~I2CR_MTX;
+ imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
+
+ value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ i2c_slave_event(i2c_imx->slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+ } else { /* STOP signal is detected */
+ dev_dbg(&i2c_imx->adapter.dev,
+ "STOP signal detected");
+ i2c_slave_event(i2c_imx->slave, I2C_SLAVE_STOP, &value);
+ }
+ } else if (!(status & I2SR_RXAK)) { /* Transmit mode received ACK */
+ ctl |= I2CR_MTX;
+ imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
+
+ i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_PROCESSED, &value);
+
+ imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
+ } else { /* Transmit mode received NAK */
+ ctl &= ~I2CR_MTX;
+ imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
+ imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ }
+ return IRQ_HANDLED;
+}
+
+static int i2c_imx_reg_slave(struct i2c_client *client)
+{
+ struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
+ int ret;
+ if (i2c_imx->slave)
+ return -EBUSY;
+
+ i2c_imx->slave = client;
+
+ ret = i2c_imx_slave_init(i2c_imx);
+ if (ret < 0)
+ dev_err(&i2c_imx->adapter.dev, "failed to switch to slave mode");
+
+ return ret;
+}
+
+static int i2c_imx_unreg_slave(struct i2c_client *client)
+{
+ struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
+ int ret;
+
+ if (!i2c_imx->slave)
+ return -EINVAL;
+
+ /* Reset slave address. */
+ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+
+ i2c_imx_reset_regs(i2c_imx);
+
+ i2c_imx->slave = NULL;
+
+ /* Suspend */
+ ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
+ if (ret < 0)
+ dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c controller");
+
+ return ret;
+}
+#endif
+
static const struct i2c_algorithm i2c_imx_algo = {
.master_xfer = i2c_imx_xfer,
.functionality = i2c_imx_func,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ .reg_slave = i2c_imx_reg_slave,
+ .unreg_slave = i2c_imx_unreg_slave,
+#endif
};
+static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
+{
+ struct imx_i2c_struct *i2c_imx = dev_id;
+ unsigned int status;
+
+ status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+
+ if (status & I2SR_IIF) {
+ i2c_imx_clr_if_bit(status, i2c_imx);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ if (i2c_imx->slave)
+ return i2c_imx_slave_isr(i2c_imx);
+#endif
+ return i2c_imx_master_isr(i2c_imx);
+ }
+
+ return IRQ_NONE;
+}
+
static int i2c_imx_probe(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx;
@@ -1148,10 +1331,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
- /* Set up chip registers to defaults */
- imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
- i2c_imx, IMX_I2C_I2CR);
- imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_reset_regs(i2c_imx);
/* Init optional bus recovery function */
ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
--
2.17.1
> -----Original Message-----
> From: Biwen Li <[email protected]>
> Sent: Friday, November 29, 2019 17:05
> To: [email protected]; [email protected];
> [email protected]; [email protected]; dl-linux-imx <linux-
> [email protected]>; [email protected]; Leo Li <[email protected]>;
> Aisheng Dong <[email protected]>; Clark Wang
> <[email protected]>; [email protected]
> Cc: [email protected]; [email protected]; linux-arm-
> [email protected]; Laurentiu Tudor <[email protected]>;
> Jiafei Pan <[email protected]>; Xiaobo Xie <[email protected]>; Biwen
> Li <[email protected]>
> Subject: [v5] i2c: imx: support slave mode for imx I2C driver
>
> The patch supports slave mode for imx I2C driver
>
> Signed-off-by: Biwen Li <[email protected]>
> ---
> Change in v5:
> - fix a bug that cannot determine in what mode(master mode or
> slave mode)
>
> Change in v4:
> - add MACRO CONFIG_I2C_SLAVE to fix compilation issue
>
> Change in v3:
> - support layerscape and i.mx platform
>
> Change in v2:
> - remove MACRO CONFIG_I2C_SLAVE
>
>
> drivers/i2c/busses/i2c-imx.c | 216
> ++++++++++++++++++++++++++++++++---
> 1 file changed, 198 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index
> a3b61336fe55..52f70de16900 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -203,6 +203,9 @@ struct imx_i2c_struct {
> struct pinctrl_state *pinctrl_pins_gpio;
>
> struct imx_i2c_dma *dma;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + struct i2c_client *slave;
> +#endif
> };
>
> static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -279,6 +282,14
> @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct
> *i2c_imx,
> return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift)); }
>
> +/* Set up i2c controller register and i2c status register to default
> +value. */ static void i2c_imx_reset_regs(struct imx_i2c_struct
> +*i2c_imx) {
> + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> + i2c_imx, IMX_I2C_I2CR);
> + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx,
> +IMX_I2C_I2SR); }
> +
> /* Functions for DMA support */
> static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> dma_addr_t phy_addr)
> @@ -588,23 +599,33 @@ static void i2c_imx_stop(struct imx_i2c_struct
> *i2c_imx)
> imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); }
>
> -static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> +/* Clear interrupt flag bit */
> +static void i2c_imx_clr_if_bit(unsigned int status, struct
> +imx_i2c_struct *i2c_imx)
> {
> - struct imx_i2c_struct *i2c_imx = dev_id;
> - unsigned int temp;
> + status &= ~I2SR_IIF;
> + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
>
> - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> - if (temp & I2SR_IIF) {
> - /* save status register */
> - i2c_imx->i2csr = temp;
> - temp &= ~I2SR_IIF;
> - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
> - wake_up(&i2c_imx->queue);
> - return IRQ_HANDLED;
> - }
> +/* Clear arbitration lost bit */
> +static void i2c_imx_clr_al_bit(unsigned int status, struct
> +imx_i2c_struct *i2c_imx) {
> + status &= ~I2SR_IAL;
> + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
> + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
>
> - return IRQ_NONE;
> +static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx) {
> + unsigned int status;
> +
> + /* Save status register */
> + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + i2c_imx->i2csr = status | I2SR_IIF;
> +
> + wake_up(&i2c_imx->queue);
> +
> + return IRQ_HANDLED;
> }
Hi Biwen,
We only use i2c_imx->i2csr for IIF judgement in i2c_imx_trx_complete(), can we use this code:
static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
{
i2c_imx->i2csr = I2SR_IIF;
wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
Or even put these three lines to isr function directly?
i2c_imx_master_isr() is only called when if (status & I2SR_IIF) is true, so no need to read register again here.
Regards,
Clark Wang
>
> static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, @@ -900,6
> +921,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
>
> dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
>
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + if (i2c_imx->slave) {
> + dev_err(&i2c_imx->adapter.dev, "Please not do operations
> of master mode in slave mode");
> + return -EBUSY;
> + }
> +#endif
> +
> result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> if (result < 0)
> goto out;
> @@ -1048,11 +1076,166 @@ static u32 i2c_imx_func(struct i2c_adapter
> *adapter)
> | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> }
>
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx) {
> + int temp;
> +
> + /* Resume */
> + temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> + if (temp < 0) {
> + dev_err(&i2c_imx->adapter.dev, "failed to resume i2c
> controller");
> + return temp;
> + }
> +
> + /* Set slave addr. */
> + imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx,
> IMX_I2C_IADR);
> +
> + i2c_imx_reset_regs(i2c_imx);
> +
> + /* Enable module */
> + temp = i2c_imx->hwdata->i2cr_ien_opcode;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* Enable interrupt from i2c module */
> + temp |= I2CR_IIEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* Wait controller to be stable */
> + usleep_range(50, 150);
> + return 0;
> +}
> +
> +static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx) {
> + unsigned int status, ctl;
> + u8 value;
> +
> + if (!i2c_imx->slave) {
> + dev_err(&i2c_imx->adapter.dev, "cannot deal with slave
> irq,i2c_imx->slave is null");
> + return IRQ_NONE;
> + }
> +
> + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + if (status & I2SR_IAL) { /* Arbitration lost */
> + i2c_imx_clr_al_bit(status, i2c_imx);
> + } else if (status & I2SR_IAAS) { /* Addressed as a slave */
> + if (status & I2SR_SRW) { /* Master wants to read from us*/
> + dev_dbg(&i2c_imx->adapter.dev, "read requested");
> + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_READ_REQUESTED, &value);
> +
> + /* Slave transmit */
> + ctl |= I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> +
> + /* Send data */
> + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> + } else { /* Master wants to write to us */
> + dev_dbg(&i2c_imx->adapter.dev, "write requested");
> + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_WRITE_REQUESTED, &value);
> +
> + /* Slave receive */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> + /* Dummy read */
> + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + }
> + } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
> + if (status & I2SR_IBB) { /* No STOP signal detected */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx,
> IMX_I2C_I2CR);
> +
> + value = imx_i2c_read_reg(i2c_imx,
> IMX_I2C_I2DR);
> + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_WRITE_RECEIVED, &value);
> + } else { /* STOP signal is detected */
> + dev_dbg(&i2c_imx->adapter.dev,
> + "STOP signal detected");
> + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_STOP, &value);
> + }
> + } else if (!(status & I2SR_RXAK)) { /* Transmit mode received
> ACK */
> + ctl |= I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> +
> + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_READ_PROCESSED, &value);
> +
> + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> + } else { /* Transmit mode received NAK */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + }
> + return IRQ_HANDLED;
> +}
> +
> +static int i2c_imx_reg_slave(struct i2c_client *client) {
> + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> + int ret;
> + if (i2c_imx->slave)
> + return -EBUSY;
> +
> + i2c_imx->slave = client;
> +
> + ret = i2c_imx_slave_init(i2c_imx);
> + if (ret < 0)
> + dev_err(&i2c_imx->adapter.dev, "failed to switch to slave
> mode");
> +
> + return ret;
> +}
> +
> +static int i2c_imx_unreg_slave(struct i2c_client *client) {
> + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> + int ret;
> +
> + if (!i2c_imx->slave)
> + return -EINVAL;
> +
> + /* Reset slave address. */
> + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> +
> + i2c_imx_reset_regs(i2c_imx);
> +
> + i2c_imx->slave = NULL;
> +
> + /* Suspend */
> + ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
> + if (ret < 0)
> + dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c
> controller");
> +
> + return ret;
> +}
> +#endif
> +
> static const struct i2c_algorithm i2c_imx_algo = {
> .master_xfer = i2c_imx_xfer,
> .functionality = i2c_imx_func,
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + .reg_slave = i2c_imx_reg_slave,
> + .unreg_slave = i2c_imx_unreg_slave,
> +#endif
> };
>
> +static irqreturn_t i2c_imx_isr(int irq, void *dev_id) {
> + struct imx_i2c_struct *i2c_imx = dev_id;
> + unsigned int status;
> +
> + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> +
> + if (status & I2SR_IIF) {
> + i2c_imx_clr_if_bit(status, i2c_imx);
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + if (i2c_imx->slave)
> + return i2c_imx_slave_isr(i2c_imx);
> +#endif
> + return i2c_imx_master_isr(i2c_imx);
> + }
> +
> + return IRQ_NONE;
> +}
> +
> static int i2c_imx_probe(struct platform_device *pdev) {
> struct imx_i2c_struct *i2c_imx;
> @@ -1148,10 +1331,7 @@ static int i2c_imx_probe(struct platform_device
> *pdev)
> clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
> i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
>
> - /* Set up chip registers to defaults */
> - imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> - i2c_imx, IMX_I2C_I2CR);
> - imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx,
> IMX_I2C_I2SR);
> + i2c_imx_reset_regs(i2c_imx);
>
> /* Init optional bus recovery function */
> ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
> --
> 2.17.1
>
>
> > -----Original Message-----
> > From: Biwen Li <[email protected]>
> > Sent: Friday, November 29, 2019 17:05
> > To: [email protected]; [email protected];
> > [email protected]; [email protected]; dl-linux-imx <linux-
> > [email protected]>; [email protected]; Leo Li <[email protected]>; Aisheng
> > Dong <[email protected]>; Clark Wang <[email protected]>;
> > [email protected]
> > Cc: [email protected]; [email protected];
> > linux-arm- [email protected]; Laurentiu Tudor
> > <[email protected]>; Jiafei Pan <[email protected]>; Xiaobo Xie
> > <[email protected]>; Biwen Li <[email protected]>
> > Subject: [v5] i2c: imx: support slave mode for imx I2C driver
> >
> > The patch supports slave mode for imx I2C driver
> >
> > Signed-off-by: Biwen Li <[email protected]>
> > ---
> > Change in v5:
> > - fix a bug that cannot determine in what mode(master mode or
> > slave mode)
> >
> > Change in v4:
> > - add MACRO CONFIG_I2C_SLAVE to fix compilation issue
> >
> > Change in v3:
> > - support layerscape and i.mx platform
> >
> > Change in v2:
> > - remove MACRO CONFIG_I2C_SLAVE
> >
> >
> > drivers/i2c/busses/i2c-imx.c | 216
> > ++++++++++++++++++++++++++++++++---
> > 1 file changed, 198 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index
> > a3b61336fe55..52f70de16900 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -203,6 +203,9 @@ struct imx_i2c_struct {
> > struct pinctrl_state *pinctrl_pins_gpio;
> >
> > struct imx_i2c_dma *dma;
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > + struct i2c_client *slave;
> > +#endif
> > };
> >
> > static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -279,6
> > +282,14 @@ static inline unsigned char imx_i2c_read_reg(struct
> > imx_i2c_struct *i2c_imx,
> > return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift)); }
> >
> > +/* Set up i2c controller register and i2c status register to default
> > +value. */ static void i2c_imx_reset_regs(struct imx_i2c_struct
> > +*i2c_imx) {
> > + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> > + i2c_imx, IMX_I2C_I2CR);
> > + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx,
> > +IMX_I2C_I2SR); }
> > +
> > /* Functions for DMA support */
> > static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> > dma_addr_t phy_addr)
> > @@ -588,23 +599,33 @@ static void i2c_imx_stop(struct imx_i2c_struct
> > *i2c_imx)
> > imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); }
> >
> > -static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> > +/* Clear interrupt flag bit */
> > +static void i2c_imx_clr_if_bit(unsigned int status, struct
> > +imx_i2c_struct *i2c_imx)
> > {
> > - struct imx_i2c_struct *i2c_imx = dev_id;
> > - unsigned int temp;
> > + status &= ~I2SR_IIF;
> > + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> > + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
> >
> > - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > - if (temp & I2SR_IIF) {
> > - /* save status register */
> > - i2c_imx->i2csr = temp;
> > - temp &= ~I2SR_IIF;
> > - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> > - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
> > - wake_up(&i2c_imx->queue);
> > - return IRQ_HANDLED;
> > - }
> > +/* Clear arbitration lost bit */
> > +static void i2c_imx_clr_al_bit(unsigned int status, struct
> > +imx_i2c_struct *i2c_imx) {
> > + status &= ~I2SR_IAL;
> > + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
> > + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
> >
> > - return IRQ_NONE;
> > +static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx) {
> > + unsigned int status;
> > +
> > + /* Save status register */
> > + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > + i2c_imx->i2csr = status | I2SR_IIF;
> > +
> > + wake_up(&i2c_imx->queue);
> > +
> > + return IRQ_HANDLED;
> > }
>
> Hi Biwen,
>
> We only use i2c_imx->i2csr for IIF judgement in i2c_imx_trx_complete(), can we
Currently maybe we just use the I2SR_IIF, but other bit of i2c status register will be used
in the future.
In another hand, i2csr represent value in i2c status register, unless we changed the meaning.
> use this code:
> static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx) {
> i2c_imx->i2csr = I2SR_IIF;
>
> wake_up(&i2c_imx->queue);
>
> return IRQ_HANDLED;
> }
> Or even put these three lines to isr function directly?
> i2c_imx_master_isr() is only called when if (status & I2SR_IIF) is true, so no need
> to read register again here.
I add i2c_imx_master_isr to let the code clearly. Although read register again, but with advanced compiler
and more powerfull cpu, the performance won't have significant impact.
Thank you for your suggestions.
Best Regards,
Biwen Li
>
> Regards,
> Clark Wang
>
>
> >
> > static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, @@
> > -900,6
> > +921,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
> >
> > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
> >
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > + if (i2c_imx->slave) {
> > + dev_err(&i2c_imx->adapter.dev, "Please not do operations
> > of master mode in slave mode");
> > + return -EBUSY;
> > + }
> > +#endif
> > +
> > result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > if (result < 0)
> > goto out;
> > @@ -1048,11 +1076,166 @@ static u32 i2c_imx_func(struct i2c_adapter
> > *adapter)
> > | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> > }
> >
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > +static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx) {
> > + int temp;
> > +
> > + /* Resume */
> > + temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > + if (temp < 0) {
> > + dev_err(&i2c_imx->adapter.dev, "failed to resume i2c
> > controller");
> > + return temp;
> > + }
> > +
> > + /* Set slave addr. */
> > + imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx,
> > IMX_I2C_IADR);
> > +
> > + i2c_imx_reset_regs(i2c_imx);
> > +
> > + /* Enable module */
> > + temp = i2c_imx->hwdata->i2cr_ien_opcode;
> > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> > +
> > + /* Enable interrupt from i2c module */
> > + temp |= I2CR_IIEN;
> > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> > +
> > + /* Wait controller to be stable */
> > + usleep_range(50, 150);
> > + return 0;
> > +}
> > +
> > +static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx) {
> > + unsigned int status, ctl;
> > + u8 value;
> > +
> > + if (!i2c_imx->slave) {
> > + dev_err(&i2c_imx->adapter.dev, "cannot deal with slave
> > irq,i2c_imx->slave is null");
> > + return IRQ_NONE;
> > + }
> > +
> > + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > + ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> > + if (status & I2SR_IAL) { /* Arbitration lost */
> > + i2c_imx_clr_al_bit(status, i2c_imx);
> > + } else if (status & I2SR_IAAS) { /* Addressed as a slave */
> > + if (status & I2SR_SRW) { /* Master wants to read from us*/
> > + dev_dbg(&i2c_imx->adapter.dev, "read requested");
> > + i2c_slave_event(i2c_imx->slave,
> > I2C_SLAVE_READ_REQUESTED, &value);
> > +
> > + /* Slave transmit */
> > + ctl |= I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > +
> > + /* Send data */
> > + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> > + } else { /* Master wants to write to us */
> > + dev_dbg(&i2c_imx->adapter.dev, "write requested");
> > + i2c_slave_event(i2c_imx->slave,
> > I2C_SLAVE_WRITE_REQUESTED, &value);
> > +
> > + /* Slave receive */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > + /* Dummy read */
> > + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> > + }
> > + } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
> > + if (status & I2SR_IBB) { /* No STOP signal detected */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx,
> > IMX_I2C_I2CR);
> > +
> > + value = imx_i2c_read_reg(i2c_imx,
> > IMX_I2C_I2DR);
> > + i2c_slave_event(i2c_imx->slave,
> > I2C_SLAVE_WRITE_RECEIVED, &value);
> > + } else { /* STOP signal is detected */
> > + dev_dbg(&i2c_imx->adapter.dev,
> > + "STOP signal detected");
> > + i2c_slave_event(i2c_imx->slave,
> > I2C_SLAVE_STOP, &value);
> > + }
> > + } else if (!(status & I2SR_RXAK)) { /* Transmit mode received
> > ACK */
> > + ctl |= I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > +
> > + i2c_slave_event(i2c_imx->slave,
> > I2C_SLAVE_READ_PROCESSED, &value);
> > +
> > + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> > + } else { /* Transmit mode received NAK */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> > + }
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int i2c_imx_reg_slave(struct i2c_client *client) {
> > + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > + int ret;
> > + if (i2c_imx->slave)
> > + return -EBUSY;
> > +
> > + i2c_imx->slave = client;
> > +
> > + ret = i2c_imx_slave_init(i2c_imx);
> > + if (ret < 0)
> > + dev_err(&i2c_imx->adapter.dev, "failed to switch to slave
> > mode");
> > +
> > + return ret;
> > +}
> > +
> > +static int i2c_imx_unreg_slave(struct i2c_client *client) {
> > + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > + int ret;
> > +
> > + if (!i2c_imx->slave)
> > + return -EINVAL;
> > +
> > + /* Reset slave address. */
> > + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> > +
> > + i2c_imx_reset_regs(i2c_imx);
> > +
> > + i2c_imx->slave = NULL;
> > +
> > + /* Suspend */
> > + ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
> > + if (ret < 0)
> > + dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c
> > controller");
> > +
> > + return ret;
> > +}
> > +#endif
> > +
> > static const struct i2c_algorithm i2c_imx_algo = {
> > .master_xfer = i2c_imx_xfer,
> > .functionality = i2c_imx_func,
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > + .reg_slave = i2c_imx_reg_slave,
> > + .unreg_slave = i2c_imx_unreg_slave,
> > +#endif
> > };
> >
> > +static irqreturn_t i2c_imx_isr(int irq, void *dev_id) {
> > + struct imx_i2c_struct *i2c_imx = dev_id;
> > + unsigned int status;
> > +
> > + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > +
> > + if (status & I2SR_IIF) {
> > + i2c_imx_clr_if_bit(status, i2c_imx); #if
> > +IS_ENABLED(CONFIG_I2C_SLAVE)
> > + if (i2c_imx->slave)
> > + return i2c_imx_slave_isr(i2c_imx); #endif
> > + return i2c_imx_master_isr(i2c_imx);
> > + }
> > +
> > + return IRQ_NONE;
> > +}
> > +
> > static int i2c_imx_probe(struct platform_device *pdev) {
> > struct imx_i2c_struct *i2c_imx;
> > @@ -1148,10 +1331,7 @@ static int i2c_imx_probe(struct platform_device
> > *pdev)
> > clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
> > i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
> >
> > - /* Set up chip registers to defaults */
> > - imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> > - i2c_imx, IMX_I2C_I2CR);
> > - imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx,
> > IMX_I2C_I2SR);
> > + i2c_imx_reset_regs(i2c_imx);
> >
> > /* Init optional bus recovery function */
> > ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
> > --
> > 2.17.1
Hi,
Some more comments inline.
On Fri, Nov 29, 2019 at 05:05:13PM +0800, Biwen Li wrote:
> The patch supports slave mode for imx I2C driver
>
> Signed-off-by: Biwen Li <[email protected]>
> ---
> Change in v5:
> - fix a bug that cannot determine in what mode(master mode or
> slave mode)
>
> Change in v4:
> - add MACRO CONFIG_I2C_SLAVE to fix compilation issue
>
> Change in v3:
> - support layerscape and i.mx platform
>
> Change in v2:
> - remove MACRO CONFIG_I2C_SLAVE
>
>
> drivers/i2c/busses/i2c-imx.c | 216 ++++++++++++++++++++++++++++++++---
> 1 file changed, 198 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index a3b61336fe55..52f70de16900 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -203,6 +203,9 @@ struct imx_i2c_struct {
> struct pinctrl_state *pinctrl_pins_gpio;
>
> struct imx_i2c_dma *dma;
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + struct i2c_client *slave;
> +#endif
> };
>
> static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
> @@ -279,6 +282,14 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
> return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
> }
>
> +/* Set up i2c controller register and i2c status register to default value. */
> +static void i2c_imx_reset_regs(struct imx_i2c_struct *i2c_imx)
> +{
> + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> + i2c_imx, IMX_I2C_I2CR);
> + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
> +}
> +
> /* Functions for DMA support */
> static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> dma_addr_t phy_addr)
> @@ -588,23 +599,33 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
> imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> }
>
> -static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> +/* Clear interrupt flag bit */
> +static void i2c_imx_clr_if_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
> {
> - struct imx_i2c_struct *i2c_imx = dev_id;
> - unsigned int temp;
> + status &= ~I2SR_IIF;
> + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
> +}
>
> - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> - if (temp & I2SR_IIF) {
> - /* save status register */
> - i2c_imx->i2csr = temp;
> - temp &= ~I2SR_IIF;
> - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
> - wake_up(&i2c_imx->queue);
> - return IRQ_HANDLED;
> - }
> +/* Clear arbitration lost bit */
> +static void i2c_imx_clr_al_bit(unsigned int status, struct imx_i2c_struct *i2c_imx)
> +{
Can you please remove some of the really obvious comments? When a
function is named clr_al_bit, then it doesn't need a comment which says
that this function really does this. There are more comments like this
in the patch.
> + status &= ~I2SR_IAL;
> + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
> + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR);
> +}
>
> - return IRQ_NONE;
> +static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
> +{
> + unsigned int status;
> +
> + /* Save status register */
> + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + i2c_imx->i2csr = status | I2SR_IIF;
Instead of reading the status register again you could set
i2c_imx->i2csr in the caller.
> +
> + wake_up(&i2c_imx->queue);
> +
> + return IRQ_HANDLED;
> }
>
> static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
> @@ -900,6 +921,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
>
> dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
>
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> + if (i2c_imx->slave) {
> + dev_err(&i2c_imx->adapter.dev, "Please not do operations of master mode in slave mode");
> + return -EBUSY;
> + }
> +#endif
> +
> result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> if (result < 0)
> goto out;
> @@ -1048,11 +1076,166 @@ static u32 i2c_imx_func(struct i2c_adapter *adapter)
> | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> }
>
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
> +{
> + int temp;
> +
> + /* Resume */
> + temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> + if (temp < 0) {
> + dev_err(&i2c_imx->adapter.dev, "failed to resume i2c controller");
> + return temp;
> + }
> +
> + /* Set slave addr. */
> + imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx, IMX_I2C_IADR);
> +
> + i2c_imx_reset_regs(i2c_imx);
> +
> + /* Enable module */
> + temp = i2c_imx->hwdata->i2cr_ien_opcode;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* Enable interrupt from i2c module */
> + temp |= I2CR_IIEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
Do these have to be two register accesses?
> +
> + /* Wait controller to be stable */
> + usleep_range(50, 150);
> + return 0;
> +}
> +
> +static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx)
> +{
> + unsigned int status, ctl;
> + u8 value;
> +
> + if (!i2c_imx->slave) {
> + dev_err(&i2c_imx->adapter.dev, "cannot deal with slave irq,i2c_imx->slave is null");
> + return IRQ_NONE;
> + }
This function is never called with !i2c_imx->slave.
> +
> + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + if (status & I2SR_IAL) { /* Arbitration lost */
> + i2c_imx_clr_al_bit(status, i2c_imx);
> + } else if (status & I2SR_IAAS) { /* Addressed as a slave */
> + if (status & I2SR_SRW) { /* Master wants to read from us*/
> + dev_dbg(&i2c_imx->adapter.dev, "read requested");
> + i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_REQUESTED, &value);
> +
> + /* Slave transmit */
> + ctl |= I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> +
> + /* Send data */
> + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> + } else { /* Master wants to write to us */
> + dev_dbg(&i2c_imx->adapter.dev, "write requested");
> + i2c_slave_event(i2c_imx->slave, I2C_SLAVE_WRITE_REQUESTED, &value);
> +
> + /* Slave receive */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> + /* Dummy read */
> + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + }
> + } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
> + if (status & I2SR_IBB) { /* No STOP signal detected */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> +
> + value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + i2c_slave_event(i2c_imx->slave, I2C_SLAVE_WRITE_RECEIVED, &value);
> + } else { /* STOP signal is detected */
> + dev_dbg(&i2c_imx->adapter.dev,
> + "STOP signal detected");
> + i2c_slave_event(i2c_imx->slave, I2C_SLAVE_STOP, &value);
> + }
> + } else if (!(status & I2SR_RXAK)) { /* Transmit mode received ACK */
> + ctl |= I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> +
> + i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_PROCESSED, &value);
> +
> + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> + } else { /* Transmit mode received NAK */
> + ctl &= ~I2CR_MTX;
> + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + }
> + return IRQ_HANDLED;
> +}
> +
> +static int i2c_imx_reg_slave(struct i2c_client *client)
> +{
> + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> + int ret;
> + if (i2c_imx->slave)
> + return -EBUSY;
> +
> + i2c_imx->slave = client;
> +
> + ret = i2c_imx_slave_init(i2c_imx);
> + if (ret < 0)
> + dev_err(&i2c_imx->adapter.dev, "failed to switch to slave mode");
The caller already reports an error. No need to do it here again.
> +
> + return ret;
> +}
> +
> +static int i2c_imx_unreg_slave(struct i2c_client *client)
> +{
> + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> + int ret;
> +
> + if (!i2c_imx->slave)
> + return -EINVAL;
> +
> + /* Reset slave address. */
> + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> +
> + i2c_imx_reset_regs(i2c_imx);
> +
> + i2c_imx->slave = NULL;
> +
> + /* Suspend */
> + ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
> + if (ret < 0)
> + dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c controller");
I doubt this message is useful.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
> Subject: [EXT] Re: [v5] i2c: imx: support slave mode for imx I2C driver
>
> Caution: EXT Email
>
> Hi,
>
> Some more comments inline.
>
> On Fri, Nov 29, 2019 at 05:05:13PM +0800, Biwen Li wrote:
> > The patch supports slave mode for imx I2C driver
> >
> > Signed-off-by: Biwen Li <[email protected]>
> > ---
> > Change in v5:
> > - fix a bug that cannot determine in what mode(master mode or
> > slave mode)
> >
> > Change in v4:
> > - add MACRO CONFIG_I2C_SLAVE to fix compilation issue
> >
> > Change in v3:
> > - support layerscape and i.mx platform
> >
> > Change in v2:
> > - remove MACRO CONFIG_I2C_SLAVE
> >
> >
> > drivers/i2c/busses/i2c-imx.c | 216
> > ++++++++++++++++++++++++++++++++---
> > 1 file changed, 198 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index a3b61336fe55..52f70de16900 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -203,6 +203,9 @@ struct imx_i2c_struct {
> > struct pinctrl_state *pinctrl_pins_gpio;
> >
> > struct imx_i2c_dma *dma;
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > + struct i2c_client *slave;
> > +#endif
> > };
> >
> > static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -279,6
> > +282,14 @@ static inline unsigned char imx_i2c_read_reg(struct
> imx_i2c_struct *i2c_imx,
> > return readb(i2c_imx->base + (reg <<
> > i2c_imx->hwdata->regshift)); }
> >
> > +/* Set up i2c controller register and i2c status register to default
> > +value. */ static void i2c_imx_reset_regs(struct imx_i2c_struct
> > +*i2c_imx) {
> > + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
> > + i2c_imx, IMX_I2C_I2CR);
> > + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx,
> > +IMX_I2C_I2SR); }
> > +
> > /* Functions for DMA support */
> > static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> > dma_addr_t phy_addr)
> @@
> > -588,23 +599,33 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
> > imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); }
> >
> > -static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> > +/* Clear interrupt flag bit */
> > +static void i2c_imx_clr_if_bit(unsigned int status, struct
> > +imx_i2c_struct *i2c_imx)
> > {
> > - struct imx_i2c_struct *i2c_imx = dev_id;
> > - unsigned int temp;
> > + status &= ~I2SR_IIF;
> > + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> > + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
> >
> > - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > - if (temp & I2SR_IIF) {
> > - /* save status register */
> > - i2c_imx->i2csr = temp;
> > - temp &= ~I2SR_IIF;
> > - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
> > - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
> > - wake_up(&i2c_imx->queue);
> > - return IRQ_HANDLED;
> > - }
> > +/* Clear arbitration lost bit */
> > +static void i2c_imx_clr_al_bit(unsigned int status, struct
> > +imx_i2c_struct *i2c_imx) {
>
> Can you please remove some of the really obvious comments? When a function
> is named clr_al_bit, then it doesn't need a comment which says that this
> function really does this. There are more comments like this in the patch.
Got it, I will remove it in v6.
>
> > + status &= ~I2SR_IAL;
> > + status |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
> > + imx_i2c_write_reg(status, i2c_imx, IMX_I2C_I2SR); }
> >
> > - return IRQ_NONE;
> > +static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx)
> > +{
> > + unsigned int status;
> > +
> > + /* Save status register */
> > + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > + i2c_imx->i2csr = status | I2SR_IIF;
>
> Instead of reading the status register again you could set i2c_imx->i2csr in the
> caller.
>
> > +
> > + wake_up(&i2c_imx->queue);
> > +
> > + return IRQ_HANDLED;
> > }
> >
> > static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, @@
> > -900,6 +921,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
> >
> > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
> >
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > + if (i2c_imx->slave) {
> > + dev_err(&i2c_imx->adapter.dev, "Please not do operations of
> master mode in slave mode");
> > + return -EBUSY;
> > + }
> > +#endif
> > +
> > result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > if (result < 0)
> > goto out;
> > @@ -1048,11 +1076,166 @@ static u32 i2c_imx_func(struct i2c_adapter
> *adapter)
> > | I2C_FUNC_SMBUS_READ_BLOCK_DATA; }
> >
> > +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > +static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx) {
> > + int temp;
> > +
> > + /* Resume */
> > + temp = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > + if (temp < 0) {
> > + dev_err(&i2c_imx->adapter.dev, "failed to resume i2c
> controller");
> > + return temp;
> > + }
> > +
> > + /* Set slave addr. */
> > + imx_i2c_write_reg((i2c_imx->slave->addr << 1), i2c_imx,
> > + IMX_I2C_IADR);
> > +
> > + i2c_imx_reset_regs(i2c_imx);
> > +
> > + /* Enable module */
> > + temp = i2c_imx->hwdata->i2cr_ien_opcode;
> > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> > +
> > + /* Enable interrupt from i2c module */
> > + temp |= I2CR_IIEN;
> > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>
> Do these have to be two register accesses?
Yes, unless it will be not workable of interrupt.
>
> > +
> > + /* Wait controller to be stable */
> > + usleep_range(50, 150);
> > + return 0;
> > +}
> > +
> > +static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx)
> > +{
> > + unsigned int status, ctl;
> > + u8 value;
> > +
> > + if (!i2c_imx->slave) {
> > + dev_err(&i2c_imx->adapter.dev, "cannot deal with slave
> irq,i2c_imx->slave is null");
> > + return IRQ_NONE;
> > + }
>
> This function is never called with !i2c_imx->slave.
Got it, I will remove it in v6.
>
> > +
> > + status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> > + ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> > + if (status & I2SR_IAL) { /* Arbitration lost */
> > + i2c_imx_clr_al_bit(status, i2c_imx);
> > + } else if (status & I2SR_IAAS) { /* Addressed as a slave */
> > + if (status & I2SR_SRW) { /* Master wants to read from us*/
> > + dev_dbg(&i2c_imx->adapter.dev, "read requested");
> > + i2c_slave_event(i2c_imx->slave,
> > + I2C_SLAVE_READ_REQUESTED, &value);
> > +
> > + /* Slave transmit */
> > + ctl |= I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > +
> > + /* Send data */
> > + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> > + } else { /* Master wants to write to us */
> > + dev_dbg(&i2c_imx->adapter.dev, "write
> requested");
> > + i2c_slave_event(i2c_imx->slave,
> > + I2C_SLAVE_WRITE_REQUESTED, &value);
> > +
> > + /* Slave receive */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > + /* Dummy read */
> > + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> > + }
> > + } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
> > + if (status & I2SR_IBB) { /* No STOP signal detected
> */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx,
> > + IMX_I2C_I2CR);
> > +
> > + value = imx_i2c_read_reg(i2c_imx,
> IMX_I2C_I2DR);
> > + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_WRITE_RECEIVED, &value);
> > + } else { /* STOP signal is detected */
> > + dev_dbg(&i2c_imx->adapter.dev,
> > + "STOP signal detected");
> > + i2c_slave_event(i2c_imx->slave,
> I2C_SLAVE_STOP, &value);
> > + }
> > + } else if (!(status & I2SR_RXAK)) { /* Transmit mode received ACK
> */
> > + ctl |= I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > +
> > + i2c_slave_event(i2c_imx->slave,
> > + I2C_SLAVE_READ_PROCESSED, &value);
> > +
> > + imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
> > + } else { /* Transmit mode received NAK */
> > + ctl &= ~I2CR_MTX;
> > + imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
> > + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> > + }
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int i2c_imx_reg_slave(struct i2c_client *client) {
> > + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > + int ret;
> > + if (i2c_imx->slave)
> > + return -EBUSY;
> > +
> > + i2c_imx->slave = client;
> > +
> > + ret = i2c_imx_slave_init(i2c_imx);
> > + if (ret < 0)
> > + dev_err(&i2c_imx->adapter.dev, "failed to switch to
> > + slave mode");
>
> The caller already reports an error. No need to do it here again.
Okay, got it, I will remove it in v6.
>
> > +
> > + return ret;
> > +}
> > +
> > +static int i2c_imx_unreg_slave(struct i2c_client *client) {
> > + struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > + int ret;
> > +
> > + if (!i2c_imx->slave)
> > + return -EINVAL;
> > +
> > + /* Reset slave address. */
> > + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> > +
> > + i2c_imx_reset_regs(i2c_imx);
> > +
> > + i2c_imx->slave = NULL;
> > +
> > + /* Suspend */
> > + ret = pm_runtime_put_sync(i2c_imx->adapter.dev.parent);
> > + if (ret < 0)
> > + dev_err(&i2c_imx->adapter.dev, "failed to suspend i2c
> > + controller");
>
> I doubt this message is useful.
Got it, I will remove it in v6.
>
> Sascha
>
> --
> Pengutronix e.K. |
> |
> Steuerwalder Str. 21 |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe
> ngutronix.de%2F&data=02%7C01%7Cbiwen.li%40nxp.com%7C8f076a1a
> 982f408bd62808d7770dbb1f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C637108773168503613&sdata=tzCXguqtJVjaAisPkUzsqwI1frtL
> 3ToGNpmyJGnLA3s%3D&reserved=0 |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |