This is the start of the stable review cycle for the 4.9.329 release.
There are 7 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 18 Sep 2022 10:04:31 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.329-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.329-rc1
Brian Norris <[email protected]>
tracefs: Only clobber mode/uid/gid on remount if asked
Jann Horn <[email protected]>
mm: Fix TLB flush for not-first PFNMAP mappings in unmap_region()
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes
Li Qiong <[email protected]>
ieee802154: cc2520: add rc code in cc2520_tx()
Kai-Heng Feng <[email protected]>
tg3: Disable tg3 device on system reboot to avoid triggering AER
Jason Wang <[email protected]>
HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo
Rob Clark <[email protected]>
drm/msm/rd: Fix FIFO-full deadlock
-------------
Diffstat:
Makefile | 4 ++--
drivers/gpu/drm/msm/msm_rd.c | 3 +++
drivers/hid/intel-ish-hid/ishtp-hid.h | 2 +-
drivers/net/ethernet/broadcom/tg3.c | 8 ++++++--
drivers/net/ieee802154/cc2520.c | 1 +
drivers/platform/x86/acer-wmi.c | 9 ++++++++-
fs/tracefs/inode.c | 31 +++++++++++++++++++++++--------
mm/mmap.c | 9 +++++++--
8 files changed, 51 insertions(+), 16 deletions(-)
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 2ca1c94ce0b65a2ce7512b718f3d8a0fe6224bca ]
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a
reboot hang on one Dell servers so the commit was reverted.
Someone managed to collect the AER log and it's caused by MSI:
[ 148.762067] ACPI: Preparing to enter system sleep state S5
[ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5
[ 148.803731] {1}[Hardware Error]: event severity: recoverable
[ 148.810191] {1}[Hardware Error]: Error 0, type: fatal
[ 148.816088] {1}[Hardware Error]: section_type: PCIe error
[ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point
[ 148.829026] {1}[Hardware Error]: version: 3.0
[ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010
[ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0
[ 148.847309] {1}[Hardware Error]: slot: 0
[ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00
[ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f
[ 148.865145] {1}[Hardware Error]: class_code: 020000
[ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000
[ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030
[ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000
[ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000
[ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First)
[ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID
[ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030
[ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000
The MSI is probably raised by incoming packets, so power down the device
and disable bus mastering to stop the traffic, as user confirmed this
approach works.
In addition to that, be extra safe and cancel reset task if it's running.
Cc: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/
BugLink: https://bugs.launchpad.net/bugs/1917471
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/tg3.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 2db6102ed5848..96424b7781d29 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -18152,16 +18152,20 @@ static void tg3_shutdown(struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct tg3 *tp = netdev_priv(dev);
+ tg3_reset_task_cancel(tp);
+
rtnl_lock();
+
netif_device_detach(dev);
if (netif_running(dev))
dev_close(dev);
- if (system_state == SYSTEM_POWER_OFF)
- tg3_power_down(tp);
+ tg3_power_down(tp);
rtnl_unlock();
+
+ pci_disable_device(pdev);
}
/**
--
2.35.1
From: Jason Wang <[email protected]>
[ Upstream commit 94553f8a218540d676efbf3f7827ed493d1057cf ]
The double `like' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/intel-ish-hid/ishtp-hid.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ishtp-hid.h b/drivers/hid/intel-ish-hid/ishtp-hid.h
index f5c7eb79b7b53..fa16983007f60 100644
--- a/drivers/hid/intel-ish-hid/ishtp-hid.h
+++ b/drivers/hid/intel-ish-hid/ishtp-hid.h
@@ -118,7 +118,7 @@ struct report_list {
* @multi_packet_cnt: Count of fragmented packet count
*
* This structure is used to store completion flags and per client data like
- * like report description, number of HID devices etc.
+ * report description, number of HID devices etc.
*/
struct ishtp_cl_data {
/* completion flags */
--
2.35.1
From: Hans de Goede <[email protected]>
[ Upstream commit c3b82d26bc85f5fc2fef5ec8cce17c89633a55a8 ]
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ec3cbb7844bce..c10b97c91f3cc 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -105,6 +105,7 @@ static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */
{KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */
{KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */
+ {KE_KEY, 0x27, {KEY_HELP} },
{KE_KEY, 0x29, {KEY_PROG3} }, /* P_Key for TM8372 */
{KE_IGNORE, 0x41, {KEY_MUTE} },
{KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} },
@@ -118,7 +119,13 @@ static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_IGNORE, 0x48, {KEY_VOLUMEUP} },
{KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} },
{KE_IGNORE, 0x4a, {KEY_VOLUMEDOWN} },
- {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} },
+ /*
+ * 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate input event
+ * with the "Video Bus" input device events. But sometimes it is not
+ * a dup. Map it to KEY_UNKNOWN instead of using KE_IGNORE so that
+ * udev/hwdb can override it on systems where it is not a dup.
+ */
+ {KE_KEY, 0x61, {KEY_UNKNOWN} },
{KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} },
{KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} },
{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */
--
2.35.1
From: Li Qiong <[email protected]>
[ Upstream commit ffd7bdddaab193c38416fd5dd416d065517d266e ]
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW".
Assign rc code with '-EINVAL' at this error path to fix it.
Signed-off-by: Li Qiong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/cc2520.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index d50add705a79a..436cf2007138a 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -512,6 +512,7 @@ cc2520_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
goto err_tx;
if (status & CC2520_STATUS_TX_UNDERFLOW) {
+ rc = -EINVAL;
dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
goto err_tx;
}
--
2.35.1
From: Rob Clark <[email protected]>
[ Upstream commit 174974d8463b77c2b4065e98513adb204e64de7d ]
If the previous thing cat'ing $debugfs/rd left the FIFO full, then
subsequent open could deadlock in rd_write() (because open is blocked,
not giving a chance for read() to consume any data in the FIFO). Also
it is generally a good idea to clear out old data from the FIFO.
Signed-off-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/496706/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_rd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 4823019eb422b..a8a04d8c5ca62 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -188,6 +188,9 @@ static int rd_open(struct inode *inode, struct file *file)
file->private_data = rd;
rd->open = true;
+ /* Reset fifo to clear any previously unread data: */
+ rd->fifo.head = rd->fifo.tail = 0;
+
/* the parsing tools need to know gpu-id to know which
* register database to load.
*/
--
2.35.1
From: Jann Horn <[email protected]>
This is a stable-specific patch.
I botched the stable-specific rewrite of
commit b67fbebd4cf98 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas"):
As Hugh pointed out, unmap_region() actually operates on a list of VMAs,
and the variable "vma" merely points to the first VMA in that list.
So if we want to check whether any of the VMAs we're operating on is
PFNMAP or MIXEDMAP, we have to iterate through the list and check each VMA.
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mmap.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2524,6 +2524,7 @@ static void unmap_region(struct mm_struc
{
struct vm_area_struct *next = prev ? prev->vm_next : mm->mmap;
struct mmu_gather tlb;
+ struct vm_area_struct *cur_vma;
lru_add_drain();
tlb_gather_mmu(&tlb, mm, start, end);
@@ -2538,8 +2539,12 @@ static void unmap_region(struct mm_struc
* concurrent flush in this region has to be coming through the rmap,
* and we synchronize against that using the rmap lock.
*/
- if ((vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0)
- tlb_flush_mmu(&tlb);
+ for (cur_vma = vma; cur_vma; cur_vma = cur_vma->vm_next) {
+ if ((cur_vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0) {
+ tlb_flush_mmu(&tlb);
+ break;
+ }
+ }
free_pgtables(&tlb, vma, prev ? prev->vm_end : FIRST_USER_ADDRESS,
next ? next->vm_start : USER_PGTABLES_CEILING);
From: Brian Norris <[email protected]>
commit 47311db8e8f33011d90dee76b39c8886120cdda4 upstream.
Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.
Only clobber if the options were provided at mount time.
Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.
Existing behavior:
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwx------
## Unexpected: the automount changed mode for other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwx------
New behavior (after this change):
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwxr-xr-x
## Expected: the automount does not change other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid
Cc: [email protected]
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/tracefs/inode.c | 31 +++++++++++++++++++++++--------
1 file changed, 23 insertions(+), 8 deletions(-)
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -142,6 +142,8 @@ struct tracefs_mount_opts {
kuid_t uid;
kgid_t gid;
umode_t mode;
+ /* Opt_* bitfield. */
+ unsigned int opts;
};
enum {
@@ -242,6 +244,7 @@ static int tracefs_parse_options(char *d
kgid_t gid;
char *p;
+ opts->opts = 0;
opts->mode = TRACEFS_DEFAULT_MODE;
while ((p = strsep(&data, ",")) != NULL) {
@@ -276,24 +279,36 @@ static int tracefs_parse_options(char *d
* but traditionally tracefs has ignored all mount options
*/
}
+
+ opts->opts |= BIT(token);
}
return 0;
}
-static int tracefs_apply_options(struct super_block *sb)
+static int tracefs_apply_options(struct super_block *sb, bool remount)
{
struct tracefs_fs_info *fsi = sb->s_fs_info;
struct inode *inode = sb->s_root->d_inode;
struct tracefs_mount_opts *opts = &fsi->mount_opts;
- inode->i_mode &= ~S_IALLUGO;
- inode->i_mode |= opts->mode;
+ /*
+ * On remount, only reset mode/uid/gid if they were provided as mount
+ * options.
+ */
+
+ if (!remount || opts->opts & BIT(Opt_mode)) {
+ inode->i_mode &= ~S_IALLUGO;
+ inode->i_mode |= opts->mode;
+ }
- inode->i_uid = opts->uid;
+ if (!remount || opts->opts & BIT(Opt_uid))
+ inode->i_uid = opts->uid;
- /* Set all the group ids to the mount option */
- set_gid(sb->s_root, opts->gid);
+ if (!remount || opts->opts & BIT(Opt_gid)) {
+ /* Set all the group ids to the mount option */
+ set_gid(sb->s_root, opts->gid);
+ }
return 0;
}
@@ -308,7 +323,7 @@ static int tracefs_remount(struct super_
if (err)
goto fail;
- tracefs_apply_options(sb);
+ tracefs_apply_options(sb, true);
fail:
return err;
@@ -362,7 +377,7 @@ static int trace_fill_super(struct super
sb->s_op = &tracefs_super_operations;
- tracefs_apply_options(sb);
+ tracefs_apply_options(sb, false);
return 0;
Hi!
> This is the start of the stable review cycle for the 4.9.329 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Fri, Sep 16, 2022 at 12:07:43PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.329 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 18 Sep 2022 10:04:31 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 164 pass: 164 fail: 0
Qemu test results:
total: 395 pass: 395 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 9/16/2022 3:07 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.329 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 18 Sep 2022 10:04:31 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.329-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Fri, 16 Sept 2022 at 15:37, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.329 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 18 Sep 2022 10:04:31 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.329-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.9.329-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: baa4a2e9ad839b9028f4de5fb09bcc2d2f24f2ed
* git describe: v4.9.328-8-gbaa4a2e9ad83
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.328-8-gbaa4a2e9ad83
## No test Regressions (compared to v4.9.328)
## No metric Regressions (compared to v4.9.328)
## No test Fixes (compared to v4.9.328)
## No metric Fixes (compared to v4.9.328)
## Test result summary
total: 77802, pass: 67229, fail: 701, skip: 9432, xfail: 440
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 282 total, 277 passed, 5 failed
* arm64: 53 total, 46 passed, 7 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 41 total, 40 passed, 1 failed
* parisc: 12 total, 0 passed, 12 failed
* powerpc: 45 total, 19 passed, 26 failed
* s390: 15 total, 11 passed, 4 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 48 total, 47 passed, 1 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org