This is the start of the stable review cycle for the 5.4.153 release.
There are 52 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.153-rc2
Lukas Bulwahn <[email protected]>
x86/Kconfig: Correct reference to MWINCHIP3D
Thomas Gleixner <[email protected]>
x86/hpet: Use another crystalball to evaluate HPET usability
Lukas Bulwahn <[email protected]>
x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
Naveen N. Rao <[email protected]>
powerpc/bpf: Fix BPF_MOD when imm == 1
Palmer Dabbelt <[email protected]>
RISC-V: Include clone3() on rv32
Tiezhu Yang <[email protected]>
bpf, s390: Fix potential memory leak about jit_data
Jamie Iles <[email protected]>
i2c: acpi: fix resource leak in reconfiguration device addition
Mike Manning <[email protected]>
net: prefer socket bound to interface when not in VRF
Sylwester Dziedziuch <[email protected]>
i40e: Fix freeing of uninitialized misc IRQ vector
Jiri Benc <[email protected]>
i40e: fix endless loop under rtnl
Eric Dumazet <[email protected]>
gve: fix gve_get_stats()
Eric Dumazet <[email protected]>
rtnetlink: fix if_nlmsg_stats_size() under estimation
Catherine Sullivan <[email protected]>
gve: Correct available tx qpl check
Yang Yingliang <[email protected]>
drm/nouveau/debugfs: fix file release memory leak
Mark Brown <[email protected]>
video: fbdev: gbefb: Only instantiate device when built for IP32
Tony Lindgren <[email protected]>
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
Eric Dumazet <[email protected]>
netlink: annotate data races around nlk->bound
Sean Anderson <[email protected]>
net: sfp: Fix typo in state machine debug string
Eric Dumazet <[email protected]>
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
Eric Dumazet <[email protected]>
net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()
Oleksij Rempel <[email protected]>
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
Michael Walle <[email protected]>
arm64: dts: ls1028a: add missing CAN nodes
Andre Przywara <[email protected]>
arm64: dts: freescale: Fix SP805 clock-names
Andy Shevchenko <[email protected]>
ptp_pch: Load module automatically if ID matches
Pali Rohár <[email protected]>
powerpc/fsl/dts: Fix phy-connection-type for fm1mac3
Eric Dumazet <[email protected]>
net_sched: fix NULL deref in fifo_set_limit()
Pavel Skripkin <[email protected]>
phy: mdio: fix memory leak
Tatsuhiko Yasumatsu <[email protected]>
bpf: Fix integer overflow in prealloc_elems_and_freelist()
Johan Almbladh <[email protected]>
bpf, arm: Fix register clobbering in div/mod implementation
Max Filippov <[email protected]>
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
Randy Dunlap <[email protected]>
xtensa: use CONFIG_USE_OF instead of CONFIG_OF
Max Filippov <[email protected]>
xtensa: move XCHAL_KIO_* definitions to kmem_layout.h
Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
Marek Vasut <[email protected]>
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
Marek Vasut <[email protected]>
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Shawn Guo <[email protected]>
soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
Marijn Suijten <[email protected]>
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
Antonio Martorana <[email protected]>
soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Piotr Krysiuk <[email protected]>
bpf, mips: Validate conditional branch offsets
Paul Burton <[email protected]>
MIPS: BPF: Restore MIPS32 cBPF JIT
David Heidelberg <[email protected]>
ARM: dts: qcom: apq8064: use compatible which contains chipid
Roger Quadros <[email protected]>
ARM: dts: omap3430-sdp: Fix NAND device node
Juergen Gross <[email protected]>
xen/balloon: fix cancelled balloon action
Trond Myklebust <[email protected]>
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
Patrick Ho <[email protected]>
nfsd: fix error handling of register_pernet_subsys() in init_nfsd()
Zheng Liang <[email protected]>
ovl: fix missing negative dentry check in ovl_rename()
Neil Armstrong <[email protected]>
mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
Jan Beulich <[email protected]>
xen/privcmd: fix error handling in mmap-resource processing
Xu Yang <[email protected]>
usb: typec: tcpm: handle SRC_STARTUP state if cc changes
Johan Hovold <[email protected]>
USB: cdc-acm: fix break reporting
Johan Hovold <[email protected]>
USB: cdc-acm: fix racy tty buffer accesses
Ben Hutchings <[email protected]>
Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/imx53-m53menlo.dts | 4 +-
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +-
arch/arm/mach-imx/pm-imx6.c | 2 +
arch/arm/mach-omap2/omap_hwmod.c | 2 +
arch/arm/net/bpf_jit_32.c | 19 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 22 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 +-
arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +-
arch/mips/Kconfig | 1 +
arch/mips/net/Makefile | 1 +
arch/mips/net/bpf_jit.c | 1299 ++++++++++++++++++++++++
arch/mips/net/bpf_jit_asm.S | 285 ++++++
arch/powerpc/boot/dts/fsl/t1023rdb.dts | 2 +-
arch/powerpc/net/bpf_jit_comp64.c | 10 +-
arch/riscv/include/uapi/asm/unistd.h | 3 +-
arch/s390/net/bpf_jit_comp.c | 2 +-
arch/x86/Kconfig | 2 +-
arch/x86/kernel/early-quirks.c | 6 -
arch/x86/kernel/hpet.c | 81 ++
arch/x86/platform/olpc/olpc.c | 2 +-
arch/xtensa/include/asm/kmem_layout.h | 29 +
arch/xtensa/include/asm/vectors.h | 42 +-
arch/xtensa/kernel/irq.c | 2 +-
arch/xtensa/kernel/setup.c | 12 +-
arch/xtensa/mm/mmu.c | 2 +-
drivers/bus/ti-sysc.c | 3 +
drivers/gpu/drm/nouveau/nouveau_debugfs.c | 1 +
drivers/i2c/i2c-core-acpi.c | 1 +
drivers/mmc/host/meson-gx-mmc.c | 73 +-
drivers/net/ethernet/google/gve/gve.h | 2 +-
drivers/net/ethernet/google/gve/gve_main.c | 13 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +-
drivers/net/phy/mdio_bus.c | 7 +
drivers/net/phy/sfp.c | 2 +-
drivers/ptp/ptp_pch.c | 1 +
drivers/soc/qcom/mdt_loader.c | 2 +-
drivers/soc/qcom/socinfo.c | 2 +-
drivers/usb/class/cdc-acm.c | 8 +
drivers/usb/common/Kconfig | 3 +-
drivers/usb/typec/tcpm/tcpm.c | 1 +
drivers/video/fbdev/gbefb.c | 2 +-
drivers/xen/balloon.c | 21 +-
drivers/xen/privcmd.c | 7 +-
fs/nfsd/nfs4xdr.c | 19 +-
fs/nfsd/nfsctl.c | 2 +-
fs/overlayfs/dir.c | 10 +-
kernel/bpf/stackmap.c | 3 +-
net/bridge/br_netlink.c | 2 +-
net/core/rtnetlink.c | 2 +-
net/ipv4/inet_hashtables.c | 4 +-
net/ipv4/udp.c | 3 +-
net/ipv6/inet6_hashtables.c | 2 +-
net/ipv6/udp.c | 3 +-
net/netlink/af_netlink.c | 14 +-
net/sched/sch_fifo.c | 3 +
net/sched/sch_taprio.c | 4 +
59 files changed, 1955 insertions(+), 147 deletions(-)
On Tue, 12 Oct 2021 at 12:16, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.153 release.
> There are 52 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
stable rc 5.4.153-rc2 Powerpc build failed.
In file included from arch/powerpc/net/bpf_jit64.h:11,
from arch/powerpc/net/bpf_jit_comp64.c:19:
arch/powerpc/net/bpf_jit_comp64.c: In function 'bpf_jit_build_body':
arch/powerpc/net/bpf_jit.h:32:9: error: expected expression before 'do'
32 | do { if (d) { (d)[idx] = instr; } idx++; } while (0)
| ^~
arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR'
33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
| ^~~~~~~~~~~
arch/powerpc/net/bpf_jit_comp64.c:415:41: note: in expansion of macro 'EMIT'
415 | EMIT(PPC_LI(dst_reg, 0));
| ^~~~
arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR'
33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
| ^~~~~~~~~~~
arch/powerpc/net/bpf_jit.h:41:33: note: in expansion of macro 'EMIT'
41 | #define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI |
___PPC_RT(d) | \
| ^~~~
arch/powerpc/net/bpf_jit.h:44:33: note: in expansion of macro 'PPC_ADDI'
44 | #define PPC_LI(r, i) PPC_ADDI(r, 0, i)
| ^~~~~~~~
arch/powerpc/net/bpf_jit_comp64.c:415:46: note: in expansion of macro 'PPC_LI'
415 | EMIT(PPC_LI(dst_reg, 0));
| ^~~~~~
make[3]: *** [scripts/Makefile.build:262:
arch/powerpc/net/bpf_jit_comp64.o] Error 1
make[3]: Target '__build' not remade because of errors.
Reported-by: Linux Kernel Functional Testing <[email protected]>
--
Linaro LKFT
https://lkft.linaro.org
On Tue, Oct 12, 2021 at 01:04:54PM +0530, Naresh Kamboju wrote:
> On Tue, 12 Oct 2021 at 12:16, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.153 release.
> > There are 52 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 14 Oct 2021 06:44:25 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.153-rc2.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> stable rc 5.4.153-rc2 Powerpc build failed.
>
> In file included from arch/powerpc/net/bpf_jit64.h:11,
> from arch/powerpc/net/bpf_jit_comp64.c:19:
> arch/powerpc/net/bpf_jit_comp64.c: In function 'bpf_jit_build_body':
> arch/powerpc/net/bpf_jit.h:32:9: error: expected expression before 'do'
> 32 | do { if (d) { (d)[idx] = instr; } idx++; } while (0)
> | ^~
> arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR'
> 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
> | ^~~~~~~~~~~
> arch/powerpc/net/bpf_jit_comp64.c:415:41: note: in expansion of macro 'EMIT'
> 415 | EMIT(PPC_LI(dst_reg, 0));
> | ^~~~
> arch/powerpc/net/bpf_jit.h:33:33: note: in expansion of macro 'PLANT_INSTR'
> 33 | #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
> | ^~~~~~~~~~~
> arch/powerpc/net/bpf_jit.h:41:33: note: in expansion of macro 'EMIT'
> 41 | #define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI |
> ___PPC_RT(d) | \
> | ^~~~
> arch/powerpc/net/bpf_jit.h:44:33: note: in expansion of macro 'PPC_ADDI'
> 44 | #define PPC_LI(r, i) PPC_ADDI(r, 0, i)
> | ^~~~~~~~
> arch/powerpc/net/bpf_jit_comp64.c:415:46: note: in expansion of macro 'PPC_LI'
> 415 | EMIT(PPC_LI(dst_reg, 0));
> | ^~~~~~
> make[3]: *** [scripts/Makefile.build:262:
> arch/powerpc/net/bpf_jit_comp64.o] Error 1
> make[3]: Target '__build' not remade because of errors.
>
> Reported-by: Linux Kernel Functional Testing <[email protected]>
Ok, I'm just going to go delete this patch from the queue now...
Thanks for the quick report.
greg k-h