This is the start of the stable review cycle for the 4.4.269 release.
There are 190 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 22 May 2021 09:20:38 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.269-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.269-rc1
Colin Ian King <[email protected]>
iio: tsl2583: Fix division by a zero lux_val
Christophe JAILLET <[email protected]>
xhci: Do not use GFP_KERNEL in (potentially) atomic context
Eric Dumazet <[email protected]>
ipv6: remove extra dev_hold() for fallback tunnels
Eric Dumazet <[email protected]>
ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
Eric Dumazet <[email protected]>
sit: proper dev_{hold|put} in ndo_[un]init methods
Hui Wang <[email protected]>
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
Johannes Berg <[email protected]>
um: Mark all kernel symbols as local
Feilong Lin <[email protected]>
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
Ard Biesheuvel <[email protected]>
ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6
Arnd Bergmann <[email protected]>
isdn: capi: fix mismatched prototypes
Kaixu Xia <[email protected]>
cxgb4: Fix the -Wmisleading-indentation warning
Arnd Bergmann <[email protected]>
usb: sl811-hcd: improve misleading indentation
Arnd Bergmann <[email protected]>
kgdb: fix gcc-11 warning on indentation
Arnd Bergmann <[email protected]>
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
Greg Kroah-Hartman <[email protected]>
kobject_uevent: remove warning in init_uevent_argv()
Mikulas Patocka <[email protected]>
dm ioctl: fix out of bounds array access when no devices
Lukasz Luba <[email protected]>
thermal/core/fair share: Lock the thermal zone while looping over instances
Maciej W. Rozycki <[email protected]>
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
Maciej W. Rozycki <[email protected]>
MIPS: Avoid DIVU in `__div64_32' is result would be zero
Maciej W. Rozycki <[email protected]>
MIPS: Reinstate platform `__div64_32' handler
Maciej W. Rozycki <[email protected]>
FDDI: defxx: Make MMIO the configuration default except for EISA
Thomas Gleixner <[email protected]>
KVM: x86: Cancel pvclock_gtod_work on module removal
Chunfeng Yun <[email protected]>
usb: core: hub: fix race condition about TRSMRCY of resume
Phil Elwell <[email protected]>
usb: dwc2: Fix gadget DMA unmap direction
Maximilian Luz <[email protected]>
usb: xhci: Increase timeout for HC halt
Christophe JAILLET <[email protected]>
usb: fotg210-hcd: Fix an error message
Phillip Lougher <[email protected]>
squashfs: fix divide error in calculate_skip()
Michael Ellerman <[email protected]>
powerpc/64s: Fix crashes when toggling entry flush barrier
Vineet Gupta <[email protected]>
ARC: entry: fix off-by-one error in syscall number validation
Jia-Ju Bai <[email protected]>
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
Miaohe Lin <[email protected]>
ksm: fix potential missing rmap_item for stable_node
Kees Cook <[email protected]>
drm/radeon: Fix off-by-one power_state index heap overwrite
Xin Long <[email protected]>
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
Olga Kornievskaia <[email protected]>
NFSv4.2 fix handling of sr_eof in SEEK's reply
Nikola Livic <[email protected]>
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
Trond Myklebust <[email protected]>
NFS: Deal correctly with attribute generation counter overflow
Dmitry Baryshkov <[email protected]>
PCI: Release OF node in pci_scan_device()'s error path
David Ward <[email protected]>
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
Alexey Kardashevskiy <[email protected]>
powerpc/iommu: Annotate nested lock for lockdep
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
David Ward <[email protected]>
ASoC: rt286: Generalize support for ALC3263 codec
Gustavo A. R. Silva <[email protected]>
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
Mihai Moldovan <[email protected]>
kconfig: nconf: stop endless search loops
Yonghong Song <[email protected]>
selftests: Set CC to clang in lib.mk if LLVM is set
Miklos Szeredi <[email protected]>
cuse: prevent clone
Emmanuel Grumbach <[email protected]>
mac80211: clear the beacon's CRC after channel switch
Eric Dumazet <[email protected]>
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
Tetsuo Handa <[email protected]>
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
Archie Pusaka <[email protected]>
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Tong Zhang <[email protected]>
ALSA: rme9652: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdspm: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdsp: don't disable if not enabled
Jonathan McDowell <[email protected]>
net: stmmac: Set FIFO sizes for ipq806x
Hoang Le <[email protected]>
tipc: convert dest node's address to network order
Alexander Aring <[email protected]>
fs: dlm: fix debugfs dump
Xin Long <[email protected]>
sctp: delay auto_asconf init until binding the first addr
Xin Long <[email protected]>
Revert "net/sctp: fix race condition in sctp_destroy_sock"
Dan Carpenter <[email protected]>
kfifo: fix ternary sign extension bugs
Lv Yunlong <[email protected]>
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
Christophe Leroy <[email protected]>
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
Toke Høiland-Jørgensen <[email protected]>
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
Colin Ian King <[email protected]>
net: davinci_emac: Fix incorrect masking of tx and rx error channel
Stefano Garzarella <[email protected]>
vsock/vmci: log once the failed queue pair allocation
Lv Yunlong <[email protected]>
mwl8k: Fix a double Free in mwl8k_probe_hw
Sergey Shtylyov <[email protected]>
i2c: sh7760: fix IRQ error path
Tyrel Datwyler <[email protected]>
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
Sergey Shtylyov <[email protected]>
i2c: sh7760: add IRQ check
Sergey Shtylyov <[email protected]>
i2c: jz4780: add IRQ check
Sergey Shtylyov <[email protected]>
i2c: cadence: add IRQ check
Colin Ian King <[email protected]>
net: thunderx: Fix unintentional sign extension issue
Colin Ian King <[email protected]>
mt7601u: fix always true expression
Johannes Berg <[email protected]>
mac80211: bail out if cipher schemes are invalid
Randy Dunlap <[email protected]>
powerpc: iommu: fix build when neither PCI or IBMVIO is set
Takashi Iwai <[email protected]>
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
Dan Carpenter <[email protected]>
nfc: pn533: prevent potential memory corruption
Jia Zhou <[email protected]>
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
Nathan Chancellor <[email protected]>
powerpc/prom: Mark identical_pvr_fixup as __init
Xie He <[email protected]>
net: lapbether: Prevent racing when checking whether the netif is running
Maxim Mikityanskiy <[email protected]>
HID: plantronics: Workaround for double volume key presses
Nathan Chancellor <[email protected]>
x86/events/amd/iommu: Fix sysfs type mismatch
Dan Carpenter <[email protected]>
HSI: core: fix resource leaks in hsi_add_client_from_dt()
Sergey Shtylyov <[email protected]>
scsi: sni_53c710: Add IRQ check
Sergey Shtylyov <[email protected]>
scsi: sun3x_esp: Add IRQ check
Sergey Shtylyov <[email protected]>
scsi: jazz_esp: Add IRQ check
Arnd Bergmann <[email protected]>
media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch
Arnd Bergmann <[email protected]>
scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration
Sergey Shtylyov <[email protected]>
ata: libahci_platform: fix IRQ check
Sergey Shtylyov <[email protected]>
sata_mv: add IRQ checks
Sergey Shtylyov <[email protected]>
pata_ipx4xx_cf: fix IRQ check
Sergey Shtylyov <[email protected]>
pata_arasan_cf: fix IRQ check
Colin Ian King <[email protected]>
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
Yang Yingliang <[email protected]>
media: omap4iss: return error code when omap4iss_get() failed
Colin Ian King <[email protected]>
media: vivid: fix assignment of dev->fbuf_out_flags
Tetsuo Handa <[email protected]>
ttyprintk: Add TTY hangup callback.
Johan Hovold <[email protected]>
tty: fix return value for unsupported ioctls
Johan Hovold <[email protected]>
USB: cdc-acm: fix unprivileged TIOCCSERIAL
Colin Ian King <[email protected]>
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
Lv Yunlong <[email protected]>
crypto: qat - Fix a double free in adf_create_ring
Colin Ian King <[email protected]>
staging: rtl8192u: Fix potential infinite loop
Giovanni Cabiddu <[email protected]>
crypto: qat - fix error path in adf_isr_resource_alloc()
Michael Walle <[email protected]>
mtd: require write permissions for locking and badblock ioctls
Fabian Vogt <[email protected]>
fotg210-udc: Complete OUT requests on short packets
Fabian Vogt <[email protected]>
fotg210-udc: Don't DMA more than the buffer can take
Fabian Vogt <[email protected]>
fotg210-udc: Mask GRP2 interrupts we don't handle
Fabian Vogt <[email protected]>
fotg210-udc: Remove a dubious condition leading to fotg210_done
Fabian Vogt <[email protected]>
fotg210-udc: Fix EP0 IN requests bigger than two packets
Fabian Vogt <[email protected]>
fotg210-udc: Fix DMA on EP0 for length > max packet size
Tong Zhang <[email protected]>
crypto: qat - don't release uninitialized resources
Andy Shevchenko <[email protected]>
usb: gadget: pch_udc: Check for DMA mapping error
Andy Shevchenko <[email protected]>
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
Andy Shevchenko <[email protected]>
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
Colin Ian King <[email protected]>
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
Andy Shevchenko <[email protected]>
usb: gadget: pch_udc: Revert d3cb25a12138 completely
Claudio Imbrenda <[email protected]>
KVM: s390: split kvm_s390_real_to_abs
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
Colin Ian King <[email protected]>
drm/radeon: fix copy of uninitialized variable back to userspace
Johannes Berg <[email protected]>
cfg80211: scan: drop entry from hidden_list on overflow
Dan Carpenter <[email protected]>
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
Zhao Heming <[email protected]>
md: md_open returns -EBUSY when entering racing area
Christoph Hellwig <[email protected]>
md: factor out a mddev_find_locked helper from mddev_find
Steven Rostedt (VMware) <[email protected]>
tracing: Restructure trace_clock_global() to never block
Steven Rostedt (VMware) <[email protected]>
tracing: Map all PIDs to command lines
Joel Fernandes <[email protected]>
tracing: Treat recording comm for idle task as a success
Amey Telawane <[email protected]>
tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
Tetsuo Handa <[email protected]>
misc: vmw_vmci: explicitly initialize vmci_datagram payload
Tetsuo Handa <[email protected]>
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
Hans de Goede <[email protected]>
misc: lis3lv02d: Fix false-positive WARN on various HP models
Maciej W. Rozycki <[email protected]>
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
Or Cohen <[email protected]>
net/nfc: fix use-after-free llcp_sock_bind/connect
Taehee Yoo <[email protected]>
hsr: use netdev_err() instead of WARN_ONCE()
Archie Pusaka <[email protected]>
Bluetooth: verify AMP hci_chan before amp_destroy
Joe Thornber <[email protected]>
dm space map common: fix division bug in sm_ll_find_free_block()
Joe Thornber <[email protected]>
dm persistent data: packed struct should have an aligned() attribute too
Dean Anderson <[email protected]>
usb: gadget/function/f_fs string table fix for multiple languages
Anirudh Rayabharam <[email protected]>
usb: gadget: dummy_hcd: fix gpf in gadget_setup
Fengnan Chang <[email protected]>
ext4: fix error code in ext4_commit_super
Zhang Yi <[email protected]>
ext4: fix check to prevent false positive report of incorrect used inodes
Steven Rostedt (VMware) <[email protected]>
ftrace: Handle commands when closing set_ftrace_filter file
Yang Yang <[email protected]>
jffs2: check the validity of dstlen in jffs2_zlib_compress()
Tony Ambardar <[email protected]>
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
Mahesh Salgaonkar <[email protected]>
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
lizhe <[email protected]>
jffs2: Fix kasan slab-out-of-bounds problem
Davide Caratti <[email protected]>
openvswitch: fix stack OOB read while fragmenting IPv4 packets
Bill Wendling <[email protected]>
arm64/vdso: Discard .note.gnu.property sections in vDSO
Lv Yunlong <[email protected]>
ALSA: sb: Fix two use after free in snd_sb_qsound_build
Lv Yunlong <[email protected]>
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
Bart Van Assche <[email protected]>
scsi: libfc: Fix a format specifier
James Smart <[email protected]>
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
Guchun Chen <[email protected]>
drm/amdgpu: fix NULL pointer dereference
Marijn Suijten <[email protected]>
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
Hans Verkuil <[email protected]>
media: gscpa/stv06xx: fix memory leak
Pavel Skripkin <[email protected]>
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
Yang Yingliang <[email protected]>
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
Yang Yingliang <[email protected]>
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
Yang Yingliang <[email protected]>
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
Colin Ian King <[email protected]>
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
Muhammad Usama Anjum <[email protected]>
media: em28xx: fix memory leak
Hans Verkuil <[email protected]>
media: gspca/sq905.c: fix uninitialized variable
Daniel Niv <[email protected]>
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
Sean Young <[email protected]>
media: ite-cir: check for receive overflow
Chaitanya Kulkarni <[email protected]>
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
Josef Bacik <[email protected]>
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
Yang Yingliang <[email protected]>
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
Pavel Machek <[email protected]>
intel_th: Consistency and off-by-one fix
Wei Yongjun <[email protected]>
spi: omap-100k: Fix reference leak to master
Wei Yongjun <[email protected]>
spi: dln2: Fix reference leak to master
John Millikin <[email protected]>
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
Rafael J. Wysocki <[email protected]>
PCI: PM: Do not read power state in pci_enable_device_flags()
Pawel Laszczak <[email protected]>
usb: gadget: uvc: add bInterval checking for HS mode
karthik alapati <[email protected]>
staging: wimax/i2400m: fix byte-order issue
Phillip Potter <[email protected]>
fbdev: zero-fill colormap in fbcmap.c
Seunghui Lee <[email protected]>
mmc: core: Set read only for SD cards with permanent write protect bit
DooHyun Hwang <[email protected]>
mmc: core: Do a power cycle when the CMD11 fails
Jeffrey Mitchell <[email protected]>
ecryptfs: fix kernel panic with null dev_name
Mark Langsdorf <[email protected]>
ACPI: custom_method: fix a possible memory leak
Mark Langsdorf <[email protected]>
ACPI: custom_method: fix potential use-after-free issue
Vasily Gorbik <[email protected]>
s390/disassembler: increase ebpf disasm buffer size
Mark Pearson <[email protected]>
platform/x86: thinkpad_acpi: Correct thermal sensor allocation
Chris Chiu <[email protected]>
USB: Add reset-resume quirk for WD19's Realtek Hub
Kai-Heng Feng <[email protected]>
USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet
Takashi Iwai <[email protected]>
ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX
Jiri Kosina <[email protected]>
iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()
Phillip Potter <[email protected]>
net: usb: ax88179_178a: initialize local variables before use
Eric Caruso <[email protected]>
timerfd: Reject ALARM timerfds without CAP_WAKE_ALARM
-------------
Diffstat:
Makefile | 4 +-
arch/arc/kernel/entry.S | 4 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
arch/arm/mm/cache-v7.S | 51 +++++++++---------
arch/arm64/kernel/vdso/vdso.lds.S | 8 ++-
arch/mips/include/asm/div64.h | 55 ++++++++++++++------
arch/powerpc/Kconfig.debug | 1 +
arch/powerpc/include/uapi/asm/errno.h | 1 +
arch/powerpc/kernel/eeh.c | 11 ++--
arch/powerpc/kernel/iommu.c | 4 +-
arch/powerpc/kernel/prom.c | 2 +-
arch/powerpc/lib/feature-fixups.c | 17 +++++-
arch/powerpc/platforms/52xx/lite5200_sleep.S | 2 +-
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +-
arch/s390/kernel/dis.c | 2 +-
arch/s390/kvm/gaccess.h | 23 ++++++---
arch/um/kernel/dyn.lds.S | 6 +++
arch/um/kernel/uml.lds.S | 6 +++
arch/x86/Makefile | 1 +
arch/x86/kernel/cpu/perf_event_amd_iommu.c | 6 +--
arch/x86/kvm/x86.c | 1 +
arch/x86/lib/msr-smp.c | 4 +-
drivers/acpi/custom_method.c | 4 +-
drivers/ata/libahci_platform.c | 4 +-
drivers/ata/pata_arasan_cf.c | 15 ++++--
drivers/ata/pata_ixp4xx_cf.c | 6 ++-
drivers/ata/sata_mv.c | 4 ++
drivers/char/ttyprintk.c | 11 ++++
drivers/clk/socfpga/clk-gate-a10.c | 1 +
drivers/crypto/qat/qat_common/adf_transport.c | 1 +
drivers/crypto/qat/qat_dh895xcc/adf_isr.c | 29 ++++++++---
drivers/crypto/qat/qat_dh895xccvf/adf_isr.c | 17 ++++--
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 10 +++-
drivers/gpu/drm/radeon/radeon_atombios.c | 6 +--
drivers/gpu/drm/radeon/radeon_kms.c | 1 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-plantronics.c | 60 +++++++++++++++++++++-
drivers/hsi/hsi.c | 3 +-
drivers/hwtracing/intel_th/gth.c | 4 +-
drivers/i2c/busses/i2c-cadence.c | 5 +-
drivers/i2c/busses/i2c-jz4780.c | 5 +-
drivers/i2c/busses/i2c-sh7760.c | 5 +-
drivers/isdn/capi/kcapi.c | 4 +-
drivers/md/dm-ioctl.c | 2 +-
drivers/md/md.c | 35 +++++++------
drivers/md/persistent-data/dm-btree-internal.h | 4 +-
drivers/md/persistent-data/dm-space-map-common.c | 2 +
drivers/md/persistent-data/dm-space-map-common.h | 8 +--
drivers/media/i2c/adv7511-v4l2.c | 2 +-
drivers/media/pci/saa7164/saa7164-encoder.c | 20 ++++----
drivers/media/platform/vivid/vivid-vid-out.c | 2 +-
drivers/media/rc/ite-cir.c | 8 ++-
drivers/media/tuners/m88rs6000t.c | 6 +--
drivers/media/usb/dvb-usb/dvb-usb-init.c | 20 ++++++--
drivers/media/usb/dvb-usb/dvb-usb.h | 3 +-
drivers/media/usb/em28xx/em28xx-dvb.c | 1 +
drivers/media/usb/gspca/gspca.c | 2 +
drivers/media/usb/gspca/gspca.h | 1 +
drivers/media/usb/gspca/sq905.c | 2 +-
drivers/media/usb/gspca/stv06xx/stv06xx.c | 9 ++++
drivers/memory/omap-gpmc.c | 7 ++-
drivers/misc/kgdbts.c | 26 +++++-----
drivers/misc/lis3lv02d/lis3lv02d.c | 21 ++++++--
drivers/misc/vmw_vmci/vmci_doorbell.c | 2 +-
drivers/misc/vmw_vmci/vmci_guest.c | 2 +-
drivers/mmc/core/core.c | 2 +-
drivers/mmc/core/sd.c | 6 +++
drivers/mtd/mtdchar.c | 8 +--
drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +
drivers/net/ethernet/ti/davinci_emac.c | 4 +-
drivers/net/fddi/Kconfig | 15 +++---
drivers/net/fddi/defxx.c | 47 +++++++++++------
drivers/net/usb/ax88179_178a.c | 4 +-
drivers/net/wan/lapbether.c | 32 +++++++++---
drivers/net/wimax/i2400m/op-rfkill.c | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_wx.c | 6 ++-
drivers/net/wireless/iwlwifi/pcie/tx.c | 7 +--
drivers/net/wireless/mediatek/mt7601u/eeprom.c | 2 +-
drivers/net/wireless/mwl8k.c | 1 +
drivers/net/wireless/wl3501.h | 47 +++++++++--------
drivers/net/wireless/wl3501_cs.c | 54 ++++++++++---------
drivers/nfc/pn533.c | 3 ++
drivers/pci/hotplug/acpiphp_glue.c | 1 +
drivers/pci/pci.c | 16 ++----
drivers/pci/probe.c | 1 +
drivers/phy/phy-twl4030-usb.c | 2 +-
drivers/platform/x86/thinkpad_acpi.c | 31 +++++++----
drivers/power/generic-adc-battery.c | 2 +-
drivers/power/s3c_adc_battery.c | 2 +-
drivers/scsi/jazz_esp.c | 4 +-
drivers/scsi/libfc/fc_lport.c | 2 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 2 -
drivers/scsi/lpfc/lpfc_sli.c | 1 -
drivers/scsi/sni_53c710.c | 5 +-
drivers/scsi/sun3x_esp.c | 4 +-
drivers/spi/spi-dln2.c | 2 +-
drivers/spi/spi-omap-100k.c | 6 +--
drivers/staging/iio/light/tsl2583.c | 9 ++++
drivers/staging/media/omap4iss/iss.c | 4 +-
drivers/staging/rtl8192u/r8192U_core.c | 2 +-
drivers/target/target_core_pscsi.c | 3 +-
drivers/thermal/fair_share.c | 4 ++
drivers/tty/tty_io.c | 8 +--
drivers/usb/class/cdc-acm.c | 2 -
drivers/usb/core/hub.c | 6 +--
drivers/usb/core/quirks.c | 4 ++
drivers/usb/dwc2/core.h | 2 +
drivers/usb/dwc2/gadget.c | 3 +-
drivers/usb/gadget/function/f_fs.c | 3 +-
drivers/usb/gadget/function/f_uvc.c | 7 ++-
drivers/usb/gadget/udc/dummy_hcd.c | 23 ++++++---
drivers/usb/gadget/udc/fotg210-udc.c | 26 +++++++---
drivers/usb/gadget/udc/pch_udc.c | 49 ++++++++++++------
drivers/usb/gadget/udc/r8a66597-udc.c | 2 +
drivers/usb/host/fotg210-hcd.c | 4 +-
drivers/usb/host/sl811-hcd.c | 9 ++--
drivers/usb/host/xhci-ext-caps.h | 5 +-
drivers/usb/host/xhci.c | 6 +--
drivers/video/fbdev/core/fbcmap.c | 8 +--
fs/btrfs/relocation.c | 6 +--
fs/dlm/debug_fs.c | 1 +
fs/ecryptfs/main.c | 6 +++
fs/ext4/ialloc.c | 48 +++++++++++------
fs/ext4/super.c | 6 ++-
fs/fuse/cuse.c | 2 +
fs/jffs2/compr_rtime.c | 3 ++
fs/jffs2/scan.c | 2 +-
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
fs/nfs/inode.c | 8 +--
fs/nfs/nfs42proc.c | 5 +-
fs/squashfs/file.c | 6 +--
fs/timerfd.c | 10 ++++
include/linux/hid.h | 2 +
include/linux/tty_driver.h | 2 +-
include/net/bluetooth/hci_core.h | 1 +
include/scsi/libfcoe.h | 2 +-
kernel/kexec_file.c | 4 +-
kernel/trace/ftrace.c | 5 +-
kernel/trace/trace.c | 45 +++++++---------
kernel/trace/trace_clock.c | 44 +++++++++++-----
lib/kobject_uevent.c | 9 ++--
mm/ksm.c | 1 +
net/bluetooth/hci_event.c | 3 +-
net/bluetooth/l2cap_core.c | 4 ++
net/hsr/hsr_framereg.c | 3 +-
net/ipv6/ip6_gre.c | 3 --
net/ipv6/ip6_tunnel.c | 3 +-
net/ipv6/ip6_vti.c | 3 +-
net/ipv6/sit.c | 5 +-
net/mac80211/main.c | 7 ++-
net/mac80211/mlme.c | 5 ++
net/nfc/digital_dep.c | 2 +
net/nfc/llcp_sock.c | 4 ++
net/openvswitch/actions.c | 8 +--
net/sctp/sm_make_chunk.c | 2 +-
net/sctp/sm_statefuns.c | 3 +-
net/sctp/socket.c | 38 ++++++++------
net/tipc/netlink_compat.c | 2 +-
net/vmw_vsock/vmci_transport.c | 3 +-
net/wireless/scan.c | 2 +
samples/kfifo/bytestream-example.c | 8 ++-
samples/kfifo/inttype-example.c | 8 ++-
samples/kfifo/record-example.c | 8 ++-
scripts/kconfig/nconf.c | 2 +-
sound/core/init.c | 2 -
sound/isa/sb/emu8000.c | 4 +-
sound/isa/sb/sb16_csp.c | 8 ++-
sound/pci/hda/hda_generic.c | 16 ++++--
sound/pci/hda/patch_realtek.c | 17 +++---
sound/pci/rme9652/hdsp.c | 3 +-
sound/pci/rme9652/hdspm.c | 3 +-
sound/pci/rme9652/rme9652.c | 3 +-
sound/soc/codecs/rt286.c | 23 +++++----
sound/usb/card.c | 14 ++---
sound/usb/quirks-table.h | 10 ++++
sound/usb/quirks.c | 16 ++++--
sound/usb/usbaudio.h | 2 +
tools/testing/selftests/lib.mk | 4 ++
184 files changed, 1050 insertions(+), 541 deletions(-)
From: Chris Chiu <[email protected]>
commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream.
Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work
after the system resumes from suspend with remote wakeup enabled
device connected:
[ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71)
[ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71)
Information of this hub:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=5487 Rev= 1.47
S: Manufacturer=Dell Inc.
S: Product=Dell dock
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
The failure results from the ETIMEDOUT by chance when turning on
the suspend feature for the specified port of the hub. The port
seems to be in an unknown state so the hub_activate during resume
fails the hub_port_status, then the hub will fail to work.
The quirky hub needs the reset-resume quirk to function correctly.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Chris Chiu <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -245,6 +245,7 @@ static const struct usb_device_id usb_qu
/* Realtek hub in Dell WD19 (Type-C) */
{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+ { USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },
/* Generic RTL8153 based ethernet adapters */
{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
From: Yang Yang <[email protected]>
commit 90ada91f4610c5ef11bc52576516d96c496fc3f1 upstream.
KASAN reports a BUG when download file in jffs2 filesystem.It is
because when dstlen == 1, cpage_out will write array out of bounds.
Actually, data will not be compressed in jffs2_zlib_compress() if
data's length less than 4.
[ 393.799778] BUG: KASAN: slab-out-of-bounds in jffs2_rtime_compress+0x214/0x2f0 at addr ffff800062e3b281
[ 393.809166] Write of size 1 by task tftp/2918
[ 393.813526] CPU: 3 PID: 2918 Comm: tftp Tainted: G B 4.9.115-rt93-EMBSYS-CGEL-6.1.R6-dirty #1
[ 393.823173] Hardware name: LS1043A RDB Board (DT)
[ 393.827870] Call trace:
[ 393.830322] [<ffff20000808c700>] dump_backtrace+0x0/0x2f0
[ 393.835721] [<ffff20000808ca04>] show_stack+0x14/0x20
[ 393.840774] [<ffff2000086ef700>] dump_stack+0x90/0xb0
[ 393.845829] [<ffff20000827b19c>] kasan_object_err+0x24/0x80
[ 393.851402] [<ffff20000827b404>] kasan_report_error+0x1b4/0x4d8
[ 393.857323] [<ffff20000827bae8>] kasan_report+0x38/0x40
[ 393.862548] [<ffff200008279d44>] __asan_store1+0x4c/0x58
[ 393.867859] [<ffff2000084ce2ec>] jffs2_rtime_compress+0x214/0x2f0
[ 393.873955] [<ffff2000084bb3b0>] jffs2_selected_compress+0x178/0x2a0
[ 393.880308] [<ffff2000084bb530>] jffs2_compress+0x58/0x478
[ 393.885796] [<ffff2000084c5b34>] jffs2_write_inode_range+0x13c/0x450
[ 393.892150] [<ffff2000084be0b8>] jffs2_write_end+0x2a8/0x4a0
[ 393.897811] [<ffff2000081f3008>] generic_perform_write+0x1c0/0x280
[ 393.903990] [<ffff2000081f5074>] __generic_file_write_iter+0x1c4/0x228
[ 393.910517] [<ffff2000081f5210>] generic_file_write_iter+0x138/0x288
[ 393.916870] [<ffff20000829ec1c>] __vfs_write+0x1b4/0x238
[ 393.922181] [<ffff20000829ff00>] vfs_write+0xd0/0x238
[ 393.927232] [<ffff2000082a1ba8>] SyS_write+0xa0/0x110
[ 393.932283] [<ffff20000808429c>] __sys_trace_return+0x0/0x4
[ 393.937851] Object at ffff800062e3b280, in cache kmalloc-64 size: 64
[ 393.944197] Allocated:
[ 393.946552] PID = 2918
[ 393.948913] save_stack_trace_tsk+0x0/0x220
[ 393.953096] save_stack_trace+0x18/0x20
[ 393.956932] kasan_kmalloc+0xd8/0x188
[ 393.960594] __kmalloc+0x144/0x238
[ 393.963994] jffs2_selected_compress+0x48/0x2a0
[ 393.968524] jffs2_compress+0x58/0x478
[ 393.972273] jffs2_write_inode_range+0x13c/0x450
[ 393.976889] jffs2_write_end+0x2a8/0x4a0
[ 393.980810] generic_perform_write+0x1c0/0x280
[ 393.985251] __generic_file_write_iter+0x1c4/0x228
[ 393.990040] generic_file_write_iter+0x138/0x288
[ 393.994655] __vfs_write+0x1b4/0x238
[ 393.998228] vfs_write+0xd0/0x238
[ 394.001543] SyS_write+0xa0/0x110
[ 394.004856] __sys_trace_return+0x0/0x4
[ 394.008684] Freed:
[ 394.010691] PID = 2918
[ 394.013051] save_stack_trace_tsk+0x0/0x220
[ 394.017233] save_stack_trace+0x18/0x20
[ 394.021069] kasan_slab_free+0x88/0x188
[ 394.024902] kfree+0x6c/0x1d8
[ 394.027868] jffs2_sum_write_sumnode+0x2c4/0x880
[ 394.032486] jffs2_do_reserve_space+0x198/0x598
[ 394.037016] jffs2_reserve_space+0x3f8/0x4d8
[ 394.041286] jffs2_write_inode_range+0xf0/0x450
[ 394.045816] jffs2_write_end+0x2a8/0x4a0
[ 394.049737] generic_perform_write+0x1c0/0x280
[ 394.054179] __generic_file_write_iter+0x1c4/0x228
[ 394.058968] generic_file_write_iter+0x138/0x288
[ 394.063583] __vfs_write+0x1b4/0x238
[ 394.067157] vfs_write+0xd0/0x238
[ 394.070470] SyS_write+0xa0/0x110
[ 394.073783] __sys_trace_return+0x0/0x4
[ 394.077612] Memory state around the buggy address:
[ 394.082404] ffff800062e3b180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 394.089623] ffff800062e3b200: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 394.096842] >ffff800062e3b280: 01 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 394.104056] ^
[ 394.107283] ffff800062e3b300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 394.114502] ffff800062e3b380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 394.121718] ==================================================================
Signed-off-by: Yang Yang <[email protected]>
Cc: Joel Stanley <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/compr_rtime.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/jffs2/compr_rtime.c
+++ b/fs/jffs2/compr_rtime.c
@@ -37,6 +37,9 @@ static int jffs2_rtime_compress(unsigned
int outpos = 0;
int pos=0;
+ if (*dstlen <= 3)
+ return -1;
+
memset(positions,0,sizeof(positions));
while (pos < (*sourcelen) && outpos <= (*dstlen)-2) {
From: Daniel Niv <[email protected]>
[ Upstream commit c759b2970c561e3b56aa030deb13db104262adfe ]
Add a fix for the memory leak bugs that can occur when the
saa7164_encoder_register() function fails.
The function allocates memory without explicitly freeing
it when errors occur.
Add a better error handling that deallocate the unused buffers before the
function exits during a fail.
Signed-off-by: Daniel Niv <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7164/saa7164-encoder.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c
index 1b184c39ba97..966de363c575 100644
--- a/drivers/media/pci/saa7164/saa7164-encoder.c
+++ b/drivers/media/pci/saa7164/saa7164-encoder.c
@@ -1031,7 +1031,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
"(errno = %d), NO PCI configuration\n",
__func__, result);
result = -ENOMEM;
- goto failed;
+ goto fail_pci;
}
/* Establish encoder defaults here */
@@ -1085,7 +1085,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
100000, ENCODER_DEF_BITRATE);
if (hdl->error) {
result = hdl->error;
- goto failed;
+ goto fail_hdl;
}
port->std = V4L2_STD_NTSC_M;
@@ -1103,7 +1103,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
printk(KERN_INFO "%s: can't allocate mpeg device\n",
dev->name);
result = -ENOMEM;
- goto failed;
+ goto fail_hdl;
}
port->v4l_device->ctrl_handler = hdl;
@@ -1114,10 +1114,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
if (result < 0) {
printk(KERN_INFO "%s: can't register mpeg device\n",
dev->name);
- /* TODO: We're going to leak here if we don't dealloc
- The buffers above. The unreg function can't deal wit it.
- */
- goto failed;
+ goto fail_reg;
}
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
@@ -1139,9 +1136,14 @@ int saa7164_encoder_register(struct saa7164_port *port)
saa7164_api_set_encoder(port);
saa7164_api_get_encoder(port);
+ return 0;
- result = 0;
-failed:
+fail_reg:
+ video_device_release(port->v4l_device);
+ port->v4l_device = NULL;
+fail_hdl:
+ v4l2_ctrl_handler_free(hdl);
+fail_pci:
return result;
}
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 2c9541720c66899adf6f3600984cf3ef151295ad ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/adv7511-v4l2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c
index b35400e4e9af..e85777dfe81d 100644
--- a/drivers/media/i2c/adv7511-v4l2.c
+++ b/drivers/media/i2c/adv7511-v4l2.c
@@ -1570,7 +1570,7 @@ static int adv7511_remove(struct i2c_client *client)
client->addr << 1, client->adapter->name);
adv7511_init_setup(sd);
- cancel_delayed_work(&state->edid_handler);
+ cancel_delayed_work_sync(&state->edid_handler);
i2c_unregister_device(state->i2c_edid);
i2c_unregister_device(state->i2c_pktmem);
destroy_workqueue(state->work_queue);
--
2.30.2
From: Amey Telawane <[email protected]>
commit e09e28671cda63e6308b31798b997639120e2a21 upstream.
Strcpy is inherently not safe, and strlcpy() should be used instead.
__trace_find_cmdline() uses strcpy() because the comms saved must have a
terminating nul character, but it doesn't hurt to add the extra protection
of using strlcpy() instead of strcpy().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Amey Telawane <[email protected]>
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
Signed-off-by: Amit Pundir <[email protected]>
[ Updated change log and removed the "- 1" from len parameter ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1624,7 +1624,7 @@ static void __trace_find_cmdline(int pid
map = savedcmd->map_pid_to_cmdline[pid];
if (map != NO_CMDLINE_MAP)
- strcpy(comm, get_saved_cmdlines(map));
+ strlcpy(comm, get_saved_cmdlines(map), TASK_COMM_LEN);
else
strcpy(comm, "<...>");
}
From: Takashi Iwai <[email protected]>
commit b265047ac56bad8c4f3d0c8bf9cb4e828ee0d28e upstream.
Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2226,13 +2226,13 @@ static const struct snd_pci_quirk alc882
ALC882_FIXUP_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
ALC882_FIXUP_ACER_ASPIRE_8930G),
+ SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
+ ALC882_FIXUP_ACER_ASPIRE_4930G),
+ SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
- SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
- ALC882_FIXUP_ACER_ASPIRE_4930G),
- SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
SND_PCI_QUIRK(0x1025, 0x021e, "Acer Aspire 5739G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
From: Bart Van Assche <[email protected]>
[ Upstream commit 90d6697810f06aceea9de71ad836a8c7669789cd ]
Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h,
use the %u format specifier instead of %hu. This patch fixes the following
clang compiler warning:
warning: format specifies type
'unsigned short' but the argument has type 'u32' (aka 'unsigned int')
[-Wformat]
"lport->mfs:%hu\n", mfs, lport->mfs);
~~~ ^~~~~~~~~~
%u
Link: https://lore.kernel.org/r/[email protected]
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libfc/fc_lport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 867fc036d6ef..815d224b9ff8 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1754,7 +1754,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) {
FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
- "lport->mfs:%hu\n", mfs, lport->mfs);
+ "lport->mfs:%u\n", mfs, lport->mfs);
fc_lport_error(lport, fp);
goto out;
}
--
2.30.2
From: Steven Rostedt (VMware) <[email protected]>
commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream.
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 41 +++++++++++++++--------------------------
1 file changed, 15 insertions(+), 26 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1562,14 +1562,13 @@ void trace_stop_cmdline_recording(void);
static int trace_save_cmdline(struct task_struct *tsk)
{
- unsigned pid, idx;
+ unsigned tpid, idx;
/* treat recording of idle task as a success */
if (!tsk->pid)
return 1;
- if (unlikely(tsk->pid > PID_MAX_DEFAULT))
- return 0;
+ tpid = tsk->pid & (PID_MAX_DEFAULT - 1);
/*
* It's not the end of the world if we don't get
@@ -1580,26 +1579,15 @@ static int trace_save_cmdline(struct tas
if (!arch_spin_trylock(&trace_cmdline_lock))
return 0;
- idx = savedcmd->map_pid_to_cmdline[tsk->pid];
+ idx = savedcmd->map_pid_to_cmdline[tpid];
if (idx == NO_CMDLINE_MAP) {
idx = (savedcmd->cmdline_idx + 1) % savedcmd->cmdline_num;
- /*
- * Check whether the cmdline buffer at idx has a pid
- * mapped. We are going to overwrite that entry so we
- * need to clear the map_pid_to_cmdline. Otherwise we
- * would read the new comm for the old pid.
- */
- pid = savedcmd->map_cmdline_to_pid[idx];
- if (pid != NO_CMDLINE_MAP)
- savedcmd->map_pid_to_cmdline[pid] = NO_CMDLINE_MAP;
-
- savedcmd->map_cmdline_to_pid[idx] = tsk->pid;
- savedcmd->map_pid_to_cmdline[tsk->pid] = idx;
-
+ savedcmd->map_pid_to_cmdline[tpid] = idx;
savedcmd->cmdline_idx = idx;
}
+ savedcmd->map_cmdline_to_pid[idx] = tsk->pid;
set_cmdline(idx, tsk->comm);
arch_spin_unlock(&trace_cmdline_lock);
@@ -1610,6 +1598,7 @@ static int trace_save_cmdline(struct tas
static void __trace_find_cmdline(int pid, char comm[])
{
unsigned map;
+ int tpid;
if (!pid) {
strcpy(comm, "<idle>");
@@ -1621,16 +1610,16 @@ static void __trace_find_cmdline(int pid
return;
}
- if (pid > PID_MAX_DEFAULT) {
- strcpy(comm, "<...>");
- return;
+ tpid = pid & (PID_MAX_DEFAULT - 1);
+ map = savedcmd->map_pid_to_cmdline[tpid];
+ if (map != NO_CMDLINE_MAP) {
+ tpid = savedcmd->map_cmdline_to_pid[map];
+ if (tpid == pid) {
+ strlcpy(comm, get_saved_cmdlines(map), TASK_COMM_LEN);
+ return;
+ }
}
-
- map = savedcmd->map_pid_to_cmdline[pid];
- if (map != NO_CMDLINE_MAP)
- strlcpy(comm, get_saved_cmdlines(map), TASK_COMM_LEN);
- else
- strcpy(comm, "<...>");
+ strcpy(comm, "<...>");
}
void trace_find_cmdline(int pid, char comm[])
From: Hans de Goede <[email protected]>
commit 3641762c1c9c7cfd84a7061a0a73054f09b412e3 upstream.
Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.
The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.
The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:
int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.
Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.
Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.
Fixes: 1510dd5954be ("lis3lv02d: avoid divide by zero due to unchecked")
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=785814
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1817027
BugLink: https://bugs.centos.org/view.php?id=10720
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/lis3lv02d/lis3lv02d.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -220,7 +220,7 @@ static int lis3_3dc_rates[16] = {0, 1, 1
static int lis3_3dlh_rates[4] = {50, 100, 400, 1000};
/* ODR is Output Data Rate */
-static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
+static int lis3lv02d_get_odr_index(struct lis3lv02d *lis3)
{
u8 ctrl;
int shift;
@@ -228,15 +228,23 @@ static int lis3lv02d_get_odr(struct lis3
lis3->read(lis3, CTRL_REG1, &ctrl);
ctrl &= lis3->odr_mask;
shift = ffs(lis3->odr_mask) - 1;
- return lis3->odrs[(ctrl >> shift)];
+ return (ctrl >> shift);
}
static int lis3lv02d_get_pwron_wait(struct lis3lv02d *lis3)
{
- int div = lis3lv02d_get_odr(lis3);
+ int odr_idx = lis3lv02d_get_odr_index(lis3);
+ int div = lis3->odrs[odr_idx];
- if (WARN_ONCE(div == 0, "device returned spurious data"))
+ if (div == 0) {
+ if (odr_idx == 0) {
+ /* Power-down mode, not sampling no need to sleep */
+ return 0;
+ }
+
+ dev_err(&lis3->pdev->dev, "Error unknown odrs-index: %d\n", odr_idx);
return -ENXIO;
+ }
/* LIS3 power on delay is quite long */
msleep(lis3->pwron_delay / div);
@@ -819,9 +827,12 @@ static ssize_t lis3lv02d_rate_show(struc
struct device_attribute *attr, char *buf)
{
struct lis3lv02d *lis3 = dev_get_drvdata(dev);
+ int odr_idx;
lis3lv02d_sysfs_poweron(lis3);
- return sprintf(buf, "%d\n", lis3lv02d_get_odr(lis3));
+
+ odr_idx = lis3lv02d_get_odr_index(lis3);
+ return sprintf(buf, "%d\n", lis3->odrs[odr_idx]);
}
static ssize_t lis3lv02d_rate_set(struct device *dev,
From: Hans Verkuil <[email protected]>
[ Upstream commit 4f4e6644cd876c844cdb3bea2dd7051787d5ae25 ]
For two of the supported sensors the stv06xx driver allocates memory which
is stored in sd->sensor_priv. This memory is freed on a disconnect, but if
the probe() fails, then it isn't freed and so this leaks memory.
Add a new probe_error() op that drivers can use to free any allocated
memory in case there was a probe failure.
Thanks to Pavel Skripkin <[email protected]> for discovering the cause
of the memory leak.
Reported-and-tested-by: [email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/gspca/gspca.c | 2 ++
drivers/media/usb/gspca/gspca.h | 1 +
drivers/media/usb/gspca/stv06xx/stv06xx.c | 9 +++++++++
3 files changed, 12 insertions(+)
diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index 17b7b02330c9..a4f64bdb8017 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -2131,6 +2131,8 @@ out:
#endif
v4l2_ctrl_handler_free(gspca_dev->vdev.ctrl_handler);
v4l2_device_unregister(&gspca_dev->v4l2_dev);
+ if (sd_desc->probe_error)
+ sd_desc->probe_error(gspca_dev);
kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
diff --git a/drivers/media/usb/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h
index d39adf90303b..bec8fccc2c94 100644
--- a/drivers/media/usb/gspca/gspca.h
+++ b/drivers/media/usb/gspca/gspca.h
@@ -101,6 +101,7 @@ struct sd_desc {
cam_cf_op config; /* called on probe */
cam_op init; /* called on probe and resume */
cam_op init_controls; /* called on probe */
+ cam_v_op probe_error; /* called if probe failed, do cleanup here */
cam_op start; /* called on stream on after URBs creation */
cam_pkt_op pkt_scan;
/* optional operations */
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c
index 7d255529ed4c..40d4c99debb8 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -541,12 +541,21 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
static int stv06xx_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id);
+static void stv06xx_probe_error(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *)gspca_dev;
+
+ kfree(sd->sensor_priv);
+ sd->sensor_priv = NULL;
+}
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.config = stv06xx_config,
.init = stv06xx_init,
.init_controls = stv06xx_init_controls,
+ .probe_error = stv06xx_probe_error,
.start = stv06xx_start,
.stopN = stv06xx_stopN,
.pkt_scan = stv06xx_pkt_scan,
--
2.30.2
From: Colin Ian King <[email protected]>
commit 8dbc2ccac5a65c5b57e3070e36a3dc97c7970d96 upstream.
Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can
copy back uninitialised data in value_tmp that pointer *value points
to. This can occur when rdev->family is less than CHIP_BONAIRE and
less than CHIP_TAHITI. Fix this by adding in a missing -EINVAL
so that no invalid value is copied back to userspace.
Addresses-Coverity: ("Uninitialized scalar variable)
Cc: [email protected] # 3.13+
Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_kms.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -503,6 +503,7 @@ static int radeon_info_ioctl(struct drm_
*value = rdev->config.si.backend_enable_mask;
} else {
DRM_DEBUG_KMS("BACKEND_ENABLED_MASK is si+ only!\n");
+ return -EINVAL;
}
break;
case RADEON_INFO_MAX_SCLK:
From: Zhao Heming <[email protected]>
commit 6a4db2a60306eb65bfb14ccc9fde035b74a4b4e7 upstream.
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.
This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).
For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.
*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt
*** script ***
about trigger every time with below script
```
1 node1="mdcluster1"
2 node2="mdcluster2"
3
4 mdadm -Ss
5 ssh ${node2} "mdadm -Ss"
6 wipefs -a /dev/sda /dev/sdb
7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \
/dev/sdb --assume-clean
8
9 for i in {1..10}; do
10 echo ==== $i ====;
11
12 echo "test ...."
13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
14 sleep 1
15
16 echo "clean ....."
17 ssh ${node2} "mdadm -Ss"
18 done
```
I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.
*** stack ***
```
[ 884.226509] mddev_put+0x1c/0xe0 [md_mod]
[ 884.226515] md_open+0x3c/0xe0 [md_mod]
[ 884.226518] __blkdev_get+0x30d/0x710
[ 884.226520] ? bd_acquire+0xd0/0xd0
[ 884.226522] blkdev_get+0x14/0x30
[ 884.226524] do_dentry_open+0x204/0x3a0
[ 884.226531] path_openat+0x2fc/0x1520
[ 884.226534] ? seq_printf+0x4e/0x70
[ 884.226536] do_filp_open+0x9b/0x110
[ 884.226542] ? md_release+0x20/0x20 [md_mod]
[ 884.226543] ? seq_read+0x1d8/0x3e0
[ 884.226545] ? kmem_cache_alloc+0x18a/0x270
[ 884.226547] ? do_sys_open+0x1bd/0x260
[ 884.226548] do_sys_open+0x1bd/0x260
[ 884.226551] do_syscall_64+0x5b/0x1e0
[ 884.226554] entry_SYSCALL_64_after_hwframe+0x44/0xa9
```
*** rootcause ***
"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.
The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.
```
<thread 1>: "mdadm -Ss"
md_release
mddev_put deletes mddev from all_mddevs
queue_work for mddev_delayed_delete
at this time, "/dev/md0" is still available for opening
<thread 2>: "mdadm --monitor ..."
md_open
+ mddev_find can't find mddev of /dev/md0, and create a new mddev and
| return.
+ trigger "if (mddev->gendisk != bdev->bd_disk)" and return
-ERESTARTSYS.
```
In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.
In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Zhao Heming <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 368cad6cd53a..464cca5d5952 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7821,8 +7821,7 @@ static int md_open(struct block_device *bdev, fmode_t mode)
/* Wait until bdev->bd_disk is definitely gone */
if (work_pending(&mddev->del_work))
flush_workqueue(md_misc_wq);
- /* Then retry the open from the top */
- return -ERESTARTSYS;
+ return -EBUSY;
}
BUG_ON(mddev != bdev->bd_disk->private_data);
--
2.31.1
From: Lv Yunlong <[email protected]>
commit 4fb44dd2c1dda18606348acdfdb97e8759dde9df upstream.
In snd_sb_qsound_build, snd_ctl_add(..,p->qsound_switch...) and
snd_ctl_add(..,p->qsound_space..) are called. But the second
arguments of snd_ctl_add() could be freed via snd_ctl_add_replace()
->snd_ctl_free_one(). After the error code is returned,
snd_sb_qsound_destroy(p) is called in __error branch.
But in snd_sb_qsound_destroy(), the freed p->qsound_switch and
p->qsound_space are still used by snd_ctl_remove().
My patch set p->qsound_switch and p->qsound_space to NULL if
snd_ctl_add() failed to avoid the uaf bugs. But these codes need
to further be improved with the code style.
Signed-off-by: Lv Yunlong <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/sb/sb16_csp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -1059,10 +1059,14 @@ static int snd_sb_qsound_build(struct sn
spin_lock_init(&p->q_lock);
- if ((err = snd_ctl_add(card, p->qsound_switch = snd_ctl_new1(&snd_sb_qsound_switch, p))) < 0)
+ if ((err = snd_ctl_add(card, p->qsound_switch = snd_ctl_new1(&snd_sb_qsound_switch, p))) < 0) {
+ p->qsound_switch = NULL;
goto __error;
- if ((err = snd_ctl_add(card, p->qsound_space = snd_ctl_new1(&snd_sb_qsound_space, p))) < 0)
+ }
+ if ((err = snd_ctl_add(card, p->qsound_space = snd_ctl_new1(&snd_sb_qsound_space, p))) < 0) {
+ p->qsound_space = NULL;
goto __error;
+ }
return 0;
From: Lv Yunlong <[email protected]>
commit 1c98f574403dbcf2eb832d5535a10d967333ef2d upstream.
Our code analyzer reported a uaf.
In snd_emu8000_create_mixer, the callee snd_ctl_add(..,emu->controls[i])
calls snd_ctl_add_replace(.., kcontrol,..). Inside snd_ctl_add_replace(),
if error happens, kcontrol will be freed by snd_ctl_free_one(kcontrol).
Then emu->controls[i] points to a freed memory, and the execution comes
to __error branch of snd_emu8000_create_mixer. The freed emu->controls[i]
is used in snd_ctl_remove(card, emu->controls[i]).
My patch set emu->controls[i] to NULL if snd_ctl_add() failed to avoid
the uaf.
Signed-off-by: Lv Yunlong <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/sb/emu8000.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/sound/isa/sb/emu8000.c
+++ b/sound/isa/sb/emu8000.c
@@ -1042,8 +1042,10 @@ snd_emu8000_create_mixer(struct snd_card
memset(emu->controls, 0, sizeof(emu->controls));
for (i = 0; i < EMU8000_NUM_CONTROLS; i++) {
- if ((err = snd_ctl_add(card, emu->controls[i] = snd_ctl_new1(mixer_defs[i], emu))) < 0)
+ if ((err = snd_ctl_add(card, emu->controls[i] = snd_ctl_new1(mixer_defs[i], emu))) < 0) {
+ emu->controls[i] = NULL;
goto __error;
+ }
}
return 0;
From: Joel Fernandes <[email protected]>
commit eaf260ac04d9b4cf9f458d5c97555bfff2da526e upstream.
Currently we stop recording comm for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
comm for idle task as a success.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Reported-by: Michael Sartain <[email protected]>
Signed-off-by: Joel Fernandes <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1564,7 +1564,11 @@ static int trace_save_cmdline(struct tas
{
unsigned pid, idx;
- if (!tsk->pid || unlikely(tsk->pid > PID_MAX_DEFAULT))
+ /* treat recording of idle task as a success */
+ if (!tsk->pid)
+ return 1;
+
+ if (unlikely(tsk->pid > PID_MAX_DEFAULT))
return 0;
/*
From: Bill Wendling <[email protected]>
[ Upstream commit 388708028e6937f3fc5fc19aeeb847f8970f489c ]
The arm64 assembler in binutils 2.32 and above generates a program
property note in a note section, .note.gnu.property, to encode used x86
ISAs and features. But the kernel linker script only contains a single
NOTE segment:
PHDRS
{
text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
note PT_NOTE FLAGS(4); /* PF_R */
}
The NOTE segment generated by the vDSO linker script is aligned to 4 bytes.
But the .note.gnu.property section must be aligned to 8 bytes on arm64.
$ readelf -n vdso64.so
Displaying notes found in: .note
Owner Data size Description
Linux 0x00000004 Unknown note type: (0x00000000)
description data: 06 00 00 00
readelf: Warning: note with invalid namesz and/or descsz found at offset 0x20
readelf: Warning: type: 0x78, namesize: 0x00000100, descsize: 0x756e694c, alignment: 8
Since the note.gnu.property section in the vDSO is not checked by the
dynamic linker, discard the .note.gnu.property sections in the vDSO.
Similar to commit 4caffe6a28d31 ("x86/vdso: Discard .note.gnu.property
sections in vDSO"), but for arm64.
Signed-off-by: Bill Wendling <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/vdso/vdso.lds.S | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/arm64/kernel/vdso/vdso.lds.S
+++ b/arch/arm64/kernel/vdso/vdso.lds.S
@@ -39,6 +39,13 @@ SECTIONS
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
+ /*
+ * Discard .note.gnu.property sections which are unused and have
+ * different alignment requirement from vDSO note sections.
+ */
+ /DISCARD/ : {
+ *(.note.GNU-stack .note.gnu.property)
+ }
.note : { *(.note.*) } :text :note
. = ALIGN(16);
@@ -59,7 +66,6 @@ SECTIONS
PROVIDE(end = .);
/DISCARD/ : {
- *(.note.GNU-stack)
*(.data .data.* .gnu.linkonce.d.* .sdata*)
*(.bss .sbss .dynbss .dynsbss)
}
From: Christoph Hellwig <[email protected]>
commit 8b57251f9a91f5e5a599de7549915d2d226cc3af upstream.
Factor out a self-contained helper to just lookup a mddev by the dev_t
"unit".
Cc: [email protected]
Reviewed-by: Heming Zhao <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -515,6 +515,17 @@ void mddev_init(struct mddev *mddev)
}
EXPORT_SYMBOL_GPL(mddev_init);
+static struct mddev *mddev_find_locked(dev_t unit)
+{
+ struct mddev *mddev;
+
+ list_for_each_entry(mddev, &all_mddevs, all_mddevs)
+ if (mddev->unit == unit)
+ return mddev;
+
+ return NULL;
+}
+
static struct mddev *mddev_find(dev_t unit)
{
struct mddev *mddev, *new = NULL;
@@ -526,13 +537,13 @@ static struct mddev *mddev_find(dev_t un
spin_lock(&all_mddevs_lock);
if (unit) {
- list_for_each_entry(mddev, &all_mddevs, all_mddevs)
- if (mddev->unit == unit) {
- mddev_get(mddev);
- spin_unlock(&all_mddevs_lock);
- kfree(new);
- return mddev;
- }
+ mddev = mddev_find_locked(unit);
+ if (mddev) {
+ mddev_get(mddev);
+ spin_unlock(&all_mddevs_lock);
+ kfree(new);
+ return mddev;
+ }
if (new) {
list_add(&new->all_mddevs, &all_mddevs);
@@ -558,12 +569,7 @@ static struct mddev *mddev_find(dev_t un
return NULL;
}
- is_free = 1;
- list_for_each_entry(mddev, &all_mddevs, all_mddevs)
- if (mddev->unit == dev) {
- is_free = 0;
- break;
- }
+ is_free = !mddev_find_locked(dev);
}
new->unit = dev;
new->md_minor = MINOR(dev);
From: James Smart <[email protected]>
[ Upstream commit fffd18ec6579c2d9c72b212169259062fe747888 ]
Fix a crash caused by a double put on the node when the driver completed an
ACC for an unsolicted abort on the same node. The second put was executed
by lpfc_nlp_not_used() and is wrong because the completion routine executes
the nlp_put when the iocbq was released. Additionally, the driver is
issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node
into NPR. This call does nothing.
Remove the lpfc_nlp_not_used call and additional set_state in the
completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't
necessary.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 2 --
drivers/scsi/lpfc/lpfc_sli.c | 1 -
2 files changed, 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 6aa0698925da..1a44102b43c3 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1604,8 +1604,6 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
ndlp->nlp_last_elscmd = ELS_CMD_PLOGI;
lpfc_issue_els_logo(vport, ndlp, 0);
- ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
return ndlp->nlp_state;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 97c0d79a2601..9055a8fce3d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15049,7 +15049,6 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
if (cmd_iocbq) {
ndlp = (struct lpfc_nodelist *)cmd_iocbq->context1;
lpfc_nlp_put(ndlp);
- lpfc_nlp_not_used(ndlp);
lpfc_sli_release_iocbq(phba, cmd_iocbq);
}
--
2.30.2
From: Steven Rostedt (VMware) <[email protected]>
commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream.
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Tested-by: Konstantin Kharlamov <[email protected]>
Tested-by: Todd Brandt <[email protected]>
Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_clock.c | 48 ++++++++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 16 deletions(-)
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -93,33 +93,49 @@ u64 notrace trace_clock_global(void)
{
unsigned long flags;
int this_cpu;
- u64 now;
+ u64 now, prev_time;
local_irq_save(flags);
this_cpu = raw_smp_processor_id();
- now = sched_clock_cpu(this_cpu);
+
/*
- * If in an NMI context then dont risk lockups and return the
- * cpu_clock() time:
+ * The global clock "guarantees" that the events are ordered
+ * between CPUs. But if two events on two different CPUS call
+ * trace_clock_global at roughly the same time, it really does
+ * not matter which one gets the earlier time. Just make sure
+ * that the same CPU will always show a monotonic clock.
+ *
+ * Use a read memory barrier to get the latest written
+ * time that was recorded.
*/
- if (unlikely(in_nmi()))
- goto out;
+ smp_rmb();
+ prev_time = READ_ONCE(trace_clock_struct.prev_time);
+ now = sched_clock_cpu(this_cpu);
- arch_spin_lock(&trace_clock_struct.lock);
+ /* Make sure that now is always greater than prev_time */
+ if ((s64)(now - prev_time) < 0)
+ now = prev_time + 1;
/*
- * TODO: if this happens often then maybe we should reset
- * my_scd->clock to prev_time+1, to make sure
- * we start ticking with the local clock from now on?
+ * If in an NMI context then dont risk lockups and simply return
+ * the current time.
*/
- if ((s64)(now - trace_clock_struct.prev_time) < 0)
- now = trace_clock_struct.prev_time + 1;
-
- trace_clock_struct.prev_time = now;
-
- arch_spin_unlock(&trace_clock_struct.lock);
+ if (unlikely(in_nmi()))
+ goto out;
+ /* Tracing can cause strange recursion, always use a try lock */
+ if (arch_spin_trylock(&trace_clock_struct.lock)) {
+ /* Reread prev_time in case it was already updated */
+ prev_time = READ_ONCE(trace_clock_struct.prev_time);
+ if ((s64)(now - prev_time) < 0)
+ now = prev_time + 1;
+
+ trace_clock_struct.prev_time = now;
+
+ /* The unlock acts as the wmb for the above rmb */
+ arch_spin_unlock(&trace_clock_struct.lock);
+ }
out:
local_irq_restore(flags);
From: Davide Caratti <[email protected]>
commit 7c0ea5930c1c211931819d83cfb157bff1539a4c upstream.
running openvswitch on kernels built with KASAN, it's possible to see the
following splat while testing fragmentation of IPv4 packets:
BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60
Read of size 1 at addr ffff888112fc713c by task handler2/1367
CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x92/0xc1
print_address_description.constprop.7+0x1a/0x150
kasan_report.cold.13+0x7f/0x111
ip_do_fragment+0x1b03/0x1f60
ovs_fragment+0x5bf/0x840 [openvswitch]
do_execute_actions+0x1bd5/0x2400 [openvswitch]
ovs_execute_actions+0xc8/0x3d0 [openvswitch]
ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch]
genl_family_rcv_msg_doit.isra.15+0x227/0x2d0
genl_rcv_msg+0x287/0x490
netlink_rcv_skb+0x120/0x380
genl_rcv+0x24/0x40
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f957079db07
Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48
RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07
RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019
RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0
The buggy address belongs to the page:
page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7
flags: 0x17ffffc0000000()
raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame:
ovs_fragment+0x0/0x840 [openvswitch]
this frame has 2 objects:
[32, 144) 'ovs_dst'
[192, 424) 'ovs_rt'
Memory state around the buggy address:
ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00
>ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
^
ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00
for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then,
in the following call graph:
ip_do_fragment()
ip_skb_dst_mtu()
ip_dst_mtu_maybe_forward()
ip_mtu_locked()
the pointer to struct dst_entry is used as pointer to struct rtable: this
turns the access to struct members like rt_mtu_locked into an OOB read in
the stack. Fix this changing the temporary variable used for IPv4 packets
in ovs_fragment(), similarly to what is done for IPv6 few lines below.
Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt")
Cc: <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/openvswitch/actions.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -694,16 +694,16 @@ static void ovs_fragment(struct net *net
}
if (ethertype == htons(ETH_P_IP)) {
- struct dst_entry ovs_dst;
+ struct rtable ovs_rt = { 0 };
unsigned long orig_dst;
prepare_frag(vport, skb);
- dst_init(&ovs_dst, &ovs_dst_ops, NULL, 1,
+ dst_init(&ovs_rt.dst, &ovs_dst_ops, NULL, 1,
DST_OBSOLETE_NONE, DST_NOCOUNT);
- ovs_dst.dev = vport->dev;
+ ovs_rt.dst.dev = vport->dev;
orig_dst = skb->_skb_refdst;
- skb_dst_set_noref(skb, &ovs_dst);
+ skb_dst_set_noref(skb, &ovs_rt.dst);
IPCB(skb)->frag_max_size = mru;
ip_do_fragment(net, skb->sk, skb, ovs_vport_output);
From: Fabian Vogt <[email protected]>
[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]
For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 7831c556a40b..1eda6fc750c1 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -827,7 +827,7 @@ static void fotg210_ep0in(struct fotg210_udc *fotg210)
if (req->req.length)
fotg210_start_dma(ep, req);
- if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+ if (req->req.actual == req->req.length)
fotg210_done(ep, req, 0);
} else {
fotg210_set_cxdone(fotg210);
--
2.30.2
From: Fabian Vogt <[email protected]>
[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]
When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 1eda6fc750c1..d0a9ce7d0635 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -385,8 +385,7 @@ static void fotg210_ep0_queue(struct fotg210_ep *ep,
}
if (ep->dir_in) { /* if IN */
fotg210_start_dma(ep, req);
- if ((req->req.length == req->req.actual) ||
- (req->req.actual < ep->ep.maxpacket))
+ if (req->req.length == req->req.actual)
fotg210_done(ep, req, 0);
} else { /* OUT */
u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR0);
--
2.30.2
From: Takashi Iwai <[email protected]>
commit b7529c18feecb1af92f9db08c8e7fe446a82d96d upstream.
Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2244,11 +2244,11 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
+ SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
+ SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9060, "Sony Vaio VPCL14M1R", ALC882_FIXUP_NO_PRIMARY_HP),
- SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
- SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
/* All Apple entries are in codec SSIDs */
SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC889_FIXUP_MBP_VREF),
From: lizhe <[email protected]>
commit 960b9a8a7676b9054d8b46a2c7db52a0c8766b56 upstream.
KASAN report a slab-out-of-bounds problem. The logs are listed below.
It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1"
bytes for fd->name and we check crc with length rd->nsize. If checkedlen
is less than rd->nsize, it will cause the slab-out-of-bounds problem.
jffs2: Dirent at *** has zeroes in name. Truncating to %d char
==================================================================
BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1
Read of size 1 by task test_JFFS2/915
=============================================================================
BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915
___slab_alloc+0x580/0x5f0
__slab_alloc.isra.24+0x4e/0x64
__kmalloc+0x170/0x300
jffs2_alloc_full_dirent+0x2a/0x40
jffs2_scan_eraseblock+0x1ca4/0x3b64
jffs2_scan_medium+0x285/0xfe0
jffs2_do_mount_fs+0x5fb/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915
__slab_free+0x372/0x4e4
kfree+0x1d4/0x20c
jffs2_free_full_dirent+0x22/0x40
jffs2_build_remove_unlinked_inode+0x17a/0x1e4
jffs2_do_mount_fs+0x1646/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
entry_SYSCALL_64_fastpath+0x1e/0x97
Call Trace:
[<ffffffff815befef>] dump_stack+0x59/0x7e
[<ffffffff812d1d65>] print_trailer+0x125/0x1b0
[<ffffffff812d82c8>] object_err+0x34/0x40
[<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534
[<ffffffff81132401>] ? vprintk+0x2d/0x40
[<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260
[<ffffffff812db41a>] kasan_report+0x26/0x30
[<ffffffff812d9fc1>] __asan_load1+0x3d/0x50
[<ffffffff815f1ee2>] crc32_le+0x1ce/0x260
[<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40
[<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64
[<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0
[<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc
[<ffffffff818169fb>] ? mtd_point+0xf7/0x130
[<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0
[<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d57df>] ? __kmalloc+0x12b/0x300
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240
[<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc
[<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac
[<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0
[<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144
[<ffffffff81819eb6>] mount_mtd+0x222/0x2f0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144
[<ffffffff81258757>] ? free_pages+0x13/0x1c
[<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0
[<ffffffff81492b35>] jffs2_mount+0x41/0x60
[<ffffffff81302fb7>] mount_fs+0x63/0x230
[<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0
[<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4
[<ffffffff8133ceec>] do_mount+0xae8/0x1940
[<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10
[<ffffffff8133c404>] ? copy_mount_string+0x40/0x40
[<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc
[<ffffffff81253a89>] ? __get_free_pages+0x25/0x50
[<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264
[<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0
[<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560
[<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190
[<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97
[<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0
Memory state around the buggy address:
ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc
^
ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Cc: [email protected]
Reported-by: Kunkun Xu <[email protected]>
Signed-off-by: lizhe <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/scan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -1075,7 +1075,7 @@ static int jffs2_scan_dirent_node(struct
memcpy(&fd->name, rd->name, checkedlen);
fd->name[checkedlen] = 0;
- crc = crc32(0, fd->name, rd->nsize);
+ crc = crc32(0, fd->name, checkedlen);
if (crc != je32_to_cpu(rd->name_crc)) {
pr_notice("%s(): Name CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
__func__, ofs, je32_to_cpu(rd->name_crc), crc);
From: Claudio Imbrenda <[email protected]>
commit c5d1f6b531e68888cbe6718b3f77a60115d58b9c upstream.
A new function _kvm_s390_real_to_abs will apply prefixing to a real address
with a given prefix value.
The old kvm_s390_real_to_abs becomes now a wrapper around the new function.
This is needed to avoid code duplication in vSIE.
Signed-off-by: Claudio Imbrenda <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Thomas Huth <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/gaccess.h | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -21,17 +21,14 @@
/**
* kvm_s390_real_to_abs - convert guest real address to guest absolute address
- * @vcpu - guest virtual cpu
+ * @prefix - guest prefix
* @gra - guest real address
*
* Returns the guest absolute address that corresponds to the passed guest real
- * address @gra of a virtual guest cpu by applying its prefix.
+ * address @gra of by applying the given prefix.
*/
-static inline unsigned long kvm_s390_real_to_abs(struct kvm_vcpu *vcpu,
- unsigned long gra)
+static inline unsigned long _kvm_s390_real_to_abs(u32 prefix, unsigned long gra)
{
- unsigned long prefix = kvm_s390_get_prefix(vcpu);
-
if (gra < 2 * PAGE_SIZE)
gra += prefix;
else if (gra >= prefix && gra < prefix + 2 * PAGE_SIZE)
@@ -40,6 +37,20 @@ static inline unsigned long kvm_s390_rea
}
/**
+ * kvm_s390_real_to_abs - convert guest real address to guest absolute address
+ * @vcpu - guest virtual cpu
+ * @gra - guest real address
+ *
+ * Returns the guest absolute address that corresponds to the passed guest real
+ * address @gra of a virtual guest cpu by applying its prefix.
+ */
+static inline unsigned long kvm_s390_real_to_abs(struct kvm_vcpu *vcpu,
+ unsigned long gra)
+{
+ return _kvm_s390_real_to_abs(kvm_s390_get_prefix(vcpu), gra);
+}
+
+/**
* kvm_s390_logical_to_effective - convert guest logical to effective address
* @vcpu: guest virtual cpu
* @ga: guest logical address
From: Fabian Vogt <[email protected]>
[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]
A short packet indicates the end of a transfer and marks the request as
complete.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index b2910bc65e51..9e102ba9cf66 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -856,12 +856,16 @@ static void fotg210_out_fifo_handler(struct fotg210_ep *ep)
{
struct fotg210_request *req = list_entry(ep->queue.next,
struct fotg210_request, queue);
+ int disgr1 = ioread32(ep->fotg210->reg + FOTG210_DISGR1);
fotg210_start_dma(ep, req);
- /* finish out transfer */
+ /* Complete the request when it's full or a short packet arrived.
+ * Like other drivers, short_not_ok isn't handled.
+ */
+
if (req->req.length == req->req.actual ||
- req->req.actual < ep->ep.maxpacket)
+ (disgr1 & DISGR1_SPK_INT(ep->epnum - 1)))
fotg210_done(ep, req, 0);
}
--
2.30.2
From: Fabian Vogt <[email protected]>
[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]
For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 76e991557116..7831c556a40b 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -348,7 +348,7 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
if (req->req.length - req->req.actual > ep->ep.maxpacket)
length = ep->ep.maxpacket;
else
- length = req->req.length;
+ length = req->req.length - req->req.actual;
}
d = dma_map_single(NULL, buffer, length,
--
2.30.2
From: Fabian Vogt <[email protected]>
[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]
Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index d0a9ce7d0635..491b04dd6db7 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1033,6 +1033,12 @@ static void fotg210_init(struct fotg210_udc *fotg210)
value &= ~DMCR_GLINT_EN;
iowrite32(value, fotg210->reg + FOTG210_DMCR);
+ /* enable only grp2 irqs we handle */
+ iowrite32(~(DISGR2_DMA_ERROR | DISGR2_RX0BYTE_INT | DISGR2_TX0BYTE_INT
+ | DISGR2_ISO_SEQ_ABORT_INT | DISGR2_ISO_SEQ_ERR_INT
+ | DISGR2_RESM_INT | DISGR2_SUSP_INT | DISGR2_USBRST_INT),
+ fotg210->reg + FOTG210_DMISGR2);
+
/* disable all fifo interrupt */
iowrite32(~(u32)0, fotg210->reg + FOTG210_DMISGR1);
--
2.30.2
From: Johan Hovold <[email protected]>
[ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/class/cdc-acm.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 8c476a785360..0478d55bd283 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -883,8 +883,6 @@ static int set_serial_info(struct acm *acm,
if ((new_serial.close_delay != old_close_delay) ||
(new_serial.closing_wait != old_closing_wait))
retval = -EPERM;
- else
- retval = -EOPNOTSUPP;
} else {
acm->port.close_delay = close_delay;
acm->port.closing_wait = closing_wait;
--
2.30.2
From: Dan Carpenter <[email protected]>
commit 260a9ad9446723d4063ed802989758852809714d upstream.
The "ext->key_len" is a u16 that comes from the user. If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.
Fixes: e0d369d1d969 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Stanislav Yakovlev <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ipw2x00/libipw_wx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ipw2x00/libipw_wx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_wx.c
@@ -649,8 +649,10 @@ int libipw_wx_set_encodeext(struct libip
}
if (ext->alg != IW_ENCODE_ALG_NONE) {
- memcpy(sec.keys[idx], ext->key, ext->key_len);
- sec.key_sizes[idx] = ext->key_len;
+ int key_len = clamp_val(ext->key_len, 0, SCM_KEY_LEN);
+
+ memcpy(sec.keys[idx], ext->key, key_len);
+ sec.key_sizes[idx] = key_len;
sec.flags |= (1 << idx);
if (ext->alg == IW_ENCODE_ALG_WEP) {
sec.encode_alg[idx] = SEC_ALG_WEP;
From: Tetsuo Handa <[email protected]>
[ Upstream commit c0070e1e60270f6a1e09442a9ab2335f3eaeaad2 ]
syzbot is reporting hung task due to flood of
tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__,
port->count);
message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from
decrementing port->count due to tty_hung_up_p() == true.
----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
int i;
int fd[10];
for (i = 0; i < 10; i++)
fd[i] = open("/dev/ttyprintk", O_WRONLY);
ioctl(fd[0], TIOCVHANGUP);
for (i = 0; i < 10; i++)
close(fd[i]);
close(open("/dev/ttyprintk", O_WRONLY));
return 0;
}
----------
When TTY hangup happens, port->count needs to be reset via
"struct tty_operations"->hangup callback.
[1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6a
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: 24b4b67d17c308aa ("add ttyprintk driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/ttyprintk.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index e265bace57d7..50031a215a66 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -166,12 +166,23 @@ static int tpk_ioctl(struct tty_struct *tty,
return 0;
}
+/*
+ * TTY operations hangup function.
+ */
+static void tpk_hangup(struct tty_struct *tty)
+{
+ struct ttyprintk_port *tpkp = tty->driver_data;
+
+ tty_port_hangup(&tpkp->port);
+}
+
static const struct tty_operations ttyprintk_ops = {
.open = tpk_open,
.close = tpk_close,
.write = tpk_write,
.write_room = tpk_write_room,
.ioctl = tpk_ioctl,
+ .hangup = tpk_hangup,
};
static struct tty_port_operations null_ops = { };
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 8938c48fa25b491842ece9eb38f0bea0fcbaca44 ]
If omap4iss_get() failed, it need return error code in iss_probe().
Fixes: 59f0ad807681 ("[media] v4l: omap4iss: Add support for OMAP4...")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/omap4iss/iss.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c
index aa76ccda5b42..130d09d28e1d 100644
--- a/drivers/staging/media/omap4iss/iss.c
+++ b/drivers/staging/media/omap4iss/iss.c
@@ -1406,8 +1406,10 @@ static int iss_probe(struct platform_device *pdev)
if (ret < 0)
goto error;
- if (!omap4iss_get(iss))
+ if (!omap4iss_get(iss)) {
+ ret = -EINVAL;
goto error;
+ }
ret = iss_reset(iss);
if (ret < 0)
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_ixp4xx_cf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index abda44183512..fb8d1f68f36f 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -169,8 +169,12 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
return -ENOMEM;
irq = platform_get_irq(pdev, 0);
- if (irq)
+ if (irq > 0)
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ else if (irq < 0)
+ return irq;
+ else
+ return -EINVAL;
/* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits;
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/sata_mv.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 5718dc94c90c..601ea2e9fcf9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4101,6 +4101,10 @@ static int mv_platform_probe(struct platform_device *pdev)
n_ports = mv_platform_data->n_ports;
irq = platform_get_irq(pdev, 0);
}
+ if (irq < 0)
+ return irq;
+ if (!irq)
+ return -EINVAL;
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ]
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/libahci_platform.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 65371e1befe8..8839ad6b73e3 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -516,11 +516,13 @@ int ahci_platform_init_host(struct platform_device *pdev,
int i, irq, n_ports, rc;
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
if (irq != -EPROBE_DEFER)
dev_err(dev, "no irq\n");
return irq;
}
+ if (!irq)
+ return -EINVAL;
hpriv->irq = irq;
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit b66accaab3791e15ac99c92f236d0d3a6d5bd64e ]
adf_vf_isr_resource_alloc() is not unwinding correctly when error
happens and it want to release uninitialized resources.
To fix this, only release initialized resources.
[ 1.792845] Trying to free already-free IRQ 11
[ 1.793091] WARNING: CPU: 0 PID: 182 at kernel/irq/manage.c:1821 free_irq+0x202/0x380
[ 1.801340] Call Trace:
[ 1.801477] adf_vf_isr_resource_free+0x32/0xb0 [intel_qat]
[ 1.801785] adf_vf_isr_resource_alloc+0x14d/0x150 [intel_qat]
[ 1.802105] adf_dev_init+0xba/0x140 [intel_qat]
Signed-off-by: Tong Zhang <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Fixes: dd0f368398ea ("crypto: qat - Add qat dh895xcc VF driver")
Acked-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_dh895xccvf/adf_isr.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/qat/qat_dh895xccvf/adf_isr.c b/drivers/crypto/qat/qat_dh895xccvf/adf_isr.c
index 87c5d8adb125..32f9c2b79681 100644
--- a/drivers/crypto/qat/qat_dh895xccvf/adf_isr.c
+++ b/drivers/crypto/qat/qat_dh895xccvf/adf_isr.c
@@ -243,16 +243,25 @@ int adf_vf_isr_resource_alloc(struct adf_accel_dev *accel_dev)
goto err_out;
if (adf_setup_pf2vf_bh(accel_dev))
- goto err_out;
+ goto err_disable_msi;
if (adf_setup_bh(accel_dev))
- goto err_out;
+ goto err_cleanup_pf2vf_bh;
if (adf_request_msi_irq(accel_dev))
- goto err_out;
+ goto err_cleanup_bh;
return 0;
+
+err_cleanup_bh:
+ adf_cleanup_bh(accel_dev);
+
+err_cleanup_pf2vf_bh:
+ adf_cleanup_pf2vf_bh(accel_dev);
+
+err_disable_msi:
+ adf_disable_msi(accel_dev);
+
err_out:
- adf_vf_isr_resource_free(accel_dev);
return -EFAULT;
}
--
2.30.2
From: Arnd Bergmann <[email protected]>
[ Upstream commit 5b11c9d80bde81f6896cc85b23aeaa9502a704ed ]
An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in
the declaration, but now gcc-11 warns about this:
drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=]
1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN],
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33:
include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
| ~~~~~~~~~~~~~~^~~~~
Change the type back to what the function definition uses.
Link: https://lore.kernel.org/r/[email protected]
Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/scsi/libfcoe.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index e59180264591..004bf0ca8884 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -256,7 +256,7 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
struct fc_frame *);
/* libfcoe funcs */
-u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
+u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *,
const struct libfc_function_template *, int init_fcp);
u32 fcoe_fc_crc(struct fc_frame *fp);
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit e004c3e67b6459c99285b18366a71af467d869f5 ]
Currently the array gpmc_cs is indexed by cs before it cs is range checked
and the pointer read from this out-of-index read is dereferenced. Fix this
by performing the range check on cs before the read and the following
pointer dereference.
Addresses-Coverity: ("Negative array index read")
Fixes: 9ed7a776eb50 ("ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/omap-gpmc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index af187c91fc33..f6d06d894538 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1005,8 +1005,8 @@ EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
- struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
- struct resource *res = &gpmc->mem;
+ struct gpmc_cs_data *gpmc;
+ struct resource *res;
spin_lock(&gpmc_mem_lock);
if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
@@ -1015,6 +1015,9 @@ void gpmc_cs_free(int cs)
spin_unlock(&gpmc_mem_lock);
return;
}
+ gpmc = &gpmc_cs[cs];
+ res = &gpmc->mem;
+
gpmc_cs_disable_mem(cs);
if (res->flags)
release_resource(res);
--
2.30.2
From: Johannes Berg <[email protected]>
commit 010bfbe768f7ecc876ffba92db30432de4997e2a upstream.
If we overflow the maximum number of BSS entries and free the
new entry, drop it from any hidden_list that it may have been
added to in the code above or in cfg80211_combine_bsses().
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210416094212.5de7d1676ad7.Ied283b0bc5f504845e7d6ab90626bdfa68bb3dc0@changeid
Cc: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/scan.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -954,6 +954,8 @@ cfg80211_bss_update(struct cfg80211_regi
if (rdev->bss_entries >= bss_entries_limit &&
!cfg80211_bss_expire_oldest(rdev)) {
+ if (!list_empty(&new->hidden_list))
+ list_del(&new->hidden_list);
kfree(new);
goto drop;
}
From: Andy Shevchenko <[email protected]>
[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]
DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:
DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]
Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/pch_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 152c2ee0ca50..5301de1c5d31 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -3003,7 +3003,7 @@ static int init_dma_pools(struct pch_udc_dev *dev)
dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf,
UDC_EP0OUT_BUFF_SIZE * 4,
DMA_FROM_DEVICE);
- return 0;
+ return dma_mapping_error(&dev->pdev->dev, dev->dma_addr);
}
static int pch_udc_start(struct usb_gadget *g,
--
2.30.2
From: Fabian Vogt <[email protected]>
[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]
Before this, it wrote as much as available into the buffer, even if it
didn't fit.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 491b04dd6db7..b2910bc65e51 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -340,8 +340,9 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
} else {
buffer = req->req.buf + req->req.actual;
length = ioread32(ep->fotg210->reg +
- FOTG210_FIBCR(ep->epnum - 1));
- length &= FIBCR_BCFX;
+ FOTG210_FIBCR(ep->epnum - 1)) & FIBCR_BCFX;
+ if (length > req->req.length - req->req.actual)
+ length = req->req.length - req->req.actual;
}
} else {
buffer = req->req.buf + req->req.actual;
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit f9b9263a25dc3d2eaaa829e207434db6951ca7bc ]
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of riv->ieee80211->LinkDetectInfo.SlotNum
that is a u16 type. There is a potential infinite loop if SlotNum
is larger than the u8 loop counter. Fix this by making the loop
counter the same type as SlotNum.
Addresses-Coverity: ("Infinite loop")
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192u/r8192U_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 1e0d2a33787e..72dabbf19bc7 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -3418,7 +3418,7 @@ static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
u32 *TotalRxDataNum)
{
u16 SlotIndex;
- u8 i;
+ u16 i;
*TotalRxBcnNum = 0;
*TotalRxDataNum = 0;
--
2.30.2
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 83dc1173d73f80cbce2fee4d308f51f87b2f26ae ]
The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.
Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_dh895xcc/adf_isr.c | 29 ++++++++++++++++-------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/qat/qat_dh895xcc/adf_isr.c b/drivers/crypto/qat/qat_dh895xcc/adf_isr.c
index 5570f78795c1..ddbb43da1a13 100644
--- a/drivers/crypto/qat/qat_dh895xcc/adf_isr.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_isr.c
@@ -315,18 +315,31 @@ int adf_isr_resource_alloc(struct adf_accel_dev *accel_dev)
ret = adf_isr_alloc_msix_entry_table(accel_dev);
if (ret)
- return ret;
- if (adf_enable_msix(accel_dev))
goto err_out;
- if (adf_setup_bh(accel_dev))
- goto err_out;
+ ret = adf_enable_msix(accel_dev);
+ if (ret)
+ goto err_free_msix_table;
- if (adf_request_irqs(accel_dev))
- goto err_out;
+ ret = adf_setup_bh(accel_dev);
+ if (ret)
+ goto err_disable_msix;
+
+ ret = adf_request_irqs(accel_dev);
+ if (ret)
+ goto err_cleanup_bh;
return 0;
+
+err_cleanup_bh:
+ adf_cleanup_bh(accel_dev);
+
+err_disable_msix:
+ adf_disable_msix(&accel_dev->accel_pci_dev);
+
+err_free_msix_table:
+ adf_isr_free_msix_entry_table(accel_dev);
+
err_out:
- adf_isr_resource_free(accel_dev);
- return -EFAULT;
+ return ret;
}
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit f7cae626cabb3350b23722b78fe34dd7a615ca04 ]
In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().
My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.
Fixes: a672a9dc872ec ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_transport.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/qat/qat_common/adf_transport.c b/drivers/crypto/qat/qat_common/adf_transport.c
index 3865ae8d96d9..78f0942a3270 100644
--- a/drivers/crypto/qat/qat_common/adf_transport.c
+++ b/drivers/crypto/qat/qat_common/adf_transport.c
@@ -198,6 +198,7 @@ static int adf_init_ring(struct adf_etr_ring_data *ring)
dev_err(&GET_DEV(accel_dev), "Ring address not aligned\n");
dma_free_coherent(&GET_DEV(accel_dev), ring_size_bytes,
ring->base_addr, ring->dma_addr);
+ ring->base_addr = NULL;
return -EFAULT;
}
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit c7e8f404d56b99c80990b19a402c3f640d74be05 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_arasan_cf.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 80fe0f6fed29..a6b1a7556d37 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -819,12 +819,19 @@ static int arasan_cf_probe(struct platform_device *pdev)
else
quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
- /* if irq is 0, support only PIO */
- acdev->irq = platform_get_irq(pdev, 0);
- if (acdev->irq)
+ /*
+ * If there's an error getting IRQ (or we do get IRQ0),
+ * support only PIO
+ */
+ ret = platform_get_irq(pdev, 0);
+ if (ret > 0) {
+ acdev->irq = ret;
irq_handler = arasan_cf_interrupt;
- else
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+ }
acdev->pbase = res->start;
acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start,
--
2.30.2
From: Michael Walle <[email protected]>
[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]
MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.
MEMSETBADBLOCK modifies the bad block table.
Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Rafał Miłecki <[email protected]>
Acked-by: Richard Weinberger <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtdchar.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index ce87d9506f6a..0a2832782807 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -616,16 +616,12 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
case MEMGETINFO:
case MEMREADOOB:
case MEMREADOOB64:
- case MEMLOCK:
- case MEMUNLOCK:
case MEMISLOCKED:
case MEMGETOOBSEL:
case MEMGETBADBLOCK:
- case MEMSETBADBLOCK:
case OTPSELECT:
case OTPGETREGIONCOUNT:
case OTPGETREGIONINFO:
- case OTPLOCK:
case ECCGETLAYOUT:
case ECCGETSTATS:
case MTDFILEMODE:
@@ -636,9 +632,13 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
/* "dangerous" commands */
case MEMERASE:
case MEMERASE64:
+ case MEMLOCK:
+ case MEMUNLOCK:
+ case MEMSETBADBLOCK:
case MEMWRITEOOB:
case MEMWRITEOOB64:
case MEMWRITE:
+ case OTPLOCK:
if (!(file->f_mode & FMODE_WRITE))
return -EPERM;
break;
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 5cde22fcc7271812a7944c47b40100df15908358 ]
Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise
mask and the following statement should be bit-wise or'ing in the new flag
bits but instead is making a direct assignment. Fix this by using the |=
operator rather than an assignment.
Addresses-Coverity: ("Unused value")
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/vivid/vivid-vid-out.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c
index ffe5531dfc81..7f6fa77e4775 100644
--- a/drivers/media/platform/vivid/vivid-vid-out.c
+++ b/drivers/media/platform/vivid/vivid-vid-out.c
@@ -1011,7 +1011,7 @@ int vivid_vid_out_s_fbuf(struct file *file, void *fh,
return -EINVAL;
}
dev->fbuf_out_flags &= ~(chroma_flags | alpha_flags);
- dev->fbuf_out_flags = a->flags & (chroma_flags | alpha_flags);
+ dev->fbuf_out_flags |= a->flags & (chroma_flags | alpha_flags);
return 0;
}
--
2.30.2
From: Takashi Iwai <[email protected]>
commit defce244b01ee12534910a4544e11be5eb927d25 upstream.
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all. That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.
Let's unify them with the single vendor-quirk entry.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6491,8 +6491,7 @@ static const struct snd_pci_quirk alc861
SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
- SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", ALC861_FIXUP_AMP_VREF_0F),
- SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", ALC861_FIXUP_AMP_VREF_0F),
+ SND_PCI_QUIRK_VENDOR(0x1584, "Haier/Uniwill", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", ALC861_FIXUP_FSC_AMILO_PI1505),
{}
};
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/jazz_esp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 9aaa74e349cc..65f0dbfc3a45 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -170,7 +170,9 @@ static int esp_jazz_probe(struct platform_device *dev)
if (!esp->command_block)
goto fail_unmap_regs;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = err = platform_get_irq(dev, 0);
+ if (err < 0)
+ goto fail_unmap_command_block;
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
if (err < 0)
goto fail_unmap_command_block;
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 8987efbb17c2522be8615085df9a14da2ab53d34 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: c61248afa819 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 0a7f408824d8..b45ad99da8c5 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -281,7 +281,7 @@
max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ]
While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used. Use a proper
*goto* instead!
Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-sh7760.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 70e4437060d5..c836c53caa3f 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -473,7 +473,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
ret = platform_get_irq(pdev, 0);
if (ret < 0)
- return ret;
+ goto out3;
id->irq = ret;
id->adap.nr = pdev->id;
--
2.30.2
From: Xin Long <[email protected]>
commit 01bfe5e8e428b475982a98a46cca5755726f3f7f upstream.
This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b.
This one has to be reverted as it introduced a dead lock, as
syzbot reported:
CPU0 CPU1
---- ----
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1
is that of sctp_close().
The original issue this commit fixed will be fixed in the next
patch.
Reported-by: [email protected]
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1567,9 +1567,11 @@ static void sctp_close(struct sock *sk,
/* Supposedly, no process has access to the socket, but
* the net layers still may.
+ * Also, sctp_destroy_sock() needs to be called with addr_wq_lock
+ * held and that should be grabbed before socket lock.
*/
- local_bh_disable();
- bh_lock_sock(sk);
+ spin_lock_bh(&net->sctp.addr_wq_lock);
+ bh_lock_sock_nested(sk);
/* Hold the sock, since sk_common_release() will put sock_put()
* and we have just a little more cleanup.
@@ -1578,7 +1580,7 @@ static void sctp_close(struct sock *sk,
sk_common_release(sk);
bh_unlock_sock(sk);
- local_bh_enable();
+ spin_unlock_bh(&net->sctp.addr_wq_lock);
sock_put(sk);
@@ -4159,6 +4161,9 @@ static int sctp_init_sock(struct sock *s
sk_sockets_allocated_inc(sk);
sock_prot_inuse_add(net, sk->sk_prot, 1);
+ /* Nothing can fail after this block, otherwise
+ * sctp_destroy_sock() will be called without addr_wq_lock held
+ */
if (net->sctp.default_auto_asconf) {
spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
list_add_tail(&sp->auto_asconf_list,
@@ -4193,9 +4198,7 @@ static void sctp_destroy_sock(struct soc
if (sp->do_auto_asconf) {
sp->do_auto_asconf = 0;
- spin_lock_bh(&sock_net(sk)->sctp.addr_wq_lock);
list_del(&sp->auto_asconf_list);
- spin_unlock_bh(&sock_net(sk)->sctp.addr_wq_lock);
}
sctp_endpoint_free(sp->ep);
local_bh_disable();
From: Colin Ian King <[email protected]>
[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ]
The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels)
are incorrect and always lead to a zero result. The mask values are
currently the incorrect post-right shifted values, fix this by setting
them to the currect values.
(I double checked these against the TMS320TCI6482 data sheet, section
5.30, page 127 to ensure I had the correct mask values for the TXERRCH
and RXERRCH fields in the MACSTATUS register).
Addresses-Coverity: ("Operands don't affect result")
Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/davinci_emac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index e4c4747bdf32..e11f436b0726 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -183,11 +183,11 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
/* EMAC mac_status register */
#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000)
#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20)
-#define EMAC_MACSTATUS_TXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_TXERRCH_MASK (0x70000)
#define EMAC_MACSTATUS_TXERRCH_SHIFT (16)
#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000)
#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12)
-#define EMAC_MACSTATUS_RXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_RXERRCH_MASK (0x700)
#define EMAC_MACSTATUS_RXERRCH_SHIFT (8)
/* EMAC RX register masks */
--
2.30.2
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ]
When the error check in ath9k_hw_read_revisions() was added, it checked for
-EIO which is what ath9k_regread() in the ath9k_htc driver uses. However,
for plain ath9k, the register read function uses ioread32(), which just
returns -1 on error. So if such a read fails, it still gets passed through
and ends up as a weird mac revision in the log output.
Fix this by changing ath9k_regread() to return -1 on error like ioread32()
does, and fix the error check to look for that instead of -EIO.
Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register")
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Reviewed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 3932e3d14f3d..379e843fbe0d 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -246,7 +246,7 @@ static unsigned int ath9k_regread(void *hw_priv, u32 reg_offset)
if (unlikely(r)) {
ath_dbg(common, WMI, "REGISTER READ FAILED: (0x%04x, %d)\n",
reg_offset, r);
- return -EIO;
+ return -1;
}
return be32_to_cpu(val);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index d50e2e8bd998..25c3e5d3fe62 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -285,7 +285,7 @@ static bool ath9k_hw_read_revisions(struct ath_hw *ah)
srev = REG_READ(ah, AR_SREV);
- if (srev == -EIO) {
+ if (srev == -1) {
ath_err(ath9k_hw_common(ah),
"Failed to read SREV register");
return false;
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ]
rme9652 wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device
[ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.759968] Call Trace:
[ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652]
[ 1.760434] release_card_device+0x4b/0x80 [snd]
[ 1.760679] device_release+0x3b/0xa0
[ 1.760874] kobject_put+0x94/0x1b0
[ 1.761059] put_device+0x13/0x20
[ 1.761235] snd_card_free+0x61/0x90 [snd]
[ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/rme9652.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index c253bdf92e36..e5611ee9f2ae 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -1761,7 +1761,8 @@ static int snd_rme9652_free(struct snd_rme9652 *rme9652)
if (rme9652->port)
pci_release_regions(rme9652->pci);
- pci_disable_device(rme9652->pci);
+ if (pci_is_enabled(rme9652->pci))
+ pci_disable_device(rme9652->pci);
return 0;
}
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ]
hdsp wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device
[ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.766985] Call Trace:
[ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp]
[ 1.767388] release_card_device+0x4b/0x80 [snd]
[ 1.767639] device_release+0x3b/0xa0
[ 1.767838] kobject_put+0x94/0x1b0
[ 1.768027] put_device+0x13/0x20
[ 1.768207] snd_card_free+0x61/0x90 [snd]
[ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdsp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index dd6c9e6a1d53..4128c04fbfde 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -5314,7 +5314,8 @@ static int snd_hdsp_free(struct hdsp *hdsp)
if (hdsp->port)
pci_release_regions(hdsp->pci);
- pci_disable_device(hdsp->pci);
+ if (pci_is_enabled(hdsp->pci))
+ pci_disable_device(hdsp->pci);
return 0;
}
--
2.30.2
From: Xin Long <[email protected]>
commit 34e5b01186858b36c4d7c87e1a025071e8e2401f upstream.
As Or Cohen described:
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.
This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
attached to BPF_CGROUP_INET_SOCK_CREATE which denies
creation of the sctp socket.
This patch is to fix it by moving the auto_asconf init out of
sctp_init_sock(), by which inet_create()/inet6_create() won't
need to operate it in sctp_destroy_sock() when calling
sk_common_release().
It also makes more sense to do auto_asconf init while binding the
first addr, as auto_asconf actually requires an ANY addr bind,
see it in sctp_addr_wq_timeout_handler().
This addresses CVE-2021-23133.
Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications")
Reported-by: Or Cohen <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -352,6 +352,18 @@ static struct sctp_af *sctp_sockaddr_af(
return af;
}
+static void sctp_auto_asconf_init(struct sctp_sock *sp)
+{
+ struct net *net = sock_net(&sp->inet.sk);
+
+ if (net->sctp.default_auto_asconf) {
+ spin_lock(&net->sctp.addr_wq_lock);
+ list_add_tail(&sp->auto_asconf_list, &net->sctp.auto_asconf_splist);
+ spin_unlock(&net->sctp.addr_wq_lock);
+ sp->do_auto_asconf = 1;
+ }
+}
+
/* Bind a local address either to an endpoint or to an association. */
static int sctp_do_bind(struct sock *sk, union sctp_addr *addr, int len)
{
@@ -414,8 +426,10 @@ static int sctp_do_bind(struct sock *sk,
}
/* Refresh ephemeral port. */
- if (!bp->port)
+ if (!bp->port) {
bp->port = inet_sk(sk)->inet_num;
+ sctp_auto_asconf_init(sp);
+ }
/* Add the address to the bind address list.
* Use GFP_ATOMIC since BHs will be disabled.
@@ -4161,19 +4175,6 @@ static int sctp_init_sock(struct sock *s
sk_sockets_allocated_inc(sk);
sock_prot_inuse_add(net, sk->sk_prot, 1);
- /* Nothing can fail after this block, otherwise
- * sctp_destroy_sock() will be called without addr_wq_lock held
- */
- if (net->sctp.default_auto_asconf) {
- spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
- list_add_tail(&sp->auto_asconf_list,
- &net->sctp.auto_asconf_splist);
- sp->do_auto_asconf = 1;
- spin_unlock(&sock_net(sk)->sctp.addr_wq_lock);
- } else {
- sp->do_auto_asconf = 0;
- }
-
local_bh_enable();
return 0;
@@ -7337,6 +7338,8 @@ static void sctp_sock_migrate(struct soc
sctp_bind_addr_dup(&newsp->ep->base.bind_addr,
&oldsp->ep->base.bind_addr, GFP_KERNEL);
+ sctp_auto_asconf_init(newsp);
+
/* Move any messages in the old socket's receive queue that are for the
* peeled off association to the new socket's receive queue.
*/
From: Jonathan McDowell <[email protected]>
[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]
Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver. This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.
(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)
Signed-off-by: Jonathan McDowell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index ee5a7c05a0e6..f1eb9f99076a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -361,6 +361,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
plat_dat->multicast_filter_bins = 0;
+ plat_dat->tx_fifo_size = 8192;
+ plat_dat->rx_fifo_size = 8192;
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit b27dadecdf9102838331b9a0b41ffc1cfe288154 ]
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <[email protected]>
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3a510f4a6b68..7e62572215ce 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -350,6 +350,7 @@ config STRICT_DEVMEM
config FAIL_IOMMU
bool "Fault-injection capability for IOMMU"
depends on FAULT_INJECTION
+ depends on PCI || IBMVIO
help
Provide fault-injection capability for IOMMU. Each device can
be selectively enabled via the fail_iommu property.
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ]
There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
Reported-by: coverity-bot <[email protected]>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/card.c | 14 +++++++-------
sound/usb/quirks.c | 16 ++++++++++++----
sound/usb/usbaudio.h | 2 ++
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 61d303f4283d..3ded5fe94cea 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -179,9 +179,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
ctrlif, interface);
return -EINVAL;
}
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
-
- return 0;
+ return usb_driver_claim_interface(&usb_audio_driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
}
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
@@ -201,7 +200,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
if (! snd_usb_parse_audio_interface(chip, interface)) {
usb_set_interface(dev, interface, 0); /* reset the current interface */
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
+ return usb_driver_claim_interface(&usb_audio_driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
}
return 0;
@@ -610,7 +610,7 @@ static void usb_audio_disconnect(struct usb_interface *intf)
struct snd_card *card;
struct list_head *p;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return;
card = chip->card;
@@ -710,7 +710,7 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
struct usb_mixer_interface *mixer;
struct list_head *p;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return 0;
if (!chip->num_suspended_intf++) {
@@ -740,7 +740,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
struct list_head *p;
int err = 0;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return 0;
atomic_inc(&chip->active); /* avoid autopm */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index cd615514a5ff..7979a9e19c53 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -66,8 +66,12 @@ static int create_composite_quirk(struct snd_usb_audio *chip,
if (!iface)
continue;
if (quirk->ifnum != probed_ifnum &&
- !usb_interface_claimed(iface))
- usb_driver_claim_interface(driver, iface, (void *)-1L);
+ !usb_interface_claimed(iface)) {
+ err = usb_driver_claim_interface(driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
+ if (err < 0)
+ return err;
+ }
}
return 0;
@@ -399,8 +403,12 @@ static int create_autodetect_quirks(struct snd_usb_audio *chip,
continue;
err = create_autodetect_quirk(chip, iface, driver);
- if (err >= 0)
- usb_driver_claim_interface(driver, iface, (void *)-1L);
+ if (err >= 0) {
+ err = usb_driver_claim_interface(driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
+ if (err < 0)
+ return err;
+ }
}
return 0;
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index c5338be3aa37..09ecc7afdc4f 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -62,6 +62,8 @@ struct snd_usb_audio {
struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
+#define USB_AUDIO_IFACE_UNUSED ((void *)-1L)
+
#define usb_audio_err(chip, fmt, args...) \
dev_err(&(chip)->dev->dev, fmt, ##args)
#define usb_audio_warn(chip, fmt, args...) \
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 31d82c2c787d5cf65fedd35ebbc0c1bd95c1a679 ]
When vzalloc() returns NULL to sha_regions, no error return code of
kexec_calculate_store_digests() is assigned. To fix this bug, ret is
assigned with -ENOMEM in this case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a43cac0d9dc2 ("kexec: split kexec_file syscall code to kexec_file.c")
Signed-off-by: Jia-Ju Bai <[email protected]>
Reported-by: TOTE Robot <[email protected]>
Acked-by: Baoquan He <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kexec_file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 6030efd4a188..1210cd6bcaa6 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -575,8 +575,10 @@ static int kexec_calculate_store_digests(struct kimage *image)
sha_region_sz = KEXEC_SEGMENT_MAX * sizeof(struct kexec_sha_region);
sha_regions = vzalloc(sha_region_sz);
- if (!sha_regions)
+ if (!sha_regions) {
+ ret = -ENOMEM;
goto out_free_desc;
+ }
desc->tfm = tfm;
desc->flags = 0;
--
2.30.2
From: Nathan Chancellor <[email protected]>
[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/prom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 04a27307a2c4..77690c7f2671 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -258,7 +258,7 @@ static struct feature_property {
};
#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
-static inline void identical_pvr_fixup(unsigned long node)
+static __init void identical_pvr_fixup(unsigned long node)
{
unsigned int pvr;
const char *model = of_get_flat_dt_prop(node, "model", NULL);
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ]
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.
However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.
I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.
This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_statefuns.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index a9a72f7e0cd7..a9ba6f2bb8c8 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1851,7 +1851,8 @@ static sctp_disposition_t sctp_sf_do_dupcook_b(struct net *net,
sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
SCTP_STATE(SCTP_STATE_ESTABLISHED));
- SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
+ if (asoc->state < SCTP_STATE_ESTABLISHED)
+ SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMERS_START, SCTP_NULL());
repl = sctp_make_cookie_ack(new_asoc, chunk);
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit 92c48950b43f4a767388cf87709d8687151a641f ]
This patch fixes the following message which randomly pops up during
glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/debug_fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index eea64912c9c0..3b79c0284a30 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -545,6 +545,7 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
if (bucket >= ls->ls_rsbtbl_size) {
kfree(ri);
+ ++*pos;
return NULL;
}
tree = toss ? &ls->ls_rsbtbl[bucket].toss : &ls->ls_rsbtbl[bucket].keep;
--
2.30.2
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 73f5c88f521a630ea1628beb9c2d48a2e777a419 ]
Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.
Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 7f1a0fb8c493..31cc6f3d992d 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -168,7 +168,10 @@ static loff_t _nfs42_proc_llseek(struct file *filep, loff_t offset, int whence)
if (status)
return status;
- return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
+ if (whence == SEEK_DATA && res.sr_eof)
+ return -NFS4ERR_NXIO;
+ else
+ return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
}
loff_t nfs42_proc_llseek(struct file *filep, loff_t offset, int whence)
--
2.30.2
From: Phillip Lougher <[email protected]>
commit d6e621de1fceb3b098ebf435ef7ea91ec4838a1a upstream.
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Phillip Lougher <[email protected]>
Reported-by: <[email protected]>
Reported-by: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/squashfs/file.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/squashfs/file.c
+++ b/fs/squashfs/file.c
@@ -224,11 +224,11 @@ failure:
* If the skip factor is limited in this way then the file will use multiple
* slots.
*/
-static inline int calculate_skip(int blocks)
+static inline int calculate_skip(u64 blocks)
{
- int skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
+ u64 skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
* SQUASHFS_META_INDEXES);
- return min(SQUASHFS_CACHED_BLKS - 1, skip + 1);
+ return min((u64) SQUASHFS_CACHED_BLKS - 1, skip + 1);
}
From: Chunfeng Yun <[email protected]>
commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.
This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.
CC: <[email protected]>
Reported-by: Tianping Fang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3430,9 +3430,6 @@ int usb_port_resume(struct usb_device *u
* sequence.
*/
status = hub_port_status(hub, port1, &portstatus, &portchange);
-
- /* TRSMRCY = 10 msec */
- msleep(10);
}
SuspendCleared:
@@ -3447,6 +3444,9 @@ int usb_port_resume(struct usb_device *u
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_SUSPEND);
}
+
+ /* TRSMRCY = 10 msec */
+ msleep(10);
}
if (udev->persist_enabled && hub_is_superspeed(hub->hdev))
From: Johannes Berg <[email protected]>
[ Upstream commit db878e27a98106a70315d264cc92230d84009e72 ]
If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning. Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.
Fixes: 2475b1cc0d52 ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 2357b17254e7..871931577ef4 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1019,8 +1019,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (local->hw.wiphy->max_scan_ie_len)
local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
- WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
- local->hw.n_cipher_schemes));
+ if (WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
+ local->hw.n_cipher_schemes))) {
+ result = -EINVAL;
+ goto fail_workqueue;
+ }
result = ieee80211_init_cipher_suites(local);
if (result < 0)
--
2.30.2
From: Mihai Moldovan <[email protected]>
[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kconfig/nconf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index f7049e288e93..c58a46904861 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -502,8 +502,8 @@ static int get_mext_match(const char *match_str, match_f flag)
else if (flag == FIND_NEXT_MATCH_UP)
--match_start;
+ match_start = (match_start + items_num) % items_num;
index = match_start;
- index = (index + items_num) % items_num;
while (true) {
char *str = k_menu_items[index].str;
if (strcasestr(str, match_str) != 0)
--
2.30.2
From: Arnd Bergmann <[email protected]>
commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream.
gcc-11 now warns about a confusingly indented code block:
drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’:
drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
| ^~
drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
1295 | break;
Rewrite this to use a single if() block with the __is_defined() macro.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/sl811-hcd.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1286,11 +1286,10 @@ sl811h_hub_control(
goto error;
put_unaligned_le32(sl811->port1, buf);
-#ifndef VERBOSE
- if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
-#endif
- dev_dbg(hcd->self.controller, "GetPortStatus %08x\n",
- sl811->port1);
+ if (__is_defined(VERBOSE) ||
+ *(u16*)(buf+2)) /* only if wPortChange is interesting */
+ dev_dbg(hcd->self.controller, "GetPortStatus %08x\n",
+ sl811->port1);
break;
case SetPortFeature:
if (wIndex != 1 || wLength != 0)
From: Vineet Gupta <[email protected]>
commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream.
We have NR_syscall syscalls from [0 .. NR_syscall-1].
However the check for invalid syscall number is "> NR_syscall" as
opposed to >=. This off-by-one error erronesously allows "NR_syscall"
to be treated as valid syscall causeing out-of-bounds access into
syscall-call table ensuing a crash (holes within syscall table have a
invalid-entry handler but this is beyond the array implementing the
table).
This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10
kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has
NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was
not handled as -ENOSYS but processed leading to a crash.
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48
Reported-by: Shahab Vahedi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/entry.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -181,7 +181,7 @@ tracesys:
; Do the Sys Call as we normally would.
; Validate the Sys Call number
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi tracesys_exit
@@ -264,7 +264,7 @@ ENTRY(EV_Trap)
;============ Normal syscall case
; syscall num shd not exceed the total system calls avail
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi ret_from_system_call
From: Christophe JAILLET <[email protected]>
[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ]
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.
So remove simplify the first error message.
While at it, also remove the useless initialization of 'retval'.
Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/fotg210-hcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 11b3a8c57eab..5dacc3076efd 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5610,7 +5610,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct resource *res;
int irq;
- int retval = -ENODEV;
+ int retval;
struct fotg210_hcd *fotg210;
if (usb_disabled())
@@ -5630,7 +5630,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
hcd = usb_create_hcd(&fotg210_fotg210_hc_driver, dev,
dev_name(dev));
if (!hcd) {
- dev_err(dev, "failed to create hcd with err %d\n", retval);
+ dev_err(dev, "failed to create hcd\n");
retval = -ENOMEM;
goto fail_create_hcd;
}
--
2.30.2
From: Hui Wang <[email protected]>
[ Upstream commit f48652bbe3ae62ba2835a396b7e01f063e51c4cd ]
Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
BugLink: http://bugs.launchpad.net/bugs/804178
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_generic.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -1182,11 +1182,17 @@ static const char *get_line_out_pfx(stru
*index = ch;
return "Headphone";
case AUTO_PIN_LINE_OUT:
- /* This deals with the case where we have two DACs and
- * one LO, one HP and one Speaker */
- if (!ch && cfg->speaker_outs && cfg->hp_outs) {
- bool hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
- bool spk_lo_shared = !path_has_mixer(codec, spec->speaker_paths[0], ctl_type);
+ /* This deals with the case where one HP or one Speaker or
+ * one HP + one Speaker need to share the DAC with LO
+ */
+ if (!ch) {
+ bool hp_lo_shared = false, spk_lo_shared = false;
+
+ if (cfg->speaker_outs)
+ spk_lo_shared = !path_has_mixer(codec,
+ spec->speaker_paths[0], ctl_type);
+ if (cfg->hp_outs)
+ hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type);
if (hp_lo_shared && spk_lo_shared)
return spec->vmaster_mute.hook ? "PCM" : "Master";
if (hp_lo_shared)
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_make_chunk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index e3e44237de1c..9de03d2e5da9 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3119,7 +3119,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
* primary.
*/
if (af->is_any(&addr))
- memcpy(&addr.v4, sctp_source(asconf), sizeof(addr));
+ memcpy(&addr, sctp_source(asconf), sizeof(addr));
peer = sctp_assoc_lookup_paddr(asoc, &addr);
if (!peer)
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 594b27e677b35f9734b1969d175ebc6146741109 upstream.
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes: 16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6016,6 +6016,7 @@ void kvm_arch_exit(void)
unregister_hotcpu_notifier(&kvmclock_cpu_notifier_block);
#ifdef CONFIG_X86_64
pvclock_gtod_unregister_notifier(&pvclock_gtod_notifier);
+ cancel_work_sync(&pvclock_gtod_work);
#endif
kvm_x86_ops = NULL;
kvm_mmu_module_exit();
From: Arnd Bergmann <[email protected]>
commit 40cc3a80bb42587db1e6ae21d6f3090582d33e89 upstream.
gcc-11 starts warning about misleading indentation inside of macros:
drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’:
drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
103 | if (verbose > 1) \
| ^~
drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’
200 | v2printk("kgdbts: breakpoint complete\n");
| ^~~~~~~~
drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
105 | touch_nmi_watchdog(); \
| ^~~~~~~~~~~~~~~~~~
The code looks correct to me, so just reindent it for readability.
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Acked-by: Daniel Thompson <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/kgdbts.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -105,19 +105,19 @@
#include <linux/module.h>
#include <asm/sections.h>
-#define v1printk(a...) do { \
- if (verbose) \
- printk(KERN_INFO a); \
- } while (0)
-#define v2printk(a...) do { \
- if (verbose > 1) \
- printk(KERN_INFO a); \
- touch_nmi_watchdog(); \
- } while (0)
-#define eprintk(a...) do { \
- printk(KERN_ERR a); \
- WARN_ON(1); \
- } while (0)
+#define v1printk(a...) do { \
+ if (verbose) \
+ printk(KERN_INFO a); \
+} while (0)
+#define v2printk(a...) do { \
+ if (verbose > 1) \
+ printk(KERN_INFO a); \
+ touch_nmi_watchdog(); \
+} while (0)
+#define eprintk(a...) do { \
+ printk(KERN_ERR a); \
+ WARN_ON(1); \
+} while (0)
#define MAX_CONFIG_LEN 40
static struct kgdb_io kgdbts_io_ops;
From: Arnd Bergmann <[email protected]>
commit 396a66aa1172ef2b78c21651f59b40b87b2e5e1e upstream.
gcc-11 warns about mismatched prototypes here:
arch/x86/lib/msr-smp.c:255:51: error: argument 2 of type ‘u32 *’ {aka ‘unsigned int *’} declared as a pointer [-Werror=array-parameter=]
255 | int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
| ~~~~~^~~~
arch/x86/include/asm/msr.h:347:50: note: previously declared as an array ‘u32[8]’ {aka ‘unsigned int[8]’}
GCC is right here - fix up the types.
[ mingo: Twiddled the changelog. ]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/lib/msr-smp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/lib/msr-smp.c
+++ b/arch/x86/lib/msr-smp.c
@@ -239,7 +239,7 @@ static void __wrmsr_safe_regs_on_cpu(voi
rv->err = wrmsr_safe_regs(rv->regs);
}
-int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
{
int err;
struct msr_regs_info rv;
@@ -252,7 +252,7 @@ int rdmsr_safe_regs_on_cpu(unsigned int
}
EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu);
-int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
{
int err;
struct msr_regs_info rv;
On Thu, 20 May 2021 at 17:12, Guenter Roeck <[email protected]> wrote:
>
> On 5/20/21 2:21 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.269 release.
> > There are 190 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 22 May 2021 09:20:38 +0000.
> > Anything received after that time might be too late.
> >
>
> All mips builds still fail.
>
> Building mips:defconfig ... failed
> --------------
> Error log:
> In file included from include/linux/kernel.h:136,
> from include/asm-generic/bug.h:13,
> from arch/mips/include/asm/bug.h:41,
> from include/linux/bug.h:4,
> from include/linux/page-flags.h:9,
> from kernel/bounds.c:9:
> arch/mips/include/asm/div64.h:59:30: error: expected identifier or '(' before '{' token
> 59 | #define __div64_32(n, base) ({ \
> | ^
> include/asm-generic/div64.h:35:17: note: in expansion of macro '__div64_32'
> 35 | extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
> | ^~~~~~~~~~
>
> It looks like the changes conflict with the code in include/asm-generic/div64.h.
> That code is completely different in later kernel versions.
LKFT build system also found these MIPS builds failed.
- Naresh
From: Seunghui Lee <[email protected]>
commit 917a5336f2c27928be270226ab374ed0cbf3805d upstream.
Some of SD cards sets permanent write protection bit in their CSD register,
due to lifespan or internal problem. To avoid unnecessary I/O write
operations, let's parse the bits in the CSD during initialization and mark
the card as read only for this case.
Signed-off-by: Seunghui Lee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/sd.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -138,6 +138,9 @@ static int mmc_decode_csd(struct mmc_car
csd->erase_size = UNSTUFF_BITS(resp, 39, 7) + 1;
csd->erase_size <<= csd->write_blkbits - 9;
}
+
+ if (UNSTUFF_BITS(resp, 13, 1))
+ mmc_card_set_readonly(card);
break;
case 1:
/*
@@ -172,6 +175,9 @@ static int mmc_decode_csd(struct mmc_car
csd->write_blkbits = 9;
csd->write_partial = 0;
csd->erase_size = 1;
+
+ if (UNSTUFF_BITS(resp, 13, 1))
+ mmc_card_set_readonly(card);
break;
default:
pr_err("%s: unrecognised CSD structure version %d\n",
From: Wei Yongjun <[email protected]>
[ Upstream commit a23faea76d4cf5f75decb574491e66f9ecd707e7 ]
Call spi_master_get() holds the reference count to master device, thus
we need an additional spi_master_put() call to reduce the reference
count, otherwise we will leak a reference to master.
This commit fix it by removing the unnecessary spi_master_get().
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-omap-100k.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index 76a8425be227..1eccdc4a4581 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -435,7 +435,7 @@ err:
static int omap1_spi100k_remove(struct platform_device *pdev)
{
- struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+ struct spi_master *master = platform_get_drvdata(pdev);
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
pm_runtime_disable(&pdev->dev);
@@ -449,7 +449,7 @@ static int omap1_spi100k_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int omap1_spi100k_runtime_suspend(struct device *dev)
{
- struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+ struct spi_master *master = dev_get_drvdata(dev);
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
clk_disable_unprepare(spi100k->ick);
@@ -460,7 +460,7 @@ static int omap1_spi100k_runtime_suspend(struct device *dev)
static int omap1_spi100k_runtime_resume(struct device *dev)
{
- struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+ struct spi_master *master = dev_get_drvdata(dev);
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
int ret;
--
2.30.2
From: Phillip Potter <[email protected]>
commit bd78980be1a68d14524c51c4b4170782fada622b upstream.
Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and
also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug
reported by syzbot at:
https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa
Reported-by: [email protected]
Signed-off-by: Phillip Potter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/ax88179_178a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -307,12 +307,12 @@ static int ax88179_read_cmd(struct usbne
int ret;
if (2 == size) {
- u16 buf;
+ u16 buf = 0;
ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
le16_to_cpus(&buf);
*((u16 *)data) = buf;
} else if (4 == size) {
- u32 buf;
+ u32 buf = 0;
ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
le32_to_cpus(&buf);
*((u32 *)data) = buf;
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit fd48c056a32ed6e7754c7c475490f3bed54ed378 ]
This fixes a compilation warning in pscsi_complete_cmd():
drivers/target/target_core_pscsi.c: In function ‘pscsi_complete_cmd’:
drivers/target/target_core_pscsi.c:624:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_pscsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index d72a4058fd08..0ce3697ecbd7 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -629,8 +629,9 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
unsigned char *buf;
buf = transport_kmap_data_sg(cmd);
- if (!buf)
+ if (!buf) {
; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
+ }
if (cdb[0] == MODE_SENSE_10) {
if (!(buf[3] & 0x80))
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 657d4d1934f75a2d978c3cf2086495eaa542e7a9 ]
There is an error return path that is not kfree'ing socfpga_clk leading
to a memory leak. Fix this by adding in the missing kfree call.
Addresses-Coverity: ("Resource leak")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Dinh Nguyen <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/socfpga/clk-gate-a10.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/socfpga/clk-gate-a10.c b/drivers/clk/socfpga/clk-gate-a10.c
index 1cebf253e8fd..48e371035a63 100644
--- a/drivers/clk/socfpga/clk-gate-a10.c
+++ b/drivers/clk/socfpga/clk-gate-a10.c
@@ -158,6 +158,7 @@ static void __init __socfpga_gate_init(struct device_node *node,
if (IS_ERR(socfpga_clk->sys_mgr_base_addr)) {
pr_err("%s: failed to find altr,sys-mgr regmap!\n",
__func__);
+ kfree(socfpga_clk);
return;
}
}
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit b6cfa007b3b229771d9588970adb4ab3e0487f49 ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/generic-adc-battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/generic-adc-battery.c
index fedc5818fab7..86289f9da85a 100644
--- a/drivers/power/generic-adc-battery.c
+++ b/drivers/power/generic-adc-battery.c
@@ -379,7 +379,7 @@ static int gab_remove(struct platform_device *pdev)
}
kfree(adc_bat->psy_desc.properties);
- cancel_delayed_work(&adc_bat->bat_work);
+ cancel_delayed_work_sync(&adc_bat->bat_work);
return 0;
}
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit b7cd0da982e3043f2eec7235ac5530cb18d6af1d ]
syzbot reported memory leak in dvb-usb. The problem was
in invalid error handling in dvb_usb_adapter_init().
for (n = 0; n < d->props.num_adapters; n++) {
....
if ((ret = dvb_usb_adapter_stream_init(adap)) ||
(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
(ret = dvb_usb_adapter_frontend_init(adap))) {
return ret;
}
...
d->num_adapters_initialized++;
...
}
In case of error in dvb_usb_adapter_dvb_init() or
dvb_usb_adapter_dvb_init() d->num_adapters_initialized won't be
incremented, but dvb_usb_adapter_exit() relies on it:
for (n = 0; n < d->num_adapters_initialized; n++)
So, allocated objects won't be freed.
Signed-off-by: Pavel Skripkin <[email protected]>
Reported-by: [email protected]
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dvb-usb-init.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 97a89ef7e4c1..151212168c9f 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -82,11 +82,17 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
}
}
- if ((ret = dvb_usb_adapter_stream_init(adap)) ||
- (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
- (ret = dvb_usb_adapter_frontend_init(adap))) {
+ ret = dvb_usb_adapter_stream_init(adap);
+ if (ret)
return ret;
- }
+
+ ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
+ if (ret)
+ goto dvb_init_err;
+
+ ret = dvb_usb_adapter_frontend_init(adap);
+ if (ret)
+ goto frontend_init_err;
/* use exclusive FE lock if there is multiple shared FEs */
if (adap->fe_adap[1].fe)
@@ -106,6 +112,12 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
}
return 0;
+
+frontend_init_err:
+ dvb_usb_adapter_dvb_exit(adap);
+dvb_init_err:
+ dvb_usb_adapter_stream_exit(adap);
+ return ret;
}
static int dvb_usb_adapter_exit(struct dvb_usb_device *d)
--
2.30.2
From: Kai-Heng Feng <[email protected]>
commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream.
This is another branded 8153 device that doesn't work well with LPM
enabled:
[ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71
So disable LPM to resolve the issue.
Signed-off-by: Kai-Heng Feng <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/1922651
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -264,6 +264,9 @@ static const struct usb_device_id usb_qu
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */
+ { USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM },
+
/* BUILDWIN Photo Frame */
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
From: Zhang Yi <[email protected]>
commit a149d2a5cabbf6507a7832a1c4fd2593c55fd450 upstream.
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: [email protected]
Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <[email protected]>
Suggested-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ialloc.c | 48 ++++++++++++++++++++++++++++++++----------------
1 file changed, 32 insertions(+), 16 deletions(-)
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -1278,6 +1278,7 @@ int ext4_init_inode_table(struct super_b
handle_t *handle;
ext4_fsblk_t blk;
int num, ret = 0, used_blks = 0;
+ unsigned long used_inos = 0;
/* This should not happen, but just to be sure check this */
if (sb->s_flags & MS_RDONLY) {
@@ -1308,22 +1309,37 @@ int ext4_init_inode_table(struct super_b
* used inodes so we need to skip blocks with used inodes in
* inode table.
*/
- if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)))
- used_blks = DIV_ROUND_UP((EXT4_INODES_PER_GROUP(sb) -
- ext4_itable_unused_count(sb, gdp)),
- sbi->s_inodes_per_block);
-
- if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group) ||
- ((group == 0) && ((EXT4_INODES_PER_GROUP(sb) -
- ext4_itable_unused_count(sb, gdp)) <
- EXT4_FIRST_INO(sb)))) {
- ext4_error(sb, "Something is wrong with group %u: "
- "used itable blocks: %d; "
- "itable unused count: %u",
- group, used_blks,
- ext4_itable_unused_count(sb, gdp));
- ret = 1;
- goto err_out;
+ if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT))) {
+ used_inos = EXT4_INODES_PER_GROUP(sb) -
+ ext4_itable_unused_count(sb, gdp);
+ used_blks = DIV_ROUND_UP(used_inos, sbi->s_inodes_per_block);
+
+ /* Bogus inode unused count? */
+ if (used_blks < 0 || used_blks > sbi->s_itb_per_group) {
+ ext4_error(sb, "Something is wrong with group %u: "
+ "used itable blocks: %d; "
+ "itable unused count: %u",
+ group, used_blks,
+ ext4_itable_unused_count(sb, gdp));
+ ret = 1;
+ goto err_out;
+ }
+
+ used_inos += group * EXT4_INODES_PER_GROUP(sb);
+ /*
+ * Are there some uninitialized inodes in the inode table
+ * before the first normal inode?
+ */
+ if ((used_blks != sbi->s_itb_per_group) &&
+ (used_inos < EXT4_FIRST_INO(sb))) {
+ ext4_error(sb, "Something is wrong with group %u: "
+ "itable unused count: %u; "
+ "itables initialized count: %ld",
+ group, ext4_itable_unused_count(sb, gdp),
+ used_inos);
+ ret = 1;
+ goto err_out;
+ }
}
blk = ext4_inode_table(sb, gdp) + used_blks;
From: Fengnan Chang <[email protected]>
commit f88f1466e2a2e5ca17dfada436d3efa1b03a3972 upstream.
We should set the error code when ext4_commit_super check argument failed.
Found in code review.
Fixes: c4be0c1dc4cdc ("filesystem freeze: add error handling of write_super_lockfs/unlockfs").
Cc: [email protected]
Signed-off-by: Fengnan Chang <[email protected]>
Reviewed-by: Andreas Dilger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4494,8 +4494,10 @@ static int ext4_commit_super(struct supe
struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
int error = 0;
- if (!sbh || block_device_ejected(sb))
- return error;
+ if (!sbh)
+ return -EINVAL;
+ if (block_device_ejected(sb))
+ return -ENODEV;
/*
* The superblock bh should be mapped, but it might not be if the
From: Joe Thornber <[email protected]>
commit 5208692e80a1f3c8ce2063a22b675dd5589d1d80 upstream.
This division bug meant the search for free metadata space could skip
the final allocation bitmap's worth of entries. Fix affects DM thinp,
cache and era targets.
Cc: [email protected]
Signed-off-by: Joe Thornber <[email protected]>
Tested-by: Ming-Hung Tsai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/persistent-data/dm-space-map-common.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -337,6 +337,8 @@ int sm_ll_find_free_block(struct ll_disk
*/
begin = do_div(index_begin, ll->entries_per_block);
end = do_div(end, ll->entries_per_block);
+ if (end == 0)
+ end = ll->entries_per_block;
for (i = index_begin; i < index_end; i++, begin = 0) {
struct dm_block *blk;
From: Joe Thornber <[email protected]>
commit a88b2358f1da2c9f9fcc432f2e0a79617fea397c upstream.
Otherwise most non-x86 architectures (e.g. riscv, arm) will resort to
byte-by-byte access.
Cc: [email protected]
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/persistent-data/dm-btree-internal.h | 4 ++--
drivers/md/persistent-data/dm-space-map-common.h | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/md/persistent-data/dm-btree-internal.h
+++ b/drivers/md/persistent-data/dm-btree-internal.h
@@ -34,12 +34,12 @@ struct node_header {
__le32 max_entries;
__le32 value_size;
__le32 padding;
-} __packed;
+} __attribute__((packed, aligned(8)));
struct btree_node {
struct node_header header;
__le64 keys[0];
-} __packed;
+} __attribute__((packed, aligned(8)));
/*
--- a/drivers/md/persistent-data/dm-space-map-common.h
+++ b/drivers/md/persistent-data/dm-space-map-common.h
@@ -33,7 +33,7 @@ struct disk_index_entry {
__le64 blocknr;
__le32 nr_free;
__le32 none_free_before;
-} __packed;
+} __attribute__ ((packed, aligned(8)));
#define MAX_METADATA_BITMAPS 255
@@ -43,7 +43,7 @@ struct disk_metadata_index {
__le64 blocknr;
struct disk_index_entry index[MAX_METADATA_BITMAPS];
-} __packed;
+} __attribute__ ((packed, aligned(8)));
struct ll_disk;
@@ -86,7 +86,7 @@ struct disk_sm_root {
__le64 nr_allocated;
__le64 bitmap_root;
__le64 ref_count_root;
-} __packed;
+} __attribute__ ((packed, aligned(8)));
#define ENTRIES_PER_BYTE 4
@@ -94,7 +94,7 @@ struct disk_bitmap_header {
__le32 csum;
__le32 not_used;
__le64 blocknr;
-} __packed;
+} __attribute__ ((packed, aligned(8)));
enum allocation_event {
SM_NONE,
From: Dean Anderson <[email protected]>
commit 55b74ce7d2ce0b0058f3e08cab185a0afacfe39e upstream.
Fixes bug with the handling of more than one language in
the string table in f_fs.c.
str_count was not reset for subsequent language codes.
str_count-- "rolls under" and processes u32 max strings on
the processing of the second language entry.
The existing bug can be reproduced by adding a second language table
to the structure "strings" in tools/usb/ffs-test.c.
Signed-off-by: Dean Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2341,6 +2341,7 @@ static int __ffs_data_got_strings(struct
do { /* lang_count > 0 so we can use do-while */
unsigned needed = needed_count;
+ u32 str_per_lang = str_count;
if (unlikely(len < 3))
goto error_free;
@@ -2376,7 +2377,7 @@ static int __ffs_data_got_strings(struct
data += length + 1;
len -= length + 1;
- } while (--str_count);
+ } while (--str_per_lang);
s->id = 0; /* terminator */
s->s = NULL;
From: Tetsuo Handa <[email protected]>
commit 376565b9717c30cd58ad33860fa42697615fa2e4 upstream.
KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x484/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_send_datagram+0x150/0x280
vmci_dbell_register_notification_bitmap+0x133/0x1e0
vmci_guest_probe_device+0xcab/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
vmci_dbell_register_notification_bitmap+0x50/0x1e0
vmci_dbell_register_notification_bitmap+0x50/0x1e0
Bytes 28-31 of 32 are uninitialized
Memory access of size 32 starts at ffff88810098f570
=====================================================
Fixes: 83e2ec765be03e8a ("VMCI: doorbell implementation.")
Cc: <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/vmw_vmci/vmci_doorbell.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/vmw_vmci/vmci_doorbell.c
+++ b/drivers/misc/vmw_vmci/vmci_doorbell.c
@@ -334,7 +334,7 @@ int vmci_dbell_host_context_notify(u32 s
bool vmci_dbell_register_notification_bitmap(u32 bitmap_ppn)
{
int result;
- struct vmci_notify_bm_set_msg bitmap_set_msg;
+ struct vmci_notify_bm_set_msg bitmap_set_msg = { };
bitmap_set_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
VMCI_SET_NOTIFY_BITMAP);
From: Phillip Potter <[email protected]>
commit 19ab233989d0f7ab1de19a036e247afa4a0a1e9c upstream.
Use kzalloc() rather than kmalloc() for the dynamically allocated parts
of the colormap in fb_alloc_cmap_gfp, to prevent a leak of random kernel
data to userspace under certain circumstances.
Fixes a KMSAN-found infoleak bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=741578659feabd108ad9e06696f0c1f2e69c4b6e
Reported-by: [email protected]
Cc: stable <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Phillip Potter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/core/fbcmap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/video/fbdev/core/fbcmap.c
+++ b/drivers/video/fbdev/core/fbcmap.c
@@ -101,17 +101,17 @@ int fb_alloc_cmap_gfp(struct fb_cmap *cm
if (!len)
return 0;
- cmap->red = kmalloc(size, flags);
+ cmap->red = kzalloc(size, flags);
if (!cmap->red)
goto fail;
- cmap->green = kmalloc(size, flags);
+ cmap->green = kzalloc(size, flags);
if (!cmap->green)
goto fail;
- cmap->blue = kmalloc(size, flags);
+ cmap->blue = kzalloc(size, flags);
if (!cmap->blue)
goto fail;
if (transp) {
- cmap->transp = kmalloc(size, flags);
+ cmap->transp = kzalloc(size, flags);
if (!cmap->transp)
goto fail;
} else {
From: DooHyun Hwang <[email protected]>
commit 147186f531ae49c18b7a9091a2c40e83b3d95649 upstream.
A CMD11 is sent to the SD/SDIO card to start the voltage switch procedure
into 1.8V I/O. According to the SD spec a power cycle is needed of the
card, if it turns out that the CMD11 fails. Let's fix this, to allow a
retry of the initialization without the voltage switch, to succeed.
Note that, whether it makes sense to also retry with the voltage switch
after the power cycle is a bit more difficult to know. At this point, we
treat it like the CMD11 isn't supported and therefore we skip it when
retrying.
Signed-off-by: DooHyun Hwang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1593,7 +1593,7 @@ int mmc_set_signal_voltage(struct mmc_ho
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
- return err;
+ goto power_cycle;
if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
return -EIO;
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 4514d991d99211f225d83b7e640285f29f0755d0 ]
It should not be necessary to update the current_state field of
struct pci_dev in pci_enable_device_flags() before calling
do_pci_enable_device() for the device, because none of the
code between that point and the pci_set_power_state() call in
do_pci_enable_device() invoked later depends on it.
Moreover, doing that is actively harmful in some cases. For example,
if the given PCI device depends on an ACPI power resource whose _STA
method initially returns 0 ("off"), but the config space of the PCI
device is accessible and the power state retrieved from the
PCI_PM_CTRL register is D0, the current_state field in the struct
pci_dev representing that device will get out of sync with the
power.state of its ACPI companion object and that will lead to
power management issues going forward.
To avoid such issues it is better to leave the current_state value
as is until it is changed to PCI_D0 by do_pci_enable_device() as
appropriate. However, the power state of the device is not changed
to PCI_D0 if it is already enabled when pci_enable_device_flags()
gets called for it, so update its current_state in that case, but
use pci_update_current_state() covering platform PM too for that.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Maximilian Luz <[email protected]>
Tested-by: Maximilian Luz <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci.c | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b7f65fc54dc2..22e8172f373d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1328,20 +1328,10 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
int err;
int i, bars = 0;
- /*
- * Power state could be unknown at this point, either due to a fresh
- * boot or a device removal call. So get the current power state
- * so that things like MSI message writing will behave as expected
- * (e.g. if the device really is in D0 at enable time).
- */
- if (dev->pm_cap) {
- u16 pmcsr;
- pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
- dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
- }
-
- if (atomic_inc_return(&dev->enable_cnt) > 1)
+ if (atomic_inc_return(&dev->enable_cnt) > 1) {
+ pci_update_current_state(dev, dev->current_state);
return 0; /* already enabled */
+ }
bridge = pci_upstream_bridge(dev);
if (bridge)
--
2.30.2
From: Josef Bacik <[email protected]>
[ Upstream commit 7a9213a93546e7eaef90e6e153af6b8fc7553f10 ]
A few BUG_ON()'s in replace_path are purely to keep us from making
logical mistakes, so replace them with ASSERT()'s.
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/relocation.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 5681fc3976ad..628b6a046093 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1785,8 +1785,8 @@ int replace_path(struct btrfs_trans_handle *trans,
int ret;
int slot;
- BUG_ON(src->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
- BUG_ON(dest->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+ ASSERT(src->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
+ ASSERT(dest->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
last_snapshot = btrfs_root_last_snapshot(&src->root_item);
again:
@@ -1818,7 +1818,7 @@ again:
parent = eb;
while (1) {
level = btrfs_header_level(parent);
- BUG_ON(level < lowest_level);
+ ASSERT(level >= lowest_level);
ret = btrfs_bin_search(parent, &key, level, &slot);
if (ret && slot > 0)
--
2.30.2
From: Pavel Machek <[email protected]>
[ Upstream commit 18ffbc47d45a1489b664dd68fb3a7610a6e1dea3 ]
Consistently use "< ... +1" in for loops.
Fix of-by-one in for_each_set_bit().
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Link: https://lore.kernel.org/lkml/20190724095841.GA6952@amd/
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/intel_th/gth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/intel_th/gth.c b/drivers/hwtracing/intel_th/gth.c
index 189eb6269971..e585b29ce738 100644
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -485,7 +485,7 @@ static void intel_th_gth_disable(struct intel_th_device *thdev,
output->active = false;
for_each_set_bit(master, gth->output[output->port].master,
- TH_CONFIGURABLE_MASTERS) {
+ TH_CONFIGURABLE_MASTERS + 1) {
gth_master_set(gth, master, -1);
}
spin_unlock(>h->gth_lock);
@@ -597,7 +597,7 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
othdev->output.port = -1;
othdev->output.active = false;
gth->output[port].output = NULL;
- for (master = 0; master <= TH_CONFIGURABLE_MASTERS; master++)
+ for (master = 0; master < TH_CONFIGURABLE_MASTERS + 1; master++)
if (gth->master[master] == port)
gth->master[master] = -1;
spin_unlock(>h->gth_lock);
--
2.30.2
From: Sean Young <[email protected]>
[ Upstream commit 28c7afb07ccfc0a939bb06ac1e7afe669901c65a ]
It's best if this condition is reported.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/ite-cir.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 63165d324fff..7d3e50d94d86 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -292,8 +292,14 @@ static irqreturn_t ite_cir_isr(int irq, void *data)
/* read the interrupt flags */
iflags = dev->params.get_irq_causes(dev);
+ /* Check for RX overflow */
+ if (iflags & ITE_IRQ_RX_FIFO_OVERRUN) {
+ dev_warn(&dev->rdev->dev, "receive overflow\n");
+ ir_raw_event_reset(dev->rdev);
+ }
+
/* check for the receive interrupt */
- if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
+ if (iflags & ITE_IRQ_RX_FIFO) {
/* read the FIFO bytes */
rx_bytes =
dev->params.get_rx_bytes(dev, rx_buf,
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit e1723d8b87b73ab363256e7ca3af3ddb75855680 ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-twl4030-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index f96065a81d1e..168780eb29aa 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -753,7 +753,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
usb_remove_phy(&twl->phy);
pm_runtime_get_sync(twl->dev);
- cancel_delayed_work(&twl->id_workaround_work);
+ cancel_delayed_work_sync(&twl->id_workaround_work);
device_remove_file(twl->dev, &dev_attr_vbus);
/* set transceiver mode to power on defaults */
--
2.30.2
From: Jiri Kosina <[email protected]>
commit 2800aadc18a64c96b051bcb7da8a7df7d505db3f upstream.
It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs
disabled (e.g. from LED core). We can't enable BHs in such a situation.
Turn the unconditional BH-enable/BH-disable code into
hardirq-disable/conditional-enable.
This fixes the warning below.
WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0
CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
RIP: 0010:__local_bh_enable_ip+0xa5/0xf0
Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e
RSP: 0018:ffffafd580b13298 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389
RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000
R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000
R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001
FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0
Call Trace:
? _raw_spin_unlock_bh+0x1f/0x30
iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi]
iwl_trans_send_cmd+0x88/0x170 [iwlwifi]
? lock_acquire+0x277/0x3d0
iwl_mvm_send_cmd+0x32/0x80 [iwlmvm]
iwl_mvm_led_set+0xc2/0xe0 [iwlmvm]
? led_trigger_event+0x46/0x70
led_trigger_event+0x46/0x70
ieee80211_do_open+0x5c5/0xa20 [mac80211]
ieee80211_open+0x67/0x90 [mac80211]
__dev_open+0xd4/0x150
__dev_change_flags+0x19e/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x30d/0x1230
? lock_is_held_type+0xb4/0x120
? __nla_validate_parse.part.7+0x57/0xcb0
? __lock_acquire+0x2e1/0x1a50
__rtnl_newlink+0x560/0x910
? __lock_acquire+0x2e1/0x1a50
? __lock_acquire+0x2e1/0x1a50
? lock_acquire+0x277/0x3d0
? sock_def_readable+0x5/0x290
? lock_is_held_type+0xb4/0x120
? find_held_lock+0x2d/0x90
? sock_def_readable+0xb3/0x290
? lock_release+0x166/0x2a0
? lock_is_held_type+0x90/0x120
rtnl_newlink+0x47/0x70
rtnetlink_rcv_msg+0x25c/0x470
? netlink_deliver_tap+0x97/0x3e0
? validate_linkmsg+0x350/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x336/0x450
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ed/0x250
? copy_msghdr_from_user+0x5c/0x90
___sys_sendmsg+0x88/0xd0
? lock_is_held_type+0xb4/0x120
? find_held_lock+0x2d/0x90
? lock_release+0x166/0x2a0
? __fget_files+0xfe/0x1d0
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
? lockdep_hardirqs_on_prepare+0xd9/0x170
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc605c9572d
Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48
RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d
RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c
RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000
irq event stamp: 170785
hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0
hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90
softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi]
Signed-off-by: Jiri Kosina <[email protected]>
Tested-by: Sedat Dilek <[email protected]> # LLVM/Clang v12.0.0-rc3
Acked-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jari Ruusu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/iwlwifi/pcie/tx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1341,6 +1341,7 @@ static int iwl_pcie_enqueue_hcmd(struct
u32 cmd_pos;
const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
+ unsigned long flags2;
if (WARN(!trans_pcie->wide_cmd_header &&
group_id > IWL_ALWAYS_LONG_GROUP,
@@ -1423,10 +1424,10 @@ static int iwl_pcie_enqueue_hcmd(struct
goto free_dup_buf;
}
- spin_lock_bh(&txq->lock);
+ spin_lock_irqsave(&txq->lock, flags2);
if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
- spin_unlock_bh(&txq->lock);
+ spin_unlock_irqrestore(&txq->lock, flags2);
IWL_ERR(trans, "No space in command queue\n");
iwl_op_mode_cmd_queue_full(trans->op_mode);
@@ -1588,7 +1589,7 @@ static int iwl_pcie_enqueue_hcmd(struct
spin_unlock_irqrestore(&trans_pcie->reg_lock, flags);
out:
- spin_unlock_bh(&txq->lock);
+ spin_unlock_irqrestore(&txq->lock, flags2);
free_dup_buf:
if (idx < 0)
kfree(dup_buf);
From: Yang Yingliang <[email protected]>
[ Upstream commit 68ae256945d2abe9036a7b68af4cc65aff79d5b7 ]
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/s3c_adc_battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
index 0ffe5cd3abf6..06b412c43aa7 100644
--- a/drivers/power/s3c_adc_battery.c
+++ b/drivers/power/s3c_adc_battery.c
@@ -392,7 +392,7 @@ static int s3c_adc_bat_remove(struct platform_device *pdev)
gpio_free(pdata->gpio_charge_finished);
}
- cancel_delayed_work(&bat_work);
+ cancel_delayed_work_sync(&bat_work);
if (pdata->exit)
pdata->exit();
--
2.30.2
From: Mark Langsdorf <[email protected]>
commit e483bb9a991bdae29a0caa4b3a6d002c968f94aa upstream.
In cm_write(), buf is always freed when reaching the end of the
function. If the requested count is less than table.length, the
allocated buffer will be freed but subsequent calls to cm_write() will
still try to access it.
Remove the unconditional kfree(buf) at the end of the function and
set the buf to NULL in the -EINVAL error path to match the rest of
function.
Fixes: 03d1571d9513 ("ACPI: custom_method: fix memory leaks")
Signed-off-by: Mark Langsdorf <[email protected]>
Cc: 5.4+ <[email protected]> # 5.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/custom_method.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/acpi/custom_method.c
+++ b/drivers/acpi/custom_method.c
@@ -50,6 +50,7 @@ static ssize_t cm_write(struct file *fil
(*ppos + count < count) ||
(count > uncopied_bytes)) {
kfree(buf);
+ buf = NULL;
return -EINVAL;
}
@@ -71,7 +72,6 @@ static ssize_t cm_write(struct file *fil
add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE);
}
- kfree(buf);
return count;
}
From: Vasily Gorbik <[email protected]>
commit 6f3353c2d2b3eb4de52e9704cb962712033db181 upstream.
Current ebpf disassembly buffer size of 64 is too small. E.g. this line
takes 65 bytes:
01fffff8005822e: ec8100ed8065\tclgrj\t%r8,%r1,8,001fffff80058408\n\0
Double the buffer size like it is done for the kernel disassembly buffer.
Fixes the following KASAN finding:
UG: KASAN: stack-out-of-bounds in print_fn_code+0x34c/0x380
Write of size 1 at addr 001fff800ad5f970 by task test_progs/853
CPU: 53 PID: 853 Comm: test_progs Not tainted
5.12.0-rc7-23786-g23457d86b1f0-dirty #19
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
[<0000000cd8e0538a>] show_stack+0x17a/0x1668
[<0000000cd8e2a5d8>] dump_stack+0x140/0x1b8
[<0000000cd8e16e74>] print_address_description.constprop.0+0x54/0x260
[<0000000cd75a8698>] kasan_report+0xc8/0x130
[<0000000cd6e26da4>] print_fn_code+0x34c/0x380
[<0000000cd6ea0f4e>] bpf_int_jit_compile+0xe3e/0xe58
[<0000000cd72c4c88>] bpf_prog_select_runtime+0x5b8/0x9c0
[<0000000cd72d1bf8>] bpf_prog_load+0xa78/0x19c0
[<0000000cd72d7ad6>] __do_sys_bpf.part.0+0x18e/0x768
[<0000000cd6e0f392>] do_syscall+0x12a/0x220
[<0000000cd8e333f8>] __do_syscall+0x98/0xc8
[<0000000cd8e54834>] system_call+0x6c/0x94
1 lock held by test_progs/853:
#0: 0000000cd9bf7460 (report_lock){....}-{2:2}, at:
kasan_report+0x96/0x130
addr 001fff800ad5f970 is located in stack of task test_progs/853 at
offset 96 in frame:
print_fn_code+0x0/0x380
this frame has 1 object:
[32, 96) 'buffer'
Memory state around the buggy address:
001fff800ad5f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5f880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>001fff800ad5f900: 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 f3 f3
^
001fff800ad5f980: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5fa00: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00
Cc: <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/dis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -2033,7 +2033,7 @@ void show_code(struct pt_regs *regs)
void print_fn_code(unsigned char *code, unsigned long len)
{
- char buffer[64], *ptr;
+ char buffer[128], *ptr;
int opsize, i;
while (len) {
From: Marijn Suijten <[email protected]>
[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ]
Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive. Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.
In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all. This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.
Suggested-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
index 8e6c9b598a57..d8c7b8a6a418 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
@@ -128,9 +128,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
+ /*
+ * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+ * the vsync_clk equating to roughly half the desired panel refresh rate.
+ * This is only necessary as stability fallback if interrupts from the
+ * panel arrive too late or not at all, but is currently used by default
+ * because these panel interrupts are not wired up yet.
+ */
mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
mdp5_write(mdp5_kms,
- REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+ REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
mdp5_write(mdp5_kms,
REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);
--
2.30.2
From: Mahesh Salgaonkar <[email protected]>
commit 5ae5bc12d0728db60a0aa9b62160ffc038875f1a upstream.
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
eeh_check_failure(token) # token = virtual MMIO address
addr = eeh_token_to_phys(token);
edev = eeh_addr_cache_get_dev(addr);
if (!edev)
return 0;
eeh_dev_check_failure(edev); <= Dispatch the EEH event
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit 33439620680be ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
kworker/u16:0-7 [001] .... 108.883775: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x80103000a510
dmesg shows no EEH recovery messages:
[ 108.563768] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x9ae) != mcp_pulse (0x7fff)
[ 108.563788] bnx2x: [bnx2x_hw_stats_update:870(eth2)]NIG timer max (4294967295)
[ 108.883788] bnx2x: [bnx2x_acquire_hw_lock:2013(eth1)]lock_status 0xffffffff resource_bit 0x1
[ 108.884407] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
[ 108.884976] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
<..>
After this patch:
eeh_addr_cache_get_dev() trace shows correct physical address:
<idle>-0 [001] ..s. 1043.123828: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x40080bc7cd8
dmesg logs shows EEH recovery getting triggerred:
[ 964.323980] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x746f) != mcp_pulse (0x7fff)
[ 964.323991] EEH: Recovering PHB#30-PE#10000
[ 964.324002] EEH: PE location: N/A, PHB location: N/A
[ 964.324006] EEH: Frozen PHB#30-PE#10000 detected
<..>
Fixes: 33439620680b ("powerpc/eeh: Handle hugepages in ioremap space")
Cc: [email protected] # v5.3+
Reported-by: Dominic DeMarco <[email protected]>
Signed-off-by: Mahesh Salgaonkar <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/161821396263.48361.2796709239866588652.stgit@jupiter
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/eeh.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -367,14 +367,11 @@ static inline unsigned long eeh_token_to
pa = pte_pfn(*ptep);
/* On radix we can do hugepage mappings for io, so handle that */
- if (hugepage_shift) {
- pa <<= hugepage_shift;
- pa |= token & ((1ul << hugepage_shift) - 1);
- } else {
- pa <<= PAGE_SHIFT;
- pa |= token & (PAGE_SIZE - 1);
- }
+ if (!hugepage_shift)
+ hugepage_shift = PAGE_SHIFT;
+ pa <<= PAGE_SHIFT;
+ pa |= token & ((1ul << hugepage_shift) - 1);
return pa;
}
From: Tony Ambardar <[email protected]>
commit 7de21e679e6a789f3729e8402bc440b623a28eae upstream.
A few archs like powerpc have different errno.h values for macros
EDEADLOCK and EDEADLK. In code including both libc and linux versions of
errno.h, this can result in multiple definitions of EDEADLOCK in the
include chain. Definitions to the same value (e.g. seen with mips) do
not raise warnings, but on powerpc there are redefinitions changing the
value, which raise warnings and errors (if using "-Werror").
Guard against these redefinitions to avoid build errors like the following,
first seen cross-compiling libbpf v5.8.9 for powerpc using GCC 8.4.0 with
musl 1.1.24:
In file included from ../../arch/powerpc/include/uapi/asm/errno.h:5,
from ../../include/linux/err.h:8,
from libbpf.c:29:
../../include/uapi/asm-generic/errno.h:40: error: "EDEADLOCK" redefined [-Werror]
#define EDEADLOCK EDEADLK
In file included from toolchain-powerpc_8540_gcc-8.4.0_musl/include/errno.h:10,
from libbpf.c:26:
toolchain-powerpc_8540_gcc-8.4.0_musl/include/bits/errno.h:58: note: this is the location of the previous definition
#define EDEADLOCK 58
cc1: all warnings being treated as errors
Cc: Stable <[email protected]>
Reported-by: Rosen Penev <[email protected]>
Signed-off-by: Tony Ambardar <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/uapi/asm/errno.h | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/include/uapi/asm/errno.h
+++ b/arch/powerpc/include/uapi/asm/errno.h
@@ -1,6 +1,7 @@
#ifndef _ASM_POWERPC_ERRNO_H
#define _ASM_POWERPC_ERRNO_H
+#undef EDEADLOCK
#include <asm-generic/errno.h>
#undef EDEADLOCK
From: Steven Rostedt (VMware) <[email protected]>
commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream.
# echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
will cause switch_mm to stop tracing by the traceoff command.
# echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
does nothing.
The reason is that the parsing in the write function only processes
commands if it finished parsing (there is white space written after the
command). That's to handle:
write(fd, "switch_mm:", 10);
write(fd, "traceoff", 8);
cases, where the command is broken over multiple writes.
The problem is if the file descriptor is closed, then the write call is
not processed, and the command needs to be processed in the release code.
The release code can handle matching of functions, but does not handle
commands.
Cc: [email protected]
Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -4401,8 +4401,11 @@ int ftrace_regex_release(struct inode *i
parser = &iter->parser;
if (trace_parser_loaded(parser)) {
+ int enable = !(iter->flags & FTRACE_ITER_NOTRACE);
+
parser->buffer[parser->idx] = 0;
- ftrace_match_records(iter->hash, parser->buffer, parser->idx);
+ ftrace_process_regex(iter->hash, parser->buffer,
+ parser->idx, enable);
}
trace_parser_put(parser);
From: Anirudh Rayabharam <[email protected]>
commit 4a5d797a9f9c4f18585544237216d7812686a71f upstream.
Fix a general protection fault reported by syzbot due to a race between
gadget_setup() and gadget_unbind() in raw_gadget.
The gadget core is supposed to guarantee that there won't be any more
callbacks to the gadget driver once the driver's unbind routine is
called. That guarantee is enforced in usb_gadget_remove_driver as
follows:
usb_gadget_disconnect(udc->gadget);
if (udc->gadget->irq)
synchronize_irq(udc->gadget->irq);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc);
usb_gadget_disconnect turns off the pullup resistor, telling the host
that the gadget is no longer connected and preventing the transmission
of any more USB packets. Any packets that have already been received
are sure to processed by the UDC driver's interrupt handler by the time
synchronize_irq returns.
But this doesn't work with dummy_hcd, because dummy_hcd doesn't use
interrupts; it uses a timer instead. It does have code to emulate the
effect of synchronize_irq, but that code doesn't get invoked at the
right time -- it currently runs in usb_gadget_udc_stop, after the unbind
callback instead of before. Indeed, there's no way for
usb_gadget_remove_driver to invoke this code before the unbind callback.
To fix this, move the synchronize_irq() emulation code to dummy_pullup
so that it runs before unbind. Also, add a comment explaining why it is
necessary to have it there.
Reported-by: [email protected]
Suggested-by: Alan Stern <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/dummy_hcd.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -920,6 +920,21 @@ static int dummy_pullup(struct usb_gadge
spin_lock_irqsave(&dum->lock, flags);
dum->pullup = (value != 0);
set_link_state(dum_hcd);
+ if (value == 0) {
+ /*
+ * Emulate synchronize_irq(): wait for callbacks to finish.
+ * This seems to be the best place to emulate the call to
+ * synchronize_irq() that's in usb_gadget_remove_driver().
+ * Doing it in dummy_udc_stop() would be too late since it
+ * is called after the unbind callback and unbind shouldn't
+ * be invoked until all the other callbacks are finished.
+ */
+ while (dum->callback_usage > 0) {
+ spin_unlock_irqrestore(&dum->lock, flags);
+ usleep_range(1000, 2000);
+ spin_lock_irqsave(&dum->lock, flags);
+ }
+ }
spin_unlock_irqrestore(&dum->lock, flags);
usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
@@ -1000,14 +1015,6 @@ static int dummy_udc_stop(struct usb_gad
spin_lock_irq(&dum->lock);
dum->ints_enabled = 0;
stop_activity(dum);
-
- /* emulate synchronize_irq(): wait for callbacks to finish */
- while (dum->callback_usage > 0) {
- spin_unlock_irq(&dum->lock);
- usleep_range(1000, 2000);
- spin_lock_irq(&dum->lock);
- }
-
dum->driver = NULL;
spin_unlock_irq(&dum->lock);
From: Tetsuo Handa <[email protected]>
commit b2192cfeba8481224da0a4ec3b4a7ccd80b1623b upstream.
KMSAN complains that vmci_check_host_caps() left the payload part of
check_msg uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x202/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_guest_probe_device+0xf0b/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Uninit was created at:
kmsan_internal_poison_shadow+0x5c/0xf0
kmsan_slab_alloc+0x8d/0xe0
kmem_cache_alloc+0x84f/0xe30
vmci_guest_probe_device+0xd11/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Bytes 28-31 of 36 are uninitialized
Memory access of size 36 starts at ffff8881675e5f00
=====================================================
Fixes: 1f166439917b69d3 ("VMCI: guest side driver implementation.")
Cc: <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/vmw_vmci/vmci_guest.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -172,7 +172,7 @@ static int vmci_check_host_caps(struct p
VMCI_UTIL_NUM_RESOURCES * sizeof(u32);
struct vmci_datagram *check_msg;
- check_msg = kmalloc(msg_size, GFP_KERNEL);
+ check_msg = kzalloc(msg_size, GFP_KERNEL);
if (!check_msg) {
dev_err(&pdev->dev, "%s: Insufficient memory\n", __func__);
return -ENOMEM;
From: Taehee Yoo <[email protected]>
commit 4b793acdca0050739b99ace6a8b9e7f717f57c6b upstream.
When HSR interface is sending a frame, it finds a node with
the destination ethernet address from the list.
If there is no node, it calls WARN_ONCE().
But, using WARN_ONCE() for this situation is a little bit overdoing.
So, in this patch, the netdev_err() is used instead.
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: George Kennedy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_framereg.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -297,7 +297,8 @@ void hsr_addr_subst_dest(struct hsr_node
node_dst = find_node_by_AddrA(&port->hsr->node_db, eth_hdr(skb)->h_dest);
if (!node_dst) {
- WARN_ONCE(1, "%s: Unknown node\n", __func__);
+ if (net_ratelimit())
+ netdev_err(skb->dev, "%s: Unknown node\n", __func__);
return;
}
if (port->type != node_dst->AddrB_port)
From: Maciej W. Rozycki <[email protected]>
commit f626ca682912fab55dff15469ce893ae16b65c7e upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
For those systems the PCI BARs that request a mapping in the I/O space
have the length recorded in the corresponding PCI resource set to zero,
which makes it unassigned:
# lspci -s 0031:02:04.0 -v
0031:02:04.0 FDDI network controller: Digital Equipment Corporation PCI-to-PDQ Interface Chip [PFI] FDDI (DEFPA) (rev 02)
Subsystem: Digital Equipment Corporation FDDIcontroller/PCI (DEFPA)
Flags: bus master, medium devsel, latency 136, IRQ 57, NUMA node 8
Memory at 620c080020000 (32-bit, non-prefetchable) [size=128]
I/O ports at <unassigned> [disabled]
Memory at 620c080030000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: defxx
Kernel modules: defxx
#
Regardless the driver goes ahead and requests it (here observed with a
Raptor Talos II POWER9 system), resulting in an odd /proc/ioport entry:
# cat /proc/ioports
00000000-ffffffffffffffff : 0031:02:04.0
#
Furthermore, the system gets confused as the driver actually continues
and pokes at those locations, causing a flood of messages being output
to the system console by the underlying system firmware, like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
defxx 0031:02:04.0: enabling device (0140 -> 0142)
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010000
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
and so on and so on (possibly intermixed actually, as there's no locking
between the kernel and the firmware in console port access with this
particular system, but cleaned up above for clarity), and once some 10k
of such pairs of the latter two messages have been produced an interace
eventually shows up in a useless state:
0031:02:04.0: DEFPA at I/O addr = 0x0, IRQ = 57, Hardware addr = 00-00-00-00-00-00
This was not expected to happen as resource handling was added to the
driver a while ago, because it was not known at that time that a PCI
system would be possible that cannot assign port I/O resources, and
oddly enough `request_region' does not fail, which would have caught it.
Correct the problem then by checking for the length of zero for the CSR
resource and bail out gracefully refusing to register an interface if
that turns out to be the case, producing messages like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
0031:02:04.0: Cannot use I/O, no address set, aborting
0031:02:04.0: Recompile driver with "CONFIG_DEFXX_MMIO=y"
Keep the original check for the EISA MMIO resource as implemented,
because in that case the length is hardwired to 0x400 as a consequence
of how the compare/mask address decoding works in the ESIC chip and it
is only the base address that is set to zero if MMIO has been disabled
for the adapter in EISA configuration, which in turn could be a valid
bus address in a legacy-free system implementing PCI, especially for
port I/O.
Where the EISA MMIO resource has been disabled for the adapter in EISA
configuration this arrangement keeps producing messages like:
eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
00:05: Cannot use MMIO, no address set, aborting
00:05: Recompile driver with "CONFIG_DEFXX_MMIO=n"
00:05: Or run ECU and set adapter's MMIO location
with the last two lines now swapped for easier handling in the driver.
There is no need to check for and catch the case of a port I/O resource
not having been assigned for EISA as the adapter uses the slot-specific
I/O space, which gets assigned by how EISA has been specified and maps
directly to the particular slot an option card has been placed in. And
the EISA variant of the adapter has additional registers that are only
accessible via the port I/O space anyway.
While at it factor out the error message calls into helpers and fix an
argument order bug with the `pr_err' call now in `dfx_register_res_err'.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: 4d0438e56a8f ("defxx: Clean up DEFEA resource management")
Cc: [email protected] # v3.19+
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/fddi/defxx.c | 47 ++++++++++++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 17 deletions(-)
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -495,6 +495,25 @@ static const struct net_device_ops dfx_n
.ndo_set_mac_address = dfx_ctl_set_mac_address,
};
+static void dfx_register_res_alloc_err(const char *print_name, bool mmio,
+ bool eisa)
+{
+ pr_err("%s: Cannot use %s, no address set, aborting\n",
+ print_name, mmio ? "MMIO" : "I/O");
+ pr_err("%s: Recompile driver with \"CONFIG_DEFXX_MMIO=%c\"\n",
+ print_name, mmio ? 'n' : 'y');
+ if (eisa && mmio)
+ pr_err("%s: Or run ECU and set adapter's MMIO location\n",
+ print_name);
+}
+
+static void dfx_register_res_err(const char *print_name, bool mmio,
+ unsigned long start, unsigned long len)
+{
+ pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, aborting\n",
+ print_name, mmio ? "MMIO" : "I/O", len, start);
+}
+
/*
* ================
* = dfx_register =
@@ -568,15 +587,12 @@ static int dfx_register(struct device *b
dev_set_drvdata(bdev, dev);
dfx_get_bars(bdev, bar_start, bar_len);
- if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {
- pr_err("%s: Cannot use MMIO, no address set, aborting\n",
- print_name);
- pr_err("%s: Run ECU and set adapter's MMIO location\n",
- print_name);
- pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""
- "\n", print_name);
+ if (bar_len[0] == 0 ||
+ (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0)) {
+ dfx_register_res_alloc_err(print_name, dfx_use_mmio,
+ dfx_bus_eisa);
err = -ENXIO;
- goto err_out;
+ goto err_out_disable;
}
if (dfx_use_mmio)
@@ -585,18 +601,16 @@ static int dfx_register(struct device *b
else
region = request_region(bar_start[0], bar_len[0], print_name);
if (!region) {
- pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "
- "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,
- (long)bar_len[0], (long)bar_start[0]);
+ dfx_register_res_err(print_name, dfx_use_mmio,
+ bar_start[0], bar_len[0]);
err = -EBUSY;
goto err_out_disable;
}
if (bar_start[1] != 0) {
region = request_region(bar_start[1], bar_len[1], print_name);
if (!region) {
- pr_err("%s: Cannot reserve I/O resource "
- "0x%lx @ 0x%lx, aborting\n", print_name,
- (long)bar_len[1], (long)bar_start[1]);
+ dfx_register_res_err(print_name, 0,
+ bar_start[1], bar_len[1]);
err = -EBUSY;
goto err_out_csr_region;
}
@@ -604,9 +618,8 @@ static int dfx_register(struct device *b
if (bar_start[2] != 0) {
region = request_region(bar_start[2], bar_len[2], print_name);
if (!region) {
- pr_err("%s: Cannot reserve I/O resource "
- "0x%lx @ 0x%lx, aborting\n", print_name,
- (long)bar_len[2], (long)bar_start[2]);
+ dfx_register_res_err(print_name, 0,
+ bar_start[2], bar_len[2]);
err = -EBUSY;
goto err_out_bh_region;
}
From: Guchun Chen <[email protected]>
[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]
ttm->sg needs to be checked before accessing its child member.
Call Trace:
amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
ttm_bo_release+0x17d/0x300 [ttm]
amdgpu_bo_unref+0x1a/0x30 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
kfd_ioctl+0x222/0x400 [amdgpu]
? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
__x64_sys_ioctl+0x8e/0xd0
? __context_tracking_exit+0x52/0x90
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 062c23125b2a..6beb3e76e1c9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -566,7 +566,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
/* double check that we don't free the table twice */
- if (!ttm->sg->sgl)
+ if (!ttm->sg || !ttm->sg->sgl)
return;
/* free the sg table and pages again */
--
2.30.2
From: Archie Pusaka <[email protected]>
commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Example crash call trace:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe3/0x144 lib/dump_stack.c:118
print_address_description+0x67/0x22a mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report mm/kasan/report.c:412 [inline]
kasan_report+0x251/0x28f mm/kasan/report.c:396
hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free mm/kasan/kasan.c:521 [inline]
__kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
slab_free mm/slub.c:3009 [inline]
kfree+0x182/0x21e mm/slub.c:3972
hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Cc: George Kennedy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_event.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -498,6 +498,7 @@ struct hci_chan {
struct sk_buff_head data_q;
unsigned int sent;
__u8 state;
+ bool amp;
};
struct hci_conn_params {
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4385,6 +4385,7 @@ static void hci_loglink_complete_evt(str
return;
hchan->handle = le16_to_cpu(ev->handle);
+ hchan->amp = true;
BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan);
@@ -4417,7 +4418,7 @@ static void hci_disconn_loglink_complete
hci_dev_lock(hdev);
hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle));
- if (!hchan)
+ if (!hchan || !hchan->amp)
goto unlock;
amp_destroy_logical_link(hchan, ev->reason);
From: Or Cohen <[email protected]>
commit c61760e6940dd4039a7f5e84a6afc9cdbf4d82b6 upstream.
Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.
This can be triggered by the following simple program:
int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
addr.sa_family = AF_NFC;
addr.nfc_protocol = NFC_PROTO_NFC_DEP;
bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
close(sock1);
close(sock2);
Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.
This addresses CVE-2021-23134.
Reported-by: Or Cohen <[email protected]>
Reported-by: Nadav Markus <[email protected]>
Fixes: c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
Signed-off-by: Or Cohen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_sock.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -120,12 +120,14 @@ static int llcp_sock_bind(struct socket
GFP_KERNEL);
if (!llcp_sock->service_name) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
ret = -ENOMEM;
goto put_dev;
}
llcp_sock->ssap = nfc_llcp_get_sdp_ssap(local, llcp_sock);
if (llcp_sock->ssap == LLCP_SAP_MAX) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
kfree(llcp_sock->service_name);
llcp_sock->service_name = NULL;
ret = -EADDRINUSE;
@@ -715,6 +717,7 @@ static int llcp_sock_connect(struct sock
llcp_sock->ssap = nfc_llcp_get_local_ssap(local);
if (llcp_sock->ssap == LLCP_SAP_MAX) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
ret = -ENOMEM;
goto put_dev;
}
@@ -753,6 +756,7 @@ static int llcp_sock_connect(struct sock
sock_unlink:
nfc_llcp_put_ssap(local, llcp_sock->ssap);
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
nfc_llcp_sock_unlink(&local->connecting_sockets, sk);
kfree(llcp_sock->service_name);
From: Colin Ian King <[email protected]>
[ Upstream commit 9c2076090c2815fe7c49676df68dde7e60a9b9fc ]
The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.
Fixes: c41442474a26 ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <[email protected]>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/r8a66597-udc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index e34094647603..4eb8e181763d 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1867,6 +1867,8 @@ static int r8a66597_probe(struct platform_device *pdev)
return PTR_ERR(reg);
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!ires)
+ return -EINVAL;
irq = ires->start;
irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
--
2.30.2
From: Johan Hovold <[email protected]>
[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]
Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.
Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.
Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.
Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/tty_io.c | 8 ++++----
include/linux/tty_driver.h | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index dff507cd0250..bdb25b23e8d3 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2762,14 +2762,14 @@ out:
* @p: pointer to result
*
* Obtain the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
static int tty_tiocmget(struct tty_struct *tty, int __user *p)
{
- int retval = -EINVAL;
+ int retval = -ENOTTY;
if (tty->ops->tiocmget) {
retval = tty->ops->tiocmget(tty);
@@ -2787,7 +2787,7 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p)
* @p: pointer to desired bits
*
* Set the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
@@ -2799,7 +2799,7 @@ static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
unsigned int set, clear, val;
if (tty->ops->tiocmset == NULL)
- return -EINVAL;
+ return -ENOTTY;
retval = get_user(val, p);
if (retval)
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 161052477f77..6d8db1555260 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -235,7 +235,7 @@
*
* Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
* structure to complete. This method is optional and will only be called
- * if provided (otherwise EINVAL will be returned).
+ * if provided (otherwise ENOTTY will be returned).
*/
#include <linux/export.h>
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 9baa3d64e8e2373ddd11c346439e5dfccb2cbb0d ]
There a 3 array for-loops that don't check the upper bounds of the
index into arrays and this may lead to potential out-of-bounds
reads. Fix this by adding array size upper bounds checks to be
full safe.
Addresses-Coverity: ("Out-of-bounds read")
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: 333829110f1d ("[media] m88rs6000t: add new dvb-s/s2 tuner for integrated chip M88RS6000")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/m88rs6000t.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/tuners/m88rs6000t.c b/drivers/media/tuners/m88rs6000t.c
index 504bfbc4027a..f78caf3c2bbd 100644
--- a/drivers/media/tuners/m88rs6000t.c
+++ b/drivers/media/tuners/m88rs6000t.c
@@ -535,7 +535,7 @@ static int m88rs6000t_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
PGA2_cri = PGA2_GC >> 2;
PGA2_crf = PGA2_GC & 0x03;
- for (i = 0; i <= RF_GC; i++)
+ for (i = 0; i <= RF_GC && i < ARRAY_SIZE(RFGS); i++)
RFG += RFGS[i];
if (RF_GC == 0)
@@ -547,12 +547,12 @@ static int m88rs6000t_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
if (RF_GC == 3)
RFG += 100;
- for (i = 0; i <= IF_GC; i++)
+ for (i = 0; i <= IF_GC && i < ARRAY_SIZE(IFGS); i++)
IFG += IFGS[i];
TIAG = TIA_GC * TIA_GS;
- for (i = 0; i <= BB_GC; i++)
+ for (i = 0; i <= BB_GC && i < ARRAY_SIZE(BBGS); i++)
BBG += BBGS[i];
PGA2G = PGA2_cri * PGA2_cri_GS + PGA2_crf * PGA2_crf_GS;
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]
Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:
.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27: got restricted __le32 [usertype]
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/pch_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index f4b81e8f2272..6e84b27c14dd 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1797,7 +1797,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
}
/* prevent from using desc. - set HOST BUSY */
dma_desc->status |= PCH_UDC_BS_HST_BSY;
- dma_desc->dataptr = cpu_to_le32(DMA_ADDR_INVALID);
+ dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID);
req->td_data = dma_desc;
req->td_data_last = dma_desc;
req->chain_len = 1;
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit f6368c60561370e4a92fac22982a3bd656172170 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd418af8..97b152e43f9c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sun3x_esp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index d50c5ed8f428..167ae2d29e47 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -233,7 +233,9 @@ static int esp_sun3x_probe(struct platform_device *dev)
if (!esp->command_block)
goto fail_unmap_regs_dma;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = err = platform_get_irq(dev, 0);
+ if (err < 0)
+ goto fail_unmap_command_block;
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED,
"SUN3X ESP", esp);
if (err < 0)
--
2.30.2
From: Andy Shevchenko <[email protected]>
commit 50a318cc9b54a36f00beadf77e578a50f3620477 upstream.
The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a12138 completely.
While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.
Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/pch_udc.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -615,18 +615,22 @@ static void pch_udc_reconnect(struct pch
static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
int is_active)
{
+ unsigned long iflags;
+
+ spin_lock_irqsave(&dev->lock, iflags);
if (is_active) {
pch_udc_reconnect(dev);
dev->vbus_session = 1;
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_lock(&dev->lock);
+ spin_unlock_irqrestore(&dev->lock, iflags);
dev->driver->disconnect(&dev->gadget);
- spin_unlock(&dev->lock);
+ spin_lock_irqsave(&dev->lock, iflags);
}
pch_udc_set_disconnect(dev);
dev->vbus_session = 0;
}
+ spin_unlock_irqrestore(&dev->lock, iflags);
}
/**
@@ -1183,20 +1187,25 @@ static int pch_udc_pcd_selfpowered(struc
static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
{
struct pch_udc_dev *dev;
+ unsigned long iflags;
if (!gadget)
return -EINVAL;
+
dev = container_of(gadget, struct pch_udc_dev, gadget);
+
+ spin_lock_irqsave(&dev->lock, iflags);
if (is_on) {
pch_udc_reconnect(dev);
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_lock(&dev->lock);
+ spin_unlock_irqrestore(&dev->lock, iflags);
dev->driver->disconnect(&dev->gadget);
- spin_unlock(&dev->lock);
+ spin_lock_irqsave(&dev->lock, iflags);
}
pch_udc_set_disconnect(dev);
}
+ spin_unlock_irqrestore(&dev->lock, iflags);
return 0;
}
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 38d0b1c9cec71e6d0f3bddef0bbce41d05a3e796 ]
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5d4a3df59d0c..baaeb753fa79 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -98,6 +98,7 @@ EXPORT_SYMBOL_GPL(init_phb_dynamic);
int remove_phb_dynamic(struct pci_controller *phb)
{
struct pci_bus *b = phb->bus;
+ struct pci_host_bridge *host_bridge = to_pci_host_bridge(b->bridge);
struct resource *res;
int rc, i;
@@ -124,7 +125,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
/* Remove the PCI bus and unregister the bridge device from sysfs */
phb->bus = NULL;
pci_remove_bus(b);
- device_unregister(b->bridge);
+ host_bridge->bus = NULL;
+ device_unregister(&host_bridge->dev);
/* Now release the IO resource */
if (res->flags & IORESOURCE_IO)
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit a8e083ee8e2a6c94c29733835adae8bf5b832748 ]
In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).
Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().
My patch set txq->txd to NULL after the first free to avoid the
double free.
Fixes: a66098daacee2 ("mwl8k: Marvell TOPDOG wireless driver")
Signed-off-by: Lv Yunlong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mwl8k.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 088429d0a634..d448480b8406 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1459,6 +1459,7 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index)
txq->skb = kcalloc(MWL8K_TX_DESCS, sizeof(*txq->skb), GFP_KERNEL);
if (txq->skb == NULL) {
pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma);
+ txq->txd = NULL;
return -ENOMEM;
}
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]
Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:
[ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[ 55.245843] <IRQ>
[ 55.245843] ? pch_udc_svc_data_out+0x160/0x160
Check if driver is present before calling ->setup().
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/pch_udc.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 6e84b27c14dd..152c2ee0ca50 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -2341,6 +2341,21 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
pch_udc_set_dma(dev, DMA_DIR_RX);
}
+static int pch_udc_gadget_setup(struct pch_udc_dev *dev)
+ __must_hold(&dev->lock)
+{
+ int rc;
+
+ /* In some cases we can get an interrupt before driver gets setup */
+ if (!dev->driver)
+ return -ESHUTDOWN;
+
+ spin_unlock(&dev->lock);
+ rc = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_lock(&dev->lock);
+ return rc;
+}
+
/**
* pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
* @dev: Reference to the device structure
@@ -2412,15 +2427,12 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
else /* OUT */
dev->gadget.ep0 = &ep->ep;
- spin_lock(&dev->lock);
/* If Mass storage Reset */
if ((dev->setup_data.bRequestType == 0x21) &&
(dev->setup_data.bRequest == 0xFF))
dev->prot_stall = 0;
/* call gadget with setup data received */
- setup_supported = dev->driver->setup(&dev->gadget,
- &dev->setup_data);
- spin_unlock(&dev->lock);
+ setup_supported = pch_udc_gadget_setup(dev);
if (dev->setup_data.bRequestType & USB_DIR_IN) {
ep->td_data->status = (ep->td_data->status &
@@ -2673,9 +2685,7 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
dev->ep[i].halted = 0;
}
dev->stall = 0;
- spin_unlock(&dev->lock);
- dev->driver->setup(&dev->gadget, &dev->setup_data);
- spin_lock(&dev->lock);
+ pch_udc_gadget_setup(dev);
}
/**
@@ -2710,9 +2720,7 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
dev->stall = 0;
/* call gadget zero with setup data received */
- spin_unlock(&dev->lock);
- dev->driver->setup(&dev->gadget, &dev->setup_data);
- spin_lock(&dev->lock);
+ pch_udc_gadget_setup(dev);
}
/**
--
2.30.2
From: Nathan Chancellor <[email protected]>
[ Upstream commit de5bc7b425d4c27ae5faa00ea7eb6b9780b9a355 ]
dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a
$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):
Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.
Fixes: 7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/perf_event_amd_iommu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/perf_event_amd_iommu.c b/arch/x86/kernel/cpu/perf_event_amd_iommu.c
index 97242a9242bd..ec0bfbab7265 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_iommu.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_iommu.c
@@ -80,12 +80,12 @@ static struct attribute_group amd_iommu_format_group = {
* sysfs events attributes
*---------------------------------------------*/
struct amd_iommu_event_desc {
- struct kobj_attribute attr;
+ struct device_attribute attr;
const char *event;
};
-static ssize_t _iommu_event_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
+static ssize_t _iommu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct amd_iommu_event_desc *event =
container_of(attr, struct amd_iommu_event_desc, attr);
--
2.30.2
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mlme.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4ab78bc6c2ca..7e2f0cd94e62 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1133,6 +1133,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
sdata->vif.csa_active = false;
ifmgd->csa_waiting_bcn = false;
+ /*
+ * If the CSA IE is still present on the beacon after the switch,
+ * we need to consider it as a new CSA (possibly to self).
+ */
+ ifmgd->beacon_crc_valid = false;
ret = drv_post_channel_switch(sdata);
if (ret) {
--
2.30.2
From: Miklos Szeredi <[email protected]>
[ Upstream commit 8217673d07256b22881127bf50dce874d0e51653 ]
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/cuse.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index d9aba9700726..b83367300f48 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -616,6 +616,8 @@ static int __init cuse_init(void)
cuse_channel_fops.owner = THIS_MODULE;
cuse_channel_fops.open = cuse_channel_open;
cuse_channel_fops.release = cuse_channel_release;
+ /* CUSE is not prepared for FUSE_DEV_IOC_CLONE */
+ cuse_channel_fops.unlocked_ioctl = NULL;
cuse_class = class_create(THIS_MODULE, "cuse");
if (IS_ERR(cuse_class))
--
2.30.2
From: Jia Zhou <[email protected]>
[ Upstream commit abc21649b3e5c34b143bf86f0c78e33d5815e250 ]
modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <[email protected]>
Signed-off-by: Yi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/init.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/core/init.c b/sound/core/init.c
index 67765c61e5d5..d0f8405fdfd8 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -403,10 +403,8 @@ int snd_card_disconnect(struct snd_card *card)
return 0;
}
card->shutdown = 1;
- spin_unlock(&card->files_lock);
/* replace file->f_op with special dummy operations */
- spin_lock(&card->files_lock);
list_for_each_entry(mfile, &card->files_list, list) {
/* it's critical part, use endless loop */
/* we have no room to fail */
--
2.30.2
From: Tetsuo Handa <[email protected]>
[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]
syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 515f3e52f70a..0de77e741a78 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -434,6 +434,8 @@ struct l2cap_chan *l2cap_chan_create(void)
if (!chan)
return NULL;
+ skb_queue_head_init(&chan->tx_q);
+ skb_queue_head_init(&chan->srej_q);
mutex_init(&chan->lock);
/* Set default lock nesting level */
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit ca4d4c34ae9aa5c3c0da76662c5e549d2fc0cc86 ]
If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
Fixes: c3b1e1e8a76f ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/pn533.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index bb3d5ea9869c..001c12867e43 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -1250,6 +1250,9 @@ static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a,
if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0)
return false;
+ if (type_a->nfcid_len > NFC_NFCID1_MAXSIZE)
+ return false;
+
return true;
}
--
2.30.2
From: Archie Pusaka <[email protected]>
[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index f2db50da8ce2..515f3e52f70a 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -499,7 +499,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+
chan->conf_state = 0;
+ set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
--
2.30.2
From: Xie He <[email protected]>
[ Upstream commit 5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]
There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.
However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).
This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <[email protected]>
Acked-by: Martin Schiller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/lapbether.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 666bbacb8cb4..24daa1d0e9c5 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -56,6 +56,8 @@ struct lapbethdev {
struct list_head node;
struct net_device *ethdev; /* link to ethernet device */
struct net_device *axdev; /* lapbeth device (lapb#) */
+ bool up;
+ spinlock_t up_lock; /* Protects "up" */
};
static LIST_HEAD(lapbeth_devices);
@@ -103,8 +105,9 @@ static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
rcu_read_lock();
lapbeth = lapbeth_get_x25_dev(dev);
if (!lapbeth)
- goto drop_unlock;
- if (!netif_running(lapbeth->axdev))
+ goto drop_unlock_rcu;
+ spin_lock_bh(&lapbeth->up_lock);
+ if (!lapbeth->up)
goto drop_unlock;
len = skb->data[0] + skb->data[1] * 256;
@@ -119,11 +122,14 @@ static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
goto drop_unlock;
}
out:
+ spin_unlock_bh(&lapbeth->up_lock);
rcu_read_unlock();
return 0;
drop_unlock:
kfree_skb(skb);
goto out;
+drop_unlock_rcu:
+ rcu_read_unlock();
drop:
kfree_skb(skb);
return 0;
@@ -151,13 +157,11 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb)
static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
- /*
- * Just to be *really* sure not to send anything if the interface
- * is down, the ethernet device may have gone.
- */
- if (!netif_running(dev))
+ spin_lock_bh(&lapbeth->up_lock);
+ if (!lapbeth->up)
goto drop;
/* There should be a pseudo header of 1 byte added by upper layers.
@@ -188,6 +192,7 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
goto drop;
}
out:
+ spin_unlock_bh(&lapbeth->up_lock);
return NETDEV_TX_OK;
drop:
kfree_skb(skb);
@@ -279,6 +284,7 @@ static const struct lapb_register_struct lapbeth_callbacks = {
*/
static int lapbeth_open(struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
if ((err = lapb_register(dev, &lapbeth_callbacks)) != LAPB_OK) {
@@ -286,13 +292,22 @@ static int lapbeth_open(struct net_device *dev)
return -ENODEV;
}
+ spin_lock_bh(&lapbeth->up_lock);
+ lapbeth->up = true;
+ spin_unlock_bh(&lapbeth->up_lock);
+
return 0;
}
static int lapbeth_close(struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
+ spin_lock_bh(&lapbeth->up_lock);
+ lapbeth->up = false;
+ spin_unlock_bh(&lapbeth->up_lock);
+
if ((err = lapb_unregister(dev)) != LAPB_OK)
pr_err("lapb_unregister error: %d\n", err);
@@ -350,6 +365,9 @@ static int lapbeth_new_device(struct net_device *dev)
dev_hold(dev);
lapbeth->ethdev = dev;
+ lapbeth->up = false;
+ spin_lock_init(&lapbeth->up_lock);
+
rc = -EIO;
if (register_netdevice(ndev))
goto fail;
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit 75258586793efc521e5dd52a5bf6c7a4cf7002be ]
In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp).
If nfc_tm_data_received() failed, the callee will free the resp via
kfree_skb() and return error. But in the exit branch, the resp
will be freed again.
My patch sets resp to NULL if nfc_tm_data_received() failed, to
avoid the double free.
Fixes: 1c7a4c24fbfd9 ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Lv Yunlong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/digital_dep.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/nfc/digital_dep.c b/net/nfc/digital_dep.c
index f72be7433df3..46375ff214c0 100644
--- a/net/nfc/digital_dep.c
+++ b/net/nfc/digital_dep.c
@@ -1187,6 +1187,8 @@ static void digital_tg_recv_dep_req(struct nfc_digital_dev *ddev, void *arg,
}
rc = nfc_tm_data_received(ddev->nfc_dev, resp);
+ if (rc)
+ resp = NULL;
exit:
kfree_skb(ddev->chaining_skb);
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ]
hdspm wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device
[ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.795181] Call Trace:
[ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm]
[ 1.795595] release_card_device+0x4b/0x80 [snd]
[ 1.795860] device_release+0x3b/0xa0
[ 1.796072] kobject_put+0x94/0x1b0
[ 1.796260] put_device+0x13/0x20
[ 1.796438] snd_card_free+0x61/0x90 [snd]
[ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdspm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 1a0c0d16a279..f4b164f19d30 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6912,7 +6912,8 @@ static int snd_hdspm_free(struct hdspm * hdspm)
if (hdspm->port)
pci_release_regions(hdspm->pci);
- pci_disable_device(hdspm->pci);
+ if (pci_is_enabled(hdspm->pci))
+ pci_disable_device(hdspm->pci);
return 0;
}
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()
[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x331/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmmsg+0x195/0x470 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 2267920c086a..3e917e358459 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -196,7 +196,6 @@ static int vti6_tnl_create2(struct net_device *dev)
strcpy(t->parms.name, dev->name);
- dev_hold(dev);
vti6_tnl_link(ip6n, t);
return 0;
@@ -900,6 +899,7 @@ static inline int vti6_dev_init_gen(struct net_device *dev)
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ dev_hold(dev);
return 0;
}
--
2.30.2
From: Kees Cook <[email protected]>
[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ]
An out of bounds write happens when setting the default power state.
KASAN sees this as:
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
==================================================================
BUG: KASAN: slab-out-of-bounds in
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157
CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x18/0x239
kasan_report+0x170/0x1a8
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
radeon_atombios_get_power_modes+0x144/0x1888 [radeon]
radeon_pm_init+0x1019/0x1904 [radeon]
rs690_init+0x76e/0x84a [radeon]
radeon_device_init+0x1c1a/0x21e5 [radeon]
radeon_driver_load_kms+0xf5/0x30b [radeon]
drm_dev_register+0x255/0x4a0 [drm]
radeon_pci_probe+0x246/0x2f6 [radeon]
pci_device_probe+0x1aa/0x294
really_probe+0x30e/0x850
driver_probe_device+0xe6/0x135
device_driver_attach+0xc1/0xf8
__driver_attach+0x13f/0x146
bus_for_each_dev+0xfa/0x146
bus_add_driver+0x2b3/0x447
driver_register+0x242/0x2c1
do_one_initcall+0x149/0x2fd
do_init_module+0x1ae/0x573
load_module+0x4dee/0x5cca
__do_sys_finit_module+0xf1/0x140
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Without KASAN, this will manifest later when the kernel attempts to
allocate memory that was stomped, since it collides with the inline slab
freelist pointer:
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
RIP: 0010:kfree+0x115/0x230
Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7
RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246
RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d
RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80
RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000
R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0
Call Trace:
__free_fdtable+0x16/0x1f
put_files_struct+0x81/0x9b
do_exit+0x433/0x94d
do_group_exit+0xa6/0xa6
__x64_sys_exit_group+0xf/0xf
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe80ef64bea
Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0.
RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea
RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0
R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0
Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ...
Use a valid power_state index when initializing the "flags" and "misc"
and "misc2" fields.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Reported-by: Erhard F. <[email protected]>
Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)")
Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 0c5b3eeff82d..230e2dcdf053 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2259,10 +2259,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
rdev->pm.default_power_state_index = state_index - 1;
rdev->pm.power_state[state_index - 1].default_clock_mode =
&rdev->pm.power_state[state_index - 1].clock_info[0];
- rdev->pm.power_state[state_index].flags &=
+ rdev->pm.power_state[state_index - 1].flags &=
~RADEON_PM_STATE_SINGLE_DISPLAY_ONLY;
- rdev->pm.power_state[state_index].misc = 0;
- rdev->pm.power_state[state_index].misc2 = 0;
+ rdev->pm.power_state[state_index - 1].misc = 0;
+ rdev->pm.power_state[state_index - 1].misc2 = 0;
}
return state_index;
}
--
2.30.2
From: Michael Ellerman <[email protected]>
commit aec86b052df6541cc97c5fca44e5934cbea4963b upstream.
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: [email protected] # v5.10+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/feature-fixups.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
+#include <linux/stop_machine.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
#include <asm/page.h>
@@ -279,8 +280,9 @@ void do_uaccess_flush_fixups(enum l1d_fl
: "unknown");
}
-void do_entry_flush_fixups(enum l1d_flush_type types)
+static int __do_entry_flush_fixups(void *data)
{
+ enum l1d_flush_type types = *(enum l1d_flush_type *)data;
unsigned int instrs[3], *dest;
long *start, *end;
int i;
@@ -331,6 +333,19 @@ void do_entry_flush_fixups(enum l1d_flus
: "ori type" :
(types & L1D_FLUSH_MTTRIG) ? "mttrig type"
: "unknown");
+
+ return 0;
+}
+
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+ /*
+ * The call to the fallback flush can not be safely patched in/out while
+ * other CPUs are executing it. So call __do_entry_flush_fixups() on one
+ * CPU while all other CPUs spin in the stop machine core with interrupts
+ * hard disabled.
+ */
+ stop_machine(__do_entry_flush_fixups, &types, NULL);
}
void do_rfi_flush_fixups(enum l1d_flush_type types)
From: Phil Elwell <[email protected]>
commit 75a41ce46bae6cbe7d3bb2584eb844291d642874 upstream.
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.
A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.
Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Phil Elwell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/gadget.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -144,6 +144,7 @@ struct dwc2_hsotg_req;
* @lock: State lock to protect contents of endpoint.
* @dir_in: Set to true if this endpoint is of the IN direction, which
* means that it is sending data to the Host.
+ * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
* @index: The index for the endpoint registers.
* @mc: Multi Count - number of transactions per microframe
* @interval - Interval for periodic endpoints
@@ -185,6 +186,7 @@ struct dwc2_hsotg_ep {
unsigned short fifo_index;
unsigned char dir_in;
+ unsigned char map_dir;
unsigned char index;
unsigned char mc;
u16 interval;
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -289,7 +289,7 @@ static void dwc2_hsotg_unmap_dma(struct
if (hs_req->req.length == 0)
return;
- usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
+ usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir);
}
/**
@@ -707,6 +707,7 @@ static int dwc2_hsotg_map_dma(struct dwc
if (hs_req->req.length == 0)
return 0;
+ hs_ep->map_dir = hs_ep->dir_in;
ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
if (ret)
goto dma_error;
From: Maciej W. Rozycki <[email protected]>
commit c1d337d45ec0a802299688e17d568c4e3a585895 upstream.
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -68,9 +68,11 @@
\
__high = __div >> 32; \
__low = __div; \
- __upper = __high; \
\
- if (__high) { \
+ if (__high < __radix) { \
+ __upper = __high; \
+ __high = 0; \
+ } else { \
__asm__("divu $0, %z1, %z2" \
: "=x" (__modquot) \
: "Jr" (__high), "Jr" (__radix)); \
From: Arnd Bergmann <[email protected]>
commit 5ee7d4c7fbc9d3119a20b1c77d34003d1f82ac26 upstream.
gcc-11 complains about a prototype declaration that is different
from the function definition:
drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
| ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
790 | u16 capi20_get_serial(u32 contr, u8 *serial)
| ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~
Change the definition to make them match.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/capi/kcapi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -845,7 +845,7 @@ EXPORT_SYMBOL(capi20_put_message);
* Return value: CAPI result code
*/
-u16 capi20_get_manufacturer(u32 contr, u8 *buf)
+u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN])
{
struct capi_ctr *ctr;
u16 ret;
@@ -915,7 +915,7 @@ EXPORT_SYMBOL(capi20_get_version);
* Return value: CAPI result code
*/
-u16 capi20_get_serial(u32 contr, u8 *serial)
+u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN])
{
struct capi_ctr *ctr;
u16 ret;
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit c99e755a4a4c165cad6effb39faffd0f3377c02d ]
In pci_scan_device(), if pci_setup_device() fails for any reason, the code
will not release device's of_node by calling pci_release_of_node(). Fix
that by calling the release function.
Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index becedabff141..63c62e2c8c0d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1668,6 +1668,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
pci_set_of_node(dev);
if (pci_setup_device(dev)) {
+ pci_release_of_node(dev);
pci_bus_put(dev->bus);
kfree(dev);
return NULL;
--
2.30.2
From: Johannes Berg <[email protected]>
[ Upstream commit d5027ca63e0e778b641cf23e3f5c6d6212cf412b ]
Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):
(gdb) bt
...
#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
#45 0x00007f8990968b85 in __getgrnam_r [...]
#46 0x00007f89909d6b77 in grantpt [...]
#47 0x00007f8990a9394e in __GI_openpty [...]
#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144
indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.
This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().
Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().
Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.
Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.
Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.
Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.
[1] https://bugs.debian.org/983379
Reported-by: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Tested-By: Ritesh Raj Sarraf <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/kernel/dyn.lds.S | 6 ++++++
arch/um/kernel/uml.lds.S | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index adde088aeeff..d837636ec823 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
ENTRY(_start)
jiffies = jiffies_64;
+VERSION {
+ {
+ local: *;
+ };
+}
+
SECTIONS
{
PROVIDE (__executable_start = START);
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 6899195602b7..09620aa953ca 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH)
ENTRY(_start)
jiffies = jiffies_64;
+VERSION {
+ {
+ local: *;
+ };
+}
+
SECTIONS
{
/* This must contain the right address - not quite the default ELF one.*/
--
2.30.2
From: Yonghong Song <[email protected]>
[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lib.mk | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 50a93f5f13d6..d8fa6c72b7ca 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -1,6 +1,10 @@
# This mimics the top-level Makefile. We do it explicitly here so that this
# Makefile can operate with or without the kbuild infrastructure.
+ifneq ($(LLVM),)
+CC := clang
+else
CC := $(CROSS_COMPILE)gcc
+endif
define RUN_TESTS
@for TEST in $(TEST_PROGS); do \
--
2.30.2
From: Eric Dumazet <[email protected]>
commit 6289a98f0817a4a457750d6345e754838eae9439 upstream.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Fixes: 919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -209,8 +209,6 @@ static int ipip6_tunnel_create(struct ne
dev->rtnl_link_ops = &sit_link_ops;
- dev_hold(dev);
-
ipip6_tunnel_link(sitn, t);
return 0;
@@ -1399,7 +1397,7 @@ static int ipip6_tunnel_init(struct net_
dev->tstats = NULL;
return err;
}
-
+ dev_hold(dev);
return 0;
}
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]
Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 pri; /* 8 1 */
u8 service_class; /* 9 1 */
struct {
u8 daddr[6]; /* 10 6 */
u8 saddr[6]; /* 16 6 */
} addr; /* 10 12 */
/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};
$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 reception; /* 8 1 */
u8 pri; /* 9 1 */
u8 service_class; /* 10 1 */
struct {
u8 daddr[6]; /* 11 6 */
u8 saddr[6]; /* 17 6 */
} addr; /* 11 12 */
/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};
The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 12 ++++++++----
drivers/net/wireless/wl3501_cs.c | 10 ++++++----
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 3fbfd19818f1..ba2a36cfb1c8 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -470,8 +470,10 @@ struct wl3501_md_req {
u16 size;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_ind {
@@ -483,8 +485,10 @@ struct wl3501_md_ind {
u8 reception;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_confirm {
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index d5c371d77ddf..15613f4761f4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -457,6 +457,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
struct wl3501_md_req sig = {
.sig_id = WL3501_SIG_MD_REQ,
};
+ size_t sig_addr_len = sizeof(sig.addr);
u8 *pdata = (char *)data;
int rc = -EIO;
@@ -472,9 +473,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
goto out;
}
rc = 0;
- memcpy(&sig.daddr[0], pdata, 12);
- pktlen = len - 12;
- pdata += 12;
+ memcpy(&sig.addr, pdata, sig_addr_len);
+ pktlen = len - sig_addr_len;
+ pdata += sig_addr_len;
sig.data = bf;
if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
u8 addr4[ETH_ALEN] = {
@@ -968,7 +969,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
} else {
skb->dev = dev;
skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
- skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
+ skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr,
+ sizeof(sig.addr));
wl3501_receive(this, skb->data, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, dev);
--
2.30.2
From: David Ward <[email protected]>
[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]
The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 63ed5b38b11f..146099ec8570 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -174,6 +174,9 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
case RT286_PROC_COEF:
case RT286_SET_AMP_GAIN_ADC_IN1:
case RT286_SET_AMP_GAIN_ADC_IN2:
+ case RT286_SET_GPIO_MASK:
+ case RT286_SET_GPIO_DIRECTION:
+ case RT286_SET_GPIO_DATA:
case RT286_SET_POWER(RT286_DAC_OUT1):
case RT286_SET_POWER(RT286_DAC_OUT2):
case RT286_SET_POWER(RT286_ADC_IN1):
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]
Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
u16 beacon_period; /* 0 2 */
u16 dtim_period; /* 2 2 */
u16 cap_info; /* 4 2 */
u8 bss_type; /* 6 1 */
u8 bssid[6]; /* 7 6 */
struct iw_mgmt_essid_pset ssid; /* 13 34 */
struct iw_mgmt_ds_pset ds_pset; /* 47 3 */
struct iw_mgmt_cf_pset cf_pset; /* 50 8 */
struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */
struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */
/* size: 72, cachelines: 2, members: 10 */
/* last cacheline: 8 bytes */
};
$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
struct iw_mgmt_data_rset operational_rset; /* 4 10 */
u16 reserved2; /* 14 2 */
u16 timeout; /* 16 2 */
u16 probe_delay; /* 18 2 */
u8 timestamp[8]; /* 20 8 */
u8 local_time[8]; /* 28 8 */
struct wl3501_req req; /* 36 72 */
/* size: 108, cachelines: 2, members: 10 */
/* last cacheline: 44 bytes */
};
$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
u16 status; /* 4 2 */
char timestamp[8]; /* 6 8 */
char localtime[8]; /* 14 8 */
struct wl3501_req req; /* 22 72 */
/* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
u8 rssi; /* 94 1 */
/* size: 96, cachelines: 2, members: 8 */
/* padding: 1 */
/* last cacheline: 32 bytes */
};
The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 35 +++++++++++--------------
drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++---------------
2 files changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index ba2a36cfb1c8..ca2021bcac14 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -378,16 +378,7 @@ struct wl3501_get_confirm {
u8 mib_value[100];
};
-struct wl3501_join_req {
- u16 next_blk;
- u8 sig_id;
- u8 reserved;
- struct iw_mgmt_data_rset operational_rset;
- u16 reserved2;
- u16 timeout;
- u16 probe_delay;
- u8 timestamp[8];
- u8 local_time[8];
+struct wl3501_req {
u16 beacon_period;
u16 dtim_period;
u16 cap_info;
@@ -400,6 +391,19 @@ struct wl3501_join_req {
struct iw_mgmt_data_rset bss_basic_rset;
};
+struct wl3501_join_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ struct iw_mgmt_data_rset operational_rset;
+ u16 reserved2;
+ u16 timeout;
+ u16 probe_delay;
+ u8 timestamp[8];
+ u8 local_time[8];
+ struct wl3501_req req;
+};
+
struct wl3501_join_confirm {
u16 next_blk;
u8 sig_id;
@@ -442,16 +446,7 @@ struct wl3501_scan_confirm {
u16 status;
char timestamp[8];
char localtime[8];
- u16 beacon_period;
- u16 dtim_period;
- u16 cap_info;
- u8 bss_type;
- u8 bssid[ETH_ALEN];
- struct iw_mgmt_essid_pset ssid;
- struct iw_mgmt_ds_pset ds_pset;
- struct iw_mgmt_cf_pset cf_pset;
- struct iw_mgmt_ibss_pset ibss_pset;
- struct iw_mgmt_data_rset bss_basic_rset;
+ struct wl3501_req req;
u8 rssi;
};
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 15613f4761f4..f91f7bd90b85 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -578,7 +578,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
struct wl3501_join_req sig = {
.sig_id = WL3501_SIG_JOIN_REQ,
.timeout = 10,
- .ds_pset = {
+ .req.ds_pset = {
.el = {
.id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
.len = 1,
@@ -587,7 +587,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
},
};
- memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+ memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req));
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -655,35 +655,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
if (sig.status == WL3501_STATUS_SUCCESS) {
pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
this->net_type == IW_MODE_AUTO) {
if (!this->essid.el.len)
matchflag = 1;
else if (this->essid.el.len == 3 &&
!memcmp(this->essid.essid, "ANY", 3))
matchflag = 1;
- else if (this->essid.el.len != sig.ssid.el.len)
+ else if (this->essid.el.len != sig.req.ssid.el.len)
matchflag = 0;
- else if (memcmp(this->essid.essid, sig.ssid.essid,
+ else if (memcmp(this->essid.essid, sig.req.ssid.essid,
this->essid.el.len))
matchflag = 0;
else
matchflag = 1;
if (matchflag) {
for (i = 0; i < this->bss_cnt; i++) {
- if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) {
+ if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid,
+ sig.req.bssid)) {
matchflag = 0;
break;
}
}
}
if (matchflag && (i < 20)) {
- memcpy(&this->bss_set[i].beacon_period,
- &sig.beacon_period, 73);
+ memcpy(&this->bss_set[i].req,
+ &sig.req, sizeof(sig.req));
this->bss_cnt++;
this->rssi = sig.rssi;
+ this->bss_set[i].rssi = sig.rssi;
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
@@ -875,19 +877,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
if (this->join_sta_bss < this->bss_cnt) {
const int i = this->join_sta_bss;
memcpy(this->bssid,
- this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_mgmt_auth(this);
}
} else {
const int i = this->join_sta_bss;
- memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_online(dev);
}
} else {
@@ -1566,30 +1568,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
for (i = 0; i < this->bss_cnt; ++i) {
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+ memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN);
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_ADDR_LEN);
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
- iwe.u.data.length = this->bss_set[i].ssid.el.len;
+ iwe.u.data.length = this->bss_set[i].req.ssid.el.len;
current_ev = iwe_stream_add_point(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe,
- this->bss_set[i].ssid.essid);
+ this->bss_set[i].req.ssid.essid);
iwe.cmd = SIOCGIWMODE;
- iwe.u.mode = this->bss_set[i].bss_type;
+ iwe.u.mode = this->bss_set[i].req.bss_type;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_UINT_LEN);
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+ iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan;
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_FREQ_LEN);
iwe.cmd = SIOCGIWENCODE;
- if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+ if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
--
2.30.2
From: Colin Ian King <[email protected]>
commit af0e1871d79cfbb91f732d2c6fa7558e45c31038 upstream.
The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.
Fixes clang scan-build warning:
drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]
Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
[iwamatsu: Change file path.]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/light/tsl2583.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -378,6 +378,15 @@ static int taos_als_calibrate(struct iio
dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
return lux_val;
}
+
+ /* Avoid division by zero of lux_value later on */
+ if (lux_val == 0) {
+ dev_err(&chip->client->dev,
+ "%s: lux_val of 0 will produce out of range trim_value\n",
+ __func__);
+ return -ENODATA;
+ }
+
gain_trim_val = (unsigned int) (((chip->taos_settings.als_cal_target)
* chip->taos_settings.als_gain_trim) / lux_val);
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 5581c2c5d02bc63a0edb53e061c8e97cd490646e ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-cadence.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 84deed6571bd..7d15c9143d16 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -894,7 +894,10 @@ static int cdns_i2c_probe(struct platform_device *pdev)
if (IS_ERR(id->membase))
return PTR_ERR(id->membase);
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.owner = THIS_MODULE;
id->adap.dev.of_node = pdev->dev.of_node;
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit c5e5f7a8d931fb4beba245bdbc94734175fda9de ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-jz4780.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index ba3b94505c14..d80cee068bea 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -754,7 +754,10 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
- i2c->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err;
+ i2c->irq = ret;
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret)
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit e701a25840360706fe4cf5de0015913ca19c274b ]
The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
index 912ee28ab58b..5da49e8b533b 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
@@ -528,7 +528,7 @@ static void nicvf_rcv_queue_config(struct nicvf *nic, struct queue_set *qs,
mbx.rq.msg = NIC_MBOX_MSG_RQ_CFG;
mbx.rq.qs_num = qs->vnic_id;
mbx.rq.rq_num = qidx;
- mbx.rq.cfg = (rq->caching << 26) | (rq->cq_qs << 19) |
+ mbx.rq.cfg = ((u64)rq->caching << 26) | (rq->cq_qs << 19) |
(rq->cq_idx << 16) | (rq->cont_rbdr_qs << 9) |
(rq->cont_qs_rbdr_idx << 8) |
(rq->start_rbdr_qs << 1) | (rq->start_qs_rbdr_idx);
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ]
Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true. If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.
Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.
Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt7601u/eeprom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.c b/drivers/net/wireless/mediatek/mt7601u/eeprom.c
index 8d8ee0344f7b..7b917c4613ad 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.c
@@ -106,7 +106,7 @@ mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom)
{
u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1);
- return ~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN);
+ return (u16)~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN);
}
static void
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-sh7760.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 24968384b401..70e4437060d5 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -471,7 +471,10 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
goto out2;
}
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.nr = pdev->id;
id->adap.algo = &sh7760_i2c_algo;
--
2.30.2
From: Stefano Garzarella <[email protected]>
[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.
VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:
qp_alloc_hypercall result = -20
Could not attach to queue pair with -20
"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.
Since the error message can be useful in some cases, print it only once.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <[email protected]>
Reviewed-by: Jorgen Hansen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/vmci_transport.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index 217810674c35..1f3f34b56840 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -593,8 +593,7 @@ vmci_transport_queue_pair_alloc(struct vmci_qp **qpair,
peer, flags, VMCI_NO_PRIVILEGE_FLAGS);
out:
if (err < 0) {
- pr_err("Could not attach to queue pair with %d\n",
- err);
+ pr_err_once("Could not attach to queue pair with %d\n", err);
err = vmci_transport_error_to_vsock_error(err);
}
--
2.30.2
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-plantronics.c | 60 +++++++++++++++++++++++++++++++++--
include/linux/hid.h | 2 ++
3 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 773452c6edfa..cbf13e993902 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -769,6 +769,7 @@
#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
#define USB_VENDOR_ID_PLANTRONICS 0x047f
+#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES 0xc056
#define USB_VENDOR_ID_PANASONIC 0x04da
#define USB_DEVICE_ID_PANABOARD_UBT780 0x1044
diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c
index 584b10d3fc3d..460711c1124a 100644
--- a/drivers/hid/hid-plantronics.c
+++ b/drivers/hid/hid-plantronics.c
@@ -16,6 +16,7 @@
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/jiffies.h>
#define PLT_HID_1_0_PAGE 0xffa00000
#define PLT_HID_2_0_PAGE 0xffa20000
@@ -39,6 +40,16 @@
#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \
(usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER)
+#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0)
+
+#define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */
+
+struct plt_drv_data {
+ unsigned long device_type;
+ unsigned long last_volume_key_ts;
+ u32 quirks;
+};
+
static int plantronics_input_mapping(struct hid_device *hdev,
struct hid_input *hi,
struct hid_field *field,
@@ -46,7 +57,8 @@ static int plantronics_input_mapping(struct hid_device *hdev,
unsigned long **bit, int *max)
{
unsigned short mapped_key;
- unsigned long plt_type = (unsigned long)hid_get_drvdata(hdev);
+ struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+ unsigned long plt_type = drv_data->device_type;
/* special case for PTT products */
if (field->application == HID_GD_JOYSTICK)
@@ -108,6 +120,30 @@ mapped:
return 1;
}
+static int plantronics_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+
+ if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) {
+ unsigned long prev_ts, cur_ts;
+
+ /* Usages are filtered in plantronics_usages. */
+
+ if (!value) /* Handle key presses only. */
+ return 0;
+
+ prev_ts = drv_data->last_volume_key_ts;
+ cur_ts = jiffies;
+ if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT)
+ return 1; /* Ignore the repeated key. */
+
+ drv_data->last_volume_key_ts = cur_ts;
+ }
+
+ return 0;
+}
+
static unsigned long plantronics_device_type(struct hid_device *hdev)
{
unsigned i, col_page;
@@ -136,15 +172,24 @@ exit:
static int plantronics_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
+ struct plt_drv_data *drv_data;
int ret;
+ drv_data = devm_kzalloc(&hdev->dev, sizeof(*drv_data), GFP_KERNEL);
+ if (!drv_data)
+ return -ENOMEM;
+
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
- hid_set_drvdata(hdev, (void *)plantronics_device_type(hdev));
+ drv_data->device_type = plantronics_device_type(hdev);
+ drv_data->quirks = id->driver_data;
+ drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+
+ hid_set_drvdata(hdev, drv_data);
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
HID_CONNECT_HIDINPUT_FORCE | HID_CONNECT_HIDDEV_FORCE);
@@ -156,15 +201,26 @@ err:
}
static const struct hid_device_id plantronics_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+ USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
+ .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(hid, plantronics_devices);
+static const struct hid_usage_id plantronics_usages[] = {
+ { HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID },
+ { HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID },
+ { HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR }
+};
+
static struct hid_driver plantronics_driver = {
.name = "plantronics",
.id_table = plantronics_devices,
+ .usage_table = plantronics_usages,
.input_mapping = plantronics_input_mapping,
+ .event = plantronics_event,
.probe = plantronics_probe,
};
module_hid_driver(plantronics_driver);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index d93ba6014e3c..19c53b64e07a 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -246,6 +246,8 @@ struct hid_item {
#define HID_CP_SELECTION 0x000c0080
#define HID_CP_MEDIASELECTION 0x000c0087
#define HID_CP_SELECTDISC 0x000c00ba
+#define HID_CP_VOLUMEUP 0x000c00e9
+#define HID_CP_VOLUMEDOWN 0x000c00ea
#define HID_CP_PLAYBACKSPEED 0x000c00f1
#define HID_CP_PROXIMITY 0x000c0109
#define HID_CP_SPEAKERSYSTEM 0x000c0160
--
2.30.2
From: Arnd Bergmann <[email protected]>
[ Upstream commit 0fa430e96d3c3561a78701f51fd8593da68b8474 ]
gcc-11 warns about the prototype not exactly matching the function
definition:
drivers/media/usb/dvb-usb/dvb-usb-remote.c:363:20: error: argument 2 of type ‘u8[5]’ {aka ‘unsigned char[5]’} with mismatched bound [-Werror=array-parameter=]
363 | u8 keybuf[5], u32 *event, int *state)
| ~~~^~~~~~~~~
In file included from drivers/media/usb/dvb-usb/dvb-usb-common.h:13,
from drivers/media/usb/dvb-usb/dvb-usb-remote.c:9:
drivers/media/usb/dvb-usb/dvb-usb.h:490:65: note: previously declared as ‘u8[]’ {aka ‘unsigned char[]’}
490 | extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
| ^~~~
Fixes: 776338e121b9 ("[PATCH] dvb: Add generalized dvb-usb driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dvb-usb.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index ce4c4e3b58bb..dd80b737d4da 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -466,7 +466,8 @@ extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int)
extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
/* commonly used remote control parsing */
-extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *);
+int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, u8 keybuf[5],
+ u32 *event, int *state);
/* commonly used firmware download types and function */
struct hexline {
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below). Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sni_53c710.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index b0f5220ae23a..fad68cb028d6 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -71,6 +71,7 @@ static int snirm710_probe(struct platform_device *dev)
struct NCR_700_Host_Parameters *hostdata;
struct Scsi_Host *host;
struct resource *res;
+ int rc;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res)
@@ -96,7 +97,9 @@ static int snirm710_probe(struct platform_device *dev)
goto out_kfree;
host->this_id = 7;
host->base = base;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = rc = platform_get_irq(dev, 0);
+ if (rc < 0)
+ goto out_put_host;
if(request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "snirm710", host)) {
printk(KERN_ERR "snirm710: request_irq failed!\n");
goto out_put_host;
--
2.30.2
From: Takashi Iwai <[email protected]>
commit cab561f8d4bc9b196ae20c960aa5da89fd786ab5 upstream.
Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5764,12 +5764,12 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101),
- SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
- SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", ALC275_FIXUP_SONY_DISABLE_AAMIX),
+ SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK),
SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT),
SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN),
From: Christophe Leroy <[email protected]>
[ Upstream commit 8a87a507714386efc39c3ae6fa24d4f79846b522 ]
AS arch/powerpc/platforms/52xx/lite5200_sleep.o
arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages:
arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression
In the following code, 'addi' is wrong, has to be 'add'
/* local udelay in sram is needed */
udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
addi r12, r13, r12 /* end */
Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/52xx/lite5200_sleep.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
index 08ab6fefcf7a..5f44e9223413 100644
--- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -180,7 +180,7 @@ sram_code:
udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
- addi r12, r13, r12 /* end */
+ add r12, r13, r12 /* end */
1:
mftb r13 /* current */
cmp cr0, r13, r12
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 926ee00ea24320052b46745ef4b00d91c05bd03d ]
The intent with this code was to return negative error codes but instead
it returns positives.
The problem is how type promotion works with ternary operations. These
functions return long, "ret" is an int and "copied" is a u32. The
negative error code is first cast to u32 so it becomes a high positive and
then cast to long where it's still a positive.
We could fix this by declaring "ret" as a ssize_t but let's just get rid
of the ternaries instead.
Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda
Fixes: 5bf2b19320ec ("kfifo: add example files to the kernel sample directory")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: Stefani Seibold <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/kfifo/bytestream-example.c | 8 ++++++--
samples/kfifo/inttype-example.c | 8 ++++++--
samples/kfifo/record-example.c | 8 ++++++--
3 files changed, 18 insertions(+), 6 deletions(-)
diff --git a/samples/kfifo/bytestream-example.c b/samples/kfifo/bytestream-example.c
index 2fca916d9edf..a7f5ee8b6edc 100644
--- a/samples/kfifo/bytestream-example.c
+++ b/samples/kfifo/bytestream-example.c
@@ -124,8 +124,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -140,8 +142,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct file_operations fifo_fops = {
diff --git a/samples/kfifo/inttype-example.c b/samples/kfifo/inttype-example.c
index 8dc3c2e7105a..a326a37e9163 100644
--- a/samples/kfifo/inttype-example.c
+++ b/samples/kfifo/inttype-example.c
@@ -117,8 +117,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -133,8 +135,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct file_operations fifo_fops = {
diff --git a/samples/kfifo/record-example.c b/samples/kfifo/record-example.c
index 2d7529eeb294..deb87a2e4e6b 100644
--- a/samples/kfifo/record-example.c
+++ b/samples/kfifo/record-example.c
@@ -131,8 +131,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -147,8 +149,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct file_operations fifo_fops = {
--
2.30.2
From: Hoang Le <[email protected]>
[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]
(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:
net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24: expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24: got int
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/netlink_compat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 0975a28f8686..fb1b5dcf0142 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -632,7 +632,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg,
nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL);
- link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]);
+ link_info.dest = htonl(nla_get_flag(link[TIPC_NLA_LINK_DEST]));
link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP]));
nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME],
TIPC_MAX_LINK_NAME);
--
2.30.2
From: Nikola Livic <[email protected]>
[ Upstream commit ed34695e15aba74f45247f1ee2cf7e09d449f925 ]
We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:
if (fh->size > sizeof(struct nfs_fh))
should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.
struct nfs_fh {
unsigned short size;
unsigned char data[NFS_MAXFHSIZE];
}
but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination. The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index 17771e157e92..e7f8732895b7 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -86,7 +86,7 @@ static int decode_nfs_fh(struct xdr_stream *xdr, struct nfs_fh *fh)
if (unlikely(!p))
return -ENOBUFS;
fh->size = be32_to_cpup(p++);
- if (fh->size > sizeof(struct nfs_fh)) {
+ if (fh->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS flexfiles: Too big fh received %d\n",
fh->size);
return -EOVERFLOW;
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 5c08b0f75575648032f309a6f58294453423ed93 ]
If some of the allocations fail between the dev_set_name() and the
device_register() then the name will not be freed. Fix this by
moving dev_set_name() directly in front of the call to device_register().
Fixes: a2aa24734d9d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hsi/hsi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c
index df380d55c58f..55e36fcd7ff3 100644
--- a/drivers/hsi/hsi.c
+++ b/drivers/hsi/hsi.c
@@ -223,8 +223,6 @@ static void hsi_add_client_from_dt(struct hsi_port *port,
if (err)
goto err;
- dev_set_name(&cl->device, "%s", name);
-
err = hsi_of_property_parse_mode(client, "hsi-mode", &mode);
if (err) {
err = hsi_of_property_parse_mode(client, "hsi-rx-mode",
@@ -307,6 +305,7 @@ static void hsi_add_client_from_dt(struct hsi_port *port,
cl->device.release = hsi_client_release;
cl->device.of_node = client;
+ dev_set_name(&cl->device, "%s", name);
if (device_register(&cl->device) < 0) {
pr_err("hsi: failed to register client: %s\n", name);
put_device(&cl->device);
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit c89a384e2551c692a9fe60d093fd7080f50afc51 ]
When removing rmap_item from stable tree, STABLE_FLAG of rmap_item is
cleared with head reserved. So the following scenario might happen: For
ksm page with rmap_item1:
cmp_and_merge_page
stable_node->head = &migrate_nodes;
remove_rmap_item_from_tree, but head still equal to stable_node;
try_to_merge_with_ksm_page failed;
return;
For the same ksm page with rmap_item2, stable node migration succeed this
time. The stable_node->head does not equal to migrate_nodes now. For ksm
page with rmap_item1 again:
cmp_and_merge_page
stable_node->head != &migrate_nodes && rmap_item->head == stable_node
return;
We would miss the rmap_item for stable_node and might result in failed
rmap_walk_ksm(). Fix this by set rmap_item->head to NULL when rmap_item
is removed from stable tree.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4146d2d673e8 ("ksm: make !merge_across_nodes migration safe")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/ksm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/ksm.c b/mm/ksm.c
index f51613052aee..cafe00dfdc3b 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -633,6 +633,7 @@ static void remove_rmap_item_from_tree(struct rmap_item *rmap_item)
ksm_pages_shared--;
put_anon_vma(rmap_item->anon_vma);
+ rmap_item->head = NULL;
rmap_item->address &= PAGE_MASK;
} else if (rmap_item->address & UNSTABLE_FLAG) {
--
2.30.2
From: Maximilian Luz <[email protected]>
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.
On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.
Cc: <[email protected]>
Signed-off-by: Maximilian Luz <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ext-caps.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -19,8 +19,9 @@
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16*1000)
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
/* HC not running - set to 1 when run/stop bit is cleared. */
#define XHCI_STS_HALT (1<<0)
From: Maciej W. Rozycki <[email protected]>
commit 193ced4a79599352d63cb8c9e2f0c6043106eb6a upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems. It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support. However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.
Make DEFXX_MMIO the configuration default then, except where configured
for EISA. This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core. Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.
The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.
Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: e89a2cfb7d7b ("[TC] defxx: TURBOchannel support")
Cc: [email protected] # v2.6.21+
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/fddi/Kconfig | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -28,17 +28,20 @@ config DEFXX
config DEFXX_MMIO
bool
- prompt "Use MMIO instead of PIO" if PCI || EISA
+ prompt "Use MMIO instead of IOP" if PCI || EISA
depends on DEFXX
- default n if PCI || EISA
+ default n if EISA
default y
---help---
This instructs the driver to use EISA or PCI memory-mapped I/O
- (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ (MMIO) as appropriate instead of programmed I/O ports (IOP).
Enabling this gives an improvement in processing time in parts
- of the driver, but it may cause problems with EISA (DEFEA)
- adapters. TURBOchannel does not have the concept of I/O ports,
- so MMIO is always used for these (DEFTA) adapters.
+ of the driver, but it requires a memory window to be configured
+ for EISA (DEFEA) adapters that may not always be available.
+ Conversely some PCIe host bridges do not support IOP, so MMIO
+ may be required to access PCI (DEFPA) adapters on downstream PCI
+ buses with some systems. TURBOchannel does not have the concept
+ of I/O ports, so MMIO is always used for these (DEFTA) adapters.
If unsure, say N.
From: Maciej W. Rozycki <[email protected]>
commit c49f71f60754acbff37505e1d16ca796bf8a8140 upstream.
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: [email protected] # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 57 ++++++++++++++++++++++++++++++------------
1 file changed, 41 insertions(+), 16 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2004 Maciej W. Rozycki
+ * Copyright (C) 2000, 2004, 2021 Maciej W. Rozycki
* Copyright (C) 2003, 07 Ralf Baechle ([email protected])
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,25 +9,18 @@
#ifndef __ASM_DIV64_H
#define __ASM_DIV64_H
-#include <asm-generic/div64.h>
-
-#if BITS_PER_LONG == 64
+#include <asm/bitsperlong.h>
-#include <linux/types.h>
+#if BITS_PER_LONG == 32
/*
* No traps on overflows for any of these...
*/
-#define __div64_32(n, base) \
-({ \
+#define do_div64_32(res, high, low, base) ({ \
unsigned long __cf, __tmp, __tmp2, __i; \
unsigned long __quot32, __mod32; \
- unsigned long __high, __low; \
- unsigned long long __n; \
\
- __high = *__n >> 32; \
- __low = __n; \
__asm__( \
" .set push \n" \
" .set noat \n" \
@@ -51,18 +44,50 @@
" subu %0, %0, %z6 \n" \
" addiu %2, %2, 1 \n" \
"3: \n" \
- " bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
+ " bnez %4, 0b \n" \
+ " srl %5, %1, 0x1f \n" \
" .set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (__high), "1" (__low)); \
+ : "Jr" (base), "0" (high), "1" (low)); \
\
- (__n) = __quot32; \
+ (res) = __quot32; \
__mod32; \
})
-#endif /* BITS_PER_LONG == 64 */
+#define __div64_32(n, base) ({ \
+ unsigned long __upper, __low, __high, __radix; \
+ unsigned long long __modquot; \
+ unsigned long long __quot; \
+ unsigned long long __div; \
+ unsigned long __mod; \
+ \
+ __div = (*n); \
+ __radix = (base); \
+ \
+ __high = __div >> 32; \
+ __low = __div; \
+ __upper = __high; \
+ \
+ if (__high) { \
+ __asm__("divu $0, %z1, %z2" \
+ : "=x" (__modquot) \
+ : "Jr" (__high), "Jr" (__radix)); \
+ __upper = __modquot >> 32; \
+ __high = __modquot; \
+ } \
+ \
+ __mod = do_div64_32(__low, __upper, __low, __radix); \
+ \
+ __quot = __high; \
+ __quot = __quot << 32 | __low; \
+ (*n) = __quot; \
+ __mod; \
+})
+
+#endif /* BITS_PER_LONG == 32 */
+
+#include <asm-generic/div64.h>
#endif /* __ASM_DIV64_H */
From: Maciej W. Rozycki <[email protected]>
commit 25ab14cbe9d1b66fda44c71a2db7582a31b6f5cd upstream.
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -58,7 +58,6 @@
#define __div64_32(n, base) ({ \
unsigned long __upper, __low, __high, __radix; \
- unsigned long long __modquot; \
unsigned long long __quot; \
unsigned long long __div; \
unsigned long __mod; \
@@ -73,11 +72,8 @@
__upper = __high; \
__high = 0; \
} else { \
- __asm__("divu $0, %z1, %z2" \
- : "=x" (__modquot) \
- : "Jr" (__high), "Jr" (__radix)); \
- __upper = __modquot >> 32; \
- __high = __modquot; \
+ __upper = __high % __radix; \
+ __high /= __radix; \
} \
\
__mod = do_div64_32(__low, __upper, __low, __radix); \
From: Mikulas Patocka <[email protected]>
commit 4edbe1d7bcffcd6269f3b5eb63f710393ff2ec7a upstream.
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
[iwamatsu: Adjust context]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -524,7 +524,7 @@ static int list_devices(struct dm_ioctl
* Grab our output buffer.
*/
nl = get_result_buffer(param, param_size, &len);
- if (len < needed) {
+ if (len < needed || len < sizeof(nl->dev)) {
param->flags |= DM_BUFFER_FULL_FLAG;
goto out;
}
From: Greg Kroah-Hartman <[email protected]>
commit b4104180a2efb85f55e1ba1407885c9421970338 upstream.
syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error. So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.
Link: https://lore.kernel.org/r/[email protected]
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/kobject_uevent.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -128,12 +128,13 @@ static int kobj_usermode_filter(struct k
static int init_uevent_argv(struct kobj_uevent_env *env, const char *subsystem)
{
+ int buffer_size = sizeof(env->buf) - env->buflen;
int len;
- len = strlcpy(&env->buf[env->buflen], subsystem,
- sizeof(env->buf) - env->buflen);
- if (len >= (sizeof(env->buf) - env->buflen)) {
- WARN(1, KERN_ERR "init_uevent_argv: buffer size too small\n");
+ len = strlcpy(&env->buf[env->buflen], subsystem, buffer_size);
+ if (len >= buffer_size) {
+ pr_warn("init_uevent_argv: buffer size of %d too small, needed %d\n",
+ buffer_size, len);
return -ENOMEM;
}
From: David Ward <[email protected]>
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index af2ed774b552..63ed5b38b11f 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -1117,12 +1117,11 @@ static const struct dmi_system_id force_combo_jack_table[] = {
{ }
};
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
{
- .ident = "Dell Dino",
+ .ident = "Dell",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
}
},
{ }
@@ -1133,7 +1132,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
{
struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt286_priv *rt286;
- int i, ret, val;
+ int i, ret, vendor_id;
rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286),
GFP_KERNEL);
@@ -1149,14 +1148,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
}
ret = regmap_read(rt286->regmap,
- RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+ RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
if (ret != 0) {
dev_err(&i2c->dev, "I2C error %d\n", ret);
return ret;
}
- if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+ if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
dev_err(&i2c->dev,
- "Device with ID register %#x is not rt286\n", val);
+ "Device with ID register %#x is not rt286\n",
+ vendor_id);
return -ENODEV;
}
@@ -1180,8 +1180,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt286->pdata = *pdata;
- if (dmi_check_system(force_combo_jack_table) ||
- dmi_check_system(dmi_dell_dino))
+ if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+ dmi_check_system(force_combo_jack_table))
rt286->pdata.cbj_en = true;
regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1220,7 +1220,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
- if (dmi_check_system(dmi_dell_dino)) {
+ if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
regmap_update_bits(rt286->regmap,
RT286_SET_GPIO_MASK, 0x40, 0x40);
regmap_update_bits(rt286->regmap,
--
2.30.2
From: Kaixu Xia <[email protected]>
commit ea8146c6845799142aa4ee2660741c215e340cdf upstream.
Fix the gcc warning:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation]
2673 | for (i = 0; i < n; ++i) \
Reported-by: Tosk Robot <[email protected]>
Signed-off-by: Kaixu Xia <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -2263,7 +2263,7 @@ do { \
seq_printf(seq, "%-12s", s); \
for (i = 0; i < n; ++i) \
seq_printf(seq, " %16" fmt_spec, v); \
- seq_putc(seq, '\n'); \
+ seq_putc(seq, '\n'); \
} while (0)
#define S(s, v) S3("s", s, v)
#define T3(fmt_spec, s, v) S3(fmt_spec, s, tx[i].v)
From: Ard Biesheuvel <[email protected]>
[ Upstream commit f9e7a99fb6b86aa6a00e53b34ee6973840e005aa ]
The cache invalidation code in v7_invalidate_l1 can be tweaked to
re-read the associativity from CCSIDR, and keep the way identifier
component in a single register that is assigned in the outer loop. This
way, we need 2 registers less.
Given that the number of sets is typically much larger than the
associativity, rearrange the code so that the outer loop has the fewer
number of iterations, ensuring that the re-read of CCSIDR only occurs a
handful of times in practice.
Fix the whitespace while at it, and update the comment to indicate that
this code is no longer a clone of anything else.
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/cache-v7.S | 51 +++++++++++++++++++++---------------------
1 file changed, 25 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 11d699af30ed..db568be45946 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -27,41 +27,40 @@
* processor. We fix this by performing an invalidate, rather than a
* clean + invalidate, before jumping into the kernel.
*
- * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.
+ * This function needs to be called for both secondary cores startup and
+ * primary core resume procedures.
*/
ENTRY(v7_invalidate_l1)
mov r0, #0
mcr p15, 2, r0, c0, c0, 0
mrc p15, 1, r0, c0, c0, 0
- movw r1, #0x7fff
- and r2, r1, r0, lsr #13
+ movw r3, #0x3ff
+ and r3, r3, r0, lsr #3 @ 'Associativity' in CCSIDR[12:3]
+ clz r1, r3 @ WayShift
+ mov r2, #1
+ mov r3, r3, lsl r1 @ NumWays-1 shifted into bits [31:...]
+ movs r1, r2, lsl r1 @ #1 shifted left by same amount
+ moveq r1, #1 @ r1 needs value > 0 even if only 1 way
- movw r1, #0x3ff
+ and r2, r0, #0x7
+ add r2, r2, #4 @ SetShift
- and r3, r1, r0, lsr #3 @ NumWays - 1
- add r2, r2, #1 @ NumSets
+1: movw r4, #0x7fff
+ and r0, r4, r0, lsr #13 @ 'NumSets' in CCSIDR[27:13]
- and r0, r0, #0x7
- add r0, r0, #4 @ SetShift
-
- clz r1, r3 @ WayShift
- add r4, r3, #1 @ NumWays
-1: sub r2, r2, #1 @ NumSets--
- mov r3, r4 @ Temp = NumWays
-2: subs r3, r3, #1 @ Temp--
- mov r5, r3, lsl r1
- mov r6, r2, lsl r0
- orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r5, c7, c6, 2
- bgt 2b
- cmp r2, #0
- bgt 1b
- dsb st
- isb
- ret lr
+2: mov r4, r0, lsl r2 @ NumSet << SetShift
+ orr r4, r4, r3 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r4, c7, c6, 2
+ subs r0, r0, #1 @ Set--
+ bpl 2b
+ subs r3, r3, r1 @ Way--
+ bcc 3f
+ mrc p15, 1, r0, c0, c0, 0 @ re-read cache geometry from CCSIDR
+ b 1b
+3: dsb st
+ isb
+ ret lr
ENDPROC(v7_invalidate_l1)
/*
--
2.30.2
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.
===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(p->lock)/1);
lock(&(p->lock)/1);
===
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 4c9b5970af37..282ad1930593 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1019,7 +1019,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
if (tbl->it_offset == 0)
clear_bit(0, tbl->it_map);
@@ -1048,7 +1048,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
memset(tbl->it_map, 0, sz);
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 9fdbfad1777cb4638f489eeb62d85432010c0031 ]
We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.
Fixes: f5062003465c ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index b15236641191..0d7b8c6e1de8 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1430,10 +1430,10 @@ EXPORT_SYMBOL_GPL(_nfs_display_fhandle);
*/
static int nfs_inode_attrs_need_update(const struct inode *inode, const struct nfs_fattr *fattr)
{
- const struct nfs_inode *nfsi = NFS_I(inode);
+ unsigned long attr_gencount = NFS_I(inode)->attr_gencount;
- return ((long)fattr->gencount - (long)nfsi->attr_gencount) > 0 ||
- ((long)nfsi->attr_gencount - (long)nfs_read_attr_generation_counter() > 0);
+ return (long)(fattr->gencount - attr_gencount) > 0 ||
+ (long)(attr_gencount - nfs_read_attr_generation_counter()) > 0;
}
/*
@@ -1849,7 +1849,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
nfsi->attrtimeo_timestamp = now;
}
/* Set the barrier to be more recent than this fattr */
- if ((long)fattr->gencount - (long)nfsi->attr_gencount > 0)
+ if ((long)(fattr->gencount - nfsi->attr_gencount) > 0)
nfsi->attr_gencount = fattr->gencount;
}
--
2.30.2
From: Eric Dumazet <[email protected]>
commit 48bb5697269a7cbe5194dbb044dc38c517e34c58 upstream.
Same reasons than for the previous commits :
6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
[1]
WARNING: CPU: 1 PID: 21059 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 21059 Comm: syz-executor.4 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900025aefe8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520004b5def
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888023488568
R13: ffff8880254e9000 R14: 00000000dfd82cfd R15: ffff88802ee2d7c0
FS: 00007f13bc590700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0943e74000 CR3: 0000000025273000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6_tnl_dev_uninit+0x370/0x3d0 net/ipv6/ip6_tunnel.c:387
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_tunnel.c:263
ip6_tnl_newlink+0x312/0x580 net/ipv6/ip6_tunnel.c:2052
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_tunnel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -261,7 +261,6 @@ static int ip6_tnl_create2(struct net_de
strcpy(t->parms.name, dev->name);
- dev_hold(dev);
ip6_tnl_link(ip6n, t);
return 0;
@@ -1581,6 +1580,7 @@ ip6_tnl_dev_init_gen(struct net_device *
return ret;
}
+ dev_hold(dev);
return 0;
}
From: Lukasz Luba <[email protected]>
commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.
The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.
CC: [email protected] # 4.4+
Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/fair_share.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/thermal/fair_share.c
+++ b/drivers/thermal/fair_share.c
@@ -93,6 +93,8 @@ static int fair_share_throttle(struct th
int total_instance = 0;
int cur_trip_level = get_trip_level(tz);
+ mutex_lock(&tz->lock);
+
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip)
continue;
@@ -119,6 +121,8 @@ static int fair_share_throttle(struct th
instance->cdev->updated = false;
thermal_cdev_update(cdev);
}
+
+ mutex_unlock(&tz->lock);
return 0;
}
From: Eric Dumazet <[email protected]>
commit 0d7a7b2014b1a499a0fe24c9f3063d7856b5aaaf upstream.
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 3 ---
net/ipv6/ip6_tunnel.c | 1 -
net/ipv6/ip6_vti.c | 1 -
net/ipv6/sit.c | 1 -
4 files changed, 6 deletions(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -350,7 +350,6 @@ static struct ip6_tnl *ip6gre_tunnel_loc
if (!(nt->parms.o_flags & GRE_SEQ))
dev->features |= NETIF_F_LLTX;
- dev_hold(dev);
ip6gre_tunnel_link(ign, nt);
return nt;
@@ -1310,8 +1309,6 @@ static void ip6gre_fb_tunnel_init(struct
strcpy(tunnel->parms.name, dev->name);
tunnel->hlen = sizeof(struct ipv6hdr) + 4;
-
- dev_hold(dev);
}
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1614,7 +1614,6 @@ static int __net_init ip6_fb_tnl_dev_ini
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
t->parms.proto = IPPROTO_IPV6;
- dev_hold(dev);
rcu_assign_pointer(ip6n->tnls_wc[0], t);
return 0;
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -931,7 +931,6 @@ static int __net_init vti6_fb_tnl_dev_in
struct vti6_net *ip6n = net_generic(net, vti6_net_id);
t->parms.proto = IPPROTO_IPV6;
- dev_hold(dev);
rcu_assign_pointer(ip6n->tnls_wc[0], t);
return 0;
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1413,7 +1413,6 @@ static void __net_init ipip6_fb_tunnel_i
iph->ihl = 5;
iph->ttl = 64;
- dev_hold(dev);
rcu_assign_pointer(sitn->tunnels_wc[0], tunnel);
}
From: Feilong Lin <[email protected]>
[ Upstream commit 3bbfd319034ddce59e023837a4aa11439460509b ]
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED
flag. When pci_get_slot() finds a device, it increments the device's
reference count. In this case, we did not call pci_dev_put() to decrement
the reference count, so the memory of the device (struct pci_dev type) will
eventually leak.
Call pci_dev_put() to decrement its reference count when pci_get_slot()
returns a PCI device.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Feilong Lin <[email protected]>
Signed-off-by: Zhiqiang Liu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/acpiphp_glue.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 6727471ea5b4..d0f5c526c8e6 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -538,6 +538,7 @@ static void enable_slot(struct acpiphp_slot *slot)
slot->flags &= (~SLOT_ENABLED);
continue;
}
+ pci_dev_put(dev);
}
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream.
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')
So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.
Be safe and pass the mem_flags to this function as well.
Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring")
Cc: <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[iwamatsu: Adjust context]
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1302,7 +1302,7 @@ static int xhci_configure_endpoint(struc
* we need to issue an evaluate context command and wait on it.
*/
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
- unsigned int ep_index, struct urb *urb)
+ unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
{
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
@@ -1333,7 +1333,7 @@ static int xhci_check_maxpacket(struct x
* changes max packet sizes.
*/
- command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ command = xhci_alloc_command(xhci, false, true, mem_flags);
if (!command)
return -ENOMEM;
@@ -1440,7 +1440,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd
*/
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
- ep_index, urb);
+ ep_index, urb, mem_flags);
if (ret < 0) {
xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
On 5/20/21 2:21 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.269 release.
> There are 190 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 22 May 2021 09:20:38 +0000.
> Anything received after that time might be too late.
>
All mips builds still fail.
Building mips:defconfig ... failed
--------------
Error log:
In file included from include/linux/kernel.h:136,
from include/asm-generic/bug.h:13,
from arch/mips/include/asm/bug.h:41,
from include/linux/bug.h:4,
from include/linux/page-flags.h:9,
from kernel/bounds.c:9:
arch/mips/include/asm/div64.h:59:30: error: expected identifier or '(' before '{' token
59 | #define __div64_32(n, base) ({ \
| ^
include/asm-generic/div64.h:35:17: note: in expansion of macro '__div64_32'
35 | extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
| ^~~~~~~~~~
It looks like the changes conflict with the code in include/asm-generic/div64.h.
That code is completely different in later kernel versions.
Guenter
Hi!
> This is the start of the stable review cycle for the 4.4.269 release.
> There are 190 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Thu, May 20, 2021 at 04:30:26AM -0700, Guenter Roeck wrote:
> On 5/20/21 2:21 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.269 release.
> > There are 190 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 22 May 2021 09:20:38 +0000.
> > Anything received after that time might be too late.
> >
>
> All mips builds still fail.
>
> Building mips:defconfig ... failed
> --------------
> Error log:
> In file included from include/linux/kernel.h:136,
> from include/asm-generic/bug.h:13,
> from arch/mips/include/asm/bug.h:41,
> from include/linux/bug.h:4,
> from include/linux/page-flags.h:9,
> from kernel/bounds.c:9:
> arch/mips/include/asm/div64.h:59:30: error: expected identifier or '(' before '{' token
> 59 | #define __div64_32(n, base) ({ \
> | ^
> include/asm-generic/div64.h:35:17: note: in expansion of macro '__div64_32'
> 35 | extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
> | ^~~~~~~~~~
>
> It looks like the changes conflict with the code in include/asm-generic/div64.h.
> That code is completely different in later kernel versions.
Now dropped.
thanks,
greg k-h
On 5/20/21 3:21 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.269 release.
> There are 190 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 22 May 2021 09:20:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.269-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah