This is the start of the stable review cycle for the 5.4.36 release.
There are 168 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 30 Apr 2020 18:21:07 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.36-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.36-rc1
Christian Borntraeger <[email protected]>
s390/mm: fix page table upgrade vs 2ndary address mode accesses
Arnd Bergmann <[email protected]>
compat: ARM64: always include asm-generic/compat.h
Christophe Leroy <[email protected]>
powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32
Michael Ellerman <[email protected]>
powerpc/kuap: PPC_KUAP_DEBUG should depend on PPC_KUAP
Michal Simek <[email protected]>
Revert "serial: uartps: Register own uart console and driver structures"
Michal Simek <[email protected]>
Revert "serial: uartps: Move Port ID to device data structure"
Michal Simek <[email protected]>
Revert "serial: uartps: Change uart ID port allocation"
Michal Simek <[email protected]>
Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"
Michal Simek <[email protected]>
Revert "serial: uartps: Fix error path when alloc failed"
Michal Simek <[email protected]>
Revert "serial: uartps: Use the same dynamic major number for all ports"
Michal Simek <[email protected]>
Revert "serial: uartps: Fix uartps_major handling"
Kazuhiro Fujita <[email protected]>
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
Mathias Nyman <[email protected]>
xhci: Don't clear hub TT buffer on ep0 protocol stall
Mathias Nyman <[email protected]>
xhci: prevent bus suspend if a roothub port detected a over-current condition
Mathias Nyman <[email protected]>
xhci: Fix handling halted endpoint even if endpoint ring appears empty
Naoki Kiryu <[email protected]>
usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
Badhri Jagan Sridharan <[email protected]>
usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
Udipto Goswami <[email protected]>
usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Fix request completion check
Xu Yilun <[email protected]>
fpga: dfl: pci: fix return value of cci_pci_sriov_configure
Oliver Neukum <[email protected]>
UAS: fix deadlock in error handling and PM flushing work
Oliver Neukum <[email protected]>
UAS: no use logging any details in case of ENODEV
Oliver Neukum <[email protected]>
cdc-acm: introduce a cool down
Oliver Neukum <[email protected]>
cdc-acm: close race betrween suspend() and acm_softint
Malcolm Priestley <[email protected]>
staging: vt6656: Power save stop wake_up_count wrap around.
Malcolm Priestley <[email protected]>
staging: vt6656: Fix pairwise key entry save.
Malcolm Priestley <[email protected]>
staging: vt6656: Fix drivers TBTT timing counter.
Malcolm Priestley <[email protected]>
staging: vt6656: Fix calling conditions of vnt_set_bss_mode
Malcolm Priestley <[email protected]>
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.
Nicolas Pitre <[email protected]>
vt: don't use kmalloc() for the unicode screen buffer
Nicolas Pitre <[email protected]>
vt: don't hardcode the mem allocation upper bound
Xiyu Yang <[email protected]>
staging: comedi: Fix comedi_device refcnt leak in comedi_open
Ian Abbott <[email protected]>
staging: comedi: dt2815: fix writing hi byte of analog output
Chris Packham <[email protected]>
powerpc/setup_64: Set cache-line-size based on cache-block-size
Ahmad Fatoum <[email protected]>
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
Paulo Alcantara <[email protected]>
cifs: fix uninitialised lease_key in open_shroot()
Johannes Berg <[email protected]>
iwlwifi: mvm: fix inactive TID removal return value usage
Ilan Peer <[email protected]>
iwlwifi: mvm: Do not declare support for ACK Enabled Aggregation
Johannes Berg <[email protected]>
iwlwifi: mvm: limit maximum queue appropriately
Mordechay Goodstein <[email protected]>
iwlwifi: mvm: beacon statistics shouldn't go backwards
Johannes Berg <[email protected]>
iwlwifi: pcie: actually release queue memory in TVQM
Chuck Lever <[email protected]>
SUNRPC: Fix backchannel RPC soft lockups
Johannes Berg <[email protected]>
mac80211: populate debugfs only after cfg80211 init
Gyeongtaek Lee <[email protected]>
ASoC: dapm: fixup dapm kcontrol widget
Paul Moore <[email protected]>
audit: check the length of userspace generated audit records
Eric W. Biederman <[email protected]>
signal: Avoid corrupting si_pid and si_uid in do_notify_parent
Alan Stern <[email protected]>
usb-storage: Add unusual_devs entry for JMicron JMS566
Jiri Slaby <[email protected]>
tty: rocket, avoid OOB access
Andrew Melnychenko <[email protected]>
tty: hvc: fix buffer overflow during hvc_alloc().
Uros Bizjak <[email protected]>
KVM: VMX: Enable machine check support for 32bit targets
Sean Christopherson <[email protected]>
KVM: Check validity of resolved slot when searching memslots
Sean Christopherson <[email protected]>
KVM: s390: Return last valid slot if approx index is out-of-bounds
George Wilson <[email protected]>
tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()
Tianjia Zhang <[email protected]>
tpm: fix wrong return value in tpm_pcr_extend
Jarkko Sakkinen <[email protected]>
tpm/tpm_tis: Free IRQ if probing fails
Alexander Tsoy <[email protected]>
ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices
Xiyu Yang <[email protected]>
ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif
Takashi Iwai <[email protected]>
ALSA: hda/hdmi: Add module option to disable audio component binding
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add new codec supported for ALC245
Takashi Iwai <[email protected]>
ALSA: hda/realtek - Fix unexpected init_amp override
Takashi Iwai <[email protected]>
ALSA: usx2y: Fix potential NULL dereference
Lucas Stach <[email protected]>
tools/vm: fix cross-compile build
Muchun Song <[email protected]>
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
Longpeng <[email protected]>
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
Sudip Mukherjee <[email protected]>
coredump: fix null pointer dereference on coredump
Luis Mendes <[email protected]>
staging: gasket: Fix incongruency in handling of sysfs entries creation
Jann Horn <[email protected]>
vmalloc: fix remap_vmalloc_range() bounds checks
Amit Singh Tomar <[email protected]>
tty: serial: owl: add "much needed" clk_prepare_enable()
Alan Stern <[email protected]>
USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
Alan Stern <[email protected]>
USB: hub: Fix handling of connect changes during sleep
Alan Stern <[email protected]>
USB: core: Fix free-while-in-use bug in the USB S-Glibrary
Jann Horn <[email protected]>
USB: early: Handle AMD's spec-compliant identifiers, too
Jonathan Cox <[email protected]>
USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
Changming Liu <[email protected]>
USB: sisusbvga: Change port variable from signed to unsigned
Lars-Peter Clausen <[email protected]>
iio: xilinx-xadc: Make sure not exceed maximum samplerate
Lars-Peter Clausen <[email protected]>
iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
Lars-Peter Clausen <[email protected]>
iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
Lars-Peter Clausen <[email protected]>
iio: xilinx-xadc: Fix ADC-B powerdown
Alexandre Belloni <[email protected]>
iio: adc: ti-ads8344: properly byte swap value
Olivier Moysan <[email protected]>
iio: adc: stm32-adc: fix sleep in atomic context
Lary Gibaud <[email protected]>
iio: st_sensors: rely on odr mask to know if odr can be set
Lars Engebretsen <[email protected]>
iio: core: remove extra semi-colon from devm_iio_device_register() macro
Takashi Iwai <[email protected]>
ALSA: usb-audio: Add connector notifier delegation
Takashi Iwai <[email protected]>
ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos
Takashi Iwai <[email protected]>
ALSA: hda: Remove ASUS ROG Zenith from the blacklist
Waiman Long <[email protected]>
KEYS: Avoid false positive ENOMEM error on key read
David Ahern <[email protected]>
vrf: Check skb for XFRM_TRANSFORMED flag
David Ahern <[email protected]>
xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish
Sabrina Dubroca <[email protected]>
geneve: use the correct nlattr array in NL_SET_ERR_MSG_ATTR
Sabrina Dubroca <[email protected]>
vxlan: use the correct nlattr array in NL_SET_ERR_MSG_ATTR
Florian Fainelli <[email protected]>
net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVL
Florian Fainelli <[email protected]>
net: dsa: b53: Rework ARL bin logic
Florian Fainelli <[email protected]>
net: dsa: b53: Fix ARL register definitions
Florian Fainelli <[email protected]>
net: dsa: b53: Fix valid setting for MDB entries
Florian Fainelli <[email protected]>
net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled
David Ahern <[email protected]>
vrf: Fix IPv6 with qdisc and xfrm
Taehee Yoo <[email protected]>
team: fix hang in team_mode_get()
Eric Dumazet <[email protected]>
tcp: cache line align MAX_TCP_HEADER
David Ahern <[email protected]>
selftests: Fix suppress test in fib_tests.sh
Eric Dumazet <[email protected]>
sched: etf: do not assume all sockets are full blown
Xiyu Yang <[email protected]>
net/x25: Fix x25_neigh refcnt leak when receiving frame
Marc Zyngier <[email protected]>
net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array
Tonghao Zhang <[email protected]>
net: openvswitch: ovs_ct_exit to be done under ovs_lock
Xiyu Yang <[email protected]>
net: netrom: Fix potential nr_neigh refcnt leak in nr_add_node
Eric Dumazet <[email protected]>
net/mlx4_en: avoid indirect call in TX completion
Doug Berger <[email protected]>
net: bcmgenet: correct per TX/RX ring statistics
Dan Carpenter <[email protected]>
mlxsw: Fix some IS_ERR() vs NULL bugs
Taehee Yoo <[email protected]>
macvlan: fix null dereference in macvlan_device_event()
Taehee Yoo <[email protected]>
macsec: avoid to set wrong mtu
John Haxby <[email protected]>
ipv6: fix restrict IPV6_ADDRFORM operation
David Ahern <[email protected]>
ipv4: Update fib_select_default to handle nexthop objects
Rahul Lakkireddy <[email protected]>
cxgb4: fix large delays in PTP synchronization
Vishal Kulkarni <[email protected]>
cxgb4: fix adapter crash due to wrong MC size
Mika Westerberg <[email protected]>
PCI/PM: Add missing link delays required by the PCIe spec
Heiner Kallweit <[email protected]>
PCI/ASPM: Allow re-enabling Clock PM
Kevin Barnett <[email protected]>
scsi: smartpqi: fix problem with unique ID for physical device
Murthy Bhat <[email protected]>
scsi: smartpqi: fix call trace in device discovery
Kevin Barnett <[email protected]>
scsi: smartpqi: fix controller lockup observed during force reboot
Halil Pasic <[email protected]>
virtio-blk: improve virtqueue error to BLK_STS
Steven Rostedt (VMware) <[email protected]>
tracing/selftests: Turn off timeout setting
Kai Vehmanen <[email protected]>
ASoC: SOF: trace: fix unconditional free in trace release
Mika Westerberg <[email protected]>
PCI: pciehp: Prevent deadlock on disconnect
Aurelien Jarno <[email protected]>
libbpf: Fix readelf output parsing on powerpc with recent binutils
Mika Westerberg <[email protected]>
PCI/PM: Add pcie_wait_for_link_delay()
Yongqiang Sun <[email protected]>
drm/amd/display: Not doing optimize bandwidth if flip pending.
Mathias Nyman <[email protected]>
xhci: Finetune host initiated USB3 rootport link suspend and resume
Kai-Heng Feng <[email protected]>
xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0
Kai-Heng Feng <[email protected]>
xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3
František Kučera <[email protected]>
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
Nicholas Kazlauskas <[email protected]>
drm/amd/display: Calculate scaling ratios on every medium/full update
Jiri Olsa <[email protected]>
perf/core: Disable page faults when getting phys address
Florian Fainelli <[email protected]>
pwm: bcm2835: Dynamically allocate base
Geert Uytterhoeven <[email protected]>
pwm: renesas-tpu: Fix late Runtime PM enablement
Nick Bowler <[email protected]>
nvme: fix compat address handling in several ioctls
Ganesh Goudar <[email protected]>
powerpc/pseries: Fix MCE handling on pseries
Nicholas Piggin <[email protected]>
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
Evan Green <[email protected]>
loop: Better discard support for block devices
Cornelia Huck <[email protected]>
s390/cio: avoid duplicated 'ADD' uevents
Cornelia Huck <[email protected]>
s390/cio: generate delayed uevent for vfio-ccw subchannels
Masahiro Yamada <[email protected]>
lib/raid6/test: fix build on distros whose /bin/sh is not bash
Mauro Carvalho Chehab <[email protected]>
kconfig: qconf: Fix a few alignment issues
Vasily Averin <[email protected]>
ipc/util.c: sysvipc_find_ipc() should increase position index
Eric Biggers <[email protected]>
selftests: kmod: fix handling test numbers above 9
Vasily Averin <[email protected]>
kernel/gcov/fs.c: gcov_seq_next() should increase position index
Kishon Vijay Abraham I <[email protected]>
dma-direct: fix data truncation in dma_direct_get_required_mask()
Isabel Zhang <[email protected]>
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
Sagi Grimberg <[email protected]>
nvme: fix deadlock caused by ANA update wrong locking
Hans de Goede <[email protected]>
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
Santosh Sivaraj <[email protected]>
tools/test/nvdimm: Fix out of tree build
Wu Bo <[email protected]>
scsi: iscsi: Report unbind session event when the target has been removed
Sagi Grimberg <[email protected]>
nvme-tcp: fix possible crash in write_zeroes processing
Geert Uytterhoeven <[email protected]>
pwm: rcar: Fix late Runtime PM enablement
Yan, Zheng <[email protected]>
ceph: don't skip updating wanted caps when cap is stale
Qiujun Huang <[email protected]>
ceph: return ceph_mdsc_do_request() errors from __get_parent()
Javed Hasan <[email protected]>
scsi: libfc: If PRLI rejected, move rport to PLOGI state
James Smart <[email protected]>
scsi: lpfc: Fix crash in target side cable pulls hitting WAIT_FOR_UNREG
James Smart <[email protected]>
scsi: lpfc: Fix crash after handling a pci error
James Smart <[email protected]>
scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login
Tero Kristo <[email protected]>
watchdog: reset last_hw_keepalive time at start
Jan Kara <[email protected]>
tools/testing/nvdimm: Fix compilation failure without CONFIG_DEV_DAX_PMEM_COMPAT
Catalin Marinas <[email protected]>
arm64: Silence clang warning on mismatched value/register sizes
James Morse <[email protected]>
arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space
James Morse <[email protected]>
arm64: Fake the IminLine size on systems affected by Neoverse-N1 #1542419
James Morse <[email protected]>
arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419
William Dauchy <[email protected]>
net, ip_tunnel: fix interface lookup with no key
Randall Huang <[email protected]>
f2fs: fix to avoid memory leakage in f2fs_listxattr
Dmitry Monakhov <[email protected]>
ext4: fix extent_status fragmentation for plain files
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 3 +-
Documentation/arm64/silicon-errata.rst | 2 +
Makefile | 4 +-
arch/arm/mach-imx/Makefile | 2 +
arch/arm64/Kconfig | 16 ++
arch/arm64/include/asm/cache.h | 3 +-
arch/arm64/include/asm/compat.h | 5 +-
arch/arm64/include/asm/cpucaps.h | 3 +-
arch/arm64/kernel/cpu_errata.c | 32 ++-
arch/arm64/kernel/sys_compat.c | 11 +
arch/arm64/kernel/traps.c | 9 +
arch/powerpc/kernel/entry_32.S | 2 +-
arch/powerpc/kernel/setup_64.c | 2 +
arch/powerpc/kernel/time.c | 44 ++--
arch/powerpc/platforms/Kconfig.cputype | 2 +-
arch/powerpc/platforms/pseries/ras.c | 11 +
arch/s390/kvm/kvm-s390.c | 3 +
arch/s390/lib/uaccess.c | 4 +
arch/s390/mm/pgalloc.c | 16 +-
arch/x86/kvm/vmx/vmx.c | 2 +-
drivers/block/loop.c | 42 +++-
drivers/block/virtio_blk.c | 9 +-
drivers/char/tpm/tpm-interface.c | 2 +-
drivers/char/tpm/tpm_ibmvtpm.c | 136 +++++++------
drivers/char/tpm/tpm_tis_core.c | 8 +-
drivers/fpga/dfl-pci.c | 6 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 38 +++-
drivers/iio/adc/stm32-adc.c | 31 ++-
drivers/iio/adc/ti-ads8344.c | 6 +-
drivers/iio/adc/xilinx-xadc-core.c | 95 +++++++--
drivers/iio/common/st_sensors/st_sensors_core.c | 2 +-
drivers/net/dsa/b53/b53_common.c | 38 +++-
drivers/net/dsa/b53/b53_regs.h | 8 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +
drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 27 ++-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 27 +--
drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 3 +
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 14 +-
.../mellanox/mlxsw/core_acl_flex_actions.c | 4 +-
.../ethernet/mellanox/mlxsw/spectrum2_acl_tcam.c | 4 +-
drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c | 2 +-
.../net/ethernet/mellanox/mlxsw/spectrum_mr_tcam.c | 4 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 1 +
drivers/net/geneve.c | 2 +-
drivers/net/macsec.c | 12 +-
drivers/net/macvlan.c | 2 +-
drivers/net/team/team.c | 4 +
drivers/net/vrf.c | 10 +-
drivers/net/vxlan.c | 6 +-
drivers/net/wireless/intel/iwlegacy/3945-rs.c | 2 +-
drivers/net/wireless/intel/iwlegacy/4965-rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/dvm/rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/fw/api/txq.h | 6 +-
drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 6 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 13 +-
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 9 +-
drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 3 +
drivers/net/wireless/realtek/rtlwifi/rc.c | 2 +-
drivers/nvme/host/core.c | 27 ++-
drivers/nvme/host/multipath.c | 4 +-
drivers/nvme/host/tcp.c | 13 +-
drivers/pci/hotplug/pciehp.h | 6 +-
drivers/pci/hotplug/pciehp_core.c | 11 +-
drivers/pci/hotplug/pciehp_ctrl.c | 4 +-
drivers/pci/hotplug/pciehp_hpc.c | 59 +++++-
drivers/pci/pci-driver.c | 11 +-
drivers/pci/pci.c | 142 ++++++++++++-
drivers/pci/pci.h | 1 +
drivers/pci/pcie/aspm.c | 18 +-
drivers/pwm/pwm-bcm2835.c | 1 +
drivers/pwm/pwm-rcar.c | 10 +-
drivers/pwm/pwm-renesas-tpu.c | 9 +-
drivers/s390/cio/device.c | 13 +-
drivers/s390/cio/vfio_ccw_drv.c | 5 +
drivers/scsi/libfc/fc_rport.c | 8 +-
drivers/scsi/lpfc/lpfc_nvme.c | 14 +-
drivers/scsi/lpfc/lpfc_sli.c | 7 +
drivers/scsi/scsi_transport_iscsi.c | 4 +-
drivers/scsi/smartpqi/smartpqi.h | 10 +-
drivers/scsi/smartpqi/smartpqi_init.c | 225 +++++++++++----------
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 2 +-
drivers/staging/comedi/comedi_fops.c | 4 +-
drivers/staging/comedi/drivers/dt2815.c | 3 +
drivers/staging/gasket/gasket_sysfs.c | 3 +-
drivers/staging/gasket/gasket_sysfs.h | 4 -
drivers/staging/vt6656/int.c | 3 +-
drivers/staging/vt6656/key.c | 14 +-
drivers/staging/vt6656/main_usb.c | 31 +--
drivers/tty/hvc/hvc_console.c | 23 ++-
drivers/tty/rocket.c | 25 ++-
drivers/tty/serial/owl-uart.c | 7 +
drivers/tty/serial/sh-sci.c | 13 +-
drivers/tty/serial/xilinx_uartps.c | 211 +++++--------------
drivers/tty/vt/vt.c | 7 +-
drivers/usb/class/cdc-acm.c | 36 +++-
drivers/usb/class/cdc-acm.h | 5 +-
drivers/usb/core/hub.c | 18 +-
drivers/usb/core/message.c | 9 +-
drivers/usb/core/quirks.c | 4 +
drivers/usb/dwc3/gadget.c | 12 +-
drivers/usb/early/xhci-dbc.c | 8 +-
drivers/usb/early/xhci-dbc.h | 18 +-
drivers/usb/gadget/function/f_fs.c | 4 +
drivers/usb/host/xhci-hub.c | 70 ++++++-
drivers/usb/host/xhci-mem.c | 1 +
drivers/usb/host/xhci-ring.c | 47 ++++-
drivers/usb/host/xhci.c | 14 +-
drivers/usb/host/xhci.h | 6 +-
drivers/usb/misc/sisusbvga/sisusb.c | 20 +-
drivers/usb/misc/sisusbvga/sisusb_init.h | 14 +-
drivers/usb/storage/uas.c | 46 ++++-
drivers/usb/storage/unusual_devs.h | 7 +
drivers/usb/typec/bus.c | 5 +-
drivers/usb/typec/tcpm/tcpm.c | 26 +++
drivers/watchdog/watchdog_dev.c | 1 +
fs/ceph/caps.c | 8 +-
fs/ceph/export.c | 5 +
fs/cifs/smb2ops.c | 5 +
fs/coredump.c | 2 +
fs/ext4/extents.c | 47 +++--
fs/f2fs/xattr.c | 14 +-
fs/nfsd/nfs4callback.c | 4 +-
fs/proc/vmcore.c | 5 +-
include/linux/iio/iio.h | 2 +-
include/linux/kvm_host.h | 2 +-
include/linux/vmalloc.h | 2 +-
include/net/mac80211.h | 4 +-
include/net/tcp.h | 2 +-
ipc/util.c | 2 +-
kernel/audit.c | 3 +
kernel/dma/direct.c | 3 +-
kernel/events/core.c | 9 +-
kernel/gcov/fs.c | 2 +-
kernel/signal.c | 6 +-
lib/raid6/test/Makefile | 6 +-
mm/hugetlb.c | 14 +-
mm/ksm.c | 12 +-
mm/vmalloc.c | 16 +-
net/ipv4/fib_semantics.c | 6 +-
net/ipv4/ip_tunnel.c | 6 +-
net/ipv4/xfrm4_output.c | 2 -
net/ipv6/ipv6_sockglue.c | 13 +-
net/ipv6/xfrm6_output.c | 2 -
net/mac80211/main.c | 5 +-
net/mac80211/rate.c | 15 +-
net/mac80211/rate.h | 23 +++
net/mac80211/rc80211_minstrel_ht.c | 19 +-
net/netrom/nr_route.c | 1 +
net/openvswitch/conntrack.c | 3 +-
net/openvswitch/datapath.c | 4 +-
net/sched/sch_etf.c | 7 +-
net/sunrpc/svc_xprt.c | 2 +
net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 2 +
net/sunrpc/xprtsock.c | 1 +
net/x25/x25_dev.c | 4 +-
samples/vfio-mdev/mdpy.c | 2 +-
scripts/kconfig/qconf.cc | 13 +-
security/keys/internal.h | 12 ++
security/keys/keyctl.c | 58 ++++--
sound/pci/hda/hda_intel.c | 1 -
sound/pci/hda/patch_hdmi.c | 9 +
sound/pci/hda/patch_realtek.c | 11 +-
sound/soc/intel/atom/sst-atom-controls.c | 2 +
sound/soc/intel/boards/bytcr_rt5640.c | 11 +
sound/soc/soc-dapm.c | 20 +-
sound/soc/sof/trace.c | 7 +-
sound/usb/format.c | 52 +++++
sound/usb/mixer.c | 37 +++-
sound/usb/mixer.h | 10 +
sound/usb/mixer_maps.c | 37 +++-
sound/usb/mixer_quirks.c | 12 +-
sound/usb/quirks-table.h | 56 +++++
sound/usb/usx2y/usbusx2yaudio.c | 2 +
tools/lib/bpf/Makefile | 4 +-
tools/testing/nvdimm/Kbuild | 4 +-
tools/testing/nvdimm/test/Kbuild | 4 +-
tools/testing/nvdimm/test/nfit.c | 2 +
tools/testing/selftests/ftrace/settings | 1 +
tools/testing/selftests/kmod/kmod.sh | 13 +-
tools/testing/selftests/net/fib_nexthops.sh | 23 +++
tools/testing/selftests/net/fib_tests.sh | 10 +-
tools/vm/Makefile | 2 +
183 files changed, 1953 insertions(+), 844 deletions(-)
From: Tero Kristo <[email protected]>
[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ]
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Signed-off-by: Tero Kristo <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/watchdog_dev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index ce04edc69e5f0..c4147e93aa7d4 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -282,6 +282,7 @@ static int watchdog_start(struct watchdog_device *wdd)
if (err == 0) {
set_bit(WDOG_ACTIVE, &wdd->status);
wd_data->last_keepalive = started_at;
+ wd_data->last_hw_keepalive = started_at;
watchdog_update_worker(wdd);
}
--
2.20.1
From: Catalin Marinas <[email protected]>
[ Upstream commit: 27a22fbdeedd6c5c451cf5f830d51782bf50c3a2 ]
Clang reports a warning on the __tlbi(aside1is, 0) macro expansion since
the value size does not match the register size specified in the inline
asm. Construct the ASID value using the __TLBI_VADDR() macro.
Fixes: 222fc0c8503d ("arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space")
Reported-by: Nathan Chancellor <[email protected]>
Cc: James Morse <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/sys_compat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index c9fb02927d3e5..3c18c2454089b 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -37,7 +37,7 @@ __do_compat_cache_op(unsigned long start, unsigned long end)
* The workaround requires an inner-shareable tlbi.
* We pick the reserved-ASID to minimise the impact.
*/
- __tlbi(aside1is, 0);
+ __tlbi(aside1is, __TLBI_VADDR(0, 0));
dsb(ish);
}
--
2.20.1
From: Santosh Sivaraj <[email protected]>
[ Upstream commit 1f776799628139d0da47e710ad86eb58d987ff66 ]
Out of tree build using
make M=tools/test/nvdimm O=/tmp/build -C /tmp/build
fails with the following error
make: Entering directory '/tmp/build'
CC [M] tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
19 | #include <nd-core.h>
| ^~~~~~~~~~~
compilation terminated.
That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.
Reported-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Santosh Sivaraj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/nvdimm/Kbuild | 4 ++--
tools/testing/nvdimm/test/Kbuild | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/nvdimm/Kbuild b/tools/testing/nvdimm/Kbuild
index c4a9196d794c9..cb80d3b811792 100644
--- a/tools/testing/nvdimm/Kbuild
+++ b/tools/testing/nvdimm/Kbuild
@@ -21,8 +21,8 @@ DRIVERS := ../../../drivers
NVDIMM_SRC := $(DRIVERS)/nvdimm
ACPI_SRC := $(DRIVERS)/acpi/nfit
DAX_SRC := $(DRIVERS)/dax
-ccflags-y := -I$(src)/$(NVDIMM_SRC)/
-ccflags-y += -I$(src)/$(ACPI_SRC)/
+ccflags-y := -I$(srctree)/drivers/nvdimm/
+ccflags-y += -I$(srctree)/drivers/acpi/nfit/
obj-$(CONFIG_LIBNVDIMM) += libnvdimm.o
obj-$(CONFIG_BLK_DEV_PMEM) += nd_pmem.o
diff --git a/tools/testing/nvdimm/test/Kbuild b/tools/testing/nvdimm/test/Kbuild
index fb3c3d7cdb9bd..75baebf8f4ba1 100644
--- a/tools/testing/nvdimm/test/Kbuild
+++ b/tools/testing/nvdimm/test/Kbuild
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-ccflags-y := -I$(src)/../../../../drivers/nvdimm/
-ccflags-y += -I$(src)/../../../../drivers/acpi/nfit/
+ccflags-y := -I$(srctree)/drivers/nvdimm/
+ccflags-y += -I$(srctree)/drivers/acpi/nfit/
obj-m += nfit_test.o
obj-m += nfit_test_iomap.o
--
2.20.1
From: Randall Huang <[email protected]>
commit 688078e7f36c293dae25b338ddc9e0a2790f6e06 upstream.
In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.
Signed-off-by: Randall Huang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/xattr.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/fs/f2fs/xattr.c
+++ b/fs/f2fs/xattr.c
@@ -539,8 +539,9 @@ out:
ssize_t f2fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
{
struct inode *inode = d_inode(dentry);
+ nid_t xnid = F2FS_I(inode)->i_xattr_nid;
struct f2fs_xattr_entry *entry;
- void *base_addr;
+ void *base_addr, *last_base_addr;
int error = 0;
size_t rest = buffer_size;
@@ -550,6 +551,8 @@ ssize_t f2fs_listxattr(struct dentry *de
if (error)
return error;
+ last_base_addr = (void *)base_addr + XATTR_SIZE(xnid, inode);
+
list_for_each_xattr(entry, base_addr) {
const struct xattr_handler *handler =
f2fs_xattr_handler(entry->e_name_index);
@@ -557,6 +560,15 @@ ssize_t f2fs_listxattr(struct dentry *de
size_t prefix_len;
size_t size;
+ if ((void *)(entry) + sizeof(__u32) > last_base_addr ||
+ (void *)XATTR_NEXT_ENTRY(entry) > last_base_addr) {
+ f2fs_err(F2FS_I_SB(inode), "inode (%lu) has corrupted xattr",
+ inode->i_ino);
+ set_sbi_flag(F2FS_I_SB(inode), SBI_NEED_FSCK);
+ error = -EFSCORRUPTED;
+ goto cleanup;
+ }
+
if (!handler || (handler->list && !handler->list(dentry)))
continue;
From: Sagi Grimberg <[email protected]>
[ Upstream commit 657f1975e9d9c880fa13030e88ba6cc84964f1db ]
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit 504db087aacc) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes: 0d0b660f214dc ("nvme: add ANA support")
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/multipath.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index aed6354cb2717..56caddeabb5e5 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -510,7 +510,7 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
if (!nr_nsids)
return 0;
- down_write(&ctrl->namespaces_rwsem);
+ down_read(&ctrl->namespaces_rwsem);
list_for_each_entry(ns, &ctrl->namespaces, list) {
unsigned nsid = le32_to_cpu(desc->nsids[n]);
@@ -521,7 +521,7 @@ static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
if (++n == nr_nsids)
break;
}
- up_write(&ctrl->namespaces_rwsem);
+ up_read(&ctrl->namespaces_rwsem);
return 0;
}
--
2.20.1
From: James Morse <[email protected]>
[ Upstream commit 05460849c3b51180d5ada3373d0449aea19075e4 ]
Cores affected by Neoverse-N1 #1542419 could execute a stale instruction
when a branch is updated to point to freshly generated instructions.
To workaround this issue we need user-space to issue unnecessary
icache maintenance that we can trap. Start by hiding CTR_EL0.DIC.
Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/arm64/silicon-errata.rst | 2 ++
arch/arm64/Kconfig | 16 +++++++++++++
arch/arm64/include/asm/cpucaps.h | 3 ++-
arch/arm64/kernel/cpu_errata.c | 32 +++++++++++++++++++++++++-
arch/arm64/kernel/traps.c | 3 +++
5 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 5a09661330fcc..59daa4c21816b 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -88,6 +88,8 @@ stable kernels.
+----------------+-----------------+-----------------+-----------------------------+
| ARM | Neoverse-N1 | #1349291 | N/A |
+----------------+-----------------+-----------------+-----------------------------+
+| ARM | Neoverse-N1 | #1542419 | ARM64_ERRATUM_1542419 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | MMU-500 | #841119,826419 | N/A |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6ccd2ed309631..a0bc9bbb92f34 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -559,6 +559,22 @@ config ARM64_ERRATUM_1463225
If unsure, say Y.
+config ARM64_ERRATUM_1542419
+ bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
+ default y
+ help
+ This option adds a workaround for ARM Neoverse-N1 erratum
+ 1542419.
+
+ Affected Neoverse-N1 cores could execute a stale instruction when
+ modified by another CPU. The workaround depends on a firmware
+ counterpart.
+
+ Workaround the issue by hiding the DIC feature from EL0. This
+ forces user-space to perform cache maintenance.
+
+ If unsure, say Y.
+
config CAVIUM_ERRATUM_22375
bool "Cavium erratum 22375, 24313"
default y
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index ac1dbca3d0cd3..1dc3c762fdcb9 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -54,7 +54,8 @@
#define ARM64_WORKAROUND_1463225 44
#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM 45
#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM 46
+#define ARM64_WORKAROUND_1542419 47
-#define ARM64_NCAPS 47
+#define ARM64_NCAPS 48
#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 96f576e9ea463..0b2830379fe03 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -88,13 +88,21 @@ has_mismatched_cache_type(const struct arm64_cpu_capabilities *entry,
}
static void
-cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *__unused)
+cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *cap)
{
u64 mask = arm64_ftr_reg_ctrel0.strict_mask;
+ bool enable_uct_trap = false;
/* Trap CTR_EL0 access on this CPU, only if it has a mismatch */
if ((read_cpuid_cachetype() & mask) !=
(arm64_ftr_reg_ctrel0.sys_val & mask))
+ enable_uct_trap = true;
+
+ /* ... or if the system is affected by an erratum */
+ if (cap->capability == ARM64_WORKAROUND_1542419)
+ enable_uct_trap = true;
+
+ if (enable_uct_trap)
sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0);
}
@@ -651,6 +659,18 @@ needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
return false;
}
+static bool __maybe_unused
+has_neoverse_n1_erratum_1542419(const struct arm64_cpu_capabilities *entry,
+ int scope)
+{
+ u32 midr = read_cpuid_id();
+ bool has_dic = read_cpuid_cachetype() & BIT(CTR_DIC_SHIFT);
+ const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1);
+
+ WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+ return is_midr_in_range(midr, &range) && has_dic;
+}
+
#ifdef CONFIG_HARDEN_EL2_VECTORS
static const struct midr_range arm64_harden_el2_vectors[] = {
@@ -927,6 +947,16 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM,
ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1542419
+ {
+ /* we depend on the firmware portion for correctness */
+ .desc = "ARM erratum 1542419 (kernel portion)",
+ .capability = ARM64_WORKAROUND_1542419,
+ .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+ .matches = has_neoverse_n1_erratum_1542419,
+ .cpu_enable = cpu_enable_trap_ctr_access,
+ },
#endif
{
}
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 34739e80211bc..465f0a0f8f0ab 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -470,6 +470,9 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
int rt = ESR_ELx_SYS64_ISS_RT(esr);
unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
+ if (cpus_have_const_cap(ARM64_WORKAROUND_1542419))
+ val &= ~BIT(CTR_DIC_SHIFT);
+
pt_regs_write_reg(regs, rt, val);
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
--
2.20.1
From: James Morse <[email protected]>
[ Upstream commit ee9d90be9ddace01b7fb126567e4b539fbe1f82f ]
Systems affected by Neoverse-N1 #1542419 support DIC so do not need to
perform icache maintenance once new instructions are cleaned to the PoU.
For the errata workaround, the kernel hides DIC from user-space, so that
the unnecessary cache maintenance can be trapped by firmware.
To reduce the number of traps, produce a fake IminLine value based on
PAGE_SIZE.
Signed-off-by: James Morse <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/cache.h | 3 ++-
arch/arm64/kernel/traps.c | 8 +++++++-
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
index 43da6dd295920..806e9dc2a852a 100644
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@@ -11,6 +11,7 @@
#define CTR_L1IP_MASK 3
#define CTR_DMINLINE_SHIFT 16
#define CTR_IMINLINE_SHIFT 0
+#define CTR_IMINLINE_MASK 0xf
#define CTR_ERG_SHIFT 20
#define CTR_CWG_SHIFT 24
#define CTR_CWG_MASK 15
@@ -18,7 +19,7 @@
#define CTR_DIC_SHIFT 29
#define CTR_CACHE_MINLINE_MASK \
- (0xf << CTR_DMINLINE_SHIFT | 0xf << CTR_IMINLINE_SHIFT)
+ (0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT)
#define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK)
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 465f0a0f8f0ab..4e3e9d9c81517 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -470,9 +470,15 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
int rt = ESR_ELx_SYS64_ISS_RT(esr);
unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
- if (cpus_have_const_cap(ARM64_WORKAROUND_1542419))
+ if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+ /* Hide DIC so that we can trap the unnecessary maintenance...*/
val &= ~BIT(CTR_DIC_SHIFT);
+ /* ... and fake IminLine to reduce the number of traps. */
+ val &= ~CTR_IMINLINE_MASK;
+ val |= (PAGE_SHIFT - 2) & CTR_IMINLINE_MASK;
+ }
+
pt_regs_write_reg(regs, rt, val);
arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
--
2.20.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 60969f02f07ae1445730c7b293c421d179da729c ]
There are a few items with wrong alignments. Solve them.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kconfig/qconf.cc | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 82773cc35d356..0f8c77f847114 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -627,7 +627,7 @@ void ConfigList::updateMenuList(ConfigItem *parent, struct menu* menu)
last = item;
continue;
}
- hide:
+hide:
if (item && item->menu == child) {
last = parent->firstChild();
if (last == item)
@@ -692,7 +692,7 @@ void ConfigList::updateMenuList(ConfigList *parent, struct menu* menu)
last = item;
continue;
}
- hide:
+hide:
if (item && item->menu == child) {
last = (ConfigItem*)parent->topLevelItem(0);
if (last == item)
@@ -1225,10 +1225,11 @@ QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos)
{
QMenu* popup = Parent::createStandardContextMenu(pos);
QAction* action = new QAction("Show Debug Info", popup);
- action->setCheckable(true);
- connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
- connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
- action->setChecked(showDebug());
+
+ action->setCheckable(true);
+ connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
+ connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
+ action->setChecked(showDebug());
popup->addSeparator();
popup->addAction(action);
return popup;
--
2.20.1
From: Vasily Averin <[email protected]>
[ Upstream commit 89163f93c6f969da5811af5377cc10173583123b ]
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Waiman Long <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
ipc/util.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ipc/util.c b/ipc/util.c
index d126d156efc64..594871610d454 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -764,13 +764,13 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
total++;
}
+ *new_pos = pos + 1;
if (total >= ids->in_use)
return NULL;
for (; pos < ipc_mni; pos++) {
ipc = idr_find(&ids->ipcs_idr, pos);
if (ipc != NULL) {
- *new_pos = pos + 1;
rcu_read_lock();
ipc_lock_object(ipc);
return ipc;
--
2.20.1
From: Evan Green <[email protected]>
[ Upstream commit c52abf563049e787c1341cdf15c7dbe1bfbc951b ]
If the backing device for a loop device is itself a block device,
then mirror the "write zeroes" capabilities of the underlying
block device into the loop device. Copy this capability into both
max_write_zeroes_sectors and max_discard_sectors of the loop device.
The reason for this is that REQ_OP_DISCARD on a loop device translates
into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
presents a consistent interface for loop devices (that discarded data
is zeroed), regardless of the backing device type of the loop device.
There should be no behavior change for loop devices backed by regular
files.
This change fixes blktest block/003, and removes an extraneous
error print in block/013 when testing on a loop device backed
by a block device that does not support discard.
Signed-off-by: Evan Green <[email protected]>
Reviewed-by: Gwendal Grignou <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
[used updated version of Evan's comment in loop_config_discard()]
[moved backingq to local scope, removed redundant braces]
Signed-off-by: Andrzej Pietrasiewicz <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/loop.c | 42 +++++++++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 11 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ef6e251857c8c..57ed6b70d2950 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -427,11 +427,12 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
* information.
*/
struct file *file = lo->lo_backing_file;
+ struct request_queue *q = lo->lo_queue;
int ret;
mode |= FALLOC_FL_KEEP_SIZE;
- if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
+ if (!blk_queue_discard(q)) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -863,28 +864,47 @@ static void loop_config_discard(struct loop_device *lo)
struct inode *inode = file->f_mapping->host;
struct request_queue *q = lo->lo_queue;
+ /*
+ * If the backing device is a block device, mirror its zeroing
+ * capability. Set the discard sectors to the block device's zeroing
+ * capabilities because loop discards result in blkdev_issue_zeroout(),
+ * not blkdev_issue_discard(). This maintains consistent behavior with
+ * file-backed loop devices: discarded regions read back as zero.
+ */
+ if (S_ISBLK(inode->i_mode) && !lo->lo_encrypt_key_size) {
+ struct request_queue *backingq;
+
+ backingq = bdev_get_queue(inode->i_bdev);
+ blk_queue_max_discard_sectors(q,
+ backingq->limits.max_write_zeroes_sectors);
+
+ blk_queue_max_write_zeroes_sectors(q,
+ backingq->limits.max_write_zeroes_sectors);
+
/*
* We use punch hole to reclaim the free space used by the
* image a.k.a. discard. However we do not support discard if
* encryption is enabled, because it may give an attacker
* useful information.
*/
- if ((!file->f_op->fallocate) ||
- lo->lo_encrypt_key_size) {
+ } else if (!file->f_op->fallocate || lo->lo_encrypt_key_size) {
q->limits.discard_granularity = 0;
q->limits.discard_alignment = 0;
blk_queue_max_discard_sectors(q, 0);
blk_queue_max_write_zeroes_sectors(q, 0);
- blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
- return;
- }
- q->limits.discard_granularity = inode->i_sb->s_blocksize;
- q->limits.discard_alignment = 0;
+ } else {
+ q->limits.discard_granularity = inode->i_sb->s_blocksize;
+ q->limits.discard_alignment = 0;
- blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
- blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
- blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+ blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
+ blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
+ }
+
+ if (q->limits.max_write_zeroes_sectors)
+ blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+ else
+ blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
}
static void loop_unprepare_queue(struct loop_device *lo)
--
2.20.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ]
This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/time.c | 44 +++++++++++---------------------------
1 file changed, 13 insertions(+), 31 deletions(-)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 11301a1187f33..0e0a2227af7d7 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -522,35 +522,6 @@ static inline void clear_irq_work_pending(void)
"i" (offsetof(struct paca_struct, irq_work_pending)));
}
-void arch_irq_work_raise(void)
-{
- preempt_disable();
- set_irq_work_pending_flag();
- /*
- * Non-nmi code running with interrupts disabled will replay
- * irq_happened before it re-enables interrupts, so setthe
- * decrementer there instead of causing a hardware exception
- * which would immediately hit the masked interrupt handler
- * and have the net effect of setting the decrementer in
- * irq_happened.
- *
- * NMI interrupts can not check this when they return, so the
- * decrementer hardware exception is raised, which will fire
- * when interrupts are next enabled.
- *
- * BookE does not support this yet, it must audit all NMI
- * interrupt handlers to ensure they call nmi_enter() so this
- * check would be correct.
- */
- if (IS_ENABLED(CONFIG_BOOKE) || !irqs_disabled() || in_nmi()) {
- set_dec(1);
- } else {
- hard_irq_disable();
- local_paca->irq_happened |= PACA_IRQ_DEC;
- }
- preempt_enable();
-}
-
#else /* 32-bit */
DEFINE_PER_CPU(u8, irq_work_pending);
@@ -559,16 +530,27 @@ DEFINE_PER_CPU(u8, irq_work_pending);
#define test_irq_work_pending() __this_cpu_read(irq_work_pending)
#define clear_irq_work_pending() __this_cpu_write(irq_work_pending, 0)
+#endif /* 32 vs 64 bit */
+
void arch_irq_work_raise(void)
{
+ /*
+ * 64-bit code that uses irq soft-mask can just cause an immediate
+ * interrupt here that gets soft masked, if this is called under
+ * local_irq_disable(). It might be possible to prevent that happening
+ * by noticing interrupts are disabled and setting decrementer pending
+ * to be replayed when irqs are enabled. The problem there is that
+ * tracing can call irq_work_raise, including in code that does low
+ * level manipulations of irq soft-mask state (e.g., trace_hardirqs_on)
+ * which could get tangled up if we're messing with the same state
+ * here.
+ */
preempt_disable();
set_irq_work_pending_flag();
set_dec(1);
preempt_enable();
}
-#endif /* 32 vs 64 bit */
-
#else /* CONFIG_IRQ_WORK */
#define test_irq_work_pending() 0
--
2.20.1
From: František Kučera <[email protected]>
[ Upstream commit 73d8c94084341e2895169a0462dbc18167f01683 ]
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
Signed-off-by: František Kučera <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index d187aa6d50db0..dcaf9eed9a415 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
}
},
+{
+ /*
+ * Pioneer DJ DJM-250MK2
+ * PCM is 8 channels out @ 48 fixed (endpoints 0x01).
+ * The output from computer to the mixer is usable.
+ *
+ * The input (phono or line to computer) is not working.
+ * It should be at endpoint 0x82 and probably also 8 channels,
+ * but it seems that it works only with Pioneer proprietary software.
+ * Even on officially supported OS, the Audacity was unable to record
+ * and Mixxx to recognize the control vinyls.
+ */
+ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 8, // outputs
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 }
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
#undef USB_DEVICE_VENDOR_SPEC
--
2.20.1
From: Ganesh Goudar <[email protected]>
[ Upstream commit a95a0a1654f16366360399574e10efd87e867b39 ]
MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.
This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.
Without this fix below kernel crash is seen on injecting
SLB multihit:
BUG: Unable to handle kernel data access on read at 0xc00000027b205950
Faulting instruction address: 0xc00000000003b7e0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E)
CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1
NIP: c00000000003b7e0 LR: c0000000000f2218 CTR: 0000000000000000
REGS: c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh)
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28002428 XER: 20040000
CFAR: c0000000000f2214 DAR: c00000027b205950 DSISR: 40000000 IRQMASK: 0
GPR00: c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70
GPR04: 0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000
GPR08: 0000000000000000 0000000300000003 c000000001035950 0000000003000048
GPR12: 000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000
GPR16: 0000000000000540 c008000001110000 c008000001110540 0000000000000000
GPR20: c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300
GPR24: c000000001442330 c00800000800000d c008000008000000 4009287a77000510
GPR28: 0000000000000000 0000000000000002 c000000001033d30 0000000000000001
NIP [c00000000003b7e0] save_mce_event+0x30/0x240
LR [c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0
Call Trace:
Instruction dump:
3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf
3fc2ffaf e98d0030 394a1150 3bdef530 <7d6a62aa> 1d2b0048 2f8b0063 380b0001
---[ end trace 46fd63f36bbdd940 ]---
Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Reviewed-by: Mahesh Salgaonkar <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Ganesh Goudar <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/ras.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 3acdcc3bb908c..753adeb624f23 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -683,6 +683,17 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
#endif
out:
+ /*
+ * Enable translation as we will be accessing per-cpu variables
+ * in save_mce_event() which may fall outside RMO region, also
+ * leave it enabled because subsequently we will be queuing work
+ * to workqueues where again per-cpu variables accessed, besides
+ * fwnmi_release_errinfo() crashes when called in realmode on
+ * pseries.
+ * Note: All the realmode handling like flushing SLB entries for
+ * SLB multihit is done by now.
+ */
+ mtmsr(mfmsr() | MSR_IR | MSR_DR);
save_mce_event(regs, disposition == RTAS_DISP_FULLY_RECOVERED,
&mce_err, regs->nip, eaddr, paddr);
--
2.20.1
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit cdcda0d1f8f4ab84efe7cd9921c98364398aefd7 ]
The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/direct.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 867fd72cb2605..0a093a675b632 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -45,7 +45,8 @@ static inline dma_addr_t phys_to_dma_direct(struct device *dev,
u64 dma_direct_get_required_mask(struct device *dev)
{
- u64 max_dma = phys_to_dma_direct(dev, (max_pfn - 1) << PAGE_SHIFT);
+ phys_addr_t phys = (phys_addr_t)(max_pfn - 1) << PAGE_SHIFT;
+ u64 max_dma = phys_to_dma_direct(dev, phys);
return (1ULL << (fls64(max_dma) - 1)) * 2 - 1;
}
--
2.20.1
From: Isabel Zhang <[email protected]>
[ Upstream commit 346d8a0a3c91888a412c2735d69daa09c00f0203 ]
[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.
[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.
Signed-off-by: Isabel Zhang <[email protected]>
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 4704aac336c29..89bd0ba3db1df 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -283,6 +283,8 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,
int i = 0;
bool ret = false;
+ stream->adjust = *adjust;
+
for (i = 0; i < MAX_PIPES; i++) {
struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i];
--
2.20.1
From: Yongqiang Sun <[email protected]>
[ Upstream commit 9941b8129030c9202aaf39114477a0e58c0d6ffc ]
[Why]
In some scenario like 1366x768 VSR enabled connected with a 4K monitor
and playing 4K video in clone mode, underflow will be observed due to
decrease dppclk when previouse surface scan isn't finished
[How]
In this use case, surface flip is switching between 4K and 1366x768,
1366x768 needs smaller dppclk, and when decrease the clk and previous
surface scan is for 4K and scan isn't done, underflow will happen. Not
doing optimize bandwidth in case of flip pending.
Signed-off-by: Yongqiang Sun <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 71c574d1e8be2..2028dc017f7a0 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1182,6 +1182,26 @@ bool dc_commit_state(struct dc *dc, struct dc_state *context)
return (result == DC_OK);
}
+static bool is_flip_pending_in_pipes(struct dc *dc, struct dc_state *context)
+{
+ int i;
+ struct pipe_ctx *pipe;
+
+ for (i = 0; i < MAX_PIPES; i++) {
+ pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (!pipe->plane_state)
+ continue;
+
+ /* Must set to false to start with, due to OR in update function */
+ pipe->plane_state->status.is_flip_pending = false;
+ dc->hwss.update_pending_status(pipe);
+ if (pipe->plane_state->status.is_flip_pending)
+ return true;
+ }
+ return false;
+}
+
bool dc_post_update_surfaces_to_stream(struct dc *dc)
{
int i;
@@ -1192,6 +1212,9 @@ bool dc_post_update_surfaces_to_stream(struct dc *dc)
post_surface_trace(dc);
+ if (is_flip_pending_in_pipes(dc, context))
+ return true;
+
for (i = 0; i < dc->res_pool->pipe_count; i++)
if (context->res_ctx.pipe_ctx[i].stream == NULL ||
context->res_ctx.pipe_ctx[i].plane_state == NULL) {
--
2.20.1
From: Mika Westerberg <[email protected]>
[ Upstream commit 4827d63891b6a839dac49c6ab62e61c4b011c4f2 ]
Add pcie_wait_for_link_delay(). Similar to pcie_wait_for_link() but allows
passing custom activation delay in milliseconds.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 981ae16f935bc..94d6e120b4734 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4605,14 +4605,17 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
}
+
/**
- * pcie_wait_for_link - Wait until link is active or inactive
+ * pcie_wait_for_link_delay - Wait until link is active or inactive
* @pdev: Bridge device
* @active: waiting for active or inactive?
+ * @delay: Delay to wait after link has become active (in ms)
*
* Use this to wait till link becomes active or inactive.
*/
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
+ int delay)
{
int timeout = 1000;
bool ret;
@@ -4649,13 +4652,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
timeout -= 10;
}
if (active && ret)
- msleep(100);
+ msleep(delay);
else if (ret != active)
pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
active ? "set" : "cleared");
return ret == active;
}
+/**
+ * pcie_wait_for_link - Wait until link is active or inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+ return pcie_wait_for_link_delay(pdev, active, 100);
+}
+
void pci_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
--
2.20.1
From: Eric Biggers <[email protected]>
[ Upstream commit 6d573a07528308eb77ec072c010819c359bebf6e ]
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: NeilBrown <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kmod/kmod.sh | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh
index 8b944cf042f6c..315a43111e046 100755
--- a/tools/testing/selftests/kmod/kmod.sh
+++ b/tools/testing/selftests/kmod/kmod.sh
@@ -505,18 +505,23 @@ function test_num()
fi
}
-function get_test_count()
+function get_test_data()
{
test_num $1
- TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ local field_num=$(echo $1 | sed 's/^0*//')
+ echo $ALL_TESTS | awk '{print $'$field_num'}'
+}
+
+function get_test_count()
+{
+ TEST_DATA=$(get_test_data $1)
LAST_TWO=${TEST_DATA#*:*}
echo ${LAST_TWO%:*}
}
function get_test_enabled()
{
- test_num $1
- TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ TEST_DATA=$(get_test_data $1)
echo ${TEST_DATA#*:*:}
}
--
2.20.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit eb002726fac7cefb98ff39ddb89e150a1c24fe85 ]
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias]
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-hub.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index af92b2576fe91..712cd44f05ace 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1322,7 +1322,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_set_link_state(xhci, ports[wIndex], link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
- msleep(20); /* wait device to enter */
+ if (link_state == USB_SS_PORT_LS_U3) {
+ int retries = 16;
+
+ while (retries--) {
+ usleep_range(4000, 8000);
+ temp = readl(ports[wIndex]->addr);
+ if ((temp & PORT_PLS_MASK) == XDEV_U3)
+ break;
+ }
+ }
spin_lock_irqsave(&xhci->lock, flags);
temp = readl(ports[wIndex]->addr);
--
2.20.1
From: Mika Westerberg <[email protected]>
[ Upstream commit 87d0f2a5536fdf5053a6d341880f96135549a644 ]
This addresses deadlocks in these common cases in hierarchies containing
two switches:
- All involved ports are runtime suspended and they are unplugged. This
can happen easily if the drivers involved automatically enable runtime
PM (xHCI for example does that).
- System is suspended (e.g., closing the lid on a laptop) with a dock +
something else connected, and the dock is unplugged while suspended.
These cases lead to the following deadlock:
INFO: task irq/126-pciehp:198 blocked for more than 120 seconds.
irq/126-pciehp D 0 198 2 0x80000000
Call Trace:
schedule+0x2c/0x80
schedule_timeout+0x246/0x350
wait_for_completion+0xb7/0x140
kthread_stop+0x49/0x110
free_irq+0x32/0x70
pcie_shutdown_notification+0x2f/0x50
pciehp_remove+0x27/0x50
pcie_port_remove_service+0x36/0x50
device_release_driver+0x12/0x20
bus_remove_device+0xec/0x160
device_del+0x13b/0x350
device_unregister+0x1a/0x60
remove_iter+0x1e/0x30
device_for_each_child+0x56/0x90
pcie_port_device_remove+0x22/0x40
pcie_portdrv_remove+0x20/0x60
pci_device_remove+0x3e/0xc0
device_release_driver_internal+0x18c/0x250
device_release_driver+0x12/0x20
pci_stop_bus_device+0x6f/0x90
pci_stop_bus_device+0x31/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pciehp_unconfigure_device+0x88/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
irq/190-pciehp D 0 2288 2 0x80000000
Call Trace:
__schedule+0x2a2/0x880
schedule+0x2c/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2c/0x30
pci_lock_rescan_remove+0x15/0x20
pciehp_unconfigure_device+0x4d/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active(). Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.
Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.
[bhelgaas: add common scenarios to commit log]
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/pciehp.h | 6 ++--
drivers/pci/hotplug/pciehp_core.c | 11 ++++--
drivers/pci/hotplug/pciehp_ctrl.c | 4 +--
drivers/pci/hotplug/pciehp_hpc.c | 59 +++++++++++++++++++++++++------
4 files changed, 61 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 882ce82c46990..aa61d4c219d7b 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -174,10 +174,10 @@ void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn);
void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
int pciehp_query_power_fault(struct controller *ctrl);
-bool pciehp_card_present(struct controller *ctrl);
-bool pciehp_card_present_or_link_active(struct controller *ctrl);
+int pciehp_card_present(struct controller *ctrl);
+int pciehp_card_present_or_link_active(struct controller *ctrl);
int pciehp_check_link_status(struct controller *ctrl);
-bool pciehp_check_link_active(struct controller *ctrl);
+int pciehp_check_link_active(struct controller *ctrl);
void pciehp_release_ctrl(struct controller *ctrl);
int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 56daad828c9e0..312cc45c44c78 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -139,10 +139,15 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct controller *ctrl = to_ctrl(hotplug_slot);
struct pci_dev *pdev = ctrl->pcie->port;
+ int ret;
pci_config_pm_runtime_get(pdev);
- *value = pciehp_card_present_or_link_active(ctrl);
+ ret = pciehp_card_present_or_link_active(ctrl);
pci_config_pm_runtime_put(pdev);
+ if (ret < 0)
+ return ret;
+
+ *value = ret;
return 0;
}
@@ -158,13 +163,13 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
*/
static void pciehp_check_presence(struct controller *ctrl)
{
- bool occupied;
+ int occupied;
down_read(&ctrl->reset_lock);
mutex_lock(&ctrl->state_lock);
occupied = pciehp_card_present_or_link_active(ctrl);
- if ((occupied && (ctrl->state == OFF_STATE ||
+ if ((occupied > 0 && (ctrl->state == OFF_STATE ||
ctrl->state == BLINKINGON_STATE)) ||
(!occupied && (ctrl->state == ON_STATE ||
ctrl->state == BLINKINGOFF_STATE)))
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index dd8e4a5fb2826..6503d15effbbd 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -226,7 +226,7 @@ void pciehp_handle_disable_request(struct controller *ctrl)
void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
{
- bool present, link_active;
+ int present, link_active;
/*
* If the slot is on and presence or link has changed, turn it off.
@@ -257,7 +257,7 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
mutex_lock(&ctrl->state_lock);
present = pciehp_card_present(ctrl);
link_active = pciehp_check_link_active(ctrl);
- if (!present && !link_active) {
+ if (present <= 0 && link_active <= 0) {
mutex_unlock(&ctrl->state_lock);
return;
}
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index d74a71712cde4..356786a3b7f4b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -201,17 +201,29 @@ static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask)
pcie_do_write_cmd(ctrl, cmd, mask, false);
}
-bool pciehp_check_link_active(struct controller *ctrl)
+/**
+ * pciehp_check_link_active() - Is the link active
+ * @ctrl: PCIe hotplug controller
+ *
+ * Check whether the downstream link is currently active. Note it is
+ * possible that the card is removed immediately after this so the
+ * caller may need to take it into account.
+ *
+ * If the hotplug controller itself is not available anymore returns
+ * %-ENODEV.
+ */
+int pciehp_check_link_active(struct controller *ctrl)
{
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 lnk_status;
- bool ret;
+ int ret;
- pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
- ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+ ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+ return -ENODEV;
- if (ret)
- ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
+ ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+ ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
return ret;
}
@@ -373,13 +385,29 @@ void pciehp_get_latch_status(struct controller *ctrl, u8 *status)
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
}
-bool pciehp_card_present(struct controller *ctrl)
+/**
+ * pciehp_card_present() - Is the card present
+ * @ctrl: PCIe hotplug controller
+ *
+ * Function checks whether the card is currently present in the slot and
+ * in that case returns true. Note it is possible that the card is
+ * removed immediately after the check so the caller may need to take
+ * this into account.
+ *
+ * It the hotplug controller itself is not available anymore returns
+ * %-ENODEV.
+ */
+int pciehp_card_present(struct controller *ctrl)
{
struct pci_dev *pdev = ctrl_dev(ctrl);
u16 slot_status;
+ int ret;
- pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
- return slot_status & PCI_EXP_SLTSTA_PDS;
+ ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+ return -ENODEV;
+
+ return !!(slot_status & PCI_EXP_SLTSTA_PDS);
}
/**
@@ -390,10 +418,19 @@ bool pciehp_card_present(struct controller *ctrl)
* Presence Detect State bit, this helper also returns true if the Link Active
* bit is set. This is a concession to broken hotplug ports which hardwire
* Presence Detect State to zero, such as Wilocity's [1ae9:0200].
+ *
+ * Returns: %1 if the slot is occupied and %0 if it is not. If the hotplug
+ * port is not present anymore returns %-ENODEV.
*/
-bool pciehp_card_present_or_link_active(struct controller *ctrl)
+int pciehp_card_present_or_link_active(struct controller *ctrl)
{
- return pciehp_card_present(ctrl) || pciehp_check_link_active(ctrl);
+ int ret;
+
+ ret = pciehp_card_present(ctrl);
+ if (ret)
+ return ret;
+
+ return pciehp_check_link_active(ctrl);
}
int pciehp_query_power_fault(struct controller *ctrl)
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 06bd48b6cd97ef3889b68c8e09014d81dbc463f1 ]
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: H. Peter Anvin (Intel) <[email protected]>
Reviewed-by: Jason A. Donenfeld <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/raid6/test/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index 3ab8720aa2f84..b9e6c3648be1a 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -35,13 +35,13 @@ endif
ifeq ($(IS_X86),yes)
OBJS += mmx.o sse1.o sse2.o avx2.o recov_ssse3.o recov_avx2.o avx512.o recov_avx512.o
CFLAGS += $(shell echo "pshufb %xmm0, %xmm0" | \
- gcc -c -x assembler - >&/dev/null && \
+ gcc -c -x assembler - >/dev/null 2>&1 && \
rm ./-.o && echo -DCONFIG_AS_SSSE3=1)
CFLAGS += $(shell echo "vpbroadcastb %xmm0, %ymm1" | \
- gcc -c -x assembler - >&/dev/null && \
+ gcc -c -x assembler - >/dev/null 2>&1 && \
rm ./-.o && echo -DCONFIG_AS_AVX2=1)
CFLAGS += $(shell echo "vpmovm2b %k1, %zmm5" | \
- gcc -c -x assembler - >&/dev/null && \
+ gcc -c -x assembler - >/dev/null 2>&1 && \
rm ./-.o && echo -DCONFIG_AS_AVX512=1)
else ifeq ($(HAS_NEON),yes)
OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
--
2.20.1
From: Steven Rostedt (VMware) <[email protected]>
[ Upstream commit b43e78f65b1d35fd3e13c7b23f9b64ea83c9ad3a ]
As the ftrace selftests can run for a long period of time, disable the
timeout that the general selftests have. If a selftest hangs, then it
probably means the machine will hang too.
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: Miroslav Benes <[email protected]>
Tested-by: Miroslav Benes <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/ftrace/settings | 1 +
1 file changed, 1 insertion(+)
create mode 100644 tools/testing/selftests/ftrace/settings
diff --git a/tools/testing/selftests/ftrace/settings b/tools/testing/selftests/ftrace/settings
new file mode 100644
index 0000000000000..e7b9417537fbc
--- /dev/null
+++ b/tools/testing/selftests/ftrace/settings
@@ -0,0 +1 @@
+timeout=0
--
2.20.1
From: Kevin Barnett <[email protected]>
[ Upstream commit 0530736e40a0695b1ee2762e2684d00549699da4 ]
Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhilda
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Signed-off-by: Kevin Barnett <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/smartpqi/smartpqi.h | 9 +-
drivers/scsi/smartpqi/smartpqi_init.c | 126 ++++++++++++++++++++++----
2 files changed, 115 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 79d2af36f6552..2aa81b22f2695 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -1130,8 +1130,9 @@ struct pqi_ctrl_info {
struct mutex ofa_mutex; /* serialize ofa */
bool controller_online;
bool block_requests;
- bool in_shutdown;
+ bool block_device_reset;
bool in_ofa;
+ bool in_shutdown;
u8 inbound_spanning_supported : 1;
u8 outbound_spanning_supported : 1;
u8 pqi_mode_enabled : 1;
@@ -1173,6 +1174,7 @@ struct pqi_ctrl_info {
struct pqi_ofa_memory *pqi_ofa_mem_virt_addr;
dma_addr_t pqi_ofa_mem_dma_handle;
void **pqi_ofa_chunk_virt_addr;
+ atomic_t sync_cmds_outstanding;
};
enum pqi_ctrl_mode {
@@ -1423,6 +1425,11 @@ static inline bool pqi_ctrl_blocked(struct pqi_ctrl_info *ctrl_info)
return ctrl_info->block_requests;
}
+static inline bool pqi_device_reset_blocked(struct pqi_ctrl_info *ctrl_info)
+{
+ return ctrl_info->block_device_reset;
+}
+
void pqi_sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
struct sas_rphy *rphy);
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index ea5409bebf578..793793343950e 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -249,6 +249,11 @@ static inline void pqi_ctrl_unblock_requests(struct pqi_ctrl_info *ctrl_info)
scsi_unblock_requests(ctrl_info->scsi_host);
}
+static inline void pqi_ctrl_block_device_reset(struct pqi_ctrl_info *ctrl_info)
+{
+ ctrl_info->block_device_reset = true;
+}
+
static unsigned long pqi_wait_if_ctrl_blocked(struct pqi_ctrl_info *ctrl_info,
unsigned long timeout_msecs)
{
@@ -331,6 +336,16 @@ static inline bool pqi_device_in_remove(struct pqi_ctrl_info *ctrl_info,
return device->in_remove && !ctrl_info->in_shutdown;
}
+static inline void pqi_ctrl_shutdown_start(struct pqi_ctrl_info *ctrl_info)
+{
+ ctrl_info->in_shutdown = true;
+}
+
+static inline bool pqi_ctrl_in_shutdown(struct pqi_ctrl_info *ctrl_info)
+{
+ return ctrl_info->in_shutdown;
+}
+
static inline void pqi_schedule_rescan_worker_with_delay(
struct pqi_ctrl_info *ctrl_info, unsigned long delay)
{
@@ -360,6 +375,11 @@ static inline void pqi_cancel_rescan_worker(struct pqi_ctrl_info *ctrl_info)
cancel_delayed_work_sync(&ctrl_info->rescan_work);
}
+static inline void pqi_cancel_event_worker(struct pqi_ctrl_info *ctrl_info)
+{
+ cancel_work_sync(&ctrl_info->event_work);
+}
+
static inline u32 pqi_read_heartbeat_counter(struct pqi_ctrl_info *ctrl_info)
{
if (!ctrl_info->heartbeat_counter)
@@ -4122,6 +4142,8 @@ static int pqi_submit_raid_request_synchronous(struct pqi_ctrl_info *ctrl_info,
goto out;
}
+ atomic_inc(&ctrl_info->sync_cmds_outstanding);
+
io_request = pqi_alloc_io_request(ctrl_info);
put_unaligned_le16(io_request->index,
@@ -4168,6 +4190,7 @@ static int pqi_submit_raid_request_synchronous(struct pqi_ctrl_info *ctrl_info,
pqi_free_io_request(io_request);
+ atomic_dec(&ctrl_info->sync_cmds_outstanding);
out:
up(&ctrl_info->sync_request_sem);
@@ -5402,7 +5425,7 @@ static int pqi_scsi_queue_command(struct Scsi_Host *shost,
pqi_ctrl_busy(ctrl_info);
if (pqi_ctrl_blocked(ctrl_info) || pqi_device_in_reset(device) ||
- pqi_ctrl_in_ofa(ctrl_info)) {
+ pqi_ctrl_in_ofa(ctrl_info) || pqi_ctrl_in_shutdown(ctrl_info)) {
rc = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
@@ -5650,6 +5673,18 @@ static int pqi_ctrl_wait_for_pending_io(struct pqi_ctrl_info *ctrl_info,
return 0;
}
+static int pqi_ctrl_wait_for_pending_sync_cmds(struct pqi_ctrl_info *ctrl_info)
+{
+ while (atomic_read(&ctrl_info->sync_cmds_outstanding)) {
+ pqi_check_ctrl_health(ctrl_info);
+ if (pqi_ctrl_offline(ctrl_info))
+ return -ENXIO;
+ usleep_range(1000, 2000);
+ }
+
+ return 0;
+}
+
static void pqi_lun_reset_complete(struct pqi_io_request *io_request,
void *context)
{
@@ -5787,17 +5822,17 @@ static int pqi_eh_device_reset_handler(struct scsi_cmnd *scmd)
shost->host_no, device->bus, device->target, device->lun);
pqi_check_ctrl_health(ctrl_info);
- if (pqi_ctrl_offline(ctrl_info)) {
- dev_err(&ctrl_info->pci_dev->dev,
- "controller %u offlined - cannot send device reset\n",
- ctrl_info->ctrl_id);
+ if (pqi_ctrl_offline(ctrl_info) ||
+ pqi_device_reset_blocked(ctrl_info)) {
rc = FAILED;
goto out;
}
pqi_wait_until_ofa_finished(ctrl_info);
+ atomic_inc(&ctrl_info->sync_cmds_outstanding);
rc = pqi_device_reset(ctrl_info, device);
+ atomic_dec(&ctrl_info->sync_cmds_outstanding);
out:
dev_err(&ctrl_info->pci_dev->dev,
@@ -6119,7 +6154,8 @@ static int pqi_ioctl(struct scsi_device *sdev, unsigned int cmd,
ctrl_info = shost_to_hba(sdev->host);
- if (pqi_ctrl_in_ofa(ctrl_info))
+ if (pqi_ctrl_in_ofa(ctrl_info) ||
+ pqi_ctrl_in_shutdown(ctrl_info))
return -EBUSY;
switch (cmd) {
@@ -7074,13 +7110,20 @@ static int pqi_force_sis_mode(struct pqi_ctrl_info *ctrl_info)
return pqi_revert_to_sis_mode(ctrl_info);
}
+#define PQI_POST_RESET_DELAY_B4_MSGU_READY 5000
+
static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
{
int rc;
- rc = pqi_force_sis_mode(ctrl_info);
- if (rc)
- return rc;
+ if (reset_devices) {
+ sis_soft_reset(ctrl_info);
+ msleep(PQI_POST_RESET_DELAY_B4_MSGU_READY);
+ } else {
+ rc = pqi_force_sis_mode(ctrl_info);
+ if (rc)
+ return rc;
+ }
/*
* Wait until the controller is ready to start accepting SIS
@@ -7514,6 +7557,7 @@ static struct pqi_ctrl_info *pqi_alloc_ctrl_info(int numa_node)
INIT_WORK(&ctrl_info->event_work, pqi_event_worker);
atomic_set(&ctrl_info->num_interrupts, 0);
+ atomic_set(&ctrl_info->sync_cmds_outstanding, 0);
INIT_DELAYED_WORK(&ctrl_info->rescan_work, pqi_rescan_worker);
INIT_DELAYED_WORK(&ctrl_info->update_time_work, pqi_update_time_worker);
@@ -7787,8 +7831,6 @@ static int pqi_ofa_host_memory_update(struct pqi_ctrl_info *ctrl_info)
0, NULL, NO_TIMEOUT);
}
-#define PQI_POST_RESET_DELAY_B4_MSGU_READY 5000
-
static int pqi_ofa_ctrl_restart(struct pqi_ctrl_info *ctrl_info)
{
msleep(PQI_POST_RESET_DELAY_B4_MSGU_READY);
@@ -7956,28 +7998,74 @@ static void pqi_pci_remove(struct pci_dev *pci_dev)
pqi_remove_ctrl(ctrl_info);
}
+static void pqi_crash_if_pending_command(struct pqi_ctrl_info *ctrl_info)
+{
+ unsigned int i;
+ struct pqi_io_request *io_request;
+ struct scsi_cmnd *scmd;
+
+ for (i = 0; i < ctrl_info->max_io_slots; i++) {
+ io_request = &ctrl_info->io_request_pool[i];
+ if (atomic_read(&io_request->refcount) == 0)
+ continue;
+ scmd = io_request->scmd;
+ WARN_ON(scmd != NULL); /* IO command from SML */
+ WARN_ON(scmd == NULL); /* Non-IO cmd or driver initiated*/
+ }
+}
+
static void pqi_shutdown(struct pci_dev *pci_dev)
{
int rc;
struct pqi_ctrl_info *ctrl_info;
ctrl_info = pci_get_drvdata(pci_dev);
- if (!ctrl_info)
- goto error;
+ if (!ctrl_info) {
+ dev_err(&pci_dev->dev,
+ "cache could not be flushed\n");
+ return;
+ }
+
+ pqi_disable_events(ctrl_info);
+ pqi_wait_until_ofa_finished(ctrl_info);
+ pqi_cancel_update_time_worker(ctrl_info);
+ pqi_cancel_rescan_worker(ctrl_info);
+ pqi_cancel_event_worker(ctrl_info);
+
+ pqi_ctrl_shutdown_start(ctrl_info);
+ pqi_ctrl_wait_until_quiesced(ctrl_info);
+
+ rc = pqi_ctrl_wait_for_pending_io(ctrl_info, NO_TIMEOUT);
+ if (rc) {
+ dev_err(&pci_dev->dev,
+ "wait for pending I/O failed\n");
+ return;
+ }
+
+ pqi_ctrl_block_device_reset(ctrl_info);
+ pqi_wait_until_lun_reset_finished(ctrl_info);
/*
* Write all data in the controller's battery-backed cache to
* storage.
*/
rc = pqi_flush_cache(ctrl_info, SHUTDOWN);
- pqi_free_interrupts(ctrl_info);
- pqi_reset(ctrl_info);
- if (rc == 0)
+ if (rc)
+ dev_err(&pci_dev->dev,
+ "unable to flush controller cache\n");
+
+ pqi_ctrl_block_requests(ctrl_info);
+
+ rc = pqi_ctrl_wait_for_pending_sync_cmds(ctrl_info);
+ if (rc) {
+ dev_err(&pci_dev->dev,
+ "wait for pending sync cmds failed\n");
return;
+ }
+
+ pqi_crash_if_pending_command(ctrl_info);
+ pqi_reset(ctrl_info);
-error:
- dev_warn(&pci_dev->dev,
- "unable to flush controller cache\n");
}
static void pqi_process_lockup_action_param(void)
--
2.20.1
From: Vasily Averin <[email protected]>
[ Upstream commit f4d74ef6220c1eda0875da30457bef5c7111ab06 ]
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Peter Oberparleiter <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Waiman Long <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/gcov/fs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/gcov/fs.c b/kernel/gcov/fs.c
index e5eb5ea7ea598..cc4ee482d3fba 100644
--- a/kernel/gcov/fs.c
+++ b/kernel/gcov/fs.c
@@ -108,9 +108,9 @@ static void *gcov_seq_next(struct seq_file *seq, void *data, loff_t *pos)
{
struct gcov_iterator *iter = data;
+ (*pos)++;
if (gcov_iter_next(iter))
return NULL;
- (*pos)++;
return iter;
}
--
2.20.1
From: Nicholas Kazlauskas <[email protected]>
[ Upstream commit 3bae20137cae6c03f58f96c0bc9f3d46f0bc17d4 ]
[Why]
If a plane isn't being actively enabled or disabled then DC won't
always recalculate scaling rects and ratios for the primary plane.
This results in only a partial or corrupted rect being displayed on
the screen instead of scaling to fit the screen.
[How]
Add back the logic to recalculate the scaling rects into
dc_commit_updates_for_stream since this is the expected place to
do it in DC.
This was previously removed a few years ago to fix an underscan issue
but underscan is still functional now with this change - and it should
be, since this is only updating to the latest plane state getting passed
in.
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 89bd0ba3db1df..71c574d1e8be2 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2154,7 +2154,7 @@ void dc_commit_updates_for_stream(struct dc *dc,
enum surface_update_type update_type;
struct dc_state *context;
struct dc_context *dc_ctx = dc->ctx;
- int i;
+ int i, j;
stream_status = dc_stream_get_status(stream);
context = dc->current_state;
@@ -2192,6 +2192,17 @@ void dc_commit_updates_for_stream(struct dc *dc,
copy_surface_update_to_plane(surface, &srf_updates[i]);
+ if (update_type >= UPDATE_TYPE_MED) {
+ for (j = 0; j < dc->res_pool->pipe_count; j++) {
+ struct pipe_ctx *pipe_ctx =
+ &context->res_ctx.pipe_ctx[j];
+
+ if (pipe_ctx->plane_state != surface)
+ continue;
+
+ resource_build_scaling_params(pipe_ctx);
+ }
+ }
}
copy_stream_update_to_stream(dc, context, stream, stream_update);
--
2.20.1
From: Mika Westerberg <[email protected]>
[ Upstream commit ad9001f2f41198784b0423646450ba2cb24793a3 ]
Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that consists
of a PCIe switch and two PCIe endpoints:
+-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
+-01.0-[04-36]-- DS hotplug port
+-02.0-[37]----00.0 xHCI controller
\-04.0-[38-6b]-- DS hotplug port
The root port (1b.0) and the PCIe switch downstream ports are all PCIe Gen3
so they support 8GT/s link speeds.
We wait for the PCIe hierarchy to enter D3cold (runtime):
pcieport 0000:00:1b.0: power state changed by ACPI to D3cold
When it wakes up from D3cold, according to the PCIe 5.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that we
must follow the rules in PCIe 5.0 section 6.6.1.
For the PCIe Gen3 ports we are dealing with here, the following applies:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
software must wait a minimum of 100 ms after Link training completes
before sending a Configuration Request to the device immediately below
that Port. Software can determine when Link training completes by polling
the Data Link Layer Link Active bit or by setting up an associated
interrupt (see Section 6.7.3.3).
Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):
0000:00:1b.0: wait for 100 ms after DLLLA is set before access to 0000:01:00.0
0000:02:00.0: wait for 100 ms after DLLLA is set before access to 0000:03:00.0
0000:02:02.0: wait for 100 ms after DLLLA is set before access to 0000:37:00.0
I've instrumented the kernel with some additional logging so we can see the
actual delays performed:
pcieport 0000:00:1b.0: power state changed by ACPI to D0
pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
For the switch upstream port (01:00.0 reachable through 00:1b.0 root port)
we wait for 100 ms but not taking into account the DLLLA requirement. We
then wait 10 ms for D3hot -> D0 transition of the root port and the two
downstream hotplug ports. This means that we deviate from what the spec
requires.
Performing the same check for system sleep (s2idle) transitions it turns
out to be even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8. there is a specific _DSM that allows the OS to skip the delays but
this platform does not provide the _DSM and does not go to S3 anyway so no
firmware is involved that could already handle these delays.
On this particular platform these delays are not actually needed because
there is an additional delay as part of the ACPI power resource that is
used to turn on power to the hierarchy but since that additional delay is
not required by any of standards (PCIe, ACPI) it is not present in the
Intel Ice Lake, for example where missing the mandatory delays causes
pciehp to start tearing down the stack too early (links are not yet
trained). Below is an example how it looks like when this happens:
pcieport 0000:83:04.0: pciehp: Slot(4): Card not present
pcieport 0000:87:04.0: PME# disabled
pcieport 0000:83:04.0: pciehp: pciehp_unconfigure_device: domain:bus:dev = 0000:86:00
pcieport 0000:86:00.0: Refused to change power state, currently in D3
pcieport 0000:86:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x201ff)
pcieport 0000:86:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
There is also one reported case (see the bugzilla link below) where the
missing delay causes xHCI on a Titan Ridge controller fail to runtime
resume when USB-C dock is plugged. This does not involve pciehp but instead
the PCI core fails to runtime resume the xHCI device:
pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:39:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
xhci_hcd 0000:39:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
Add a new function pci_bridge_wait_for_secondary_bus() that is called on
PCI core resume and runtime resume paths accordingly if the bridge entered
D3cold (and thus went through reset).
This is second attempt to add the missing delays. The previous solution in
c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") was
reverted because of two issues it caused:
1. One system become unresponsive after S3 resume due to PME service
spinning in pcie_pme_work_fn(). The root port in question reports that
the xHCI sent PME but the xHCI device itself does not have PME status
set. The PME status bit is never cleared in the root port resulting
the indefinite loop in pcie_pme_work_fn().
2. Slows down resume if the root/downstream port does not support Data
Link Layer Active Reporting because pcie_wait_for_link_delay() waits
1100 ms in that case.
This version should avoid the above issues because we restrict the delay to
happen only if the port went into D3cold.
Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203885
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Kai-Heng Feng <[email protected]>
Tested-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci-driver.c | 11 +++-
drivers/pci/pci.c | 121 ++++++++++++++++++++++++++++++++++++++-
drivers/pci/pci.h | 1 +
3 files changed, 130 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 0c3086793e4ec..5ea612a15550e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -919,6 +919,8 @@ static int pci_pm_resume_noirq(struct device *dev)
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
int error = 0;
+ pci_power_t prev_state = pci_dev->current_state;
+ bool skip_bus_pm = pci_dev->skip_bus_pm;
if (dev_pm_may_skip_resume(dev))
return 0;
@@ -937,12 +939,15 @@ static int pci_pm_resume_noirq(struct device *dev)
* configuration here and attempting to put them into D0 again is
* pointless, so avoid doing that.
*/
- if (!(pci_dev->skip_bus_pm && pm_suspend_no_platform()))
+ if (!(skip_bus_pm && pm_suspend_no_platform()))
pci_pm_default_resume_early(pci_dev);
pci_fixup_device(pci_fixup_resume_early, pci_dev);
pcie_pme_root_status_cleanup(pci_dev);
+ if (!skip_bus_pm && prev_state == PCI_D3cold)
+ pci_bridge_wait_for_secondary_bus(pci_dev);
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume_early(dev);
@@ -1333,6 +1338,7 @@ static int pci_pm_runtime_resume(struct device *dev)
int rc = 0;
struct pci_dev *pci_dev = to_pci_dev(dev);
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ pci_power_t prev_state = pci_dev->current_state;
/*
* Restoring config space is necessary even if the device is not bound
@@ -1348,6 +1354,9 @@ static int pci_pm_runtime_resume(struct device *dev)
pci_enable_wake(pci_dev, PCI_D0, false);
pci_fixup_device(pci_fixup_resume, pci_dev);
+ if (prev_state == PCI_D3cold)
+ pci_bridge_wait_for_secondary_bus(pci_dev);
+
if (pm && pm->runtime_resume)
rc = pm->runtime_resume(dev);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 94d6e120b4734..779132aef0fb9 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1019,8 +1019,6 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
* because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
- if (dev->d3cold_delay && !dev->imm_ready)
- msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
* whole hierarchy may be powered on into
@@ -4671,6 +4669,125 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
return pcie_wait_for_link_delay(pdev, active, 100);
}
+/*
+ * Find maximum D3cold delay required by all the devices on the bus. The
+ * spec says 100 ms, but firmware can lower it and we allow drivers to
+ * increase it as well.
+ *
+ * Called with @pci_bus_sem locked for reading.
+ */
+static int pci_bus_max_d3cold_delay(const struct pci_bus *bus)
+{
+ const struct pci_dev *pdev;
+ int min_delay = 100;
+ int max_delay = 0;
+
+ list_for_each_entry(pdev, &bus->devices, bus_list) {
+ if (pdev->d3cold_delay < min_delay)
+ min_delay = pdev->d3cold_delay;
+ if (pdev->d3cold_delay > max_delay)
+ max_delay = pdev->d3cold_delay;
+ }
+
+ return max(min_delay, max_delay);
+}
+
+/**
+ * pci_bridge_wait_for_secondary_bus - Wait for secondary bus to be accessible
+ * @dev: PCI bridge
+ *
+ * Handle necessary delays before access to the devices on the secondary
+ * side of the bridge are permitted after D3cold to D0 transition.
+ *
+ * For PCIe this means the delays in PCIe 5.0 section 6.6.1. For
+ * conventional PCI it means Tpvrh + Trhfa specified in PCI 3.0 section
+ * 4.3.2.
+ */
+void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
+{
+ struct pci_dev *child;
+ int delay;
+
+ if (pci_dev_is_disconnected(dev))
+ return;
+
+ if (!pci_is_bridge(dev) || !dev->bridge_d3)
+ return;
+
+ down_read(&pci_bus_sem);
+
+ /*
+ * We only deal with devices that are present currently on the bus.
+ * For any hot-added devices the access delay is handled in pciehp
+ * board_added(). In case of ACPI hotplug the firmware is expected
+ * to configure the devices before OS is notified.
+ */
+ if (!dev->subordinate || list_empty(&dev->subordinate->devices)) {
+ up_read(&pci_bus_sem);
+ return;
+ }
+
+ /* Take d3cold_delay requirements into account */
+ delay = pci_bus_max_d3cold_delay(dev->subordinate);
+ if (!delay) {
+ up_read(&pci_bus_sem);
+ return;
+ }
+
+ child = list_first_entry(&dev->subordinate->devices, struct pci_dev,
+ bus_list);
+ up_read(&pci_bus_sem);
+
+ /*
+ * Conventional PCI and PCI-X we need to wait Tpvrh + Trhfa before
+ * accessing the device after reset (that is 1000 ms + 100 ms). In
+ * practice this should not be needed because we don't do power
+ * management for them (see pci_bridge_d3_possible()).
+ */
+ if (!pci_is_pcie(dev)) {
+ pci_dbg(dev, "waiting %d ms for secondary bus\n", 1000 + delay);
+ msleep(1000 + delay);
+ return;
+ }
+
+ /*
+ * For PCIe downstream and root ports that do not support speeds
+ * greater than 5 GT/s need to wait minimum 100 ms. For higher
+ * speeds (gen3) we need to wait first for the data link layer to
+ * become active.
+ *
+ * However, 100 ms is the minimum and the PCIe spec says the
+ * software must allow at least 1s before it can determine that the
+ * device that did not respond is a broken device. There is
+ * evidence that 100 ms is not always enough, for example certain
+ * Titan Ridge xHCI controller does not always respond to
+ * configuration requests if we only wait for 100 ms (see
+ * https://bugzilla.kernel.org/show_bug.cgi?id=203885).
+ *
+ * Therefore we wait for 100 ms and check for the device presence.
+ * If it is still not present give it an additional 100 ms.
+ */
+ if (!pcie_downstream_port(dev))
+ return;
+
+ if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
+ pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
+ msleep(delay);
+ } else {
+ pci_dbg(dev, "waiting %d ms for downstream link, after activation\n",
+ delay);
+ if (!pcie_wait_for_link_delay(dev, true, delay)) {
+ /* Did not train, no need to wait any further */
+ return;
+ }
+ }
+
+ if (!pci_device_is_present(child)) {
+ pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);
+ msleep(delay);
+ }
+}
+
void pci_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 273d60cb0762d..a5adc2e2c351d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -107,6 +107,7 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev);
void pci_free_cap_save_buffers(struct pci_dev *dev);
bool pci_bridge_d3_possible(struct pci_dev *dev);
void pci_bridge_d3_update(struct pci_dev *dev);
+void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev);
static inline void pci_wakeup_event(struct pci_dev *dev)
{
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 7f327080364abccf923fa5a5b24e038eb0ba1407 ]
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macsec.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3226,11 +3226,11 @@ static int macsec_newlink(struct net *ne
struct netlink_ext_ack *extack)
{
struct macsec_dev *macsec = macsec_priv(dev);
+ rx_handler_func_t *rx_handler;
+ u8 icv_len = DEFAULT_ICV_LEN;
struct net_device *real_dev;
- int err;
+ int err, mtu;
sci_t sci;
- u8 icv_len = DEFAULT_ICV_LEN;
- rx_handler_func_t *rx_handler;
if (!tb[IFLA_LINK])
return -EINVAL;
@@ -3246,7 +3246,11 @@ static int macsec_newlink(struct net *ne
if (data && data[IFLA_MACSEC_ICV_LEN])
icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
- dev->mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ if (mtu < 0)
+ dev->mtu = 0;
+ else
+ dev->mtu = mtu;
rx_handler = rtnl_dereference(real_dev->rx_handler);
if (rx_handler && rx_handler != macsec_handle_frame)
From: Taehee Yoo <[email protected]>
[ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ]
In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.
bond0
|
+----+-----+
| |
macvlan0 macvlan1
| |
dummy0 dummy1
The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.
Test commands:
ip netns add nst
ip netns exec nst ip link add bond0 type bond
for i in {0..10}
do
ip netns exec nst ip link add dummy$i type dummy
ip netns exec nst ip link add macvlan$i link dummy$i \
type macvlan mode passthru
ip netns exec nst ip link set macvlan$i master bond0
done
ip netns del nst
Splat looks like:
[ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI
[ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532
[ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 40.590469][ T146] Workqueue: netns cleanup_net
[ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan]
[ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2
[ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246
[ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360
[ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421
[ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008
[ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a
[ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000
[ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0
[ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 40.603443][ T146] Call Trace:
[ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables]
[ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan]
[ 40.605212][ T146] ? __module_text_address+0x13/0x140
[ 40.605842][ T146] notifier_call_chain+0x90/0x160
[ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0
[ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0
[ 40.607762][ T146] ? __module_text_address+0x13/0x140
[ 40.608440][ T146] ? notifier_call_chain+0x90/0x160
[ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0
[ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0
[ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0
[ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding]
[ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0
[ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding]
[ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding]
[ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0
[ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding]
[ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding]
[ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding]
[ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding]
[ 40.617642][ T146] ? lock_downgrade+0x730/0x730
[ 40.618218][ T146] ? check_flags.part.42+0x450/0x450
[ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670
[ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180
[ 40.620117][ T146] ? wait_for_completion+0x250/0x250
[ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding]
[ 40.621460][ T146] ? __module_text_address+0x13/0x140
[ 40.622097][ T146] notifier_call_chain+0x90/0x160
[ 40.622806][ T146] rollback_registered_many+0x660/0xcf0
[ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780
[ 40.624290][ T146] ? notifier_call_chain+0x90/0x160
[ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180
[ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30
[ 40.626421][ T146] ? mutex_is_locked+0x13/0x50
[ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240
[ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0
[ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390
[ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40
[ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0
[ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0
[ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140
[ 40.631554][ T146] cleanup_net+0x441/0x890
[ ... ]
Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode")
Reported-by: [email protected]
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macvlan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1704,7 +1704,7 @@ static int macvlan_device_event(struct n
struct macvlan_dev,
list);
- if (macvlan_sync_address(vlan->dev, dev->dev_addr))
+ if (vlan && macvlan_sync_address(vlan->dev, dev->dev_addr))
return NOTIFY_BAD;
break;
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 0200b9f790b0fc9e9a42f685f5ad54b23fe959f4 ]
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition
time. The 20ms is not enough for some devices.
Intead of polling PLS or PLC, we can facilitate the port change event to
know that the link transits to U0 is completed.
While at it, also separate U0 and U3 case to make the code cleaner.
[variable rename to u3exit, and skip completion for usb2 ports -Mathias ]
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-hub.c | 44 +++++++++++++++++++++++++-----------
drivers/usb/host/xhci-mem.c | 1 +
drivers/usb/host/xhci-ring.c | 1 +
drivers/usb/host/xhci.h | 1 +
4 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 712cd44f05ace..02f52d4f74df8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1306,7 +1306,33 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
wIndex, link_state);
goto error;
}
+
+ if (link_state == USB_SS_PORT_LS_U0) {
+ if ((temp & PORT_PLS_MASK) == XDEV_U0)
+ break;
+
+ if (!((temp & PORT_PLS_MASK) == XDEV_U1 ||
+ (temp & PORT_PLS_MASK) == XDEV_U2 ||
+ (temp & PORT_PLS_MASK) == XDEV_U3)) {
+ xhci_warn(xhci, "Can only set port %d to U0 from U state\n",
+ wIndex);
+ goto error;
+ }
+ reinit_completion(&bus_state->u3exit_done[wIndex]);
+ xhci_set_link_state(xhci, ports[wIndex],
+ USB_SS_PORT_LS_U0);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
+ msecs_to_jiffies(100)))
+ xhci_dbg(xhci, "missing U0 port change event for port %d\n",
+ wIndex);
+ spin_lock_irqsave(&xhci->lock, flags);
+ temp = readl(ports[wIndex]->addr);
+ break;
+ }
+
if (link_state == USB_SS_PORT_LS_U3) {
+ int retries = 16;
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
wIndex + 1);
if (slot_id) {
@@ -1317,26 +1343,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_stop_device(xhci, slot_id, 1);
spin_lock_irqsave(&xhci->lock, flags);
}
- }
-
- xhci_set_link_state(xhci, ports[wIndex], link_state);
-
- spin_unlock_irqrestore(&xhci->lock, flags);
- if (link_state == USB_SS_PORT_LS_U3) {
- int retries = 16;
-
+ xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3);
+ spin_unlock_irqrestore(&xhci->lock, flags);
while (retries--) {
usleep_range(4000, 8000);
temp = readl(ports[wIndex]->addr);
if ((temp & PORT_PLS_MASK) == XDEV_U3)
break;
}
- }
- spin_lock_irqsave(&xhci->lock, flags);
-
- temp = readl(ports[wIndex]->addr);
- if (link_state == USB_SS_PORT_LS_U3)
+ spin_lock_irqsave(&xhci->lock, flags);
+ temp = readl(ports[wIndex]->addr);
bus_state->suspended_ports |= 1 << wIndex;
+ }
break;
case USB_PORT_FEAT_POWER:
/*
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 884c601bfa15f..9764122c9cdf2 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2552,6 +2552,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->usb3_rhub.bus_state.resume_done[i] = 0;
/* Only the USB 2.0 completions will ever be used. */
init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]);
+ init_completion(&xhci->usb3_rhub.bus_state.u3exit_done[i]);
}
if (scratchpad_alloc(xhci, flags))
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f7a190fb2353d..a952d99f0456b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1673,6 +1673,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
(portsc & PORT_PLS_MASK) == XDEV_U1 ||
(portsc & PORT_PLS_MASK) == XDEV_U2)) {
xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+ complete(&bus_state->u3exit_done[hcd_portnum]);
/* We've just brought the device into U0/1/2 through either the
* Resume state after a device remote wakeup, or through the
* U3Exit state after a host-initiated resume. If it's a device
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 98b98a0cd2a8b..3ad4f80960d08 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1694,6 +1694,7 @@ struct xhci_bus_state {
/* Which ports are waiting on RExit to U0 transition. */
unsigned long rexit_ports;
struct completion rexit_done[USB_MAXCHILDREN];
+ struct completion u3exit_done[USB_MAXCHILDREN];
};
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 2c25b07e5ec119cab609e41407a1fb3fa61442f5 ]
The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().
Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Florian Fainelli <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-bcm2835.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index 91e24f01b54ed..d78f86f8e4621 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -166,6 +166,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
pc->chip.dev = &pdev->dev;
pc->chip.ops = &bcm2835_pwm_ops;
+ pc->chip.base = -1;
pc->chip.npwm = 2;
pc->chip.of_xlate = of_pwm_xlate_with_flags;
pc->chip.of_pwm_n_cells = 3;
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit c8b78f24c1247b7bd0882885c672d9dec5800bc6 ]
The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 243f683bc02a7..e62e1d7815aa9 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -591,6 +591,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* MPMAN MPWIN895CL */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{ /* MSI S100 tablet */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
--
2.20.1
From: Xiyu Yang <[email protected]>
[ Upstream commit f35d12971b4d814cdb2f659d76b42f0c545270b6 ]
x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a
reference of the specified x25_neigh object to "nb" with increased
refcnt.
When x25_lapb_receive_frame() returns, local variable "nb" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of
x25_lapb_receive_frame(). When pskb_may_pull() returns false, the
function forgets to decrease the refcnt increased by x25_get_neigh(),
causing a refcnt leak.
Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns
false.
Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/x25/x25_dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/x25/x25_dev.c
+++ b/net/x25/x25_dev.c
@@ -115,8 +115,10 @@ int x25_lapb_receive_frame(struct sk_buf
goto drop;
}
- if (!pskb_may_pull(skb, 1))
+ if (!pskb_may_pull(skb, 1)) {
+ x25_neigh_put(nb);
return 0;
+ }
switch (skb->data[0]) {
From: Eric Dumazet <[email protected]>
[ Upstream commit a1211bf9a7774706722ba3b18c6157d980319f79 ]
skb->sk does not always point to a full blown socket,
we need to use sk_fullsock() before accessing fields which
only make sense on full socket.
BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630
CPU: 1 PID: 9630 Comm: syz-executor.5 Not tainted 5.7.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
__kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
etf_enqueue_timesortedlist+0x389/0x740 net/sched/sch_etf.c:170
__dev_xmit_skb net/core/dev.c:3710 [inline]
__dev_queue_xmit+0x154a/0x30a0 net/core/dev.c:4021
neigh_hh_output include/net/neighbour.h:499 [inline]
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0xfb5/0x25b0 net/ipv6/ip6_output.c:117
__ip6_finish_output+0x442/0xab0 net/ipv6/ip6_output.c:143
ip6_finish_output+0x34/0x1f0 net/ipv6/ip6_output.c:153
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x239/0x810 net/ipv6/ip6_output.c:176
dst_output include/net/dst.h:435 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip6_xmit+0xe1a/0x2090 net/ipv6/ip6_output.c:280
tcp_v6_send_synack+0x4e7/0x960 net/ipv6/tcp_ipv6.c:521
tcp_rtx_synack+0x10d/0x1a0 net/ipv4/tcp_output.c:3916
inet_rtx_syn_ack net/ipv4/inet_connection_sock.c:669 [inline]
reqsk_timer_handler+0x4c2/0xb40 net/ipv4/inet_connection_sock.c:763
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1405
expire_timers kernel/time/timer.c:1450 [inline]
__run_timers kernel/time/timer.c:1774 [inline]
__run_timers kernel/time/timer.c:1741 [inline]
run_timer_softirq+0x623/0x1600 kernel/time/timer.c:1787
__do_softirq+0x26c/0x9f7 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x192/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x19e/0x600 arch/x86/kernel/apic/apic.c:1140
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:des_encrypt+0x157/0x9c0 lib/crypto/des.c:792
Code: 85 22 06 00 00 41 31 dc 41 8b 4d 04 44 89 e2 41 83 e4 3f 4a 8d 3c a5 60 72 72 88 81 e2 3f 3f 3f 3f 48 89 f8 48 c1 e8 03 31 d9 <0f> b6 34 28 48 89 f8 c1 c9 04 83 e0 07 83 c0 03 40 38 f0 7c 09 40
RSP: 0018:ffffc90003b5f6c0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff10e4e55 RBX: 00000000d2f846d0 RCX: 00000000d2f846d0
RDX: 0000000012380612 RSI: ffffffff839863ca RDI: ffffffff887272a8
RBP: dffffc0000000000 R08: ffff888091d0a380 R09: 0000000000800081
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000012
R13: ffff8880a8ae8078 R14: 00000000c545c93e R15: 0000000000000006
cipher_crypt_one crypto/cipher.c:75 [inline]
crypto_cipher_encrypt_one+0x124/0x210 crypto/cipher.c:82
crypto_cbcmac_digest_update+0x1b5/0x250 crypto/ccm.c:830
crypto_shash_update+0xc4/0x120 crypto/shash.c:119
shash_ahash_update+0xa3/0x110 crypto/shash.c:246
crypto_ahash_update include/crypto/hash.h:547 [inline]
hash_sendmsg+0x518/0xad0 crypto/algif_hash.c:102
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x308/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmmsg+0x195/0x480 net/socket.c:2506
__do_sys_sendmmsg net/socket.c:2535 [inline]
__se_sys_sendmmsg net/socket.c:2532 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2532
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f6d9528ec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004fc080 RCX: 000000000045c829
RDX: 0000000000000001 RSI: 0000000020002640 RDI: 0000000000000004
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000008d7 R14: 00000000004cb7aa R15: 00007f6d9528f6d4
Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue")
Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Vinicius Costa Gomes <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_etf.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/net/sched/sch_etf.c
+++ b/net/sched/sch_etf.c
@@ -82,7 +82,7 @@ static bool is_packet_valid(struct Qdisc
if (q->skip_sock_check)
goto skip;
- if (!sk)
+ if (!sk || !sk_fullsock(sk))
return false;
if (!sock_flag(sk, SOCK_TXTIME))
@@ -137,8 +137,9 @@ static void report_sock_error(struct sk_
struct sock_exterr_skb *serr;
struct sk_buff *clone;
ktime_t txtime = skb->tstamp;
+ struct sock *sk = skb->sk;
- if (!skb->sk || !(skb->sk->sk_txtime_report_errors))
+ if (!sk || !sk_fullsock(sk) || !(sk->sk_txtime_report_errors))
return;
clone = skb_clone(skb, GFP_ATOMIC);
@@ -154,7 +155,7 @@ static void report_sock_error(struct sk_
serr->ee.ee_data = (txtime >> 32); /* high part of tstamp */
serr->ee.ee_info = txtime; /* low part of tstamp */
- if (sock_queue_err_skb(skb->sk, clone))
+ if (sock_queue_err_skb(sk, clone))
kfree_skb(clone);
}
From: David Ahern <[email protected]>
[ Upstream commit 2c1dd4c110627c2a4f006643f074119205cfcff4 ]
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/fib_tests.sh | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -618,16 +618,22 @@ fib_nexthop_test()
fib_suppress_test()
{
+ echo
+ echo "FIB rule with suppress_prefixlength"
+ setup
+
$IP link add dummy1 type dummy
$IP link set dummy1 up
$IP -6 route add default dev dummy1
$IP -6 rule add table main suppress_prefixlength 0
- ping -f -c 1000 -W 1 1234::1 || true
+ ping -f -c 1000 -W 1 1234::1 >/dev/null 2>&1
$IP -6 rule del table main suppress_prefixlength 0
$IP link del dummy1
# If we got here without crashing, we're good.
- return 0
+ log_test 0 0 "FIB rule suppress test"
+
+ cleanup
}
################################################################################
From: Eric Dumazet <[email protected]>
[ Upstream commit 9bacd256f1354883d3c1402655153367982bba49 ]
TCP stack is dumb in how it cooks its output packets.
Depending on MAX_HEADER value, we might chose a bad ending point
for the headers.
If we align the end of TCP headers to cache line boundary, we
make sure to always use the smallest number of cache lines,
which always help.
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -50,7 +50,7 @@ extern struct inet_hashinfo tcp_hashinfo
extern struct percpu_counter tcp_orphan_count;
void tcp_time_wait(struct sock *sk, int state, int timeo);
-#define MAX_TCP_HEADER (128 + MAX_HEADER)
+#define MAX_TCP_HEADER L1_CACHE_ALIGN(128 + MAX_HEADER)
#define MAX_TCP_OPTION_SPACE 40
#define TCP_MIN_SND_MSS 48
#define TCP_MIN_GSO_SIZE (TCP_MIN_SND_MSS - MAX_TCP_OPTION_SPACE)
From: Dan Carpenter <[email protected]>
[ Upstream commit c391eb8366ae052d571bb2841f1ccb4d39f3ceb8 ]
The mlxsw_sp_acl_rulei_create() function is supposed to return an error
pointer from mlxsw_afa_block_create(). The problem is that these
functions both return NULL instead of error pointers. Half the callers
expect NULL and half expect error pointers so it could lead to a NULL
dereference on failure.
This patch changes both of them to return error pointers and changes all
the callers which checked for NULL to check for IS_ERR() instead.
Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c | 4 ++--
drivers/net/ethernet/mellanox/mlxsw/spectrum2_acl_tcam.c | 4 ++--
drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/spectrum_mr_tcam.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
@@ -316,7 +316,7 @@ struct mlxsw_afa_block *mlxsw_afa_block_
block = kzalloc(sizeof(*block), GFP_KERNEL);
if (!block)
- return NULL;
+ return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&block->resource_list);
block->afa = mlxsw_afa;
@@ -344,7 +344,7 @@ err_second_set_create:
mlxsw_afa_set_destroy(block->first_set);
err_first_set_create:
kfree(block);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL(mlxsw_afa_block_create);
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum2_acl_tcam.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum2_acl_tcam.c
@@ -88,8 +88,8 @@ static int mlxsw_sp2_acl_tcam_init(struc
* to be written using PEFA register to all indexes for all regions.
*/
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block) {
- err = -ENOMEM;
+ if (IS_ERR(afa_block)) {
+ err = PTR_ERR(afa_block);
goto err_afa_block;
}
err = mlxsw_afa_block_continue(afa_block);
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c
@@ -444,7 +444,7 @@ mlxsw_sp_acl_rulei_create(struct mlxsw_s
rulei = kzalloc(sizeof(*rulei), GFP_KERNEL);
if (!rulei)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (afa_block) {
rulei->act_block = afa_block;
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr_tcam.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_mr_tcam.c
@@ -199,8 +199,8 @@ mlxsw_sp_mr_tcam_afa_block_create(struct
int err;
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(afa_block))
+ return afa_block;
err = mlxsw_afa_block_append_allocated_counter(afa_block,
counter_index);
From: Kevin Barnett <[email protected]>
[ Upstream commit 5b083b305b49f65269b888885455b8c0cf1a52e4 ]
Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.
Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhilda
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Signed-off-by: Kevin Barnett <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/smartpqi/smartpqi.h | 1 -
drivers/scsi/smartpqi/smartpqi_init.c | 99 ++++-----------------------
2 files changed, 12 insertions(+), 88 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 2aa81b22f2695..7a3a942b40df0 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -907,7 +907,6 @@ struct pqi_scsi_dev {
u8 scsi3addr[8];
__be64 wwid;
u8 volume_id[16];
- u8 unique_id[16];
u8 is_physical_device : 1;
u8 is_external_raid_device : 1;
u8 is_expander_smp_device : 1;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 793793343950e..5ae074505386a 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -648,79 +648,6 @@ static inline int pqi_scsi_inquiry(struct pqi_ctrl_info *ctrl_info,
buffer, buffer_length, vpd_page, NULL, NO_TIMEOUT);
}
-static bool pqi_vpd_page_supported(struct pqi_ctrl_info *ctrl_info,
- u8 *scsi3addr, u16 vpd_page)
-{
- int rc;
- int i;
- int pages;
- unsigned char *buf, bufsize;
-
- buf = kzalloc(256, GFP_KERNEL);
- if (!buf)
- return false;
-
- /* Get the size of the page list first */
- rc = pqi_scsi_inquiry(ctrl_info, scsi3addr,
- VPD_PAGE | SCSI_VPD_SUPPORTED_PAGES,
- buf, SCSI_VPD_HEADER_SZ);
- if (rc != 0)
- goto exit_unsupported;
-
- pages = buf[3];
- if ((pages + SCSI_VPD_HEADER_SZ) <= 255)
- bufsize = pages + SCSI_VPD_HEADER_SZ;
- else
- bufsize = 255;
-
- /* Get the whole VPD page list */
- rc = pqi_scsi_inquiry(ctrl_info, scsi3addr,
- VPD_PAGE | SCSI_VPD_SUPPORTED_PAGES,
- buf, bufsize);
- if (rc != 0)
- goto exit_unsupported;
-
- pages = buf[3];
- for (i = 1; i <= pages; i++)
- if (buf[3 + i] == vpd_page)
- goto exit_supported;
-
-exit_unsupported:
- kfree(buf);
- return false;
-
-exit_supported:
- kfree(buf);
- return true;
-}
-
-static int pqi_get_device_id(struct pqi_ctrl_info *ctrl_info,
- u8 *scsi3addr, u8 *device_id, int buflen)
-{
- int rc;
- unsigned char *buf;
-
- if (!pqi_vpd_page_supported(ctrl_info, scsi3addr, SCSI_VPD_DEVICE_ID))
- return 1; /* function not supported */
-
- buf = kzalloc(64, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- rc = pqi_scsi_inquiry(ctrl_info, scsi3addr,
- VPD_PAGE | SCSI_VPD_DEVICE_ID,
- buf, 64);
- if (rc == 0) {
- if (buflen > 16)
- buflen = 16;
- memcpy(device_id, &buf[SCSI_VPD_DEVICE_ID_IDX], buflen);
- }
-
- kfree(buf);
-
- return rc;
-}
-
static int pqi_identify_physical_device(struct pqi_ctrl_info *ctrl_info,
struct pqi_scsi_dev *device,
struct bmic_identify_physical_device *buffer,
@@ -1405,14 +1332,6 @@ static int pqi_get_device_info(struct pqi_ctrl_info *ctrl_info,
}
}
- if (pqi_get_device_id(ctrl_info, device->scsi3addr,
- device->unique_id, sizeof(device->unique_id)) < 0)
- dev_warn(&ctrl_info->pci_dev->dev,
- "Can't get device id for scsi %d:%d:%d:%d\n",
- ctrl_info->scsi_host->host_no,
- device->bus, device->target,
- device->lun);
-
out:
kfree(buffer);
@@ -6319,7 +6238,7 @@ static ssize_t pqi_unique_id_show(struct device *dev,
struct scsi_device *sdev;
struct pqi_scsi_dev *device;
unsigned long flags;
- unsigned char uid[16];
+ u8 unique_id[16];
sdev = to_scsi_device(dev);
ctrl_info = shost_to_hba(sdev->host);
@@ -6332,16 +6251,22 @@ static ssize_t pqi_unique_id_show(struct device *dev,
flags);
return -ENODEV;
}
- memcpy(uid, device->unique_id, sizeof(uid));
+
+ if (device->is_physical_device) {
+ memset(unique_id, 0, 8);
+ memcpy(unique_id + 8, &device->wwid, sizeof(device->wwid));
+ } else {
+ memcpy(unique_id, device->volume_id, sizeof(device->volume_id));
+ }
spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags);
return snprintf(buffer, PAGE_SIZE,
"%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X\n",
- uid[0], uid[1], uid[2], uid[3],
- uid[4], uid[5], uid[6], uid[7],
- uid[8], uid[9], uid[10], uid[11],
- uid[12], uid[13], uid[14], uid[15]);
+ unique_id[0], unique_id[1], unique_id[2], unique_id[3],
+ unique_id[4], unique_id[5], unique_id[6], unique_id[7],
+ unique_id[8], unique_id[9], unique_id[10], unique_id[11],
+ unique_id[12], unique_id[13], unique_id[14], unique_id[15]);
}
static ssize_t pqi_lunid_show(struct device *dev,
--
2.20.1
From: Sabrina Dubroca <[email protected]>
[ Upstream commit cc8e7c69db4dcc565ed3020f97ddd6debab6cbe8 ]
IFLA_VXLAN_* attributes are in the data array, which is correctly
used when fetching the value, but not when setting the extended
ack. Because IFLA_VXLAN_MAX < IFLA_MAX, we avoid out of bounds
array accesses, but we don't provide a pointer to the invalid
attribute to userspace.
Fixes: 653ef6a3e4af ("vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error reporting")
Fixes: b4d3069783bc ("vxlan: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3144,7 +3144,7 @@ static int vxlan_validate(struct nlattr
u32 id = nla_get_u32(data[IFLA_VXLAN_ID]);
if (id >= VXLAN_N_VID) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_ID],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_ID],
"VXLAN ID must be lower than 16777216");
return -ERANGE;
}
@@ -3155,7 +3155,7 @@ static int vxlan_validate(struct nlattr
= nla_data(data[IFLA_VXLAN_PORT_RANGE]);
if (ntohs(p->high) < ntohs(p->low)) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_PORT_RANGE],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_PORT_RANGE],
"Invalid source port range");
return -EINVAL;
}
@@ -3165,7 +3165,7 @@ static int vxlan_validate(struct nlattr
enum ifla_vxlan_df df = nla_get_u8(data[IFLA_VXLAN_DF]);
if (df < 0 || df > VXLAN_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_DF],
"Invalid DF attribute");
return -EINVAL;
}
From: David Ahern <[email protected]>
[ Upstream commit 7c74b0bec918c1e0ca0b4208038c156eacf8f13f ]
A user reported [0] hitting the WARN_ON in fib_info_nh:
[ 8633.839816] ------------[ cut here ]------------
[ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381
...
[ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381
...
[ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286
[ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe
[ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000
[ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000
[ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0
[ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60
[ 8633.839857] FS: 00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000
[ 8633.839858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0
[ 8633.839867] Call Trace:
[ 8633.839871] ip_route_output_key_hash_rcu+0x421/0x890
[ 8633.839873] ip_route_output_key_hash+0x5e/0x80
[ 8633.839876] ip_route_output_flow+0x1a/0x50
[ 8633.839878] __ip4_datagram_connect+0x154/0x310
[ 8633.839880] ip4_datagram_connect+0x28/0x40
[ 8633.839882] __sys_connect+0xd6/0x100
...
The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.
Add test case that covers the affected code path.
[0] https://github.com/FRRouting/frr/issues/6089
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 6 +++---
tools/testing/selftests/net/fib_nexthops.sh | 23 +++++++++++++++++++++++
2 files changed, 26 insertions(+), 3 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1999,7 +1999,7 @@ static void fib_select_default(const str
hlist_for_each_entry_rcu(fa, fa_head, fa_list) {
struct fib_info *next_fi = fa->fa_info;
- struct fib_nh *nh;
+ struct fib_nh_common *nhc;
if (fa->fa_slen != slen)
continue;
@@ -2022,8 +2022,8 @@ static void fib_select_default(const str
fa->fa_type != RTN_UNICAST)
continue;
- nh = fib_info_nh(next_fi, 0);
- if (!nh->fib_nh_gw4 || nh->fib_nh_scope != RT_SCOPE_LINK)
+ nhc = fib_info_nhc(next_fi, 0);
+ if (!nhc->nhc_gw_family || nhc->nhc_scope != RT_SCOPE_LINK)
continue;
fib_alias_accessed(fa);
--- a/tools/testing/selftests/net/fib_nexthops.sh
+++ b/tools/testing/selftests/net/fib_nexthops.sh
@@ -749,6 +749,29 @@ ipv4_fcnal_runtime()
run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
log_test $? 0 "Ping - multipath"
+ run_cmd "$IP ro delete 172.16.101.1/32 nhid 122"
+
+ #
+ # multiple default routes
+ # - tests fib_select_default
+ run_cmd "$IP nexthop add id 501 via 172.16.1.2 dev veth1"
+ run_cmd "$IP ro add default nhid 501"
+ run_cmd "$IP ro add default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh first"
+
+ # flip the order
+ run_cmd "$IP ro del default nhid 501"
+ run_cmd "$IP ro del default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "$IP ro add default via 172.16.1.2 dev veth1 metric 20"
+ run_cmd "$IP nexthop replace id 501 via 172.16.1.3 dev veth1"
+ run_cmd "$IP ro add default nhid 501 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh second"
+
+ run_cmd "$IP nexthop delete nhid 501"
+ run_cmd "$IP ro del default"
+
#
# IPv4 with blackhole nexthops
#
From: Takashi Iwai <[email protected]>
[ Upstream commit a8cf44f085ac12c0b5b8750ebb3b436c7f455419 ]
The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
This patch reverts the corresponding entry as a temporary solution.
Although Zenith II and co will see get the empty HD-audio bus again,
it'd be merely resource wastes and won't affect the functionality,
so it's no end of the world. We'll need to address this later,
e.g. by either switching to DMI string matching or using PCI ID &
SSID pairs.
Fixes: 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist")
Reported-by: Johnathan Smithinovic <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 72bbfeddea24a..dd77b9ffe5fd9 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2024,7 +2024,6 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
* should be ignored from the beginning.
*/
static const struct snd_pci_quirk driver_blacklist[] = {
- SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0),
SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
{}
--
2.20.1
From: Takashi Iwai <[email protected]>
[ Upstream commit a43c1c41bc5145971d06edc42a6b1e8faa0e2bc3 ]
TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need
yet more quirks for the proper control names.
This patch provides the mapping table for those boards, correcting the
FU names for volume and mute controls as well as the terminal names
for jack controls. It also improves build_connector_control() not to
add the directional suffix blindly if the string is given from the
mapping table.
With this patch applied, the new UCM profiles will be effective.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/mixer.c | 12 +++++++++---
sound/usb/mixer_maps.c | 24 +++++++++++++++++++++---
sound/usb/quirks-table.h | 14 ++++++++++++++
3 files changed, 44 insertions(+), 6 deletions(-)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 5661994e13e7d..f9586a6ea05b6 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1755,8 +1755,10 @@ static void build_connector_control(struct usb_mixer_interface *mixer,
{
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *cval;
+ const struct usbmix_name_map *map;
- if (check_ignored_ctl(find_map(imap, term->id, 0)))
+ map = find_map(imap, term->id, 0);
+ if (check_ignored_ctl(map))
return;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
@@ -1788,8 +1790,12 @@ static void build_connector_control(struct usb_mixer_interface *mixer,
usb_mixer_elem_info_free(cval);
return;
}
- get_connector_control_name(mixer, term, is_input, kctl->id.name,
- sizeof(kctl->id.name));
+
+ if (check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name)))
+ strlcat(kctl->id.name, " Jack", sizeof(kctl->id.name));
+ else
+ get_connector_control_name(mixer, term, is_input, kctl->id.name,
+ sizeof(kctl->id.name));
kctl->private_free = snd_usb_mixer_elem_free;
snd_usb_mixer_add_control(&cval->head, kctl);
}
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 3a54ca04ec4c0..28eec0e0aa5e4 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -359,6 +359,24 @@ static const struct usbmix_name_map asus_rog_map[] = {
{}
};
+/* TRX40 mobos with Realtek ALC1220-VB */
+static const struct usbmix_name_map trx40_mobo_map[] = {
+ { 18, NULL }, /* OT, IEC958 - broken response, disabled */
+ { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */
+ { 16, "Speaker" }, /* OT */
+ { 22, "Speaker Playback" }, /* FU */
+ { 7, "Line" }, /* IT */
+ { 19, "Line Capture" }, /* FU */
+ { 17, "Front Headphone" }, /* OT */
+ { 23, "Front Headphone Playback" }, /* FU */
+ { 8, "Mic" }, /* IT */
+ { 20, "Mic Capture" }, /* FU */
+ { 9, "Front Mic" }, /* IT */
+ { 21, "Front Mic Capture" }, /* FU */
+ { 24, "IEC958 Playback" }, /* FU */
+ {}
+};
+
/*
* Control map entries
*/
@@ -480,7 +498,7 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
},
{ /* Gigabyte TRX40 Aorus Pro WiFi */
.id = USB_ID(0x0414, 0xa002),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
},
{ /* ASUS ROG Zenith II */
.id = USB_ID(0x0b05, 0x1916),
@@ -492,11 +510,11 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
},
{ /* MSI TRX40 Creator */
.id = USB_ID(0x0db0, 0x0d64),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
},
{ /* MSI TRX40 */
.id = USB_ID(0x0db0, 0x543d),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
},
{ 0 } /* terminator */
};
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index dcaf9eed9a415..8c2f5c23e1b43 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3635,4 +3635,18 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
},
+#define ALC1220_VB_DESKTOP(vend, prod) { \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \
+ .vendor_name = "Realtek", \
+ .product_name = "ALC1220-VB-DT", \
+ .profile_name = "Realtek-ALC1220-VB-Desktop", \
+ .ifnum = QUIRK_NO_INTERFACE \
+ } \
+}
+ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */
+ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */
+ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */
+#undef ALC1220_VB_DESKTOP
+
#undef USB_DEVICE_VENDOR_SPEC
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 2e97b0cd1651a270f3a3fcf42115c51f3284c049 ]
When VLAN is enabled, and an ARL search is issued, we also need to
compare the full {MAC,VID} tuple before returning a successful search
result.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1472,6 +1472,9 @@ static int b53_arl_read(struct b53_devic
continue;
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
+ if (dev->vlan_enabled &&
+ ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+ continue;
*idx = i;
}
From: Marc Zyngier <[email protected]>
[ Upstream commit f0212a5ebfa6cd789ab47666b9cc169e6e688732 ]
Running with KASAN on a VIM3L systems leads to the following splat
when probing the Ethernet device:
==================================================================
BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G E 5.7.0-rc1-00101-g8624b7577b9c #781
Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020
Call trace:
dump_backtrace+0x0/0x2a0
show_stack+0x20/0x30
dump_stack+0xec/0x148
print_address_description.isra.12+0x70/0x35c
__kasan_report+0xfc/0x1d4
kasan_report+0x4c/0x68
__asan_load4+0x9c/0xd8
_get_maxdiv+0x74/0xd8
clk_divider_bestdiv+0x74/0x5e0
clk_divider_round_rate+0x80/0x1a8
clk_core_determine_round_nolock.part.9+0x9c/0xd0
clk_core_round_rate_nolock+0xf0/0x108
clk_hw_round_rate+0xac/0xf0
clk_factor_round_rate+0xb8/0xd0
clk_core_determine_round_nolock.part.9+0x9c/0xd0
clk_core_round_rate_nolock+0xf0/0x108
clk_core_round_rate_nolock+0xbc/0x108
clk_core_set_rate_nolock+0xc4/0x2e8
clk_set_rate+0x58/0xe0
meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b]
platform_drv_probe+0x78/0xd8
really_probe+0x158/0x610
driver_probe_device+0x140/0x1b0
device_driver_attach+0xa4/0xb0
__driver_attach+0xcc/0x1c8
bus_for_each_dev+0xf4/0x168
driver_attach+0x3c/0x50
bus_add_driver+0x238/0x2e8
driver_register+0xc8/0x1e8
__platform_driver_register+0x88/0x98
meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b]
do_one_initcall+0xa8/0x328
do_init_module+0xe8/0x368
load_module+0x3300/0x36b0
__do_sys_finit_module+0x120/0x1a8
__arm64_sys_finit_module+0x4c/0x60
el0_svc_common.constprop.2+0xe4/0x268
do_el0_svc+0x98/0xa8
el0_svc+0x24/0x68
el0_sync_handler+0x12c/0x318
el0_sync+0x158/0x180
The buggy address belongs to the variable:
div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b]
Memory state around the buggy address:
ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00
ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
>ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa
^
ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa
ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa
==================================================================
Digging into this indeed shows that the clock divider array is
lacking a final fence, and that the clock subsystems goes in the
weeds. Oh well.
Let's add the empty structure that indicates the end of the array.
Fixes: bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
Signed-off-by: Marc Zyngier <[email protected]>
Cc: Martin Blumenstingl <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -119,6 +119,7 @@ static int meson8b_init_rgmii_tx_clk(str
{ .div = 5, .val = 5, },
{ .div = 6, .val = 6, },
{ .div = 7, .val = 7, },
+ { /* end of array */ }
};
clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
From: Waiman Long <[email protected]>
[ Upstream commit 4f0882491a148059a52480e753b7f07fc550e188 ]
By allocating a kernel buffer with a user-supplied buffer length, it
is possible that a false positive ENOMEM error may be returned because
the user-supplied length is just too large even if the system do have
enough memory to hold the actual key data.
Moreover, if the buffer length is larger than the maximum amount of
memory that can be returned by kmalloc() (2^(MAX_ORDER-1) number of
pages), a warning message will also be printed.
To reduce this possibility, we set a threshold (PAGE_SIZE) over which we
do check the actual key length first before allocating a buffer of the
right size to hold it. The threshold is arbitrary, it is just used to
trigger a buffer length check. It does not limit the actual key length
as long as there is enough memory to satisfy the memory request.
To further avoid large buffer allocation failure due to page
fragmentation, kvmalloc() is used to allocate the buffer so that vmapped
pages can be used when there is not a large enough contiguous set of
pages available for allocation.
In the extremely unlikely scenario that the key keeps on being changed
and made longer (still <= buflen) in between 2 __keyctl_read_key()
calls, the __keyctl_read_key() calling loop in keyctl_read_key() may
have to be iterated a large number of times, but definitely not infinite.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/keys/internal.h | 12 +++++++++
security/keys/keyctl.c | 58 +++++++++++++++++++++++++++++-----------
2 files changed, 55 insertions(+), 15 deletions(-)
diff --git a/security/keys/internal.h b/security/keys/internal.h
index c039373488bd9..7e99149436167 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -16,6 +16,8 @@
#include <linux/keyctl.h>
#include <linux/refcount.h>
#include <linux/compat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
struct iovec;
@@ -349,4 +351,14 @@ static inline void key_check(const struct key *key)
#endif
+/*
+ * Helper function to clear and free a kvmalloc'ed memory object.
+ */
+static inline void __kvzfree(const void *addr, size_t len)
+{
+ if (addr) {
+ memset((void *)addr, 0, len);
+ kvfree(addr);
+ }
+}
#endif /* _INTERNAL_H */
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 106e16f9006b4..5e01192e222a0 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -339,7 +339,7 @@ long keyctl_update_key(key_serial_t id,
payload = NULL;
if (plen) {
ret = -ENOMEM;
- payload = kmalloc(plen, GFP_KERNEL);
+ payload = kvmalloc(plen, GFP_KERNEL);
if (!payload)
goto error;
@@ -360,7 +360,7 @@ long keyctl_update_key(key_serial_t id,
key_ref_put(key_ref);
error2:
- kzfree(payload);
+ __kvzfree(payload, plen);
error:
return ret;
}
@@ -827,7 +827,8 @@ long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen)
struct key *key;
key_ref_t key_ref;
long ret;
- char *key_data;
+ char *key_data = NULL;
+ size_t key_data_len;
/* find the key first */
key_ref = lookup_user_key(keyid, 0, 0);
@@ -878,24 +879,51 @@ can_read_key:
* Allocating a temporary buffer to hold the keys before
* transferring them to user buffer to avoid potential
* deadlock involving page fault and mmap_sem.
+ *
+ * key_data_len = (buflen <= PAGE_SIZE)
+ * ? buflen : actual length of key data
+ *
+ * This prevents allocating arbitrary large buffer which can
+ * be much larger than the actual key length. In the latter case,
+ * at least 2 passes of this loop is required.
*/
- key_data = kmalloc(buflen, GFP_KERNEL);
+ key_data_len = (buflen <= PAGE_SIZE) ? buflen : 0;
+ for (;;) {
+ if (key_data_len) {
+ key_data = kvmalloc(key_data_len, GFP_KERNEL);
+ if (!key_data) {
+ ret = -ENOMEM;
+ goto key_put_out;
+ }
+ }
- if (!key_data) {
- ret = -ENOMEM;
- goto key_put_out;
- }
- ret = __keyctl_read_key(key, key_data, buflen);
+ ret = __keyctl_read_key(key, key_data, key_data_len);
+
+ /*
+ * Read methods will just return the required length without
+ * any copying if the provided length isn't large enough.
+ */
+ if (ret <= 0 || ret > buflen)
+ break;
+
+ /*
+ * The key may change (unlikely) in between 2 consecutive
+ * __keyctl_read_key() calls. In this case, we reallocate
+ * a larger buffer and redo the key read when
+ * key_data_len < ret <= buflen.
+ */
+ if (ret > key_data_len) {
+ if (unlikely(key_data))
+ __kvzfree(key_data, key_data_len);
+ key_data_len = ret;
+ continue; /* Allocate buffer */
+ }
- /*
- * Read methods will just return the required length without
- * any copying if the provided length isn't large enough.
- */
- if (ret > 0 && ret <= buflen) {
if (copy_to_user(buffer, key_data, ret))
ret = -EFAULT;
+ break;
}
- kzfree(key_data);
+ __kvzfree(key_data, key_data_len);
key_put_out:
key_put(key);
--
2.20.1
From: Lars-Peter Clausen <[email protected]>
commit e44ec7794d88f918805d700240211a9ec05ed89d upstream.
The check for shutting down the second ADC is inverted. This causes it to
be powered down when it should be enabled. As a result channels that are
supposed to be handled by the second ADC return invalid conversion results.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -722,13 +722,14 @@ static int xadc_power_adc_b(struct xadc
{
uint16_t val;
+ /* Powerdown the ADC-B when it is not needed. */
switch (seq_mode) {
case XADC_CONF1_SEQ_SIMULTANEOUS:
case XADC_CONF1_SEQ_INDEPENDENT:
- val = XADC_CONF2_PD_ADC_B;
+ val = 0;
break;
default:
- val = 0;
+ val = XADC_CONF2_PD_ADC_B;
break;
}
From: Xiyu Yang <[email protected]>
[ Upstream commit d03f228470a8c0a22b774d1f8d47071e0de4f6dd ]
nr_add_node() invokes nr_neigh_get_dev(), which returns a local
reference of the nr_neigh object to "nr_neigh" with increased refcnt.
When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The issue happens in one normal path of nr_add_node(), which forgets to
decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt
leak. It should decrease the refcnt before the function returns like
other normal paths do.
Fix this issue by calling nr_neigh_put() before the nr_add_node()
returns.
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netrom/nr_route.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -208,6 +208,7 @@ static int __must_check nr_add_node(ax25
/* refcount initialized at 1 */
spin_unlock_bh(&nr_node_list_lock);
+ nr_neigh_put(nr_neigh);
return 0;
}
nr_node_lock(nr_node);
From: Lars-Peter Clausen <[email protected]>
commit 8bef455c8b1694547ee59e8b1939205ed9d901a6 upstream.
The XADC has two internal ADCs. Depending on the mode it is operating in
either one or both of them are used. The device manual calls this
continuous (one ADC) and simultaneous (both ADCs) mode.
The meaning of the sequencing register for the aux channels changes
depending on the mode.
In continuous mode each bit corresponds to one of the 16 aux channels. And
the single ADC will convert them one by one in order.
In simultaneous mode the aux channels are split into two groups the first 8
channels are assigned to the first ADC and the other 8 channels to the
second ADC. The upper 8 bits of the sequencing register are unused and the
lower 8 bits control both ADCs. This means a bit needs to be set if either
the corresponding channel from the first group or the second group (or
both) are set.
Currently the driver does not have the special handling required for
simultaneous mode. Add it.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -798,6 +798,16 @@ static int xadc_preenable(struct iio_dev
if (ret)
goto err;
+ /*
+ * In simultaneous mode the upper and lower aux channels are samples at
+ * the same time. In this mode the upper 8 bits in the sequencer
+ * register are don't care and the lower 8 bits control two channels
+ * each. As such we must set the bit if either the channel in the lower
+ * group or the upper group is enabled.
+ */
+ if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
+ scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
+
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
if (ret)
goto err;
From: Doug Berger <[email protected]>
[ Upstream commit a6d0b83f25073bdf08b8547aeff961a62c6ab229 ]
The change to track net_device_stats per ring to better support SMP
missed updating the rx_dropped member.
The ndo_get_stats method is also needed to combine the results for
ethtool statistics (-S) before filling in the ethtool structure.
Fixes: 37a30b435b92 ("net: bcmgenet: Track per TX/RX rings statistics")
Signed-off-by: Doug Berger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -995,6 +995,8 @@ static void bcmgenet_get_ethtool_stats(s
if (netif_running(dev))
bcmgenet_update_mib_counters(priv);
+ dev->netdev_ops->ndo_get_stats(dev);
+
for (i = 0; i < BCMGENET_STATS_LEN; i++) {
const struct bcmgenet_stats *s;
char *p;
@@ -3204,6 +3206,7 @@ static struct net_device_stats *bcmgenet
dev->stats.rx_packets = rx_packets;
dev->stats.rx_errors = rx_errors;
dev->stats.rx_missed_errors = rx_errors;
+ dev->stats.rx_dropped = rx_dropped;
return &dev->stats;
}
From: Takashi Iwai <[email protected]>
commit 67791202c5e069cf2ba51db0718d56c634709e78 upstream.
The commit 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping
spec->init_amp detection") changed the way to assign spec->init_amp
field that specifies the way to initialize the amp. Along with the
change, the commit also replaced a few fixups that set spec->init_amp
in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE. This was rather
aligning to the other fixups, and not supposed to change the actual
behavior.
However, this change turned out to cause a regression on FSC S7020,
which hit exactly the above. The reason was that there is still one
place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE
call, namely in alc_ssid_check().
This patch fixes the regression by adding the proper spec->init_amp
override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED.
Fixes: 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection")
Cc: <[email protected]>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -789,9 +789,11 @@ static void alc_ssid_check(struct hda_co
{
if (!alc_subsystem_id(codec, ports)) {
struct alc_spec *spec = codec->spec;
- codec_dbg(codec,
- "realtek: Enable default setup for auto mode as fallback\n");
- spec->init_amp = ALC_INIT_DEFAULT;
+ if (spec->init_amp == ALC_INIT_UNDEFINED) {
+ codec_dbg(codec,
+ "realtek: Enable default setup for auto mode as fallback\n");
+ spec->init_amp = ALC_INIT_DEFAULT;
+ }
}
}
From: Tonghao Zhang <[email protected]>
[ Upstream commit 27de77cec985233bdf6546437b9761853265c505 ]
syzbot wrote:
| =============================
| WARNING: suspicious RCU usage
| 5.7.0-rc1+ #45 Not tainted
| -----------------------------
| net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!!
|
| other info that might help us debug this:
| rcu_scheduler_active = 2, debug_locks = 1
| ...
|
| stack backtrace:
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
| Workqueue: netns cleanup_net
| Call Trace:
| ...
| ovs_ct_exit
| ovs_exit_net
| ops_exit_list.isra.7
| cleanup_net
| process_one_work
| worker_thread
To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add
lockdep_ovsl_is_held as optional lockdep expression.
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit")
Cc: Pravin B Shelar <[email protected]>
Cc: Yi-Hung Wei <[email protected]>
Reported-by: [email protected]
Signed-off-by: Tonghao Zhang <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/openvswitch/conntrack.c | 3 ++-
net/openvswitch/datapath.c | 4 +++-
2 files changed, 5 insertions(+), 2 deletions(-)
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1890,7 +1890,8 @@ static void ovs_ct_limit_exit(struct net
struct hlist_head *head = &info->limits[i];
struct ovs_ct_limit *ct_limit;
- hlist_for_each_entry_rcu(ct_limit, head, hlist_node)
+ hlist_for_each_entry_rcu(ct_limit, head, hlist_node,
+ lockdep_ovsl_is_held())
kfree_rcu(ct_limit, rcu);
}
kfree(ovs_net->ct_limit_info->limits);
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -2430,8 +2430,10 @@ static void __net_exit ovs_exit_net(stru
struct net *net;
LIST_HEAD(head);
- ovs_ct_exit(dnet);
ovs_lock();
+
+ ovs_ct_exit(dnet);
+
list_for_each_entry_safe(dp, dp_next, &ovs_net->dps, list_node)
__dp_destroy(dp);
From: Takashi Iwai <[email protected]>
commit b392350ec3f229ad9603d3816f753479e441d99a upstream.
As the recent regression showed, we want sometimes to turn off the
audio component binding just for debugging. This patch adds the
module option to control it easily without compilation.
Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -57,6 +57,10 @@ MODULE_PARM_DESC(static_hdmi_pcm, "Don't
#define is_cherryview(codec) ((codec)->core.vendor_id == 0x80862883)
#define is_valleyview_plus(codec) (is_valleyview(codec) || is_cherryview(codec))
+static bool enable_acomp = true;
+module_param(enable_acomp, bool, 0444);
+MODULE_PARM_DESC(enable_acomp, "Enable audio component binding (default=yes)");
+
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
int assigned;
@@ -2550,6 +2554,11 @@ static void generic_acomp_init(struct hd
{
struct hdmi_spec *spec = codec->spec;
+ if (!enable_acomp) {
+ codec_info(codec, "audio component disabled by module option\n");
+ return;
+ }
+
spec->port2pin = port2pin;
setup_drm_audio_ops(codec, ops);
if (!snd_hdac_acomp_init(&codec->bus->core, &spec->drm_audio_ops,
From: Alexander Tsoy <[email protected]>
commit 1c826792586f526a5a5cd21d55aad388f5bb0b23 upstream.
Many Focusrite devices supports a limited set of sample rates per
altsetting. These includes audio interfaces with ADAT ports:
- Scarlett 18i6, 18i8 1st gen, 18i20 1st gen;
- Scarlett 18i8 2nd gen, 18i20 2nd gen;
- Scarlett 18i8 3rd gen, 18i20 3rd gen;
- Clarett 2Pre USB, 4Pre USB, 8Pre USB.
Maximum rate is exposed in the last 4 bytes of Format Type descriptor
which has a non-standard bLength = 10.
Tested-by: Alexey Skobkin <[email protected]>
Signed-off-by: Alexander Tsoy <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/format.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -227,6 +227,52 @@ static int parse_audio_format_rates_v1(s
}
/*
+ * Many Focusrite devices supports a limited set of sampling rates per
+ * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type
+ * descriptor which has a non-standard bLength = 10.
+ */
+static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ unsigned int rate)
+{
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ unsigned char *fmt;
+ unsigned int max_rate;
+
+ iface = usb_ifnum_to_if(chip->dev, fp->iface);
+ if (!iface)
+ return true;
+
+ alts = &iface->altsetting[fp->altset_idx];
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen,
+ NULL, UAC_FORMAT_TYPE);
+ if (!fmt)
+ return true;
+
+ if (fmt[0] == 10) { /* bLength */
+ max_rate = combine_quad(&fmt[6]);
+
+ /* Validate max rate */
+ if (max_rate != 48000 &&
+ max_rate != 96000 &&
+ max_rate != 192000 &&
+ max_rate != 384000) {
+
+ usb_audio_info(chip,
+ "%u:%d : unexpected max rate: %u\n",
+ fp->iface, fp->altsetting, max_rate);
+
+ return true;
+ }
+
+ return rate <= max_rate;
+ }
+
+ return true;
+}
+
+/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
* get to know how many sample rates we have to expect.
@@ -262,6 +308,11 @@ static int parse_uac2_sample_rate_range(
}
for (rate = min; rate <= max; rate += res) {
+ /* Filter out invalid rates on Focusrite devices */
+ if (USB_ID_VENDOR(chip->usb_id) == 0x1235 &&
+ !focusrite_valid_sample_rate(chip, fp, rate))
+ goto skip_rate;
+
if (fp->rate_table)
fp->rate_table[nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
@@ -276,6 +327,7 @@ static int parse_uac2_sample_rate_range(
break;
}
+skip_rate:
/* avoid endless loop */
if (res == 0)
break;
From: Sean Christopherson <[email protected]>
commit 97daa028f3f621adff2c4f7b15fe0874e5b5bd6c upstream.
Return the index of the last valid slot from gfn_to_memslot_approx() if
its binary search loop yielded an out-of-bounds index. The index can
be out-of-bounds if the specified gfn is less than the base of the
lowest memslot (which is also the last valid memslot).
Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is
non-zero.
Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots")
Cc: [email protected] # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots
Cc: [email protected] # 4.19.x
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1932,6 +1932,9 @@ static int gfn_to_memslot_approx(struct
start = slot + 1;
}
+ if (start >= slots->used_slots)
+ return slots->used_slots - 1;
+
if (gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
From: Sean Christopherson <[email protected]>
commit b6467ab142b708dd076f6186ca274f14af379c72 upstream.
Check that the resolved slot (somewhat confusingly named 'start') is a
valid/allocated slot before doing the final comparison to see if the
specified gfn resides in the associated slot. The resolved slot can be
invalid if the binary search loop terminated because the search index
was incremented beyond the number of used slots.
This bug has existed since the binary search algorithm was introduced,
but went unnoticed because KVM statically allocated memory for the max
number of slots, i.e. the access would only be truly out-of-bounds if
all possible slots were allocated and the specified gfn was less than
the base of the lowest memslot. Commit 36947254e5f98 ("KVM: Dynamically
size memslot array based on number of used slots") eliminated the "all
possible slots allocated" condition and made the bug embarrasingly easy
to hit.
Fixes: 9c1a5d38780e6 ("kvm: optimize GFN to memslot lookup with large slots amount")
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1027,7 +1027,7 @@ search_memslots(struct kvm_memslots *slo
start = slot + 1;
}
- if (gfn >= memslots[start].base_gfn &&
+ if (start < slots->used_slots && gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
return &memslots[start];
From: Florian Fainelli <[email protected]>
[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ]
When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:
- all bins are full, we have no space left, and we can either replace an
existing address or return that full condition
- the MAC address was found, then we need to return its bin index and
modify that one, and only that one
- the MAC address was not found and we have a least one bin free, we use
that bin index location then
The code would unfortunately fail on all counts.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 30 ++++++++++++++++++++++++++----
drivers/net/dsa/b53/b53_regs.h | 3 +++
2 files changed, 29 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1450,6 +1450,7 @@ static int b53_arl_read(struct b53_devic
u16 vid, struct b53_arl_entry *ent, u8 *idx,
bool is_valid)
{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
unsigned int i;
int ret;
@@ -1457,6 +1458,8 @@ static int b53_arl_read(struct b53_devic
if (ret)
return ret;
+ bitmap_zero(free_bins, dev->num_arl_entries);
+
/* Read the bins */
for (i = 0; i < dev->num_arl_entries; i++) {
u64 mac_vid;
@@ -1468,16 +1471,24 @@ static int b53_arl_read(struct b53_devic
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
- if (!(fwd_entry & ARLTBL_VALID))
+ if (!(fwd_entry & ARLTBL_VALID)) {
+ set_bit(i, free_bins);
continue;
+ }
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
if (dev->vlan_enabled &&
((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
continue;
*idx = i;
+ return 0;
}
+ if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+ return -ENOSPC;
+
+ *idx = find_first_bit(free_bins, dev->num_arl_entries);
+
return -ENOENT;
}
@@ -1507,10 +1518,21 @@ static int b53_arl_op(struct b53_device
if (op)
return ret;
- /* We could not find a matching MAC, so reset to a new entry */
- if (ret) {
+ switch (ret) {
+ case -ENOSPC:
+ dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+ addr, vid);
+ return is_valid ? ret : 0;
+ case -ENOENT:
+ /* We could not find a matching MAC, so reset to a new entry */
+ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+ addr, vid, idx);
fwd_entry = 0;
- idx = 1;
+ break;
+ default:
+ dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+ addr, vid, idx);
+ break;
}
memset(&ent, 0, sizeof(ent));
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -323,6 +323,9 @@
#define ARLTBL_STATIC BIT(15)
#define ARLTBL_VALID BIT(16)
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES 4
+
/* ARL Search Control Register (8 bit) */
#define B53_ARL_SRCH_CTL 0x50
#define B53_ARL_SRCH_CTL_25 0x20
From: Florian Fainelli <[email protected]>
[ Upstream commit 64fec9493f7dc9bdd7233bcfe98985c45bd0e3c1 ]
Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status,
the default is to perform Shared VLAN learning instead of Individual
learning.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 4 ++++
drivers/net/dsa/b53/b53_regs.h | 1 +
2 files changed, 5 insertions(+)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1441,6 +1441,10 @@ static int b53_arl_rw_op(struct b53_devi
reg |= ARLTBL_RW;
else
reg &= ~ARLTBL_RW;
+ if (dev->vlan_enabled)
+ reg &= ~ARLTBL_IVL_SVL_SELECT;
+ else
+ reg |= ARLTBL_IVL_SVL_SELECT;
b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
return b53_arl_op_wait(dev);
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -292,6 +292,7 @@
/* ARL Table Read/Write Register (8 bit) */
#define B53_ARLTBL_RW_CTRL 0x00
#define ARLTBL_RW BIT(0)
+#define ARLTBL_IVL_SVL_SELECT BIT(6)
#define ARLTBL_START_DONE BIT(7)
/* MAC Address Index Register (48 bit) */
From: Uros Bizjak <[email protected]>
commit fb56baae5ea509e63c2a068d66a4d8ea91969fca upstream.
There is no reason to limit the use of do_machine_check
to 64bit targets. MCE handling works for both target familes.
Cc: Paolo Bonzini <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: [email protected]
Fixes: a0861c02a981 ("KVM: Add VT-x machine check support")
Signed-off-by: Uros Bizjak <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4566,7 +4566,7 @@ static int handle_rmode_exception(struct
*/
static void kvm_machine_check(void)
{
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
struct pt_regs regs = {
.cs = 3, /* Fake ring 3 no matter what the guest ran on */
.flags = X86_EFLAGS_IF,
From: Sabrina Dubroca <[email protected]>
[ Upstream commit 9a7b5b50de8a764671ba1800fe4c52d3b7013901 ]
IFLA_GENEVE_* attributes are in the data array, which is correctly
used when fetching the value, but not when setting the extended
ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds
array accesses, but we don't provide a pointer to the invalid
attribute to userspace.
Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/geneve.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -1207,7 +1207,7 @@ static int geneve_validate(struct nlattr
enum ifla_geneve_df df = nla_get_u8(data[IFLA_GENEVE_DF]);
if (df < 0 || df > GENEVE_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_GENEVE_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_GENEVE_DF],
"Invalid DF attribute");
return -EINVAL;
}
From: David Ahern <[email protected]>
[ Upstream commit 0c922a4850eba2e668f73a3f1153196e09abb251 ]
IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by
xfrm code to tell other skb handlers that the packet has been passed
through the xfrm output functions. Simplify the code and just always
set them rather than conditionally based on netfilter enabled thus
making the flag available for other users.
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/xfrm4_output.c | 2 --
net/ipv6/xfrm6_output.c | 2 --
2 files changed, 4 deletions(-)
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -58,9 +58,7 @@ int xfrm4_output_finish(struct sock *sk,
{
memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
-#ifdef CONFIG_NETFILTER
IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -111,9 +111,7 @@ int xfrm6_output_finish(struct sock *sk,
{
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
-#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
From: George Wilson <[email protected]>
commit eba5cf3dcb844c82f54d4a857e124824e252206d upstream.
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume
with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The
"partner partition suspended" transport event disables the associated CRQ
such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed
until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.'
This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from
ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and
retries the ibmvtpm_send_crq() once.
Cc: [email protected] # 3.7.x
Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Reported-by: Linh Pham <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
Signed-off-by: George Wilson <[email protected]>
Tested-by: Linh Pham <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_ibmvtpm.c | 136 ++++++++++++++++++++++-------------------
1 file changed, 73 insertions(+), 63 deletions(-)
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2012 IBM Corporation
+ * Copyright (C) 2012-2020 IBM Corporation
*
* Author: Ashley Lai <[email protected]>
*
@@ -134,6 +134,64 @@ static int tpm_ibmvtpm_recv(struct tpm_c
}
/**
+ * ibmvtpm_crq_send_init - Send a CRQ initialize message
+ * @ibmvtpm: vtpm device struct
+ *
+ * Return:
+ * 0 on success.
+ * Non-zero on failure.
+ */
+static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
+{
+ int rc;
+
+ rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
+ if (rc != H_SUCCESS)
+ dev_err(ibmvtpm->dev,
+ "%s failed rc=%d\n", __func__, rc);
+
+ return rc;
+}
+
+/**
+ * tpm_ibmvtpm_resume - Resume from suspend
+ *
+ * @dev: device struct
+ *
+ * Return: Always 0.
+ */
+static int tpm_ibmvtpm_resume(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ int rc = 0;
+
+ do {
+ if (rc)
+ msleep(100);
+ rc = plpar_hcall_norets(H_ENABLE_CRQ,
+ ibmvtpm->vdev->unit_address);
+ } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
+
+ if (rc) {
+ dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = vio_enable_interrupts(ibmvtpm->vdev);
+ if (rc) {
+ dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = ibmvtpm_crq_send_init(ibmvtpm);
+ if (rc)
+ dev_err(dev, "Error send_init rc=%d\n", rc);
+
+ return rc;
+}
+
+/**
* tpm_ibmvtpm_send() - Send a TPM command
* @chip: tpm chip struct
* @buf: buffer contains data to send
@@ -146,6 +204,7 @@ static int tpm_ibmvtpm_recv(struct tpm_c
static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ bool retry = true;
int rc, sig;
if (!ibmvtpm->rtce_buf) {
@@ -179,18 +238,27 @@ static int tpm_ibmvtpm_send(struct tpm_c
*/
ibmvtpm->tpm_processing_cmd = true;
+again:
rc = ibmvtpm_send_crq(ibmvtpm->vdev,
IBMVTPM_VALID_CMD, VTPM_TPM_COMMAND,
count, ibmvtpm->rtce_dma_handle);
if (rc != H_SUCCESS) {
+ /*
+ * H_CLOSED can be returned after LPM resume. Call
+ * tpm_ibmvtpm_resume() to re-enable the CRQ then retry
+ * ibmvtpm_send_crq() once before failing.
+ */
+ if (rc == H_CLOSED && retry) {
+ tpm_ibmvtpm_resume(ibmvtpm->dev);
+ retry = false;
+ goto again;
+ }
dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
- rc = 0;
ibmvtpm->tpm_processing_cmd = false;
- } else
- rc = 0;
+ }
spin_unlock(&ibmvtpm->rtce_lock);
- return rc;
+ return 0;
}
static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
@@ -269,26 +337,6 @@ static int ibmvtpm_crq_send_init_complet
}
/**
- * ibmvtpm_crq_send_init - Send a CRQ initialize message
- * @ibmvtpm: vtpm device struct
- *
- * Return:
- * 0 on success.
- * Non-zero on failure.
- */
-static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
-{
- int rc;
-
- rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
- if (rc != H_SUCCESS)
- dev_err(ibmvtpm->dev,
- "ibmvtpm_crq_send_init failed rc=%d\n", rc);
-
- return rc;
-}
-
-/**
* tpm_ibmvtpm_remove - ibm vtpm remove entry point
* @vdev: vio device struct
*
@@ -400,44 +448,6 @@ static int ibmvtpm_reset_crq(struct ibmv
ibmvtpm->crq_dma_handle, CRQ_RES_BUF_SIZE);
}
-/**
- * tpm_ibmvtpm_resume - Resume from suspend
- *
- * @dev: device struct
- *
- * Return: Always 0.
- */
-static int tpm_ibmvtpm_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
- int rc = 0;
-
- do {
- if (rc)
- msleep(100);
- rc = plpar_hcall_norets(H_ENABLE_CRQ,
- ibmvtpm->vdev->unit_address);
- } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
-
- if (rc) {
- dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
- return rc;
- }
-
- rc = vio_enable_interrupts(ibmvtpm->vdev);
- if (rc) {
- dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
- return rc;
- }
-
- rc = ibmvtpm_crq_send_init(ibmvtpm);
- if (rc)
- dev_err(dev, "Error send_init rc=%d\n", rc);
-
- return rc;
-}
-
static bool tpm_ibmvtpm_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == 0);
From: Chuck Lever <[email protected]>
commit 6221f1d9b63fed6260273e59a2b89ab30537a811 upstream.
Currently, after the forward channel connection goes away,
backchannel operations are causing soft lockups on the server
because call_transmit_status's SOFTCONN logic ignores ENOTCONN.
Such backchannel Calls are aggressively retried until the client
reconnects.
Backchannel Calls should use RPC_TASK_NOCONNECT rather than
RPC_TASK_SOFTCONN. If there is no forward connection, the server is
not capable of establishing a connection back to the client, thus
that backchannel request should fail before the server attempts to
send it. Commit 58255a4e3ce5 ("NFSD: NFSv4 callback client should
use RPC_TASK_SOFTCONN") was merged several years before
RPC_TASK_NOCONNECT was available.
Because setup_callback_client() explicitly sets NOPING, the NFSv4.0
callback connection depends on the first callback RPC to initiate
a connection to the client. Thus NFSv4.0 needs to continue to use
RPC_TASK_SOFTCONN.
Suggested-by: Trond Myklebust <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Cc: <[email protected]> # v4.20+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4callback.c | 4 +++-
net/sunrpc/svc_xprt.c | 2 ++
net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 2 ++
net/sunrpc/xprtsock.c | 1 +
4 files changed, 8 insertions(+), 1 deletion(-)
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -1241,6 +1241,7 @@ nfsd4_run_cb_work(struct work_struct *wo
container_of(work, struct nfsd4_callback, cb_work);
struct nfs4_client *clp = cb->cb_clp;
struct rpc_clnt *clnt;
+ int flags;
if (cb->cb_need_restart) {
cb->cb_need_restart = false;
@@ -1269,7 +1270,8 @@ nfsd4_run_cb_work(struct work_struct *wo
}
cb->cb_msg.rpc_cred = clp->cl_cb_cred;
- rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | RPC_TASK_SOFTCONN,
+ flags = clp->cl_minorversion ? RPC_TASK_NOCONNECT : RPC_TASK_SOFTCONN;
+ rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | flags,
cb->cb_ops ? &nfsd4_cb_ops : &nfsd4_cb_probe_ops, cb);
}
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -1028,6 +1028,8 @@ static void svc_delete_xprt(struct svc_x
dprintk("svc: svc_delete_xprt(%p)\n", xprt);
xprt->xpt_ops->xpo_detach(xprt);
+ if (xprt->xpt_bc_xprt)
+ xprt->xpt_bc_xprt->ops->close(xprt->xpt_bc_xprt);
spin_lock_bh(&serv->sv_lock);
list_del_init(&xprt->xpt_list);
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -242,6 +242,8 @@ static void
xprt_rdma_bc_close(struct rpc_xprt *xprt)
{
dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
+
+ xprt_disconnect_done(xprt);
xprt->cwnd = RPC_CWNDSHIFT;
}
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2714,6 +2714,7 @@ static int bc_send_request(struct rpc_rq
static void bc_close(struct rpc_xprt *xprt)
{
+ xprt_disconnect_done(xprt);
}
/*
From: Johannes Berg <[email protected]>
commit b98b33d5560a2d940f3b80f6768a6177bf3dfbc0 upstream.
The iwl_trans_pcie_dyn_txq_free() function only releases the frames
that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(),
but doesn't actually free the DMA ring or byte-count tables for the
queue. This leads to pretty large memory leaks (at least before my
queue size improvements), in particular in monitor/sniffer mode on
channel hopping since this happens on every channel change.
This was also now more evident after the move to a DMA pool for the
byte count tables, showing messages such as
BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown()
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management")
Cc: [email protected] # v4.14+
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
@@ -1283,6 +1283,9 @@ void iwl_trans_pcie_dyn_txq_free(struct
iwl_pcie_gen2_txq_unmap(trans, queue);
+ iwl_pcie_gen2_txq_free_memory(trans, trans_pcie->txq[queue]);
+ trans_pcie->txq[queue] = NULL;
+
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", queue);
}
From: Jonathan Cox <[email protected]>
commit be34a5854b4606bd7a160ad3cb43415d623596c7 upstream.
The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and
USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not
respond on boot, just like other Corsair keyboards
Signed-off-by: Jonathan Cox <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -430,6 +430,10 @@ static const struct usb_device_id usb_qu
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Corsair K70 RGB RAPDIFIRE */
+ { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_DELAY_CTRL_MSG },
+
/* MIDI keyboard WORLDE MINI */
{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
From: Johannes Berg <[email protected]>
commit e6d419f943318e2b903e380dfd52a8dda6db3021 upstream.
The function iwl_mvm_remove_inactive_tids() returns bool, so we
should just check "if (ret)", not "if (ret >= 0)" (which would
do nothing useful here). We obviously therefore cannot use the
return value of the function for the free_queue, we need to use
the queue (i) we're currently dealing with instead.
Cc: [email protected] # v5.4+
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.9d862ed72535.I9e27ccc3ee3c8855fc13682592b571581925dfbd@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -1169,9 +1169,9 @@ static int iwl_mvm_inactivity_check(stru
inactive_tid_bitmap,
&unshare_queues,
&changetid_queues);
- if (ret >= 0 && free_queue < 0) {
+ if (ret && free_queue < 0) {
queue_owner = sta;
- free_queue = ret;
+ free_queue = i;
}
/* only unlock sta lock - we still need the queue info lock */
spin_unlock_bh(&mvmsta->lock);
From: Lars Engebretsen <[email protected]>
commit a07479147be03d2450376ebaff9ea1a0682f25d6 upstream.
This change removes the semi-colon from the devm_iio_device_register()
macro which seems to have been added by accident.
Fixes: 63b19547cc3d9 ("iio: Use macro magic to avoid manual assign of driver_module")
Signed-off-by: Lars Engebretsen <[email protected]>
Cc: <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/iio/iio.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -596,7 +596,7 @@ void iio_device_unregister(struct iio_de
* 0 on success, negative error number on failure.
*/
#define devm_iio_device_register(dev, indio_dev) \
- __devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
+ __devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
From: Eric Dumazet <[email protected]>
[ Upstream commit 310660a14b74c380b0ef5c12b66933d6a3d1b59f ]
Commit 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support")
brought another indirect call in fast path.
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Tariq Toukan <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -43,6 +43,7 @@
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/moduleparam.h>
+#include <linux/indirect_call_wrapper.h>
#include "mlx4_en.h"
@@ -261,6 +262,10 @@ static void mlx4_en_stamp_wqe(struct mlx
}
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
@@ -329,6 +334,11 @@ u32 mlx4_en_free_tx_desc(struct mlx4_en_
return tx_info->nr_txbb;
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
+
u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
int index, u64 timestamp,
@@ -449,7 +459,9 @@ bool mlx4_en_process_tx_cq(struct net_de
timestamp = mlx4_en_get_cqe_ts(cqe);
/* free next descriptor */
- last_nr_txbb = ring->free_tx_desc(
+ last_nr_txbb = INDIRECT_CALL_2(ring->free_tx_desc,
+ mlx4_en_free_tx_desc,
+ mlx4_en_recycle_tx_desc,
priv, ring, ring_index,
timestamp, napi_budget);
From: Olivier Moysan <[email protected]>
commit e2042d2936dfc84e9c600fe9b9d0039ca0e54b7d upstream.
This commit fixes the following error:
"BUG: sleeping function called from invalid context at kernel/irq/chip.c"
In DMA mode suppress the trigger irq handler, and make the buffer
transfers directly in DMA callback, instead.
Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Olivier Moysan <[email protected]>
Acked-by: Fabrice Gasnier <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 31 ++++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1367,8 +1367,30 @@ static unsigned int stm32_adc_dma_residu
static void stm32_adc_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ int residue = stm32_adc_dma_residue(adc);
+
+ /*
+ * In DMA mode the trigger services of IIO are not used
+ * (e.g. no call to iio_trigger_poll).
+ * Calling irq handler associated to the hardware trigger is not
+ * relevant as the conversions have already been done. Data
+ * transfers are performed directly in DMA callback instead.
+ * This implementation avoids to call trigger irq handler that
+ * may sleep, in an atomic context (DMA irq handler context).
+ */
+ dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
+
+ while (residue >= indio_dev->scan_bytes) {
+ u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
- iio_trigger_poll_chained(indio_dev->trig);
+ iio_push_to_buffers(indio_dev, buffer);
+
+ residue -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->rx_buf_sz)
+ adc->bufi = 0;
+ }
}
static int stm32_adc_dma_start(struct iio_dev *indio_dev)
@@ -1778,6 +1800,7 @@ static int stm32_adc_probe(struct platfo
{
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
+ irqreturn_t (*handler)(int irq, void *p) = NULL;
struct stm32_adc *adc;
int ret;
@@ -1843,9 +1866,11 @@ static int stm32_adc_probe(struct platfo
if (ret < 0)
return ret;
+ if (!adc->dma_chan)
+ handler = &stm32_adc_trigger_handler;
+
ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- &stm32_adc_trigger_handler,
+ &iio_pollfunc_store_time, handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");
From: Alan Stern <[email protected]>
commit 056ad39ee9253873522f6469c3364964a322912b upstream.
FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug
in the USB scatter-gather library:
BUG: KASAN: use-after-free in atomic_read
include/asm-generic/atomic-instrumented.h:26 [inline]
BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170
drivers/usb/core/hcd.c:1607
Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27
CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Workqueue: scsi_tmf_2 scmd_eh_abort_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x153/0x1cb mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192
__kasan_check_read+0x11/0x20 mm/kasan/common.c:95
atomic_read include/asm-generic/atomic-instrumented.h:26 [inline]
usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607
usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657
usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602
usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937
This bug occurs when cancellation of the S-G transfer races with
transfer completion. When that happens, usb_sg_cancel() may continue
to access the transfer's URBs after usb_sg_wait() has freed them.
The bug is caused by the fact that usb_sg_cancel() does not take any
sort of reference to the transfer, and so there is nothing to prevent
the URBs from being deallocated while the routine is trying to use
them. The fix is to take such a reference by incrementing the
transfer's io->count field while the cancellation is in progres and
decrementing it afterward. The transfer's URBs are not deallocated
until io->complete is triggered, which happens when io->count reaches
zero.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: Kyungtae Kim <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/message.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -588,12 +588,13 @@ void usb_sg_cancel(struct usb_sg_request
int i, retval;
spin_lock_irqsave(&io->lock, flags);
- if (io->status) {
+ if (io->status || io->count == 0) {
spin_unlock_irqrestore(&io->lock, flags);
return;
}
/* shut everything down */
io->status = -ECONNRESET;
+ io->count++; /* Keep the request alive until we're done */
spin_unlock_irqrestore(&io->lock, flags);
for (i = io->entries - 1; i >= 0; --i) {
@@ -607,6 +608,12 @@ void usb_sg_cancel(struct usb_sg_request
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
+
+ spin_lock_irqsave(&io->lock, flags);
+ io->count--;
+ if (!io->count)
+ complete(&io->complete);
+ spin_unlock_irqrestore(&io->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_sg_cancel);
From: Alan Stern <[email protected]>
commit 9f952e26295d977dbfc6fedeaf8c4f112c818d37 upstream.
Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event
during reset-resume") wasn't very well conceived. The problem it
tried to fix was that if a connect-change event occurred while the
system was asleep (such as a device disconnecting itself from the bus
when it is suspended and then reconnecting when it resumes)
requiring a reset-resume during the system wakeup transition, the hub
port's change_bit entry would remain set afterward. This would cause
the hub driver to believe another connect-change event had occurred
after the reset-resume, which was wrong and would lead the driver to
send unnecessary requests to the device (which could interfere with a
firmware update).
The commit tried to fix this by not setting the change_bit during the
wakeup. But this was the wrong thing to do; it means that when a
device is unplugged while the system is asleep, the hub driver doesn't
realize anything has happened: The change_bit flag which would tell it
to handle the disconnect event is clear.
The commit needs to be reverted and the problem fixed in a different
way. Fortunately an alternative solution was noted in the commit's
Changelog: We can continue to set the change_bit entry in
hub_activate() but then clear it when a reset-resume occurs. That way
the the hub driver will see the change_bit when a device is
disconnected but won't see it when the device is still present.
That's what this patch does.
Reported-and-tested-by: Peter Chen <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume")
Tested-by: Paul Zimmerman <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1222,6 +1222,11 @@ static void hub_activate(struct usb_hub
#ifdef CONFIG_PM
udev->reset_resume = 1;
#endif
+ /* Don't set the change_bits when the device
+ * was powered off.
+ */
+ if (test_bit(port1, hub->power_bits))
+ set_bit(port1, hub->change_bits);
} else {
/* The power session is gone; tell hub_wq */
@@ -3087,6 +3092,15 @@ static int check_port_resume_type(struct
if (portchange & USB_PORT_STAT_C_ENABLE)
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
+
+ /*
+ * Whatever made this reset-resume necessary may have
+ * turned on the port1 bit in hub->change_bits. But after
+ * a successful reset-resume we want the bit to be clear;
+ * if it was on it would indicate that something happened
+ * following the reset-resume.
+ */
+ clear_bit(port1, hub->change_bits);
}
return status;
From: Amit Singh Tomar <[email protected]>
commit abf42d2f333b21bf8d33b2fbb8a85fa62037ac01 upstream.
commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit")
breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the
fact that generic clk routine clk_disable_unused() disables the gate clks,
and that in turns disables OWL UART (but UART driver never enables it). To
prove this theory, Andre suggested to use "clk_ignore_unused" in kernel
commnd line and it worked (Kernel happily lands into RAMFS world :)).
This commit fix this up by adding clk_prepare_enable().
Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit")
Signed-off-by: Amit Singh Tomar <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/owl-uart.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -680,6 +680,12 @@ static int owl_uart_probe(struct platfor
return PTR_ERR(owl_port->clk);
}
+ ret = clk_prepare_enable(owl_port->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not enable clk\n");
+ return ret;
+ }
+
owl_port->port.dev = &pdev->dev;
owl_port->port.line = pdev->id;
owl_port->port.type = PORT_OWL;
@@ -712,6 +718,7 @@ static int owl_uart_remove(struct platfo
uart_remove_one_port(&owl_uart_driver, &owl_port->port);
owl_uart_ports[pdev->id] = NULL;
+ clk_disable_unprepare(owl_port->clk);
return 0;
}
From: Alexandre Belloni <[email protected]>
commit dd7de4c0023e7564cabe39d64b2822a522890792 upstream.
The first received byte is the MSB, followed by the LSB so the value needs
to be byte swapped.
Also, the ADC actually has a delay of one clock on the SPI bus. Read three
bytes to get the last bit.
Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips")
Signed-off-by: Alexandre Belloni <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ti-ads8344.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/adc/ti-ads8344.c
+++ b/drivers/iio/adc/ti-ads8344.c
@@ -29,7 +29,7 @@ struct ads8344 {
struct mutex lock;
u8 tx_buf ____cacheline_aligned;
- u16 rx_buf;
+ u8 rx_buf[3];
};
#define ADS8344_VOLTAGE_CHANNEL(chan, si) \
@@ -89,11 +89,11 @@ static int ads8344_adc_conversion(struct
udelay(9);
- ret = spi_read(spi, &adc->rx_buf, 2);
+ ret = spi_read(spi, adc->rx_buf, sizeof(adc->rx_buf));
if (ret)
return ret;
- return adc->rx_buf;
+ return adc->rx_buf[0] << 9 | adc->rx_buf[1] << 1 | adc->rx_buf[2] >> 7;
}
static int ads8344_read_raw(struct iio_dev *iio,
From: Thinh Nguyen <[email protected]>
commit 49e0590e3a60e75b493e5df879e216e5073c7663 upstream.
A request may not be completed because not all the TRBs are prepared for
it. This happens when we run out of available TRBs. When some TRBs are
completed, the driver needs to prepare the rest of the TRBs for the
request. The check dwc3_gadget_ep_request_completed() shouldn't be
checking the amount of data received but rather the number of pending
TRBs. Revise this request completion check.
Cc: [email protected]
Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling")
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2481,14 +2481,7 @@ static int dwc3_gadget_ep_reclaim_trb_li
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
- /*
- * For OUT direction, host may send less than the setup
- * length. Return true for all OUT requests.
- */
- if (!req->direction)
- return true;
-
- return req->request.actual == req->request.length;
+ return req->num_pending_sgs == 0;
}
static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
@@ -2512,8 +2505,7 @@ static int dwc3_gadget_ep_cleanup_comple
req->request.actual = req->request.length - req->remaining;
- if (!dwc3_gadget_ep_request_completed(req) ||
- req->num_pending_sgs) {
+ if (!dwc3_gadget_ep_request_completed(req)) {
__dwc3_gadget_kick_transfer(dep);
goto out;
}
From: Jann Horn <[email protected]>
commit bdebd6a2831b6fab69eb85cee74a8ba77f1a1cc2 upstream.
remap_vmalloc_range() has had various issues with the bounds checks it
promises to perform ("This function checks that addr is a valid
vmalloc'ed area, and that it is big enough to cover the vma") over time,
e.g.:
- not detecting pgoff<<PAGE_SHIFT overflow
- not detecting (pgoff<<PAGE_SHIFT)+usize overflow
- not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same
vmalloc allocation
- comparing a potentially wildly out-of-bounds pointer with the end of
the vmalloc region
In particular, since commit fc9702273e2e ("bpf: Add mmap() support for
BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer
dereferences by calling mmap() on a BPF map with a size that is bigger
than the distance from the start of the BPF map to the end of the
address space.
This could theoretically be used as a kernel ASLR bypass, by using
whether mmap() with a given offset oopses or returns an error code to
perform a binary search over the possible address range.
To allow remap_vmalloc_range_partial() to verify that addr and
addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset
to remap_vmalloc_range_partial() instead of adding it to the pointer in
remap_vmalloc_range().
In remap_vmalloc_range_partial(), fix the check against
get_vm_area_size() by using size comparisons instead of pointer
comparisons, and add checks for pgoff.
Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: [email protected]
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/vmcore.c | 5 +++--
include/linux/vmalloc.h | 2 +-
mm/vmalloc.c | 16 +++++++++++++---
samples/vfio-mdev/mdpy.c | 2 +-
4 files changed, 18 insertions(+), 7 deletions(-)
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -266,7 +266,8 @@ static int vmcoredd_mmap_dumps(struct vm
if (start < offset + dump->size) {
tsz = min(offset + (u64)dump->size - start, (u64)size);
buf = dump->buf + start - offset;
- if (remap_vmalloc_range_partial(vma, dst, buf, tsz)) {
+ if (remap_vmalloc_range_partial(vma, dst, buf, 0,
+ tsz)) {
ret = -EFAULT;
goto out_unlock;
}
@@ -624,7 +625,7 @@ static int mmap_vmcore(struct file *file
tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)start, size);
kaddr = elfnotes_buf + start - elfcorebuf_sz - vmcoredd_orig_sz;
if (remap_vmalloc_range_partial(vma, vma->vm_start + len,
- kaddr, tsz))
+ kaddr, 0, tsz))
goto fail;
size -= tsz;
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -122,7 +122,7 @@ extern void vunmap(const void *addr);
extern int remap_vmalloc_range_partial(struct vm_area_struct *vma,
unsigned long uaddr, void *kaddr,
- unsigned long size);
+ unsigned long pgoff, unsigned long size);
extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
unsigned long pgoff);
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -34,6 +34,7 @@
#include <linux/llist.h>
#include <linux/bitops.h>
#include <linux/rbtree_augmented.h>
+#include <linux/overflow.h>
#include <linux/uaccess.h>
#include <asm/tlbflush.h>
@@ -2976,6 +2977,7 @@ finished:
* @vma: vma to cover
* @uaddr: target user address to start at
* @kaddr: virtual address of vmalloc kernel memory
+ * @pgoff: offset from @kaddr to start at
* @size: size of map area
*
* Returns: 0 for success, -Exxx on failure
@@ -2988,9 +2990,15 @@ finished:
* Similar to remap_pfn_range() (see mm/memory.c)
*/
int remap_vmalloc_range_partial(struct vm_area_struct *vma, unsigned long uaddr,
- void *kaddr, unsigned long size)
+ void *kaddr, unsigned long pgoff,
+ unsigned long size)
{
struct vm_struct *area;
+ unsigned long off;
+ unsigned long end_index;
+
+ if (check_shl_overflow(pgoff, PAGE_SHIFT, &off))
+ return -EINVAL;
size = PAGE_ALIGN(size);
@@ -3004,8 +3012,10 @@ int remap_vmalloc_range_partial(struct v
if (!(area->flags & (VM_USERMAP | VM_DMA_COHERENT)))
return -EINVAL;
- if (kaddr + size > area->addr + get_vm_area_size(area))
+ if (check_add_overflow(size, off, &end_index) ||
+ end_index > get_vm_area_size(area))
return -EINVAL;
+ kaddr += off;
do {
struct page *page = vmalloc_to_page(kaddr);
@@ -3044,7 +3054,7 @@ int remap_vmalloc_range(struct vm_area_s
unsigned long pgoff)
{
return remap_vmalloc_range_partial(vma, vma->vm_start,
- addr + (pgoff << PAGE_SHIFT),
+ addr, pgoff,
vma->vm_end - vma->vm_start);
}
EXPORT_SYMBOL(remap_vmalloc_range);
--- a/samples/vfio-mdev/mdpy.c
+++ b/samples/vfio-mdev/mdpy.c
@@ -418,7 +418,7 @@ static int mdpy_mmap(struct mdev_device
return -EINVAL;
return remap_vmalloc_range_partial(vma, vma->vm_start,
- mdev_state->memblk,
+ mdev_state->memblk, 0,
vma->vm_end - vma->vm_start);
}
From: Naoki Kiryu <[email protected]>
commit 0df9433fcae02215c8fd79690c134d535c7bb905 upstream.
Before this commit, typec_altmode_get_partner would return a
const struct typec_altmode * pointing to address 0x08 when
to_altmode(adev)->partner was NULL.
Add a check for to_altmode(adev)->partner being NULL to fix this.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1785972
Fixes: 5f54a85db5df ("usb: typec: Make sure an alt mode exist before getting its partner")
Cc: [email protected]
Signed-off-by: Naoki Kiryu <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/bus.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -192,7 +192,10 @@ EXPORT_SYMBOL_GPL(typec_altmode_vdm);
const struct typec_altmode *
typec_altmode_get_partner(struct typec_altmode *adev)
{
- return adev ? &to_altmode(adev)->partner->adev : NULL;
+ if (!adev || !to_altmode(adev)->partner)
+ return NULL;
+
+ return &to_altmode(adev)->partner->adev;
}
EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
From: Nicolas Pitre <[email protected]>
commit 9a98e7a80f95378c9ee0c644705e3b5aa54745f1 upstream.
Even if the actual screen size is bounded in vc_do_resize(), the unicode
buffer is still a little more than twice the size of the glyph buffer
and may exceed MAX_ORDER down the kmalloc() path. This can be triggered
from user space.
Since there is no point having a physically contiguous buffer here,
let's avoid the above issue as well as reducing pressure on high order
allocations by using vmalloc() instead.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -81,6 +81,7 @@
#include <linux/errno.h>
#include <linux/kd.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/console.h>
@@ -350,7 +351,7 @@ static struct uni_screen *vc_uniscr_allo
/* allocate everything in one go */
memsize = cols * rows * sizeof(char32_t);
memsize += rows * sizeof(char32_t *);
- p = kmalloc(memsize, GFP_KERNEL);
+ p = vmalloc(memsize);
if (!p)
return NULL;
@@ -366,7 +367,7 @@ static struct uni_screen *vc_uniscr_allo
static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
{
- kfree(vc->vc_uni_screen);
+ vfree(vc->vc_uni_screen);
vc->vc_uni_screen = new_uniscr;
}
From: Takashi Iwai <[email protected]>
commit 7686e3485253635c529cdd5f416fc640abaf076f upstream.
The error handling code in usX2Y_rate_set() may hit a potential NULL
dereference when an error occurs before allocating all us->urb[].
Add a proper NULL check for fixing the corner case.
Reported-by: Lin Yi <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/usx2y/usbusx2yaudio.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -681,6 +681,8 @@ static int usX2Y_rate_set(struct usX2Yde
us->submitted = 2*NOOF_SETRATE_URBS;
for (i = 0; i < NOOF_SETRATE_URBS; ++i) {
struct urb *urb = us->urb[i];
+ if (!urb)
+ continue;
if (urb->status) {
if (!err)
err = -ENODEV;
From: Lars-Peter Clausen <[email protected]>
commit f954b098fbac4d183219ce5b42d76d6df2aed50a upstream.
When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt
the EOS interrupt should be cleared from the status register. Otherwise it
is possible that it was still set from a previous capture. If that is the
case the interrupt would fire immediately even though no conversion has
been done yet and stale data is being read from the device.
The old code only clears the interrupt if the interrupt was previously
unmasked. Which does not make much sense since the interrupt is always
masked at this point and in addition masking the interrupt does not clear
the interrupt from the status register. So the clearing needs to be done
unconditionally.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -674,7 +674,7 @@ static int xadc_trigger_set_state(struct
spin_lock_irqsave(&xadc->lock, flags);
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
- xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
if (state)
val |= XADC_AXI_INT_EOS;
else
From: Ilan Peer <[email protected]>
commit 38af8d5a90a8c3b41ff0484855e24bd55b43ce9d upstream.
As this was not supposed to be enabled to begin with.
Cc: [email protected] # v4.19+
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.53dbc3c6c36b.Idfe118546b92cc31548b2211472a5303c7de5909@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
@@ -525,8 +525,7 @@ static struct ieee80211_sband_iftype_dat
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
@@ -610,8 +609,7 @@ static struct ieee80211_sband_iftype_dat
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_BSR,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
From: Xiyu Yang <[email protected]>
commit 59e1947ca09ebd1cae147c08c7c41f3141233c84 upstream.
snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".
When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.
Fix this issue by jumping to "end" label when those error scenarios
occur.
Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer_quirks.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1508,11 +1508,15 @@ static int snd_microii_spdif_default_get
/* use known values for that card: interface#1 altsetting#1 */
iface = usb_ifnum_to_if(chip->dev, 1);
- if (!iface || iface->num_altsetting < 2)
- return -EINVAL;
+ if (!iface || iface->num_altsetting < 2) {
+ err = -EINVAL;
+ goto end;
+ }
alts = &iface->altsetting[1];
- if (get_iface_desc(alts)->bNumEndpoints < 1)
- return -EINVAL;
+ if (get_iface_desc(alts)->bNumEndpoints < 1) {
+ err = -EINVAL;
+ goto end;
+ }
ep = get_endpoint(alts, 0)->bEndpointAddress;
err = snd_usb_ctl_msg(chip->dev,
From: Michal Simek <[email protected]>
commit 8da1a3940da4b0e82848ec29b835486890bc9232 upstream.
This reverts commit ab262666018de6f4e206b021386b93ed0c164316.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -30,13 +30,13 @@
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
#define TX_TIMEOUT 500000
/* Rx Trigger level */
static int rx_trigger_level = 56;
-static int uartps_major;
module_param(rx_trigger_level, uint, 0444);
MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
@@ -1521,7 +1521,7 @@ static int cdns_uart_probe(struct platfo
cdns_uart_uart_driver->owner = THIS_MODULE;
cdns_uart_uart_driver->driver_name = driver_name;
cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = uartps_major;
+ cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
cdns_uart_uart_driver->minor = cdns_uart_data->id;
cdns_uart_uart_driver->nr = 1;
@@ -1550,7 +1550,6 @@ static int cdns_uart_probe(struct platfo
goto err_out_id;
}
- uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
/*
From: Michal Simek <[email protected]>
commit 91c9dfa25c7f95b543c280e0edf1fd8de6e90985 upstream.
This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1697,8 +1697,7 @@ err_out_unregister_driver:
uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
err_out_id:
mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
+ clear_bit(cdns_uart_data->id, bitmap);
mutex_unlock(&bitmap_lock);
return rc;
}
@@ -1723,8 +1722,7 @@ static int cdns_uart_remove(struct platf
rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
port->mapbase = 0;
mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
+ clear_bit(cdns_uart_data->id, bitmap);
mutex_unlock(&bitmap_lock);
clk_disable_unprepare(cdns_uart_data->uartclk);
clk_disable_unprepare(cdns_uart_data->pclk);
From: Jarkko Sakkinen <[email protected]>
commit b160c94be5d2816b62c8ac338605668304242959 upstream.
Call disable_interrupts() if we have to revert to polling in order not to
unnecessarily reserve the IRQ for the life-cycle of the driver.
Cc: [email protected] # 4.5.x
Reported-by: Hans de Goede <[email protected]>
Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup")
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -433,6 +433,9 @@ static void disable_interrupts(struct tp
u32 intmask;
int rc;
+ if (priv->irq == 0)
+ return;
+
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
intmask = 0;
@@ -983,9 +986,12 @@ int tpm_tis_core_init(struct device *dev
if (irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
irq);
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
dev_err(&chip->dev, FW_BUG
"TPM interrupt not working, polling instead\n");
+
+ disable_interrupts(chip);
+ }
} else {
tpm_tis_probe_irq(chip, intmask);
}
From: Michael Ellerman <[email protected]>
commit 61da50b76b62fd815aa82d853bf82bf4f69568f5 upstream.
Currently you can enable PPC_KUAP_DEBUG when PPC_KUAP is disabled,
even though the former has not effect without the latter.
Fix it so that PPC_KUAP_DEBUG can only be enabled when PPC_KUAP is
enabled, not when the platform could support KUAP (PPC_HAVE_KUAP).
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/Kconfig.cputype | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -389,7 +389,7 @@ config PPC_KUAP
config PPC_KUAP_DEBUG
bool "Extra debugging for Kernel Userspace Access Protection"
- depends on PPC_HAVE_KUAP && (PPC_RADIX_MMU || PPC_32)
+ depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
help
Add extra debugging for Kernel Userspace Access Protection (KUAP)
If you're unsure, say N.
From: Christophe Leroy <[email protected]>
commit feb8e960d780e170e992a70491eec9dd68f4dbf2 upstream.
CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32
which doesn't exists.
Fixing it leads to a deadlock due to a vital register getting
clobbered in _switch().
Change dependency to PPC32 and use r0 instead of r4 in _switch()
Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: [email protected] # v5.2+
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/entry_32.S | 2 +-
arch/powerpc/platforms/Kconfig.cputype | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -705,7 +705,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
stw r10,_CCR(r1)
stw r1,KSP(r3) /* Set old stack pointer */
- kuap_check r2, r4
+ kuap_check r2, r0
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -389,7 +389,7 @@ config PPC_KUAP
config PPC_KUAP_DEBUG
bool "Extra debugging for Kernel Userspace Access Protection"
- depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
+ depends on PPC_KUAP && (PPC_RADIX_MMU || PPC32)
help
Add extra debugging for Kernel Userspace Access Protection (KUAP)
If you're unsure, say N.
From: Malcolm Priestley <[email protected]>
commit 664ba5180234593b4b8517530e8198bf2f7359e2 upstream.
vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES,
BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT
Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode.
Fixes an issue that preamble mode is not being updated correctly.
Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6656/main_usb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -633,8 +633,6 @@ static int vnt_add_interface(struct ieee
priv->op_mode = vif->type;
- vnt_set_bss_mode(priv);
-
/* LED blink on TX */
vnt_mac_set_led(priv, LEDSTS_STS, LEDSTS_INTER);
@@ -721,7 +719,6 @@ static void vnt_bss_info_changed(struct
priv->basic_rates = conf->basic_rates;
vnt_update_top_rates(priv);
- vnt_set_bss_mode(priv);
dev_dbg(&priv->usb->dev, "basic rates %x\n", conf->basic_rates);
}
@@ -750,11 +747,14 @@ static void vnt_bss_info_changed(struct
priv->short_slot_time = false;
vnt_set_short_slot_time(priv);
- vnt_update_ifs(priv);
vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
vnt_update_pre_ed_threshold(priv, false);
}
+ if (changed & (BSS_CHANGED_BASIC_RATES | BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT))
+ vnt_set_bss_mode(priv);
+
if (changed & BSS_CHANGED_TXPOWER)
vnt_rf_setpower(priv, priv->current_rate,
conf->chandef.chan->hw_value);
From: Jiri Slaby <[email protected]>
commit 7127d24372bf23675a36edc64d092dc7fd92ebe8 upstream.
init_r_port can access pc104 array out of bounds. pc104 is a 2D array
defined to have 4 members. Each member has 8 submembers.
* we can have more than 4 (PCI) boards, i.e. [board] can be OOB
* line is not modulo-ed by anything, so the first line on the second
board can be 4, on the 3rd 12 or alike (depending on previously
registered boards). It's zero only on the first line of the first
board. So even [line] can be OOB, quite soon (with the 2nd registered
board already).
This code is broken for ages, so just avoid the OOB accesses and don't
try to fix it as we would need to find out the correct line number. Use
the default: RS232, if we are out.
Generally, if anyone needs to set the interface types, a module parameter
is past the last thing that should be used for this purpose. The
parameters' description says it's for ISA cards anyway.
Signed-off-by: Jiri Slaby <[email protected]>
Cc: stable <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/rocket.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -632,18 +632,21 @@ init_r_port(int board, int aiop, int cha
tty_port_init(&info->port);
info->port.ops = &rocket_port_ops;
info->flags &= ~ROCKET_MODE_MASK;
- switch (pc104[board][line]) {
- case 422:
- info->flags |= ROCKET_MODE_RS422;
- break;
- case 485:
- info->flags |= ROCKET_MODE_RS485;
- break;
- case 232:
- default:
+ if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1))
+ switch (pc104[board][line]) {
+ case 422:
+ info->flags |= ROCKET_MODE_RS422;
+ break;
+ case 485:
+ info->flags |= ROCKET_MODE_RS485;
+ break;
+ case 232:
+ default:
+ info->flags |= ROCKET_MODE_RS232;
+ break;
+ }
+ else
info->flags |= ROCKET_MODE_RS232;
- break;
- }
info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
From: Malcolm Priestley <[email protected]>
commit 0b59f10b1d8fe8d50944f21f5d403df9303095a8 upstream.
The problem is that the group key was saved as VNT_KEY_DEFAULTKEY
was over written by the VNT_KEY_GROUP_ADDRESS index.
mac80211 could not clear the mac_addr in the default key.
The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as
VNT_KEY_GROUP_ADDRESS.
mac80211 can clear any key using vnt_mac_disable_keyentry.
Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6656/key.c | 14 +++-----------
drivers/staging/vt6656/main_usb.c | 6 +++++-
2 files changed, 8 insertions(+), 12 deletions(-)
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -83,9 +83,6 @@ static int vnt_set_keymode(struct ieee80
case VNT_KEY_PAIRWISE:
key_mode |= mode;
key_inx = 4;
- /* Don't save entry for pairwise key for station mode */
- if (priv->op_mode == NL80211_IFTYPE_STATION)
- clear_bit(entry, &priv->key_entry_inuse);
break;
default:
return -EINVAL;
@@ -109,7 +106,6 @@ static int vnt_set_keymode(struct ieee80
int vnt_set_keys(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
struct ieee80211_vif *vif, struct ieee80211_key_conf *key)
{
- struct ieee80211_bss_conf *conf = &vif->bss_conf;
struct vnt_private *priv = hw->priv;
u8 *mac_addr = NULL;
u8 key_dec_mode = 0;
@@ -151,16 +147,12 @@ int vnt_set_keys(struct ieee80211_hw *hw
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
}
- if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
vnt_set_keymode(hw, mac_addr, key, VNT_KEY_PAIRWISE,
key_dec_mode, true);
- } else {
- vnt_set_keymode(hw, mac_addr, key, VNT_KEY_DEFAULTKEY,
+ else
+ vnt_set_keymode(hw, mac_addr, key, VNT_KEY_GROUP_ADDRESS,
key_dec_mode, true);
- vnt_set_keymode(hw, (u8 *)conf->bssid, key,
- VNT_KEY_GROUP_ADDRESS, key_dec_mode, true);
- }
-
return 0;
}
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -866,8 +866,12 @@ static int vnt_set_key(struct ieee80211_
return -EOPNOTSUPP;
break;
case DISABLE_KEY:
- if (test_bit(key->hw_key_idx, &priv->key_entry_inuse))
+ if (test_bit(key->hw_key_idx, &priv->key_entry_inuse)) {
clear_bit(key->hw_key_idx, &priv->key_entry_inuse);
+
+ vnt_mac_disable_keyentry(priv, key->hw_key_idx);
+ }
+
default:
break;
}
From: Changming Liu <[email protected]>
commit 2df7405f79ce1674d73c2786fe1a8727c905d65b upstream.
Change a bunch of arguments of wrapper functions which pass signed
integer to an unsigned integer which might cause undefined behaviors
when sign integer overflow.
Signed-off-by: Changming Liu <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/sisusbvga/sisusb.c | 20 ++++++++++----------
drivers/usb/misc/sisusbvga/sisusb_init.h | 14 +++++++-------
2 files changed, 17 insertions(+), 17 deletions(-)
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1199,18 +1199,18 @@ static int sisusb_read_mem_bulk(struct s
/* High level: Gfx (indexed) register access */
#ifdef CONFIG_USB_SISUSBVGA_CON
-int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
+int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data)
{
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
-int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
+int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 *data)
{
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
#endif
-int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data)
{
int ret;
@@ -1220,7 +1220,7 @@ int sisusb_setidxreg(struct sisusb_usb_d
return ret;
}
-int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 *data)
{
int ret;
@@ -1230,7 +1230,7 @@ int sisusb_getidxreg(struct sisusb_usb_d
return ret;
}
-int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port, u8 idx,
u8 myand, u8 myor)
{
int ret;
@@ -1245,7 +1245,7 @@ int sisusb_setidxregandor(struct sisusb_
}
static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
- int port, u8 idx, u8 data, u8 mask)
+ u32 port, u8 idx, u8 data, u8 mask)
{
int ret;
u8 tmp;
@@ -1258,13 +1258,13 @@ static int sisusb_setidxregmask(struct s
return ret;
}
-int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor)
{
return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
}
-int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand)
{
return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
@@ -2785,8 +2785,8 @@ static loff_t sisusb_lseek(struct file *
static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
struct sisusb_command *y, unsigned long arg)
{
- int retval, port, length;
- u32 address;
+ int retval, length;
+ u32 port, address;
/* All our commands require the device
* to be initialized.
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -812,17 +812,17 @@ static const struct SiS_VCLKData SiSUSB_
int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
-extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
-extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data);
-extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 * data);
-extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand, u8 myor);
-extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor);
-extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand);
void sisusb_delete(struct kref *kref);
From: Eric W. Biederman <[email protected]>
commit 61e713bdca3678e84815f2427f7a063fc353a1fc upstream.
Christof Meerwald <[email protected]> writes:
> Hi,
>
> this is probably related to commit
> 7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace
> fixups of si_pid and si_uid).
>
> With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a
> properly set si_pid field - this seems to happen for multi-threaded
> child processes.
>
> A simple test program (based on the sample from the signalfd man page):
>
> #include <sys/signalfd.h>
> #include <signal.h>
> #include <unistd.h>
> #include <spawn.h>
> #include <stdlib.h>
> #include <stdio.h>
>
> #define handle_error(msg) \
> do { perror(msg); exit(EXIT_FAILURE); } while (0)
>
> int main(int argc, char *argv[])
> {
> sigset_t mask;
> int sfd;
> struct signalfd_siginfo fdsi;
> ssize_t s;
>
> sigemptyset(&mask);
> sigaddset(&mask, SIGCHLD);
>
> if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
> handle_error("sigprocmask");
>
> pid_t chldpid;
> char *chldargv[] = { "./sfdclient", NULL };
> posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL);
>
> sfd = signalfd(-1, &mask, 0);
> if (sfd == -1)
> handle_error("signalfd");
>
> for (;;) {
> s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
> if (s != sizeof(struct signalfd_siginfo))
> handle_error("read");
>
> if (fdsi.ssi_signo == SIGCHLD) {
> printf("Got SIGCHLD %d %d %d %d\n",
> fdsi.ssi_status, fdsi.ssi_code,
> fdsi.ssi_uid, fdsi.ssi_pid);
> return 0;
> } else {
> printf("Read unexpected signal\n");
> }
> }
> }
>
>
> and a multi-threaded client to test with:
>
> #include <unistd.h>
> #include <pthread.h>
>
> void *f(void *arg)
> {
> sleep(100);
> }
>
> int main()
> {
> pthread_t t[8];
>
> for (int i = 0; i != 8; ++i)
> {
> pthread_create(&t[i], NULL, f, NULL);
> }
> }
>
> I tried to do a bit of debugging and what seems to be happening is
> that
>
> /* From an ancestor pid namespace? */
> if (!task_pid_nr_ns(current, task_active_pid_ns(t))) {
>
> fails inside task_pid_nr_ns because the check for "pid_alive" fails.
>
> This code seems to be called from do_notify_parent and there we
> actually have "tsk != current" (I am assuming both are threads of the
> current process?)
I instrumented the code with a warning and received the following backtrace:
> WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15
> Modules linked in:
> CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924
> Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15
> Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd
> RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046
> RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29
> RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001
> R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140
> FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0
> Call Trace:
> send_signal+0x1c8/0x310
> do_notify_parent+0x50f/0x550
> release_task.part.21+0x4fd/0x620
> do_exit+0x6f6/0xaf0
> do_group_exit+0x42/0xb0
> get_signal+0x13b/0xbb0
> do_signal+0x2b/0x670
> ? __audit_syscall_exit+0x24d/0x2b0
> ? rcu_read_lock_sched_held+0x4d/0x60
> ? kfree+0x24c/0x2b0
> do_syscall_64+0x176/0x640
> ? trace_hardirqs_off_thunk+0x1a/0x1c
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
The immediate problem is as Christof noticed that "pid_alive(current) == false".
This happens because do_notify_parent is called from the last thread to exit
in a process after that thread has been reaped.
The bigger issue is that do_notify_parent can be called from any
process that manages to wait on a thread of a multi-threaded process
from wait_task_zombie. So any logic based upon current for
do_notify_parent is just nonsense, as current can be pretty much
anything.
So change do_notify_parent to call __send_signal directly.
Inspecting the code it appears this problem has existed since the pid
namespace support started handling this case in 2.6.30. This fix only
backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid")
where the problem logic was moved out of __send_signal and into send_signal.
Cc: [email protected]
Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary")
Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Christof Meerwald <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1993,8 +1993,12 @@ bool do_notify_parent(struct task_struct
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
sig = 0;
}
+ /*
+ * Send with __send_signal as si_pid and si_uid are in the
+ * parent's namespaces.
+ */
if (valid_signal(sig) && sig)
- __group_send_sig_info(sig, &info, tsk->parent);
+ __send_signal(sig, &info, tsk->parent, PIDTYPE_TGID, false);
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
From: Paul Moore <[email protected]>
commit 763dafc520add02a1f4639b500c509acc0ea8e5b upstream.
Commit 756125289285 ("audit: always check the netlink payload length
in audit_receive_msg()") fixed a number of missing message length
checks, but forgot to check the length of userspace generated audit
records. The good news is that you need CAP_AUDIT_WRITE to submit
userspace audit records, which is generally only given to trusted
processes, so the impact should be limited.
Cc: [email protected]
Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()")
Reported-by: [email protected]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/audit.c | 3 +++
1 file changed, 3 insertions(+)
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1325,6 +1325,9 @@ static int audit_receive_msg(struct sk_b
case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2:
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
+ /* exit early if there isn't at least one character to print */
+ if (data_len < 2)
+ return -EINVAL;
err = audit_filter(msg_type, AUDIT_FILTER_USER);
if (err == 1) { /* match or error */
From: Oliver Neukum <[email protected]>
commit 0afccd7601514c4b83d8cc58c740089cc447051d upstream.
Suspend increments a counter, then kills the URBs,
then kills the scheduled work. The scheduled work, however,
may reschedule the URBs. Fix this by having the work
check the counter.
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Tested-by: Jonas Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -557,14 +557,14 @@ static void acm_softint(struct work_stru
struct acm *acm = container_of(work, struct acm, work);
if (test_bit(EVENT_RX_STALL, &acm->flags)) {
- if (!(usb_autopm_get_interface(acm->data))) {
+ smp_mb(); /* against acm_suspend() */
+ if (!acm->susp_count) {
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->read_urbs[i]);
usb_clear_halt(acm->dev, acm->in);
acm_submit_read_urbs(acm, GFP_KERNEL);
- usb_autopm_put_interface(acm->data);
+ clear_bit(EVENT_RX_STALL, &acm->flags);
}
- clear_bit(EVENT_RX_STALL, &acm->flags);
}
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
From: Xiyu Yang <[email protected]>
commit 332e0e17ad49e084b7db670ef43b5eb59abd9e34 upstream.
comedi_open() invokes comedi_dev_get_from_minor(), which returns a
reference of the COMEDI device to "dev" with increased refcount.
When comedi_open() returns, "dev" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
comedi_open(). When "cfp" allocation is failed, the refcnt increased by
comedi_dev_get_from_minor() is not decreased, causing a refcnt leak.
Fix this issue by calling comedi_dev_put() on this error path when "cfp"
allocation is failed.
Fixes: 20f083c07565 ("staging: comedi: prepare support for per-file read and write subdevices")
Signed-off-by: Xiyu Yang <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/comedi_fops.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2725,8 +2725,10 @@ static int comedi_open(struct inode *ino
}
cfp = kzalloc(sizeof(*cfp), GFP_KERNEL);
- if (!cfp)
+ if (!cfp) {
+ comedi_dev_put(dev);
return -ENOMEM;
+ }
cfp->dev = dev;
From: Oliver Neukum <[email protected]>
commit a4e7279cd1d19f48f0af2a10ed020febaa9ac092 upstream.
Immediate submission in case of a babbling device can lead
to a busy loop. Introducing a delayed work.
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Tested-by: Jonas Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 30 ++++++++++++++++++++++++++++--
drivers/usb/class/cdc-acm.h | 5 ++++-
2 files changed, 32 insertions(+), 3 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -412,9 +412,12 @@ static void acm_ctrl_irq(struct urb *urb
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval && retval != -EPERM)
+ if (retval && retval != -EPERM && retval != -ENODEV)
dev_err(&acm->control->dev,
"%s - usb_submit_urb failed: %d\n", __func__, retval);
+ else
+ dev_vdbg(&acm->control->dev,
+ "control resubmission terminated %d\n", retval);
}
static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
@@ -430,6 +433,8 @@ static int acm_submit_read_urb(struct ac
dev_err(&acm->data->dev,
"urb %d failed submission with %d\n",
index, res);
+ } else {
+ dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
}
set_bit(index, &acm->read_urbs_free);
return res;
@@ -471,6 +476,7 @@ static void acm_read_bulk_callback(struc
int status = urb->status;
bool stopped = false;
bool stalled = false;
+ bool cooldown = false;
dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
rb->index, urb->actual_length, status);
@@ -497,6 +503,14 @@ static void acm_read_bulk_callback(struc
__func__, status);
stopped = true;
break;
+ case -EOVERFLOW:
+ case -EPROTO:
+ dev_dbg(&acm->data->dev,
+ "%s - cooling babbling device\n", __func__);
+ usb_mark_last_busy(acm->dev);
+ set_bit(rb->index, &acm->urbs_in_error_delay);
+ cooldown = true;
+ break;
default:
dev_dbg(&acm->data->dev,
"%s - nonzero urb status received: %d\n",
@@ -518,9 +532,11 @@ static void acm_read_bulk_callback(struc
*/
smp_mb__after_atomic();
- if (stopped || stalled) {
+ if (stopped || stalled || cooldown) {
if (stalled)
schedule_work(&acm->work);
+ else if (cooldown)
+ schedule_delayed_work(&acm->dwork, HZ / 2);
return;
}
@@ -567,6 +583,12 @@ static void acm_softint(struct work_stru
}
}
+ if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+ for (i = 0; i < ACM_NR; i++)
+ if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+ acm_submit_read_urb(acm, i, GFP_NOIO);
+ }
+
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
tty_port_tty_wakeup(&acm->port);
}
@@ -1333,6 +1355,7 @@ made_compressed_probe:
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
INIT_WORK(&acm->work, acm_softint);
+ INIT_DELAYED_WORK(&acm->dwork, acm_softint);
init_waitqueue_head(&acm->wioctl);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
@@ -1542,6 +1565,7 @@ static void acm_disconnect(struct usb_in
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
tty_unregister_device(acm_tty_driver, acm->minor);
@@ -1584,6 +1608,8 @@ static int acm_suspend(struct usb_interf
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
+ acm->urbs_in_error_delay = 0;
return 0;
}
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -109,8 +109,11 @@ struct acm {
# define EVENT_TTY_WAKEUP 0
# define EVENT_RX_STALL 1
# define ACM_THROTTLED 2
+# define ACM_ERROR_DELAY 3
+ unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */
struct usb_cdc_line_coding line; /* bits, stop, parity */
- struct work_struct work; /* work queue entry for line discipline waking up */
+ struct work_struct work; /* work queue entry for various purposes*/
+ struct delayed_work dwork; /* for cool downs needed in error recovery */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
struct async_icount iocount; /* counters for control line changes */
From: Johannes Berg <[email protected]>
commit 6cb5f3ea4654faf8c28b901266e960b1a4787b26 upstream.
When fixing the initialization race, we neglected to account for
the fact that debugfs is initialized in wiphy_register(), and
some debugfs things went missing (or rather were rerooted to the
global debugfs root).
Fix this by adding debugfs entries only after wiphy_register().
This requires some changes in the rate control code since it
currently adds debugfs at alloc time, which can no longer be
done after the reordering.
Reported-by: Jouni Malinen <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Hauke Mehrtens <[email protected]>
Reported-by: Felix Fietkau <[email protected]>
Cc: [email protected]
Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()")
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlegacy/3945-rs.c | 2 +-
drivers/net/wireless/intel/iwlegacy/4965-rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/dvm/rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/rc.c | 2 +-
include/net/mac80211.h | 4 +++-
net/mac80211/main.c | 5 +++--
net/mac80211/rate.c | 15 ++++-----------
net/mac80211/rate.h | 23 +++++++++++++++++++++++
net/mac80211/rc80211_minstrel_ht.c | 19 +++++++++++++------
10 files changed, 51 insertions(+), 25 deletions(-)
--- a/drivers/net/wireless/intel/iwlegacy/3945-rs.c
+++ b/drivers/net/wireless/intel/iwlegacy/3945-rs.c
@@ -374,7 +374,7 @@ out:
}
static void *
-il3945_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il3945_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
--- a/drivers/net/wireless/intel/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c
@@ -2474,7 +2474,7 @@ il4965_rs_fill_link_cmd(struct il_priv *
}
static void *
-il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il4965_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
--- a/drivers/net/wireless/intel/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/rs.c
@@ -3019,7 +3019,7 @@ static void rs_fill_link_cmd(struct iwl_
cpu_to_le16(priv->lib->bt_params->agg_time_limit);
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -3663,7 +3663,7 @@ static void rs_fill_lq_cmd(struct iwl_mv
cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta));
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
--- a/drivers/net/wireless/realtek/rtlwifi/rc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rc.c
@@ -261,7 +261,7 @@ static void rtl_rate_update(void *ppriv,
{
}
-static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rtl_rate_alloc(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
return rtlpriv;
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -5933,7 +5933,9 @@ enum rate_control_capabilities {
struct rate_control_ops {
unsigned long capa;
const char *name;
- void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+ void *(*alloc)(struct ieee80211_hw *hw);
+ void (*add_debugfs)(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1155,8 +1155,6 @@ int ieee80211_register_hw(struct ieee802
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
IEEE80211_TX_STATUS_HEADROOM);
- debugfs_hw_add(local);
-
/*
* if the driver doesn't specify a max listen interval we
* use 5 which should be a safe default
@@ -1248,6 +1246,9 @@ int ieee80211_register_hw(struct ieee802
if (result < 0)
goto fail_wiphy_register;
+ debugfs_hw_add(local);
+ rate_control_add_debugfs(local);
+
rtnl_lock();
/* add one default STA interface if supported */
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -214,17 +214,16 @@ static ssize_t rcname_read(struct file *
ref->ops->name, len);
}
-static const struct file_operations rcname_ops = {
+const struct file_operations rcname_ops = {
.read = rcname_read,
.open = simple_open,
.llseek = default_llseek,
};
#endif
-static struct rate_control_ref *rate_control_alloc(const char *name,
- struct ieee80211_local *local)
+static struct rate_control_ref *
+rate_control_alloc(const char *name, struct ieee80211_local *local)
{
- struct dentry *debugfsdir = NULL;
struct rate_control_ref *ref;
ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL);
@@ -234,13 +233,7 @@ static struct rate_control_ref *rate_con
if (!ref->ops)
goto free;
-#ifdef CONFIG_MAC80211_DEBUGFS
- debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
- local->debugfs.rcdir = debugfsdir;
- debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops);
-#endif
-
- ref->priv = ref->ops->alloc(&local->hw, debugfsdir);
+ ref->priv = ref->ops->alloc(&local->hw);
if (!ref->priv)
goto free;
return ref;
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -60,6 +60,29 @@ static inline void rate_control_add_sta_
#endif
}
+extern const struct file_operations rcname_ops;
+
+static inline void rate_control_add_debugfs(struct ieee80211_local *local)
+{
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *debugfsdir;
+
+ if (!local->rate_ctrl)
+ return;
+
+ if (!local->rate_ctrl->ops->add_debugfs)
+ return;
+
+ debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
+ local->debugfs.rcdir = debugfsdir;
+ debugfs_create_file("name", 0400, debugfsdir,
+ local->rate_ctrl, &rcname_ops);
+
+ local->rate_ctrl->ops->add_debugfs(&local->hw, local->rate_ctrl->priv,
+ debugfsdir);
+#endif
+}
+
void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata);
/* Get a reference to the rate control algorithm. If `name' is NULL, get the
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -1631,7 +1631,7 @@ minstrel_ht_init_cck_rates(struct minstr
}
static void *
-minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+minstrel_ht_alloc(struct ieee80211_hw *hw)
{
struct minstrel_priv *mp;
@@ -1668,18 +1668,24 @@ minstrel_ht_alloc(struct ieee80211_hw *h
mp->hw = hw;
mp->update_interval = 100;
+ minstrel_ht_init_cck_rates(mp);
+
+ return mp;
+}
+
#ifdef CONFIG_MAC80211_DEBUGFS
+static void minstrel_ht_add_debugfs(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir)
+{
+ struct minstrel_priv *mp = priv;
+
mp->fixed_rate_idx = (u32) -1;
debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
&mp->fixed_rate_idx);
debugfs_create_u32("sample_switch", S_IRUGO | S_IWUSR, debugfsdir,
&mp->sample_switch);
-#endif
-
- minstrel_ht_init_cck_rates(mp);
-
- return mp;
}
+#endif
static void
minstrel_ht_free(void *priv)
@@ -1718,6 +1724,7 @@ static const struct rate_control_ops mac
.alloc = minstrel_ht_alloc,
.free = minstrel_ht_free,
#ifdef CONFIG_MAC80211_DEBUGFS
+ .add_debugfs = minstrel_ht_add_debugfs,
.add_sta_debugfs = minstrel_ht_add_sta_debugfs,
#endif
.get_expected_throughput = minstrel_ht_get_expected_throughput,
From: Malcolm Priestley <[email protected]>
commit ea81c3486442f4643fc9825a2bb1b430b829bccd upstream.
conf.listen_interval can sometimes be zero causing wake_up_count
to wrap around up to many beacons too late causing
CTRL-EVENT-BEACON-LOSS as in.
wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ]
Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6656/int.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/staging/vt6656/int.c
+++ b/drivers/staging/vt6656/int.c
@@ -145,7 +145,8 @@ void vnt_int_process_data(struct vnt_pri
priv->wake_up_count =
priv->hw->conf.listen_interval;
- --priv->wake_up_count;
+ if (priv->wake_up_count)
+ --priv->wake_up_count;
/* Turn on wake up to listen next beacon */
if (priv->wake_up_count == 1)
From: Arnd Bergmann <[email protected]>
commit 556d687a4ccd54ab50a721ddde42c820545effd9 upstream.
In order to use compat_* type defininitions in device drivers
outside of CONFIG_COMPAT, move the inclusion of asm-generic/compat.h
ahead of the #ifdef.
All other architectures already do this.
Acked-by: Will Deacon <[email protected]>
Reviewed-by: Ben Hutchings <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Naresh Kamboju <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/compat.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -4,6 +4,9 @@
*/
#ifndef __ASM_COMPAT_H
#define __ASM_COMPAT_H
+
+#include <asm-generic/compat.h>
+
#ifdef CONFIG_COMPAT
/*
@@ -13,8 +16,6 @@
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
-#include <asm-generic/compat.h>
-
#define COMPAT_USER_HZ 100
#ifdef __AARCH64EB__
#define COMPAT_UTS_MACHINE "armv8b\0\0"
From: Malcolm Priestley <[email protected]>
commit 09057742af98a39ebffa27fac4f889dc873132de upstream.
The drivers TBTT counter is not synchronized with mac80211 timestamp.
Reorder the functions and use vnt_update_next_tbtt to do the final
synchronize.
Fixes: c15158797df6 ("staging: vt6656: implement TSF counter")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6656/main_usb.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -778,12 +778,15 @@ static void vnt_bss_info_changed(struct
vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL,
TFTCTL_TSFCNTREN);
- vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
- conf->sync_tsf, priv->current_tsf);
-
vnt_mac_set_beacon_interval(priv, conf->beacon_int);
vnt_reset_next_tbtt(priv, conf->beacon_int);
+
+ vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
+ conf->sync_tsf, priv->current_tsf);
+
+ vnt_update_next_tbtt(priv,
+ conf->sync_tsf, conf->beacon_int);
} else {
vnt_clear_current_tsf(priv);
From: Malcolm Priestley <[email protected]>
commit 0f8240bfc070033a4823b19883efd3d38c7735cc upstream.
mac80211/users control whether multicast is on or off don't enable it by default.
Fixes an issue when multicast/broadcast is always on allowing other beacons through
in power save.
Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6656/main_usb.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -818,15 +818,11 @@ static void vnt_configure(struct ieee802
{
struct vnt_private *priv = hw->priv;
u8 rx_mode = 0;
- int rc;
*total_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC;
- rc = vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
- MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
-
- if (!rc)
- rx_mode = RCR_MULTICAST | RCR_BROADCAST;
+ vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
+ MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
dev_dbg(&priv->usb->dev, "rx mode in = %x\n", rx_mode);
From: Paulo Alcantara <[email protected]>
commit 0fe0781f29dd8ab618999e6bda33c782ebbdb109 upstream.
SMB2_open_init() expects a pre-initialised lease_key when opening a
file with a lease, so set pfid->lease_key prior to calling it in
open_shroot().
This issue was observed when performing some DFS failover tests and
the lease key was never randomly generated.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -664,6 +664,11 @@ int open_shroot(unsigned int xid, struct
if (smb3_encryption_required(tcon))
flags |= CIFS_TRANSFORM_REQ;
+ if (!server->ops->new_lease_key)
+ return -EIO;
+
+ server->ops->new_lease_key(pfid);
+
memset(rqst, 0, sizeof(rqst));
resp_buftype[0] = resp_buftype[1] = CIFS_NO_BUFFER;
memset(rsp_iov, 0, sizeof(rsp_iov));
From: Kazuhiro Fujita <[email protected]>
commit 3dc4db3662366306e54ddcbda4804acb1258e4ba upstream.
For SCIF and HSCIF interfaces the SCxSR register holds the status of
data that is to be read next from SCxRDR register, But where as for
SCIFA and SCIFB interfaces SCxSR register holds status of data that is
previously read from SCxRDR register.
This patch makes sure the status register is read depending on the port
types so that errors are caught accordingly.
Cc: <[email protected]>
Signed-off-by: Kazuhiro Fujita <[email protected]>
Signed-off-by: Hao Bui <[email protected]>
Signed-off-by: KAZUMI HARADA <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/sh-sci.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -873,9 +873,16 @@ static void sci_receive_chars(struct uar
tty_insert_flip_char(tport, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = serial_port_in(port, SCxRDR);
+ char c;
- status = serial_port_in(port, SCxSR);
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
From: Michal Simek <[email protected]>
commit 18cc7ac8a28e28cd005c2475f52576cfe10cabfb upstream.
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 95 +++++++++++++++----------------------
1 file changed, 40 insertions(+), 55 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -31,6 +31,7 @@
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
@@ -1118,6 +1119,8 @@ static const struct uart_ops cdns_uart_o
#endif
};
+static struct uart_driver cdns_uart_uart_driver;
+
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
@@ -1257,6 +1260,16 @@ static int cdns_uart_console_setup(struc
return uart_set_options(port, co, baud, parity, bits, flow);
}
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
#ifdef CONFIG_PM_SLEEP
@@ -1388,6 +1401,9 @@ static const struct of_device_id cdns_ua
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
+/* Temporary variable for storing number of instances */
+static int instances;
+
/**
* cdns_uart_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
@@ -1401,11 +1417,6 @@ static int cdns_uart_probe(struct platfo
struct resource *res;
struct cdns_uart *cdns_uart_data;
const struct of_device_id *match;
- struct uart_driver *cdns_uart_uart_driver;
- char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- struct console *cdns_uart_console;
-#endif
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
@@ -1415,12 +1426,6 @@ static int cdns_uart_probe(struct platfo
if (!port)
return -ENOMEM;
- cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
- sizeof(*cdns_uart_uart_driver),
- GFP_KERNEL);
- if (!cdns_uart_uart_driver)
- return -ENOMEM;
-
/* Look for a serialN alias */
id = of_alias_get_id(pdev->dev.of_node, "serial");
if (id < 0)
@@ -1431,50 +1436,25 @@ static int cdns_uart_probe(struct platfo
return -ENODEV;
}
- /* There is a need to use unique driver name */
- driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, id);
- if (!driver_name)
- return -ENOMEM;
-
- cdns_uart_uart_driver->owner = THIS_MODULE;
- cdns_uart_uart_driver->driver_name = driver_name;
- cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
- cdns_uart_uart_driver->minor = id;
- cdns_uart_uart_driver->nr = 1;
-
+ if (!cdns_uart_uart_driver.state) {
+ cdns_uart_uart_driver.owner = THIS_MODULE;
+ cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+ cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+ cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+ cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+ cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
- GFP_KERNEL);
- if (!cdns_uart_console)
- return -ENOMEM;
-
- strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
- sizeof(cdns_uart_console->name));
- cdns_uart_console->index = id;
- cdns_uart_console->write = cdns_uart_console_write;
- cdns_uart_console->device = uart_console_device;
- cdns_uart_console->setup = cdns_uart_console_setup;
- cdns_uart_console->flags = CON_PRINTBUFFER;
- cdns_uart_console->data = cdns_uart_uart_driver;
- cdns_uart_uart_driver->cons = cdns_uart_console;
+ cdns_uart_uart_driver.cons = &cdns_uart_console;
#endif
- rc = uart_register_driver(cdns_uart_uart_driver);
- if (rc < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- return rc;
+ rc = uart_register_driver(&cdns_uart_uart_driver);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return rc;
+ }
}
- cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
- /*
- * Setting up proper name_base needs to be done after uart
- * registration because tty_driver structure is not filled.
- * name_base is 0 by default.
- */
- cdns_uart_uart_driver->tty_driver->name_base = id;
+ cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
@@ -1551,6 +1531,7 @@ static int cdns_uart_probe(struct platfo
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
+ port->line = id;
/*
* Register the port.
@@ -1582,7 +1563,7 @@ static int cdns_uart_probe(struct platfo
console_port = port;
#endif
- rc = uart_add_one_port(cdns_uart_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
@@ -1592,12 +1573,15 @@ static int cdns_uart_probe(struct platfo
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
console_port = NULL;
#endif
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
+
+ instances++;
+
return 0;
err_out_pm_disable:
@@ -1613,8 +1597,8 @@ err_out_clk_disable:
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-
+ if (!instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
@@ -1649,7 +1633,8 @@ static int cdns_uart_remove(struct platf
console_port = NULL;
#endif
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+ if (!--instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
From: Michal Simek <[email protected]>
commit 492cc08bc16c44e2e587362ada3f6269dee2be22 upstream.
This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -183,7 +183,6 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout
* @pclk: APB clock
* @cdns_uart_driver: Pointer to UART driver
* @baud: Current baud rate
- * @id: Port ID
* @clk_rate_change_nb: Notifier block for clock changes
* @quirks: Flags for RXBS support.
*/
@@ -193,7 +192,6 @@ struct cdns_uart {
struct clk *pclk;
struct uart_driver *cdns_uart_driver;
unsigned int baud;
- int id;
struct notifier_block clk_rate_change_nb;
u32 quirks;
bool cts_override;
@@ -1398,7 +1396,7 @@ MODULE_DEVICE_TABLE(of, cdns_uart_of_mat
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, irq;
+ int rc, id, irq;
struct uart_port *port;
struct resource *res;
struct cdns_uart *cdns_uart_data;
@@ -1424,18 +1422,18 @@ static int cdns_uart_probe(struct platfo
return -ENOMEM;
/* Look for a serialN alias */
- cdns_uart_data->id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (cdns_uart_data->id < 0)
- cdns_uart_data->id = 0;
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (id < 0)
+ id = 0;
- if (cdns_uart_data->id >= CDNS_UART_NR_PORTS) {
+ if (id >= CDNS_UART_NR_PORTS) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
return -ENODEV;
}
/* There is a need to use unique driver name */
driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, cdns_uart_data->id);
+ CDNS_UART_NAME, id);
if (!driver_name)
return -ENOMEM;
@@ -1443,7 +1441,7 @@ static int cdns_uart_probe(struct platfo
cdns_uart_uart_driver->driver_name = driver_name;
cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
- cdns_uart_uart_driver->minor = cdns_uart_data->id;
+ cdns_uart_uart_driver->minor = id;
cdns_uart_uart_driver->nr = 1;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
@@ -1454,7 +1452,7 @@ static int cdns_uart_probe(struct platfo
strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
sizeof(cdns_uart_console->name));
- cdns_uart_console->index = cdns_uart_data->id;
+ cdns_uart_console->index = id;
cdns_uart_console->write = cdns_uart_console_write;
cdns_uart_console->device = uart_console_device;
cdns_uart_console->setup = cdns_uart_console_setup;
@@ -1476,7 +1474,7 @@ static int cdns_uart_probe(struct platfo
* registration because tty_driver structure is not filled.
* name_base is 0 by default.
*/
- cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id;
+ cdns_uart_uart_driver->tty_driver->name_base = id;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
From: Oliver Neukum <[email protected]>
commit 5963dec98dc52d52476390485f07a29c30c6a582 upstream.
Once a device is gone, the internal state does not matter anymore.
There is no need to spam the logs.
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Fixes: 326349f824619 ("uas: add dead request list")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/uas.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -190,6 +190,9 @@ static void uas_log_cmd_state(struct scs
struct uas_cmd_info *ci = (void *)&cmnd->SCp;
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ if (status == -ENODEV) /* too late */
+ return;
+
scmd_printk(KERN_INFO, cmnd,
"%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
prefix, status, cmdinfo->uas_tag,
From: Xu Yilun <[email protected]>
commit 3c2760b78f90db874401d97e3c17829e2e36f400 upstream.
pci_driver.sriov_configure should return negative value on error and
number of enabled VFs on success. But now the driver returns 0 on
success. The sriov configure still works but will cause a warning
message:
XX VFs requested; only 0 enabled
This patch changes the return value accordingly.
Cc: [email protected]
Signed-off-by: Xu Yilun <[email protected]>
Signed-off-by: Wu Hao <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/fpga/dfl-pci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -248,11 +248,13 @@ static int cci_pci_sriov_configure(struc
return ret;
ret = pci_enable_sriov(pcidev, num_vfs);
- if (ret)
+ if (ret) {
dfl_fpga_cdev_config_ports_pf(cdev);
+ return ret;
+ }
}
- return ret;
+ return num_vfs;
}
static void cci_pci_remove(struct pci_dev *pcidev)
From: Alan Stern <[email protected]>
commit 3155f4f40811c5d7e3c686215051acf504e05565 upstream.
Commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for
high speed devices") changed the way the hub driver enumerates
high-speed devices. Instead of using the "new" enumeration scheme
first and switching to the "old" scheme if that doesn't work, we start
with the "old" scheme. In theory this is better because the "old"
scheme is slightly faster -- it involves resetting the device only
once instead of twice.
However, for a long time Windows used only the "new" scheme. Zeng Tao
said that Windows 8 and later use the "old" scheme for high-speed
devices, but apparently there are some devices that don't like it.
William Bader reports that the Ricoh webcam built into his Sony Vaio
laptop not only doesn't enumerate under the "old" scheme, it gets hung
up so badly that it won't then enumerate under the "new" scheme! Only
a cold reset will fix it.
Therefore we will revert the commit and go back to trying the "new"
scheme first for high-speed devices.
Reported-and-tested-by: William Bader <[email protected]>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207219
Signed-off-by: Alan Stern <[email protected]>
Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
CC: Zeng Tao <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 3 +--
drivers/usb/core/hub.c | 4 +---
2 files changed, 2 insertions(+), 5 deletions(-)
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5005,8 +5005,7 @@
usbcore.old_scheme_first=
[USB] Start with the old device initialization
- scheme, applies only to low and full-speed devices
- (default 0 = off).
+ scheme (default 0 = off).
usbcore.usbfs_memory_mb=
[USB] Memory limit (in MB) for buffers allocated by
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2727,13 +2727,11 @@ static bool use_new_scheme(struct usb_de
{
int old_scheme_first_port =
port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
- int quick_enumeration = (udev->speed == USB_SPEED_HIGH);
if (udev->speed >= USB_SPEED_SUPER)
return false;
- return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first
- || quick_enumeration);
+ return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
}
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
From: Udipto Goswami <[email protected]>
commit 1c2e54fbf1da5e5445a0ab132c862b02ccd8d230 upstream.
For userspace functions using OS Descriptors, if a function also supplies
Extended Property descriptors currently the counts and lengths stored in
the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not
getting reset to 0 during an unbind or when the epfiles are closed. If
the same function is re-bound and the descriptors are re-written, this
results in those count/length variables to monotonically increase
causing the VLA allocation in _ffs_func_bind() to grow larger and larger
at each bind/unbind cycle and eventually fail to allocate.
Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in
ffs_data_reset().
Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support")
Cc: [email protected]
Signed-off-by: Udipto Goswami <[email protected]>
Signed-off-by: Sriharsha Allenki <[email protected]>
Reviewed-by: Manu Gautam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1828,6 +1828,10 @@ static void ffs_data_reset(struct ffs_da
ffs->state = FFS_READ_DESCRIPTORS;
ffs->setup_state = FFS_NO_SETUP;
ffs->flags = 0;
+
+ ffs->ms_os_descs_ext_prop_count = 0;
+ ffs->ms_os_descs_ext_prop_name_len = 0;
+ ffs->ms_os_descs_ext_prop_data_len = 0;
}
From: Badhri Jagan Sridharan <[email protected]>
commit 901789745a053286e0ced37960d44fa60267b940 upstream.
After PORT_RESET, the port is set to the appropriate
default_state. Ignore processing CC changes here as this
could cause the port to be switched into sink states
by default.
echo source > /sys/class/typec/port0/port_type
Before:
[ 154.528547] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms
[ 154.528560] CC1: 0 -> 0, CC2: 3 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 154.528564] state change PORT_RESET -> SNK_UNATTACHED
After:
[ 151.068814] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[ 151.072440] CC1: 3 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 151.172117] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 151.172136] pending state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED @ 870 ms [rev3 NONE_AMS]
[ 152.060106] state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED [delayed 870 ms]
[ 152.060118] Start toggling
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -3768,6 +3768,14 @@ static void _tcpm_cc_change(struct tcpm_
*/
break;
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore CC changes here.
+ */
+ break;
+
default:
if (tcpm_port_is_disconnected(port))
tcpm_set_state(port, unattached_state(port), 0);
@@ -3829,6 +3837,15 @@ static void _tcpm_pd_vbus_on(struct tcpm
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
break;
}
@@ -3882,10 +3899,19 @@ static void _tcpm_pd_vbus_off(struct tcp
case PORT_RESET_WAIT_OFF:
tcpm_set_state(port, tcpm_default_state(port), 0);
break;
+
case SRC_TRY_WAIT:
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
if (port->pwr_role == TYPEC_SINK &&
port->attached)
From: Mathias Nyman <[email protected]>
commit e9fb08d617bfae5471d902112667d0eeb9dee3c4 upstream.
Suspending the bus and host controller while a port is in a over-current
condition may halt the host.
Also keep the roothub running if over-current is active.
Cc: <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1569,6 +1569,8 @@ int xhci_hub_status_data(struct usb_hcd
}
if ((temp & PORT_RC))
reset_change = true;
+ if (temp & PORT_OC)
+ status = 1;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
@@ -1634,6 +1636,13 @@ retry:
port_index);
goto retry;
}
+ /* bail out if port detected a over-current condition */
+ if (t1 & PORT_OC) {
+ bus_state->bus_suspended = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+ return -EBUSY;
+ }
/* suspend ports in U0, or bail out for new connect changes */
if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
if ((t1 & PORT_CSC) && wake_enabled) {
From: Chris Packham <[email protected]>
commit 94c0b013c98583614e1ad911e8795ca36da34a85 upstream.
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.
Originally the code would fallback from block size to line size. An
error message was printed if both properties were missing.
Later the code was refactored to use clearer names and logic but it
inadvertently made line size a required property, meaning on systems
without a line size property we fall back to the default from the
cputable.
On powernv (OPAL) platforms, since the introduction of device tree CPU
features (5a61ef74f269 ("powerpc/64s: Support new device tree binding
for discovering CPU features")), that has led to the wrong value being
used, as the fallback value is incorrect for Power8/Power9 CPUs.
The incorrect values flow through to the VDSO and also to the sysconf
values, SC_LEVEL1_ICACHE_LINESIZE etc.
Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line")
Cc: [email protected] # v4.11+
Signed-off-by: Chris Packham <[email protected]>
Reported-by: Qian Cai <[email protected]>
[mpe: Add even more detail to change log]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/setup_64.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -541,6 +541,8 @@ static bool __init parse_cache_info(stru
lsizep = of_get_property(np, propnames[3], NULL);
if (bsizep == NULL)
bsizep = lsizep;
+ if (lsizep == NULL)
+ lsizep = bsizep;
if (lsizep != NULL)
lsize = be32_to_cpu(*lsizep);
if (bsizep != NULL)
From: Ian Abbott <[email protected]>
commit ed87d33ddbcd9a1c3b5ae87995da34e6f51a862c upstream.
The DT2815 analog output command is 16 bits wide, consisting of the
12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1,
and a voltage or current selector in bit 0. Both bytes of the 16-bit
command need to be written in turn to a single 8-bit data register.
However, the driver currently only writes the low 8-bits. It is broken
and appears to have always been broken.
Electronic copies of the DT2815 User's Manual seem impossible to find
online, but looking at the source code, a best guess for the sequence
the driver intended to use to write the analog output command is as
follows:
1. Wait for the status register to read 0x00.
2. Write the low byte of the command to the data register.
3. Wait for the status register to read 0x80.
4. Write the high byte of the command to the data register.
Step 4 is missing from the driver. Add step 4 to (hopefully) fix the
driver.
Also add a "FIXME" comment about setting bit 0 of the low byte of the
command. Supposedly, it is used to choose between voltage output and
current output, but the current driver always sets it to 1.
Signed-off-by: Ian Abbott <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/dt2815.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -92,6 +92,7 @@ static int dt2815_ao_insn(struct comedi_
int ret;
for (i = 0; i < insn->n; i++) {
+ /* FIXME: lo bit 0 chooses voltage output or current output */
lo = ((data[i] & 0x0f) << 4) | (chan << 1) | 0x01;
hi = (data[i] & 0xff0) >> 4;
@@ -105,6 +106,8 @@ static int dt2815_ao_insn(struct comedi_
if (ret)
return ret;
+ outb(hi, dev->iobase + DT2815_DATA);
+
devpriv->ao_readback[chan] = data[i];
}
return i;
From: Michal Simek <[email protected]>
commit b6fd2dbbd649b89a3998528994665ded1e3fbf7f upstream.
This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1528,10 +1528,8 @@ static int cdns_uart_probe(struct platfo
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
GFP_KERNEL);
- if (!cdns_uart_console) {
- rc = -ENOMEM;
- goto err_out_id;
- }
+ if (!cdns_uart_console)
+ return -ENOMEM;
strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
sizeof(cdns_uart_console->name));
From: Mordechay Goodstein <[email protected]>
commit 290d5e4951832e39d10f4184610dbf09038f8483 upstream.
We reset statistics also in case that we didn't reassoc so in
this cases keep last beacon counter.
Cc: [email protected] # v4.19+
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
@@ -8,7 +8,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -31,7 +31,7 @@
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -566,6 +566,7 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *
struct iwl_mvm_stat_data {
struct iwl_mvm *mvm;
+ __le32 flags;
__le32 mac_id;
u8 beacon_filter_average_energy;
void *general;
@@ -606,6 +607,13 @@ static void iwl_mvm_stat_iterator(void *
-general->beacon_average_energy[vif_id];
}
+ /* make sure that beacon statistics don't go backwards with TCM
+ * request to clear statistics
+ */
+ if (le32_to_cpu(data->flags) & IWL_STATISTICS_REPLY_FLG_CLEAR)
+ mvmvif->beacon_stats.accu_num_beacons +=
+ mvmvif->beacon_stats.num_beacons;
+
if (mvmvif->id != id)
return;
@@ -763,6 +771,7 @@ void iwl_mvm_handle_rx_statistics(struct
flags = stats->flag;
}
+ data.flags = flags;
iwl_mvm_rx_stats_check_trigger(mvm, pkt);
From: Jann Horn <[email protected]>
commit 7dbdb53d72a51cea9b921d9dbba54be00752212a upstream.
This fixes a bug that causes the USB3 early console to freeze after
printing a single line on AMD machines because it can't parse the
Transfer TRB properly.
The spec at
https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
says in section "4.5.1 Device Context Index" that the Context Index,
also known as Endpoint ID according to
section "1.6 Terms and Abbreviations", is normally computed as
`DCI = (Endpoint Number * 2) + Direction`, which matches the current
definitions of XDBC_EPID_OUT and XDBC_EPID_IN.
However, the numbering in a Debug Capability Context data structure is
supposed to be different:
Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a
Debug Capability Context data structure has the endpoints mapped to indices
0 and 1.
Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add
XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and
let xdbc_handle_tx_event() handle both.
I have verified that with this patch applied, the USB3 early console works
on both an Intel and an AMD machine.
Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
Cc: [email protected]
Signed-off-by: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/early/xhci-dbc.c | 8 ++++----
drivers/usb/early/xhci-dbc.h | 18 ++++++++++++++++--
2 files changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -728,19 +728,19 @@ static void xdbc_handle_tx_event(struct
case COMP_USB_TRANSACTION_ERROR:
case COMP_STALL_ERROR:
default:
- if (ep_id == XDBC_EPID_OUT)
+ if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL)
xdbc.flags |= XDBC_FLAGS_OUT_STALL;
- if (ep_id == XDBC_EPID_IN)
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL)
xdbc.flags |= XDBC_FLAGS_IN_STALL;
xdbc_trace("endpoint %d stalled\n", ep_id);
break;
}
- if (ep_id == XDBC_EPID_IN) {
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
- } else if (ep_id == XDBC_EPID_OUT) {
+ } else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
} else {
xdbc_trace("invalid endpoint id %d\n", ep_id);
--- a/drivers/usb/early/xhci-dbc.h
+++ b/drivers/usb/early/xhci-dbc.h
@@ -120,8 +120,22 @@ struct xdbc_ring {
u32 cycle_state;
};
-#define XDBC_EPID_OUT 2
-#define XDBC_EPID_IN 3
+/*
+ * These are the "Endpoint ID" (also known as "Context Index") values for the
+ * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data
+ * structure.
+ * According to the "eXtensible Host Controller Interface for Universal Serial
+ * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer
+ * Rings", these should be 0 and 1, and those are the values AMD machines give
+ * you; but Intel machines seem to use the formula from section "4.5.1 Device
+ * Context Index", which is supposed to be used for the Device Context only.
+ * Luckily the values from Intel don't overlap with those from AMD, so we can
+ * just test for both.
+ */
+#define XDBC_EPID_OUT 0
+#define XDBC_EPID_IN 1
+#define XDBC_EPID_OUT_INTEL 2
+#define XDBC_EPID_IN_INTEL 3
struct xdbc_state {
u16 vendor;
From: Alan Stern <[email protected]>
commit 94f9c8c3c404ee1f7aaff81ad4f24aec4e34a78b upstream.
Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails
to handle WRITE commands with the FUA bit set, even though it claims
to support FUA. (Oddly enough, a later version of the same bridge,
version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also
oddly, the bridge _does_ support FUA when using the UAS transport
instead of the Bulk-Only transport -- but this device was blacklisted
for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron
SATA enclosure") for apparently unrelated reasons.)
This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA
flag. This allows the bridge to work properly with usb-storage.
Reported-and-tested-by: Cyril Roelandt <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2323,6 +2323,13 @@ UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x
USB_SC_DEVICE,USB_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Cyril Roelandt <[email protected]> */
+UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
/* Reported by Andrey Rahmatullin <[email protected]> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
From: Andrew Melnychenko <[email protected]>
commit 9a9fc42b86c06120744555fea43fdcabe297c656 upstream.
If there is a lot(more then 16) of virtio-console devices
or virtio_console module is reloaded
- buffers 'vtermnos' and 'cons_ops' are overflowed.
In older kernels it overruns spinlock which leads to kernel freezing:
https://bugzilla.redhat.com/show_bug.cgi?id=1786239
To reproduce the issue, you can try simple script that
loads/unloads module. Something like this:
while [ 1 ]
do
modprobe virtio_console
sleep 2
modprobe -r virtio_console
sleep 2
done
Description of problem:
Guest get 'Call Trace' when loading module "virtio_console"
and unloading it frequently - clearly reproduced on kernel-4.18.0:
[ 81.498208] ------------[ cut here ]------------
[ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0!
[ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0
[ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console]
[ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1
[ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014
[ 81.520205] Workqueue: events control_work_handler [virtio_console]
[ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0
[ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48
[ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282
[ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000
[ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08
[ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053
[ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200
[ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000
[ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000
[ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0
[ 81.537283] Call Trace:
[ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20
[ 81.539011] .slowpath+0x9/0xe
[ 81.539585] hvc_alloc+0x25e/0x300
[ 81.540237] init_port_console+0x28/0x100 [virtio_console]
[ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console]
[ 81.542546] control_work_handler+0x70/0x10c [virtio_console]
[ 81.543601] process_one_work+0x1a7/0x3b0
[ 81.544356] worker_thread+0x30/0x390
[ 81.545025] ? create_worker+0x1a0/0x1a0
[ 81.545749] kthread+0x112/0x130
[ 81.546358] ? kthread_flush_work_fn+0x10/0x10
[ 81.547183] ret_from_fork+0x22/0x40
[ 81.547842] ---[ end trace aa97649bd16c8655 ]---
[ 83.546539] general protection fault: 0000 [#1] SMP NOPTI
[ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1
[ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014
[ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0
[ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84
[ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202
[ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001
[ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000
[ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788
[ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07
[ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000
[ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000
[ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0
Signed-off-by: Andrew Melnychenko <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/hvc/hvc_console.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -302,10 +302,6 @@ int hvc_instantiate(uint32_t vtermno, in
vtermnos[index] = vtermno;
cons_ops[index] = ops;
- /* reserve all indices up to and including this index */
- if (last_hvc < index)
- last_hvc = index;
-
/* check if we need to re-register the kernel console */
hvc_check_console(index);
@@ -960,13 +956,22 @@ struct hvc_struct *hvc_alloc(uint32_t vt
cons_ops[i] == hp->ops)
break;
- /* no matching slot, just use a counter */
- if (i >= MAX_NR_HVC_CONSOLES)
- i = ++last_hvc;
+ if (i >= MAX_NR_HVC_CONSOLES) {
+
+ /* find 'empty' slot for console */
+ for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) {
+ }
+
+ /* no matching slot, just use a counter */
+ if (i == MAX_NR_HVC_CONSOLES)
+ i = ++last_hvc + MAX_NR_HVC_CONSOLES;
+ }
hp->index = i;
- cons_ops[i] = ops;
- vtermnos[i] = vtermno;
+ if (i < MAX_NR_HVC_CONSOLES) {
+ cons_ops[i] = ops;
+ vtermnos[i] = vtermno;
+ }
list_add_tail(&(hp->next), &hvc_structs);
mutex_unlock(&hvc_structs_mutex);
From: Johannes Berg <[email protected]>
commit e5b72e3bc4763152e24bf4b8333bae21cc526c56 upstream.
Due to some hardware issues, queue 31 isn't usable on devices that have
32 queues (7000, 8000, 9000 families), which is correctly reflected in
the configuration and TX queue initialization.
However, the firmware API and queue allocation code assumes that there
are 32 queues, and if something actually attempts to use #31 this leads
to a NULL-pointer dereference since it's not allocated.
Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also
add some code to catch this earlier in the future, if the configuration
changes perhaps.
Cc: [email protected] # v4.9+
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/fw/api/txq.h | 6 +++---
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 5 +++++
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h
@@ -8,7 +8,7 @@
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -31,7 +31,7 @@
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -99,7 +99,7 @@ enum iwl_mvm_dqa_txq {
IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
- IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
+ IWL_MVM_DQA_MAX_DATA_QUEUE = 30,
};
enum iwl_mvm_tx_fifo {
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -722,6 +722,11 @@ static int iwl_mvm_find_free_queue(struc
lockdep_assert_held(&mvm->mutex);
+ if (WARN(maxq >= mvm->trans->trans_cfg->base_params->num_of_queues,
+ "max queue %d >= num_of_queues (%d)", maxq,
+ mvm->trans->trans_cfg->base_params->num_of_queues))
+ maxq = mvm->trans->trans_cfg->base_params->num_of_queues - 1;
+
/* This should not be hit with new TX path */
if (WARN_ON(iwl_mvm_has_new_tx_api(mvm)))
return -ENOSPC;
From: Tianjia Zhang <[email protected]>
commit 29cb79795e324a8b65e7891d76f8f6ca911ba440 upstream.
For the algorithm that does not match the bank, a positive
value EINVAL is returned here. I think this is a typo error.
It is necessary to return an error value.
Cc: [email protected] # 5.4.x
Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue")
Signed-off-by: Tianjia Zhang <[email protected]>
Reviewed-by: Roberto Sassu <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm-interface.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -322,7 +322,7 @@ int tpm_pcr_extend(struct tpm_chip *chip
for (i = 0; i < chip->nr_allocated_banks; i++) {
if (digests[i].alg_id != chip->allocated_banks[i].alg_id) {
- rc = EINVAL;
+ rc = -EINVAL;
goto out;
}
}
From: Lars-Peter Clausen <[email protected]>
commit 3b7f9dbb827ce8680b98490215e698b6079a9ec5 upstream.
The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware
does not have a FIFO, which means it generates an interrupt for each
conversion sequence. At one 1MSPS this creates an interrupt storm that
causes the system to soft-lock.
For this reason the driver limits the maximum samplerate to 150kSPS.
Currently this check is only done when setting a new samplerate. But it is
also possible that the initial samplerate configured in the FPGA bitstream
exceeds the limit.
In this case when starting to capture data without first changing the
samplerate the system can overload.
To prevent this check the currently configured samplerate in the probe
function and reduce it to the maximum if necessary.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 78 ++++++++++++++++++++++++++++---------
1 file changed, 60 insertions(+), 18 deletions(-)
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -102,6 +102,16 @@ static const unsigned int XADC_ZYNQ_UNMA
#define XADC_FLAGS_BUFFERED BIT(0)
+/*
+ * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
+ * not have a hardware FIFO. Which means an interrupt is generated for each
+ * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
+ * overloaded by the interrupts that it soft-lockups. For this reason the driver
+ * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
+ * but still responsive.
+ */
+#define XADC_MAX_SAMPLERATE 150000
+
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
@@ -834,11 +844,27 @@ static const struct iio_buffer_setup_ops
.postdisable = &xadc_postdisable,
};
+static int xadc_read_samplerate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ return xadc_get_dclk_rate(xadc) / div / 26;
+}
+
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
- unsigned int div;
uint16_t val16;
int ret;
@@ -891,41 +917,31 @@ static int xadc_read_raw(struct iio_dev
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
- if (ret)
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
return ret;
- div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
- if (div < 2)
- div = 2;
-
- *val = xadc_get_dclk_rate(xadc) / div / 26;
-
+ *val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
-static int xadc_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long info)
+static int xadc_write_samplerate(struct xadc *xadc, int val)
{
- struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
-
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
- if (val > 150000)
- val = 150000;
+ if (val > XADC_MAX_SAMPLERATE)
+ val = XADC_MAX_SAMPLERATE;
val *= 26;
@@ -938,7 +954,7 @@ static int xadc_write_raw(struct iio_dev
* limit.
*/
div = clk_rate / val;
- if (clk_rate / div / 26 > 150000)
+ if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
@@ -949,6 +965,17 @@ static int xadc_write_raw(struct iio_dev
div << XADC_CONF2_DIV_OFFSET);
}
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return xadc_write_samplerate(xadc, val);
+}
+
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -1236,6 +1263,21 @@ static int xadc_probe(struct platform_de
if (ret)
goto err_free_samplerate_trigger;
+ /*
+ * Make sure not to exceed the maximum samplerate since otherwise the
+ * resulting interrupt storm will soft-lock the system.
+ */
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ if (ret > XADC_MAX_SAMPLERATE) {
+ ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ }
+ }
+
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)
From: Kailang Yang <[email protected]>
commit 7fbdcd8301a84c09cebfa64f1317a6dafeec9188 upstream.
Enable new codec supported for ALC245.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -369,6 +369,7 @@ static void alc_fill_eapd_coef(struct hd
case 0x10ec0233:
case 0x10ec0235:
case 0x10ec0236:
+ case 0x10ec0245:
case 0x10ec0255:
case 0x10ec0256:
case 0x10ec0257:
@@ -8102,6 +8103,7 @@ static int patch_alc269(struct hda_codec
spec->gen.mixer_nid = 0;
break;
case 0x10ec0215:
+ case 0x10ec0245:
case 0x10ec0285:
case 0x10ec0289:
spec->codec_variant = ALC269_TYPE_ALC215;
@@ -9363,6 +9365,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0234, "ALC234", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0235, "ALC233", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0236, "ALC236", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0245, "ALC245", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0255, "ALC255", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0256, "ALC256", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0257, "ALC257", patch_alc269),
From: Longpeng <[email protected]>
commit 3c1d7e6ccb644d517a12f73a7ff200870926f865 upstream.
Our machine encountered a panic(addressing exception) after run for a
long time and the calltrace is:
RIP: hugetlb_fault+0x307/0xbe0
RSP: 0018:ffff9567fc27f808 EFLAGS: 00010286
RAX: e800c03ff1258d48 RBX: ffffd3bb003b69c0 RCX: e800c03ff1258d48
RDX: 17ff3fc00eda72b7 RSI: 00003ffffffff000 RDI: e800c03ff1258d48
RBP: ffff9567fc27f8c8 R08: e800c03ff1258d48 R09: 0000000000000080
R10: ffffaba0704c22a8 R11: 0000000000000001 R12: ffff95c87b4b60d8
R13: 00005fff00000000 R14: 0000000000000000 R15: ffff9567face8074
FS: 00007fe2d9ffb700(0000) GS:ffff956900e40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffd3bb003b69c0 CR3: 000000be67374000 CR4: 00000000003627e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
follow_hugetlb_page+0x175/0x540
__get_user_pages+0x2a0/0x7e0
__get_user_pages_unlocked+0x15d/0x210
__gfn_to_pfn_memslot+0x3c5/0x460 [kvm]
try_async_pf+0x6e/0x2a0 [kvm]
tdp_page_fault+0x151/0x2d0 [kvm]
...
kvm_arch_vcpu_ioctl_run+0x330/0x490 [kvm]
kvm_vcpu_ioctl+0x309/0x6d0 [kvm]
do_vfs_ioctl+0x3f0/0x540
SyS_ioctl+0xa1/0xc0
system_call_fastpath+0x22/0x27
For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it
may return a wrong 'pmdp' if there is a race. Please look at the
following code snippet:
...
pud = pud_offset(p4d, addr);
if (sz != PUD_SIZE && pud_none(*pud))
return NULL;
/* hugepage or swap? */
if (pud_huge(*pud) || !pud_present(*pud))
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
if (sz != PMD_SIZE && pmd_none(*pmd))
return NULL;
/* hugepage or swap? */
if (pmd_huge(*pmd) || !pmd_present(*pmd))
return (pte_t *)pmd;
...
The following sequence would trigger this bug:
- CPU0: sz = PUD_SIZE and *pud = 0 , continue
- CPU0: "pud_huge(*pud)" is false
- CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT)
- CPU0: "!pud_present(*pud)" is false, continue
- CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp
However, we want CPU0 to return NULL or pudp in this case.
We must make sure there is exactly one dereference of pud and pmd.
Signed-off-by: Longpeng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -5016,8 +5016,8 @@ pte_t *huge_pte_offset(struct mm_struct
{
pgd_t *pgd;
p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
+ pud_t *pud, pud_entry;
+ pmd_t *pmd, pmd_entry;
pgd = pgd_offset(mm, addr);
if (!pgd_present(*pgd))
@@ -5027,17 +5027,19 @@ pte_t *huge_pte_offset(struct mm_struct
return NULL;
pud = pud_offset(p4d, addr);
- if (sz != PUD_SIZE && pud_none(*pud))
+ pud_entry = READ_ONCE(*pud);
+ if (sz != PUD_SIZE && pud_none(pud_entry))
return NULL;
/* hugepage or swap? */
- if (pud_huge(*pud) || !pud_present(*pud))
+ if (pud_huge(pud_entry) || !pud_present(pud_entry))
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
- if (sz != PMD_SIZE && pmd_none(*pmd))
+ pmd_entry = READ_ONCE(*pmd);
+ if (sz != PMD_SIZE && pmd_none(pmd_entry))
return NULL;
/* hugepage or swap? */
- if (pmd_huge(*pmd) || !pmd_present(*pmd))
+ if (pmd_huge(pmd_entry) || !pmd_present(pmd_entry))
return (pte_t *)pmd;
return NULL;
From: Christian Borntraeger <[email protected]>
commit 316ec154810960052d4586b634156c54d0778f74 upstream.
A page table upgrade in a kernel section that uses secondary address
mode will mess up the kernel instructions as follows:
Consider the following scenario: two threads are sharing memory.
On CPU1 thread 1 does e.g. strnlen_user(). That gets to
old_fs = enable_sacf_uaccess();
len = strnlen_user_srst(src, size);
and
" la %2,0(%1)\n"
" la %3,0(%0,%1)\n"
" slgr %0,%0\n"
" sacf 256\n"
"0: srst %3,%2\n"
in strnlen_user_srst(). At that point we are in secondary space mode,
control register 1 points to kernel page table and instruction fetching
happens via c1, rather than usual c13. Interrupts are not disabled, for
obvious reasons.
On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table
from 3-level to e.g. 4-level one. We'd allocated new top-level table,
set it up and now we hit this:
notify = 1;
spin_unlock_bh(&mm->page_table_lock);
}
if (notify)
on_each_cpu(__crst_table_upgrade, mm, 0);
OK, we need to actually change over to use of new page table and we
need that to happen in all threads that are currently running. Which
happens to include the thread 1. IPI is delivered and we have
static void __crst_table_upgrade(void *arg)
{
struct mm_struct *mm = arg;
if (current->active_mm == mm)
set_user_asce(mm);
__tlb_flush_local();
}
run on CPU1. That does
static inline void set_user_asce(struct mm_struct *mm)
{
S390_lowcore.user_asce = mm->context.asce;
OK, user page table address updated...
__ctl_load(S390_lowcore.user_asce, 1, 1);
... and control register 1 set to it.
clear_cpu_flag(CIF_ASCE_PRIMARY);
}
IPI is run in home space mode, so it's fine - insns are fetched
using c13, which always points to kernel page table. But as soon
as we return from the interrupt, previous PSW is restored, putting
CPU1 back into secondary space mode, at which point we no longer
get the kernel instructions from the kernel mapping.
The fix is to only fixup the control registers that are currently in use
for user processes during the page table update. We must also disable
interrupts in enable_sacf_uaccess to synchronize the cr and
thread.mm_segment updates against the on_each-cpu.
Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode")
Cc: [email protected] # 4.15+
Reported-by: Al Viro <[email protected]>
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/lib/uaccess.c | 4 ++++
arch/s390/mm/pgalloc.c | 16 ++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -64,10 +64,13 @@ mm_segment_t enable_sacf_uaccess(void)
{
mm_segment_t old_fs;
unsigned long asce, cr;
+ unsigned long flags;
old_fs = current->thread.mm_segment;
if (old_fs & 1)
return old_fs;
+ /* protect against a concurrent page table upgrade */
+ local_irq_save(flags);
current->thread.mm_segment |= 1;
asce = S390_lowcore.kernel_asce;
if (likely(old_fs == USER_DS)) {
@@ -83,6 +86,7 @@ mm_segment_t enable_sacf_uaccess(void)
__ctl_load(asce, 7, 7);
set_cpu_flag(CIF_ASCE_SECONDARY);
}
+ local_irq_restore(flags);
return old_fs;
}
EXPORT_SYMBOL(enable_sacf_uaccess);
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -70,8 +70,20 @@ static void __crst_table_upgrade(void *a
{
struct mm_struct *mm = arg;
- if (current->active_mm == mm)
- set_user_asce(mm);
+ /* we must change all active ASCEs to avoid the creation of new TLBs */
+ if (current->active_mm == mm) {
+ S390_lowcore.user_asce = mm->context.asce;
+ if (current->thread.mm_segment == USER_DS) {
+ __ctl_load(S390_lowcore.user_asce, 1, 1);
+ /* Mark user-ASCE present in CR1 */
+ clear_cpu_flag(CIF_ASCE_PRIMARY);
+ }
+ if (current->thread.mm_segment == USER_DS_SACF) {
+ __ctl_load(S390_lowcore.user_asce, 7, 7);
+ /* enable_sacf_uaccess does all or nothing */
+ WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY));
+ }
+ }
__tlb_flush_local();
}
From: Ahmad Fatoum <[email protected]>
commit f1baca8896ae18e12c45552a4c4ae2086aa7e02c upstream.
512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
introduced an unintended linker error for i.MX6 configurations that have
ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE,
nor ARM_PSCI_FW are selected.
Fix this by having v7_cpu_resume() compiled only when cpu_resume() it
calls is available as well.
The C declaration for the function remains unguarded to avoid future code
inadvertently using a stub and introducing a regression to the bug the
original commit fixed.
Cc: <[email protected]>
Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
Reported-by: Clemens Gruber <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Tested-by: Roland Hieber <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-imx/Makefile | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -91,8 +91,10 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
From: Lucas Stach <[email protected]>
commit cf01699ee220c38099eb3e43ce3d10690c8b7060 upstream.
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Martin Kelly <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/vm/Makefile | 2 ++
1 file changed, 2 insertions(+)
--- a/tools/vm/Makefile
+++ b/tools/vm/Makefile
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm tools
#
+include ../scripts/Makefile.include
+
TARGETS=page-types slabinfo page_owner_sort
LIB_DIR = ../lib/api
From: Sudip Mukherjee <[email protected]>
commit db973a7289dad24e6c017dcedc6aee886579dc3a upstream.
If the core_pattern is set to "|" and any process segfaults then we get
a null pointer derefernce while trying to coredump. The call stack shows:
RIP: do_coredump+0x628/0x11c0
When the core_pattern has only "|" there is no use of trying the
coredump and we can check that while formating the corename and exit
with an error.
After this change I get:
format_corename failed
Aborting core
Fixes: 315c69261dd3 ("coredump: split pipe command whitespace before expanding template")
Reported-by: Matthew Ruffell <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Paul Wise <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Neil Horman <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/coredump.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -211,6 +211,8 @@ static int format_corename(struct core_n
return -ENOMEM;
(*argv)[(*argc)++] = 0;
++pat_ptr;
+ if (!(*pat_ptr))
+ return -ENOMEM;
}
/* Repeat as long as we have more pattern to process and more output
From: Michal Simek <[email protected]>
commit 72d68197281e2ad313960504d10b0c41ff87fd55 upstream.
This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade.
With setting up NR_PORTS to 16 to be able to use serial2 and higher
aliases and don't loose functionality which was intended by these changes.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 111 ++++---------------------------------
1 file changed, 13 insertions(+), 98 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -31,6 +31,7 @@
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
#define TX_TIMEOUT 500000
@@ -1389,90 +1390,6 @@ static const struct of_device_id cdns_ua
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
-/*
- * Maximum number of instances without alias IDs but if there is alias
- * which target "< MAX_UART_INSTANCES" range this ID can't be used.
- */
-#define MAX_UART_INSTANCES 32
-
-/* Stores static aliases list */
-static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
-static int alias_bitmap_initialized;
-
-/* Stores actual bitmap of allocated IDs with alias IDs together */
-static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
-/* Protect bitmap operations to have unique IDs */
-static DEFINE_MUTEX(bitmap_lock);
-
-static int cdns_get_id(struct platform_device *pdev)
-{
- int id, ret;
-
- mutex_lock(&bitmap_lock);
-
- /* Alias list is stable that's why get alias bitmap only once */
- if (!alias_bitmap_initialized) {
- ret = of_alias_get_alias_list(cdns_uart_of_match, "serial",
- alias_bitmap, MAX_UART_INSTANCES);
- if (ret && ret != -EOVERFLOW) {
- mutex_unlock(&bitmap_lock);
- return ret;
- }
-
- alias_bitmap_initialized++;
- }
-
- /* Make sure that alias ID is not taken by instance without alias */
- bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
-
- dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
- MAX_UART_INSTANCES, bitmap);
-
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0) {
- dev_warn(&pdev->dev,
- "No serial alias passed. Using the first free id\n");
-
- /*
- * Start with id 0 and check if there is no serial0 alias
- * which points to device which is compatible with this driver.
- * If alias exists then try next free position.
- */
- id = 0;
-
- for (;;) {
- dev_info(&pdev->dev, "Checking id %d\n", id);
- id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
-
- /* No free empty instance */
- if (id == MAX_UART_INSTANCES) {
- dev_err(&pdev->dev, "No free ID\n");
- mutex_unlock(&bitmap_lock);
- return -EINVAL;
- }
-
- dev_dbg(&pdev->dev, "The empty id is %d\n", id);
- /* Check if ID is empty */
- if (!test_and_set_bit(id, bitmap)) {
- /* Break the loop if bit is taken */
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation passed\n",
- id);
- break;
- }
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation failed\n", id);
- /* if taking bit fails then try next one */
- id++;
- }
- }
-
- mutex_unlock(&bitmap_lock);
-
- return id;
-}
-
/**
* cdns_uart_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
@@ -1506,17 +1423,21 @@ static int cdns_uart_probe(struct platfo
if (!cdns_uart_uart_driver)
return -ENOMEM;
- cdns_uart_data->id = cdns_get_id(pdev);
+ /* Look for a serialN alias */
+ cdns_uart_data->id = of_alias_get_id(pdev->dev.of_node, "serial");
if (cdns_uart_data->id < 0)
- return cdns_uart_data->id;
+ cdns_uart_data->id = 0;
+
+ if (cdns_uart_data->id >= CDNS_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+ return -ENODEV;
+ }
/* There is a need to use unique driver name */
driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
CDNS_UART_NAME, cdns_uart_data->id);
- if (!driver_name) {
- rc = -ENOMEM;
- goto err_out_id;
- }
+ if (!driver_name)
+ return -ENOMEM;
cdns_uart_uart_driver->owner = THIS_MODULE;
cdns_uart_uart_driver->driver_name = driver_name;
@@ -1545,7 +1466,7 @@ static int cdns_uart_probe(struct platfo
rc = uart_register_driver(cdns_uart_uart_driver);
if (rc < 0) {
dev_err(&pdev->dev, "Failed to register driver\n");
- goto err_out_id;
+ return rc;
}
cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
@@ -1695,10 +1616,7 @@ err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-err_out_id:
- mutex_lock(&bitmap_lock);
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
+
return rc;
}
@@ -1721,9 +1639,6 @@ static int cdns_uart_remove(struct platf
#endif
rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
port->mapbase = 0;
- mutex_lock(&bitmap_lock);
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
clk_disable_unprepare(cdns_uart_data->uartclk);
clk_disable_unprepare(cdns_uart_data->pclk);
pm_runtime_disable(&pdev->dev);
From: Luis Mendes <[email protected]>
commit 9195d762042b0e5e4ded63606b4b30a93cba4400 upstream.
Fix incongruency in handling of sysfs entries creation.
This issue could cause invalid memory accesses, by not properly
detecting the end of the sysfs attributes array.
Fixes: 84c45d5f3bf1 ("staging: gasket: Replace macro __ATTR with __ATTR_NULL")
Signed-off-by: Luis Mendes <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/gasket/gasket_sysfs.c | 3 +--
drivers/staging/gasket/gasket_sysfs.h | 4 ----
2 files changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/staging/gasket/gasket_sysfs.c
+++ b/drivers/staging/gasket/gasket_sysfs.c
@@ -228,8 +228,7 @@ int gasket_sysfs_create_entries(struct d
}
mutex_lock(&mapping->mutex);
- for (i = 0; strcmp(attrs[i].attr.attr.name, GASKET_ARRAY_END_MARKER);
- i++) {
+ for (i = 0; attrs[i].attr.attr.name != NULL; i++) {
if (mapping->attribute_count == GASKET_SYSFS_MAX_NODES) {
dev_err(device,
"Maximum number of sysfs nodes reached for device\n");
--- a/drivers/staging/gasket/gasket_sysfs.h
+++ b/drivers/staging/gasket/gasket_sysfs.h
@@ -30,10 +30,6 @@
*/
#define GASKET_SYSFS_MAX_NODES 196
-/* End markers for sysfs struct arrays. */
-#define GASKET_ARRAY_END_TOKEN GASKET_RESERVED_ARRAY_END
-#define GASKET_ARRAY_END_MARKER __stringify(GASKET_ARRAY_END_TOKEN)
-
/*
* Terminator struct for a gasket_sysfs_attr array. Must be at the end of
* all gasket_sysfs_attribute arrays.
From: Mathias Nyman <[email protected]>
commit 93ceaa808e8defc67ebca1396e2f42f812a2efc0 upstream.
If a class driver cancels its only URB then the endpoint ring buffer will
appear empty to the xhci driver. xHC hardware may still process cached
TRBs, and complete with a STALL, halting the endpoint.
This halted endpoint was not handled correctly by xhci driver as events on
empty rings were all assumed to be spurious events.
xhci driver refused to restart the ring with EP_HALTED flag set, so class
driver was never informed the endpoint halted even if it queued new URBs.
The host side of the endpoint needs to be reset, and dequeue pointer should
be moved in order to clear the cached TRBs and resetart the endpoint.
Small adjustments in finding the new dequeue pointer are needed to support
the case of stall on an empty ring and unknown current TD.
Cc: <[email protected]>
cc: Jeremy Compostella <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 30 +++++++++++++++++++++++++++++-
drivers/usb/host/xhci.c | 14 +++++++-------
drivers/usb/host/xhci.h | 5 +++--
3 files changed, 39 insertions(+), 10 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -541,6 +541,23 @@ void xhci_find_new_dequeue_state(struct
stream_id);
return;
}
+ /*
+ * A cancelled TD can complete with a stall if HW cached the trb.
+ * In this case driver can't find cur_td, but if the ring is empty we
+ * can move the dequeue pointer to the current enqueue position.
+ */
+ if (!cur_td) {
+ if (list_empty(&ep_ring->td_list)) {
+ state->new_deq_seg = ep_ring->enq_seg;
+ state->new_deq_ptr = ep_ring->enqueue;
+ state->new_cycle_state = ep_ring->cycle_state;
+ goto done;
+ } else {
+ xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+ return;
+ }
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
@@ -586,6 +603,7 @@ void xhci_find_new_dequeue_state(struct
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
+done:
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
@@ -1848,7 +1866,8 @@ static void xhci_cleanup_halted_endpoint
if (reset_type == EP_HARD_RESET) {
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
- xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
+ xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+ td);
xhci_clear_hub_tt_buffer(xhci, td, ep);
}
xhci_ring_cmd_db(xhci);
@@ -2527,6 +2546,15 @@ static int handle_tx_event(struct xhci_h
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
+ if (trb_comp_code == COMP_STALL_ERROR ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ xhci_cleanup_halted_endpoint(xhci, slot_id,
+ ep_index,
+ ep_ring->stream_id,
+ NULL,
+ EP_HARD_RESET);
+ }
goto cleanup;
}
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3031,19 +3031,19 @@ static void xhci_setup_input_ctx_for_qui
added_ctxs, added_ctxs);
}
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td)
{
struct xhci_dequeue_state deq_state;
- struct usb_device *udev = td->urb->dev;
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Cleaning up stalled endpoint ring");
/* We need to move the HW's dequeue pointer past this TD,
* or it will attempt to resend it on the next doorbell ring.
*/
- xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, stream_id, td, &deq_state);
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+ &deq_state);
if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
return;
@@ -3054,7 +3054,7 @@ void xhci_cleanup_stalled_ring(struct xh
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Queueing new dequeue state");
- xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+ xhci_queue_new_dequeue_state(xhci, slot_id,
ep_index, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
@@ -3065,7 +3065,7 @@ void xhci_cleanup_stalled_ring(struct xh
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Setting up input context for "
"configure endpoint command");
- xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ xhci_setup_input_ctx_for_quirk(xhci, slot_id,
ep_index, &deq_state);
}
}
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2116,8 +2116,9 @@ void xhci_find_new_dequeue_state(struct
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
void xhci_handle_command_timeout(struct work_struct *work);
From: Oliver Neukum <[email protected]>
commit f6cc6093a729ede1ff5658b493237c42b82ba107 upstream.
A SCSI error handler and block runtime PM must not allocate
memory with GFP_KERNEL. Furthermore they must not wait for
tasks allocating memory with GFP_KERNEL.
That means that they cannot share a workqueue with arbitrary tasks.
Fix this for UAS using a private workqueue.
Signed-off-by: Oliver Neukum <[email protected]>
Fixes: f9dc024a2da1f ("uas: pre_reset and suspend: Fix a few races")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/uas.c | 43 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 3 deletions(-)
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -81,6 +81,19 @@ static void uas_free_streams(struct uas_
static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
int status);
+/*
+ * This driver needs its own workqueue, as we need to control memory allocation.
+ *
+ * In the course of error handling and power management uas_wait_for_pending_cmnds()
+ * needs to flush pending work items. In these contexts we cannot allocate memory
+ * by doing block IO as we would deadlock. For the same reason we cannot wait
+ * for anything allocating memory not heeding these constraints.
+ *
+ * So we have to control all work items that can be on the workqueue we flush.
+ * Hence we cannot share a queue and need our own.
+ */
+static struct workqueue_struct *workqueue;
+
static void uas_do_work(struct work_struct *work)
{
struct uas_dev_info *devinfo =
@@ -109,7 +122,7 @@ static void uas_do_work(struct work_stru
if (!err)
cmdinfo->state &= ~IS_IN_WORK_LIST;
else
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
out:
spin_unlock_irqrestore(&devinfo->lock, flags);
@@ -134,7 +147,7 @@ static void uas_add_work(struct uas_cmd_
lockdep_assert_held(&devinfo->lock);
cmdinfo->state |= IS_IN_WORK_LIST;
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
@@ -1230,7 +1243,31 @@ static struct usb_driver uas_driver = {
.id_table = uas_usb_ids,
};
-module_usb_driver(uas_driver);
+static int __init uas_init(void)
+{
+ int rv;
+
+ workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
+ if (!workqueue)
+ return -ENOMEM;
+
+ rv = usb_register(&uas_driver);
+ if (rv) {
+ destroy_workqueue(workqueue);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void __exit uas_exit(void)
+{
+ usb_deregister(&uas_driver);
+ destroy_workqueue(workqueue);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(USB_STORAGE);
From: Nicolas Pitre <[email protected]>
commit 2717769e204e83e65b8819c5e2ef3e5b6639b270 upstream.
The code in vc_do_resize() bounds the memory allocation size to avoid
exceeding MAX_ORDER down the kzalloc() call chain and generating a
runtime warning triggerable from user space. However, not only is it
unwise to use a literal value here, but MAX_ORDER may also be
configurable based on CONFIG_FORCE_MAX_ZONEORDER.
Let's use KMALLOC_MAX_SIZE instead.
Note that prior commit bb1107f7c605 ("mm, slab: make sure that
KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value
could not be relied upon.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]> # v4.10+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1206,7 +1206,7 @@ static int vc_do_resize(struct tty_struc
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > (4 << 20))
+ if (new_screen_size > KMALLOC_MAX_SIZE)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
From: Mathias Nyman <[email protected]>
commit 8f97250c21f0cf36434bf5b7ddf4377406534cd1 upstream.
The default control endpoint ep0 can return a STALL indicating the
device does not support the control transfer requests. This is called
a protocol stall and does not halt the endpoint.
xHC behaves a bit different. Its internal endpoint state will always
be halted on any stall, even if the device side of the endpiont is not
halted. So we do need to issue the reset endpoint command to clear the
xHC host intenal endpoint halt state, but should not request the HS hub
to clear the TT buffer unless device side of endpoint is halted.
Clearing the hub TT buffer at protocol stall caused ep0 to become
unresponsive for some FS/LS devices behind HS hubs, and class drivers
failed to set the interface due to timeout:
usb 1-2.1: 1:1: usb_set_interface failed (-110)
Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer")
Cc: <[email protected]> # v5.3
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1868,7 +1868,6 @@ static void xhci_cleanup_halted_endpoint
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
td);
- xhci_clear_hub_tt_buffer(xhci, td, ep);
}
xhci_ring_cmd_db(xhci);
}
@@ -1989,11 +1988,18 @@ static int finish_td(struct xhci_hcd *xh
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*
+ * xhci internal endpoint state will go to a "halt" state for
+ * any stall, including default control pipe protocol stall.
+ * To clear the host side halt we need to issue a reset endpoint
+ * command, followed by a set dequeue command to move past the
+ * TD.
+ * Class drivers clear the device side halt from a functional
+ * stall later. Hub TT buffer should only be cleared for FS/LS
+ * devices behind HS hubs for functional stalls.
*/
+ if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+ xhci_clear_hub_tt_buffer(xhci, td, ep);
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, EP_HARD_RESET);
} else {
From: Michal Simek <[email protected]>
commit 2e01911b7cf7aa07a304a809eca1b11a4bd35859 upstream.
This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1550,6 +1550,7 @@ static int cdns_uart_probe(struct platfo
goto err_out_id;
}
+ uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
/*
@@ -1679,7 +1680,6 @@ static int cdns_uart_probe(struct platfo
console_port = NULL;
#endif
- uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
return 0;
@@ -1741,12 +1741,6 @@ static int cdns_uart_remove(struct platf
console_port = NULL;
#endif
- /* If this is last instance major number should be initialized */
- mutex_lock(&bitmap_lock);
- if (bitmap_empty(bitmap, MAX_UART_INSTANCES))
- uartps_major = 0;
- mutex_unlock(&bitmap_lock);
-
uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
From: Gyeongtaek Lee <[email protected]>
commit ebf1474745b4373fdde0fcf32d9d1f369b50b212 upstream.
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-dapm.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -423,7 +423,7 @@ static int dapm_kcontrol_data_alloc(stru
memset(&template, 0, sizeof(template));
template.reg = e->reg;
- template.mask = e->mask << e->shift_l;
+ template.mask = e->mask;
template.shift = e->shift_l;
template.off_val = snd_soc_enum_item_to_val(e, 0);
template.on_val = template.off_val;
@@ -546,8 +546,22 @@ static bool dapm_kcontrol_set_value(cons
if (data->value == value)
return false;
- if (data->widget)
- data->widget->on_val = value;
+ if (data->widget) {
+ switch (dapm_kcontrol_get_wlist(kcontrol)->widgets[0]->id) {
+ case snd_soc_dapm_switch:
+ case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
+ data->widget->on_val = value & data->widget->mask;
+ break;
+ case snd_soc_dapm_demux:
+ case snd_soc_dapm_mux:
+ data->widget->on_val = value >> data->widget->shift;
+ break;
+ default:
+ data->widget->on_val = value;
+ break;
+ }
+ }
data->value = value;
From: Muchun Song <[email protected]>
commit 56df70a63ed5d989c1d36deee94cae14342be6e9 upstream.
find_mergeable_vma() can return NULL. In this case, it leads to a crash
when we access vm_mm(its offset is 0x40) later in write_protect_page.
And this case did happen on our server. The following call trace is
captured in kernel 4.19 with the following patch applied and KSM zero
page enabled on our server.
commit e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring")
So add a vma check to fix it.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
Oops: 0000 [#1] SMP NOPTI
CPU: 9 PID: 510 Comm: ksmd Kdump: loaded Tainted: G OE 4.19.36.bsk.9-amd64 #4.19.36.bsk.9
RIP: try_to_merge_one_page+0xc7/0x760
Code: 24 58 65 48 33 34 25 28 00 00 00 89 e8 0f 85 a3 06 00 00 48 83 c4
60 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b 46 08 a8 01 75 b8 <49>
8b 44 24 40 4c 8d 7c 24 20 b9 07 00 00 00 4c 89 e6 4c 89 ff 48
RSP: 0018:ffffadbdd9fffdb0 EFLAGS: 00010246
RAX: ffffda83ffd4be08 RBX: ffffda83ffd4be40 RCX: 0000002c6e800000
RDX: 0000000000000000 RSI: ffffda83ffd4be40 RDI: 0000000000000000
RBP: ffffa11939f02ec0 R08: 0000000094e1a447 R09: 00000000abe76577
R10: 0000000000000962 R11: 0000000000004e6a R12: 0000000000000000
R13: ffffda83b1e06380 R14: ffffa18f31f072c0 R15: ffffda83ffd4be40
FS: 0000000000000000(0000) GS:ffffa0da43b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000040 CR3: 0000002c77c0a003 CR4: 00000000007626e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
ksm_scan_thread+0x115e/0x1960
kthread+0xf5/0x130
ret_from_fork+0x1f/0x30
[[email protected]: if the vma is out of date, just exit]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: add the conventional braces, replace /** with /*]
Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring")
Co-developed-by: Xiongchun Duan <[email protected]>
Signed-off-by: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Kirill Tkhai <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/ksm.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -2112,8 +2112,16 @@ static void cmp_and_merge_page(struct pa
down_read(&mm->mmap_sem);
vma = find_mergeable_vma(mm, rmap_item->address);
- err = try_to_merge_one_page(vma, page,
- ZERO_PAGE(rmap_item->address));
+ if (vma) {
+ err = try_to_merge_one_page(vma, page,
+ ZERO_PAGE(rmap_item->address));
+ } else {
+ /*
+ * If the vma is out of date, we do not need to
+ * continue.
+ */
+ err = 0;
+ }
up_read(&mm->mmap_sem);
/*
* In case of failure, the page was not really empty, so we
From: David Ahern <[email protected]>
[ Upstream commit a53c102872ad6e34e1518e25899dc9498c27f8b1 ]
When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vrf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -188,8 +188,8 @@ static netdev_tx_t vrf_process_v6_outbou
fl6.flowi6_proto = iph->nexthdr;
fl6.flowi6_flags = FLOWI_FLAG_SKIP_NH_OIF;
- dst = ip6_route_output(net, NULL, &fl6);
- if (dst == dst_null)
+ dst = ip6_dst_lookup_flow(net, NULL, &fl6, NULL);
+ if (IS_ERR(dst) || dst == dst_null)
goto err;
skb_dst_drop(skb);
From: Florian Fainelli <[email protected]>
[ Upstream commit c2e77a18a7ed65eb48f6e389b6a59a0fd753646a ]
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes,
which means that when we read/wrote from/to ARL bin index 0, we were
actually accessing the ARLA_RWCTRL register.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/b53/b53_regs.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -304,7 +304,7 @@
*
* BCM5325 and BCM5365 share most definitions below
*/
-#define B53_ARLTBL_MAC_VID_ENTRY(n) (0x10 * (n))
+#define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10)
#define ARLTBL_MAC_MASK 0xffffffffffffULL
#define ARLTBL_VID_S 48
#define ARLTBL_VID_MASK_25 0xff
@@ -316,7 +316,7 @@
#define ARLTBL_VALID_25 BIT(63)
/* ARL Table Data Entry N Registers (32 bit) */
-#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x08)
+#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18)
#define ARLTBL_DATA_PORT_ID_MASK 0x1ff
#define ARLTBL_TC(tc) ((3 & tc) << 11)
#define ARLTBL_AGE BIT(14)
From: Lary Gibaud <[email protected]>
commit e450e07c14abae563ad13b064cbce9fdccc6bc8d upstream.
Indeed, relying on addr being not 0 cannot work because some device have
their register to set odr at address 0. As a matter of fact, if the odr
can be set, then there is a mask.
Sensors with ODR register at address 0 are: lsm303dlh, lsm303dlhc, lsm303dlm
Fixes: 7d245172675a ("iio: common: st_sensors: check odr address value in st_sensors_set_odr()")
Signed-off-by: Lary Gibaud <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/common/st_sensors/st_sensors_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -80,7 +80,7 @@ int st_sensors_set_odr(struct iio_dev *i
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->odr.addr)
+ if (!sdata->sensor_settings->odr.mask)
return 0;
err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
From: Takashi Iwai <[email protected]>
[ Upstream commit fef66ae73a611e84c8b4b74ff6f805ec5f113477 ]
It turned out that ALC1220-VB USB-audio device gives the interrupt
event to some PCM terminals while those don't allow the connector
state request but only the actual I/O terminals return the request.
The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack
controls for PCM terminals") excluded those phantom terminals, so
those events are ignored, too.
My first thought was that this could be easily deduced from the
associated terminals, but some of them have even no associate terminal
ID, hence it's not too trivial to figure out.
Since the number of such terminals are small and limited, this patch
implements another quirk table for the simple mapping of the
connectors. It's not really scalable, but let's hope that there will
be not many such funky devices in future.
Fixes: 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/mixer.c | 25 +++++++++++++++++++++++++
sound/usb/mixer.h | 10 ++++++++++
sound/usb/mixer_maps.c | 13 +++++++++++++
3 files changed, 48 insertions(+)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index f9586a6ea05b6..583edacc9fe8e 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -3096,6 +3096,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
if (map->id == state.chip->usb_id) {
state.map = map->map;
state.selector_map = map->selector_map;
+ mixer->connector_map = map->connector_map;
mixer->ignore_ctl_error |= map->ignore_ctl_error;
break;
}
@@ -3177,10 +3178,32 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
return 0;
}
+static int delegate_notify(struct usb_mixer_interface *mixer, int unitid,
+ u8 *control, u8 *channel)
+{
+ const struct usbmix_connector_map *map = mixer->connector_map;
+
+ if (!map)
+ return unitid;
+
+ for (; map->id; map++) {
+ if (map->id == unitid) {
+ if (control && map->control)
+ *control = map->control;
+ if (channel && map->channel)
+ *channel = map->channel;
+ return map->delegated_id;
+ }
+ }
+ return unitid;
+}
+
void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid)
{
struct usb_mixer_elem_list *list;
+ unitid = delegate_notify(mixer, unitid, NULL, NULL);
+
for_each_mixer_elem(list, mixer, unitid) {
struct usb_mixer_elem_info *info =
mixer_elem_list_to_info(list);
@@ -3250,6 +3273,8 @@ static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer,
return;
}
+ unitid = delegate_notify(mixer, unitid, &control, &channel);
+
for_each_mixer_elem(list, mixer, unitid)
count++;
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 37e1b234c802f..8e0fb7fdf1a00 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -6,6 +6,13 @@
struct media_mixer_ctl;
+struct usbmix_connector_map {
+ u8 id;
+ u8 delegated_id;
+ u8 control;
+ u8 channel;
+};
+
struct usb_mixer_interface {
struct snd_usb_audio *chip;
struct usb_host_interface *hostif;
@@ -18,6 +25,9 @@ struct usb_mixer_interface {
/* the usb audio specification version this interface complies to */
int protocol;
+ /* optional connector delegation map */
+ const struct usbmix_connector_map *connector_map;
+
/* Sound Blaster remote control stuff */
const struct rc_config *rc_cfg;
u32 rc_code;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 28eec0e0aa5e4..39d6c6fa5e337 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -27,6 +27,7 @@ struct usbmix_ctl_map {
u32 id;
const struct usbmix_name_map *map;
const struct usbmix_selector_map *selector_map;
+ const struct usbmix_connector_map *connector_map;
int ignore_ctl_error;
};
@@ -377,6 +378,15 @@ static const struct usbmix_name_map trx40_mobo_map[] = {
{}
};
+static const struct usbmix_connector_map trx40_mobo_connector_map[] = {
+ { 10, 16 }, /* (Back) Speaker */
+ { 11, 17 }, /* Front Headphone */
+ { 13, 7 }, /* Line */
+ { 14, 8 }, /* Mic */
+ { 15, 9 }, /* Front Mic */
+ {}
+};
+
/*
* Control map entries
*/
@@ -499,6 +509,7 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
{ /* Gigabyte TRX40 Aorus Pro WiFi */
.id = USB_ID(0x0414, 0xa002),
.map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* ASUS ROG Zenith II */
.id = USB_ID(0x0b05, 0x1916),
@@ -511,10 +522,12 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
{ /* MSI TRX40 Creator */
.id = USB_ID(0x0db0, 0x0d64),
.map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* MSI TRX40 */
.id = USB_ID(0x0db0, 0x543d),
.map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ 0 } /* terminator */
};
--
2.20.1
From: David Ahern <[email protected]>
[ Upstream commit 16b9db1ce34ff00d6c18e82825125cfef0cdfb13 ]
To avoid a loop with qdiscs and xfrms, check if the skb has already gone
through the qdisc attached to the VRF device and then to the xfrm layer.
If so, no need for a second redirect.
Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Reported-by: Trev Larock <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vrf.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -474,7 +474,8 @@ static struct sk_buff *vrf_ip6_out(struc
if (rt6_need_strict(&ipv6_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED)
return vrf_ip6_out_direct(vrf_dev, sk, skb);
return vrf_ip6_out_redirect(vrf_dev, skb);
@@ -686,7 +687,8 @@ static struct sk_buff *vrf_ip_out(struct
ipv4_is_lbcast(ip_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
return vrf_ip_out_direct(vrf_dev, sk, skb);
return vrf_ip_out_redirect(vrf_dev, skb);
From: Vishal Kulkarni <[email protected]>
[ Upstream commit ce222748078592afb51b810dc154531aeba4f512 ]
In the absence of MC1, the size calculation function
cudbg_mem_region_size() was returing wrong MC size and
resulted in adapter crash. This patch adds new argument
to cudbg_mem_region_size() which will have actual size
and returns error to caller in the absence of MC1.
Fixes: a1c69520f785 ("cxgb4: collect MC memory dump")
Signed-off-by: Vishal Kulkarni <[email protected]>"
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 27 ++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
@@ -1054,9 +1054,9 @@ static void cudbg_t4_fwcache(struct cudb
}
}
-static unsigned long cudbg_mem_region_size(struct cudbg_init *pdbg_init,
- struct cudbg_error *cudbg_err,
- u8 mem_type)
+static int cudbg_mem_region_size(struct cudbg_init *pdbg_init,
+ struct cudbg_error *cudbg_err,
+ u8 mem_type, unsigned long *region_size)
{
struct adapter *padap = pdbg_init->adap;
struct cudbg_meminfo mem_info;
@@ -1065,15 +1065,23 @@ static unsigned long cudbg_mem_region_si
memset(&mem_info, 0, sizeof(struct cudbg_meminfo));
rc = cudbg_fill_meminfo(padap, &mem_info);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
cudbg_t4_fwcache(pdbg_init, cudbg_err);
rc = cudbg_meminfo_get_mem_index(padap, &mem_info, mem_type, &mc_idx);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
+
+ if (region_size)
+ *region_size = mem_info.avail[mc_idx].limit -
+ mem_info.avail[mc_idx].base;
- return mem_info.avail[mc_idx].limit - mem_info.avail[mc_idx].base;
+ return 0;
}
static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
@@ -1081,7 +1089,12 @@ static int cudbg_collect_mem_region(stru
struct cudbg_error *cudbg_err,
u8 mem_type)
{
- unsigned long size = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type);
+ unsigned long size = 0;
+ int rc;
+
+ rc = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type, &size);
+ if (rc)
+ return rc;
return cudbg_read_fw_mem(pdbg_init, dbg_buff, mem_type, size,
cudbg_err);
From: Heiner Kallweit <[email protected]>
[ Upstream commit 35efea32b26f9aacc99bf07e0d2cdfba2028b099 ]
Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset. Change this by
adding a clkpm_disable field similar to aspm_disable.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pcie/aspm.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 32c34330e5a67..5a1bbf2cb7e98 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -64,6 +64,7 @@ struct pcie_link_state {
u32 clkpm_capable:1; /* Clock PM capable? */
u32 clkpm_enabled:1; /* Current Clock PM state */
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
+ u32 clkpm_disable:1; /* Clock PM disabled */
/* Exit latencies */
struct aspm_latency latency_up; /* Upstream direction exit latency */
@@ -161,8 +162,11 @@ static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
{
- /* Don't enable Clock PM if the link is not Clock PM capable */
- if (!link->clkpm_capable)
+ /*
+ * Don't enable Clock PM if the link is not Clock PM capable
+ * or Clock PM is disabled
+ */
+ if (!link->clkpm_capable || link->clkpm_disable)
enable = 0;
/* Need nothing if the specified equals to current state */
if (link->clkpm_enabled == enable)
@@ -192,7 +196,8 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
}
link->clkpm_enabled = enabled;
link->clkpm_default = enabled;
- link->clkpm_capable = (blacklist) ? 0 : capable;
+ link->clkpm_capable = capable;
+ link->clkpm_disable = blacklist ? 1 : 0;
}
static bool pcie_retrain_link(struct pcie_link_state *link)
@@ -1097,10 +1102,9 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
link->aspm_disable |= ASPM_STATE_L1;
pcie_config_aspm_link(link, policy_to_aspm_state(link));
- if (state & PCIE_LINK_STATE_CLKPM) {
- link->clkpm_capable = 0;
- pcie_set_clkpm(link, 0);
- }
+ if (state & PCIE_LINK_STATE_CLKPM)
+ link->clkpm_disable = 1;
+ pcie_set_clkpm(link, policy_to_clkpm_state(link));
mutex_unlock(&aspm_lock);
if (sem)
up_read(&pci_bus_sem);
--
2.20.1
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit bd019427bf3623ee3c7d2845cf921bbf4c14846c ]
Fetching PTP sync information from mailbox is slow and can take
up to 10 milliseconds. Reduce this unnecessary delay by directly
reading the information from the corresponding registers.
Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Manoj Malviya <[email protected]>
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 27 +++++--------------------
drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 3 ++
2 files changed, 9 insertions(+), 21 deletions(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
@@ -311,32 +311,17 @@ static int cxgb4_ptp_adjtime(struct ptp_
*/
static int cxgb4_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
- struct adapter *adapter = (struct adapter *)container_of(ptp,
- struct adapter, ptp_clock_info);
- struct fw_ptp_cmd c;
+ struct adapter *adapter = container_of(ptp, struct adapter,
+ ptp_clock_info);
u64 ns;
- int err;
- memset(&c, 0, sizeof(c));
- c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_READ_F |
- FW_PTP_CMD_PORTID_V(0));
- c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
- c.u.ts.sc = FW_PTP_SC_GET_TIME;
-
- err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), &c);
- if (err < 0) {
- dev_err(adapter->pdev_dev,
- "PTP: %s error %d\n", __func__, -err);
- return err;
- }
+ ns = t4_read_reg(adapter, T5_PORT_REG(0, MAC_PORT_PTP_SUM_LO_A));
+ ns |= (u64)t4_read_reg(adapter,
+ T5_PORT_REG(0, MAC_PORT_PTP_SUM_HI_A)) << 32;
/* convert to timespec*/
- ns = be64_to_cpu(c.u.ts.tm);
*ts = ns_to_timespec64(ns);
-
- return err;
+ return 0;
}
/**
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -1900,6 +1900,9 @@
#define MAC_PORT_CFG2_A 0x818
+#define MAC_PORT_PTP_SUM_LO_A 0x990
+#define MAC_PORT_PTP_SUM_HI_A 0x994
+
#define MPS_CMN_CTL_A 0x9000
#define COUNTPAUSEMCRX_S 5
From: John Haxby <[email protected]>
[ Upstream commit 82c9ae440857840c56e05d4fb1427ee032531346 ]
Commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a
problem found by syzbot an unfortunate logic error meant that it
also broke IPV6_ADDRFORM.
Rearrange the checks so that the earlier test is just one of the series
of checks made before moving the socket from IPv6 to IPv4.
Fixes: b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation")
Signed-off-by: John Haxby <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ipv6_sockglue.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -183,15 +183,14 @@ static int do_ipv6_setsockopt(struct soc
retv = -EBUSY;
break;
}
- } else if (sk->sk_protocol == IPPROTO_TCP) {
- if (sk->sk_prot != &tcpv6_prot) {
- retv = -EBUSY;
- break;
- }
- break;
- } else {
+ }
+ if (sk->sk_protocol == IPPROTO_TCP &&
+ sk->sk_prot != &tcpv6_prot) {
+ retv = -EBUSY;
break;
}
+ if (sk->sk_protocol != IPPROTO_TCP)
+ break;
if (sk->sk_state != TCP_ESTABLISHED) {
retv = -ENOTCONN;
break;
From: Florian Fainelli <[email protected]>
[ Upstream commit eab167f4851a19c514469dfa81147f77e17b5b20 ]
When support for the MDB entries was added, the valid bit was correctly
changed to be assigned depending on the remaining port bitmask, that is,
if there were no more ports added to the entry's port bitmask, the entry
now becomes invalid. There was another assignment a few lines below that
would override this which would invalidate entries even when there were
still multiple ports left in the MDB entry.
Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1515,7 +1515,6 @@ static int b53_arl_op(struct b53_device
memset(&ent, 0, sizeof(ent));
ent.port = port;
- ent.is_valid = is_valid;
ent.vid = vid;
ent.is_static = true;
memcpy(ent.mac, addr, ETH_ALEN);
From: Taehee Yoo <[email protected]>
[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ]
When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
genl_lock(); by genl_rcv_msc()
rtnl_lock(); by team_nl_cmd_options_set()
mutex_lock(&team->lock); by team_nl_team_get()
Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.
The problem secenario.
CPU0 CPU1
team_mode_get
request_module()
modprobe -r team_mode_roundrobin
team <--(B)
modprobe team <--(A)
team_mode_roundrobin
By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.
By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.
Test commands:
while :
do
teamd -d &
killall teamd &
modprobe -rv team_mode_roundrobin &
done
The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Taehee Yoo <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/team/team.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -468,6 +468,9 @@ static const struct team_mode *team_mode
struct team_mode_item *mitem;
const struct team_mode *mode = NULL;
+ if (!try_module_get(THIS_MODULE))
+ return NULL;
+
spin_lock(&mode_list_lock);
mitem = __find_mode(kind);
if (!mitem) {
@@ -483,6 +486,7 @@ static const struct team_mode *team_mode
}
spin_unlock(&mode_list_lock);
+ module_put(THIS_MODULE);
return mode;
}
From: Murthy Bhat <[email protected]>
[ Upstream commit b969261134c1b990b96ea98fe5e0fcf8ec937c04 ]
Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.
Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhilda
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Reviewed-by: Kevin Barnett <[email protected]>
Signed-off-by: Murthy Bhat <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/smartpqi/smartpqi_sas_transport.c b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
index 6776dfc1d317c..b7e28b9f8589f 100644
--- a/drivers/scsi/smartpqi/smartpqi_sas_transport.c
+++ b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
@@ -45,9 +45,9 @@ static void pqi_free_sas_phy(struct pqi_sas_phy *pqi_sas_phy)
struct sas_phy *phy = pqi_sas_phy->phy;
sas_port_delete_phy(pqi_sas_phy->parent_port->port, phy);
- sas_phy_free(phy);
if (pqi_sas_phy->added_to_port)
list_del(&pqi_sas_phy->phy_list_entry);
+ sas_phy_delete(phy);
kfree(pqi_sas_phy);
}
--
2.20.1
From: Halil Pasic <[email protected]>
[ Upstream commit 3d973b2e9a625996ee997c7303cd793b9d197c65 ]
Let's change the mapping between virtqueue_add errors to BLK_STS
statuses, so that -ENOSPC, which indicates virtqueue full is still
mapped to BLK_STS_DEV_RESOURCE, but -ENOMEM which indicates non-device
specific resource outage is mapped to BLK_STS_RESOURCE.
Signed-off-by: Halil Pasic <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/virtio_blk.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index c2ed3e9128e3a..a55383b139df9 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -345,9 +345,14 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
if (err == -ENOSPC)
blk_mq_stop_hw_queue(hctx);
spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
- if (err == -ENOMEM || err == -ENOSPC)
+ switch (err) {
+ case -ENOSPC:
return BLK_STS_DEV_RESOURCE;
- return BLK_STS_IOERR;
+ case -ENOMEM:
+ return BLK_STS_RESOURCE;
+ default:
+ return BLK_STS_IOERR;
+ }
}
if (bd->last && virtqueue_kick_prepare(vblk->vqs[qid].vq))
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit d5a3c7a4536e1329a758e14340efd0e65252bd3d ]
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.
Fixes: 99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-renesas-tpu.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index 4a855a21b782d..8032acc84161a 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -415,16 +415,17 @@ static int tpu_probe(struct platform_device *pdev)
tpu->chip.base = -1;
tpu->chip.npwm = TPU_CHANNEL_MAX;
+ pm_runtime_enable(&pdev->dev);
+
ret = pwmchip_add(&tpu->chip);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register PWM chip\n");
+ pm_runtime_disable(&pdev->dev);
return ret;
}
dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
- pm_runtime_enable(&pdev->dev);
-
return 0;
}
@@ -434,12 +435,10 @@ static int tpu_remove(struct platform_device *pdev)
int ret;
ret = pwmchip_remove(&tpu->chip);
- if (ret)
- return ret;
pm_runtime_disable(&pdev->dev);
- return 0;
+ return ret;
}
#ifdef CONFIG_OF
--
2.20.1
From: Nick Bowler <[email protected]>
[ Upstream commit c95b708d5fa65b4e51f088ee077d127fd5a57b70 ]
On a 32-bit kernel, the upper bits of userspace addresses passed via
various ioctls are silently ignored by the nvme driver.
However on a 64-bit kernel running a compat task, these upper bits are
not ignored and are in fact required to be zero for the ioctls to work.
Unfortunately, this difference matters. 32-bit smartctl submits the
NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it
seems the pointer value it puts into the nvme_passthru_cmd structure is
sign extended. This works fine on 32-bit kernels but fails on a 64-bit
one because (at least on my setup) the addresses smartctl uses are
consistently above 2G. For example:
# smartctl -x /dev/nvme0n1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, http://www.smartmontools.org
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address
Since changing 32-bit kernels to actually check all of the submitted
address bits now would break existing userspace, this patch fixes the
compat problem by explicitly zeroing the upper bits in the compat case.
This enables 32-bit smartctl to work on a 64-bit kernel.
Signed-off-by: Nick Bowler <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index b8fe42f4b3c5b..f97c48fd3edae 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -6,6 +6,7 @@
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
+#include <linux/compat.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/hdreg.h>
@@ -1244,6 +1245,18 @@ static void nvme_enable_aen(struct nvme_ctrl *ctrl)
queue_work(nvme_wq, &ctrl->async_event_work);
}
+/*
+ * Convert integer values from ioctl structures to user pointers, silently
+ * ignoring the upper bits in the compat case to match behaviour of 32-bit
+ * kernels.
+ */
+static void __user *nvme_to_user_ptr(uintptr_t ptrval)
+{
+ if (in_compat_syscall())
+ ptrval = (compat_uptr_t)ptrval;
+ return (void __user *)ptrval;
+}
+
static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
{
struct nvme_user_io io;
@@ -1267,7 +1280,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
length = (io.nblocks + 1) << ns->lba_shift;
meta_len = (io.nblocks + 1) * ns->ms;
- metadata = (void __user *)(uintptr_t)io.metadata;
+ metadata = nvme_to_user_ptr(io.metadata);
if (ns->ext) {
length += meta_len;
@@ -1290,7 +1303,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
c.rw.appmask = cpu_to_le16(io.appmask);
return nvme_submit_user_cmd(ns->queue, &c,
- (void __user *)(uintptr_t)io.addr, length,
+ nvme_to_user_ptr(io.addr), length,
metadata, meta_len, lower_32_bits(io.slba), NULL, 0);
}
@@ -1410,9 +1423,9 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
- (void __user *)(uintptr_t)cmd.addr, cmd.data_len,
- (void __user *)(uintptr_t)cmd.metadata,
- cmd.metadata_len, 0, &result, timeout);
+ nvme_to_user_ptr(cmd.addr), cmd.data_len,
+ nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
+ 0, &result, timeout);
nvme_passthru_end(ctrl, effects);
if (status >= 0) {
@@ -1457,8 +1470,8 @@ static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
- (void __user *)(uintptr_t)cmd.addr, cmd.data_len,
- (void __user *)(uintptr_t)cmd.metadata, cmd.metadata_len,
+ nvme_to_user_ptr(cmd.addr), cmd.data_len,
+ nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
0, &cmd.result, timeout);
nvme_passthru_end(ctrl, effects);
--
2.20.1
From: Mathias Nyman <[email protected]>
[ Upstream commit ceca49382ac20e06ce04c21279c7f2868c4ec1d4 ]
Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.
If the port is in U1/U2, then no event is issued, just set link to U0
If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-hub.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 02f52d4f74df8..a9c87eb8951e8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1307,20 +1307,34 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
}
+ /*
+ * set link to U0, steps depend on current link state.
+ * U3: set link to U0 and wait for u3exit completion.
+ * U1/U2: no PLC complete event, only set link to U0.
+ * Resume/Recovery: device initiated U0, only wait for
+ * completion
+ */
if (link_state == USB_SS_PORT_LS_U0) {
- if ((temp & PORT_PLS_MASK) == XDEV_U0)
- break;
+ u32 pls = temp & PORT_PLS_MASK;
+ bool wait_u0 = false;
- if (!((temp & PORT_PLS_MASK) == XDEV_U1 ||
- (temp & PORT_PLS_MASK) == XDEV_U2 ||
- (temp & PORT_PLS_MASK) == XDEV_U3)) {
- xhci_warn(xhci, "Can only set port %d to U0 from U state\n",
- wIndex);
- goto error;
+ /* already in U0 */
+ if (pls == XDEV_U0)
+ break;
+ if (pls == XDEV_U3 ||
+ pls == XDEV_RESUME ||
+ pls == XDEV_RECOVERY) {
+ wait_u0 = true;
+ reinit_completion(&bus_state->u3exit_done[wIndex]);
+ }
+ if (pls <= XDEV_U3) /* U1, U2, U3 */
+ xhci_set_link_state(xhci, ports[wIndex],
+ USB_SS_PORT_LS_U0);
+ if (!wait_u0) {
+ if (pls > XDEV_U3)
+ goto error;
+ break;
}
- reinit_completion(&bus_state->u3exit_done[wIndex]);
- xhci_set_link_state(xhci, ports[wIndex],
- USB_SS_PORT_LS_U0);
spin_unlock_irqrestore(&xhci->lock, flags);
if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
msecs_to_jiffies(100)))
--
2.20.1
From: Cornelia Huck <[email protected]>
[ Upstream commit 05ce3e53f375295c2940390b2b429e506e07655c ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels")
Message-Id: <[email protected]>
Reported-by: Boris Fiuczynski <[email protected]>
Reviewed-by: Peter Oberparleiter <[email protected]>
Reviewed-by: Boris Fiuczynski <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/device.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 0c6245fc77069..983f9c9e08deb 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -849,8 +849,10 @@ static void io_subchannel_register(struct ccw_device *cdev)
* Now we know this subchannel will stay, we can throw
* our delayed uevent.
*/
- dev_set_uevent_suppress(&sch->dev, 0);
- kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ if (dev_get_uevent_suppress(&sch->dev)) {
+ dev_set_uevent_suppress(&sch->dev, 0);
+ kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ }
/* make it known to the system */
ret = ccw_device_add(cdev);
if (ret) {
@@ -1058,8 +1060,11 @@ static int io_subchannel_probe(struct subchannel *sch)
* Throw the delayed uevent for the subchannel, register
* the ccw_device and exit.
*/
- dev_set_uevent_suppress(&sch->dev, 0);
- kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ if (dev_get_uevent_suppress(&sch->dev)) {
+ /* should always be the case for the console */
+ dev_set_uevent_suppress(&sch->dev, 0);
+ kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ }
cdev = sch_get_cdev(sch);
rc = ccw_device_add(cdev);
if (rc) {
--
2.20.1
From: Jiri Olsa <[email protected]>
[ Upstream commit d3296fb372bf7497b0e5d0478c4e7a677ec6f6e9 ]
We hit following warning when running tests on kernel
compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y:
WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200
CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3
RIP: 0010:__get_user_pages_fast+0x1a4/0x200
...
Call Trace:
perf_prepare_sample+0xff1/0x1d90
perf_event_output_forward+0xe8/0x210
__perf_event_overflow+0x11a/0x310
__intel_pmu_pebs_event+0x657/0x850
intel_pmu_drain_pebs_nhm+0x7de/0x11d0
handle_pmi_common+0x1b2/0x650
intel_pmu_handle_irq+0x17b/0x370
perf_event_nmi_handler+0x40/0x60
nmi_handle+0x192/0x590
default_do_nmi+0x6d/0x150
do_nmi+0x2f9/0x3c0
nmi+0x8e/0xd7
While __get_user_pages_fast() is IRQ-safe, it calls access_ok(),
which warns on:
WARN_ON_ONCE(!in_task() && !pagefault_disabled())
Peter suggested disabling page faults around __get_user_pages_fast(),
which gets rid of the warning in access_ok() call.
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 15b123bdcaf53..72d0cfd73cf11 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6537,9 +6537,12 @@ static u64 perf_virt_to_phys(u64 virt)
* Try IRQ-safe __get_user_pages_fast first.
* If failed, leave phys_addr as 0.
*/
- if ((current->mm != NULL) &&
- (__get_user_pages_fast(virt, 1, 0, &p) == 1))
- phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+ if (current->mm != NULL) {
+ pagefault_disable();
+ if (__get_user_pages_fast(virt, 1, 0, &p) == 1)
+ phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+ pagefault_enable();
+ }
if (p)
put_page(p);
--
2.20.1
From: Kai Vehmanen <[email protected]>
[ Upstream commit e6110114d18d330c05fd6de9f31283fd086a5a3a ]
Check if DMA pages were successfully allocated in initialization
before calling free. For many types of memory (like sgbufs)
the extra free is harmless, but not all backends track allocation
state, so add an explicit check.
Signed-off-by: Kai Vehmanen <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/trace.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/trace.c b/sound/soc/sof/trace.c
index 4c3cff031fd66..fd6f5913782bf 100644
--- a/sound/soc/sof/trace.c
+++ b/sound/soc/sof/trace.c
@@ -328,7 +328,10 @@ void snd_sof_free_trace(struct snd_sof_dev *sdev)
{
snd_sof_release_trace(sdev);
- snd_dma_free_pages(&sdev->dmatb);
- snd_dma_free_pages(&sdev->dmatp);
+ if (sdev->dma_trace_pages) {
+ snd_dma_free_pages(&sdev->dmatb);
+ snd_dma_free_pages(&sdev->dmatp);
+ sdev->dma_trace_pages = 0;
+ }
}
EXPORT_SYMBOL(snd_sof_free_trace);
--
2.20.1
ansport.c:937
This bug occurs when cancellation of the S-G transfer races with
transfer completion. When that happens, usb_sg_cancel() may continue
to access the transfer's URBs after usb_sg_wait() has freed them.
The bug is caused by the fact that usb_sg_cancel() does not take any
sort of reference to the transfer, and so there is nothing to prevent
the URBs from being deallocated while the routine is trying to use
them. The fix is to take such a reference by incrementing the
transfer's io->count field while the cancellation is in progres and
decrementing it afterward. The transfer's URBs are not deallocated
until io->complete is triggered, which happens when io->count reaches
zero.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: Kyungtae Kim <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/message.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -588,12 +588,13 @@ void usb_sg_cancel(struct usb_sg_request
int i, retval;
spin_lock_irqsave(&io->lock, flags);
- if (io->status) {
+ if (io->status || io->count == 0) {
spin_unlock_irqrestore(&io->lock, flags);
return;
}
/* shut everything down */
io->status = -ECONNRESET;
+ io->count++; /* Keep the request alive until we're done */
spin_unlock_irqrestore(&io->lock, flags);
for (i = io->entries - 1; i >= 0; --i) {
@@ -607,6 +608,12 @@ void usb_sg_cancel(struct usb_sg_request
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
+
+ spin_lock_irqsave(&io->lock, flags);
+ io->count--;
+ if (!io->count)
+ complete(&io->complete);
+ spin_unlock_irqrestore(&io->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_sg_cancel);
From: Aurelien Jarno <[email protected]>
[ Upstream commit 3464afdf11f9a1e031e7858a05351ceca1792fea ]
On powerpc with recent versions of binutils, readelf outputs an extra
field when dumping the symbols of an object file. For example:
35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct
The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to
be computed correctly and causes the check_abi target to fail.
Fix that by looking for the symbol name in the last field instead of the
8th one. This way it should also cope with future extra fields.
Signed-off-by: Aurelien Jarno <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 33e2638ef7f0d..122321d549227 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -145,7 +145,7 @@ PC_FILE := $(addprefix $(OUTPUT),$(PC_FILE))
GLOBAL_SYM_COUNT = $(shell readelf -s --wide $(BPF_IN_SHARED) | \
cut -d "@" -f1 | sed 's/_v[0-9]_[0-9]_[0-9].*//' | \
- awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$8}' | \
+ awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}' | \
sort -u | wc -l)
VERSIONED_SYM_COUNT = $(shell readelf -s --wide $(OUTPUT)libbpf.so | \
grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | sort -u | wc -l)
@@ -217,7 +217,7 @@ check_abi: $(OUTPUT)libbpf.so
"versioned in $(VERSION_SCRIPT)." >&2; \
readelf -s --wide $(BPF_IN_SHARED) | \
cut -d "@" -f1 | sed 's/_v[0-9]_[0-9]_[0-9].*//' | \
- awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$8}'| \
+ awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}'| \
sort -u > $(OUTPUT)libbpf_global_syms.tmp; \
readelf -s --wide $(OUTPUT)libbpf.so | \
grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | \
--
2.20.1
From: Cornelia Huck <[email protected]>
[ Upstream commit 2bc55eaeb88d30accfc1b6ac2708d4e4b81ca260 ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <[email protected]>
Fixes: 63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/vfio_ccw_drv.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c
index e401a3d0aa570..339a6bc0339b0 100644
--- a/drivers/s390/cio/vfio_ccw_drv.c
+++ b/drivers/s390/cio/vfio_ccw_drv.c
@@ -167,6 +167,11 @@ static int vfio_ccw_sch_probe(struct subchannel *sch)
if (ret)
goto out_disable;
+ if (dev_get_uevent_suppress(&sch->dev)) {
+ dev_set_uevent_suppress(&sch->dev, 0);
+ kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ }
+
VFIO_CCW_MSG_EVENT(4, "bound to subchannel %x.%x.%04x\n",
sch->schid.cssid, sch->schid.ssid,
sch->schid.sch_no);
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 1451a3eed24b5fd6a604683f0b6995e0e7e16c79 ]
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.
Fixes: ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-rcar.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
index 852eb2347954d..b98ec8847b488 100644
--- a/drivers/pwm/pwm-rcar.c
+++ b/drivers/pwm/pwm-rcar.c
@@ -228,24 +228,28 @@ static int rcar_pwm_probe(struct platform_device *pdev)
rcar_pwm->chip.base = -1;
rcar_pwm->chip.npwm = 1;
+ pm_runtime_enable(&pdev->dev);
+
ret = pwmchip_add(&rcar_pwm->chip);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+ pm_runtime_disable(&pdev->dev);
return ret;
}
- pm_runtime_enable(&pdev->dev);
-
return 0;
}
static int rcar_pwm_remove(struct platform_device *pdev)
{
struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pwmchip_remove(&rcar_pwm->chip);
pm_runtime_disable(&pdev->dev);
- return pwmchip_remove(&rcar_pwm->chip);
+ return ret;
}
static const struct of_device_id rcar_pwm_of_table[] = {
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 807e7353d8a7105ce884d22b0dbc034993c6679c ]
Kernel is crashing with the following stacktrace:
BUG: unable to handle kernel NULL pointer dereference at
00000000000005bc
IP: lpfc_nvme_register_port+0x1a8/0x3a0 [lpfc]
...
Call Trace:
lpfc_nlp_state_cleanup+0x2b2/0x500 [lpfc]
lpfc_nlp_set_state+0xd7/0x1a0 [lpfc]
lpfc_cmpl_prli_prli_issue+0x1f7/0x450 [lpfc]
lpfc_disc_state_machine+0x7a/0x1e0 [lpfc]
lpfc_cmpl_els_prli+0x16f/0x1e0 [lpfc]
lpfc_sli_sp_handle_rspiocb+0x5b2/0x690 [lpfc]
lpfc_sli_handle_slow_ring_event_s4+0x182/0x230 [lpfc]
lpfc_do_work+0x87f/0x1570 [lpfc]
kthread+0x10d/0x130
ret_from_fork+0x35/0x40
During target side fault injections, it is possible to hit the
NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit
fixed a rebind and delete race condition, but called lpfc_nlp_put
unconditionally. This triggered a deletion and the crash.
Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp
will be being unregistered/removed. Leave the reference if the flag isn't
set.
Link: https://lore.kernel.org/r/[email protected]
Fixes: b15bd3e6212e ("scsi: lpfc: Fix nvme remoteport registration race conditions")
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nvme.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index a227e36cbdc2b..5a86a1ee0de3b 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -342,13 +342,15 @@ lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
if (ndlp->upcall_flags & NLP_WAIT_FOR_UNREG) {
ndlp->nrport = NULL;
ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG;
- }
- spin_unlock_irq(&vport->phba->hbalock);
+ spin_unlock_irq(&vport->phba->hbalock);
- /* Remove original register reference. The host transport
- * won't reference this rport/remoteport any further.
- */
- lpfc_nlp_put(ndlp);
+ /* Remove original register reference. The host transport
+ * won't reference this rport/remoteport any further.
+ */
+ lpfc_nlp_put(ndlp);
+ } else {
+ spin_unlock_irq(&vport->phba->hbalock);
+ }
rport_err:
return;
--
2.20.1
From: Yan, Zheng <[email protected]>
[ Upstream commit 0aa971b6fd3f92afef6afe24ef78d9bb14471519 ]
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/caps.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index f5a38910a82bf..703945cce0e5d 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1976,8 +1976,12 @@ retry_locked:
}
/* want more caps from mds? */
- if (want & ~(cap->mds_wanted | cap->issued))
- goto ack;
+ if (want & ~cap->mds_wanted) {
+ if (want & ~(cap->mds_wanted | cap->issued))
+ goto ack;
+ if (!__cap_is_valid(cap))
+ goto ack;
+ }
/* things we might delay */
if ((cap->issued & ~retain) == 0)
--
2.20.1
From: Wu Bo <[email protected]>
[ Upstream commit 13e60d3ba287d96eeaf1deaadba51f71578119a3 ]
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Wu Bo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_transport_iscsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 271afea654e2b..a5c78b38d3022 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -2012,7 +2012,7 @@ static void __iscsi_unbind_session(struct work_struct *work)
if (session->target_id == ISCSI_MAX_TARGET) {
spin_unlock_irqrestore(&session->lock, flags);
mutex_unlock(&ihost->mutex);
- return;
+ goto unbind_session_exit;
}
target_id = session->target_id;
@@ -2024,6 +2024,8 @@ static void __iscsi_unbind_session(struct work_struct *work)
ida_simple_remove(&iscsi_sess_ida, target_id);
scsi_remove_target(&session->dev);
+
+unbind_session_exit:
iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
}
--
2.20.1
From: James Morse <[email protected]>
[ Upstream commit 222fc0c8503d98cec3cb2bac2780cdd21a6e31c0 ]
Compat user-space is unable to perform ICIMVAU instructions from
user-space. Instead it uses a compat-syscall. Add the workaround for
Neoverse-N1 #1542419 to this code path.
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/sys_compat.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index f1cb649594271..c9fb02927d3e5 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -8,6 +8,7 @@
*/
#include <linux/compat.h>
+#include <linux/cpufeature.h>
#include <linux/personality.h>
#include <linux/sched.h>
#include <linux/sched/signal.h>
@@ -17,6 +18,7 @@
#include <asm/cacheflush.h>
#include <asm/system_misc.h>
+#include <asm/tlbflush.h>
#include <asm/unistd.h>
static long
@@ -30,6 +32,15 @@ __do_compat_cache_op(unsigned long start, unsigned long end)
if (fatal_signal_pending(current))
return 0;
+ if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+ /*
+ * The workaround requires an inner-shareable tlbi.
+ * We pick the reserved-ASID to minimise the impact.
+ */
+ __tlbi(aside1is, 0);
+ dsb(ish);
+ }
+
ret = __flush_cache_user_range(start, start + chunk);
if (ret)
return ret;
--
2.20.1
From: Qiujun Huang <[email protected]>
[ Upstream commit c6d50296032f0b97473eb2e274dc7cc5d0173847 ]
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
Signed-off-by: Qiujun Huang <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/export.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index b6bfa94332c30..79dc06881e78e 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -315,6 +315,11 @@ static struct dentry *__get_parent(struct super_block *sb,
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
+ if (err) {
+ ceph_mdsc_put_request(req);
+ return ERR_PTR(err);
+ }
+
inode = req->r_target_inode;
if (inode)
ihold(inode);
--
2.20.1
From: Jan Kara <[email protected]>
[ Upstream commit c0e71d602053e4e7637e4bc7d0bc9603ea77a33f ]
When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the
compilation of tools/testing/nvdimm fails with:
Building modules, stage 2.
MODPOST 11 modules
ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined!
Fix the problem by calling dax_pmem_compat_test() only if the kernel has
the required functionality.
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/nvdimm/test/nfit.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c
index bf6422a6af7ff..a8ee5c4d41ebb 100644
--- a/tools/testing/nvdimm/test/nfit.c
+++ b/tools/testing/nvdimm/test/nfit.c
@@ -3164,7 +3164,9 @@ static __init int nfit_test_init(void)
mcsafe_test();
dax_pmem_test();
dax_pmem_core_test();
+#ifdef CONFIG_DEV_DAX_PMEM_COMPAT
dax_pmem_compat_test();
+#endif
nfit_test_setup(nfit_test_lookup, nfit_test_evaluate_dsm);
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 4cd70891308dfb875ef31060c4a4aa8872630a2e ]
Injecting EEH on a 32GB card is causing kernel oops
The pci error handler is doing an IO flush and the offline code is also
doing an IO flush. When the 1st flush is complete the hdwq is destroyed
(freed), yet the second flush accesses the hdwq and crashes.
Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH
flag and the hdwq pointer to see if it is already set and not already
freed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1692ce913b7f0..a951e1c8165ed 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4013,6 +4013,11 @@ lpfc_sli_flush_io_rings(struct lpfc_hba *phba)
struct lpfc_iocbq *piocb, *next_iocb;
spin_lock_irq(&phba->hbalock);
+ if (phba->hba_flag & HBA_IOQ_FLUSH ||
+ !phba->sli4_hba.hdwq) {
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
/* Indicate the I/O queues are flushed */
phba->hba_flag |= HBA_IOQ_FLUSH;
spin_unlock_irq(&phba->hbalock);
--
2.20.1
From: Sagi Grimberg <[email protected]>
[ Upstream commit 25e5cb780e62bde432b401f312bb847edc78b432 ]
We cannot look at blk_rq_payload_bytes without first checking
that the request has a mappable physical segments first (e.g.
blk_rq_nr_phys_segments(rq) != 0) and only then to take the
request payload bytes. This caused us to send a wrong sgl to
the target or even dereference a non-existing buffer in case
we actually got to the data send sequence (if it was in-capsule).
Reported-by: Tony Asleson <[email protected]>
Suggested-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/tcp.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 244984420b41b..11e84ed4de361 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -164,16 +164,14 @@ static inline bool nvme_tcp_async_req(struct nvme_tcp_request *req)
static inline bool nvme_tcp_has_inline_data(struct nvme_tcp_request *req)
{
struct request *rq;
- unsigned int bytes;
if (unlikely(nvme_tcp_async_req(req)))
return false; /* async events don't have a request */
rq = blk_mq_rq_from_pdu(req);
- bytes = blk_rq_payload_bytes(rq);
- return rq_data_dir(rq) == WRITE && bytes &&
- bytes <= nvme_tcp_inline_data_size(req->queue);
+ return rq_data_dir(rq) == WRITE && req->data_len &&
+ req->data_len <= nvme_tcp_inline_data_size(req->queue);
}
static inline struct page *nvme_tcp_req_cur_page(struct nvme_tcp_request *req)
@@ -2090,7 +2088,9 @@ static blk_status_t nvme_tcp_map_data(struct nvme_tcp_queue *queue,
c->common.flags |= NVME_CMD_SGL_METABUF;
- if (rq_data_dir(rq) == WRITE && req->data_len &&
+ if (!blk_rq_nr_phys_segments(rq))
+ nvme_tcp_set_sg_null(c);
+ else if (rq_data_dir(rq) == WRITE &&
req->data_len <= nvme_tcp_inline_data_size(queue))
nvme_tcp_set_sg_inline(queue, c, req->data_len);
else
@@ -2117,7 +2117,8 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns,
req->data_sent = 0;
req->pdu_len = 0;
req->pdu_sent = 0;
- req->data_len = blk_rq_payload_bytes(rq);
+ req->data_len = blk_rq_nr_phys_segments(rq) ?
+ blk_rq_payload_bytes(rq) : 0;
req->curr_bio = rq->bio;
if (rq_data_dir(rq) == WRITE &&
--
2.20.1
From: Javed Hasan <[email protected]>
[ Upstream commit 45e544bfdab2014d11c7595b8ccc3c4715a09015 ]
If PRLI reject code indicates "rejected status", move rport state machine
back to PLOGI state.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libfc/fc_rport.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index da6e97d8dc3bb..6bb8917b99a19 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -1208,9 +1208,15 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
rjt = fc_frame_payload_get(fp, sizeof(*rjt));
if (!rjt)
FC_RPORT_DBG(rdata, "PRLI bad response\n");
- else
+ else {
FC_RPORT_DBG(rdata, "PRLI ELS rejected, reason %x expl %x\n",
rjt->er_reason, rjt->er_explan);
+ if (rjt->er_reason == ELS_RJT_UNAB &&
+ rjt->er_explan == ELS_EXPL_PLOGI_REQD) {
+ fc_rport_enter_plogi(rdata);
+ goto out;
+ }
+ }
fc_rport_error_retry(rdata, FC_EX_ELS_RJT);
}
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 38503943c89f0bafd9e3742f63f872301d44cbea ]
The following kasan bug was called out:
BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...
When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.
Fix by subtracting the function's base value to get an accurate vpi number.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0717e850bcbfd..1692ce913b7f0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2481,6 +2481,8 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
!pmb->u.mb.mbxStatus) {
rpi = pmb->u.mb.un.varWords[0];
vpi = pmb->u.mb.un.varRegLogin.vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ vpi -= phba->sli4_hba.max_cfg_param.vpi_base;
lpfc_unreg_login(phba, vpi, rpi, pmb);
pmb->vport = vport;
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
--
2.20.1
From: William Dauchy <[email protected]>
commit 25629fdaff2ff509dd0b3f5ff93d70a75e79e0a1 upstream.
when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`
To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.
context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: William Dauchy <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_tunnel.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -142,11 +142,8 @@ struct ip_tunnel *ip_tunnel_lookup(struc
cand = t;
}
- if (flags & TUNNEL_NO_KEY)
- goto skip_key_lookup;
-
hlist_for_each_entry_rcu(t, head, hash_node) {
- if (t->parms.i_key != key ||
+ if ((!(flags & TUNNEL_NO_KEY) && t->parms.i_key != key) ||
t->parms.iph.saddr != 0 ||
t->parms.iph.daddr != 0 ||
!(t->dev->flags & IFF_UP))
@@ -158,7 +155,6 @@ struct ip_tunnel *ip_tunnel_lookup(struc
cand = t;
}
-skip_key_lookup:
if (cand)
return cand;
From: Dmitry Monakhov <[email protected]>
[ Upstream commit 4068664e3cd2312610ceac05b74c4cf1853b8325 ]
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Signed-off-by: Dmitry Monakhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/extents.c | 47 +++++++++++++++++++++++++++--------------------
1 file changed, 27 insertions(+), 20 deletions(-)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 164dbfd40c52d..9bd44588eb77c 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -498,6 +498,30 @@ int ext4_ext_check_inode(struct inode *inode)
return ext4_ext_check(inode, ext_inode_hdr(inode), ext_depth(inode), 0);
}
+static void ext4_cache_extents(struct inode *inode,
+ struct ext4_extent_header *eh)
+{
+ struct ext4_extent *ex = EXT_FIRST_EXTENT(eh);
+ ext4_lblk_t prev = 0;
+ int i;
+
+ for (i = le16_to_cpu(eh->eh_entries); i > 0; i--, ex++) {
+ unsigned int status = EXTENT_STATUS_WRITTEN;
+ ext4_lblk_t lblk = le32_to_cpu(ex->ee_block);
+ int len = ext4_ext_get_actual_len(ex);
+
+ if (prev && (prev != lblk))
+ ext4_es_cache_extent(inode, prev, lblk - prev, ~0,
+ EXTENT_STATUS_HOLE);
+
+ if (ext4_ext_is_unwritten(ex))
+ status = EXTENT_STATUS_UNWRITTEN;
+ ext4_es_cache_extent(inode, lblk, len,
+ ext4_ext_pblock(ex), status);
+ prev = lblk + len;
+ }
+}
+
static struct buffer_head *
__read_extent_tree_block(const char *function, unsigned int line,
struct inode *inode, ext4_fsblk_t pblk, int depth,
@@ -532,26 +556,7 @@ __read_extent_tree_block(const char *function, unsigned int line,
*/
if (!(flags & EXT4_EX_NOCACHE) && depth == 0) {
struct ext4_extent_header *eh = ext_block_hdr(bh);
- struct ext4_extent *ex = EXT_FIRST_EXTENT(eh);
- ext4_lblk_t prev = 0;
- int i;
-
- for (i = le16_to_cpu(eh->eh_entries); i > 0; i--, ex++) {
- unsigned int status = EXTENT_STATUS_WRITTEN;
- ext4_lblk_t lblk = le32_to_cpu(ex->ee_block);
- int len = ext4_ext_get_actual_len(ex);
-
- if (prev && (prev != lblk))
- ext4_es_cache_extent(inode, prev,
- lblk - prev, ~0,
- EXTENT_STATUS_HOLE);
-
- if (ext4_ext_is_unwritten(ex))
- status = EXTENT_STATUS_UNWRITTEN;
- ext4_es_cache_extent(inode, lblk, len,
- ext4_ext_pblock(ex), status);
- prev = lblk + len;
- }
+ ext4_cache_extents(inode, eh);
}
return bh;
errout:
@@ -899,6 +904,8 @@ ext4_find_extent(struct inode *inode, ext4_lblk_t block,
path[0].p_bh = NULL;
i = depth;
+ if (!(flags & EXT4_EX_NOCACHE) && depth == 0)
+ ext4_cache_extents(inode, eh);
/* walk through the tree */
while (i) {
ext_debug("depth %d: num %d, max %d\n",
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ]
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some
places it is called with the drv->lock mutex already held.
So it must always be called with the mutex locked. This commit adds missing
locking in the sst_set_be_modules() code-path.
Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/atom/sst-atom-controls.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c
index f883c9340eeee..df8f7994d3b7a 100644
--- a/sound/soc/intel/atom/sst-atom-controls.c
+++ b/sound/soc/intel/atom/sst-atom-controls.c
@@ -966,7 +966,9 @@ static int sst_set_be_modules(struct snd_soc_dapm_widget *w,
dev_dbg(c->dev, "Enter: widget=%s\n", w->name);
if (SND_SOC_DAPM_EVENT_ON(event)) {
+ mutex_lock(&drv->lock);
ret = sst_send_slot_map(drv);
+ mutex_unlock(&drv->lock);
if (ret)
return ret;
ret = sst_send_pipe_module_params(w, k);
--
2.20.1
On 4/28/20 12:22 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.36 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Apr 2020 18:21:07 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.36-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 28/04/2020 19:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.36 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Apr 2020 18:21:07 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.36-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.4:
13 builds: 13 pass, 0 fail
24 boots: 24 pass, 0 fail
40 tests: 40 pass, 0 fail
Linux version: 5.4.36-rc1-g388ff47a1fba
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Wed, 29 Apr 2020 at 00:01, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.36 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Apr 2020 18:21:07 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.36-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.4.36-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 388ff47a1fba8fa27be759acc4f846a75df6bde0
git describe: v5.4.35-169-g388ff47a1fba8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.35-169-g388ff47a1fba8
No regressions (compared to build v5.4.35)
No fixes (compared to build v5.4.35)
Ran 32617 total tests in the following environments and test suites.
Environmnts
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libgpiod
* linux-log-parser
* perf
* network-basic-tests
* kselftest/net
* kselftest/networking
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* spectre-meltdown-checker-test
* v4l2-compliance
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking
--
Linaro LKFT
https://lkft.linaro.org
On Tue, Apr 28, 2020 at 08:22:54PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.36 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Apr 2020 18:21:07 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 427 pass: 427 fail: 0
Guenter