This is the start of the stable review cycle for the 4.14.241 release.
There are 82 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.241-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.241-rc1
Mathias Nyman <[email protected]>
xhci: add xhci_get_virt_ep() helper
Christophe JAILLET <[email protected]>
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
David Sterba <[email protected]>
btrfs: compression: don't try to compress if we don't have enough pages
Stephan Gerhold <[email protected]>
iio: accel: bma180: Fix BMA25x bandwidth register values
Linus Walleij <[email protected]>
iio: accel: bma180: Use explicit member assignment
Doug Berger <[email protected]>
net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
Charles Baylis <[email protected]>
drm: Return -ENOTTY for non-drm ioctls
Peter Collingbourne <[email protected]>
selftest: use mmap instead of posix_memalign to allocate memory
Markus Boehme <[email protected]>
ixgbe: Fix packet corruption due to missing DMA sync
Gustavo A. R. Silva <[email protected]>
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
Haoran Luo <[email protected]>
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
Minas Harutyunyan <[email protected]>
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
John Keeping <[email protected]>
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Ian Ray <[email protected]>
USB: serial: cp210x: fix comments for GE CS1000
Marco De Marco <[email protected]>
USB: serial: option: add support for u-blox LARA-R6 family
Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
Mark Tomlinson <[email protected]>
usb: max-3421: Prevent corruption of freed memory
Julian Sikorski <[email protected]>
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
Mathias Nyman <[email protected]>
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
Nicholas Piggin <[email protected]>
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
Mathias Nyman <[email protected]>
xhci: Fix lost USB 2 remote wake
Takashi Iwai <[email protected]>
ALSA: sb: Fix potential ABBA deadlock in CSP driver
Vasily Gorbik <[email protected]>
s390/ftrace: fix ftrace_update_ftrace_func implementation
Huang Pei <[email protected]>
Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"
Marcelo Henrique Cerri <[email protected]>
proc: Avoid mixing integer types in mem_rw()
Vincent Palatin <[email protected]>
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
Marek Vasut <[email protected]>
spi: cadence: Correct initialisation of runtime PM again
Dmitry Bogdanov <[email protected]>
scsi: target: Fix protect handling in WRITE SAME(32)
Mike Christie <[email protected]>
scsi: iscsi: Fix iface sysfs attr detection
Nguyen Dinh Phi <[email protected]>
netrom: Decrease sock refcount when sock timers expire
Yajun Deng <[email protected]>
net: decnet: Fix sleeping inside in af_decnet
Ziyang Xuan <[email protected]>
net: fix uninit-value in caif_seqpkt_sendmsg
Colin Ian King <[email protected]>
s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
Colin Ian King <[email protected]>
liquidio: Fix unintentional sign extension issue on left shift of u16
Peter Hess <[email protected]>
spi: mediatek: fix fifo rx mode
Riccardo Mancini <[email protected]>
perf probe-file: Delete namelist in del_events() on the error path
Riccardo Mancini <[email protected]>
perf test bpf: Free obj_buf
Riccardo Mancini <[email protected]>
perf lzma: Close lzma stream on exit
Riccardo Mancini <[email protected]>
perf test session_topology: Delete session->evlist
Riccardo Mancini <[email protected]>
perf probe: Fix dso->nsinfo refcounting
Riccardo Mancini <[email protected]>
perf map: Fix dso->nsinfo refcounting
Aleksandr Loktionov <[email protected]>
igb: Check if num of q_vectors is smaller than max before array access
Christophe JAILLET <[email protected]>
iavf: Fix an error handling path in 'iavf_probe()'
Christophe JAILLET <[email protected]>
e1000e: Fix an error handling path in 'e1000_probe()'
Christophe JAILLET <[email protected]>
fm10k: Fix an error handling path in 'fm10k_probe()'
Christophe JAILLET <[email protected]>
igb: Fix an error handling path in 'igb_probe()'
Christophe JAILLET <[email protected]>
ixgbe: Fix an error handling path in 'ixgbe_probe()'
Vinicius Costa Gomes <[email protected]>
igb: Fix use-after-free error during reset
Eric Dumazet <[email protected]>
ipv6: tcp: drop silly ICMPv6 packet too big messages
Eric Dumazet <[email protected]>
tcp: annotate data races around tp->mtu_info
Jason Ekstrand <[email protected]>
dma-buf/sync_file: Don't leak fences on merge failure
Taehee Yoo <[email protected]>
net: validate lwtstate->data before returning from skb_tunnel_info()
Alexander Ovechkin <[email protected]>
net: send SYNACK packet with accepted fwmark
Pavel Skripkin <[email protected]>
net: ti: fix UAF in tlan_remove_one
Pavel Skripkin <[email protected]>
net: qcom/emac: fix UAF in emac_remove
Pavel Skripkin <[email protected]>
net: moxa: fix UAF in moxart_mac_probe
Florian Fainelli <[email protected]>
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
Wolfgang Bumiller <[email protected]>
net: bridge: sync fdb to new unicast-filtering ports
Vasily Averin <[email protected]>
netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
Vadim Fedorenko <[email protected]>
net: ipv6: fix return value of ip6_skb_dst_mtu
Odin Ugedal <[email protected]>
sched/fair: Fix CFS bandwidth hrtimer expiry type
Javed Hasan <[email protected]>
scsi: libfc: Fix array index out of bound exception
Colin Ian King <[email protected]>
scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
Krzysztof Kozlowski <[email protected]>
rtc: max77686: Do not enforce (incorrect) interrupt trigger type
Matthias Maennich <[email protected]>
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
Yang Yingliang <[email protected]>
thermal/core: Correct function name thermal_zone_device_unregister()
Mian Yousaf Kaukab <[email protected]>
arm64: dts: ls208xa: remove bus-num from dspi node
Sudeep Holla <[email protected]>
arm64: dts: juno: Update SCPI nodes as per the YAML schema
Alexandre Torgue <[email protected]>
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
Jonathan Neuschäfer <[email protected]>
ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
Primoz Fiser <[email protected]>
ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
Rafał Miłecki <[email protected]>
ARM: dts: BCM63xx: Fix NAND nodes names
Rafał Miłecki <[email protected]>
ARM: NSP: dts: fix NAND nodes names
Rafał Miłecki <[email protected]>
ARM: Cygnus: dts: fix NAND nodes names
Rafał Miłecki <[email protected]>
ARM: brcmstb: dts: fix NAND nodes names
Philipp Zabel <[email protected]>
reset: ti-syscon: fix to_ti_syscon_reset_data macro
Elaine Zhang <[email protected]>
arm64: dts: rockchip: Fix power-controller node names for rk3328
Elaine Zhang <[email protected]>
ARM: dts: rockchip: Fix power-controller node names for rk3288
Ezequiel Garcia <[email protected]>
ARM: dts: rockchip: Fix the timer clocks order
Johan Jonker <[email protected]>
arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
Johan Jonker <[email protected]>
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
Corentin Labbe <[email protected]>
ARM: dts: gemini: add device_type on pci
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +-
arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
arch/arm/boot/dts/bcm63138.dtsi | 2 +-
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 4 +-
arch/arm/boot/dts/bcm7445.dtsi | 2 +-
arch/arm/boot/dts/bcm911360_entphn.dts | 4 +-
arch/arm/boot/dts/bcm958300k.dts | 4 +-
arch/arm/boot/dts/bcm958305k.dts | 4 +-
arch/arm/boot/dts/bcm958522er.dts | 4 +-
arch/arm/boot/dts/bcm958525er.dts | 4 +-
arch/arm/boot/dts/bcm958525xmc.dts | 4 +-
arch/arm/boot/dts/bcm958622hr.dts | 4 +-
arch/arm/boot/dts/bcm958623hr.dts | 4 +-
arch/arm/boot/dts/bcm958625hr.dts | 4 +-
arch/arm/boot/dts/bcm958625k.dts | 4 +-
arch/arm/boot/dts/bcm963138dvt.dts | 4 +-
arch/arm/boot/dts/bcm988312hr.dts | 4 +-
arch/arm/boot/dts/gemini.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +-
arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
arch/arm/boot/dts/rk3188.dtsi | 8 +-
arch/arm/boot/dts/rk3288.dtsi | 14 ++--
arch/arm/boot/dts/stm32f429.dtsi | 2 +-
arch/arm/mach-imx/suspend-imx53.S | 4 +-
arch/arm64/boot/dts/arm/juno-base.dtsi | 6 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
arch/mips/include/asm/pgalloc.h | 10 +--
arch/powerpc/kvm/book3s_rtas.c | 25 +++++-
arch/s390/include/asm/ftrace.h | 1 +
arch/s390/kernel/ftrace.c | 2 +
arch/s390/kernel/mcount.S | 4 +-
arch/s390/net/bpf_jit_comp.c | 2 +-
drivers/dma-buf/sync_file.c | 13 ++--
drivers/gpu/drm/drm_ioctl.c | 3 +
drivers/iio/accel/bma180.c | 75 +++++++++++-------
drivers/media/pci/ngene/ngene-core.c | 2 +-
drivers/media/pci/ngene/ngene.h | 14 ++--
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 22 ++----
drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 6 --
.../ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +-
drivers/net/ethernet/intel/e1000e/netdev.c | 1 +
drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 1 +
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 1 +
drivers/net/ethernet/intel/igb/igb_main.c | 12 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 +-
drivers/net/ethernet/moxa/moxart_ether.c | 4 +-
drivers/net/ethernet/qualcomm/emac/emac.c | 3 +-
drivers/net/ethernet/ti/tlan.c | 3 +-
drivers/reset/reset-ti-syscon.c | 4 +-
drivers/rtc/rtc-max77686.c | 4 +-
drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
drivers/scsi/libfc/fc_rport.c | 13 ++--
drivers/scsi/scsi_transport_iscsi.c | 90 ++++++++--------------
drivers/spi/spi-cadence.c | 14 ++--
drivers/spi/spi-fsl-dspi.c | 4 +-
drivers/spi/spi-mt65xx.c | 16 +++-
drivers/target/target_core_sbc.c | 35 ++++-----
drivers/thermal/thermal_core.c | 2 +-
drivers/usb/core/hub.c | 68 +++++++++++++---
drivers/usb/core/quirks.c | 4 -
drivers/usb/dwc2/gadget.c | 10 ++-
drivers/usb/host/max3421-hcd.c | 44 ++++-------
drivers/usb/host/xhci-hub.c | 3 +-
drivers/usb/host/xhci-ring.c | 58 ++++++++++----
drivers/usb/host/xhci.h | 3 +-
drivers/usb/renesas_usbhs/fifo.c | 7 ++
drivers/usb/serial/cp210x.c | 5 +-
drivers/usb/serial/option.c | 3 +
drivers/usb/storage/unusual_uas.h | 7 ++
fs/btrfs/inode.c | 2 +-
fs/proc/base.c | 2 +-
include/drm/drm_ioctl.h | 1 +
include/net/dst_metadata.h | 4 +-
include/net/ip6_route.h | 2 +-
kernel/sched/fair.c | 4 +-
kernel/trace/ring_buffer.c | 28 ++++++-
net/bridge/br_if.c | 17 +++-
net/caif/caif_socket.c | 3 +-
net/decnet/af_decnet.c | 27 +++----
net/ipv4/tcp_ipv4.c | 4 +-
net/ipv4/tcp_output.c | 1 +
net/ipv6/tcp_ipv6.c | 22 +++++-
net/ipv6/xfrm6_output.c | 2 +-
net/netfilter/nf_conntrack_netlink.c | 3 +
net/netrom/nr_timer.c | 20 ++---
scripts/mkcompile_h | 14 +++-
sound/isa/sb/sb16_csp.c | 4 +
tools/perf/tests/bpf.c | 2 +
tools/perf/tests/topology.c | 1 +
tools/perf/util/lzma.c | 8 +-
tools/perf/util/map.c | 2 +
tools/perf/util/probe-event.c | 4 +-
tools/perf/util/probe-file.c | 4 +-
tools/testing/selftests/vm/userfaultfd.c | 6 +-
97 files changed, 556 insertions(+), 352 deletions(-)
From: Elaine Zhang <[email protected]>
[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ]
Use more generic names (as recommended in the device tree specification
or the binding documentation)
Signed-off-by: Elaine Zhang <[email protected]>
Reviewed-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8abf0990c691..9adb58930c08 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -745,7 +745,7 @@
* *_HDMI HDMI
* *_MIPI_* MIPI
*/
- pd_vio@RK3288_PD_VIO {
+ power-domain@RK3288_PD_VIO {
reg = <RK3288_PD_VIO>;
clocks = <&cru ACLK_IEP>,
<&cru ACLK_ISP>,
@@ -787,7 +787,7 @@
* Note: The following 3 are HEVC(H.265) clocks,
* and on the ACLK_HEVC_NIU (NOC).
*/
- pd_hevc@RK3288_PD_HEVC {
+ power-domain@RK3288_PD_HEVC {
reg = <RK3288_PD_HEVC>;
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
@@ -801,7 +801,7 @@
* (video endecoder & decoder) clocks that on the
* ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
*/
- pd_video@RK3288_PD_VIDEO {
+ power-domain@RK3288_PD_VIDEO {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
@@ -812,7 +812,7 @@
* Note: ACLK_GPU is the GPU clock,
* and on the ACLK_GPU_NIU (NOC).
*/
- pd_gpu@RK3288_PD_GPU {
+ power-domain@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
--
2.30.2
From: Aleksandr Loktionov <[email protected]>
[ Upstream commit 6c19d772618fea40d9681f259368f284a330fd90 ]
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.
Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI")
Signed-off-by: Aleksandr Loktionov <[email protected]>
Reviewed-by: Grzegorz Siwik <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Reviewed-by: Slawomir Laba <[email protected]>
Reviewed-by: Sylwester Dziedziuch <[email protected]>
Reviewed-by: Mateusz Palczewski <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c4898bb9896f..6bd30d51dafc 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -949,6 +949,7 @@ static void igb_configure_msix(struct igb_adapter *adapter)
**/
static int igb_request_msix(struct igb_adapter *adapter)
{
+ unsigned int num_q_vectors = adapter->num_q_vectors;
struct net_device *netdev = adapter->netdev;
int i, err = 0, vector = 0, free_vector = 0;
@@ -957,7 +958,13 @@ static int igb_request_msix(struct igb_adapter *adapter)
if (err)
goto err_out;
- for (i = 0; i < adapter->num_q_vectors; i++) {
+ if (num_q_vectors > MAX_Q_VECTORS) {
+ num_q_vectors = MAX_Q_VECTORS;
+ dev_warn(&adapter->pdev->dev,
+ "The number of queue vectors (%d) is higher than max allowed (%d)\n",
+ adapter->num_q_vectors, MAX_Q_VECTORS);
+ }
+ for (i = 0; i < num_q_vectors; i++) {
struct igb_q_vector *q_vector = adapter->q_vector[i];
vector++;
--
2.30.2
From: Riccardo Mancini <[email protected]>
[ Upstream commit 233f2dc1c284337286f9a64c0152236779a42f6c ]
ASan reports a memory leak related to session->evlist while running:
# perf test "41: Session topology".
When perf_data is in write mode, session->evlist is owned by the caller,
which should also take care of deleting it.
This patch adds the missing evlist__delete().
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: c84974ed9fb67293 ("perf test: Add entry to test cpu topology")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/822f741f06eb25250fb60686cf30a35f447e9e91.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/topology.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c
index 4e9dad8c9763..f03c26b369c7 100644
--- a/tools/perf/tests/topology.c
+++ b/tools/perf/tests/topology.c
@@ -50,6 +50,7 @@ static int session_write_header(char *path)
TEST_ASSERT_VAL("failed to write header",
!perf_session__write_header(session, session->evlist, file.fd, true));
+ evlist__delete(session->evlist);
perf_session__delete(session);
return 0;
--
2.30.2
From: Riccardo Mancini <[email protected]>
[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ]
ASan reports memory leaks when running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
One of these is caused by the lzma stream never being closed inside
lzma_decompress_to_file().
This patch adds the missing lzma_end().
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/lzma.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/perf/util/lzma.c b/tools/perf/util/lzma.c
index 07498eaddc08..bbf4c6bc2c2e 100644
--- a/tools/perf/util/lzma.c
+++ b/tools/perf/util/lzma.c
@@ -64,7 +64,7 @@ int lzma_decompress_to_file(const char *input, int output_fd)
if (ferror(infile)) {
pr_err("lzma: read error: %s\n", strerror(errno));
- goto err_fclose;
+ goto err_lzma_end;
}
if (feof(infile))
@@ -78,7 +78,7 @@ int lzma_decompress_to_file(const char *input, int output_fd)
if (writen(output_fd, buf_out, write_size) != write_size) {
pr_err("lzma: write error: %s\n", strerror(errno));
- goto err_fclose;
+ goto err_lzma_end;
}
strm.next_out = buf_out;
@@ -90,11 +90,13 @@ int lzma_decompress_to_file(const char *input, int output_fd)
break;
pr_err("lzma: failed %s\n", lzma_strerror(ret));
- goto err_fclose;
+ goto err_lzma_end;
}
}
err = 0;
+err_lzma_end:
+ lzma_end(&strm);
err_fclose:
fclose(infile);
return err;
--
2.30.2
From: Vinicius Costa Gomes <[email protected]>
[ Upstream commit 7b292608db23ccbbfbfa50cdb155d01725d7a52e ]
Cleans the next descriptor to watch (next_to_watch) when cleaning the
TX ring.
Failure to do so can cause invalid memory accesses. If igb_poll() runs
while the controller is reset this can lead to the driver try to free
a skb that was already freed.
(The crash is harder to reproduce with the igb driver, but the same
potential problem exists as the code is identical to igc)
Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Reported-by: Erez Geva <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 50fa0401c701..36c656736811 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3962,6 +3962,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring)
DMA_TO_DEVICE);
}
+ tx_buffer->next_to_watch = NULL;
+
/* move us one more past the eop_desc for start of next pkt */
tx_buffer++;
i++;
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 4589075608420bc49fcef6e98279324bf2bb91ae ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 111b9dc5c981 ("e1000e: add aer support")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Sasha Neftin <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f50d0da8fefe..116914de603e 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7392,6 +7392,7 @@ err_flashmap:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
+ pci_disable_pcie_error_reporting(pdev);
pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
--
2.30.2
From: Riccardo Mancini <[email protected]>
[ Upstream commit 937654ce497fb6e977a8c52baee5f7d9616302d9 ]
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
The first of these leaks is caused by obj_buf never being deallocated in
__test__bpf.
This patch adds the missing free.
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lore.kernel.org/lkml/60f3ca935fe6672e7e866276ce6264c9e26e4c87.1626343282.git.rickyman7@gmail.com
[ Added missing stdlib.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/bpf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/perf/tests/bpf.c b/tools/perf/tests/bpf.c
index 34c22cdf4d5d..3fc7fd779c27 100644
--- a/tools/perf/tests/bpf.c
+++ b/tools/perf/tests/bpf.c
@@ -1,5 +1,6 @@
#include <errno.h>
#include <stdio.h>
+#include <stdlib.h>
#include <sys/epoll.h>
#include <sys/types.h>
#include <sys/stat.h>
@@ -275,6 +276,7 @@ static int __test__bpf(int idx)
}
out:
+ free(obj_buf);
bpf__clear();
return ret;
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit e85e14d68f517ef12a5fb8123fff65526b35b6cd ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 63784576ae8b..6b71fc19ab38 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -2095,6 +2095,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_netdev:
+ pci_disable_pcie_error_reporting(pdev);
pci_release_mem_regions(pdev);
err_pci_reg:
err_dma:
--
2.30.2
From: Vadim Fedorenko <[email protected]>
commit 40fc3054b45820c28ea3c65e2c86d041dc244a8a upstream.
Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.
Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Vadim Fedorenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/ip6_route.h | 2 +-
net/ipv6/xfrm6_output.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -214,7 +214,7 @@ static inline bool ipv6_anycast_destinat
int ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
int (*output)(struct net *, struct sock *, struct sk_buff *));
-static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+static inline unsigned int ip6_skb_dst_mtu(struct sk_buff *skb)
{
struct ipv6_pinfo *np = skb->sk && !dev_recursion_level() ?
inet6_sk(skb->sk) : NULL;
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -146,7 +146,7 @@ static int __xfrm6_output(struct net *ne
{
struct dst_entry *dst = skb_dst(skb);
struct xfrm_state *x = dst->xfrm;
- int mtu;
+ unsigned int mtu;
bool toobig;
#ifdef CONFIG_NETFILTER
From: Colin Ian King <[email protected]>
[ Upstream commit e7efc2ce3d0789cd7c21b70ff00cd7838d382639 ]
Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS
(29) bits will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7)
the shifted value will be sign extended and the top 32 bits of the result
will be set.
Fix this by casting the u16 values to a u64 before the 29 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 3451b97cce2d ("liquidio: CN23XX register setup")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
index 30f0e54f658e..4248ba307b66 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c
@@ -420,7 +420,7 @@ static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
* bits 32:47 indicate the PVF num.
*/
for (q_no = 0; q_no < ern; q_no++) {
- reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
+ reg_val = (u64)oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
/* for VF assigned queues. */
if (q_no < oct->sriov_info.pf_srn) {
--
2.30.2
From: Riccardo Mancini <[email protected]>
[ Upstream commit dedeb4be203b382ba7245d13079bc3b0f6d40c65 ]
ASan reports a memory leak of nsinfo during the execution of:
# perf test "31: Lookup mmap thread".
The leak is caused by a refcounted variable being replaced without
dropping the refcount.
This patch makes sure that the refcnt of nsinfo is decreased whenever
a refcounted variable is replaced with a new value.
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: 544abd44c7064c8a ("perf probe: Allow placing uprobes in alternate namespaces.")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/probe-event.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 7c286756c34b..a0597e417ca3 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -197,8 +197,10 @@ struct map *get_target_map(const char *target, struct nsinfo *nsi, bool user)
struct map *map;
map = dso__new_map(target);
- if (map && map->dso)
+ if (map && map->dso) {
+ nsinfo__put(map->dso->nsinfo);
map->dso->nsinfo = nsinfo__get(nsi);
+ }
return map;
} else {
return kernel_get_module_map(target);
--
2.30.2
From: Peter Hess <[email protected]>
[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ]
In FIFO mode were two problems:
- RX mode was never handled and
- in this case the tx_buf pointer was NULL and caused an exception
fix this by handling RX mode in mtk_spi_fifo_transfer
Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Peter Hess <[email protected]>
Signed-off-by: Frank Wunderlich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-mt65xx.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index da28c52c9da1..e2b171057b3b 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -392,13 +392,23 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
mtk_spi_setup_packet(master);
cnt = xfer->len / 4;
- iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+ if (xfer->tx_buf)
+ iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
+
+ if (xfer->rx_buf)
+ ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt);
remainder = xfer->len % 4;
if (remainder > 0) {
reg_val = 0;
- memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder);
- writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ if (xfer->tx_buf) {
+ memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder);
+ writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ }
+ if (xfer->rx_buf) {
+ reg_val = readl(mdata->base + SPI_RX_DATA_REG);
+ memcpy(xfer->rx_buf + (cnt * 4), ®_val, remainder);
+ }
}
mtk_spi_enable_transfer(master);
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 91091656252f5d6d8c476e0c92776ce9fae7b445 ]
Currently array jit->seen_reg[r1] is being accessed before the range
checking of index r1. The range changing on r1 should be performed
first since it will avoid any potential out-of-range accesses on the
array seen_reg[] and also it is more optimal to perform checks on r1
before fetching data from the array. Fix this by swapping the order
of the checks before the array access.
Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Ilya Leoshkevich <[email protected]>
Acked-by: Ilya Leoshkevich <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/net/bpf_jit_comp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index b8bd84104843..bb3710e7ad9c 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -117,7 +117,7 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
{
u32 r1 = reg2hex[b1];
- if (!jit->seen_reg[r1] && r1 >= 6 && r1 <= 15)
+ if (r1 >= 6 && r1 <= 15 && !jit->seen_reg[r1])
jit->seen_reg[r1] = 1;
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 1b5d204c57c1..ad2dd5b747b2 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2924,6 +2924,7 @@ static int i40evf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
+ pci_disable_pcie_error_reporting(pdev);
pci_release_regions(pdev);
err_pci_reg:
err_dma:
--
2.30.2
From: Ziyang Xuan <[email protected]>
[ Upstream commit 991e634360f2622a683b48dfe44fe6d9cb765a09 ]
When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.
=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
___sys_sendmsg net/socket.c:2397 [inline]
__sys_sendmmsg+0x808/0xc90 net/socket.c:2480
__compat_sys_sendmmsg net/compat.c:656 [inline]
Reported-by: [email protected]
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes: bece7b2398d0 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/caif/caif_socket.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index df936d2f58bd..c44ade1b1833 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -539,7 +539,8 @@ static int caif_seqpkt_sendmsg(struct socket *sock, struct msghdr *msg,
goto err;
ret = -EINVAL;
- if (unlikely(msg->msg_iter.iov->iov_base == NULL))
+ if (unlikely(msg->msg_iter.nr_segs == 0) ||
+ unlikely(msg->msg_iter.iov->iov_base == NULL))
goto err;
noblock = msg->msg_flags & MSG_DONTWAIT;
--
2.30.2
From: Odin Ugedal <[email protected]>
[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]
The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.
This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.
Signed-off-by: Odin Ugedal <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Ben Segall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 37ac76dce908..3ff60230710c 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4464,7 +4464,7 @@ static const u64 cfs_bandwidth_slack_period = 5 * NSEC_PER_MSEC;
static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
{
struct hrtimer *refresh_timer = &cfs_b->period_timer;
- u64 remaining;
+ s64 remaining;
/* if the call-back is running a quota refresh is already occurring */
if (hrtimer_callback_running(refresh_timer))
@@ -4472,7 +4472,7 @@ static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
/* is a quota refresh about to occur? */
remaining = ktime_to_ns(hrtimer_expires_remaining(refresh_timer));
- if (remaining < min_expire)
+ if (remaining < (s64)min_expire)
return 1;
return 0;
--
2.30.2
From: Yajun Deng <[email protected]>
[ Upstream commit 5f119ba1d5771bbf46d57cff7417dcd84d3084ba ]
The release_sock() is blocking function, it would change the state
after sleeping. use wait_woken() instead.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yajun Deng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/decnet/af_decnet.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 8dbfcd388633..9c7b8ff4556a 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -824,7 +824,7 @@ static int dn_auto_bind(struct socket *sock)
static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
{
struct dn_scp *scp = DN_SK(sk);
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
int err;
if (scp->state != DN_CR)
@@ -834,11 +834,11 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
scp->segsize_loc = dst_metric_advmss(__sk_dst_get(sk));
dn_send_conn_conf(sk, allocation);
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+ add_wait_queue(sk_sleep(sk), &wait);
for(;;) {
release_sock(sk);
if (scp->state == DN_CC)
- *timeo = schedule_timeout(*timeo);
+ *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
lock_sock(sk);
err = 0;
if (scp->state == DN_RUN)
@@ -852,9 +852,8 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
err = -EAGAIN;
if (!*timeo)
break;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
}
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
if (err == 0) {
sk->sk_socket->state = SS_CONNECTED;
} else if (scp->state != DN_CC) {
@@ -866,7 +865,7 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
static int dn_wait_run(struct sock *sk, long *timeo)
{
struct dn_scp *scp = DN_SK(sk);
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
int err = 0;
if (scp->state == DN_RUN)
@@ -875,11 +874,11 @@ static int dn_wait_run(struct sock *sk, long *timeo)
if (!*timeo)
return -EALREADY;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+ add_wait_queue(sk_sleep(sk), &wait);
for(;;) {
release_sock(sk);
if (scp->state == DN_CI || scp->state == DN_CC)
- *timeo = schedule_timeout(*timeo);
+ *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
lock_sock(sk);
err = 0;
if (scp->state == DN_RUN)
@@ -893,9 +892,8 @@ static int dn_wait_run(struct sock *sk, long *timeo)
err = -ETIMEDOUT;
if (!*timeo)
break;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
}
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
out:
if (err == 0) {
sk->sk_socket->state = SS_CONNECTED;
@@ -1040,16 +1038,16 @@ static void dn_user_copy(struct sk_buff *skb, struct optdata_dn *opt)
static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo)
{
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
struct sk_buff *skb = NULL;
int err = 0;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+ add_wait_queue(sk_sleep(sk), &wait);
for(;;) {
release_sock(sk);
skb = skb_dequeue(&sk->sk_receive_queue);
if (skb == NULL) {
- *timeo = schedule_timeout(*timeo);
+ *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo);
skb = skb_dequeue(&sk->sk_receive_queue);
}
lock_sock(sk);
@@ -1064,9 +1062,8 @@ static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo)
err = -EAGAIN;
if (!*timeo)
break;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
}
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
return skb == NULL ? ERR_PTR(err) : skb;
}
--
2.30.2
From: Vasily Averin <[email protected]>
commit c23a9fd209bc6f8c1fa6ee303fdf037d784a1627 upstream.
Two patches listed below removed ctnetlink_dump_helpinfo call from under
rcu_read_lock. Now its rcu_dereference generates following warning:
=============================
WARNING: suspicious RCU usage
5.13.0+ #5 Not tainted
-----------------------------
net/netfilter/nf_conntrack_netlink.c:221 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
stack backtrace:
CPU: 1 PID: 2251 Comm: conntrack Not tainted 5.13.0+ #5
Call Trace:
dump_stack+0x7f/0xa1
ctnetlink_dump_helpinfo+0x134/0x150 [nf_conntrack_netlink]
ctnetlink_fill_info+0x2c2/0x390 [nf_conntrack_netlink]
ctnetlink_dump_table+0x13f/0x370 [nf_conntrack_netlink]
netlink_dump+0x10c/0x370
__netlink_dump_start+0x1a7/0x260
ctnetlink_get_conntrack+0x1e5/0x250 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x613/0x993 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x55/0x120 [nfnetlink]
netlink_unicast+0x181/0x260
netlink_sendmsg+0x23f/0x460
sock_sendmsg+0x5b/0x60
__sys_sendto+0xf1/0x160
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x36/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 49ca022bccc5 ("netfilter: ctnetlink: don't dump ct extensions of unconfirmed conntracks")
Fixes: 0b35f6031a00 ("netfilter: Remove duplicated rcu_read_lock.")
Signed-off-by: Vasily Averin <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_netlink.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -196,6 +196,7 @@ static int ctnetlink_dump_helpinfo(struc
if (!help)
return 0;
+ rcu_read_lock();
helper = rcu_dereference(help->helper);
if (!helper)
goto out;
@@ -211,9 +212,11 @@ static int ctnetlink_dump_helpinfo(struc
nla_nest_end(skb, nest_helper);
out:
+ rcu_read_unlock();
return 0;
nla_put_failure:
+ rcu_read_unlock();
return -1;
}
From: Vincent Palatin <[email protected]>
[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ]
This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd.
While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.
The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.
For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.
Signed-off-by: Vincent Palatin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/quirks.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 3dfd584a1ef3..2ca6ed207e26 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -325,10 +325,6 @@ static const struct usb_device_id usb_quirk_list[] = {
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
- /* Fibocom L850-GL LTE Modem */
- { USB_DEVICE(0x2cb7, 0x0007), .driver_info =
- USB_QUIRK_IGNORE_REMOTE_WAKEUP },
-
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
--
2.30.2
From: Ian Ray <[email protected]>
commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.
Fix comments for GE CS1000 CP210x USB ID assignments.
Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -206,8 +206,8 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
{ USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */
{ USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */
- { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 Display serial interface */
- { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 M.2 Key E serial interface */
+ { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 M.2 Key E serial interface */
+ { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 Display serial interface */
{ USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */
{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
From: Mike Christie <[email protected]>
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_transport_iscsi.c | 90 +++++++++++------------------
1 file changed, 34 insertions(+), 56 deletions(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 95c61fb4b81b..064c941e5483 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -427,39 +427,10 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct iscsi_iface *iface = iscsi_dev_to_iface(dev);
struct iscsi_transport *t = iface->transport;
- int param;
- int param_type;
+ int param = -1;
if (attr == &dev_attr_iface_enabled.attr)
param = ISCSI_NET_PARAM_IFACE_ENABLE;
- else if (attr == &dev_attr_iface_vlan_id.attr)
- param = ISCSI_NET_PARAM_VLAN_ID;
- else if (attr == &dev_attr_iface_vlan_priority.attr)
- param = ISCSI_NET_PARAM_VLAN_PRIORITY;
- else if (attr == &dev_attr_iface_vlan_enabled.attr)
- param = ISCSI_NET_PARAM_VLAN_ENABLED;
- else if (attr == &dev_attr_iface_mtu.attr)
- param = ISCSI_NET_PARAM_MTU;
- else if (attr == &dev_attr_iface_port.attr)
- param = ISCSI_NET_PARAM_PORT;
- else if (attr == &dev_attr_iface_ipaddress_state.attr)
- param = ISCSI_NET_PARAM_IPADDR_STATE;
- else if (attr == &dev_attr_iface_delayed_ack_en.attr)
- param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
- else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
- param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
- else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
- param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
- else if (attr == &dev_attr_iface_tcp_wsf.attr)
- param = ISCSI_NET_PARAM_TCP_WSF;
- else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
- param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
- else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
- param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
- else if (attr == &dev_attr_iface_cache_id.attr)
- param = ISCSI_NET_PARAM_CACHE_ID;
- else if (attr == &dev_attr_iface_redirect_en.attr)
- param = ISCSI_NET_PARAM_REDIRECT_EN;
else if (attr == &dev_attr_iface_def_taskmgmt_tmo.attr)
param = ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO;
else if (attr == &dev_attr_iface_header_digest.attr)
@@ -496,6 +467,38 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
param = ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN;
else if (attr == &dev_attr_iface_initiator_name.attr)
param = ISCSI_IFACE_PARAM_INITIATOR_NAME;
+
+ if (param != -1)
+ return t->attr_is_visible(ISCSI_IFACE_PARAM, param);
+
+ if (attr == &dev_attr_iface_vlan_id.attr)
+ param = ISCSI_NET_PARAM_VLAN_ID;
+ else if (attr == &dev_attr_iface_vlan_priority.attr)
+ param = ISCSI_NET_PARAM_VLAN_PRIORITY;
+ else if (attr == &dev_attr_iface_vlan_enabled.attr)
+ param = ISCSI_NET_PARAM_VLAN_ENABLED;
+ else if (attr == &dev_attr_iface_mtu.attr)
+ param = ISCSI_NET_PARAM_MTU;
+ else if (attr == &dev_attr_iface_port.attr)
+ param = ISCSI_NET_PARAM_PORT;
+ else if (attr == &dev_attr_iface_ipaddress_state.attr)
+ param = ISCSI_NET_PARAM_IPADDR_STATE;
+ else if (attr == &dev_attr_iface_delayed_ack_en.attr)
+ param = ISCSI_NET_PARAM_DELAYED_ACK_EN;
+ else if (attr == &dev_attr_iface_tcp_nagle_disable.attr)
+ param = ISCSI_NET_PARAM_TCP_NAGLE_DISABLE;
+ else if (attr == &dev_attr_iface_tcp_wsf_disable.attr)
+ param = ISCSI_NET_PARAM_TCP_WSF_DISABLE;
+ else if (attr == &dev_attr_iface_tcp_wsf.attr)
+ param = ISCSI_NET_PARAM_TCP_WSF;
+ else if (attr == &dev_attr_iface_tcp_timer_scale.attr)
+ param = ISCSI_NET_PARAM_TCP_TIMER_SCALE;
+ else if (attr == &dev_attr_iface_tcp_timestamp_en.attr)
+ param = ISCSI_NET_PARAM_TCP_TIMESTAMP_EN;
+ else if (attr == &dev_attr_iface_cache_id.attr)
+ param = ISCSI_NET_PARAM_CACHE_ID;
+ else if (attr == &dev_attr_iface_redirect_en.attr)
+ param = ISCSI_NET_PARAM_REDIRECT_EN;
else if (iface->iface_type == ISCSI_IFACE_TYPE_IPV4) {
if (attr == &dev_attr_ipv4_iface_ipaddress.attr)
param = ISCSI_NET_PARAM_IPV4_ADDR;
@@ -586,32 +589,7 @@ static umode_t iscsi_iface_attr_is_visible(struct kobject *kobj,
return 0;
}
- switch (param) {
- case ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO:
- case ISCSI_IFACE_PARAM_HDRDGST_EN:
- case ISCSI_IFACE_PARAM_DATADGST_EN:
- case ISCSI_IFACE_PARAM_IMM_DATA_EN:
- case ISCSI_IFACE_PARAM_INITIAL_R2T_EN:
- case ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN:
- case ISCSI_IFACE_PARAM_PDU_INORDER_EN:
- case ISCSI_IFACE_PARAM_ERL:
- case ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH:
- case ISCSI_IFACE_PARAM_FIRST_BURST:
- case ISCSI_IFACE_PARAM_MAX_R2T:
- case ISCSI_IFACE_PARAM_MAX_BURST:
- case ISCSI_IFACE_PARAM_CHAP_AUTH_EN:
- case ISCSI_IFACE_PARAM_BIDI_CHAP_EN:
- case ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL:
- case ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN:
- case ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN:
- case ISCSI_IFACE_PARAM_INITIATOR_NAME:
- param_type = ISCSI_IFACE_PARAM;
- break;
- default:
- param_type = ISCSI_NET_PARAM;
- }
-
- return t->attr_is_visible(param_type, param);
+ return t->attr_is_visible(ISCSI_NET_PARAM, param);
}
static struct attribute *iscsi_iface_attrs[] = {
--
2.30.2
From: Marek Vasut <[email protected]>
[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ]
The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.
Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.
Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Charles Keepax <[email protected]>
Cc: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-cadence.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 9ed5f0010e44..d9aeb9efa7aa 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -585,6 +585,12 @@ static int cdns_spi_probe(struct platform_device *pdev)
goto clk_dis_apb;
}
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
if (ret < 0)
master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
@@ -599,11 +605,6 @@ static int cdns_spi_probe(struct platform_device *pdev)
/* SPI controller initializations */
cdns_spi_init_hw(xspi);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
-
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
ret = -ENXIO;
@@ -636,6 +637,9 @@ static int cdns_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "spi_register_master failed\n");
--
2.30.2
From: Riccardo Mancini <[email protected]>
[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ]
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.
This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/probe-file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
index 6ab9230ce8ee..4de93df73c4c 100644
--- a/tools/perf/util/probe-file.c
+++ b/tools/perf/util/probe-file.c
@@ -342,11 +342,11 @@ int probe_file__del_events(int fd, struct strfilter *filter)
ret = probe_file__get_events(fd, filter, namelist);
if (ret < 0)
- return ret;
+ goto out;
ret = probe_file__del_strlist(fd, namelist);
+out:
strlist__delete(namelist);
-
return ret;
}
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index fdbb0a3dc9b4..6929aa13adc3 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -500,7 +500,7 @@ ahc_inq(struct ahc_softc *ahc, u_int port)
return ((ahc_inb(ahc, port))
| (ahc_inb(ahc, port+1) << 8)
| (ahc_inb(ahc, port+2) << 16)
- | (ahc_inb(ahc, port+3) << 24)
+ | (((uint64_t)ahc_inb(ahc, port+3)) << 24)
| (((uint64_t)ahc_inb(ahc, port+4)) << 32)
| (((uint64_t)ahc_inb(ahc, port+5)) << 40)
| (((uint64_t)ahc_inb(ahc, port+6)) << 48)
--
2.30.2
From: Peter Collingbourne <[email protected]>
commit 0db282ba2c12c1515d490d14a1ff696643ab0f1b upstream.
This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs. This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail. To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241
Fixes: c47174fc362a ("userfaultfd: selftest")
Co-developed-by: Lokesh Gidra <[email protected]>
Signed-off-by: Lokesh Gidra <[email protected]>
Signed-off-by: Peter Collingbourne <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Alistair Delva <[email protected]>
Cc: William McVicker <[email protected]>
Cc: Evgenii Stepanov <[email protected]>
Cc: Mitch Phillips <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: <[email protected]> [5.4]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/vm/userfaultfd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/vm/userfaultfd.c
+++ b/tools/testing/selftests/vm/userfaultfd.c
@@ -129,8 +129,10 @@ static int anon_release_pages(char *rel_
static void anon_allocate_area(void **alloc_area)
{
- if (posix_memalign(alloc_area, page_size, nr_pages * page_size)) {
- fprintf(stderr, "out of memory\n");
+ *alloc_area = mmap(NULL, nr_pages * page_size, PROT_READ | PROT_WRITE,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (*alloc_area == MAP_FAILED)
+ fprintf(stderr, "mmap of anonymous memory failed");
*alloc_area = NULL;
}
}
From: Yoshihiro Shimoda <[email protected]>
commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22
To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().
Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <[email protected]> # v4.4+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/renesas_usbhs/fifo.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -112,6 +112,8 @@ static struct dma_chan *usbhsf_dma_chan_
#define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1)
#define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0)
static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
{
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -135,6 +137,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct u
dmaengine_terminate_all(chan);
usbhsf_fifo_clear(pipe, fifo);
usbhsf_dma_unmap(pkt);
+ } else {
+ if (usbhs_pipe_is_dir_in(pipe))
+ usbhsf_rx_irq_ctrl(pipe, 0);
+ else
+ usbhsf_tx_irq_ctrl(pipe, 0);
}
usbhs_pipe_running(pipe, 0);
From: Vasily Gorbik <[email protected]>
commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.
s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.
The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]
Corresponding KASAN report:
BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
Read of size 4 at addr 0000000000001e08 by task migration/0/15
CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
Hardware name: IBM 3906 M04 704 (LPAR)
Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
Call Trace:
[<0000000001f77caa>] show_stack+0x16a/0x1d0
[<0000000001f8de42>] dump_stack+0x15a/0x1b0
[<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
[<000000000082b0ca>] kasan_report+0x152/0x1c0
[<00000000004cfd8e>] function_trace_call+0x316/0x3b0
[<0000000001fb7082>] ftrace_caller+0x7a/0x7e
[<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
[<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
[<000000000014605c>] ftrace_make_call+0xb4/0x1f8
[<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
[<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
[<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
[<000000000042395c>] multi_cpu_stop+0x224/0x3e0
[<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
[<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
[<00000000002329ea>] kthread+0x342/0x408
[<00000000001066b2>] __ret_from_fork+0x92/0xf0
[<0000000001fb57fa>] ret_from_fork+0xa/0x30
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
>0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
^
0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
==================================================================
To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().
Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: [email protected]
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/ftrace.h | 1 +
arch/s390/kernel/ftrace.c | 2 ++
arch/s390/kernel/mcount.S | 4 ++--
3 files changed, 5 insertions(+), 2 deletions(-)
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -20,6 +20,7 @@ void ftrace_caller(void);
extern char ftrace_graph_caller_end;
extern unsigned long ftrace_plt;
+extern void *ftrace_func;
struct dyn_arch_ftrace { };
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -57,6 +57,7 @@
* > brasl %r0,ftrace_caller # offset 0
*/
+void *ftrace_func __read_mostly = ftrace_stub;
unsigned long ftrace_plt;
static inline void ftrace_generate_orig_insn(struct ftrace_insn *insn)
@@ -166,6 +167,7 @@ int ftrace_make_call(struct dyn_ftrace *
int ftrace_update_ftrace_func(ftrace_func_t func)
{
+ ftrace_func = func;
return 0;
}
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -60,13 +60,13 @@ ENTRY(ftrace_caller)
#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
aghik %r2,%r0,-MCOUNT_INSN_SIZE
lgrl %r4,function_trace_op
- lgrl %r1,ftrace_trace_function
+ lgrl %r1,ftrace_func
#else
lgr %r2,%r0
aghi %r2,-MCOUNT_INSN_SIZE
larl %r4,function_trace_op
lg %r4,0(%r4)
- larl %r1,ftrace_trace_function
+ larl %r1,ftrace_func
lg %r1,0(%r1)
#endif
lgr %r3,%r14
From: Nguyen Dinh Phi <[email protected]>
[ Upstream commit 517a16b1a88bdb6b530f48d5d153478b2552d9a8 ]
Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().
Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.
Signed-off-by: Nguyen Dinh Phi <[email protected]>
Reported-by: [email protected]
Fixes: 63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netrom/nr_timer.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/net/netrom/nr_timer.c b/net/netrom/nr_timer.c
index f0ecaec1ff3d..d1a0b7056743 100644
--- a/net/netrom/nr_timer.c
+++ b/net/netrom/nr_timer.c
@@ -125,11 +125,9 @@ static void nr_heartbeat_expiry(unsigned long param)
is accepted() it isn't 'dead' so doesn't get removed. */
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {
- sock_hold(sk);
bh_unlock_sock(sk);
nr_destroy_socket(sk);
- sock_put(sk);
- return;
+ goto out;
}
break;
@@ -150,6 +148,8 @@ static void nr_heartbeat_expiry(unsigned long param)
nr_start_heartbeat(sk);
bh_unlock_sock(sk);
+out:
+ sock_put(sk);
}
static void nr_t2timer_expiry(unsigned long param)
@@ -163,6 +163,7 @@ static void nr_t2timer_expiry(unsigned long param)
nr_enquiry_response(sk);
}
bh_unlock_sock(sk);
+ sock_put(sk);
}
static void nr_t4timer_expiry(unsigned long param)
@@ -172,6 +173,7 @@ static void nr_t4timer_expiry(unsigned long param)
bh_lock_sock(sk);
nr_sk(sk)->condition &= ~NR_COND_PEER_RX_BUSY;
bh_unlock_sock(sk);
+ sock_put(sk);
}
static void nr_idletimer_expiry(unsigned long param)
@@ -200,6 +202,7 @@ static void nr_idletimer_expiry(unsigned long param)
sock_set_flag(sk, SOCK_DEAD);
}
bh_unlock_sock(sk);
+ sock_put(sk);
}
static void nr_t1timer_expiry(unsigned long param)
@@ -212,8 +215,7 @@ static void nr_t1timer_expiry(unsigned long param)
case NR_STATE_1:
if (nr->n2count == nr->n2) {
nr_disconnect(sk, ETIMEDOUT);
- bh_unlock_sock(sk);
- return;
+ goto out;
} else {
nr->n2count++;
nr_write_internal(sk, NR_CONNREQ);
@@ -223,8 +225,7 @@ static void nr_t1timer_expiry(unsigned long param)
case NR_STATE_2:
if (nr->n2count == nr->n2) {
nr_disconnect(sk, ETIMEDOUT);
- bh_unlock_sock(sk);
- return;
+ goto out;
} else {
nr->n2count++;
nr_write_internal(sk, NR_DISCREQ);
@@ -234,8 +235,7 @@ static void nr_t1timer_expiry(unsigned long param)
case NR_STATE_3:
if (nr->n2count == nr->n2) {
nr_disconnect(sk, ETIMEDOUT);
- bh_unlock_sock(sk);
- return;
+ goto out;
} else {
nr->n2count++;
nr_requeue_frames(sk);
@@ -244,5 +244,7 @@ static void nr_t1timer_expiry(unsigned long param)
}
nr_start_t1timer(sk);
+out:
bh_unlock_sock(sk);
+ sock_put(sk);
}
--
2.30.2
From: Julian Sikorski <[email protected]>
commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start
Signed-off-by: Julian Sikorski <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_uas.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -58,6 +58,13 @@ UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+/* Reported-by: Julian Sikorski <[email protected]> */
+UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
+ "LaCie",
+ "Rugged USB3-FW",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/*
* Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
* commands in UAS mode. Observed with the 1.28 firmware; are there others?
From: Mathias Nyman <[email protected]>
commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.
The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.
This is the case for both U1 and U2 sytstem exit latencies and link states.
See USB 3.2 section 9.4.9 "Set Feature" for more details
Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.
If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.
Signed-off-by: Mathias Nyman <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 68 ++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 56 insertions(+), 12 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3904,6 +3904,47 @@ static int usb_set_lpm_timeout(struct us
}
/*
+ * Don't allow device intiated U1/U2 if the system exit latency + one bus
+ * interval is greater than the minimum service interval of any active
+ * periodic endpoint. See USB 3.2 section 9.4.9
+ */
+static bool usb_device_may_initiate_lpm(struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ unsigned int sel; /* us */
+ int i, j;
+
+ if (state == USB3_LPM_U1)
+ sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+ else if (state == USB3_LPM_U2)
+ sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+ else
+ return false;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_endpoint_descriptor *desc;
+ unsigned int interval;
+
+ intf = udev->actconfig->interface[i];
+ if (!intf)
+ continue;
+
+ for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) {
+ desc = &intf->cur_altsetting->endpoint[j].desc;
+
+ if (usb_endpoint_xfer_int(desc) ||
+ usb_endpoint_xfer_isoc(desc)) {
+ interval = (1 << (desc->bInterval - 1)) * 125;
+ if (sel + 125 > interval)
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+/*
* Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
* U1/U2 entry.
*
@@ -3975,20 +4016,23 @@ static void usb_enable_link_state(struct
* U1/U2_ENABLE
*/
if (udev->actconfig &&
- usb_set_device_initiated_lpm(udev, state, true) == 0) {
- if (state == USB3_LPM_U1)
- udev->usb3_lpm_u1_enabled = 1;
- else if (state == USB3_LPM_U2)
- udev->usb3_lpm_u2_enabled = 1;
- } else {
- /* Don't request U1/U2 entry if the device
- * cannot transition to U1/U2.
- */
- usb_set_lpm_timeout(udev, state, 0);
- hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ usb_device_may_initiate_lpm(udev, state)) {
+ if (usb_set_device_initiated_lpm(udev, state, true)) {
+ /*
+ * Request to enable device initiated U1/U2 failed,
+ * better to turn off lpm in this case.
+ */
+ usb_set_lpm_timeout(udev, state, 0);
+ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ return;
+ }
}
-}
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 1;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 1;
+}
/*
* Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
* U1/U2 entry.
From: Wolfgang Bumiller <[email protected]>
commit a019abd8022061b917da767cd1a66ed823724eab upstream.
Since commit 2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.
Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.
Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.
Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_if.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -485,7 +485,7 @@ int br_add_if(struct net_bridge *br, str
struct net_bridge_port *p;
int err = 0;
unsigned br_hr, dev_hr;
- bool changed_addr;
+ bool changed_addr, fdb_synced = false;
/* Don't allow bridging non-ethernet like devices, or DSA-enabled
* master network devices since the bridge layer rx_handler prevents
@@ -555,6 +555,19 @@ int br_add_if(struct net_bridge *br, str
list_add_rcu(&p->list, &br->port_list);
nbp_update_port_count(br);
+ if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) {
+ /* When updating the port count we also update all ports'
+ * promiscuous mode.
+ * A port leaving promiscuous mode normally gets the bridge's
+ * fdb synced to the unicast filter (if supported), however,
+ * `br_port_clear_promisc` does not distinguish between
+ * non-promiscuous ports and *new* ports, so we need to
+ * sync explicitly here.
+ */
+ fdb_synced = br_fdb_sync_static(br, p) == 0;
+ if (!fdb_synced)
+ netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n");
+ }
netdev_update_features(br->dev);
@@ -595,6 +608,8 @@ int br_add_if(struct net_bridge *br, str
return 0;
err7:
+ if (fdb_synced)
+ br_fdb_unsync_static(br, p);
list_del_rcu(&p->list);
br_fdb_delete_by_port(br, p, 0, 1);
nbp_update_port_count(br);
From: Marcelo Henrique Cerri <[email protected]>
[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]
Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.
Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: David Disseldorp <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Marcelo Henrique Cerri <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Souza Cascardo <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/proc/base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 005d4cb2347e..5f68454cf421 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -841,7 +841,7 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
while (count > 0) {
- int this_len = min_t(int, count, PAGE_SIZE);
+ size_t this_len = min_t(size_t, count, PAGE_SIZE);
if (write && copy_from_user(page, buf, this_len)) {
copied = -EFAULT;
--
2.30.2
From: Markus Boehme <[email protected]>
commit 09cfae9f13d51700b0fecf591dcd658fc5375428 upstream.
When receiving a packet with multiple fragments, hardware may still
touch the first fragment until the entire packet has been received. The
driver therefore keeps the first fragment mapped for DMA until end of
packet has been asserted, and delays its dma_sync call until then.
The driver tries to fit multiple receive buffers on one page. When using
3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned
off/build_skb is being used) on an architecture with 4K pages, the
driver allocates an order 1 compound page and uses one page per receive
buffer. To determine the correct offset for a delayed DMA sync of the
first fragment of a multi-fragment packet, the driver then cannot just
use PAGE_MASK on the DMA address but has to construct a mask based on
the actual size of the backing page.
Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration
will always sync the first page of a compound page. With the SWIOTLB
enabled this can lead to corrupted packets (zeroed out first fragment,
re-used garbage from another packet) and various consequences, such as
slow/stalling data transfers and connection resets. For example, testing
on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled
(e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle
out without this patch.
Cc: [email protected]
Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path")
Signed-off-by: Markus Boehme <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1872,7 +1872,8 @@ static void ixgbe_dma_sync_frag(struct i
struct sk_buff *skb)
{
if (ring_uses_build_skb(rx_ring)) {
- unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+ unsigned long mask = (unsigned long)ixgbe_rx_pg_size(rx_ring) - 1;
+ unsigned long offset = (unsigned long)(skb->data) & mask;
dma_sync_single_range_for_cpu(rx_ring->dev,
IXGBE_CB(skb)->dma,
From: Marco De Marco <[email protected]>
commit 94b619a07655805a1622484967754f5848640456 upstream.
The patch is meant to support LARA-R6 Cat 1 module family.
Module USB ID:
Vendor ID: 0x05c6
Product ID: 0x90fA
Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)
Signed-off-by: Marco De Marco <[email protected]>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -241,6 +241,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_UC15 0x9090
/* These u-blox products use Qualcomm's vendor ID */
#define UBLOX_PRODUCT_R410M 0x90b2
+#define UBLOX_PRODUCT_R6XX 0x90fa
/* These Yuga products use Qualcomm's vendor ID */
#define YUGA_PRODUCT_CLM920_NC5 0x9625
@@ -1104,6 +1105,8 @@ static const struct usb_device_id option
/* u-blox products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
.driver_info = RSVD(1) | RSVD(3) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+ .driver_info = RSVD(3) },
/* Quectel products using Quectel vendor ID */
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
.driver_info = NUMEP2 },
From: Christophe JAILLET <[email protected]>
commit 680ec0549a055eb464dce6ffb4bfb736ef87236e upstream
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the
error handling path of the probe function, as already done in the remove
function
Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.1620587472.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1057,11 +1057,13 @@ static int dspi_probe(struct platform_de
ret = spi_register_master(master);
if (ret != 0) {
dev_err(&pdev->dev, "Problem registering DSPI master\n");
- goto out_free_irq;
+ goto out_release_dma;
}
return ret;
+out_release_dma:
+ dspi_release_dma(dspi);
out_free_irq:
if (dspi->irq)
free_irq(dspi->irq, dspi);
From: Florian Fainelli <[email protected]>
commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream.
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <[email protected]>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2789,15 +2789,21 @@ static void bcmgenet_set_hw_addr(struct
/* Returns a reusable dma control register value */
static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
{
+ unsigned int i;
u32 reg;
u32 dma_ctrl;
/* disable DMA */
dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+ for (i = 0; i < priv->hw_params->tx_queues; i++)
+ dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
reg &= ~dma_ctrl;
bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
+ dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+ for (i = 0; i < priv->hw_params->rx_queues; i++)
+ dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
reg &= ~dma_ctrl;
bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
From: Mathias Nyman <[email protected]>
[commit b1adc42d440df3233255e313a45ab7e9b2b74096 upstream]
In several event handlers we need to find the right endpoint
structure from slot_id and ep_index in the event.
Add a helper for this, check that slot_id and ep_index are valid.
Cc: [email protected]
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Carsten Schmid <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 58 +++++++++++++++++++++++++++++++++----------
drivers/usb/host/xhci.h | 3 +-
2 files changed, 47 insertions(+), 14 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -444,6 +444,26 @@ static void ring_doorbell_for_active_rin
}
}
+static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
+ unsigned int slot_id,
+ unsigned int ep_index)
+{
+ if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
+ xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
+ return NULL;
+ }
+ if (ep_index >= EP_CTX_PER_DEV) {
+ xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
+ return NULL;
+ }
+ if (!xhci->devs[slot_id]) {
+ xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
+ return NULL;
+ }
+
+ return &xhci->devs[slot_id]->eps[ep_index];
+}
+
/* Get the right ring for the given slot_id, ep_index and stream_id.
* If the endpoint supports streams, boundary check the URB's stream ID.
* If the endpoint doesn't support streams, return the singular endpoint ring.
@@ -454,7 +474,10 @@ struct xhci_ring *xhci_triad_to_transfer
{
struct xhci_virt_ep *ep;
- ep = &xhci->devs[slot_id]->eps[ep_index];
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep)
+ return NULL;
+
/* Common case: no streams */
if (!(ep->ep_state & EP_HAS_STREAMS))
return ep->ring;
@@ -729,11 +752,14 @@ static void xhci_handle_cmd_stop_ep(stru
memset(&deq_state, 0, sizeof(deq_state));
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep)
+ return;
+
vdev = xhci->devs[slot_id];
ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
trace_xhci_handle_cmd_stop_ep(ep_ctx);
- ep = &xhci->devs[slot_id]->eps[ep_index];
last_unlinked_td = list_last_entry(&ep->cancelled_td_list,
struct xhci_td, cancelled_td_list);
@@ -1057,9 +1083,11 @@ static void xhci_handle_cmd_set_deq(stru
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
- dev = xhci->devs[slot_id];
- ep = &dev->eps[ep_index];
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep)
+ return;
+ dev = xhci->devs[slot_id];
ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
if (!ep_ring) {
xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
@@ -1132,9 +1160,9 @@ static void xhci_handle_cmd_set_deq(stru
}
cleanup:
- dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
- dev->eps[ep_index].queued_deq_seg = NULL;
- dev->eps[ep_index].queued_deq_ptr = NULL;
+ ep->ep_state &= ~SET_DEQ_PENDING;
+ ep->queued_deq_seg = NULL;
+ ep->queued_deq_ptr = NULL;
/* Restart any rings with pending URBs */
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
@@ -1143,10 +1171,15 @@ static void xhci_handle_cmd_reset_ep(str
union xhci_trb *trb, u32 cmd_comp_code)
{
struct xhci_virt_device *vdev;
+ struct xhci_virt_ep *ep;
struct xhci_ep_ctx *ep_ctx;
unsigned int ep_index;
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep)
+ return;
+
vdev = xhci->devs[slot_id];
ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
trace_xhci_handle_cmd_reset_ep(ep_ctx);
@@ -1176,7 +1209,7 @@ static void xhci_handle_cmd_reset_ep(str
xhci_ring_cmd_db(xhci);
} else {
/* Clear our internal halted state */
- xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
+ ep->ep_state &= ~EP_HALTED;
}
}
@@ -2352,14 +2385,13 @@ static int handle_tx_event(struct xhci_h
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
ep_trb_dma = le64_to_cpu(event->buffer);
- xdev = xhci->devs[slot_id];
- if (!xdev) {
- xhci_err(xhci, "ERROR Transfer event pointed to bad slot %u\n",
- slot_id);
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep) {
+ xhci_err(xhci, "ERROR Invalid Transfer event\n");
goto err_out;
}
- ep = &xdev->eps[ep_index];
+ xdev = xhci->devs[slot_id];
ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -991,6 +991,7 @@ struct xhci_interval_bw_table {
unsigned int ss_bw_out;
};
+#define EP_CTX_PER_DEV 31
struct xhci_virt_device {
struct usb_device *udev;
@@ -1005,7 +1006,7 @@ struct xhci_virt_device {
struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
struct xhci_container_ctx *in_ctx;
- struct xhci_virt_ep eps[31];
+ struct xhci_virt_ep eps[EP_CTX_PER_DEV];
u8 fake_port;
u8 real_port;
struct xhci_interval_bw_table *bw_table;
From: Riccardo Mancini <[email protected]>
[ Upstream commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5 ]
ASan reports a memory leak of nsinfo during the execution of
# perf test "31: Lookup mmap thread"
The leak is caused by a refcounted variable being replaced without
dropping the refcount.
This patch makes sure that the refcnt of nsinfo is decreased whenever a
refcounted variable is replaced with a new value.
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: bf2e710b3cb8445c ("perf maps: Lookup maps in both intitial mountns and inner mountns.")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/map.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 9d42a2821ecb..d7c34feef58e 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -216,6 +216,8 @@ struct map *map__new(struct machine *machine, u64 start, u64 len,
if (type != MAP__FUNCTION)
dso__set_loaded(dso, map->type);
}
+
+ nsinfo__put(dso->nsinfo);
dso->nsinfo = nsi;
dso__put(dso);
}
--
2.30.2
From: Mark Tomlinson <[email protected]>
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.
The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.
To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <[email protected]>
Signed-off-by: Mark Tomlinson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/max3421-hcd.c | 44 +++++++++++++----------------------------
1 file changed, 14 insertions(+), 30 deletions(-)
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -149,8 +149,6 @@ struct max3421_hcd {
*/
struct urb *curr_urb;
enum scheduling_pass sched_pass;
- struct usb_device *loaded_dev; /* dev that's loaded into the chip */
- int loaded_epnum; /* epnum whose toggles are loaded */
int urb_done; /* > 0 -> no errors, < 0: errno */
size_t curr_len;
u8 hien;
@@ -488,39 +486,17 @@ max3421_set_speed(struct usb_hcd *hcd, s
* Caller must NOT hold HCD spinlock.
*/
static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
- int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
{
- struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
- int old_epnum, same_ep, rcvtog, sndtog;
- struct usb_device *old_dev;
+ int rcvtog, sndtog;
u8 hctl;
- old_dev = max3421_hcd->loaded_dev;
- old_epnum = max3421_hcd->loaded_epnum;
-
- same_ep = (dev == old_dev && epnum == old_epnum);
- if (same_ep && !force_toggles)
- return;
-
- if (old_dev && !same_ep) {
- /* save the old end-points toggles: */
- u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
- rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
- sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
- /* no locking: HCD (i.e., we) own toggles, don't we? */
- usb_settoggle(old_dev, old_epnum, 0, rcvtog);
- usb_settoggle(old_dev, old_epnum, 1, sndtog);
- }
/* setup new endpoint's toggle bits: */
rcvtog = usb_gettoggle(dev, epnum, 0);
sndtog = usb_gettoggle(dev, epnum, 1);
hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
- max3421_hcd->loaded_epnum = epnum;
spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
/*
@@ -528,7 +504,6 @@ max3421_set_address(struct usb_hcd *hcd,
* address-assignment so it's best to just always load the
* address whenever the end-point changed/was forced.
*/
- max3421_hcd->loaded_dev = dev;
spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
}
@@ -663,7 +638,7 @@ max3421_select_and_start_urb(struct usb_
struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
struct urb *urb, *curr_urb = NULL;
struct max3421_ep *max3421_ep;
- int epnum, force_toggles = 0;
+ int epnum;
struct usb_host_endpoint *ep;
struct list_head *pos;
unsigned long flags;
@@ -773,7 +748,6 @@ done:
usb_settoggle(urb->dev, epnum, 0, 1);
usb_settoggle(urb->dev, epnum, 1, 1);
max3421_ep->pkt_state = PKT_STATE_SETUP;
- force_toggles = 1;
} else
max3421_ep->pkt_state = PKT_STATE_TRANSFER;
}
@@ -781,7 +755,7 @@ done:
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
max3421_ep->last_active = max3421_hcd->frame_number;
- max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+ max3421_set_address(hcd, urb->dev, epnum);
max3421_set_speed(hcd, urb->dev);
max3421_next_transfer(hcd, 0);
return 1;
@@ -1376,6 +1350,16 @@ max3421_urb_done(struct usb_hcd *hcd)
status = 0;
urb = max3421_hcd->curr_urb;
if (urb) {
+ /* save the old end-points toggles: */
+ u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+ int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+ int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+ int epnum = usb_endpoint_num(&urb->ep->desc);
+
+ /* no locking: HCD (i.e., we) own toggles, don't we? */
+ usb_settoggle(urb->dev, epnum, 0, rcvtog);
+ usb_settoggle(urb->dev, epnum, 1, sndtog);
+
max3421_hcd->curr_urb = NULL;
spin_lock_irqsave(&max3421_hcd->lock, flags);
usb_hcd_unlink_urb_from_ep(hcd, urb);
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ]
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.
Link: https://lore.kernel.org/r/[email protected]
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_sbc.c | 35 ++++++++++++++++----------------
1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 750a04ed0e93..bf05701f78b3 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -38,7 +38,7 @@
#include "target_core_alua.h"
static sense_reason_t
-sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char *, u32, bool);
+sbc_check_prot(struct se_device *, struct se_cmd *, unsigned char, u32, bool);
static sense_reason_t sbc_execute_unmap(struct se_cmd *cmd);
static sense_reason_t
@@ -292,14 +292,14 @@ static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
}
static sense_reason_t
-sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *ops)
+sbc_setup_write_same(struct se_cmd *cmd, unsigned char flags, struct sbc_ops *ops)
{
struct se_device *dev = cmd->se_dev;
sector_t end_lba = dev->transport->get_blocks(dev) + 1;
unsigned int sectors = sbc_get_write_same_sectors(cmd);
sense_reason_t ret;
- if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
+ if ((flags & 0x04) || (flags & 0x02)) {
pr_err("WRITE_SAME PBDATA and LBDATA"
" bits not supported for Block Discard"
" Emulation\n");
@@ -321,7 +321,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
}
/* We always have ANC_SUP == 0 so setting ANCHOR is always an error */
- if (flags[0] & 0x10) {
+ if (flags & 0x10) {
pr_warn("WRITE SAME with ANCHOR not supported\n");
return TCM_INVALID_CDB_FIELD;
}
@@ -329,7 +329,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
* Special case for WRITE_SAME w/ UNMAP=1 that ends up getting
* translated into block discard requests within backend code.
*/
- if (flags[0] & 0x08) {
+ if (flags & 0x08) {
if (!ops->execute_unmap)
return TCM_UNSUPPORTED_SCSI_OPCODE;
@@ -344,7 +344,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
if (!ops->execute_write_same)
return TCM_UNSUPPORTED_SCSI_OPCODE;
- ret = sbc_check_prot(dev, cmd, &cmd->t_task_cdb[0], sectors, true);
+ ret = sbc_check_prot(dev, cmd, flags >> 5, sectors, true);
if (ret)
return ret;
@@ -702,10 +702,9 @@ sbc_set_prot_op_checks(u8 protect, bool fabric_prot, enum target_prot_type prot_
}
static sense_reason_t
-sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
+sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char protect,
u32 sectors, bool is_write)
{
- u8 protect = cdb[1] >> 5;
int sp_ops = cmd->se_sess->sup_prot_ops;
int pi_prot_type = dev->dev_attrib.pi_prot_type;
bool fabric_prot = false;
@@ -753,7 +752,7 @@ sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
/* Fallthrough */
default:
pr_err("Unable to determine pi_prot_type for CDB: 0x%02x "
- "PROTECT: 0x%02x\n", cdb[0], protect);
+ "PROTECT: 0x%02x\n", cmd->t_task_cdb[0], protect);
return TCM_INVALID_CDB_FIELD;
}
@@ -828,7 +827,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
if (ret)
return ret;
@@ -842,7 +841,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
if (ret)
return ret;
@@ -856,7 +855,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, false);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, false);
if (ret)
return ret;
@@ -877,7 +876,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
if (ret)
return ret;
@@ -891,7 +890,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
if (ret)
return ret;
@@ -906,7 +905,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
if (sbc_check_dpofua(dev, cmd, cdb))
return TCM_INVALID_CDB_FIELD;
- ret = sbc_check_prot(dev, cmd, cdb, sectors, true);
+ ret = sbc_check_prot(dev, cmd, cdb[1] >> 5, sectors, true);
if (ret)
return ret;
@@ -965,7 +964,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
size = sbc_get_size(cmd, 1);
cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
- ret = sbc_setup_write_same(cmd, &cdb[10], ops);
+ ret = sbc_setup_write_same(cmd, cdb[10], ops);
if (ret)
return ret;
break;
@@ -1063,7 +1062,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
size = sbc_get_size(cmd, 1);
cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
- ret = sbc_setup_write_same(cmd, &cdb[1], ops);
+ ret = sbc_setup_write_same(cmd, cdb[1], ops);
if (ret)
return ret;
break;
@@ -1081,7 +1080,7 @@ sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops)
* Follow sbcr26 with WRITE_SAME (10) and check for the existence
* of byte 1 bit 3 UNMAP instead of original reserved field
*/
- ret = sbc_setup_write_same(cmd, &cdb[1], ops);
+ ret = sbc_setup_write_same(cmd, cdb[1], ops);
if (ret)
return ret;
break;
--
2.30.2
From: Nicholas Piggin <[email protected]>
commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.
Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].
Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.
Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: [email protected] # v3.10+
Reported-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kvm/book3s_rtas.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -243,6 +243,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *v
* value so we can restore it on the way out.
*/
orig_rets = args.rets;
+ if (be32_to_cpu(args.nargs) >= ARRAY_SIZE(args.args)) {
+ /*
+ * Don't overflow our args array: ensure there is room for
+ * at least rets[0] (even if the call specifies 0 nret).
+ *
+ * Each handler must then check for the correct nargs and nret
+ * values, but they may always return failure in rets[0].
+ */
+ rc = -EINVAL;
+ goto fail;
+ }
args.rets = &args.args[be32_to_cpu(args.nargs)];
mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
@@ -270,9 +281,17 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *v
fail:
/*
* We only get here if the guest has called RTAS with a bogus
- * args pointer. That means we can't get to the args, and so we
- * can't fail the RTAS call. So fail right out to userspace,
- * which should kill the guest.
+ * args pointer or nargs/nret values that would overflow the
+ * array. That means we can't get to the args, and so we can't
+ * fail the RTAS call. So fail right out to userspace, which
+ * should kill the guest.
+ *
+ * SLOF should actually pass the hcall return value from the
+ * rtas handler call in r3, so enter_rtas could be modified to
+ * return a failure indication in r3 and we could return such
+ * errors to the guest rather than failing to host userspace.
+ * However old guests that don't test for failure could then
+ * continue silently after errors, so for now we won't do this.
*/
return rc;
}
From: Mathias Nyman <[email protected]>
commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.
There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.
When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.
To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.
checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.
If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.
CPU0 CPU1
(hub thread) (xhci event handler)
xhci_hub_status_data()
status = bus_state->resuming_ports;
<Interrupt>
handle_port_status()
spin_lock()
bus_state->resuming_ports = 1
set_flag(HCD_FLAG_POLL_RH)
spin_unlock()
spin_lock()
if (!status)
clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()
Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread
Cc: <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1450,11 +1450,12 @@ int xhci_hub_status_data(struct usb_hcd
* Inform the usbcore about resume-in-progress by returning
* a non-zero value even if there are no status changes.
*/
+ spin_lock_irqsave(&xhci->lock, flags);
+
status = bus_state->resuming_ports;
mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
- spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
temp = readl(port_array[i]);
From: Doug Berger <[email protected]>
commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream.
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.
Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 16 ++--------------
drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 6 ------
2 files changed, 2 insertions(+), 20 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1158,7 +1158,8 @@ static void bcmgenet_power_up(struct bcm
switch (mode) {
case GENET_POWER_PASSIVE:
- reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS);
+ reg &= ~(EXT_PWR_DOWN_DLL | EXT_PWR_DOWN_BIAS |
+ EXT_ENERGY_DET_MASK);
if (GENET_IS_V5(priv)) {
reg &= ~(EXT_PWR_DOWN_PHY_EN |
EXT_PWR_DOWN_PHY_RD |
@@ -2913,12 +2914,6 @@ static int bcmgenet_open(struct net_devi
bcmgenet_set_hw_addr(priv, dev->dev_addr);
- if (priv->internal_phy) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg |= EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
/* Disable RX/TX DMA and flush TX queues */
dma_ctrl = bcmgenet_dma_disable(priv);
@@ -3676,7 +3671,6 @@ static int bcmgenet_resume(struct device
struct bcmgenet_priv *priv = netdev_priv(dev);
unsigned long dma_ctrl;
int ret;
- u32 reg;
if (!netif_running(dev))
return 0;
@@ -3712,12 +3706,6 @@ static int bcmgenet_resume(struct device
bcmgenet_set_hw_addr(priv, dev->dev_addr);
- if (priv->internal_phy) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg |= EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
if (priv->wolopts)
bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -166,12 +166,6 @@ int bcmgenet_wol_power_down_cfg(struct b
reg |= CMD_RX_EN;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
- if (priv->hw_params->flags & GENET_HAS_EXT) {
- reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT);
- reg &= ~EXT_ENERGY_DET_MASK;
- bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
- }
-
return 0;
}
From: Stephan Gerhold <[email protected]>
commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream
According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:
"Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
It is recommended [...] to use the range from ´01000b´ to ´01111b´
only in order to be compatible with future products."
However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.
Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.
[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf
Cc: Peter Meerwald <[email protected]>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/accel/bma180.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -50,7 +50,7 @@ struct bma180_part_info {
u8 int_reset_reg, int_reset_mask;
u8 sleep_reg, sleep_mask;
- u8 bw_reg, bw_mask;
+ u8 bw_reg, bw_mask, bw_offset;
u8 scale_reg, scale_mask;
u8 power_reg, power_mask, lowpower_val;
u8 int_enable_reg, int_enable_mask;
@@ -106,6 +106,7 @@ struct bma180_part_info {
#define BMA250_RANGE_MASK GENMASK(3, 0) /* Range of accel values */
#define BMA250_BW_MASK GENMASK(4, 0) /* Accel bandwidth */
+#define BMA250_BW_OFFSET 8
#define BMA250_SUSPEND_MASK BIT(7) /* chip will sleep */
#define BMA250_LOWPOWER_MASK BIT(6)
#define BMA250_DATA_INTEN_MASK BIT(4)
@@ -243,7 +244,8 @@ static int bma180_set_bw(struct bma180_d
for (i = 0; i < data->part_info->num_bw; ++i) {
if (data->part_info->bw_table[i] == val) {
ret = bma180_set_bits(data, data->part_info->bw_reg,
- data->part_info->bw_mask, i);
+ data->part_info->bw_mask,
+ i + data->part_info->bw_offset);
if (ret) {
dev_err(&data->client->dev,
"failed to set bandwidth\n");
@@ -662,6 +664,7 @@ static const struct bma180_part_info bma
.sleep_mask = BMA250_SUSPEND_MASK,
.bw_reg = BMA250_BW_REG,
.bw_mask = BMA250_BW_MASK,
+ .bw_offset = BMA250_BW_OFFSET,
.scale_reg = BMA250_RANGE_REG,
.scale_mask = BMA250_RANGE_MASK,
.power_reg = BMA250_POWER_REG,
From: Haoran Luo <[email protected]>
commit 67f0d6d9883c13174669f88adac4f0ee656cc16a upstream.
The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when
"head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to
the same buffer page, whose "buffer_data_page" is empty and "read" field
is non-zero.
An error scenario could be constructed as followed (kernel perspective):
1. All pages in the buffer has been accessed by reader(s) so that all of
them will have non-zero "read" field.
2. Read and clear all buffer pages so that "rb_num_of_entries()" will
return 0 rendering there's no more data to read. It is also required
that the "read_page", "commit_page" and "tail_page" points to the same
page, while "head_page" is the next page of them.
3. Invoke "ring_buffer_lock_reserve()" with large enough "length"
so that it shot pass the end of current tail buffer page. Now the
"head_page", "commit_page" and "tail_page" points to the same page.
4. Discard current event with "ring_buffer_discard_commit()", so that
"head_page", "commit_page" and "tail_page" points to a page whose buffer
data page is now empty.
When the error scenario has been constructed, "tracing_read_pipe" will
be trapped inside a deadloop: "trace_empty()" returns 0 since
"rb_per_cpu_empty()" returns 0 when it hits the CPU containing such
constructed ring buffer. Then "trace_find_next_entry_inc()" always
return NULL since "rb_num_of_entries()" reports there's no more entry
to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking
"tracing_read_pipe" back to the start of the "waitagain" loop.
I've also written a proof-of-concept script to construct the scenario
and trigger the bug automatically, you can use it to trace and validate
my reasoning above:
https://github.com/aegistudio/RingBufferDetonator.git
Tests has been carried out on linux kernel 5.14-rc2
(2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version
of kernel (for testing whether my update fixes the bug) and
some older kernels (for range of affected kernels). Test result is
also attached to the proof-of-concept repository.
Link: https://lore.kernel.org/linux-trace-devel/YPaNxsIlb2yjSi5Y@aegistudio/
Link: https://lore.kernel.org/linux-trace-devel/YPgrN85WL9VyrZ55@aegistudio
Cc: [email protected]
Fixes: bf41a158cacba ("ring-buffer: make reentrant")
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Haoran Luo <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ring_buffer.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3054,10 +3054,30 @@ static bool rb_per_cpu_empty(struct ring
if (unlikely(!head))
return true;
- return reader->read == rb_page_commit(reader) &&
- (commit == reader ||
- (commit == head &&
- head->read == rb_page_commit(commit)));
+ /* Reader should exhaust content in reader page */
+ if (reader->read != rb_page_commit(reader))
+ return false;
+
+ /*
+ * If writers are committing on the reader page, knowing all
+ * committed content has been read, the ring buffer is empty.
+ */
+ if (commit == reader)
+ return true;
+
+ /*
+ * If writers are committing on a page other than reader page
+ * and head page, there should always be content to read.
+ */
+ if (commit != head)
+ return false;
+
+ /*
+ * Writers are committing on the head page, we just need
+ * to care about there're committed data, and the reader will
+ * swap reader page with head page when it is to read data.
+ */
+ return rb_page_commit(commit) == 0;
}
/**
From: David Sterba <[email protected]>
commit f2165627319ffd33a6217275e5690b1ab5c45763 upstream
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: [email protected] # 4.4+
Signed-off-by: David Sterba <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -540,7 +540,7 @@ again:
* inode has not been flagged as nocompress. This flag can
* change at any time if we discover bad compression ratios.
*/
- if (inode_need_compress(inode, start, end)) {
+ if (nr_pages > 1 && inode_need_compress(inode, start, end)) {
WARN_ON(pages);
pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
if (!pages) {
From: Pavel Skripkin <[email protected]>
commit c78eaeebe855fd93f2e77142ffd0404a54070d84 upstream.
In case of netdev registration failure the code path will
jump to init_fail label:
init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;
So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/moxa/moxart_ether.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -538,10 +538,8 @@ static int moxart_mac_probe(struct platf
SET_NETDEV_DEV(ndev, &pdev->dev);
ret = register_netdev(ndev);
- if (ret) {
- free_netdev(ndev);
+ if (ret)
goto init_fail;
- }
netdev_dbg(ndev, "%s: IRQ=%d address=%pM\n",
__func__, ndev->irq, ndev->dev_addr);
From: Pavel Skripkin <[email protected]>
commit ad297cd2db8953e2202970e9504cab247b6c7cb4 upstream.
adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qualcomm/emac/emac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -765,12 +765,13 @@ static int emac_remove(struct platform_d
put_device(&adpt->phydev->mdio.dev);
mdiobus_unregister(adpt->mii_bus);
- free_netdev(netdev);
if (adpt->phy.digital)
iounmap(adpt->phy.digital);
iounmap(adpt->phy.base);
+ free_netdev(netdev);
+
return 0;
}
From: Pavel Skripkin <[email protected]>
commit 0336f8ffece62f882ab3012820965a786a983f70 upstream.
priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ti/tlan.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/ethernet/ti/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -313,9 +313,8 @@ static void tlan_remove_one(struct pci_d
pci_release_regions(pdev);
#endif
- free_netdev(dev);
-
cancel_work_sync(&priv->tlan_tqueue);
+ free_netdev(dev);
}
static void tlan_start(struct net_device *dev)
From: Huang Pei <[email protected]>
This reverts commit 920a42d8b854b1f112aef97a21f0549918889442 which is
commit commit ed914d48b6a1040d1039d371b56273d422c0081e upstream.
Commit b2b29d6d011944 (mm: account PMD tables like PTE tables) is
introduced between v5.9 and v5.10, so this fix (commit 002d8b395fa1)
should NOT apply to any pre-5.10 branch.
Signed-off-by: Huang Pei <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/pgalloc.h | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -93,15 +93,11 @@ do { \
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
- pmd_t *pmd = NULL;
- struct page *pg;
+ pmd_t *pmd;
- pg = alloc_pages(GFP_KERNEL | __GFP_ACCOUNT, PMD_ORDER);
- if (pg) {
- pgtable_pmd_page_ctor(pg);
- pmd = (pmd_t *)page_address(pg);
+ pmd = (pmd_t *) __get_free_pages(GFP_KERNEL, PMD_ORDER);
+ if (pmd)
pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
- }
return pmd;
}
From: Minas Harutyunyan <[email protected]>
commit d53dc38857f6dbefabd9eecfcbf67b6eac9a1ef4 upstream.
Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.
For DDMA in function dwc2_hsotg_complete_in() does not need to send
zlp.
Tested by USBCV MSC tests.
Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers")
Cc: stable <[email protected]>
Signed-off-by: Minas Harutyunyan <[email protected]>
Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/gadget.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2702,12 +2702,14 @@ static void dwc2_hsotg_complete_in(struc
return;
}
- /* Zlp for all endpoints, for ep0 only in DATA IN stage */
+ /* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */
if (hs_ep->send_zlp) {
- dwc2_hsotg_program_zlp(hsotg, hs_ep);
hs_ep->send_zlp = 0;
- /* transfer will be completed on next complete interrupt */
- return;
+ if (!using_desc_dma(hsotg)) {
+ dwc2_hsotg_program_zlp(hsotg, hs_ep);
+ /* transfer will be completed on next complete interrupt */
+ return;
+ }
}
if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {
From: John Keeping <[email protected]>
commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.
Signed-off-by: John Keeping <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -159,6 +159,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
+ { USB_DEVICE(0x10C4, 0x8A5B) }, /* CEL EM3588 ZigBee USB Stick */
{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
From: Charles Baylis <[email protected]>
commit 3abab27c322e0f2acf981595aa8040c9164dc9fb upstream.
drm: Return -ENOTTY for non-drm ioctls
Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number
which doesn't relate to the drm subsystem.
Glibc uses the TCGETS ioctl to implement isatty(), and without this
change isatty() returns it incorrectly returns true for drm devices.
To test run this command:
$ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0
which shows "is a tty" without this patch.
This may also modify memory which the userspace application is not
expecting.
Signed-off-by: Charles Baylis <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_ioctl.c | 3 +++
include/drm/drm_ioctl.h | 1 +
2 files changed, 4 insertions(+)
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -776,6 +776,9 @@ long drm_ioctl(struct file *filp,
if (drm_dev_is_unplugged(dev))
return -ENODEV;
+ if (DRM_IOCTL_TYPE(cmd) != DRM_IOCTL_BASE)
+ return -ENOTTY;
+
is_driver_ioctl = nr >= DRM_COMMAND_BASE && nr < DRM_COMMAND_END;
if (is_driver_ioctl) {
--- a/include/drm/drm_ioctl.h
+++ b/include/drm/drm_ioctl.h
@@ -68,6 +68,7 @@ typedef int drm_ioctl_compat_t(struct fi
unsigned long arg);
#define DRM_IOCTL_NR(n) _IOC_NR(n)
+#define DRM_IOCTL_TYPE(n) _IOC_TYPE(n)
#define DRM_MAJOR 226
/**
From: Takashi Iwai <[email protected]>
commit 1c2b9519159b470ef24b2638f4794e86e2952ab7 upstream.
SB16 CSP driver may hit potentially a typical ABBA deadlock in two
code paths:
In snd_sb_csp_stop():
spin_lock_irqsave(&p->chip->mixer_lock, flags);
spin_lock(&p->chip->reg_lock);
In snd_sb_csp_load():
spin_lock_irqsave(&p->chip->reg_lock, flags);
spin_lock(&p->chip->mixer_lock);
Also the similar pattern is seen in snd_sb_csp_start().
Although the practical impact is very small (those states aren't
triggered in the same running state and this happens only on a real
hardware, decades old ISA sound boards -- which must be very difficult
to find nowadays), it's a real scenario and has to be fixed.
This patch addresses those deadlocks by splitting the locks in
snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested
locks.
Reported-by: Jia-Ju Bai <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/sb/sb16_csp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -828,6 +828,7 @@ static int snd_sb_csp_start(struct snd_s
mixR = snd_sbmixer_read(p->chip, SB_DSP4_PCM_DEV + 1);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL & 0x7);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR & 0x7);
+ spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
spin_lock(&p->chip->reg_lock);
set_mode_register(p->chip, 0xc0); /* c0 = STOP */
@@ -867,6 +868,7 @@ static int snd_sb_csp_start(struct snd_s
spin_unlock(&p->chip->reg_lock);
/* restore PCM volume */
+ spin_lock_irqsave(&p->chip->mixer_lock, flags);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR);
spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
@@ -892,6 +894,7 @@ static int snd_sb_csp_stop(struct snd_sb
mixR = snd_sbmixer_read(p->chip, SB_DSP4_PCM_DEV + 1);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL & 0x7);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR & 0x7);
+ spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
spin_lock(&p->chip->reg_lock);
if (p->running & SNDRV_SB_CSP_ST_QSOUND) {
@@ -906,6 +909,7 @@ static int snd_sb_csp_stop(struct snd_sb
spin_unlock(&p->chip->reg_lock);
/* restore PCM volume */
+ spin_lock_irqsave(&p->chip->mixer_lock, flags);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV, mixL);
snd_sbmixer_write(p->chip, SB_DSP4_PCM_DEV + 1, mixR);
spin_unlock_irqrestore(&p->chip->mixer_lock, flags);
From: Gustavo A. R. Silva <[email protected]>
commit 8d4abca95ecc82fc8c41912fa0085281f19cc29f upstream.
Fix an 11-year old bug in ngene_command_config_free_buf() while
addressing the following warnings caught with -Warray-bounds:
arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]
The problem is that the original code is trying to copy 6 bytes of
data into a one-byte size member _config_ of the wrong structue
FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a
legitimate compiler warning because memcpy() overruns the length
of &com.cmd.ConfigureBuffers.config. It seems that the right
structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains
6 more members apart from the header _hdr_. Also, the name of
the function ngene_command_config_free_buf() suggests that the actual
intention is to ConfigureFreeBuffers, instead of ConfigureBuffers
(which takes place in the function ngene_command_config_buf(), above).
Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS
into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as
the destination address, instead of &com.cmd.ConfigureBuffers.config,
when calling memcpy().
This also helps with the ongoing efforts to globally enable
-Warray-bounds and get us closer to being able to tighten the
FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in")
Cc: [email protected]
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/pci/ngene/ngene-core.c | 2 +-
drivers/media/pci/ngene/ngene.h | 14 ++++++++------
2 files changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/media/pci/ngene/ngene-core.c
+++ b/drivers/media/pci/ngene/ngene-core.c
@@ -398,7 +398,7 @@ static int ngene_command_config_free_buf
com.cmd.hdr.Opcode = CMD_CONFIGURE_FREE_BUFFER;
com.cmd.hdr.Length = 6;
- memcpy(&com.cmd.ConfigureBuffers.config, config, 6);
+ memcpy(&com.cmd.ConfigureFreeBuffers.config, config, 6);
com.in_len = 6;
com.out_len = 0;
--- a/drivers/media/pci/ngene/ngene.h
+++ b/drivers/media/pci/ngene/ngene.h
@@ -403,12 +403,14 @@ enum _BUFFER_CONFIGS {
struct FW_CONFIGURE_FREE_BUFFERS {
struct FW_HEADER hdr;
- u8 UVI1_BufferLength;
- u8 UVI2_BufferLength;
- u8 TVO_BufferLength;
- u8 AUD1_BufferLength;
- u8 AUD2_BufferLength;
- u8 TVA_BufferLength;
+ struct {
+ u8 UVI1_BufferLength;
+ u8 UVI2_BufferLength;
+ u8 TVO_BufferLength;
+ u8 AUD1_BufferLength;
+ u8 AUD2_BufferLength;
+ u8 TVA_BufferLength;
+ } __packed config;
} __attribute__ ((__packed__));
struct FW_CONFIGURE_UART {
From: Linus Walleij <[email protected]>
commit 9436abc40139503a7cea22a96437697d048f31c0 upstream
This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.
Cc: Peter Meerwald <[email protected]>
Cc: Oleksandr Kravchenko <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/accel/bma180.c | 68 +++++++++++++++++++++++++++++----------------
1 file changed, 44 insertions(+), 24 deletions(-)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -626,32 +626,52 @@ static const struct iio_chan_spec bma250
static const struct bma180_part_info bma180_part_info[] = {
[BMA180] = {
- bma180_channels, ARRAY_SIZE(bma180_channels),
- bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
- bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
- BMA180_CTRL_REG0, BMA180_RESET_INT,
- BMA180_CTRL_REG0, BMA180_SLEEP,
- BMA180_BW_TCS, BMA180_BW,
- BMA180_OFFSET_LSB1, BMA180_RANGE,
- BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
- BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
- BMA180_RESET,
- bma180_chip_config,
- bma180_chip_disable,
+ .channels = bma180_channels,
+ .num_channels = ARRAY_SIZE(bma180_channels),
+ .scale_table = bma180_scale_table,
+ .num_scales = ARRAY_SIZE(bma180_scale_table),
+ .bw_table = bma180_bw_table,
+ .num_bw = ARRAY_SIZE(bma180_bw_table),
+ .int_reset_reg = BMA180_CTRL_REG0,
+ .int_reset_mask = BMA180_RESET_INT,
+ .sleep_reg = BMA180_CTRL_REG0,
+ .sleep_mask = BMA180_SLEEP,
+ .bw_reg = BMA180_BW_TCS,
+ .bw_mask = BMA180_BW,
+ .scale_reg = BMA180_OFFSET_LSB1,
+ .scale_mask = BMA180_RANGE,
+ .power_reg = BMA180_TCO_Z,
+ .power_mask = BMA180_MODE_CONFIG,
+ .lowpower_val = BMA180_LOW_POWER,
+ .int_enable_reg = BMA180_CTRL_REG3,
+ .int_enable_mask = BMA180_NEW_DATA_INT,
+ .softreset_reg = BMA180_RESET,
+ .chip_config = bma180_chip_config,
+ .chip_disable = bma180_chip_disable,
},
[BMA250] = {
- bma250_channels, ARRAY_SIZE(bma250_channels),
- bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
- bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
- BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
- BMA250_POWER_REG, BMA250_SUSPEND_MASK,
- BMA250_BW_REG, BMA250_BW_MASK,
- BMA250_RANGE_REG, BMA250_RANGE_MASK,
- BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
- BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
- BMA250_RESET_REG,
- bma250_chip_config,
- bma250_chip_disable,
+ .channels = bma250_channels,
+ .num_channels = ARRAY_SIZE(bma250_channels),
+ .scale_table = bma250_scale_table,
+ .num_scales = ARRAY_SIZE(bma250_scale_table),
+ .bw_table = bma250_bw_table,
+ .num_bw = ARRAY_SIZE(bma250_bw_table),
+ .int_reset_reg = BMA250_INT_RESET_REG,
+ .int_reset_mask = BMA250_INT_RESET_MASK,
+ .sleep_reg = BMA250_POWER_REG,
+ .sleep_mask = BMA250_SUSPEND_MASK,
+ .bw_reg = BMA250_BW_REG,
+ .bw_mask = BMA250_BW_MASK,
+ .scale_reg = BMA250_RANGE_REG,
+ .scale_mask = BMA250_RANGE_MASK,
+ .power_reg = BMA250_POWER_REG,
+ .power_mask = BMA250_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA250_INT_ENABLE_REG,
+ .int_enable_mask = BMA250_DATA_INTEN_MASK,
+ .softreset_reg = BMA250_RESET_REG,
+ .chip_config = bma250_chip_config,
+ .chip_disable = bma250_chip_disable,
},
};
On Mon, Jul 26, 2021 at 05:38:00PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.241 release. There
> are 82 patches in this series, all will be posted as a response to this one.
> If anyone has any issues with these being applied, please let me know.
>
> Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000. Anything
> received after that time might be too late.
>
perf fails to build:
tests/topology.c: In function ‘session_write_header’:
tests/topology.c:53:2: error: implicit declaration of function ‘evlist__delete’; did you mean ‘perf_evlist__delete’?
tests/topology.c:53:2: error: nested extern declaration of ‘evlist__delete’
Guenter
On Tue, 27 Jul 2021 at 01:04, Guenter Roeck <[email protected]> wrote:
>
> On Mon, Jul 26, 2021 at 05:38:00PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.241 release. There
> > are 82 patches in this series, all will be posted as a response to this one.
> > If anyone has any issues with these being applied, please let me know.
> >
> > Responses should be made by Wed, 28 Jul 2021 15:38:12 +0000. Anything
> > received after that time might be too late.
> >
>
> perf fails to build:
Results from Linaro’s test farm.
These build warnings / errors were noticed on arm64, arm, x86_64, and i386
while building perf on 4.14, 4.9 and 4.4.
>
> tests/topology.c: In function ‘session_write_header’:
> tests/topology.c:53:2: error: implicit declaration of function ‘evlist__delete’; did you mean ‘perf_evlist__delete’?
> tests/topology.c:53:2: error: nested extern declaration of ‘evlist__delete’
>
> Guenter
ref:
https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=intel-corei7-64,label=docker-buster-lkft/1184/console
--
Linaro LKFT
https://lkft.linaro.org