This is the start of the stable review cycle for the 5.10.38 release.
There are 289 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.38-rc1
Kuninori Morimoto <[email protected]>
ASoC: rsnd: check all BUSIF status when error
Christoph Hellwig <[email protected]>
nvme: do not try to reconfigure APST when the controller is not live
Arnd Bergmann <[email protected]>
ext4: fix debug format string warning
Kees Cook <[email protected]>
debugfs: Make debugfs_allow RO after init
Zhen Lei <[email protected]>
dt-bindings: serial: 8250: Remove duplicated compatible strings
Geert Uytterhoeven <[email protected]>
dt-bindings: media: renesas,vin: Make resets optional on R-Car Gen1
Qii Wang <[email protected]>
i2c: mediatek: Fix send master code at more than 1MHz
Fabio Estevam <[email protected]>
media: rkvdec: Remove of_match_ptr()
Paweł Chmiel <[email protected]>
clk: exynos7: Mark aclk_fsys1_200 as critical
Stéphane Marchesin <[email protected]>
drm/i915: Fix crash in auto_retire
Tvrtko Ursulin <[email protected]>
drm/i915/overlay: Fix active retire callback alignment
Ville Syrjälä <[email protected]>
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
Lv Yunlong <[email protected]>
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
Greg Kroah-Hartman <[email protected]>
kobject_uevent: remove warning in init_uevent_argv()
Badhri Jagan Sridharan <[email protected]>
usb: typec: tcpm: Fix error while calculating PPS out values
Ard Biesheuvel <[email protected]>
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
Ard Biesheuvel <[email protected]>
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Ard Biesheuvel <[email protected]>
ARM: 9012/1: move device tree mapping out of linear region
Ard Biesheuvel <[email protected]>
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
Tony Lindgren <[email protected]>
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
Tony Lindgren <[email protected]>
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
Maciej W. Rozycki <[email protected]>
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
Maciej W. Rozycki <[email protected]>
MIPS: Avoid DIVU in `__div64_32' is result would be zero
Maciej W. Rozycki <[email protected]>
MIPS: Reinstate platform `__div64_32' handler
Matthew Wilcox (Oracle) <[email protected]>
mm: fix struct page layout on 32-bit systems
Lu Baolu <[email protected]>
iommu/vt-d: Remove WO permissions on second-level paging entries
Lu Baolu <[email protected]>
iommu/vt-d: Preset Access/Dirty bits for IOVA over FL
Greg Kroah-Hartman <[email protected]>
Revert "iommu/vt-d: Preset Access/Dirty bits for IOVA over FL"
Greg Kroah-Hartman <[email protected]>
Revert "iommu/vt-d: Remove WO permissions on second-level paging entries"
Sean Christopherson <[email protected]>
KVM: VMX: Disable preemption when probing user return MSRs
Sean Christopherson <[email protected]>
KVM: VMX: Do not advertise RDPID if ENABLE_RDTSCP control is unsupported
Vitaly Kuznetsov <[email protected]>
KVM: nVMX: Always make an attempt to map eVMCS after migration
Sean Christopherson <[email protected]>
KVM: x86: Move RDPID emulation intercept to its own enum
Sean Christopherson <[email protected]>
KVM: x86: Emulate RDPID only if RDTSCP is supported
Juergen Gross <[email protected]>
xen/gntdev: fix gntdev_mmap() error exit path
Oliver Neukum <[email protected]>
cdc-wdm: untangle a circular dependency between callback and softint
Colin Ian King <[email protected]>
iio: tsl2583: Fix division by a zero lux_val
Dmitry Osipenko <[email protected]>
iio: gyro: mpu3050: Fix reported temperature value
Sandeep Singh <[email protected]>
xhci: Add reset resume quirk for AMD xhci controller.
Christophe JAILLET <[email protected]>
xhci: Do not use GFP_KERNEL in (potentially) atomic context
Abhijeet Rao <[email protected]>
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
Andy Shevchenko <[email protected]>
usb: typec: ucsi: Put fwnode in any case during ->probe()
Jack Pham <[email protected]>
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
Wesley Cheng <[email protected]>
usb: dwc3: gadget: Return success always for kick transfer in ep queue
Jack Pham <[email protected]>
usb: dwc3: gadget: Enable suspend events
Chunfeng Yun <[email protected]>
usb: core: hub: fix race condition about TRSMRCY of resume
Phil Elwell <[email protected]>
usb: dwc2: Fix gadget DMA unmap direction
Maximilian Luz <[email protected]>
usb: xhci: Increase timeout for HC halt
Ferry Toth <[email protected]>
usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield
Marcel Hamer <[email protected]>
usb: dwc3: omap: improve extcon initialization
Bart Van Assche <[email protected]>
blk-mq: Swap two calls in blk_mq_exit_queue()
Ming Lei <[email protected]>
blk-mq: plug request for shared sbitmap
Sun Ke <[email protected]>
nbd: Fix NULL pointer in flush_workqueue
Chao Yu <[email protected]>
f2fs: compress: fix to assign cc.cluster_idx correctly
Chao Yu <[email protected]>
f2fs: compress: fix race condition of overwrite vs truncate
Chao Yu <[email protected]>
f2fs: compress: fix to free compress page correctly
Michal Kalderon <[email protected]>
nvmet-rdma: Fix NULL deref when SEND is completed with error
Chaitanya Kulkarni <[email protected]>
nvmet: fix inline bio check for bdev-ns
Chaitanya Kulkarni <[email protected]>
nvmet: add lba to sect conversion helpers
Omar Sandoval <[email protected]>
kyber: fix out of bounds access when preempted
Christophe JAILLET <[email protected]>
ACPI: scan: Fix a memory leak in an error handling path
Christophe JAILLET <[email protected]>
usb: musb: Fix an error message
Eddie James <[email protected]>
hwmon: (occ) Fix poll rate limiting
Christophe JAILLET <[email protected]>
usb: fotg210-hcd: Fix an error message
Alexandru Ardelean <[email protected]>
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
Dinghao Liu <[email protected]>
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
Dinghao Liu <[email protected]>
iio: light: gp2ap002: Fix rumtime PM imbalance on error
Jack Pham <[email protected]>
usb: dwc3: gadget: Free gadget structure only after freeing endpoints
Jiri Olsa <[email protected]>
perf tools: Fix dynamic libbpf link
Zhen Lei <[email protected]>
xen/unpopulated-alloc: fix error return code in fill_list()
Dan Williams <[email protected]>
xen/unpopulated-alloc: consolidate pgmap manipulation
Vivek Goyal <[email protected]>
dax: Wake up all waiters after invalidating dax entry
Vivek Goyal <[email protected]>
dax: Add a wakeup mode parameter to put_unlocked_entry()
Vivek Goyal <[email protected]>
dax: Add an enum for specifying dax wakup mode
Thomas Gleixner <[email protected]>
KVM: x86: Prevent deadlock against tk_core.seq
Thomas Gleixner <[email protected]>
KVM: x86: Cancel pvclock_gtod_work on module removal
Kuogee Hsieh <[email protected]>
drm/msm/dp: initialize audio_comp when audio starts
Wanpeng Li <[email protected]>
KVM: LAPIC: Accurately guarantee busy wait for timer to expire when using hv_timer
Benjamin Segall <[email protected]>
kvm: exit halt polling on need_resched() as well
Ville Syrjälä <[email protected]>
drm/i915: Avoid div-by-zero on gen2
David Ward <[email protected]>
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
Kai-Heng Feng <[email protected]>
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
Filipe Manana <[email protected]>
btrfs: fix race leading to unpersisted data and metadata on fsync
Catalin Marinas <[email protected]>
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
Peter Collingbourne <[email protected]>
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
Tejun Heo <[email protected]>
blk-iocost: fix weight updates of inner active iocgs
Peter Xu <[email protected]>
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Peter Collingbourne <[email protected]>
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
Axel Rasmussen <[email protected]>
userfaultfd: release page in error path to avoid BUG_ON
Phillip Lougher <[email protected]>
squashfs: fix divide error in calculate_skip()
Jouni Roivas <[email protected]>
hfsplus: prevent corruption in shrinking truncate
Michael Ellerman <[email protected]>
powerpc/64s: Fix crashes when toggling entry flush barrier
Michael Ellerman <[email protected]>
powerpc/64s: Fix crashes when toggling stf barrier
Vladimir Isaev <[email protected]>
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
Vladimir Isaev <[email protected]>
ARC: mm: PAE: use 40-bit physical page mask
Vineet Gupta <[email protected]>
ARC: entry: fix off-by-one error in syscall number validation
Chao Yu <[email protected]>
f2fs: avoid unneeded data copy in f2fs_ioc_move_range()
Paolo Abeni <[email protected]>
mptcp: fix splat when closing unaccepted socket
Mateusz Palczewski <[email protected]>
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
Jaroslaw Gawin <[email protected]>
i40e: fix the restart auto-negotiation after FEC modified
Yunjian Wang <[email protected]>
i40e: Fix use-after-free in i40e_client_subtask()
Magnus Karlsson <[email protected]>
i40e: fix broken XDP support
Eric Dumazet <[email protected]>
netfilter: nftables: avoid overflows in nft_hash_buckets()
David Hildenbrand <[email protected]>
kernel/resource: make walk_mem_res() find all busy IORESOURCE_MEM resources
David Hildenbrand <[email protected]>
kernel/resource: make walk_system_ram_res() find all busy IORESOURCE_SYSTEM_RAM resources
Jia-Ju Bai <[email protected]>
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
Colin Ian King <[email protected]>
fs/proc/generic.c: fix incorrect pde_is_permanent check
Odin Ugedal <[email protected]>
sched/fair: Fix unfairness caused by missing load decay
Quentin Perret <[email protected]>
sched: Fix out-of-bound access in uclamp
Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
Frieder Schrempf <[email protected]>
can: mcp251x: fix resume from sleep before interface was brought up
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
Pablo Neira Ayuso <[email protected]>
netfilter: nftables: Fix a memleak from userdata error path in new objects
Pablo Neira Ayuso <[email protected]>
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
Cong Wang <[email protected]>
smc: disallow TCP_ULP in smc_setsockopt()
Maciej Żenczykowski <[email protected]>
net: fix nla_strcmp to handle more then one trailing null character
Fernando Fernandez Mancera <[email protected]>
ethtool: fix missing NLM_F_MULTI flag when dumping
Pavel Tatashin <[email protected]>
mm/gup: check for isolation errors
Pavel Tatashin <[email protected]>
mm/gup: return an error on migration failure
Pavel Tatashin <[email protected]>
mm/gup: check every subpage of a compound page during isolation
Miaohe Lin <[email protected]>
ksm: fix potential missing rmap_item for stable_node
Miaohe Lin <[email protected]>
mm/migrate.c: fix potential indeterminate pte entry in migrate_vma_insert_page()
Miaohe Lin <[email protected]>
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
Miaohe Lin <[email protected]>
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
Mark Rutland <[email protected]>
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
Marc Zyngier <[email protected]>
arm64: entry: factor irq triage logic into macros
Kees Cook <[email protected]>
drm/radeon: Avoid power table parsing memory leaks
Kees Cook <[email protected]>
drm/radeon: Fix off-by-one power_state index heap overwrite
Ramesh Babu B <[email protected]>
net: stmmac: Clear receive all(RA) bit when promiscuous mode is off
Xuan Zhuo <[email protected]>
xsk: Fix for xp_aligned_validate_desc() when len == chunk_size
Pablo Neira Ayuso <[email protected]>
netfilter: xt_SECMARK: add new revision to fix structure layout
Xin Long <[email protected]>
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
Lv Yunlong <[email protected]>
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
Md Haris Iqbal <[email protected]>
block/rnbd-clt: Check the return value of the function rtrs_clt_query
Md Haris Iqbal <[email protected]>
block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
Brendan Jackman <[email protected]>
libbpf: Fix signed overflow in ringbuf_process_ring
Baptiste Lepers <[email protected]>
sunrpc: Fix misplaced barrier in call_decode
Anup Patel <[email protected]>
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
Xin Long <[email protected]>
sctp: do asoc update earlier in sctp_sf_do_dupcook_a
Yufeng Mo <[email protected]>
net: hns3: disable phy loopback setting in hclge_mac_start_phy
Peng Li <[email protected]>
net: hns3: use netif_tx_disable to stop the transmit queue
Hao Chen <[email protected]>
net: hns3: fix for vxlan gpe tx checksum bug
Jian Shen <[email protected]>
net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()
Yufeng Mo <[email protected]>
net: hns3: initialize the message content in hclge_get_link_mode()
Yufeng Mo <[email protected]>
net: hns3: fix incorrect configuration for igu_egu_hw_err
Nobuhiro Iwamatsu <[email protected]>
rtc: ds1307: Fix wday settings for rx8130
Can Guo <[email protected]>
scsi: ufs: core: Narrow down fast path in system suspend path
Can Guo <[email protected]>
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
Can Guo <[email protected]>
scsi: ufs: core: Do not put UFS power into LPM if link is broken
Anastasia Kovaleva <[email protected]>
scsi: qla2xxx: Prevent PRLI in target mode
Jeff Layton <[email protected]>
ceph: fix inode leak on getattr error in __fh_to_dentry
Claire Chang <[email protected]>
swiotlb: Fix the type of index
Chuck Lever <[email protected]>
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
Chuck Lever <[email protected]>
xprtrdma: Fix cwnd update ordering
Chuck Lever <[email protected]>
xprtrdma: Avoid Receive Queue wrapping
Uwe Kleine-König <[email protected]>
pwm: atmel: Fix duty cycle calculation in .get_state()
Dan Carpenter <[email protected]>
SUNRPC: fix ternary sign expansion bug in tracing
Dave Jiang <[email protected]>
dmaengine: idxd: fix cdev setup and free device lifetime issues
Dave Jiang <[email protected]>
dmaengine: idxd: fix dma device lifetime
Colin Ian King <[email protected]>
dmaengine: idxd: Fix potential null dereference on pointer status
Michael Walle <[email protected]>
rtc: fsl-ftm-alarm: add MODULE_TABLE()
J. Bruce Fields <[email protected]>
nfsd: ensure new clients break delegations
Trond Myklebust <[email protected]>
NFSv4.x: Don't return NFS4ERR_NOMATCHING_LAYOUT if we're unmounting
Guangqing Zhu <[email protected]>
thermal/drivers/tsens: Fix missing put_device error
Chris Dion <[email protected]>
SUNRPC: Handle major timeout in xprt_adjust_timeout()
Chuck Lever <[email protected]>
SUNRPC: Remove trace_xprt_transmit_queued
Chuck Lever <[email protected]>
SUNRPC: Move fault injection call sites
Olga Kornievskaia <[email protected]>
NFSv4.2 fix handling of sr_eof in SEEK's reply
Nikola Livic <[email protected]>
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
Yang Yingliang <[email protected]>
PCI: endpoint: Fix missing destroy_workqueue()
Trond Myklebust <[email protected]>
NFS: Deal correctly with attribute generation counter overflow
Trond Myklebust <[email protected]>
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
Trond Myklebust <[email protected]>
NFS: Fix attribute bitmask in _nfs42_proc_fallocate()
Trond Myklebust <[email protected]>
NFS: nfs4_bitmask_adjust() must not change the server global bitmasks
Jia-Ju Bai <[email protected]>
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
Chao Yu <[email protected]>
f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
Yi Zhuang <[email protected]>
f2fs: Fix a hungtask problem in atomic write
Chao Yu <[email protected]>
f2fs: fix to cover __allocate_new_section() with curseg_lock
Chao Yu <[email protected]>
f2fs: fix to avoid touching checkpointed data in get_victim()
Shradha Todi <[email protected]>
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
Kishon Vijay Abraham I <[email protected]>
PCI: endpoint: Make *_free_bar() to return error codes on failure
Kishon Vijay Abraham I <[email protected]>
PCI: endpoint: Add helper API to get the 'next' unreserved BAR
Kishon Vijay Abraham I <[email protected]>
PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
Chao Yu <[email protected]>
f2fs: fix to update last i_size if fallocate partially succeeds
Chao Yu <[email protected]>
f2fs: fix to align to section for fallocate() on pinned file
Zhen Lei <[email protected]>
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
Dmitry Baryshkov <[email protected]>
PCI: Release OF node in pci_scan_device()'s error path
Pali Rohár <[email protected]>
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
Bjorn Andersson <[email protected]>
remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loader
Sibi Sankar <[email protected]>
remoteproc: qcom_q6v5_mss: Replace ioremap with memremap
Colin Ian King <[email protected]>
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
Chao Yu <[email protected]>
f2fs: fix panic during f2fs_resize_fs()
Chao Yu <[email protected]>
f2fs: fix to allow migrating fully valid segment
Chao Yu <[email protected]>
f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE
Chao Yu <[email protected]>
f2fs: move ioctl interface definitions to separated file
Jia-Ju Bai <[email protected]>
thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()
David Ward <[email protected]>
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
Petr Mladek <[email protected]>
watchdog: fix barriers when printing backtraces from all CPUs
Petr Mladek <[email protected]>
watchdog/softlockup: remove logic that tried to prevent repeated reports
Petr Mladek <[email protected]>
watchdog: explicitly update timestamp when reporting softlockup
Petr Mladek <[email protected]>
watchdog: rename __touch_watchdog() to a better descriptive name
Sergei Trofimovich <[email protected]>
ia64: module: fix symbolizer crash on fdescr
Michael Chan <[email protected]>
bnxt_en: Add PCI IDs for Hyper-V VF devices.
Masahiro Yamada <[email protected]>
kbuild: generate Module.symvers only when vmlinux exists
Petr Machata <[email protected]>
selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test
Petr Machata <[email protected]>
selftests: mlxsw: Increase the tolerance of backlog buildup
Felix Fietkau <[email protected]>
net: ethernet: mtk_eth_soc: fix RX VLAN offload
Stefan Assmann <[email protected]>
iavf: remove duplicate free resources calls
Alexey Kardashevskiy <[email protected]>
powerpc/iommu: Annotate nested lock for lockdep
Lee Gibson <[email protected]>
qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
Sean Christopherson <[email protected]>
crypto: ccp: Free SEV device if SEV init fails
Felix Fietkau <[email protected]>
mt76: mt7615: fix entering driver-own state on mt7663
Jinzhou Su <[email protected]>
drm/amdgpu: Add mem sync flag for IB allocated by SA
Dingchen (David) Zhang <[email protected]>
drm/amd/display: add handling for hdcp2 rx id list validation
Robin Singh <[email protected]>
drm/amd/display: fixed divide by zero kernel crash during dsc enablement
Michael Ellerman <[email protected]>
powerpc/pseries: Stop calling printk in rtas_stop_self()
Yaqi Chen <[email protected]>
samples/bpf: Fix broken tracex1 due to kprobe argument change
Du Cheng <[email protected]>
net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule
Gustavo A. R. Silva <[email protected]>
ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()
David Ward <[email protected]>
ASoC: rt286: Generalize support for ALC3263 codec
Srikar Dronamraju <[email protected]>
powerpc/smp: Set numa node before updating mask
Gustavo A. R. Silva <[email protected]>
flow_dissector: Fix out-of-bounds warning in __skb_flow_bpf_to_target()
Gustavo A. R. Silva <[email protected]>
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume
Vamshi Krishna Gopal <[email protected]>
ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp
Takashi Iwai <[email protected]>
ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740
Mihai Moldovan <[email protected]>
kconfig: nconf: stop endless search loops
Yonghong Song <[email protected]>
selftests: Set CC to clang in lib.mk if LLVM is set
Anthony Wang <[email protected]>
drm/amd/display: Force vsync flip when reconfiguring MPCC
Suravee Suthikulpanit <[email protected]>
iommu/amd: Remove performance counter pre-initialization test
Paul Menzel <[email protected]>
Revert "iommu/amd: Fix performance counter initialization"
Kuninori Morimoto <[email protected]>
ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
Vaibhav Jain <[email protected]>
powerpc/mm: Add cond_resched() while removing hpte mappings
Johannes Berg <[email protected]>
iwlwifi: pcie: make cfg vs. trans_cfg more robust
Miklos Szeredi <[email protected]>
cuse: prevent clone
Miklos Szeredi <[email protected]>
virtiofs: fix userns
Vivek Goyal <[email protected]>
fuse: invalidate attrs when page writeback completes
Shayne Chen <[email protected]>
mt76: mt7915: fix txpower init for TSSI off chips
David Bauer <[email protected]>
mt76: mt76x0: disable GTK offloading
Sander Vanheule <[email protected]>
mt76: mt7615: support loading EEPROM for MT7613BE
Po-Hao Huang <[email protected]>
rtw88: 8822c: add LC calibration for RTL8822C
Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: use 'int' for register masks in Exynos
Emmanuel Grumbach <[email protected]>
mac80211: clear the beacon's CRC after channel switch
Mike Marciniszyn <[email protected]>
IB/hfi1: Correct oversized ring allocation
Suzuki K Poulose <[email protected]>
coresight: Do not scan for graph if none is present
Tiezhu Yang <[email protected]>
MIPS: Loongson64: Use _CACHE_UNCACHED instead of _CACHE_UNCACHED_ACCELERATED
Bence Csókás <[email protected]>
i2c: Add I2C_AQ_NO_REP_START adapter quirk
Hans de Goede <[email protected]>
ASoC: rt5670: Add a quirk for the Dell Venue 10 Pro 5055
mark-yw.chen <[email protected]>
Bluetooth: btusb: Enable quirk boolean flag for Mediatek Chip.
Paul M Stillwell Jr <[email protected]>
ice: handle increasing Tx or Rx ring sizes
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
Eric Dumazet <[email protected]>
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
Yunsheng Lin <[email protected]>
net: hns3: add handling for xmit skb with recursive fraglist
Guangbin Huang <[email protected]>
net: hns3: remediate a potential overflow risk of bd_num_list
Christophe Leroy <[email protected]>
powerpc/32: Statically initialise first emergency context
Russell Currey <[email protected]>
selftests/powerpc: Fix L1D flushing tests for Power10
Archie Pusaka <[email protected]>
Bluetooth: check for zapped sk before connecting
Nikolay Aleksandrov <[email protected]>
net: bridge: when suppression is enabled exclude RARP packets
Vladimir Oltean <[email protected]>
net/sched: cls_flower: use ntohs for struct flow_dissector_key_ports
Tetsuo Handa <[email protected]>
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
Archie Pusaka <[email protected]>
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Takashi Sakamoto <[email protected]>
ALSA: bebob: enable to deliver MIDI messages for multiple ports
Tong Zhang <[email protected]>
ALSA: rme9652: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdspm: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdsp: don't disable if not enabled
Wolfram Sang <[email protected]>
i2c: bail out early when RDWR parameters are wrong
Ayush Garg <[email protected]>
Bluetooth: Fix incorrect status handling in LE PHY UPDATE event
Mikhail Durnev <[email protected]>
ASoC: rsnd: core: Check convert rate in rsnd_hw_params
Jonathan McDowell <[email protected]>
net: stmmac: Set FIFO sizes for ipq806x
Maxim Mikityanskiy <[email protected]>
net/mlx5e: Use net_prefetchw instead of prefetchw in MPWQE TX datapath
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
Hoang Le <[email protected]>
tipc: convert dest node's address to network order
Alexander Aring <[email protected]>
fs: dlm: flush swork on shutdown
Alexander Aring <[email protected]>
fs: dlm: check on minimum msglen size
Alexander Aring <[email protected]>
fs: dlm: add errno handling to check callback
Alexander Aring <[email protected]>
fs: dlm: fix debugfs dump
Pradeep Kumar Chitrapu <[email protected]>
ath11k: fix thermal temperature read
David Matlack <[email protected]>
kvm: Cap halt polling at kvm->max_halt_poll_ns
Rafael J. Wysocki <[email protected]>
cpufreq: intel_pstate: Use HWP if enabled by platform firmware
Tony Lindgren <[email protected]>
PM: runtime: Fix unpaired parent child_count for force_resume
Sumeet Pawnikar <[email protected]>
ACPI: PM: Add ACPI ID of Alder Lake Fan
Lai Jiangshan <[email protected]>
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
Sean Christopherson <[email protected]>
KVM: x86/mmu: Remove the defunct update_pte() paging hook
Jarkko Sakkinen <[email protected]>
tpm, tpm_tis: Reserve locality in tpm_tis_resume()
Jarkko Sakkinen <[email protected]>
tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
Zhen Lei <[email protected]>
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
Colin Ian King <[email protected]>
KEYS: trusted: Fix memory leak on object td
-------------
Diffstat:
.gitignore | 1 +
Documentation/arm/memory.rst | 7 +-
.../devicetree/bindings/media/renesas,vin.yaml | 46 +-
Documentation/devicetree/bindings/serial/8250.yaml | 5 -
Documentation/dontdiff | 1 +
MAINTAINERS | 1 +
Makefile | 6 +-
arch/arc/include/asm/page.h | 12 +
arch/arc/include/asm/pgtable.h | 12 +-
arch/arc/include/uapi/asm/page.h | 1 -
arch/arc/kernel/entry.S | 4 +-
arch/arc/mm/init.c | 11 +-
arch/arc/mm/ioremap.c | 5 +-
arch/arc/mm/tlb.c | 2 +-
arch/arm/boot/dts/dra7-l4.dtsi | 4 +-
arch/arm/boot/dts/dra7.dtsi | 20 +
arch/arm/include/asm/fixmap.h | 2 +-
arch/arm/include/asm/memory.h | 5 +
arch/arm/include/asm/prom.h | 4 +-
arch/arm/kernel/atags.h | 4 +-
arch/arm/kernel/atags_parse.c | 6 +-
arch/arm/kernel/devtree.c | 6 +-
arch/arm/kernel/head.S | 9 +-
arch/arm/kernel/hw_breakpoint.c | 2 +-
arch/arm/kernel/setup.c | 19 +-
arch/arm/mm/init.c | 1 -
arch/arm/mm/mmu.c | 20 +-
arch/arm/mm/pv-fixup-asm.S | 4 +-
arch/arm64/include/asm/daifflags.h | 3 +
arch/arm64/kernel/entry-common.c | 17 -
arch/arm64/kernel/entry.S | 85 ++--
arch/arm64/mm/flush.c | 4 +-
arch/arm64/mm/proc.S | 12 +
arch/ia64/include/asm/module.h | 6 +-
arch/ia64/kernel/module.c | 29 +-
arch/mips/include/asm/div64.h | 55 ++-
arch/mips/kernel/cpu-probe.c | 3 -
arch/powerpc/kernel/head_32.h | 6 +-
arch/powerpc/kernel/iommu.c | 4 +-
arch/powerpc/kernel/setup_32.c | 2 +-
arch/powerpc/kernel/smp.c | 6 +-
arch/powerpc/lib/feature-fixups.c | 35 +-
arch/powerpc/mm/book3s64/hash_utils.c | 13 +-
arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 -
arch/riscv/kernel/smp.c | 2 +-
arch/x86/include/asm/idtentry.h | 15 +
arch/x86/include/asm/kvm_host.h | 4 +-
arch/x86/kernel/nmi.c | 10 +
arch/x86/kvm/cpuid.c | 3 +-
arch/x86/kvm/emulate.c | 2 +-
arch/x86/kvm/kvm_emulate.h | 1 +
arch/x86/kvm/lapic.c | 2 +-
arch/x86/kvm/mmu/mmu.c | 49 +-
arch/x86/kvm/vmx/nested.c | 29 +-
arch/x86/kvm/vmx/vmx.c | 30 +-
arch/x86/kvm/x86.c | 40 +-
block/bfq-iosched.c | 3 +-
block/blk-iocost.c | 14 +-
block/blk-mq-sched.c | 8 +-
block/blk-mq.c | 11 +-
block/kyber-iosched.c | 5 +-
block/mq-deadline.c | 3 +-
drivers/acpi/device_pm.c | 1 +
drivers/acpi/scan.c | 1 +
drivers/base/power/runtime.c | 10 +-
drivers/block/nbd.c | 3 +-
drivers/block/rnbd/rnbd-clt.c | 12 +-
drivers/block/rnbd/rnbd-clt.h | 2 +-
drivers/bluetooth/btusb.c | 4 +-
drivers/char/tpm/tpm2-cmd.c | 1 +
drivers/char/tpm/tpm_tis_core.c | 22 +-
drivers/clk/samsung/clk-exynos7.c | 7 +-
drivers/clocksource/timer-ti-dm-systimer.c | 144 +++++-
drivers/cpufreq/intel_pstate.c | 14 +-
drivers/crypto/ccp/sev-dev.c | 4 +-
drivers/dma/idxd/cdev.c | 129 ++----
drivers/dma/idxd/device.c | 5 +-
drivers/dma/idxd/dma.c | 77 +++-
drivers/dma/idxd/idxd.h | 25 +-
drivers/dma/idxd/init.c | 2 +-
drivers/dma/idxd/irq.c | 4 +-
drivers/dma/idxd/sysfs.c | 10 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 2 +
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c | 1 +
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 +
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c | 15 +-
.../gpu/drm/amd/display/modules/hdcp/hdcp_psp.c | 2 +
drivers/gpu/drm/i915/display/intel_overlay.c | 2 +-
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
drivers/gpu/drm/i915/gt/gen8_ppgtt.c | 1 -
drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c | 4 +-
drivers/gpu/drm/i915/i915_active.c | 3 +-
drivers/gpu/drm/msm/dp/dp_audio.c | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 11 +-
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
drivers/gpu/drm/radeon/radeon.h | 1 +
drivers/gpu/drm/radeon/radeon_atombios.c | 26 +-
drivers/gpu/drm/radeon/radeon_pm.c | 8 +
drivers/gpu/drm/radeon/si_dpm.c | 3 +
drivers/hwmon/occ/common.c | 5 +-
drivers/hwmon/occ/common.h | 2 +-
drivers/hwtracing/coresight/coresight-platform.c | 6 +
drivers/i2c/busses/i2c-mt65xx.c | 9 +-
drivers/i2c/i2c-dev.c | 9 +-
drivers/iio/accel/Kconfig | 1 -
drivers/iio/common/hid-sensors/Kconfig | 1 +
drivers/iio/gyro/Kconfig | 1 -
drivers/iio/gyro/mpu3050-core.c | 13 +-
drivers/iio/humidity/Kconfig | 1 -
drivers/iio/light/Kconfig | 2 -
drivers/iio/light/gp2ap002.c | 5 +-
drivers/iio/light/tsl2583.c | 8 +
drivers/iio/magnetometer/Kconfig | 1 -
drivers/iio/orientation/Kconfig | 2 -
drivers/iio/pressure/Kconfig | 1 -
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 1 +
drivers/iio/temperature/Kconfig | 1 -
drivers/infiniband/hw/hfi1/ipoib.h | 3 +-
drivers/infiniband/hw/hfi1/ipoib_tx.c | 14 +-
drivers/iommu/amd/init.c | 49 +-
drivers/iommu/intel/iommu.c | 5 +-
drivers/net/can/m_can/m_can.c | 3 +-
drivers/net/can/spi/mcp251x.c | 35 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 19 +-
drivers/net/ethernet/cisco/enic/enic_main.c | 7 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 127 ++++--
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 3 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 3 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 27 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 2 +
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 6 +-
drivers/net/ethernet/intel/i40e/i40e_client.c | 1 +
drivers/net/ethernet/intel/i40e/i40e_common.c | 4 +-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +-
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 +-
drivers/net/ethernet/intel/i40e/i40e_type.h | 7 +-
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 -
drivers/net/ethernet/intel/ice/ice_lib.c | 123 ++++--
drivers/net/ethernet/intel/ice/ice_txrx.h | 2 +
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 1 +
drivers/net/wireless/ath/ath11k/wmi.c | 53 +--
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 35 +-
drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 12 +-
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 4 +
drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 19 +-
drivers/net/wireless/quantenna/qtnfmac/event.c | 6 +-
drivers/net/wireless/realtek/rtw88/main.h | 2 +
drivers/net/wireless/realtek/rtw88/phy.c | 14 +
drivers/net/wireless/realtek/rtw88/phy.h | 1 +
drivers/net/wireless/realtek/rtw88/reg.h | 5 +
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 27 +-
drivers/net/wireless/wl3501.h | 47 +-
drivers/net/wireless/wl3501_cs.c | 54 +--
drivers/nvme/host/core.c | 3 +-
drivers/nvme/target/io-cmd-bdev.c | 10 +-
drivers/nvme/target/nvmet.h | 16 +
drivers/nvme/target/rdma.c | 4 +-
drivers/pci/controller/pcie-iproc-msi.c | 2 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 18 +-
drivers/pci/endpoint/pci-epc-core.c | 42 +-
drivers/pci/probe.c | 1 +
drivers/pinctrl/samsung/pinctrl-exynos.c | 10 +-
drivers/pwm/pwm-atmel.c | 2 +-
drivers/remoteproc/qcom_q6v5_mss.c | 30 +-
drivers/rpmsg/qcom_glink_native.c | 1 +
drivers/rtc/rtc-ds1307.c | 12 +-
drivers/rtc/rtc-fsl-ftm-alarm.c | 1 +
drivers/scsi/qla2xxx/qla_init.c | 3 +
drivers/scsi/ufs/ufshcd.c | 7 +-
drivers/staging/media/rkvdec/rkvdec.c | 2 +-
drivers/thermal/qcom/tsens.c | 6 +-
drivers/thermal/thermal_of.c | 7 +-
drivers/usb/class/cdc-wdm.c | 30 +-
drivers/usb/core/hub.c | 6 +-
drivers/usb/dwc2/core.h | 2 +
drivers/usb/dwc2/gadget.c | 3 +-
drivers/usb/dwc3/dwc3-omap.c | 5 +
drivers/usb/dwc3/dwc3-pci.c | 1 +
drivers/usb/dwc3/gadget.c | 11 +-
drivers/usb/host/fotg210-hcd.c | 4 +-
drivers/usb/host/xhci-ext-caps.h | 5 +-
drivers/usb/host/xhci-pci.c | 8 +-
drivers/usb/host/xhci.c | 6 +-
drivers/usb/musb/mediatek.c | 2 +-
drivers/usb/typec/tcpm/tcpm.c | 6 +-
drivers/usb/typec/ucsi/ucsi.c | 46 +-
drivers/usb/typec/ucsi/ucsi.h | 6 +-
drivers/xen/gntdev.c | 4 +-
drivers/xen/unpopulated-alloc.c | 16 +-
fs/btrfs/file.c | 36 +-
fs/btrfs/tree-log.c | 3 +-
fs/ceph/export.c | 4 +-
fs/dax.c | 35 +-
fs/debugfs/inode.c | 2 +-
fs/dlm/config.c | 23 +-
fs/dlm/debug_fs.c | 1 +
fs/dlm/lowcomms.c | 5 +-
fs/dlm/midcomms.c | 7 +-
fs/ext4/fast_commit.c | 2 +-
fs/f2fs/compress.c | 55 +--
fs/f2fs/data.c | 6 +-
fs/f2fs/f2fs.h | 86 +---
fs/f2fs/file.c | 184 +++++---
fs/f2fs/gc.c | 62 ++-
fs/f2fs/inline.c | 3 +-
fs/f2fs/segment.c | 86 ++--
fs/f2fs/segment.h | 14 +-
fs/f2fs/super.c | 2 +-
fs/fuse/cuse.c | 2 +
fs/fuse/file.c | 9 +
fs/fuse/virtio_fs.c | 3 +-
fs/hfsplus/extents.c | 7 +-
fs/hugetlbfs/inode.c | 5 +
fs/jbd2/recovery.c | 5 +-
fs/nfs/callback_proc.c | 17 +-
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
fs/nfs/inode.c | 8 +-
fs/nfs/nfs42proc.c | 31 +-
fs/nfs/nfs4proc.c | 56 ++-
fs/nfsd/nfs4state.c | 24 +-
fs/proc/generic.c | 2 +-
fs/squashfs/file.c | 6 +-
include/linux/cpuhotplug.h | 1 +
include/linux/elevator.h | 2 +-
include/linux/i2c.h | 2 +
include/linux/mm.h | 32 ++
include/linux/mm_types.h | 4 +-
include/linux/nfs_xdr.h | 11 +-
include/linux/pci-epc.h | 6 +-
include/linux/pci-epf.h | 1 +
include/linux/pm.h | 1 +
include/net/page_pool.h | 12 +-
include/trace/events/f2fs.h | 1 +
include/trace/events/sunrpc.h | 1 -
include/uapi/linux/f2fs.h | 87 ++++
include/uapi/linux/netfilter/xt_SECMARK.h | 6 +
kernel/dma/swiotlb.c | 3 +-
kernel/kexec_file.c | 4 +-
kernel/resource.c | 4 +-
kernel/sched/core.c | 2 +-
kernel/sched/fair.c | 12 +-
kernel/watchdog.c | 40 +-
lib/kobject_uevent.c | 9 +-
lib/nlattr.c | 2 +-
lib/test_kasan.c | 29 +-
mm/gup.c | 94 ++--
mm/hugetlb.c | 11 +-
mm/khugepaged.c | 18 +-
mm/ksm.c | 1 +
mm/migrate.c | 7 +
mm/shmem.c | 34 +-
net/bluetooth/hci_event.c | 2 +-
net/bluetooth/l2cap_core.c | 4 +
net/bluetooth/l2cap_sock.c | 8 +
net/bridge/br_arp_nd_proxy.c | 4 +-
net/core/flow_dissector.c | 6 +-
net/core/page_pool.c | 12 +-
net/ethtool/ioctl.c | 2 +-
net/ethtool/netlink.c | 3 +-
net/ipv6/ip6_vti.c | 2 +-
net/mac80211/mlme.c | 5 +
net/mptcp/subflow.c | 3 +-
net/netfilter/nf_tables_api.c | 4 +-
net/netfilter/nfnetlink_osf.c | 2 +
net/netfilter/nft_set_hash.c | 10 +-
net/netfilter/xt_SECMARK.c | 88 +++-
net/sched/cls_flower.c | 36 +-
net/sched/sch_taprio.c | 6 +
net/sctp/sm_make_chunk.c | 2 +-
net/sctp/sm_statefuns.c | 28 +-
net/smc/af_smc.c | 4 +-
net/sunrpc/clnt.c | 12 +-
net/sunrpc/svcsock.c | 2 +-
net/sunrpc/xprt.c | 12 +-
net/sunrpc/xprtrdma/frwr_ops.c | 2 +-
net/sunrpc/xprtrdma/rpc_rdma.c | 3 +-
net/sunrpc/xprtrdma/transport.c | 6 +-
net/sunrpc/xprtrdma/verbs.c | 10 +-
net/sunrpc/xprtrdma/xprt_rdma.h | 2 +-
net/tipc/netlink_compat.c | 2 +-
net/xdp/xsk_queue.h | 7 +-
samples/bpf/tracex1_kern.c | 4 +-
scripts/Makefile.modpost | 15 +-
scripts/kconfig/nconf.c | 2 +-
scripts/mod/modpost.c | 15 +-
security/keys/trusted-keys/trusted_tpm1.c | 8 +-
sound/firewire/bebob/bebob_stream.c | 12 +-
sound/pci/hda/ideapad_s740_helper.c | 492 +++++++++++++++++++++
sound/pci/hda/patch_hdmi.c | 4 +-
sound/pci/hda/patch_realtek.c | 11 +
sound/pci/rme9652/hdsp.c | 3 +-
sound/pci/rme9652/hdspm.c | 3 +-
sound/pci/rme9652/rme9652.c | 3 +-
sound/soc/codecs/rt286.c | 23 +-
sound/soc/codecs/rt5670.c | 12 +
sound/soc/intel/boards/bytcr_rt5640.c | 20 +
sound/soc/intel/boards/sof_sdw.c | 11 +
sound/soc/sh/rcar/core.c | 69 ++-
sound/soc/sh/rcar/ssi.c | 16 +-
tools/lib/bpf/ringbuf.c | 30 +-
tools/perf/Makefile.config | 1 +
tools/perf/util/Build | 7 +
.../drivers/net/mlxsw/mirror_gre_scale.sh | 3 +-
.../selftests/drivers/net/mlxsw/sch_red_core.sh | 4 +-
tools/testing/selftests/lib.mk | 4 +
.../testing/selftests/net/forwarding/mirror_lib.sh | 19 +-
.../selftests/powerpc/security/entry_flush.c | 2 +-
.../selftests/powerpc/security/flush_utils.h | 4 +
.../testing/selftests/powerpc/security/rfi_flush.c | 2 +-
virt/kvm/kvm_main.c | 7 +-
319 files changed, 3312 insertions(+), 1473 deletions(-)
From: Colin Ian King <[email protected]>
commit 83a775d5f9bfda95b1c295f95a3a041a40c7f321 upstream.
Two error return paths are neglecting to free allocated object td,
causing a memory leak. Fix this by returning via the error return
path that securely kfree's td.
Fixes clang scan-build warning:
security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential
memory leak [unix.Malloc]
Cc: [email protected]
Fixes: 5df16caada3f ("KEYS: trusted: Fix incorrect handling of tpm_get_random()")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/trusted-keys/trusted_tpm1.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/security/keys/trusted-keys/trusted_tpm1.c
+++ b/security/keys/trusted-keys/trusted_tpm1.c
@@ -500,10 +500,12 @@ static int tpm_seal(struct tpm_buf *tb,
ret = tpm_get_random(chip, td->nonceodd, TPM_NONCE_SIZE);
if (ret < 0)
- return ret;
+ goto out;
- if (ret != TPM_NONCE_SIZE)
- return -EIO;
+ if (ret != TPM_NONCE_SIZE) {
+ ret = -EIO;
+ goto out;
+ }
ordinal = htonl(TPM_ORD_SEAL);
datsize = htonl(datalen);
From: Zhen Lei <[email protected]>
commit 1df83992d977355177810c2b711afc30546c81ce upstream.
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: [email protected]
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm2-cmd.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -656,6 +656,7 @@ int tpm2_get_cc_attrs_tbl(struct tpm_chi
if (nr_commands !=
be32_to_cpup((__be32 *)&buf.data[TPM_HEADER_SIZE + 5])) {
+ rc = -EFAULT;
tpm_buf_destroy(&buf);
goto out;
}
From: Jarkko Sakkinen <[email protected]>
commit e630af7dfb450d1c00c30077314acf33032ff9e4 upstream.
The earlier fix (linked) only partially fixed the locality handling bug
in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x.
Extend the locality handling to cover TPM2.
Cc: Hans de Goede <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/linux-integrity/[email protected]/
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Tested-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -709,16 +709,14 @@ static int tpm_tis_gen_interrupt(struct
cap_t cap;
int ret;
- /* TPM 2.0 */
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- return tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
-
- /* TPM 1.2 */
ret = request_locality(chip, 0);
if (ret < 0)
return ret;
- ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
+ else
+ ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
release_locality(chip, 0);
From: Tony Lindgren <[email protected]>
commit c745253e2a691a40c66790defe85c104a887e14a upstream.
As pm_runtime_need_not_resume() relies also on usage_count, it can return
a different value in pm_runtime_force_suspend() compared to when called in
pm_runtime_force_resume(). Different return values can happen if anything
calls PM runtime functions in between, and causes the parent child_count
to increase on every resume.
So far I've seen the issue only for omapdrm that does complicated things
with PM runtime calls during system suspend for legacy reasons:
omap_atomic_commit_tail() for omapdrm.0
dispc_runtime_get()
wakes up 58000000.dss as it's the dispc parent
dispc_runtime_resume()
rpm_resume() increases parent child_count
dispc_runtime_put() won't idle, PM runtime suspend blocked
pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume()
__update_runtime_status()
system suspended
pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume()
pm_runtime_enable() only called because of pm_runtime_need_not_resume()
omap_atomic_commit_tail() for omapdrm.0
dispc_runtime_get()
wakes up 58000000.dss as it's the dispc parent
dispc_runtime_resume()
rpm_resume() increases parent child_count
dispc_runtime_put() won't idle, PM runtime suspend blocked
...
rpm_suspend for 58000000.dss but parent child_count is now unbalanced
Let's fix the issue by adding a flag for needs_force_resume and use it in
pm_runtime_force_resume() instead of pm_runtime_need_not_resume().
Additionally omapdrm system suspend could be simplified later on to avoid
lots of unnecessary PM runtime calls and the complexity it adds. The
driver can just use internal functions that are shared between the PM
runtime and system suspend related functions.
Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()")
Signed-off-by: Tony Lindgren <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Tested-by: Tomi Valkeinen <[email protected]>
Cc: 4.16+ <[email protected]> # 4.16+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/runtime.c | 10 +++++++---
include/linux/pm.h | 1 +
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1637,6 +1637,7 @@ void pm_runtime_init(struct device *dev)
dev->power.request_pending = false;
dev->power.request = RPM_REQ_NONE;
dev->power.deferred_resume = false;
+ dev->power.needs_force_resume = 0;
INIT_WORK(&dev->power.work, pm_runtime_work);
dev->power.timer_expires = 0;
@@ -1804,10 +1805,12 @@ int pm_runtime_force_suspend(struct devi
* its parent, but set its status to RPM_SUSPENDED anyway in case this
* function will be called again for it in the meantime.
*/
- if (pm_runtime_need_not_resume(dev))
+ if (pm_runtime_need_not_resume(dev)) {
pm_runtime_set_suspended(dev);
- else
+ } else {
__update_runtime_status(dev, RPM_SUSPENDED);
+ dev->power.needs_force_resume = 1;
+ }
return 0;
@@ -1834,7 +1837,7 @@ int pm_runtime_force_resume(struct devic
int (*callback)(struct device *);
int ret = 0;
- if (!pm_runtime_status_suspended(dev) || pm_runtime_need_not_resume(dev))
+ if (!pm_runtime_status_suspended(dev) || !dev->power.needs_force_resume)
goto out;
/*
@@ -1853,6 +1856,7 @@ int pm_runtime_force_resume(struct devic
pm_runtime_mark_last_busy(dev);
out:
+ dev->power.needs_force_resume = 0;
pm_runtime_enable(dev);
return ret;
}
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -600,6 +600,7 @@ struct dev_pm_info {
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
+ unsigned int needs_force_resume:1;
unsigned int runtime_auto:1;
bool ignore_children:1;
unsigned int no_callbacks:1;
From: Rafael J. Wysocki <[email protected]>
commit e5af36b2adb858e982d78d41d7363d05d951a19a upstream.
It turns out that there are systems where HWP is enabled during
initialization by the platform firmware (BIOS), but HWP EPP support
is not advertised.
After commit 7aa1031223bc ("cpufreq: intel_pstate: Avoid enabling HWP
if EPP is not supported") intel_pstate refuses to use HWP on those
systems, but the fallback PERF_CTL interface does not work on them
either because of enabled HWP, and once enabled, HWP cannot be
disabled. Consequently, the users of those systems cannot control
CPU performance scaling.
Address this issue by making intel_pstate use HWP unconditionally if
it is enabled already when the driver starts.
Fixes: 7aa1031223bc ("cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported")
Reported-by: Srinivas Pandruvada <[email protected]>
Tested-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Cc: 5.9+ <[email protected]> # 5.9+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/intel_pstate.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -3019,6 +3019,14 @@ static const struct x86_cpu_id hwp_suppo
{}
};
+static bool intel_pstate_hwp_is_enabled(void)
+{
+ u64 value;
+
+ rdmsrl(MSR_PM_ENABLE, value);
+ return !!(value & 0x1);
+}
+
static int __init intel_pstate_init(void)
{
const struct x86_cpu_id *id;
@@ -3037,8 +3045,12 @@ static int __init intel_pstate_init(void
* Avoid enabling HWP for processors without EPP support,
* because that means incomplete HWP implementation which is a
* corner case and supporting it is generally problematic.
+ *
+ * If HWP is enabled already, though, there is no choice but to
+ * deal with it.
*/
- if (!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) {
+ if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) ||
+ intel_pstate_hwp_is_enabled()) {
hwp_active++;
hwp_mode_bdw = id->driver_data;
intel_pstate.attr = hwp_cpufreq_attrs;
From: David Matlack <[email protected]>
commit 258785ef08b323bddd844b4926a32c2b2045a1b0 upstream.
When growing halt-polling, there is no check that the poll time exceeds
the per-VM limit. It's possible for vcpu->halt_poll_ns to grow past
kvm->max_halt_poll_ns and stay there until a halt which takes longer
than kvm->halt_poll_ns.
Signed-off-by: David Matlack <[email protected]>
Signed-off-by: Venkatesh Srinivas <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
virt/kvm/kvm_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2717,8 +2717,8 @@ static void grow_halt_poll_ns(struct kvm
if (val < grow_start)
val = grow_start;
- if (val > halt_poll_ns)
- val = halt_poll_ns;
+ if (val > vcpu->kvm->max_halt_poll_ns)
+ val = vcpu->kvm->max_halt_poll_ns;
vcpu->halt_poll_ns = val;
out:
From: Pradeep Kumar Chitrapu <[email protected]>
[ Upstream commit e3de5bb7ac1a4cb262f8768924fd3ef6182b10bb ]
Fix dangling pointer in thermal temperature event which causes
incorrect temperature read.
Tested-on: IPQ8074 AHB WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 53 +++++++++++----------------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 173ab6ceed1f..eca86225a341 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -4986,31 +4986,6 @@ int ath11k_wmi_pull_fw_stats(struct ath11k_base *ab, struct sk_buff *skb,
return 0;
}
-static int
-ath11k_pull_pdev_temp_ev(struct ath11k_base *ab, u8 *evt_buf,
- u32 len, const struct wmi_pdev_temperature_event *ev)
-{
- const void **tb;
- int ret;
-
- tb = ath11k_wmi_tlv_parse_alloc(ab, evt_buf, len, GFP_ATOMIC);
- if (IS_ERR(tb)) {
- ret = PTR_ERR(tb);
- ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
- return ret;
- }
-
- ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
- if (!ev) {
- ath11k_warn(ab, "failed to fetch pdev temp ev");
- kfree(tb);
- return -EPROTO;
- }
-
- kfree(tb);
- return 0;
-}
-
size_t ath11k_wmi_fw_stats_num_vdevs(struct list_head *head)
{
struct ath11k_fw_stats_vdev *i;
@@ -6390,23 +6365,37 @@ ath11k_wmi_pdev_temperature_event(struct ath11k_base *ab,
struct sk_buff *skb)
{
struct ath11k *ar;
- struct wmi_pdev_temperature_event ev = {0};
+ const void **tb;
+ const struct wmi_pdev_temperature_event *ev;
+ int ret;
+
+ tb = ath11k_wmi_tlv_parse_alloc(ab, skb->data, skb->len, GFP_ATOMIC);
+ if (IS_ERR(tb)) {
+ ret = PTR_ERR(tb);
+ ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
+ return;
+ }
- if (ath11k_pull_pdev_temp_ev(ab, skb->data, skb->len, &ev) != 0) {
- ath11k_warn(ab, "failed to extract pdev temperature event");
+ ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
+ if (!ev) {
+ ath11k_warn(ab, "failed to fetch pdev temp ev");
+ kfree(tb);
return;
}
ath11k_dbg(ab, ATH11K_DBG_WMI,
- "pdev temperature ev temp %d pdev_id %d\n", ev.temp, ev.pdev_id);
+ "pdev temperature ev temp %d pdev_id %d\n", ev->temp, ev->pdev_id);
- ar = ath11k_mac_get_ar_by_pdev_id(ab, ev.pdev_id);
+ ar = ath11k_mac_get_ar_by_pdev_id(ab, ev->pdev_id);
if (!ar) {
- ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev.pdev_id);
+ ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev->pdev_id);
+ kfree(tb);
return;
}
- ath11k_thermal_event_temperature(ar, ev.temp);
+ ath11k_thermal_event_temperature(ar, ev->temp);
+
+ kfree(tb);
}
static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
--
2.30.2
From: Jarkko Sakkinen <[email protected]>
commit 8a2d296aaebadd68d9c1f6908667df1d1c84c051 upstream.
Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.
Cc: [email protected]
Cc: Lino Sanfilippo <[email protected]>
Reported-by: Hans de Goede <[email protected]>
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -1125,12 +1125,20 @@ int tpm_tis_resume(struct device *dev)
if (ret)
return ret;
- /* TPM 1.2 requires self-test on resume. This function actually returns
+ /*
+ * TPM 1.2 requires self-test on resume. This function actually returns
* an error code but for unknown reason it isn't handled.
*/
- if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
+ if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
+ ret = request_locality(chip, 0);
+ if (ret < 0)
+ return ret;
+
tpm1_do_selftest(chip);
+ release_locality(chip, 0);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(tpm_tis_resume);
From: Sumeet Pawnikar <[email protected]>
commit 2404b8747019184002823dba7d2f0ecf89d802b7 upstream.
Add a new unique fan ACPI device ID for Alder Lake to
support it in acpi_dev_pm_attach() function.
Fixes: 38748bcb940e ("ACPI: DPTF: Support Alder Lake")
Signed-off-by: Sumeet Pawnikar <[email protected]>
Acked-by: Zhang Rui <[email protected]>
Cc: 5.10+ <[email protected]> # 5.10+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/device_pm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -1301,6 +1301,7 @@ int acpi_dev_pm_attach(struct device *de
{"PNP0C0B", }, /* Generic ACPI fan */
{"INT3404", }, /* Fan */
{"INTC1044", }, /* Fan for Tiger Lake generation */
+ {"INTC1048", }, /* Fan for Alder Lake generation */
{}
};
struct acpi_device *adev = ACPI_COMPANION(dev);
From: Alexander Aring <[email protected]>
[ Upstream commit 92c48950b43f4a767388cf87709d8687151a641f ]
This patch fixes the following message which randomly pops up during
glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/debug_fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index d6bbccb0ed15..d5bd990bcab8 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -542,6 +542,7 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
if (bucket >= ls->ls_rsbtbl_size) {
kfree(ri);
+ ++*pos;
return NULL;
}
tree = toss ? &ls->ls_rsbtbl[bucket].toss : &ls->ls_rsbtbl[bucket].keep;
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit 710176e8363f269c6ecd73d203973b31ace119d3 ]
This patch adds an additional check for minimum dlm header size which is
an invalid dlm message and signals a broken stream. A msglen field cannot
be less than the dlm header size because the field is inclusive header
lengths.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/midcomms.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/dlm/midcomms.c b/fs/dlm/midcomms.c
index fde3a6afe4be..0bedfa8606a2 100644
--- a/fs/dlm/midcomms.c
+++ b/fs/dlm/midcomms.c
@@ -49,9 +49,10 @@ int dlm_process_incoming_buffer(int nodeid, unsigned char *buf, int len)
* cannot deliver this message to upper layers
*/
msglen = get_unaligned_le16(&hd->h_length);
- if (msglen > DEFAULT_BUFFER_SIZE) {
- log_print("received invalid length header: %u, will abort message parsing",
- msglen);
+ if (msglen > DEFAULT_BUFFER_SIZE ||
+ msglen < sizeof(struct dlm_header)) {
+ log_print("received invalid length header: %u from node %d, will abort message parsing",
+ msglen, nodeid);
return -EBADMSG;
}
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit 8aa9540b49e0833feba75dbf4f45babadd0ed215 ]
This allows to return individual errno values for the config attribute
check callback instead of returning invalid argument only.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/config.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index 49c5f9407098..73e6643903af 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -125,7 +125,7 @@ static ssize_t cluster_cluster_name_store(struct config_item *item,
CONFIGFS_ATTR(cluster_, cluster_name);
static ssize_t cluster_set(struct dlm_cluster *cl, unsigned int *cl_field,
- int *info_field, bool (*check_cb)(unsigned int x),
+ int *info_field, int (*check_cb)(unsigned int x),
const char *buf, size_t len)
{
unsigned int x;
@@ -137,8 +137,11 @@ static ssize_t cluster_set(struct dlm_cluster *cl, unsigned int *cl_field,
if (rc)
return rc;
- if (check_cb && check_cb(x))
- return -EINVAL;
+ if (check_cb) {
+ rc = check_cb(x);
+ if (rc)
+ return rc;
+ }
*cl_field = x;
*info_field = x;
@@ -161,14 +164,20 @@ static ssize_t cluster_##name##_show(struct config_item *item, char *buf) \
} \
CONFIGFS_ATTR(cluster_, name);
-static bool dlm_check_zero(unsigned int x)
+static int dlm_check_zero(unsigned int x)
{
- return !x;
+ if (!x)
+ return -EINVAL;
+
+ return 0;
}
-static bool dlm_check_buffer_size(unsigned int x)
+static int dlm_check_buffer_size(unsigned int x)
{
- return (x < DEFAULT_BUFFER_SIZE);
+ if (x < DEFAULT_BUFFER_SIZE)
+ return -EINVAL;
+
+ return 0;
}
CLUSTER_ATTR(tcp_port, dlm_check_zero);
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit eec054b5a7cfe6d1f1598a323b05771ee99857b5 ]
This patch fixes the flushing of send work before shutdown. The function
cancel_work_sync() is not the right workqueue functionality to use here
as it would cancel the work if the work queues itself. In cases of
EAGAIN in send() for dlm message we need to be sure that everything is
send out before. The function flush_work() will ensure that every send
work is be done inclusive in EAGAIN cases.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 79f56f16bc2c..44e2716ac158 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -612,10 +612,7 @@ static void shutdown_connection(struct connection *con)
{
int ret;
- if (cancel_work_sync(&con->swork)) {
- log_print("canceled swork for node %d", con->nodeid);
- clear_bit(CF_WRITE_PENDING, &con->flags);
- }
+ flush_work(&con->swork);
mutex_lock(&con->sock_mutex);
/* nothing to shutdown */
--
2.30.2
From: Ayush Garg <[email protected]>
[ Upstream commit 87df8bcccd2cede62dfb97dc3d4ca1fe66cb4f83 ]
Skip updation of tx and rx PHYs values, when PHY Update
event's status is not successful.
Signed-off-by: Ayush Garg <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index e0a542849735..4676e4b0be2b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5897,7 +5897,7 @@ static void hci_le_phy_update_evt(struct hci_dev *hdev, struct sk_buff *skb)
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
- if (!ev->status)
+ if (ev->status)
return;
hci_dev_lock(hdev);
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit b7c7203a1f751348f35fc4bcb157572d303f7573 ]
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index d5812e73eb63..2d887406ca85 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -478,6 +478,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
},
.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
BYT_RT5640_MONO_SPEAKER |
BYT_RT5640_DIFF_MIC |
BYT_RT5640_SSP0_AIF2 |
--
2.30.2
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit 991b2654605b455a94dac73e14b23480e7e20991 ]
Commit e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small
L1_CACHE_BYTES") switched to using net_prefetchw at all places in mlx5e.
In the same time frame, commit 5af75c747e2a ("net/mlx5e: Enhanced TX
MPWQE for SKBs") added one more usage of prefetchw. When these two
changes were merged, this new occurrence of prefetchw wasn't replaced
with net_prefetchw.
This commit fixes this last occurrence of prefetchw in
mlx5e_tx_mpwqe_session_start, making the same change that was done in
mlx5e_xdp_mpwqe_session_start.
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 38a23d209b33..373668068071 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -486,7 +486,7 @@ static void mlx5e_tx_mpwqe_session_start(struct mlx5e_txqsq *sq,
pi = mlx5e_txqsq_get_next_pi(sq, MLX5E_TX_MPW_MAX_WQEBBS);
wqe = MLX5E_TX_FETCH_WQE(sq, pi);
- prefetchw(wqe->data);
+ net_prefetchw(wqe->data);
*session = (struct mlx5e_tx_mpwqe) {
.wqe = wqe,
--
2.30.2
From: Hoang Le <[email protected]>
[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]
(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:
net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24: expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24: got int
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/netlink_compat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 1c7aa51cc2a3..49e893313652 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -693,7 +693,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg,
if (err)
return err;
- link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]);
+ link_info.dest = htonl(nla_get_flag(link[TIPC_NLA_LINK_DEST]));
link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP]));
nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME],
TIPC_MAX_LINK_NAME);
--
2.30.2
From: Sean Christopherson <[email protected]>
commit c5e2184d1544f9e56140791eff1a351bea2e63b9 upstream.
Remove the update_pte() shadow paging logic, which was obsoleted by
commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"), but never
removed. As pointed out by Yu, KVM never write protects leaf page
tables for the purposes of shadow paging, and instead marks their
associated shadow page as unsync so that the guest can write PTEs at
will.
The update_pte() path, which predates the unsync logic, optimizes COW
scenarios by refreshing leaf SPTEs when they are written, as opposed to
zapping the SPTE, restarting the guest, and installing the new SPTE on
the subsequent fault. Since KVM no longer write-protects leaf page
tables, update_pte() is unreachable and can be dropped.
Reported-by: Yu Zhang <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 3 --
arch/x86/kvm/mmu/mmu.c | 49 +---------------------------------------
arch/x86/kvm/x86.c | 1
3 files changed, 2 insertions(+), 51 deletions(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -358,8 +358,6 @@ struct kvm_mmu {
int (*sync_page)(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp);
void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva, hpa_t root_hpa);
- void (*update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
- u64 *spte, const void *pte);
hpa_t root_hpa;
gpa_t root_pgd;
union kvm_mmu_role mmu_role;
@@ -1019,7 +1017,6 @@ struct kvm_arch {
struct kvm_vm_stat {
ulong mmu_shadow_zapped;
ulong mmu_pte_write;
- ulong mmu_pte_updated;
ulong mmu_pde_zapped;
ulong mmu_flooded;
ulong mmu_recycled;
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -1715,13 +1715,6 @@ static int nonpaging_sync_page(struct kv
return 0;
}
-static void nonpaging_update_pte(struct kvm_vcpu *vcpu,
- struct kvm_mmu_page *sp, u64 *spte,
- const void *pte)
-{
- WARN_ON(1);
-}
-
#define KVM_PAGE_ARRAY_NR 16
struct kvm_mmu_pages {
@@ -3820,7 +3813,6 @@ static void nonpaging_init_context(struc
context->gva_to_gpa = nonpaging_gva_to_gpa;
context->sync_page = nonpaging_sync_page;
context->invlpg = NULL;
- context->update_pte = nonpaging_update_pte;
context->root_level = 0;
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = true;
@@ -4402,7 +4394,6 @@ static void paging64_init_context_common
context->gva_to_gpa = paging64_gva_to_gpa;
context->sync_page = paging64_sync_page;
context->invlpg = paging64_invlpg;
- context->update_pte = paging64_update_pte;
context->shadow_root_level = level;
context->direct_map = false;
}
@@ -4431,7 +4422,6 @@ static void paging32_init_context(struct
context->gva_to_gpa = paging32_gva_to_gpa;
context->sync_page = paging32_sync_page;
context->invlpg = paging32_invlpg;
- context->update_pte = paging32_update_pte;
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = false;
}
@@ -4513,7 +4503,6 @@ static void init_kvm_tdp_mmu(struct kvm_
context->page_fault = kvm_tdp_page_fault;
context->sync_page = nonpaging_sync_page;
context->invlpg = NULL;
- context->update_pte = nonpaging_update_pte;
context->shadow_root_level = kvm_mmu_get_tdp_level(vcpu);
context->direct_map = true;
context->get_guest_pgd = get_cr3;
@@ -4690,7 +4679,6 @@ void kvm_init_shadow_ept_mmu(struct kvm_
context->gva_to_gpa = ept_gva_to_gpa;
context->sync_page = ept_sync_page;
context->invlpg = ept_invlpg;
- context->update_pte = ept_update_pte;
context->root_level = level;
context->direct_map = false;
context->mmu_role.as_u64 = new_role.as_u64;
@@ -4838,19 +4826,6 @@ void kvm_mmu_unload(struct kvm_vcpu *vcp
}
EXPORT_SYMBOL_GPL(kvm_mmu_unload);
-static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
- struct kvm_mmu_page *sp, u64 *spte,
- const void *new)
-{
- if (sp->role.level != PG_LEVEL_4K) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
-
- ++vcpu->kvm->stat.mmu_pte_updated;
- vcpu->arch.mmu->update_pte(vcpu, sp, spte, new);
-}
-
static bool need_remote_flush(u64 old, u64 new)
{
if (!is_shadow_present_pte(old))
@@ -4966,22 +4941,6 @@ static u64 *get_written_sptes(struct kvm
return spte;
}
-/*
- * Ignore various flags when determining if a SPTE can be immediately
- * overwritten for the current MMU.
- * - level: explicitly checked in mmu_pte_write_new_pte(), and will never
- * match the current MMU role, as MMU's level tracks the root level.
- * - access: updated based on the new guest PTE
- * - quadrant: handled by get_written_sptes()
- * - invalid: always false (loop only walks valid shadow pages)
- */
-static const union kvm_mmu_page_role role_ign = {
- .level = 0xf,
- .access = 0x7,
- .quadrant = 0x3,
- .invalid = 0x1,
-};
-
static void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
const u8 *new, int bytes,
struct kvm_page_track_notifier_node *node)
@@ -5032,14 +4991,10 @@ static void kvm_mmu_pte_write(struct kvm
local_flush = true;
while (npte--) {
- u32 base_role = vcpu->arch.mmu->mmu_role.base.word;
-
entry = *spte;
mmu_page_zap_pte(vcpu->kvm, sp, spte, NULL);
- if (gentry &&
- !((sp->role.word ^ base_role) & ~role_ign.word) &&
- rmap_can_add(vcpu))
- mmu_pte_write_new_pte(vcpu, sp, spte, &gentry);
+ if (gentry && sp->role.level != PG_LEVEL_4K)
+ ++vcpu->kvm->stat.mmu_pde_zapped;
if (need_remote_flush(entry, *spte))
remote_flush = true;
++spte;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -233,7 +233,6 @@ struct kvm_stats_debugfs_item debugfs_en
VCPU_STAT("halt_poll_fail_ns", halt_poll_fail_ns),
VM_STAT("mmu_shadow_zapped", mmu_shadow_zapped),
VM_STAT("mmu_pte_write", mmu_pte_write),
- VM_STAT("mmu_pte_updated", mmu_pte_updated),
VM_STAT("mmu_pde_zapped", mmu_pde_zapped),
VM_STAT("mmu_flooded", mmu_flooded),
VM_STAT("mmu_recycled", mmu_recycled),
From: Jonathan McDowell <[email protected]>
[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]
Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver. This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.
(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)
Signed-off-by: Jonathan McDowell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index bf3250e0e59c..749585fe6fc9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -352,6 +352,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
plat_dat->multicast_filter_bins = 0;
+ plat_dat->tx_fifo_size = 8192;
+ plat_dat->rx_fifo_size = 8192;
err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (err)
--
2.30.2
From: Mikhail Durnev <[email protected]>
[ Upstream commit 19c6a63ced5e07e40f3a5255cb1f0fe0d3be7b14 ]
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in
some cases, e.g. when the backend output rate is set to some value higher
than 48000 Hz and the input rate is 8000 Hz. So passing the value returned
by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in
"FSO/FSI ratio error" and playing no audio at all while the userland
is not properly notified about the issue.
If SRC is unable to convert the requested sample rate to the sample rate
the backend is using, then the requested sample rate should be adjusted in
rsnd_hw_params. The userland will be notified about that change in the
returned hw_params structure.
Signed-off-by: Mikhail Durnev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/core.c | 69 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 68 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 6e670b3e92a0..289928d4c0c9 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1428,8 +1428,75 @@ static int rsnd_hw_params(struct snd_soc_component *component,
}
if (io->converted_chan)
dev_dbg(dev, "convert channels = %d\n", io->converted_chan);
- if (io->converted_rate)
+ if (io->converted_rate) {
+ /*
+ * SRC supports convert rates from params_rate(hw_params)/k_down
+ * to params_rate(hw_params)*k_up, where k_up is always 6, and
+ * k_down depends on number of channels and SRC unit.
+ * So all SRC units can upsample audio up to 6 times regardless
+ * its number of channels. And all SRC units can downsample
+ * 2 channel audio up to 6 times too.
+ */
+ int k_up = 6;
+ int k_down = 6;
+ int channel;
+ struct rsnd_mod *src_mod = rsnd_io_to_mod_src(io);
+
dev_dbg(dev, "convert rate = %d\n", io->converted_rate);
+
+ channel = io->converted_chan ? io->converted_chan :
+ params_channels(hw_params);
+
+ switch (rsnd_mod_id(src_mod)) {
+ /*
+ * SRC0 can downsample 4, 6 and 8 channel audio up to 4 times.
+ * SRC1, SRC3 and SRC4 can downsample 4 channel audio
+ * up to 4 times.
+ * SRC1, SRC3 and SRC4 can downsample 6 and 8 channel audio
+ * no more than twice.
+ */
+ case 1:
+ case 3:
+ case 4:
+ if (channel > 4) {
+ k_down = 2;
+ break;
+ }
+ fallthrough;
+ case 0:
+ if (channel > 2)
+ k_down = 4;
+ break;
+
+ /* Other SRC units do not support more than 2 channels */
+ default:
+ if (channel > 2)
+ return -EINVAL;
+ }
+
+ if (params_rate(hw_params) > io->converted_rate * k_down) {
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min =
+ io->converted_rate * k_down;
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max =
+ io->converted_rate * k_down;
+ hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE;
+ } else if (params_rate(hw_params) * k_up < io->converted_rate) {
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min =
+ (io->converted_rate + k_up - 1) / k_up;
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max =
+ (io->converted_rate + k_up - 1) / k_up;
+ hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE;
+ }
+
+ /*
+ * TBD: Max SRC input and output rates also depend on number
+ * of channels and SRC unit:
+ * SRC1, SRC3 and SRC4 do not support more than 128kHz
+ * for 6 channel and 96kHz for 8 channel audio.
+ * Perhaps this function should return EINVAL if the input or
+ * the output rate exceeds the limitation.
+ */
+ }
}
return rsnd_dai_call(hw_params, io, substream, hw_params);
--
2.30.2
From: Lai Jiangshan <[email protected]>
commit a217a6593cec8b315d4c2f344bae33660b39b703 upstream.
In VMX, the host NMI handler needs to be invoked after NMI VM-Exit.
Before commit 1a5488ef0dcf6 ("KVM: VMX: Invoke NMI handler via indirect
call instead of INTn"), this was done by INTn ("int $2"). But INTn
microcode is relatively expensive, so the commit reworked NMI VM-Exit
handling to invoke the kernel handler by function call.
But this missed a detail. The NMI entry point for direct invocation is
fetched from the IDT table and called on the kernel stack. But on 64-bit
the NMI entry installed in the IDT expects to be invoked on the IST stack.
It relies on the "NMI executing" variable on the IST stack to work
correctly, which is at a fixed position in the IST stack. When the entry
point is unexpectedly called on the kernel stack, the RSP-addressed "NMI
executing" variable is obviously also on the kernel stack and is
"uninitialized" and can cause the NMI entry code to run in the wrong way.
Provide a non-ist entry point for VMX which shares the C-function with
the regular NMI entry and invoke the new asm entry point instead.
On 32-bit this just maps to the regular NMI entry point as 32-bit has no
ISTs and is not affected.
[ tglx: Made it independent for backporting, massaged changelog ]
Fixes: 1a5488ef0dcf6 ("KVM: VMX: Invoke NMI handler via indirect call instead of INTn")
Signed-off-by: Lai Jiangshan <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Lai Jiangshan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/idtentry.h | 15 +++++++++++++++
arch/x86/kernel/nmi.c | 10 ++++++++++
arch/x86/kvm/vmx/vmx.c | 16 +++++++++-------
3 files changed, 34 insertions(+), 7 deletions(-)
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -588,6 +588,21 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_MC, exc_ma
#endif
/* NMI */
+
+#if defined(CONFIG_X86_64) && IS_ENABLED(CONFIG_KVM_INTEL)
+/*
+ * Special NOIST entry point for VMX which invokes this on the kernel
+ * stack. asm_exc_nmi() requires an IST to work correctly vs. the NMI
+ * 'executing' marker.
+ *
+ * On 32bit this just uses the regular NMI entry point because 32-bit does
+ * not have ISTs.
+ */
+DECLARE_IDTENTRY(X86_TRAP_NMI, exc_nmi_noist);
+#else
+#define asm_exc_nmi_noist asm_exc_nmi
+#endif
+
DECLARE_IDTENTRY_NMI(X86_TRAP_NMI, exc_nmi);
#ifdef CONFIG_XEN_PV
DECLARE_IDTENTRY_RAW(X86_TRAP_NMI, xenpv_exc_nmi);
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -524,6 +524,16 @@ nmi_restart:
mds_user_clear_cpu_buffers();
}
+#if defined(CONFIG_X86_64) && IS_ENABLED(CONFIG_KVM_INTEL)
+DEFINE_IDTENTRY_RAW(exc_nmi_noist)
+{
+ exc_nmi(regs);
+}
+#endif
+#if IS_MODULE(CONFIG_KVM_INTEL)
+EXPORT_SYMBOL_GPL(asm_exc_nmi_noist);
+#endif
+
void stop_nmi(void)
{
ignore_nmis++;
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -36,6 +36,7 @@
#include <asm/debugreg.h>
#include <asm/desc.h>
#include <asm/fpu/internal.h>
+#include <asm/idtentry.h>
#include <asm/io.h>
#include <asm/irq_remapping.h>
#include <asm/kexec.h>
@@ -6354,18 +6355,17 @@ static void vmx_apicv_post_state_restore
void vmx_do_interrupt_nmi_irqoff(unsigned long entry);
-static void handle_interrupt_nmi_irqoff(struct kvm_vcpu *vcpu, u32 intr_info)
+static void handle_interrupt_nmi_irqoff(struct kvm_vcpu *vcpu,
+ unsigned long entry)
{
- unsigned int vector = intr_info & INTR_INFO_VECTOR_MASK;
- gate_desc *desc = (gate_desc *)host_idt_base + vector;
-
kvm_before_interrupt(vcpu);
- vmx_do_interrupt_nmi_irqoff(gate_offset(desc));
+ vmx_do_interrupt_nmi_irqoff(entry);
kvm_after_interrupt(vcpu);
}
static void handle_exception_nmi_irqoff(struct vcpu_vmx *vmx)
{
+ const unsigned long nmi_entry = (unsigned long)asm_exc_nmi_noist;
u32 intr_info = vmx_get_intr_info(&vmx->vcpu);
/* if exit due to PF check for async PF */
@@ -6376,18 +6376,20 @@ static void handle_exception_nmi_irqoff(
kvm_machine_check();
/* We need to handle NMIs before interrupts are enabled */
else if (is_nmi(intr_info))
- handle_interrupt_nmi_irqoff(&vmx->vcpu, intr_info);
+ handle_interrupt_nmi_irqoff(&vmx->vcpu, nmi_entry);
}
static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu)
{
u32 intr_info = vmx_get_intr_info(vcpu);
+ unsigned int vector = intr_info & INTR_INFO_VECTOR_MASK;
+ gate_desc *desc = (gate_desc *)host_idt_base + vector;
if (WARN_ONCE(!is_external_intr(intr_info),
"KVM: unexpected VM-Exit interrupt info: 0x%x", intr_info))
return;
- handle_interrupt_nmi_irqoff(vcpu, intr_info);
+ handle_interrupt_nmi_irqoff(vcpu, gate_offset(desc));
}
static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu)
From: Tong Zhang <[email protected]>
[ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ]
hdspm wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device
[ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.795181] Call Trace:
[ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm]
[ 1.795595] release_card_device+0x4b/0x80 [snd]
[ 1.795860] device_release+0x3b/0xa0
[ 1.796072] kobject_put+0x94/0x1b0
[ 1.796260] put_device+0x13/0x20
[ 1.796438] snd_card_free+0x61/0x90 [snd]
[ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdspm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 4a1f576dd9cf..51c3c6a08a1c 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6891,7 +6891,8 @@ static int snd_hdspm_free(struct hdspm * hdspm)
if (hdspm->port)
pci_release_regions(hdspm->pci);
- pci_disable_device(hdspm->pci);
+ if (pci_is_enabled(hdspm->pci))
+ pci_disable_device(hdspm->pci);
return 0;
}
--
2.30.2
From: Takashi Sakamoto <[email protected]>
[ Upstream commit d2b6f15bc18ac8fbce25398290774c21f5b2cd44 ]
Current implementation of bebob driver doesn't correctly handle the case
that the device has multiple MIDI ports. The cause is the number of MIDI
conformant data channels is passed to AM824 data block processing layer.
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/bebob/bebob_stream.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c
index bbae04793c50..c18017e0a3d9 100644
--- a/sound/firewire/bebob/bebob_stream.c
+++ b/sound/firewire/bebob/bebob_stream.c
@@ -517,20 +517,22 @@ int snd_bebob_stream_init_duplex(struct snd_bebob *bebob)
static int keep_resources(struct snd_bebob *bebob, struct amdtp_stream *stream,
unsigned int rate, unsigned int index)
{
- struct snd_bebob_stream_formation *formation;
+ unsigned int pcm_channels;
+ unsigned int midi_ports;
struct cmp_connection *conn;
int err;
if (stream == &bebob->tx_stream) {
- formation = bebob->tx_stream_formations + index;
+ pcm_channels = bebob->tx_stream_formations[index].pcm;
+ midi_ports = bebob->midi_input_ports;
conn = &bebob->out_conn;
} else {
- formation = bebob->rx_stream_formations + index;
+ pcm_channels = bebob->rx_stream_formations[index].pcm;
+ midi_ports = bebob->midi_output_ports;
conn = &bebob->in_conn;
}
- err = amdtp_am824_set_parameters(stream, rate, formation->pcm,
- formation->midi, false);
+ err = amdtp_am824_set_parameters(stream, rate, pcm_channels, midi_ports, false);
if (err < 0)
return err;
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ]
hdsp wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device
[ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.766985] Call Trace:
[ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp]
[ 1.767388] release_card_device+0x4b/0x80 [snd]
[ 1.767639] device_release+0x3b/0xa0
[ 1.767838] kobject_put+0x94/0x1b0
[ 1.768027] put_device+0x13/0x20
[ 1.768207] snd_card_free+0x61/0x90 [snd]
[ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdsp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index cea53a878c36..4aee30db034d 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -5321,7 +5321,8 @@ static int snd_hdsp_free(struct hdsp *hdsp)
if (hdsp->port)
pci_release_regions(hdsp->pci);
- pci_disable_device(hdsp->pci);
+ if (pci_is_enabled(hdsp->pci))
+ pci_disable_device(hdsp->pci);
return 0;
}
--
2.30.2
From: Archie Pusaka <[email protected]>
[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 1ab27b90ddcb..3e18cddfbcc5 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -516,7 +516,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+
chan->conf_state = 0;
+ set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
--
2.30.2
From: Tetsuo Handa <[email protected]>
[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]
syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 3e18cddfbcc5..cdc386337173 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -451,6 +451,8 @@ struct l2cap_chan *l2cap_chan_create(void)
if (!chan)
return NULL;
+ skb_queue_head_init(&chan->tx_q);
+ skb_queue_head_init(&chan->srej_q);
mutex_init(&chan->lock);
/* Set default lock nesting level */
--
2.30.2
From: Wolfram Sang <[email protected]>
[ Upstream commit 71581562ee36032d2d574a9b23ad4af6d6a64cf7 ]
The buggy parameters currently get caught later, but emit a noisy WARN.
Userspace should not be able to trigger this, so add similar checks much
earlier. Also avoids some unneeded code paths, of course. Apply kernel
coding stlye to a comment while here.
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/i2c-dev.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 6ceb11cc4be1..6ef38a8ee95c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -440,8 +440,13 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
sizeof(rdwr_arg)))
return -EFAULT;
- /* Put an arbitrary limit on the number of messages that can
- * be sent at once */
+ if (!rdwr_arg.msgs || rdwr_arg.nmsgs == 0)
+ return -EINVAL;
+
+ /*
+ * Put an arbitrary limit on the number of messages that can
+ * be sent at once
+ */
if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS)
return -EINVAL;
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit 6215afcb9a7e35cef334dc0ae7f998cc72c8465f ]
A make W=1 build complains that:
net/sched/cls_flower.c:214:20: warning: cast from restricted __be16
net/sched/cls_flower.c:214:20: warning: incorrect type in argument 1 (different base types)
net/sched/cls_flower.c:214:20: expected unsigned short [usertype] val
net/sched/cls_flower.c:214:20: got restricted __be16 [usertype] dst
This is because we use htons on struct flow_dissector_key_ports members
src and dst, which are defined as __be16, so they are already in network
byte order, not host. The byte swap function for the other direction
should have been used.
Because htons and ntohs do the same thing (either both swap, or none
does), this change has no functional effect except to silence the
warnings.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/cls_flower.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c
index 14316ba9b3b3..a5212a3f86e2 100644
--- a/net/sched/cls_flower.c
+++ b/net/sched/cls_flower.c
@@ -209,16 +209,16 @@ static bool fl_range_port_dst_cmp(struct cls_fl_filter *filter,
struct fl_flow_key *key,
struct fl_flow_key *mkey)
{
- __be16 min_mask, max_mask, min_val, max_val;
+ u16 min_mask, max_mask, min_val, max_val;
- min_mask = htons(filter->mask->key.tp_range.tp_min.dst);
- max_mask = htons(filter->mask->key.tp_range.tp_max.dst);
- min_val = htons(filter->key.tp_range.tp_min.dst);
- max_val = htons(filter->key.tp_range.tp_max.dst);
+ min_mask = ntohs(filter->mask->key.tp_range.tp_min.dst);
+ max_mask = ntohs(filter->mask->key.tp_range.tp_max.dst);
+ min_val = ntohs(filter->key.tp_range.tp_min.dst);
+ max_val = ntohs(filter->key.tp_range.tp_max.dst);
if (min_mask && max_mask) {
- if (htons(key->tp_range.tp.dst) < min_val ||
- htons(key->tp_range.tp.dst) > max_val)
+ if (ntohs(key->tp_range.tp.dst) < min_val ||
+ ntohs(key->tp_range.tp.dst) > max_val)
return false;
/* skb does not have min and max values */
@@ -232,16 +232,16 @@ static bool fl_range_port_src_cmp(struct cls_fl_filter *filter,
struct fl_flow_key *key,
struct fl_flow_key *mkey)
{
- __be16 min_mask, max_mask, min_val, max_val;
+ u16 min_mask, max_mask, min_val, max_val;
- min_mask = htons(filter->mask->key.tp_range.tp_min.src);
- max_mask = htons(filter->mask->key.tp_range.tp_max.src);
- min_val = htons(filter->key.tp_range.tp_min.src);
- max_val = htons(filter->key.tp_range.tp_max.src);
+ min_mask = ntohs(filter->mask->key.tp_range.tp_min.src);
+ max_mask = ntohs(filter->mask->key.tp_range.tp_max.src);
+ min_val = ntohs(filter->key.tp_range.tp_min.src);
+ max_val = ntohs(filter->key.tp_range.tp_max.src);
if (min_mask && max_mask) {
- if (htons(key->tp_range.tp.src) < min_val ||
- htons(key->tp_range.tp.src) > max_val)
+ if (ntohs(key->tp_range.tp.src) < min_val ||
+ ntohs(key->tp_range.tp.src) > max_val)
return false;
/* skb does not have min and max values */
@@ -779,16 +779,16 @@ static int fl_set_key_port_range(struct nlattr **tb, struct fl_flow_key *key,
TCA_FLOWER_UNSPEC, sizeof(key->tp_range.tp_max.src));
if (mask->tp_range.tp_min.dst && mask->tp_range.tp_max.dst &&
- htons(key->tp_range.tp_max.dst) <=
- htons(key->tp_range.tp_min.dst)) {
+ ntohs(key->tp_range.tp_max.dst) <=
+ ntohs(key->tp_range.tp_min.dst)) {
NL_SET_ERR_MSG_ATTR(extack,
tb[TCA_FLOWER_KEY_PORT_DST_MIN],
"Invalid destination port range (min must be strictly smaller than max)");
return -EINVAL;
}
if (mask->tp_range.tp_min.src && mask->tp_range.tp_max.src &&
- htons(key->tp_range.tp_max.src) <=
- htons(key->tp_range.tp_min.src)) {
+ ntohs(key->tp_range.tp_max.src) <=
+ ntohs(key->tp_range.tp_min.src)) {
NL_SET_ERR_MSG_ATTR(extack,
tb[TCA_FLOWER_KEY_PORT_SRC_MIN],
"Invalid source port range (min must be strictly smaller than max)");
--
2.30.2
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit 0353b4a96b7a9f60fe20d1b3ebd4931a4085f91c ]
Recently we had an interop issue where RARP packets got suppressed with
bridge neigh suppression enabled, but the check in the code was meant to
suppress GARP. Exclude RARP packets from it which would allow some VMWare
setups to work, to quote the report:
"Those RARP packets usually get generated by vMware to notify physical
switches when vMotion occurs. vMware may use random sip/tip or just use
sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep
and other times get dropped by the logic"
Reported-by: Amer Abdalamer <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_arp_nd_proxy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/bridge/br_arp_nd_proxy.c b/net/bridge/br_arp_nd_proxy.c
index dfec65eca8a6..3db1def4437b 100644
--- a/net/bridge/br_arp_nd_proxy.c
+++ b/net/bridge/br_arp_nd_proxy.c
@@ -160,7 +160,9 @@ void br_do_proxy_suppress_arp(struct sk_buff *skb, struct net_bridge *br,
if (br_opt_get(br, BROPT_NEIGH_SUPPRESS_ENABLED)) {
if (p && (p->flags & BR_NEIGH_SUPPRESS))
return;
- if (ipv4_is_zeronet(sip) || sip == tip) {
+ if (parp->ar_op != htons(ARPOP_RREQUEST) &&
+ parp->ar_op != htons(ARPOP_RREPLY) &&
+ (ipv4_is_zeronet(sip) || sip == tip)) {
/* prevent flooding to neigh suppress ports */
BR_INPUT_SKB_CB(skb)->proxyarp_replied = 1;
return;
--
2.30.2
From: Archie Pusaka <[email protected]>
[ Upstream commit 3af70b39fa2d415dc86c370e5b24ddb9fdacbd6f ]
There is a possibility of receiving a zapped sock on
l2cap_sock_connect(). This could lead to interesting crashes, one
such case is tearing down an already tore l2cap_sock as is happened
with this call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
register_lock_class kernel/locking/lockdep.c:792 [inline]
register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742
__lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105
lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline]
_raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:307 [inline]
lock_sock_nested+0x44/0xfa net/core/sock.c:2518
l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345
l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598
l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756
l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429
process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064
worker_thread+0x5a5/0x773 kernel/workqueue.c:2196
kthread+0x291/0x2a6 kernel/kthread.c:211
ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index f1b1edd0b697..c99d65ef13b1 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -179,9 +179,17 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct sockaddr_l2 la;
int len, err = 0;
+ bool zapped;
BT_DBG("sk %p", sk);
+ lock_sock(sk);
+ zapped = sock_flag(sk, SOCK_ZAPPED);
+ release_sock(sk);
+
+ if (zapped)
+ return -EINVAL;
+
if (!addr || alen < offsetofend(struct sockaddr, sa_family) ||
addr->sa_family != AF_BLUETOOTH)
return -EINVAL;
--
2.30.2
From: Russell Currey <[email protected]>
[ Upstream commit 3a72c94ebfb1f171eba0715998010678a09ec796 ]
The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1
perf event to count L1D misses. The value of this event has changed
over time:
- Power7 uses 0x400f0
- Power8 and Power9 use both 0x400f0 and 0x3e054
- Power10 uses only 0x3e054
Rather than relying on raw values, configure perf to count L1D read
misses in the most explicit way available.
This fixes the selftests to work on systems without 0x400f0 as
PM_LD_MISS_L1, and should change no behaviour for systems that the tests
already worked on.
The only potential downside is that referring to a specific perf event
requires PMU support implemented in the kernel for that platform.
Signed-off-by: Russell Currey <[email protected]>
Acked-by: Daniel Axtens <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/security/entry_flush.c | 2 +-
tools/testing/selftests/powerpc/security/flush_utils.h | 4 ++++
tools/testing/selftests/powerpc/security/rfi_flush.c | 2 +-
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/powerpc/security/entry_flush.c b/tools/testing/selftests/powerpc/security/entry_flush.c
index 78cf914fa321..68ce377b205e 100644
--- a/tools/testing/selftests/powerpc/security/entry_flush.c
+++ b/tools/testing/selftests/powerpc/security/entry_flush.c
@@ -53,7 +53,7 @@ int entry_flush_test(void)
entry_flush = entry_flush_orig;
- fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
+ fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1);
FAIL_IF(fd < 0);
p = (char *)memalign(zero_size, CACHELINE_SIZE);
diff --git a/tools/testing/selftests/powerpc/security/flush_utils.h b/tools/testing/selftests/powerpc/security/flush_utils.h
index 07a5eb301466..7a3d60292916 100644
--- a/tools/testing/selftests/powerpc/security/flush_utils.h
+++ b/tools/testing/selftests/powerpc/security/flush_utils.h
@@ -9,6 +9,10 @@
#define CACHELINE_SIZE 128
+#define PERF_L1D_READ_MISS_CONFIG ((PERF_COUNT_HW_CACHE_L1D) | \
+ (PERF_COUNT_HW_CACHE_OP_READ << 8) | \
+ (PERF_COUNT_HW_CACHE_RESULT_MISS << 16))
+
void syscall_loop(char *p, unsigned long iterations,
unsigned long zero_size);
diff --git a/tools/testing/selftests/powerpc/security/rfi_flush.c b/tools/testing/selftests/powerpc/security/rfi_flush.c
index 7565fd786640..f73484a6470f 100644
--- a/tools/testing/selftests/powerpc/security/rfi_flush.c
+++ b/tools/testing/selftests/powerpc/security/rfi_flush.c
@@ -54,7 +54,7 @@ int rfi_flush_test(void)
rfi_flush = rfi_flush_orig;
- fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
+ fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1);
FAIL_IF(fd < 0);
p = (char *)memalign(zero_size, CACHELINE_SIZE);
--
2.30.2
From: Christophe Leroy <[email protected]>
[ Upstream commit a4719f5bb6d7dc220bffdc1b9f5ce5eaa5543581 ]
The check of the emergency context initialisation in
vmap_stack_overflow is buggy for the SMP case, as it
compares r1 with 0 while in the SMP case r1 is offseted
by the CPU id.
Instead of fixing it, just perform static initialisation
of the first emergency context.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/head_32.h | 6 +-----
arch/powerpc/kernel/setup_32.c | 2 +-
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index fef0b34a77c9..f8e3d15ddf69 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -338,11 +338,7 @@ label:
lis r1, emergency_ctx@ha
#endif
lwz r1, emergency_ctx@l(r1)
- cmpwi cr1, r1, 0
- bne cr1, 1f
- lis r1, init_thread_union@ha
- addi r1, r1, init_thread_union@l
-1: addi r1, r1, THREAD_SIZE - INT_FRAME_SIZE
+ addi r1, r1, THREAD_SIZE - INT_FRAME_SIZE
EXCEPTION_PROLOG_2
SAVE_NVGPRS(r11)
addi r3, r1, STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 057d6b8e9bb0..e7f2eb7837fc 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -164,7 +164,7 @@ void __init irqstack_early_init(void)
}
#ifdef CONFIG_VMAP_STACK
-void *emergency_ctx[NR_CPUS] __ro_after_init;
+void *emergency_ctx[NR_CPUS] __ro_after_init = {[0] = &init_stack};
void __init emergency_stack_init(void)
{
--
2.30.2
From: Guangbin Huang <[email protected]>
[ Upstream commit a2ee6fd28a190588e142ad8ea9d40069cd3c9f98 ]
The array size of bd_num_list is a fixed value, it may have potential
overflow risk when array size of hclge_dfx_bd_offset_list is greater
than that fixed value. So modify bd_num_list as a pointer and allocate
memory for it according to array size of hclge_dfx_bd_offset_list.
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 27 ++++++++++++++-----
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b856dbe4db73..98190aa90781 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10845,7 +10845,6 @@ static int hclge_get_64_bit_regs(struct hclge_dev *hdev, u32 regs_num,
#define REG_LEN_PER_LINE (REG_NUM_PER_LINE * sizeof(u32))
#define REG_SEPARATOR_LINE 1
#define REG_NUM_REMAIN_MASK 3
-#define BD_LIST_MAX_NUM 30
int hclge_query_bd_num_cmd_send(struct hclge_dev *hdev, struct hclge_desc *desc)
{
@@ -10939,15 +10938,19 @@ static int hclge_get_dfx_reg_len(struct hclge_dev *hdev, int *len)
{
u32 dfx_reg_type_num = ARRAY_SIZE(hclge_dfx_bd_offset_list);
int data_len_per_desc, bd_num, i;
- int bd_num_list[BD_LIST_MAX_NUM];
+ int *bd_num_list;
u32 data_len;
int ret;
+ bd_num_list = kcalloc(dfx_reg_type_num, sizeof(int), GFP_KERNEL);
+ if (!bd_num_list)
+ return -ENOMEM;
+
ret = hclge_get_dfx_reg_bd_num(hdev, bd_num_list, dfx_reg_type_num);
if (ret) {
dev_err(&hdev->pdev->dev,
"Get dfx reg bd num fail, status is %d.\n", ret);
- return ret;
+ goto out;
}
data_len_per_desc = sizeof_field(struct hclge_desc, data);
@@ -10958,6 +10961,8 @@ static int hclge_get_dfx_reg_len(struct hclge_dev *hdev, int *len)
*len += (data_len / REG_LEN_PER_LINE + 1) * REG_LEN_PER_LINE;
}
+out:
+ kfree(bd_num_list);
return ret;
}
@@ -10965,16 +10970,20 @@ static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data)
{
u32 dfx_reg_type_num = ARRAY_SIZE(hclge_dfx_bd_offset_list);
int bd_num, bd_num_max, buf_len, i;
- int bd_num_list[BD_LIST_MAX_NUM];
struct hclge_desc *desc_src;
+ int *bd_num_list;
u32 *reg = data;
int ret;
+ bd_num_list = kcalloc(dfx_reg_type_num, sizeof(int), GFP_KERNEL);
+ if (!bd_num_list)
+ return -ENOMEM;
+
ret = hclge_get_dfx_reg_bd_num(hdev, bd_num_list, dfx_reg_type_num);
if (ret) {
dev_err(&hdev->pdev->dev,
"Get dfx reg bd num fail, status is %d.\n", ret);
- return ret;
+ goto out;
}
bd_num_max = bd_num_list[0];
@@ -10983,8 +10992,10 @@ static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data)
buf_len = sizeof(*desc_src) * bd_num_max;
desc_src = kzalloc(buf_len, GFP_KERNEL);
- if (!desc_src)
- return -ENOMEM;
+ if (!desc_src) {
+ ret = -ENOMEM;
+ goto out;
+ }
for (i = 0; i < dfx_reg_type_num; i++) {
bd_num = bd_num_list[i];
@@ -11000,6 +11011,8 @@ static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data)
}
kfree(desc_src);
+out:
+ kfree(bd_num_list);
return ret;
}
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()
[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x331/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmmsg+0x195/0x470 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index ecfeffc06c55..82961ff4da9b 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -192,7 +192,6 @@ static int vti6_tnl_create2(struct net_device *dev)
strcpy(t->parms.name, dev->name);
- dev_hold(dev);
vti6_tnl_link(ip6n, t);
return 0;
@@ -931,6 +930,7 @@ static inline int vti6_dev_init_gen(struct net_device *dev)
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ dev_hold(dev);
return 0;
}
--
2.30.2
From: Yunsheng Lin <[email protected]>
[ Upstream commit d5d5e0193ee8f88efbbc7f1471087255657bc19a ]
Currently hns3 driver only handle the xmit skb with one level of
fraglist skb, add handling for multi level by calling hns3_tx_bd_num()
recursively when calculating bd num and calling hns3_fill_skb_to_desc()
recursively when filling tx desc.
When the skb has a fraglist level of 24, the skb is simply dropped and
stats.max_recursion_level is added to record the error. Move the stat
handling from hns3_nic_net_xmit() to hns3_nic_maybe_stop_tx() in order
to handle different error stat and add the 'max_recursion_level' and
'hw_limitation' stat.
Note that the max recursive level as 24 is chose according to below:
commit 48a1df65334b ("skbuff: return -EMSGSIZE in skb_to_sgvec to
prevent overflow").
And that we are not able to find a testcase to verify the recursive
fraglist case, so Fixes tag is not provided.
Reported-by: Barry Song <[email protected]>
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 115 +++++++++++-------
.../net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +
.../ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +
3 files changed, 78 insertions(+), 41 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 070bef303d18..051598341968 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1192,23 +1192,21 @@ static unsigned int hns3_skb_bd_num(struct sk_buff *skb, unsigned int *bd_size,
}
static unsigned int hns3_tx_bd_num(struct sk_buff *skb, unsigned int *bd_size,
- u8 max_non_tso_bd_num)
+ u8 max_non_tso_bd_num, unsigned int bd_num,
+ unsigned int recursion_level)
{
+#define HNS3_MAX_RECURSION_LEVEL 24
+
struct sk_buff *frag_skb;
- unsigned int bd_num = 0;
/* If the total len is within the max bd limit */
- if (likely(skb->len <= HNS3_MAX_BD_SIZE && !skb_has_frag_list(skb) &&
+ if (likely(skb->len <= HNS3_MAX_BD_SIZE && !recursion_level &&
+ !skb_has_frag_list(skb) &&
skb_shinfo(skb)->nr_frags < max_non_tso_bd_num))
return skb_shinfo(skb)->nr_frags + 1U;
- /* The below case will always be linearized, return
- * HNS3_MAX_BD_NUM_TSO + 1U to make sure it is linearized.
- */
- if (unlikely(skb->len > HNS3_MAX_TSO_SIZE ||
- (!skb_is_gso(skb) && skb->len >
- HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num))))
- return HNS3_MAX_TSO_BD_NUM + 1U;
+ if (unlikely(recursion_level >= HNS3_MAX_RECURSION_LEVEL))
+ return UINT_MAX;
bd_num = hns3_skb_bd_num(skb, bd_size, bd_num);
@@ -1216,7 +1214,8 @@ static unsigned int hns3_tx_bd_num(struct sk_buff *skb, unsigned int *bd_size,
return bd_num;
skb_walk_frags(skb, frag_skb) {
- bd_num = hns3_skb_bd_num(frag_skb, bd_size, bd_num);
+ bd_num = hns3_tx_bd_num(frag_skb, bd_size, max_non_tso_bd_num,
+ bd_num, recursion_level + 1);
if (bd_num > HNS3_MAX_TSO_BD_NUM)
return bd_num;
}
@@ -1276,6 +1275,43 @@ void hns3_shinfo_pack(struct skb_shared_info *shinfo, __u32 *size)
size[i] = skb_frag_size(&shinfo->frags[i]);
}
+static int hns3_skb_linearize(struct hns3_enet_ring *ring,
+ struct sk_buff *skb,
+ u8 max_non_tso_bd_num,
+ unsigned int bd_num)
+{
+ /* 'bd_num == UINT_MAX' means the skb' fraglist has a
+ * recursion level of over HNS3_MAX_RECURSION_LEVEL.
+ */
+ if (bd_num == UINT_MAX) {
+ u64_stats_update_begin(&ring->syncp);
+ ring->stats.over_max_recursion++;
+ u64_stats_update_end(&ring->syncp);
+ return -ENOMEM;
+ }
+
+ /* The skb->len has exceeded the hw limitation, linearization
+ * will not help.
+ */
+ if (skb->len > HNS3_MAX_TSO_SIZE ||
+ (!skb_is_gso(skb) && skb->len >
+ HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num))) {
+ u64_stats_update_begin(&ring->syncp);
+ ring->stats.hw_limitation++;
+ u64_stats_update_end(&ring->syncp);
+ return -ENOMEM;
+ }
+
+ if (__skb_linearize(skb)) {
+ u64_stats_update_begin(&ring->syncp);
+ ring->stats.sw_err_cnt++;
+ u64_stats_update_end(&ring->syncp);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
static int hns3_nic_maybe_stop_tx(struct hns3_enet_ring *ring,
struct net_device *netdev,
struct sk_buff *skb)
@@ -1285,7 +1321,7 @@ static int hns3_nic_maybe_stop_tx(struct hns3_enet_ring *ring,
unsigned int bd_size[HNS3_MAX_TSO_BD_NUM + 1U];
unsigned int bd_num;
- bd_num = hns3_tx_bd_num(skb, bd_size, max_non_tso_bd_num);
+ bd_num = hns3_tx_bd_num(skb, bd_size, max_non_tso_bd_num, 0, 0);
if (unlikely(bd_num > max_non_tso_bd_num)) {
if (bd_num <= HNS3_MAX_TSO_BD_NUM && skb_is_gso(skb) &&
!hns3_skb_need_linearized(skb, bd_size, bd_num,
@@ -1294,16 +1330,11 @@ static int hns3_nic_maybe_stop_tx(struct hns3_enet_ring *ring,
goto out;
}
- if (__skb_linearize(skb))
+ if (hns3_skb_linearize(ring, skb, max_non_tso_bd_num,
+ bd_num))
return -ENOMEM;
bd_num = hns3_tx_bd_count(skb->len);
- if ((skb_is_gso(skb) && bd_num > HNS3_MAX_TSO_BD_NUM) ||
- (!skb_is_gso(skb) &&
- bd_num > max_non_tso_bd_num)) {
- trace_hns3_over_max_bd(skb);
- return -ENOMEM;
- }
u64_stats_update_begin(&ring->syncp);
ring->stats.tx_copy++;
@@ -1327,6 +1358,10 @@ out:
return bd_num;
}
+ u64_stats_update_begin(&ring->syncp);
+ ring->stats.tx_busy++;
+ u64_stats_update_end(&ring->syncp);
+
return -EBUSY;
}
@@ -1374,6 +1409,7 @@ static int hns3_fill_skb_to_desc(struct hns3_enet_ring *ring,
struct sk_buff *skb, enum hns_desc_type type)
{
unsigned int size = skb_headlen(skb);
+ struct sk_buff *frag_skb;
int i, ret, bd_num = 0;
if (size) {
@@ -1398,6 +1434,15 @@ static int hns3_fill_skb_to_desc(struct hns3_enet_ring *ring,
bd_num += ret;
}
+ skb_walk_frags(skb, frag_skb) {
+ ret = hns3_fill_skb_to_desc(ring, frag_skb,
+ DESC_TYPE_FRAGLIST_SKB);
+ if (unlikely(ret < 0))
+ return ret;
+
+ bd_num += ret;
+ }
+
return bd_num;
}
@@ -1428,8 +1473,6 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
struct hns3_enet_ring *ring = &priv->ring[skb->queue_mapping];
struct netdev_queue *dev_queue;
int pre_ntu, next_to_use_head;
- struct sk_buff *frag_skb;
- int bd_num = 0;
bool doorbell;
int ret;
@@ -1445,15 +1488,8 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
ret = hns3_nic_maybe_stop_tx(ring, netdev, skb);
if (unlikely(ret <= 0)) {
if (ret == -EBUSY) {
- u64_stats_update_begin(&ring->syncp);
- ring->stats.tx_busy++;
- u64_stats_update_end(&ring->syncp);
hns3_tx_doorbell(ring, 0, true);
return NETDEV_TX_BUSY;
- } else if (ret == -ENOMEM) {
- u64_stats_update_begin(&ring->syncp);
- ring->stats.sw_err_cnt++;
- u64_stats_update_end(&ring->syncp);
}
hns3_rl_err(netdev, "xmit error: %d!\n", ret);
@@ -1466,21 +1502,14 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
if (unlikely(ret < 0))
goto fill_err;
+ /* 'ret < 0' means filling error, 'ret == 0' means skb->len is
+ * zero, which is unlikely, and 'ret > 0' means how many tx desc
+ * need to be notified to the hw.
+ */
ret = hns3_fill_skb_to_desc(ring, skb, DESC_TYPE_SKB);
- if (unlikely(ret < 0))
+ if (unlikely(ret <= 0))
goto fill_err;
- bd_num += ret;
-
- skb_walk_frags(skb, frag_skb) {
- ret = hns3_fill_skb_to_desc(ring, frag_skb,
- DESC_TYPE_FRAGLIST_SKB);
- if (unlikely(ret < 0))
- goto fill_err;
-
- bd_num += ret;
- }
-
pre_ntu = ring->next_to_use ? (ring->next_to_use - 1) :
(ring->desc_num - 1);
ring->desc[pre_ntu].tx.bdtp_fe_sc_vld_ra_ri |=
@@ -1491,7 +1520,7 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
dev_queue = netdev_get_tx_queue(netdev, ring->queue_index);
doorbell = __netdev_tx_sent_queue(dev_queue, skb->len,
netdev_xmit_more());
- hns3_tx_doorbell(ring, bd_num, doorbell);
+ hns3_tx_doorbell(ring, ret, doorbell);
return NETDEV_TX_OK;
@@ -1656,11 +1685,15 @@ static void hns3_nic_get_stats64(struct net_device *netdev,
tx_drop += ring->stats.tx_l4_proto_err;
tx_drop += ring->stats.tx_l2l3l4_err;
tx_drop += ring->stats.tx_tso_err;
+ tx_drop += ring->stats.over_max_recursion;
+ tx_drop += ring->stats.hw_limitation;
tx_errors += ring->stats.sw_err_cnt;
tx_errors += ring->stats.tx_vlan_err;
tx_errors += ring->stats.tx_l4_proto_err;
tx_errors += ring->stats.tx_l2l3l4_err;
tx_errors += ring->stats.tx_tso_err;
+ tx_errors += ring->stats.over_max_recursion;
+ tx_errors += ring->stats.hw_limitation;
} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
/* fetch the rx stats */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 1c81dea0da1e..398686b15a82 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -359,6 +359,8 @@ struct ring_stats {
u64 tx_l4_proto_err;
u64 tx_l2l3l4_err;
u64 tx_tso_err;
+ u64 over_max_recursion;
+ u64 hw_limitation;
};
struct {
u64 rx_pkts;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 6b07b2771172..c0aa3be0cdfb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -39,6 +39,8 @@ static const struct hns3_stats hns3_txq_stats[] = {
HNS3_TQP_STAT("l4_proto_err", tx_l4_proto_err),
HNS3_TQP_STAT("l2l3l4_err", tx_l2l3l4_err),
HNS3_TQP_STAT("tso_err", tx_tso_err),
+ HNS3_TQP_STAT("over_max_recursion", over_max_recursion),
+ HNS3_TQP_STAT("hw_limitation", hw_limitation),
};
#define HNS3_TXQ_STATS_COUNT ARRAY_SIZE(hns3_txq_stats)
--
2.30.2
From: Paul M Stillwell Jr <[email protected]>
[ Upstream commit 2ec5638559c13b923250eccf495d2a033fccb3e7 ]
There is an issue when the Tx or Rx ring size increases using
'ethtool -L ...' where the new rings don't get the correct ITR
values because when we rebuild the VSI we don't know that some
of the rings may be new.
Fix this by looking at the original number of rings and
determining if the rings in ice_vsi_rebuild_set_coalesce()
were not present in the original rings received in
ice_vsi_rebuild_get_coalesce().
Also change the code to return an error if we can't allocate
memory for the coalesce data in ice_vsi_rebuild().
Signed-off-by: Paul M Stillwell Jr <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_lib.c | 123 ++++++++++++++++------
drivers/net/ethernet/intel/ice/ice_txrx.h | 2 +
2 files changed, 92 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 170367eaa95a..e1384503dd4d 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2684,38 +2684,46 @@ int ice_vsi_release(struct ice_vsi *vsi)
}
/**
- * ice_vsi_rebuild_update_coalesce - set coalesce for a q_vector
+ * ice_vsi_rebuild_update_coalesce_intrl - set interrupt rate limit for a q_vector
* @q_vector: pointer to q_vector which is being updated
- * @coalesce: pointer to array of struct with stored coalesce
+ * @stored_intrl_setting: original INTRL setting
*
* Set coalesce param in q_vector and update these parameters in HW.
*/
static void
-ice_vsi_rebuild_update_coalesce(struct ice_q_vector *q_vector,
- struct ice_coalesce_stored *coalesce)
+ice_vsi_rebuild_update_coalesce_intrl(struct ice_q_vector *q_vector,
+ u16 stored_intrl_setting)
{
- struct ice_ring_container *rx_rc = &q_vector->rx;
- struct ice_ring_container *tx_rc = &q_vector->tx;
struct ice_hw *hw = &q_vector->vsi->back->hw;
- tx_rc->itr_setting = coalesce->itr_tx;
- rx_rc->itr_setting = coalesce->itr_rx;
-
- /* dynamic ITR values will be updated during Tx/Rx */
- if (!ITR_IS_DYNAMIC(tx_rc->itr_setting))
- wr32(hw, GLINT_ITR(tx_rc->itr_idx, q_vector->reg_idx),
- ITR_REG_ALIGN(tx_rc->itr_setting) >>
- ICE_ITR_GRAN_S);
- if (!ITR_IS_DYNAMIC(rx_rc->itr_setting))
- wr32(hw, GLINT_ITR(rx_rc->itr_idx, q_vector->reg_idx),
- ITR_REG_ALIGN(rx_rc->itr_setting) >>
- ICE_ITR_GRAN_S);
-
- q_vector->intrl = coalesce->intrl;
+ q_vector->intrl = stored_intrl_setting;
wr32(hw, GLINT_RATE(q_vector->reg_idx),
ice_intrl_usec_to_reg(q_vector->intrl, hw->intrl_gran));
}
+/**
+ * ice_vsi_rebuild_update_coalesce_itr - set coalesce for a q_vector
+ * @q_vector: pointer to q_vector which is being updated
+ * @rc: pointer to ring container
+ * @stored_itr_setting: original ITR setting
+ *
+ * Set coalesce param in q_vector and update these parameters in HW.
+ */
+static void
+ice_vsi_rebuild_update_coalesce_itr(struct ice_q_vector *q_vector,
+ struct ice_ring_container *rc,
+ u16 stored_itr_setting)
+{
+ struct ice_hw *hw = &q_vector->vsi->back->hw;
+
+ rc->itr_setting = stored_itr_setting;
+
+ /* dynamic ITR values will be updated during Tx/Rx */
+ if (!ITR_IS_DYNAMIC(rc->itr_setting))
+ wr32(hw, GLINT_ITR(rc->itr_idx, q_vector->reg_idx),
+ ITR_REG_ALIGN(rc->itr_setting) >> ICE_ITR_GRAN_S);
+}
+
/**
* ice_vsi_rebuild_get_coalesce - get coalesce from all q_vectors
* @vsi: VSI connected with q_vectors
@@ -2735,6 +2743,11 @@ ice_vsi_rebuild_get_coalesce(struct ice_vsi *vsi,
coalesce[i].itr_tx = q_vector->tx.itr_setting;
coalesce[i].itr_rx = q_vector->rx.itr_setting;
coalesce[i].intrl = q_vector->intrl;
+
+ if (i < vsi->num_txq)
+ coalesce[i].tx_valid = true;
+ if (i < vsi->num_rxq)
+ coalesce[i].rx_valid = true;
}
return vsi->num_q_vectors;
@@ -2759,17 +2772,59 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,
if ((size && !coalesce) || !vsi)
return;
- for (i = 0; i < size && i < vsi->num_q_vectors; i++)
- ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
- &coalesce[i]);
-
- /* number of q_vectors increased, so assume coalesce settings were
- * changed globally (i.e. ethtool -C eth0 instead of per-queue) and use
- * the previous settings from q_vector 0 for all of the new q_vectors
+ /* There are a couple of cases that have to be handled here:
+ * 1. The case where the number of queue vectors stays the same, but
+ * the number of Tx or Rx rings changes (the first for loop)
+ * 2. The case where the number of queue vectors increased (the
+ * second for loop)
*/
- for (; i < vsi->num_q_vectors; i++)
- ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
- &coalesce[0]);
+ for (i = 0; i < size && i < vsi->num_q_vectors; i++) {
+ /* There are 2 cases to handle here and they are the same for
+ * both Tx and Rx:
+ * if the entry was valid previously (coalesce[i].[tr]x_valid
+ * and the loop variable is less than the number of rings
+ * allocated, then write the previous values
+ *
+ * if the entry was not valid previously, but the number of
+ * rings is less than are allocated (this means the number of
+ * rings increased from previously), then write out the
+ * values in the first element
+ */
+ if (i < vsi->alloc_rxq && coalesce[i].rx_valid)
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->rx,
+ coalesce[i].itr_rx);
+ else if (i < vsi->alloc_rxq)
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->rx,
+ coalesce[0].itr_rx);
+
+ if (i < vsi->alloc_txq && coalesce[i].tx_valid)
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->tx,
+ coalesce[i].itr_tx);
+ else if (i < vsi->alloc_txq)
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->tx,
+ coalesce[0].itr_tx);
+
+ ice_vsi_rebuild_update_coalesce_intrl(vsi->q_vectors[i],
+ coalesce[i].intrl);
+ }
+
+ /* the number of queue vectors increased so write whatever is in
+ * the first element
+ */
+ for (; i < vsi->num_q_vectors; i++) {
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->tx,
+ coalesce[0].itr_tx);
+ ice_vsi_rebuild_update_coalesce_itr(vsi->q_vectors[i],
+ &vsi->q_vectors[i]->rx,
+ coalesce[0].itr_rx);
+ ice_vsi_rebuild_update_coalesce_intrl(vsi->q_vectors[i],
+ coalesce[0].intrl);
+ }
}
/**
@@ -2798,9 +2853,11 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi)
coalesce = kcalloc(vsi->num_q_vectors,
sizeof(struct ice_coalesce_stored), GFP_KERNEL);
- if (coalesce)
- prev_num_q_vectors = ice_vsi_rebuild_get_coalesce(vsi,
- coalesce);
+ if (!coalesce)
+ return -ENOMEM;
+
+ prev_num_q_vectors = ice_vsi_rebuild_get_coalesce(vsi, coalesce);
+
ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
ice_vsi_free_q_vectors(vsi);
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index ff1a1cbd078e..eab7ceae926b 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -351,6 +351,8 @@ struct ice_coalesce_stored {
u16 itr_tx;
u16 itr_rx;
u8 intrl;
+ u8 tx_valid;
+ u8 rx_valid;
};
/* iterator for handling rings in ring container */
--
2.30.2
From: mark-yw.chen <[email protected]>
[ Upstream commit 27e554a4fcd84e499bf0a82122b8c4c3f1de38b6 ]
Adding support LE scatternet and WBS for Mediatek Chip
Signed-off-by: mark-yw.chen <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btusb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2953b96b3ced..175cb1c0d569 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -392,7 +392,9 @@ static const struct usb_device_id blacklist_table[] = {
/* MediaTek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
- .driver_info = BTUSB_MEDIATEK },
+ .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
/* Additional Realtek 8723AE Bluetooth devices */
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit 875c40eadf6ac6644c0f71842a4f30dd9968d281 ]
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 2d887406ca85..1ef0464249d1 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -514,6 +514,23 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Chuwi Hi8 (CWI509) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+ DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"),
+ DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "S806"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit 84cb0d5581b6a7bd5d96013f67e9f2eb0c7b4378 ]
Add a quirk with the jack-detect and dmic settings necessary to make
jack-detect and the builtin mic work on Dell Venue 10 Pro 5055 tablets.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5670.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index a0c8f58d729b..47ce074289ca 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -2908,6 +2908,18 @@ static const struct dmi_system_id dmi_platform_intel_quirks[] = {
RT5670_GPIO1_IS_IRQ |
RT5670_JD_MODE3),
},
+ {
+ .callback = rt5670_quirk_cb,
+ .ident = "Dell Venue 10 Pro 5055",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
+ },
+ .driver_data = (unsigned long *)(RT5670_DMIC_EN |
+ RT5670_DMIC2_INR |
+ RT5670_GPIO1_IS_IRQ |
+ RT5670_JD_MODE1),
+ },
{
.callback = rt5670_quirk_cb,
.ident = "Aegex 10 tablet (RU2)",
--
2.30.2
From: Bence Csókás <[email protected]>
[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]
This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang <[email protected]>
Signed-off-by: Bence Csókás <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/i2c.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 56622658b215..a670ae129f4b 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -687,6 +687,8 @@ struct i2c_adapter_quirks {
#define I2C_AQ_NO_ZERO_LEN_READ BIT(5)
#define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6)
#define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE)
+/* adapter cannot do repeated START */
+#define I2C_AQ_NO_REP_START BIT(7)
/*
* i2c_adapter is the structure used to identify a physical i2c bus along
--
2.30.2
From: Suzuki K Poulose <[email protected]>
[ Upstream commit 2b921b671a8d29c2adb255a86409aad1e3267309 ]
If a graph node is not found for a given node, of_get_next_endpoint()
will emit the following error message :
OF: graph: no port node found in /<node_name>
If the given component doesn't have any explicit connections (e.g,
ETE) we could simply ignore the graph parsing. As for any legacy
component where this is mandatory, the device will not be usable
as before this patch. Updating the DT bindings to Yaml and enabling
the schema checks can detect such issues with the DT.
Cc: Mike Leach <[email protected]>
Cc: Leo Yan <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-platform.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index 3629b7885aca..c594f45319fc 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -90,6 +90,12 @@ static void of_coresight_get_ports_legacy(const struct device_node *node,
struct of_endpoint endpoint;
int in = 0, out = 0;
+ /*
+ * Avoid warnings in of_graph_get_next_endpoint()
+ * if the device doesn't have any graph connections
+ */
+ if (!of_graph_is_present(node))
+ return;
do {
ep = of_graph_get_next_endpoint(node, ep);
if (!ep)
--
2.30.2
From: Tiezhu Yang <[email protected]>
[ Upstream commit 5e65c52ec716af6e8f51dacdaeb4a4d872249af1 ]
Loongson64 processors have a writecombine issue that maybe failed to
write back framebuffer used with ATI Radeon or AMD GPU at times, after
commit 8a08e50cee66 ("drm: Permit video-buffers writecombine mapping
for MIPS"), there exists some errors such as blurred screen and lockup,
and so on.
[ 60.958721] radeon 0000:03:00.0: ring 0 stalled for more than 10079msec
[ 60.965315] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000112 last fence id 0x000000000000011d on ring 0)
[ 60.976525] radeon 0000:03:00.0: ring 3 stalled for more than 10086msec
[ 60.983156] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000374 last fence id 0x00000000000003a8 on ring 3)
As discussed earlier [1], it might be better to disable writecombine
on the CPU detection side because the root cause is unknown now.
Actually, this patch is a temporary solution to just make it work well,
it is not a proper and final solution, I hope someone will have a better
solution to fix this issue in the future.
[1] https://lore.kernel.org/patchwork/patch/1285542/
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/cpu-probe.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 31cb9199197c..e6ae2bcdbeda 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1739,7 +1739,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
}
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
MIPS_ASE_LOONGSON_EXT2);
break;
@@ -1769,7 +1768,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
* register, we correct it here.
*/
c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */
@@ -1780,7 +1778,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
decode_cpucfg(c);
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
default:
panic("Unknown Loongson Processor ID!");
--
2.30.2
From: Mike Marciniszyn <[email protected]>
[ Upstream commit b536d4b2a279733f440c911dc831764690b90050 ]
The completion ring for tx is using the wrong size to size the ring,
oversizing the ring by two orders of magniture.
Correct the allocation size and use kcalloc_node() to allocate the ring.
Fix mistaken GFP defines in similar allocations.
Link: https://lore.kernel.org/r/1617026056-50483-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hfi1/ipoib.h | 3 ++-
drivers/infiniband/hw/hfi1/ipoib_tx.c | 14 +++++++-------
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/ipoib.h b/drivers/infiniband/hw/hfi1/ipoib.h
index b8c9d0a003fb..1ee361c6d11a 100644
--- a/drivers/infiniband/hw/hfi1/ipoib.h
+++ b/drivers/infiniband/hw/hfi1/ipoib.h
@@ -52,8 +52,9 @@ union hfi1_ipoib_flow {
* @producer_lock: producer sync lock
* @consumer_lock: consumer sync lock
*/
+struct ipoib_txreq;
struct hfi1_ipoib_circ_buf {
- void **items;
+ struct ipoib_txreq **items;
unsigned long head;
unsigned long tail;
unsigned long max_items;
diff --git a/drivers/infiniband/hw/hfi1/ipoib_tx.c b/drivers/infiniband/hw/hfi1/ipoib_tx.c
index 9df292b51a05..ab1eefffc14b 100644
--- a/drivers/infiniband/hw/hfi1/ipoib_tx.c
+++ b/drivers/infiniband/hw/hfi1/ipoib_tx.c
@@ -702,14 +702,14 @@ int hfi1_ipoib_txreq_init(struct hfi1_ipoib_dev_priv *priv)
priv->tx_napis = kcalloc_node(dev->num_tx_queues,
sizeof(struct napi_struct),
- GFP_ATOMIC,
+ GFP_KERNEL,
priv->dd->node);
if (!priv->tx_napis)
goto free_txreq_cache;
priv->txqs = kcalloc_node(dev->num_tx_queues,
sizeof(struct hfi1_ipoib_txq),
- GFP_ATOMIC,
+ GFP_KERNEL,
priv->dd->node);
if (!priv->txqs)
goto free_tx_napis;
@@ -741,9 +741,9 @@ int hfi1_ipoib_txreq_init(struct hfi1_ipoib_dev_priv *priv)
priv->dd->node);
txq->tx_ring.items =
- vzalloc_node(array_size(tx_ring_size,
- sizeof(struct ipoib_txreq)),
- priv->dd->node);
+ kcalloc_node(tx_ring_size,
+ sizeof(struct ipoib_txreq *),
+ GFP_KERNEL, priv->dd->node);
if (!txq->tx_ring.items)
goto free_txqs;
@@ -764,7 +764,7 @@ free_txqs:
struct hfi1_ipoib_txq *txq = &priv->txqs[i];
netif_napi_del(txq->napi);
- vfree(txq->tx_ring.items);
+ kfree(txq->tx_ring.items);
}
kfree(priv->txqs);
@@ -817,7 +817,7 @@ void hfi1_ipoib_txreq_deinit(struct hfi1_ipoib_dev_priv *priv)
hfi1_ipoib_drain_tx_list(txq);
netif_napi_del(txq->napi);
(void)hfi1_ipoib_drain_tx_ring(txq, txq->tx_ring.max_items);
- vfree(txq->tx_ring.items);
+ kfree(txq->tx_ring.items);
}
kfree(priv->txqs);
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ]
rme9652 wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device
[ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.759968] Call Trace:
[ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652]
[ 1.760434] release_card_device+0x4b/0x80 [snd]
[ 1.760679] device_release+0x3b/0xa0
[ 1.760874] kobject_put+0x94/0x1b0
[ 1.761059] put_device+0x13/0x20
[ 1.761235] snd_card_free+0x61/0x90 [snd]
[ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/rme9652.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index 7ab10028d9fa..8def24673f35 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -1740,7 +1740,8 @@ static int snd_rme9652_free(struct snd_rme9652 *rme9652)
if (rme9652->port)
pci_release_regions(rme9652->pci);
- pci_disable_device(rme9652->pci);
+ if (pci_is_enabled(rme9652->pci))
+ pci_disable_device(rme9652->pci);
return 0;
}
--
2.30.2
required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,vin-r8a7778
+ - renesas,vin-r8a7779
+ - renesas,rcar-gen2-vin
+ then:
+ required:
+ - port
+ else:
+ required:
+ - renesas,id
+ - ports
additionalProperties: false
From: David Bauer <[email protected]>
[ Upstream commit 4b36cc6b390f18dbc59a45fb4141f90d7dfe2b23 ]
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE),
only the first one to be created will transmit properly encrypteded
frames.
All subsequently created VAPs will sent out frames with the payload left
unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially
disclosing information to a third party.
Disable GTK offloading and encrypt these frames in software to
circumvent this issue. THis only seems to be necessary on MT7610 chips,
as MT7612 is not affected from our testing.
Signed-off-by: David Bauer <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index 11b769af2f8f..0f191bd28417 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -446,6 +446,10 @@ int mt76x02_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
return -EOPNOTSUPP;
+ /* MT76x0 GTK offloading does not work with more than one VIF */
+ if (is_mt76x0(dev) && !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ return -EOPNOTSUPP;
+
msta = sta ? (struct mt76x02_sta *)sta->drv_priv : NULL;
wcid = msta ? &msta->wcid : &mvif->group_wcid;
--
2.30.2
From: Sander Vanheule <[email protected]>
[ Upstream commit 858ebf446bee7d5077bd99488aae617908c3f4fe ]
EEPROM blobs for MT7613BE radios start with (little endian) 0x7663,
which is also the PCI device ID for this device. The EEPROM is required
for the radio to work at useful power levels, otherwise only the lowest
power level is available.
Suggested-by: Georgi Vlaev <[email protected]>
Tested-by: Stijn Segers <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
index f4756bb946c3..e9cdcdc54d5c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
@@ -86,6 +86,7 @@ static int mt7615_check_eeprom(struct mt76_dev *dev)
switch (val) {
case 0x7615:
case 0x7622:
+ case 0x7663:
return 0;
default:
return -EINVAL;
--
2.30.2
From: Shayne Chen <[email protected]>
[ Upstream commit a226ccd04c479ccd23d6927c64bad1b441707f70 ]
Fix incorrect txpower init value for TSSI off chips which causes
too small txpower.
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../wireless/mediatek/mt76/mt7915/eeprom.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
index 7deba7ebd68a..e4c5f968f706 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
@@ -104,7 +104,7 @@ int mt7915_eeprom_get_target_power(struct mt7915_dev *dev,
struct ieee80211_channel *chan,
u8 chain_idx)
{
- int index;
+ int index, target_power;
bool tssi_on;
if (chain_idx > 3)
@@ -113,15 +113,22 @@ int mt7915_eeprom_get_target_power(struct mt7915_dev *dev,
tssi_on = mt7915_tssi_enabled(dev, chan->band);
if (chan->band == NL80211_BAND_2GHZ) {
- index = MT_EE_TX0_POWER_2G + chain_idx * 3 + !tssi_on;
+ index = MT_EE_TX0_POWER_2G + chain_idx * 3;
+ target_power = mt7915_eeprom_read(dev, index);
+
+ if (!tssi_on)
+ target_power += mt7915_eeprom_read(dev, index + 1);
} else {
- int group = tssi_on ?
- mt7915_get_channel_group(chan->hw_value) : 8;
+ int group = mt7915_get_channel_group(chan->hw_value);
+
+ index = MT_EE_TX0_POWER_5G + chain_idx * 12;
+ target_power = mt7915_eeprom_read(dev, index + group);
- index = MT_EE_TX0_POWER_5G + chain_idx * 12 + group;
+ if (!tssi_on)
+ target_power += mt7915_eeprom_read(dev, index + 8);
}
- return mt7915_eeprom_read(dev, index);
+ return target_power;
}
static const u8 sku_cck_delta_map[] = {
--
2.30.2
From: Vivek Goyal <[email protected]>
[ Upstream commit 3466958beb31a8e9d3a1441a34228ed088b84f3e ]
In fuse when a direct/write-through write happens we invalidate attrs
because that might have updated mtime/ctime on server and cached
mtime/ctime will be stale.
What about page writeback path. Looks like we don't invalidate attrs
there. To be consistent, invalidate attrs in writeback path as well. Only
exception is when writeback_cache is enabled. In that case we strust local
mtime/ctime and there is no need to invalidate attrs.
Recently users started experiencing failure of xfstests generic/080,
geneirc/215 and generic/614 on virtiofs. This happened only newer "stat"
utility and not older one. This patch fixes the issue.
So what's the root cause of the issue. Here is detailed explanation.
generic/080 test does mmap write to a file, closes the file and then checks
if mtime has been updated or not. When file is closed, it leads to
flushing of dirty pages (and that should update mtime/ctime on server).
But we did not explicitly invalidate attrs after writeback finished. Still
generic/080 passed so far and reason being that we invalidated atime in
fuse_readpages_end(). This is called in fuse_readahead() path and always
seems to trigger before mmaped write.
So after mmaped write when lstat() is called, it sees that atleast one of
the fields being asked for is invalid (atime) and that results in
generating GETATTR to server and mtime/ctime also get updated and test
passes.
But newer /usr/bin/stat seems to have moved to using statx() syscall now
(instead of using lstat()). And statx() allows it to query only ctime or
mtime (and not rest of the basic stat fields). That means when querying
for mtime, fuse_update_get_attr() sees that mtime is not invalid (only
atime is invalid). So it does not generate a new GETATTR and fill stat
with cached mtime/ctime. And that means updated mtime is not seen by
xfstest and tests start failing.
Invalidating attrs after writeback completion should solve this problem in
a generic manner.
Signed-off-by: Vivek Goyal <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/file.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 7160d30068f3..8de9c24ac4ac 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1761,8 +1761,17 @@ static void fuse_writepage_end(struct fuse_mount *fm, struct fuse_args *args,
container_of(args, typeof(*wpa), ia.ap.args);
struct inode *inode = wpa->inode;
struct fuse_inode *fi = get_fuse_inode(inode);
+ struct fuse_conn *fc = get_fuse_conn(inode);
mapping_set_error(inode->i_mapping, error);
+ /*
+ * A writeback finished and this might have updated mtime/ctime on
+ * server making local mtime/ctime stale. Hence invalidate attrs.
+ * Do this only if writeback_cache is not enabled. If writeback_cache
+ * is enabled, we trust local ctime/mtime.
+ */
+ if (!fc->writeback_cache)
+ fuse_invalidate_attr(inode);
spin_lock(&fi->lock);
rb_erase(&wpa->writepages_entry, &fi->writepages);
while (wpa->next) {
--
2.30.2
From: Miklos Szeredi <[email protected]>
[ Upstream commit 0a7419c68a45d2d066b996be5087aa2d07ce80eb ]
get_user_ns() is done twice (once in virtio_fs_get_tree() and once in
fuse_conn_init()), resulting in a reference leak.
Also looks better to use fsc->user_ns (which *should* be the
current_user_ns() at this point).
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/virtio_fs.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c
index f0a7f1b7b75f..b9cfb1165ff4 100644
--- a/fs/fuse/virtio_fs.c
+++ b/fs/fuse/virtio_fs.c
@@ -1457,8 +1457,7 @@ static int virtio_fs_get_tree(struct fs_context *fsc)
return -ENOMEM;
}
- fuse_conn_init(fc, fm, get_user_ns(current_user_ns()),
- &virtio_fs_fiq_ops, fs);
+ fuse_conn_init(fc, fm, fsc->user_ns, &virtio_fs_fiq_ops, fs);
fc->release = fuse_free_conn;
fc->delete_stale = true;
fc->auto_submounts = true;
--
2.30.2
From: Miklos Szeredi <[email protected]>
[ Upstream commit 8217673d07256b22881127bf50dce874d0e51653 ]
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/cuse.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index 45082269e698..a37528b51798 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -627,6 +627,8 @@ static int __init cuse_init(void)
cuse_channel_fops.owner = THIS_MODULE;
cuse_channel_fops.open = cuse_channel_open;
cuse_channel_fops.release = cuse_channel_release;
+ /* CUSE is not prepared for FUSE_DEV_IOC_CLONE */
+ cuse_channel_fops.unlocked_ioctl = NULL;
cuse_class = class_create(THIS_MODULE, "cuse");
if (IS_ERR(cuse_class))
--
2.30.2
From: Vaibhav Jain <[email protected]>
[ Upstream commit a5d6a3e73acbd619dd5b7b831762b755f9e2db80 ]
While removing large number of mappings from hash page tables for
large memory systems as soft-lockup is reported because of the time
spent inside htap_remove_mapping() like one below:
watchdog: BUG: soft lockup - CPU#8 stuck for 23s!
<snip>
NIP plpar_hcall+0x38/0x58
LR pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
0x1fffffffffff000 (unreliable)
pSeries_lpar_hpte_removebolted+0x9c/0x230
hash__remove_section_mapping+0xec/0x1c0
remove_section_mapping+0x28/0x3c
arch_remove_memory+0xfc/0x150
devm_memremap_pages_release+0x180/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd4/0x270
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Fix this by adding a cond_resched() to the loop in
htap_remove_mapping() that issues hcall to remove hpte mapping. The
call to cond_resched() is issued every HZ jiffies which should prevent
the soft-lockup from being reported.
Suggested-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Vaibhav Jain <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/book3s64/hash_utils.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 24702c0a92e0..0141d571476c 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -336,7 +336,7 @@ repeat:
int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize)
{
- unsigned long vaddr;
+ unsigned long vaddr, time_limit;
unsigned int step, shift;
int rc;
int ret = 0;
@@ -349,8 +349,19 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
/* Unmap the full range specificied */
vaddr = ALIGN_DOWN(vstart, step);
+ time_limit = jiffies + HZ;
+
for (;vaddr < vend; vaddr += step) {
rc = mmu_hash_ops.hpte_removebolted(vaddr, psize, ssize);
+
+ /*
+ * For large number of mappings introduce a cond_resched()
+ * to prevent softlockup warnings.
+ */
+ if (time_after(jiffies, time_limit)) {
+ cond_resched();
+ time_limit = jiffies + HZ;
+ }
if (rc == -ENOENT) {
ret = -ENOENT;
continue;
--
2.30.2
From: Johannes Berg <[email protected]>
[ Upstream commit 48a5494d6a4cb5812f0640d9515f1876ffc7a013 ]
If we (for example) have a trans_cfg entry in the PCI IDs table,
but then don't find a full cfg entry for it in the info table,
we fall through to the code that treats the PCI ID table entry
as a full cfg entry. This obviously causes crashes later, e.g.
when trying to build the firmware name string.
Avoid such crashes by using the low bit of the pointer as a tag
for trans_cfg entries (automatically using a macro that checks
the type when assigning) and then checking that before trying to
use the data as a full entry - if it's just a partial entry at
that point, fail.
Since we're adding some macro magic, also check that the type is
in fact either struct iwl_cfg_trans_params or struct iwl_cfg,
failing compilation ("initializer element is not constant") if
it isn't.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 35 +++++++++++++++----
1 file changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 500fdb0b6c42..eeb70560b746 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -73,10 +73,20 @@
#include "iwl-prph.h"
#include "internal.h"
+#define TRANS_CFG_MARKER BIT(0)
+#define _IS_A(cfg, _struct) __builtin_types_compatible_p(typeof(cfg), \
+ struct _struct)
+extern int _invalid_type;
+#define _TRANS_CFG_MARKER(cfg) \
+ (__builtin_choose_expr(_IS_A(cfg, iwl_cfg_trans_params), \
+ TRANS_CFG_MARKER, \
+ __builtin_choose_expr(_IS_A(cfg, iwl_cfg), 0, _invalid_type)))
+#define _ASSIGN_CFG(cfg) (_TRANS_CFG_MARKER(cfg) + (kernel_ulong_t)&(cfg))
+
#define IWL_PCI_DEVICE(dev, subdev, cfg) \
.vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = (subdev), \
- .driver_data = (kernel_ulong_t)&(cfg)
+ .driver_data = _ASSIGN_CFG(cfg)
/* Hardware specific file defines the PCI IDs table for that hardware module */
static const struct pci_device_id iwl_hw_card_ids[] = {
@@ -1018,20 +1028,23 @@ static const struct iwl_dev_info iwl_dev_info_table[] = {
static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- const struct iwl_cfg_trans_params *trans =
- (struct iwl_cfg_trans_params *)(ent->driver_data);
+ const struct iwl_cfg_trans_params *trans;
const struct iwl_cfg *cfg_7265d __maybe_unused = NULL;
struct iwl_trans *iwl_trans;
struct iwl_trans_pcie *trans_pcie;
unsigned long flags;
int i, ret;
+ const struct iwl_cfg *cfg;
+
+ trans = (void *)(ent->driver_data & ~TRANS_CFG_MARKER);
+
/*
* This is needed for backwards compatibility with the old
* tables, so we don't need to change all the config structs
* at the same time. The cfg is used to compare with the old
* full cfg structs.
*/
- const struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
+ cfg = (void *)(ent->driver_data & ~TRANS_CFG_MARKER);
/* make sure trans is the first element in iwl_cfg */
BUILD_BUG_ON(offsetof(struct iwl_cfg, trans));
@@ -1133,11 +1146,19 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
#endif
/*
- * If we didn't set the cfg yet, assume the trans is actually
- * a full cfg from the old tables.
+ * If we didn't set the cfg yet, the PCI ID table entry should have
+ * been a full config - if yes, use it, otherwise fail.
*/
- if (!iwl_trans->cfg)
+ if (!iwl_trans->cfg) {
+ if (ent->driver_data & TRANS_CFG_MARKER) {
+ pr_err("No config found for PCI dev %04x/%04x, rev=0x%x, rfid=0x%x\n",
+ pdev->device, pdev->subsystem_device,
+ iwl_trans->hw_rev, iwl_trans->hw_rf_id);
+ ret = -EINVAL;
+ goto out_free_trans;
+ }
iwl_trans->cfg = cfg;
+ }
/* if we don't have a name yet, copy name from the old cfg */
if (!iwl_trans->name)
--
2.30.2
From: Kuninori Morimoto <[email protected]>
[ Upstream commit a122a116fc6d8fcf2f202dcd185173a54268f239 ]
Current rsnd needs to call .prepare (P) for clock settings,
.trigger for playback start (S) and stop (E).
It should be called as below from SSI point of view.
P -> S -> E -> P -> S -> E -> ...
But, if you used MIXer, below case might happen
(2)
1: P -> S ---> E -> ...
2: P ----> S -> ...
(1) (3)
P(1) setups clock, but E(2) resets it. and starts playback (3).
In such case, it will reports "SSI parent/child should use same rate".
rsnd_ssi_master_clk_start() which is the main function at (P)
was called from rsnd_ssi_init() (= S) before,
but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid
using clk_get_rate() which shouldn't be used under atomic context.
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic")
Because of above patch, rsnd_ssi_master_clk_start() is now called at (P)
which is for non atomic context. But (P) is assuming that spin lock is
*not* used.
One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx
which should be protected by spin lock.
After above patch, adg.c had below patch for other reasons.
commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate()
under atomic context")
clk_get_rate() is used at probe() timing by this patch.
In other words, rsnd_ssi_master_clk_start() is no longer using
clk_get_rate() any more.
This means we can call it from rsnd_ssi_init() (= S) again which is
protected by spin lock.
This patch re-move it to under spin lock, and solves
1. checking ssi->xxx without spin lock issue.
2. clk setting / device start / device stop race condition.
Reported-by: Linh Phung T. Y. <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index d0ded427a836..a2f8138d40c7 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -507,10 +507,15 @@ static int rsnd_ssi_init(struct rsnd_mod *mod,
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+ int ret;
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
+ ret = rsnd_ssi_master_clk_start(mod, io);
+ if (ret < 0)
+ return ret;
+
ssi->usrcnt++;
rsnd_mod_power_on(mod);
@@ -1060,13 +1065,6 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod,
return 0;
}
-static int rsnd_ssi_prepare(struct rsnd_mod *mod,
- struct rsnd_dai_stream *io,
- struct rsnd_priv *priv)
-{
- return rsnd_ssi_master_clk_start(mod, io);
-}
-
static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.name = SSI_NAME,
.probe = rsnd_ssi_common_probe,
@@ -1079,7 +1077,6 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.pointer = rsnd_ssi_pio_pointer,
.pcm_new = rsnd_ssi_pcm_new,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
@@ -1166,7 +1163,6 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = {
.pcm_new = rsnd_ssi_pcm_new,
.fallback = rsnd_ssi_fallback,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
--
2.30.2
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mlme.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ef19c3399b89..6d3220c66931 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1295,6 +1295,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
sdata->vif.csa_active = false;
ifmgd->csa_waiting_bcn = false;
+ /*
+ * If the CSA IE is still present on the beacon after the switch,
+ * we need to consider it as a new CSA (possibly to self).
+ */
+ ifmgd->beacon_crc_valid = false;
ret = drv_post_channel_switch(sdata);
if (ret) {
--
2.30.2
From: Paul Menzel <[email protected]>
[ Upstream commit 715601e4e36903a653cd4294dfd3ed0019101991 ]
This reverts commit 6778ff5b21bd8e78c8bd547fd66437cf2657fd9b.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexander Monakov <[email protected]>
Cc: David Coe <[email protected]>
Signed-off-by: Paul Menzel <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 45 ++++++++++------------------------------
1 file changed, 11 insertions(+), 34 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index fa502c0e2e31..8b1a037116b0 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -12,7 +12,6 @@
#include <linux/acpi.h>
#include <linux/list.h>
#include <linux/bitmap.h>
-#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
@@ -255,8 +254,6 @@ static enum iommu_init_state init_state = IOMMU_START_STATE;
static int amd_iommu_enable_interrupts(void);
static int __init iommu_go_to_state(enum iommu_init_state state);
static void init_device_table_dma(void);
-static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
- u8 fxn, u64 *value, bool is_write);
static bool amd_iommu_pre_enabled = true;
@@ -1720,11 +1717,13 @@ static int __init init_iommu_all(struct acpi_table_header *table)
return 0;
}
-static void __init init_iommu_perf_ctr(struct amd_iommu *iommu)
+static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
+ u8 fxn, u64 *value, bool is_write);
+
+static void init_iommu_perf_ctr(struct amd_iommu *iommu)
{
- int retry;
struct pci_dev *pdev = iommu->dev;
- u64 val = 0xabcd, val2 = 0, save_reg, save_src;
+ u64 val = 0xabcd, val2 = 0, save_reg = 0;
if (!iommu_feature(iommu, FEATURE_PC))
return;
@@ -1732,39 +1731,17 @@ static void __init init_iommu_perf_ctr(struct amd_iommu *iommu)
amd_iommu_pc_present = true;
/* save the value to restore, if writable */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, false))
- goto pc_false;
-
- /*
- * Disable power gating by programing the performance counter
- * source to 20 (i.e. counts the reads and writes from/to IOMMU
- * Reserved Register [MMIO Offset 1FF8h] that are ignored.),
- * which never get incremented during this init phase.
- * (Note: The event is also deprecated.)
- */
- val = 20;
- if (iommu_pc_get_set_reg(iommu, 0, 0, 8, &val, true))
+ if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false))
goto pc_false;
/* Check if the performance counters can be written to */
- val = 0xabcd;
- for (retry = 5; retry; retry--) {
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false) ||
- val2)
- break;
-
- /* Wait about 20 msec for power gating to disable and retry. */
- msleep(20);
- }
-
- /* restore */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, true))
+ if ((iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true)) ||
+ (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false)) ||
+ (val != val2))
goto pc_false;
- if (val != val2)
+ /* restore */
+ if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true))
goto pc_false;
pci_info(pdev, "IOMMU performance counters supported\n");
--
2.30.2
From: Suravee Suthikulpanit <[email protected]>
[ Upstream commit 994d6608efe4a4c8834bdc5014c86f4bc6aceea6 ]
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9cca ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexander Monakov <[email protected]>
Cc: David Coe <[email protected]>
Cc: Paul Menzel <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Tested-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 8b1a037116b0..cc9869cc48e4 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -1717,33 +1717,16 @@ static int __init init_iommu_all(struct acpi_table_header *table)
return 0;
}
-static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
- u8 fxn, u64 *value, bool is_write);
-
static void init_iommu_perf_ctr(struct amd_iommu *iommu)
{
+ u64 val;
struct pci_dev *pdev = iommu->dev;
- u64 val = 0xabcd, val2 = 0, save_reg = 0;
if (!iommu_feature(iommu, FEATURE_PC))
return;
amd_iommu_pc_present = true;
- /* save the value to restore, if writable */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false))
- goto pc_false;
-
- /* Check if the performance counters can be written to */
- if ((iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true)) ||
- (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false)) ||
- (val != val2))
- goto pc_false;
-
- /* restore */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true))
- goto pc_false;
-
pci_info(pdev, "IOMMU performance counters supported\n");
val = readl(iommu->mmio_base + MMIO_CNTR_CONF_OFFSET);
@@ -1751,11 +1734,6 @@ static void init_iommu_perf_ctr(struct amd_iommu *iommu)
iommu->max_counters = (u8) ((val >> 7) & 0xf);
return;
-
-pc_false:
- pci_err(pdev, "Unable to read/write to IOMMU perf counter.\n");
- amd_iommu_pc_present = false;
- return;
}
static ssize_t amd_iommu_show_cap(struct device *dev,
--
2.30.2
From: Anthony Wang <[email protected]>
[ Upstream commit 56d63782af9bbd1271bff1422a6a013123eade4d ]
[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.
[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.
Signed-off-by: Anthony Wang <[email protected]>
Acked-by: Bindu Ramamurthy <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 921c4ca6e902..284ed1c8a35a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2504,6 +2504,10 @@ static void commit_planes_for_stream(struct dc *dc,
plane_state->triplebuffer_flips = true;
}
}
+ if (update_type == UPDATE_TYPE_FULL) {
+ /* force vsync flip when reconfiguring pipes to prevent underflow */
+ plane_state->flip_immediate = false;
+ }
}
}
--
2.30.2
From: Yonghong Song <[email protected]>
[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lib.mk | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index be17462fe146..0af84ad48aa7 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -1,6 +1,10 @@
# This mimics the top-level Makefile. We do it explicitly here so that this
# Makefile can operate with or without the kbuild infrastructure.
+ifneq ($(LLVM),)
+CC := clang
+else
CC := $(CROSS_COMPILE)gcc
+endif
ifeq (0,$(MAKELEVEL))
ifeq ($(OUTPUT),)
--
2.30.2
From: Mihai Moldovan <[email protected]>
[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kconfig/nconf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index e0f965529166..af814b39b876 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -504,8 +504,8 @@ static int get_mext_match(const char *match_str, match_f flag)
else if (flag == FIND_NEXT_MATCH_UP)
--match_start;
+ match_start = (match_start + items_num) % items_num;
index = match_start;
- index = (index + items_num) % items_num;
while (true) {
char *str = k_menu_items[index].str;
if (strcasestr(str, match_str) != NULL)
--
2.30.2
From: Vamshi Krishna Gopal <[email protected]>
[ Upstream commit d25bbe80485f8bcbbeb91a2a6cd8798c124b27b7 ]
Add quirks for jack detection, rt711 DAI and DMIC
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Vamshi Krishna Gopal <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/sof_sdw.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 1d7677376e74..9dc982c2c776 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -187,6 +187,17 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
SOF_RT715_DAI_ID_FIX |
SOF_SDW_FOUR_SPK),
},
+ /* AlderLake devices */
+ {
+ .callback = sof_sdw_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Alder Lake Client Platform"),
+ },
+ .driver_data = (void *)(SOF_RT711_JD_SRC_JD1 |
+ SOF_SDW_TGL_HDMI |
+ SOF_SDW_PCH_DMIC),
+ },
{}
};
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit fa0c10a5f3a49130dd11281aa27e7e1c8654abc7 ]
The Special Function Registers on all Exynos SoC, including ARM64, are
32-bit wide, so entire driver uses matching functions like readl() or
writel(). On 64-bit ARM using unsigned long for register masks:
1. makes little sense as immediately after bitwise operation it will be
cast to 32-bit value when calling writel(),
2. is actually error-prone because it might promote other operands to
64-bit.
Addresses-Coverity: Unintentional integer overflow
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Sylwester Nawrocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index b9ea09fabf84..493079a47d05 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -55,7 +55,7 @@ static void exynos_irq_mask(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
- unsigned long mask;
+ unsigned int mask;
unsigned long flags;
spin_lock_irqsave(&bank->slock, flags);
@@ -83,7 +83,7 @@ static void exynos_irq_unmask(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
- unsigned long mask;
+ unsigned int mask;
unsigned long flags;
/*
@@ -483,7 +483,7 @@ static void exynos_irq_eint0_15(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static inline void exynos_irq_demux_eint(unsigned long pend,
+static inline void exynos_irq_demux_eint(unsigned int pend,
struct irq_domain *domain)
{
unsigned int irq;
@@ -500,8 +500,8 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc);
- unsigned long pend;
- unsigned long mask;
+ unsigned int pend;
+ unsigned int mask;
int i;
chained_irq_enter(chip, desc);
--
2.30.2
From: Kai Vehmanen <[email protected]>
[ Upstream commit 0c37e2eb6b83e375e8a654d01598292d5591fc65 ]
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:
1. system in S3 suspend
2. DP/HDMI receiver connected
3. system resumed
4. HDA controller resumed, but card->deferred_resume_work not complete
5. acomp eld_notify callback
6. eld_notify ignored as power state is not CTL_POWER_D0
7. HDA resume deferred work completed, power state set to CTL_POWER_D0
This results in losing the notification, and the jack state reported to
user-space is not correct.
The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.
Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.
BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 8c6f10cbced3..6d2a4dfcfe43 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2653,7 +2653,7 @@ static void generic_acomp_pin_eld_notify(void *audio_ptr, int port, int dev_id)
/* skip notification during system suspend (but not in runtime PM);
* the state will be updated at resume
*/
- if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0)
+ if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
if (snd_hdac_is_in_pm(&codec->core))
@@ -2839,7 +2839,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
/* skip notification during system suspend (but not in runtime PM);
* the state will be updated at resume
*/
- if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0)
+ if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
if (snd_hdac_is_in_pm(&codec->core))
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_make_chunk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 9a56ae2f3651..b9d6babe2870 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3126,7 +3126,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
* primary.
*/
if (af->is_any(&addr))
- memcpy(&addr.v4, sctp_source(asconf), sizeof(addr));
+ memcpy(&addr, sctp_source(asconf), sizeof(addr));
if (security_sctp_bind_connect(asoc->ep->base.sk,
SCTP_PARAM_SET_PRIMARY,
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 1e3d976dbb23b3fce544752b434bdc32ce64aabc ]
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/flow_dissector.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index d48b37b15b27..c52e5ea654e9 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -822,8 +822,10 @@ static void __skb_flow_bpf_to_target(const struct bpf_flow_keys *flow_keys,
key_addrs = skb_flow_dissector_target(flow_dissector,
FLOW_DISSECTOR_KEY_IPV6_ADDRS,
target_container);
- memcpy(&key_addrs->v6addrs, &flow_keys->ipv6_src,
- sizeof(key_addrs->v6addrs));
+ memcpy(&key_addrs->v6addrs.src, &flow_keys->ipv6_src,
+ sizeof(key_addrs->v6addrs.src));
+ memcpy(&key_addrs->v6addrs.dst, &flow_keys->ipv6_dst,
+ sizeof(key_addrs->v6addrs.dst));
key_control->addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
}
--
2.30.2
From: Srikar Dronamraju <[email protected]>
[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ]
Geethika reported a trace when doing a dlpar CPU add.
------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420
REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020
CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16: c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70
[c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670
[c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520
[c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0
[c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0
---[ end trace 532d9066d3d4d7ec ]---
Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Srikar Dronamraju <[email protected]>
Reviewed-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index dd34ea674496..db7ac77bea3a 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1442,6 +1442,9 @@ void start_secondary(void *unused)
vdso_getcpu_init();
#endif
+ set_numa_node(numa_cpu_lookup_table[cpu]);
+ set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
/* Update topology CPU masks */
add_cpu_to_masks(cpu);
@@ -1460,9 +1463,6 @@ void start_secondary(void *unused)
shared_caches = true;
}
- set_numa_node(numa_cpu_lookup_table[cpu]);
- set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
-
smp_wmb();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
--
2.30.2
From: Po-Hao Huang <[email protected]>
[ Upstream commit 7ae7784ec2a812c07d2ca91a6538ef2470154fb6 ]
Fix power tracking issue by replacing unnecessary IQ calibration
with LC calibration.
When thermal difference exceeds limitation, let RF circuit adjsut
its characteristic to fit in current environment.
Signed-off-by: Po-Hao Huang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/main.h | 2 ++
drivers/net/wireless/realtek/rtw88/phy.c | 14 ++++++++++
drivers/net/wireless/realtek/rtw88/phy.h | 1 +
drivers/net/wireless/realtek/rtw88/reg.h | 5 ++++
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 27 +++++++++++++++++--
5 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index ffb02e614217..8ba0b0824ae9 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -1156,6 +1156,7 @@ struct rtw_chip_info {
bool en_dis_dpd;
u16 dpd_ratemask;
u8 iqk_threshold;
+ u8 lck_threshold;
const struct rtw_pwr_track_tbl *pwr_track_tbl;
u8 bfer_su_max_num;
@@ -1485,6 +1486,7 @@ struct rtw_dm_info {
u8 tx_rate;
u8 thermal_avg[RTW_RF_PATH_MAX];
u8 thermal_meter_k;
+ u8 thermal_meter_lck;
s8 delta_power_index[RTW_RF_PATH_MAX];
s8 delta_power_index_last[RTW_RF_PATH_MAX];
u8 default_ofdm_index;
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index 36e2f0dba00c..af8b703d11d4 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -2154,6 +2154,20 @@ s8 rtw_phy_pwrtrack_get_pwridx(struct rtw_dev *rtwdev,
}
EXPORT_SYMBOL(rtw_phy_pwrtrack_get_pwridx);
+bool rtw_phy_pwrtrack_need_lck(struct rtw_dev *rtwdev)
+{
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+ u8 delta_lck;
+
+ delta_lck = abs(dm_info->thermal_avg[0] - dm_info->thermal_meter_lck);
+ if (delta_lck >= rtwdev->chip->lck_threshold) {
+ dm_info->thermal_meter_lck = dm_info->thermal_avg[0];
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(rtw_phy_pwrtrack_need_lck);
+
bool rtw_phy_pwrtrack_need_iqk(struct rtw_dev *rtwdev)
{
struct rtw_dm_info *dm_info = &rtwdev->dm_info;
diff --git a/drivers/net/wireless/realtek/rtw88/phy.h b/drivers/net/wireless/realtek/rtw88/phy.h
index b924ed07630a..9623248c9466 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.h
+++ b/drivers/net/wireless/realtek/rtw88/phy.h
@@ -55,6 +55,7 @@ u8 rtw_phy_pwrtrack_get_delta(struct rtw_dev *rtwdev, u8 path);
s8 rtw_phy_pwrtrack_get_pwridx(struct rtw_dev *rtwdev,
struct rtw_swing_table *swing_table,
u8 tbl_path, u8 therm_path, u8 delta);
+bool rtw_phy_pwrtrack_need_lck(struct rtw_dev *rtwdev);
bool rtw_phy_pwrtrack_need_iqk(struct rtw_dev *rtwdev);
void rtw_phy_config_swing_table(struct rtw_dev *rtwdev,
struct rtw_swing_table *swing_table);
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 86b94c008a27..aca3dbdc2d5a 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -639,8 +639,13 @@
#define RF_TXATANK 0x64
#define RF_TRXIQ 0x66
#define RF_RXIQGEN 0x8d
+#define RF_SYN_PFD 0xb0
#define RF_XTALX2 0xb8
+#define RF_SYN_CTRL 0xbb
#define RF_MALSEL 0xbe
+#define RF_SYN_AAC 0xc9
+#define RF_AAC_CTRL 0xca
+#define RF_FAST_LCK 0xcc
#define RF_RCKD 0xde
#define RF_TXADBG 0xde
#define RF_LUTDBG 0xdf
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index e37300e98517..b718f5d810be 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1124,6 +1124,7 @@ static void rtw8822c_pwrtrack_init(struct rtw_dev *rtwdev)
dm_info->pwr_trk_triggered = false;
dm_info->thermal_meter_k = rtwdev->efuse.thermal_meter_k;
+ dm_info->thermal_meter_lck = rtwdev->efuse.thermal_meter_k;
}
static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
@@ -2106,6 +2107,26 @@ static void rtw8822c_false_alarm_statistics(struct rtw_dev *rtwdev)
rtw_write32_set(rtwdev, REG_RX_BREAK, BIT_COM_RX_GCK_EN);
}
+static void rtw8822c_do_lck(struct rtw_dev *rtwdev)
+{
+ u32 val;
+
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_CTRL, RFREG_MASK, 0x80010);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_PFD, RFREG_MASK, 0x1F0FA);
+ fsleep(1);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_AAC_CTRL, RFREG_MASK, 0x80000);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_AAC, RFREG_MASK, 0x80001);
+ read_poll_timeout(rtw_read_rf, val, val != 0x1, 1000, 100000,
+ true, rtwdev, RF_PATH_A, RF_AAC_CTRL, 0x1000);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_PFD, RFREG_MASK, 0x1F0F8);
+ rtw_write_rf(rtwdev, RF_PATH_B, RF_SYN_CTRL, RFREG_MASK, 0x80010);
+
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x0f000);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x4f000);
+ fsleep(1);
+ rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x0f000);
+}
+
static void rtw8822c_do_iqk(struct rtw_dev *rtwdev)
{
struct rtw_iqk_para para = {0};
@@ -3519,11 +3540,12 @@ static void __rtw8822c_pwr_track(struct rtw_dev *rtwdev)
rtw_phy_config_swing_table(rtwdev, &swing_table);
+ if (rtw_phy_pwrtrack_need_lck(rtwdev))
+ rtw8822c_do_lck(rtwdev);
+
for (i = 0; i < rtwdev->hal.rf_path_num; i++)
rtw8822c_pwr_track_path(rtwdev, &swing_table, i);
- if (rtw_phy_pwrtrack_need_iqk(rtwdev))
- rtw8822c_do_iqk(rtwdev);
}
static void rtw8822c_pwr_track(struct rtw_dev *rtwdev)
@@ -4328,6 +4350,7 @@ struct rtw_chip_info rtw8822c_hw_spec = {
.dpd_ratemask = DIS_DPD_RATEALL,
.pwr_track_tbl = &rtw8822c_rtw_pwr_track_tbl,
.iqk_threshold = 8,
+ .lck_threshold = 8,
.bfer_su_max_num = 2,
.bfer_mu_max_num = 1,
.rx_ldpc = true,
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit 26928ca1f06aab4361eb5adbe7ef3b5c82f13cf2 ]
Lenovo Ideapad S740 requires quite a few COEF setups to make its
speakers working. The verb table was provided from Ryan Prescott as
the result of investigation via qemu:
https://github.com/ryanprescott/realtek-verb-tools/wiki/How-to-sniff-verbs-from-a-Windows-sound-driver
BugLink: https://github.com/thesofproject/linux/issues/2748
Tested-by: Ryan Prescott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/ideapad_s740_helper.c | 492 ++++++++++++++++++++++++++++
sound/pci/hda/patch_realtek.c | 11 +
2 files changed, 503 insertions(+)
create mode 100644 sound/pci/hda/ideapad_s740_helper.c
diff --git a/sound/pci/hda/ideapad_s740_helper.c b/sound/pci/hda/ideapad_s740_helper.c
new file mode 100644
index 000000000000..564b9086e52d
--- /dev/null
+++ b/sound/pci/hda/ideapad_s740_helper.c
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Fixes for Lenovo Ideapad S740, to be included from codec driver */
+
+static const struct hda_verb alc285_ideapad_s740_coefs[] = {
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x10 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0320 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0041 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0041 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001d },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004e },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001d },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004e },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0042 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x007f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x003c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0011 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x002a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x002a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0046 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x000f },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0046 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0044 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0044 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0003 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0009 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x004c },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001b },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0019 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0025 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0018 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0037 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x001a },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0040 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0016 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0076 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0017 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0010 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0015 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0007 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0086 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0001 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x29 },
+{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0002 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0x0000 },
+{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+{}
+};
+
+static void alc285_fixup_ideapad_s740_coef(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_add_verbs(codec, alc285_ideapad_s740_coefs);
+ break;
+ }
+}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8ec57bd351df..1fe70f2fe4fe 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6282,6 +6282,9 @@ static void alc_fixup_thinkpad_acpi(struct hda_codec *codec,
/* for alc295_fixup_hp_top_speakers */
#include "hp_x360_helper.c"
+/* for alc285_fixup_ideapad_s740_coef() */
+#include "ideapad_s740_helper.c"
+
enum {
ALC269_FIXUP_GPIO2,
ALC269_FIXUP_SONY_VAIO,
@@ -6481,6 +6484,7 @@ enum {
ALC282_FIXUP_ACER_DISABLE_LINEOUT,
ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST,
ALC256_FIXUP_ACER_HEADSET_MIC,
+ ALC285_FIXUP_IDEAPAD_S740_COEF,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -7973,6 +7977,12 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
},
+ [ALC285_FIXUP_IDEAPAD_S740_COEF] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc285_fixup_ideapad_s740_coef,
+ .chained = true,
+ .chain_id = ALC269_FIXUP_THINKPAD_ACPI,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8320,6 +8330,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME),
+ SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF),
SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
--
2.30.2
From: Du Cheng <[email protected]>
[ Upstream commit ed8157f1ebf1ae81a8fa2653e3f20d2076fad1c9 ]
There is a reproducible sequence from the userland that will trigger a WARN_ON()
condition in taprio_get_start_time, which causes kernel to panic if configured
as "panic_on_warn". Catch this condition in parse_taprio_schedule to
prevent this condition.
Reported as bug on syzkaller:
https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c
Reported-by: [email protected]
Signed-off-by: Du Cheng <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_taprio.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index c966c05a0be9..00853065dfa0 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -900,6 +900,12 @@ static int parse_taprio_schedule(struct taprio_sched *q, struct nlattr **tb,
list_for_each_entry(entry, &new->entries, list)
cycle = ktime_add_ns(cycle, entry->interval);
+
+ if (!cycle) {
+ NL_SET_ERR_MSG(extack, "'cycle_time' can never be 0");
+ return -EINVAL;
+ }
+
new->cycle_time = cycle;
}
--
2.30.2
From: Michael Ellerman <[email protected]>
[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 12cbffd3c2e3..325f3b220f36 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -47,9 +47,6 @@ static void rtas_stop_self(void)
BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
- printk("cpu %u (hwid %u) Ready to die...\n",
- smp_processor_id(), hard_smp_processor_id());
-
rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
panic("Alas, I survived.\n");
--
2.30.2
From: Yaqi Chen <[email protected]>
[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]
>From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.
This commit fixes by using bpf_probe_read_kernel.
Signed-off-by: Yaqi Chen <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/tracex1_kern.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/samples/bpf/tracex1_kern.c b/samples/bpf/tracex1_kern.c
index 3f4599c9a202..ef30d2b353b0 100644
--- a/samples/bpf/tracex1_kern.c
+++ b/samples/bpf/tracex1_kern.c
@@ -26,7 +26,7 @@
SEC("kprobe/__netif_receive_skb_core")
int bpf_prog1(struct pt_regs *ctx)
{
- /* attaches to kprobe netif_receive_skb,
+ /* attaches to kprobe __netif_receive_skb_core,
* looks for packets on loobpack device and prints them
*/
char devname[IFNAMSIZ];
@@ -35,7 +35,7 @@ int bpf_prog1(struct pt_regs *ctx)
int len;
/* non-portable! works for the given kernel only */
- skb = (struct sk_buff *) PT_REGS_PARM1(ctx);
+ bpf_probe_read_kernel(&skb, sizeof(skb), (void *)PT_REGS_PARM1(ctx));
dev = _(skb->dev);
len = _(skb->len);
--
2.30.2
From: Robin Singh <[email protected]>
[ Upstream commit 19cc1f3829567e7dca21c1389ea6407b8f5efab4 ]
[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.
[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.
kernel panic log:
[ 128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI
[ 128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G W 5.4.19-android-x86_64 #1
[ 128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020
[ 128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu]
[ 128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ......
[ 128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246
......
[ 128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0
[ 128.865695] Call Trace:
[ 128.869712] hubp3_setup+0x1f/0x7f [amdgpu]
[ 128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu]
[ 128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu]
[ 128.885706] dc_commit_state+0x3d2/0x658 [amdgpu]
[ 128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu]
[ 128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.905706] ? __is_insn_slot_addr+0x43/0x48
[ 128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu]
[ 128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu]
[ 128.921700] ? usleep_range+0x7c/0x7c
[ 128.925705] ? preempt_count_sub+0xf/0x18
[ 128.929706] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.933732] ? __wait_for_common+0x11e/0x18f
[ 128.937705] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.941706] ? __wait_for_common+0x11e/0x18f
[ 128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper]
[ 128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper]
[ 128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu]
[ 128.961705] ? drm_atomic_check_only+0x543/0x68d [drm]
[ 128.969705] ? drm_atomic_set_property+0x760/0x7af [drm]
[ 128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 128.989706] drm_ioctl_kernel+0x82/0xda [drm]
[ 128.993706] drm_ioctl+0x225/0x319 [drm]
[ 128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 129.001706] ? preempt_count_sub+0xf/0x18
[ 129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu]
[ 129.009705] vfs_ioctl+0x1d/0x2a
[ 129.013705] do_vfs_ioctl+0x419/0x43d
[ 129.017707] ksys_ioctl+0x52/0x71
[ 129.021707] __x64_sys_ioctl+0x16/0x19
[ 129.025706] do_syscall_64+0x78/0x85
[ 129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Robin Singh <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Robin Singh <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
index 368818d2dfc6..cd9bd71da4b7 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2012-17 Advanced Micro Devices, Inc.
+ * Copyright 2012-2021 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -181,11 +181,14 @@ void hubp2_vready_at_or_After_vsync(struct hubp *hubp,
else
Set HUBP_VREADY_AT_OR_AFTER_VSYNC = 0
*/
- if ((pipe_dest->vstartup_start - (pipe_dest->vready_offset+pipe_dest->vupdate_width
- + pipe_dest->vupdate_offset) / pipe_dest->htotal) <= pipe_dest->vblank_end) {
- value = 1;
- } else
- value = 0;
+ if (pipe_dest->htotal != 0) {
+ if ((pipe_dest->vstartup_start - (pipe_dest->vready_offset+pipe_dest->vupdate_width
+ + pipe_dest->vupdate_offset) / pipe_dest->htotal) <= pipe_dest->vblank_end) {
+ value = 1;
+ } else
+ value = 0;
+ }
+
REG_UPDATE(DCHUBP_CNTL, HUBP_VREADY_AT_OR_AFTER_VSYNC, value);
}
--
2.30.2
From: Dingchen (David) Zhang <[email protected]>
[ Upstream commit 4ccf9446b2a3615615045346c97f8a1e2a16568a ]
[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.
[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.
Signed-off-by: Dingchen (David) Zhang <[email protected]>
Reviewed-by: Bhawanpreet Lakha <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
index 3a367a5968ae..972f2600f967 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp_psp.c
@@ -789,6 +789,8 @@ enum mod_hdcp_status mod_hdcp_hdcp2_validate_rx_id_list(struct mod_hdcp *hdcp)
TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED) {
hdcp->connection.is_hdcp2_revoked = 1;
status = MOD_HDCP_STATUS_HDCP2_RX_ID_LIST_REVOKED;
+ } else {
+ status = MOD_HDCP_STATUS_HDCP2_VALIDATE_RX_ID_LIST_FAILURE;
}
}
mutex_unlock(&psp->hdcp_context.mutex);
--
2.30.2
From: Jinzhou Su <[email protected]>
[ Upstream commit 5c88e3b86a88f14efa0a3ddd28641c6ff49fb9c4 ]
The buffer of SA bo will be used by many cases. So it's better
to invalidate the cache of indirect buffer allocated by SA before
commit the IB.
Signed-off-by: Jinzhou Su <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index 2f53fa0ae9a6..28f20f0b722f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -75,6 +75,8 @@ int amdgpu_ib_get(struct amdgpu_device *adev, struct amdgpu_vm *vm,
}
ib->ptr = amdgpu_sa_bo_cpu_addr(ib->sa_bo);
+ /* flush the cache before commit the IB */
+ ib->flags = AMDGPU_IB_FLAG_EMIT_MEM_SYNC;
if (!vm)
ib->gpu_addr = amdgpu_sa_bo_gpu_addr(ib->sa_bo);
--
2.30.2
From: Felix Fietkau <[email protected]>
[ Upstream commit 5c7d374444afdeb9dd534a37c4f6c13af032da0c ]
Fixes hardware wakeup issues
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index c31036f57aef..62a971660da7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -341,12 +341,20 @@ static int mt7615_mcu_drv_pmctrl(struct mt7615_dev *dev)
u32 addr;
int err;
- addr = is_mt7663(mdev) ? MT_PCIE_DOORBELL_PUSH : MT_CFG_LPCR_HOST;
+ if (is_mt7663(mdev)) {
+ /* Clear firmware own via N9 eint */
+ mt76_wr(dev, MT_PCIE_DOORBELL_PUSH, MT_CFG_LPCR_HOST_DRV_OWN);
+ mt76_poll(dev, MT_CONN_ON_MISC, MT_CFG_LPCR_HOST_FW_OWN, 0, 3000);
+
+ addr = MT_CONN_HIF_ON_LPCTL;
+ } else {
+ addr = MT_CFG_LPCR_HOST;
+ }
+
mt76_wr(dev, addr, MT_CFG_LPCR_HOST_DRV_OWN);
mt7622_trigger_hif_int(dev, true);
- addr = is_mt7663(mdev) ? MT_CONN_HIF_ON_LPCTL : MT_CFG_LPCR_HOST;
err = !mt76_poll_msec(dev, addr, MT_CFG_LPCR_HOST_FW_OWN, 0, 3000);
mt7622_trigger_hif_int(dev, false);
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]
Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 pri; /* 8 1 */
u8 service_class; /* 9 1 */
struct {
u8 daddr[6]; /* 10 6 */
u8 saddr[6]; /* 16 6 */
} addr; /* 10 12 */
/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};
$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 reception; /* 8 1 */
u8 pri; /* 9 1 */
u8 service_class; /* 10 1 */
struct {
u8 daddr[6]; /* 11 6 */
u8 saddr[6]; /* 17 6 */
} addr; /* 11 12 */
/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};
The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 12 ++++++++----
drivers/net/wireless/wl3501_cs.c | 10 ++++++----
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index b446cb369557..31ebef3e7ed4 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -471,8 +471,10 @@ struct wl3501_md_req {
u16 size;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_ind {
@@ -484,8 +486,10 @@ struct wl3501_md_ind {
u8 reception;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_confirm {
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 026e88b80bfc..c3c859c4b2c7 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -471,6 +471,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
struct wl3501_md_req sig = {
.sig_id = WL3501_SIG_MD_REQ,
};
+ size_t sig_addr_len = sizeof(sig.addr);
u8 *pdata = (char *)data;
int rc = -EIO;
@@ -486,9 +487,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
goto out;
}
rc = 0;
- memcpy(&sig.daddr[0], pdata, 12);
- pktlen = len - 12;
- pdata += 12;
+ memcpy(&sig.addr, pdata, sig_addr_len);
+ pktlen = len - sig_addr_len;
+ pdata += sig_addr_len;
sig.data = bf;
if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
u8 addr4[ETH_ALEN] = {
@@ -982,7 +983,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
} else {
skb->dev = dev;
skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
- skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
+ skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr,
+ sizeof(sig.addr));
wl3501_receive(this, skb->data, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, dev);
--
2.30.2
From: Stefan Assmann <[email protected]>
[ Upstream commit 1a0e880b028f97478dc689e2900b312741d0d772 ]
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have
already been called in the very same function.
Remove the duplicate calls.
Signed-off-by: Stefan Assmann <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index dc5b3c06d1e0..ebd08543791b 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3899,8 +3899,6 @@ static void iavf_remove(struct pci_dev *pdev)
iounmap(hw->hw_addr);
pci_release_regions(pdev);
- iavf_free_all_tx_resources(adapter);
- iavf_free_all_rx_resources(adapter);
iavf_free_queues(adapter);
kfree(adapter->vf_res);
spin_lock_bh(&adapter->mac_vlan_list_lock);
--
2.30.2
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.
===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(p->lock)/1);
lock(&(p->lock)/1);
===
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 5b69a6a72a0e..6806eefa52ce 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1050,7 +1050,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
iommu_table_release_pages(tbl);
@@ -1078,7 +1078,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
memset(tbl->it_map, 0, sz);
--
2.30.2
From: Lee Gibson <[email protected]>
[ Upstream commit 130f634da1af649205f4a3dd86cbe5c126b57914 ]
Function qtnf_event_handle_external_auth calls memcpy without
checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/quantenna/qtnfmac/event.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/event.c b/drivers/net/wireless/quantenna/qtnfmac/event.c
index c775c177933b..8dc80574d08d 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/event.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/event.c
@@ -570,8 +570,10 @@ qtnf_event_handle_external_auth(struct qtnf_vif *vif,
return 0;
if (ev->ssid_len) {
- memcpy(auth.ssid.ssid, ev->ssid, ev->ssid_len);
- auth.ssid.ssid_len = ev->ssid_len;
+ int len = clamp_val(ev->ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+ memcpy(auth.ssid.ssid, ev->ssid, len);
+ auth.ssid.ssid_len = len;
}
auth.key_mgmt_suite = le32_to_cpu(ev->akm_suite);
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]
Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
u16 beacon_period; /* 0 2 */
u16 dtim_period; /* 2 2 */
u16 cap_info; /* 4 2 */
u8 bss_type; /* 6 1 */
u8 bssid[6]; /* 7 6 */
struct iw_mgmt_essid_pset ssid; /* 13 34 */
struct iw_mgmt_ds_pset ds_pset; /* 47 3 */
struct iw_mgmt_cf_pset cf_pset; /* 50 8 */
struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */
struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */
/* size: 72, cachelines: 2, members: 10 */
/* last cacheline: 8 bytes */
};
$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
struct iw_mgmt_data_rset operational_rset; /* 4 10 */
u16 reserved2; /* 14 2 */
u16 timeout; /* 16 2 */
u16 probe_delay; /* 18 2 */
u8 timestamp[8]; /* 20 8 */
u8 local_time[8]; /* 28 8 */
struct wl3501_req req; /* 36 72 */
/* size: 108, cachelines: 2, members: 10 */
/* last cacheline: 44 bytes */
};
$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
u16 status; /* 4 2 */
char timestamp[8]; /* 6 8 */
char localtime[8]; /* 14 8 */
struct wl3501_req req; /* 22 72 */
/* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
u8 rssi; /* 94 1 */
/* size: 96, cachelines: 2, members: 8 */
/* padding: 1 */
/* last cacheline: 32 bytes */
};
The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 35 +++++++++++--------------
drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++---------------
2 files changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 31ebef3e7ed4..87195c1dadf2 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -379,16 +379,7 @@ struct wl3501_get_confirm {
u8 mib_value[100];
};
-struct wl3501_join_req {
- u16 next_blk;
- u8 sig_id;
- u8 reserved;
- struct iw_mgmt_data_rset operational_rset;
- u16 reserved2;
- u16 timeout;
- u16 probe_delay;
- u8 timestamp[8];
- u8 local_time[8];
+struct wl3501_req {
u16 beacon_period;
u16 dtim_period;
u16 cap_info;
@@ -401,6 +392,19 @@ struct wl3501_join_req {
struct iw_mgmt_data_rset bss_basic_rset;
};
+struct wl3501_join_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ struct iw_mgmt_data_rset operational_rset;
+ u16 reserved2;
+ u16 timeout;
+ u16 probe_delay;
+ u8 timestamp[8];
+ u8 local_time[8];
+ struct wl3501_req req;
+};
+
struct wl3501_join_confirm {
u16 next_blk;
u8 sig_id;
@@ -443,16 +447,7 @@ struct wl3501_scan_confirm {
u16 status;
char timestamp[8];
char localtime[8];
- u16 beacon_period;
- u16 dtim_period;
- u16 cap_info;
- u8 bss_type;
- u8 bssid[ETH_ALEN];
- struct iw_mgmt_essid_pset ssid;
- struct iw_mgmt_ds_pset ds_pset;
- struct iw_mgmt_cf_pset cf_pset;
- struct iw_mgmt_ibss_pset ibss_pset;
- struct iw_mgmt_data_rset bss_basic_rset;
+ struct wl3501_req req;
u8 rssi;
};
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index c3c859c4b2c7..ff1701adbb17 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -592,7 +592,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
struct wl3501_join_req sig = {
.sig_id = WL3501_SIG_JOIN_REQ,
.timeout = 10,
- .ds_pset = {
+ .req.ds_pset = {
.el = {
.id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
.len = 1,
@@ -601,7 +601,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
},
};
- memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+ memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req));
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -669,35 +669,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
if (sig.status == WL3501_STATUS_SUCCESS) {
pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
this->net_type == IW_MODE_AUTO) {
if (!this->essid.el.len)
matchflag = 1;
else if (this->essid.el.len == 3 &&
!memcmp(this->essid.essid, "ANY", 3))
matchflag = 1;
- else if (this->essid.el.len != sig.ssid.el.len)
+ else if (this->essid.el.len != sig.req.ssid.el.len)
matchflag = 0;
- else if (memcmp(this->essid.essid, sig.ssid.essid,
+ else if (memcmp(this->essid.essid, sig.req.ssid.essid,
this->essid.el.len))
matchflag = 0;
else
matchflag = 1;
if (matchflag) {
for (i = 0; i < this->bss_cnt; i++) {
- if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) {
+ if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid,
+ sig.req.bssid)) {
matchflag = 0;
break;
}
}
}
if (matchflag && (i < 20)) {
- memcpy(&this->bss_set[i].beacon_period,
- &sig.beacon_period, 73);
+ memcpy(&this->bss_set[i].req,
+ &sig.req, sizeof(sig.req));
this->bss_cnt++;
this->rssi = sig.rssi;
+ this->bss_set[i].rssi = sig.rssi;
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
@@ -889,19 +891,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
if (this->join_sta_bss < this->bss_cnt) {
const int i = this->join_sta_bss;
memcpy(this->bssid,
- this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_mgmt_auth(this);
}
} else {
const int i = this->join_sta_bss;
- memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_online(dev);
}
} else {
@@ -1575,30 +1577,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
for (i = 0; i < this->bss_cnt; ++i) {
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+ memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN);
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_ADDR_LEN);
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
- iwe.u.data.length = this->bss_set[i].ssid.el.len;
+ iwe.u.data.length = this->bss_set[i].req.ssid.el.len;
current_ev = iwe_stream_add_point(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe,
- this->bss_set[i].ssid.essid);
+ this->bss_set[i].req.ssid.essid);
iwe.cmd = SIOCGIWMODE;
- iwe.u.mode = this->bss_set[i].bss_type;
+ iwe.u.mode = this->bss_set[i].req.bss_type;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_UINT_LEN);
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+ iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan;
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_FREQ_LEN);
iwe.cmd = SIOCGIWENCODE;
- if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+ if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
--
2.30.2
From: Sean Christopherson <[email protected]>
[ Upstream commit b61a9071dc72a3c709192c0c00ab87c2b3de1d94 ]
Free the SEV device if later initialization fails. The memory isn't
technically leaked as it's tracked in the top-level device's devres
list, but unless the top-level device is removed, the memory won't be
freed and is effectively leaked.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Brijesh Singh <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccp/sev-dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
index 5b82ba7acc7c..21caed429cc5 100644
--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -989,7 +989,7 @@ int sev_dev_init(struct psp_device *psp)
if (!sev->vdata) {
ret = -ENODEV;
dev_err(dev, "sev: missing driver data\n");
- goto e_err;
+ goto e_sev;
}
psp_set_sev_irq_handler(psp, sev_irq_handler, sev);
@@ -1004,6 +1004,8 @@ int sev_dev_init(struct psp_device *psp)
e_irq:
psp_clear_sev_irq_handler(psp);
+e_sev:
+ devm_kfree(dev, sev);
e_err:
psp->sev_data = NULL;
--
2.30.2
From: David Ward <[email protected]>
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 5fb9653d9131..8ae2e2eaad3d 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -1117,12 +1117,11 @@ static const struct dmi_system_id force_combo_jack_table[] = {
{ }
};
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
{
- .ident = "Dell Dino",
+ .ident = "Dell",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
}
},
{ }
@@ -1133,7 +1132,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
{
struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt286_priv *rt286;
- int i, ret, val;
+ int i, ret, vendor_id;
rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286),
GFP_KERNEL);
@@ -1149,14 +1148,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
}
ret = regmap_read(rt286->regmap,
- RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+ RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
if (ret != 0) {
dev_err(&i2c->dev, "I2C error %d\n", ret);
return ret;
}
- if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+ if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
dev_err(&i2c->dev,
- "Device with ID register %#x is not rt286\n", val);
+ "Device with ID register %#x is not rt286\n",
+ vendor_id);
return -ENODEV;
}
@@ -1180,8 +1180,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt286->pdata = *pdata;
- if (dmi_check_system(force_combo_jack_table) ||
- dmi_check_system(dmi_dell_dino))
+ if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+ dmi_check_system(force_combo_jack_table))
rt286->pdata.cbj_en = true;
regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1220,7 +1220,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
- if (dmi_check_system(dmi_dell_dino)) {
+ if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
regmap_update_bits(rt286->regmap,
RT286_SET_GPIO_MASK, 0x40, 0x40);
regmap_update_bits(rt286->regmap,
--
2.30.2
From: Felix Fietkau <[email protected]>
[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.
Signed-off-by: Felix Fietkau <[email protected]>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 6d2d60675ffd..d930fcda9c3b 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1319,7 +1319,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
skb->protocol = eth_type_trans(skb, netdev);
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- RX_DMA_VID(trxd.rxd3))
+ (trxd.rxd2 & RX_DMA_VTAG))
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
RX_DMA_VID(trxd.rxd3));
skb_record_rx_queue(skb, 0);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 454cfcd465fd..73ce1f0f307a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -295,6 +295,7 @@
#define RX_DMA_LSO BIT(30)
#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
+#define RX_DMA_VTAG BIT(15)
/* QDMA descriptor rxd3 */
#define RX_DMA_VID(_x) ((_x) & 0xfff)
--
2.30.2
From: Petr Machata <[email protected]>
[ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ]
The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.
In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.
Signed-off-by: Petr Machata <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh
index b0cb1aaffdda..33ddd01689be 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh
@@ -507,8 +507,8 @@ do_red_test()
check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
local diff=$((limit - backlog))
pct=$((100 * diff / limit))
- ((0 <= pct && pct <= 5))
- check_err $? "backlog $backlog / $limit expected <= 5% distance"
+ ((0 <= pct && pct <= 10))
+ check_err $? "backlog $backlog / $limit expected <= 10% distance"
log_test "TC $((vlan - 10)): RED backlog > limit"
stop_traffic
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 7fbf359bb2c19c824cbb1954020680824f6ee5a5 ]
Support VF device IDs used by the Hyper-V hypervisor.
Reviewed-by: Vasundhara Volam <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7ddc2e2e4976..4385b42a2b63 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -122,7 +122,10 @@ enum board_idx {
NETXTREME_E_VF,
NETXTREME_C_VF,
NETXTREME_S_VF,
+ NETXTREME_C_VF_HV,
+ NETXTREME_E_VF_HV,
NETXTREME_E_P5_VF,
+ NETXTREME_E_P5_VF_HV,
};
/* indexed by enum above */
@@ -170,7 +173,10 @@ static const struct {
[NETXTREME_E_VF] = { "Broadcom NetXtreme-E Ethernet Virtual Function" },
[NETXTREME_C_VF] = { "Broadcom NetXtreme-C Ethernet Virtual Function" },
[NETXTREME_S_VF] = { "Broadcom NetXtreme-S Ethernet Virtual Function" },
+ [NETXTREME_C_VF_HV] = { "Broadcom NetXtreme-C Virtual Function for Hyper-V" },
+ [NETXTREME_E_VF_HV] = { "Broadcom NetXtreme-E Virtual Function for Hyper-V" },
[NETXTREME_E_P5_VF] = { "Broadcom BCM5750X NetXtreme-E Ethernet Virtual Function" },
+ [NETXTREME_E_P5_VF_HV] = { "Broadcom BCM5750X NetXtreme-E Virtual Function for Hyper-V" },
};
static const struct pci_device_id bnxt_pci_tbl[] = {
@@ -222,15 +228,25 @@ static const struct pci_device_id bnxt_pci_tbl[] = {
{ PCI_VDEVICE(BROADCOM, 0xd804), .driver_data = BCM58804 },
#ifdef CONFIG_BNXT_SRIOV
{ PCI_VDEVICE(BROADCOM, 0x1606), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x1607), .driver_data = NETXTREME_E_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x1608), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x1609), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16bd), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x16c1), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16c2), .driver_data = NETXTREME_C_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c3), .driver_data = NETXTREME_C_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c4), .driver_data = NETXTREME_E_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c5), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x16cb), .driver_data = NETXTREME_C_VF },
{ PCI_VDEVICE(BROADCOM, 0x16d3), .driver_data = NETXTREME_E_VF },
{ PCI_VDEVICE(BROADCOM, 0x16dc), .driver_data = NETXTREME_E_VF },
{ PCI_VDEVICE(BROADCOM, 0x16e1), .driver_data = NETXTREME_C_VF },
{ PCI_VDEVICE(BROADCOM, 0x16e5), .driver_data = NETXTREME_C_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16e6), .driver_data = NETXTREME_C_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x1806), .driver_data = NETXTREME_E_P5_VF },
{ PCI_VDEVICE(BROADCOM, 0x1807), .driver_data = NETXTREME_E_P5_VF },
+ { PCI_VDEVICE(BROADCOM, 0x1808), .driver_data = NETXTREME_E_P5_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x1809), .driver_data = NETXTREME_E_P5_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0xd800), .driver_data = NETXTREME_S_VF },
#endif
{ 0 }
@@ -263,7 +279,8 @@ static struct workqueue_struct *bnxt_pf_wq;
static bool bnxt_vf_pciid(enum board_idx idx)
{
return (idx == NETXTREME_C_VF || idx == NETXTREME_E_VF ||
- idx == NETXTREME_S_VF || idx == NETXTREME_E_P5_VF);
+ idx == NETXTREME_S_VF || idx == NETXTREME_C_VF_HV ||
+ idx == NETXTREME_E_VF_HV || idx == NETXTREME_E_P5_VF);
}
#define DB_CP_REARM_FLAGS (DB_KEY_CP | DB_IDX_VALID)
--
2.30.2
From: Petr Machata <[email protected]>
[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ]
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.
However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.
To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../drivers/net/mlxsw/mirror_gre_scale.sh | 3 ++-
.../selftests/net/forwarding/mirror_lib.sh | 19 +++++++++++++++++--
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
index 6f3a70df63bc..e00435753008 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
@@ -120,12 +120,13 @@ __mirror_gre_test()
sleep 5
for ((i = 0; i < count; ++i)); do
+ local sip=$(mirror_gre_ipv6_addr 1 $i)::1
local dip=$(mirror_gre_ipv6_addr 1 $i)::2
local htun=h3-gt6-$i
local message
icmp6_capture_install $htun
- mirror_test v$h1 "" $dip $htun 100 10
+ mirror_test v$h1 $sip $dip $htun 100 10
icmp6_capture_uninstall $htun
done
}
diff --git a/tools/testing/selftests/net/forwarding/mirror_lib.sh b/tools/testing/selftests/net/forwarding/mirror_lib.sh
index 13db1cb50e57..6406cd76a19d 100644
--- a/tools/testing/selftests/net/forwarding/mirror_lib.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_lib.sh
@@ -20,6 +20,13 @@ mirror_uninstall()
tc filter del dev $swp1 $direction pref 1000
}
+is_ipv6()
+{
+ local addr=$1; shift
+
+ [[ -z ${addr//[0-9a-fA-F:]/} ]]
+}
+
mirror_test()
{
local vrf_name=$1; shift
@@ -29,9 +36,17 @@ mirror_test()
local pref=$1; shift
local expect=$1; shift
+ if is_ipv6 $dip; then
+ local proto=-6
+ local type="icmp6 type=128" # Echo request.
+ else
+ local proto=
+ local type="icmp echoreq"
+ fi
+
local t0=$(tc_rule_stats_get $dev $pref)
- $MZ $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
- -c 10 -d 100msec -t icmp type=8
+ $MZ $proto $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
+ -c 10 -d 100msec -t $type
sleep 0.5
local t1=$(tc_rule_stats_get $dev $pref)
local delta=$((t1 - t0))
--
2.30.2
From: Sergei Trofimovich <[email protected]>
[ Upstream commit 99e729bd40fb3272fa4b0140839d5e957b58588a ]
Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:
$ cat /sys/kernel/debug/page_owner
<oops>
CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
ip is at dereference_module_function_descriptor+0x41/0x100
Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.
All section headers are already freed after module is laoded successfully.
To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.
To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sergei Trofimovich <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/ia64/include/asm/module.h | 6 +++++-
arch/ia64/kernel/module.c | 29 +++++++++++++++++++++++++----
2 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h
index 5a29652e6def..7271b9c5fc76 100644
--- a/arch/ia64/include/asm/module.h
+++ b/arch/ia64/include/asm/module.h
@@ -14,16 +14,20 @@
struct elf64_shdr; /* forward declration */
struct mod_arch_specific {
+ /* Used only at module load time. */
struct elf64_shdr *core_plt; /* core PLT section */
struct elf64_shdr *init_plt; /* init PLT section */
struct elf64_shdr *got; /* global offset table */
struct elf64_shdr *opd; /* official procedure descriptors */
struct elf64_shdr *unwind; /* unwind-table section */
unsigned long gp; /* global-pointer for module */
+ unsigned int next_got_entry; /* index of next available got entry */
+ /* Used at module run and cleanup time. */
void *core_unw_table; /* core unwind-table cookie returned by unwinder */
void *init_unw_table; /* init unwind-table cookie returned by unwinder */
- unsigned int next_got_entry; /* index of next available got entry */
+ void *opd_addr; /* symbolize uses .opd to get to actual function */
+ unsigned long opd_size;
};
#define ARCH_SHF_SMALL SHF_IA_64_SHORT
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 00a496cb346f..2cba53c1da82 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -905,9 +905,31 @@ register_unwind_table (struct module *mod)
int
module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
{
+ struct mod_arch_specific *mas = &mod->arch;
+
DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
- if (mod->arch.unwind)
+ if (mas->unwind)
register_unwind_table(mod);
+
+ /*
+ * ".opd" was already relocated to the final destination. Store
+ * it's address for use in symbolizer.
+ */
+ mas->opd_addr = (void *)mas->opd->sh_addr;
+ mas->opd_size = mas->opd->sh_size;
+
+ /*
+ * Module relocation was already done at this point. Section
+ * headers are about to be deleted. Wipe out load-time context.
+ */
+ mas->core_plt = NULL;
+ mas->init_plt = NULL;
+ mas->got = NULL;
+ mas->opd = NULL;
+ mas->unwind = NULL;
+ mas->gp = 0;
+ mas->next_got_entry = 0;
+
return 0;
}
@@ -926,10 +948,9 @@ module_arch_cleanup (struct module *mod)
void *dereference_module_function_descriptor(struct module *mod, void *ptr)
{
- Elf64_Shdr *opd = mod->arch.opd;
+ struct mod_arch_specific *mas = &mod->arch;
- if (ptr < (void *)opd->sh_addr ||
- ptr >= (void *)(opd->sh_addr + opd->sh_size))
+ if (ptr < mas->opd_addr || ptr >= mas->opd_addr + mas->opd_size)
return ptr;
return dereference_function_descriptor(ptr);
--
2.30.2
From: Petr Mladek <[email protected]>
[ Upstream commit 7c0012f522c802d25be102bafe54f333168e6119 ]
Patch series "watchdog/softlockup: Report overall time and some cleanup", v2.
I dug deep into the softlockup watchdog history when time permitted this
year. And reworked the patchset that fixed timestamps and cleaned up the
code[2].
I split it into very small steps and did even more code clean up. The
result looks quite strightforward and I am pretty confident with the
changes.
[1] v2: https://lore.kernel.org/r/[email protected]
[2] v1: https://lore.kernel.org/r/[email protected]
This patch (of 6):
There are many touch_*watchdog() functions. They are called in situations
where the watchdog could report false positives or create unnecessary
noise. For example, when CPU is entering idle mode, a virtual machine is
stopped, or a lot of messages are printed in the atomic context.
These functions set SOFTLOCKUP_RESET instead of a real timestamp. It
allows to call them even in a context where jiffies might be outdated.
For example, in an atomic context.
The real timestamp is set by __touch_watchdog() that is called from the
watchdog timer callback.
Rename this callback to update_touch_ts(). It better describes the effect
and clearly distinguish is from the other touch_*watchdog() functions.
Another motivation is that two timestamps are going to be used. One will
be used for the total softlockup time. The other will be used to measure
time since the last report. The new function name will help to
distinguish which timestamp is being updated.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Vincent Whitchurch <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watchdog.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 71109065bd8e..c58244064de8 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -236,7 +236,7 @@ static void set_sample_period(void)
}
/* Commands for resetting the watchdog */
-static void __touch_watchdog(void)
+static void update_touch_ts(void)
{
__this_cpu_write(watchdog_touch_ts, get_timestamp());
}
@@ -331,7 +331,7 @@ static DEFINE_PER_CPU(struct cpu_stop_work, softlockup_stop_work);
*/
static int softlockup_fn(void *data)
{
- __touch_watchdog();
+ update_touch_ts();
complete(this_cpu_ptr(&softlockup_completion));
return 0;
@@ -374,7 +374,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
/* Clear the guest paused flag on watchdog reset */
kvm_check_and_clear_guest_paused();
- __touch_watchdog();
+ update_touch_ts();
return HRTIMER_RESTART;
}
@@ -460,7 +460,7 @@ static void watchdog_enable(unsigned int cpu)
HRTIMER_MODE_REL_PINNED_HARD);
/* Initialize timestamp */
- __touch_watchdog();
+ update_touch_ts();
/* Enable the perf event */
if (watchdog_enabled & NMI_WATCHDOG_ENABLED)
watchdog_nmi_enable(cpu);
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit c1d9e34e11281a8ba1a1c54e4db554232a461488 ]
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ethtool/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index ec2cd7aab5ad..2917af3f5ac1 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -489,7 +489,7 @@ store_link_ksettings_for_user(void __user *to,
{
struct ethtool_link_usettings link_usettings;
- memcpy(&link_usettings.base, &from->base, sizeof(link_usettings));
+ memcpy(&link_usettings, from, sizeof(link_usettings));
bitmap_to_arr32(link_usettings.link_modes.supported,
from->link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS);
--
2.30.2
From: Petr Mladek <[email protected]>
[ Upstream commit c9ad17c991492f4390f42598f6ab0531f87eed07 ]
The softlockup situation might stay for a long time or even forever. When
it happens, the softlockup debug messages are printed in regular intervals
defined by get_softlockup_thresh().
There is a mystery. The repeated message is printed after the full
interval that is defined by get_softlockup_thresh(). But the timer
callback is called more often as defined by sample_period. The code looks
like the soflockup should get reported in every sample_period when it was
once behind the thresh.
It works only by chance. The watchdog is touched when printing the stall
report, for example, in printk_stack_address().
Make the behavior clear and predictable by explicitly updating the
timestamp in watchdog_timer_fn() when the report gets printed.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vincent Whitchurch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watchdog.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index c58244064de8..7776d53a015c 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -409,6 +409,9 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
}
}
+ /* Start period for the next softlockup warning. */
+ update_touch_ts();
+
pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
smp_processor_id(), duration,
current->comm, task_pid_nr(current));
--
2.30.2
From: Masahiro Yamada <[email protected]>
[ Upstream commit 69bc8d386aebbd91a6bb44b6d33f77c8dfa9ed8c ]
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.gitignore | 1 +
Documentation/dontdiff | 1 +
Makefile | 2 +-
scripts/Makefile.modpost | 15 ++++++++++++++-
scripts/mod/modpost.c | 15 +--------------
5 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/.gitignore b/.gitignore
index d01cda8e1177..67d2f3503128 100644
--- a/.gitignore
+++ b/.gitignore
@@ -55,6 +55,7 @@ modules.order
/tags
/TAGS
/linux
+/modules-only.symvers
/vmlinux
/vmlinux.32
/vmlinux.symvers
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index e361fc95ca29..82e3eee7363b 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -178,6 +178,7 @@ mktables
mktree
mkutf8data
modpost
+modules-only.symvers
modules.builtin
modules.builtin.modinfo
modules.nsdeps
diff --git a/Makefile b/Makefile
index 39f14ad009ae..1ee3fb1dde59 100644
--- a/Makefile
+++ b/Makefile
@@ -1483,7 +1483,7 @@ endif # CONFIG_MODULES
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
-CLEAN_FILES += include/ksym vmlinux.symvers \
+CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
modules.builtin modules.builtin.modinfo modules.nsdeps \
compile_commands.json
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index f54b6ac37ac2..12a87be0fb44 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -65,7 +65,20 @@ else
ifeq ($(KBUILD_EXTMOD),)
input-symdump := vmlinux.symvers
-output-symdump := Module.symvers
+output-symdump := modules-only.symvers
+
+quiet_cmd_cat = GEN $@
+ cmd_cat = cat $(real-prereqs) > $@
+
+ifneq ($(wildcard vmlinux.symvers),)
+
+__modpost: Module.symvers
+Module.symvers: vmlinux.symvers modules-only.symvers FORCE
+ $(call if_changed,cat)
+
+targets += Module.symvers
+
+endif
else
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index f882ce0d9327..e08f75aed429 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -2481,19 +2481,6 @@ fail:
fatal("parse error in symbol dump file\n");
}
-/* For normal builds always dump all symbols.
- * For external modules only dump symbols
- * that are not read from kernel Module.symvers.
- **/
-static int dump_sym(struct symbol *sym)
-{
- if (!external_module)
- return 1;
- if (sym->module->from_dump)
- return 0;
- return 1;
-}
-
static void write_dump(const char *fname)
{
struct buffer buf = { };
@@ -2504,7 +2491,7 @@ static void write_dump(const char *fname)
for (n = 0; n < SYMBOL_HASH_SIZE ; n++) {
symbol = symbolhash[n];
while (symbol) {
- if (dump_sym(symbol)) {
+ if (!symbol->module->from_dump) {
namespace = symbol->namespace;
buf_printf(&buf, "0x%08x\t%s\t%s\t%s\t%s\n",
symbol->crc, symbol->name,
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ]
When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args()
returns zero or -ENOENT to count, no error return code of
thermal_of_populate_bind_params() is assigned.
To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these
cases, respectively.
Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/thermal_of.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 69ef12f852b7..5b76f9a1280d 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -704,14 +704,17 @@ static int thermal_of_populate_bind_params(struct device_node *np,
count = of_count_phandle_with_args(np, "cooling-device",
"#cooling-cells");
- if (!count) {
+ if (count <= 0) {
pr_err("Add a cooling_device property with at least one device\n");
+ ret = -ENOENT;
goto end;
}
__tcbp = kcalloc(count, sizeof(*__tcbp), GFP_KERNEL);
- if (!__tcbp)
+ if (!__tcbp) {
+ ret = -ENOMEM;
goto end;
+ }
for (i = 0; i < count; i++) {
ret = of_parse_phandle_with_args(np, "cooling-device",
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit fa4320cefb8537a70cc28c55d311a1f569697cd3 ]
Like other filesystem does, we introduce a new file f2fs.h in path of
include/uapi/linux/, and move f2fs-specified ioctl interface definitions
to that file, after then, in order to use those definitions, userspace
developer only need to include the new header file rather than
copy & paste definitions from fs/f2fs/f2fs.h.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
MAINTAINERS | 1 +
fs/f2fs/f2fs.h | 79 ---------------------------------
fs/f2fs/file.c | 1 +
include/trace/events/f2fs.h | 1 +
include/uapi/linux/f2fs.h | 87 +++++++++++++++++++++++++++++++++++++
5 files changed, 90 insertions(+), 79 deletions(-)
create mode 100644 include/uapi/linux/f2fs.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 24cdfcf334ea..4fef10dd2975 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6694,6 +6694,7 @@ F: Documentation/filesystems/f2fs.rst
F: fs/f2fs/
F: include/linux/f2fs_fs.h
F: include/trace/events/f2fs.h
+F: include/uapi/linux/f2fs.h
F71805F HARDWARE MONITORING DRIVER
M: Jean Delvare <[email protected]>
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 699815e94bd3..af294eb23283 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -402,85 +402,6 @@ static inline bool __has_cursum_space(struct f2fs_journal *journal,
return size <= MAX_SIT_JENTRIES(journal);
}
-/*
- * f2fs-specific ioctl commands
- */
-#define F2FS_IOCTL_MAGIC 0xf5
-#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1)
-#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2)
-#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3)
-#define F2FS_IOC_RELEASE_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 4)
-#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
-#define F2FS_IOC_GARBAGE_COLLECT _IOW(F2FS_IOCTL_MAGIC, 6, __u32)
-#define F2FS_IOC_WRITE_CHECKPOINT _IO(F2FS_IOCTL_MAGIC, 7)
-#define F2FS_IOC_DEFRAGMENT _IOWR(F2FS_IOCTL_MAGIC, 8, \
- struct f2fs_defragment)
-#define F2FS_IOC_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \
- struct f2fs_move_range)
-#define F2FS_IOC_FLUSH_DEVICE _IOW(F2FS_IOCTL_MAGIC, 10, \
- struct f2fs_flush_device)
-#define F2FS_IOC_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11, \
- struct f2fs_gc_range)
-#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, __u32)
-#define F2FS_IOC_SET_PIN_FILE _IOW(F2FS_IOCTL_MAGIC, 13, __u32)
-#define F2FS_IOC_GET_PIN_FILE _IOR(F2FS_IOCTL_MAGIC, 14, __u32)
-#define F2FS_IOC_PRECACHE_EXTENTS _IO(F2FS_IOCTL_MAGIC, 15)
-#define F2FS_IOC_RESIZE_FS _IOW(F2FS_IOCTL_MAGIC, 16, __u64)
-#define F2FS_IOC_GET_COMPRESS_BLOCKS _IOR(F2FS_IOCTL_MAGIC, 17, __u64)
-#define F2FS_IOC_RELEASE_COMPRESS_BLOCKS \
- _IOR(F2FS_IOCTL_MAGIC, 18, __u64)
-#define F2FS_IOC_RESERVE_COMPRESS_BLOCKS \
- _IOR(F2FS_IOCTL_MAGIC, 19, __u64)
-#define F2FS_IOC_SEC_TRIM_FILE _IOW(F2FS_IOCTL_MAGIC, 20, \
- struct f2fs_sectrim_range)
-
-/*
- * should be same as XFS_IOC_GOINGDOWN.
- * Flags for going down operation used by FS_IOC_GOINGDOWN
- */
-#define F2FS_IOC_SHUTDOWN _IOR('X', 125, __u32) /* Shutdown */
-#define F2FS_GOING_DOWN_FULLSYNC 0x0 /* going down with full sync */
-#define F2FS_GOING_DOWN_METASYNC 0x1 /* going down with metadata */
-#define F2FS_GOING_DOWN_NOSYNC 0x2 /* going down */
-#define F2FS_GOING_DOWN_METAFLUSH 0x3 /* going down with meta flush */
-#define F2FS_GOING_DOWN_NEED_FSCK 0x4 /* going down to trigger fsck */
-
-/*
- * Flags used by F2FS_IOC_SEC_TRIM_FILE
- */
-#define F2FS_TRIM_FILE_DISCARD 0x1 /* send discard command */
-#define F2FS_TRIM_FILE_ZEROOUT 0x2 /* zero out */
-#define F2FS_TRIM_FILE_MASK 0x3
-
-struct f2fs_gc_range {
- u32 sync;
- u64 start;
- u64 len;
-};
-
-struct f2fs_defragment {
- u64 start;
- u64 len;
-};
-
-struct f2fs_move_range {
- u32 dst_fd; /* destination fd */
- u64 pos_in; /* start position in src_fd */
- u64 pos_out; /* start position in dst_fd */
- u64 len; /* size to move */
-};
-
-struct f2fs_flush_device {
- u32 dev_num; /* device number to flush */
- u32 segments; /* # of segments to flush */
-};
-
-struct f2fs_sectrim_range {
- u64 start;
- u64 len;
- u64 flags;
-};
-
/* for inline stuff */
#define DEF_INLINE_RESERVED_SIZE 1
static inline int get_extra_isize(struct inode *inode);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 498e3aac7934..28f0bde38806 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -31,6 +31,7 @@
#include "gc.h"
#include "trace.h"
#include <trace/events/f2fs.h>
+#include <uapi/linux/f2fs.h>
static vm_fault_t f2fs_filemap_fault(struct vm_fault *vmf)
{
diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index f8f1e85ff130..56b113e3cd6a 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -6,6 +6,7 @@
#define _TRACE_F2FS_H
#include <linux/tracepoint.h>
+#include <uapi/linux/f2fs.h>
#define show_dev(dev) MAJOR(dev), MINOR(dev)
#define show_dev_ino(entry) show_dev(entry->dev), (unsigned long)entry->ino
diff --git a/include/uapi/linux/f2fs.h b/include/uapi/linux/f2fs.h
new file mode 100644
index 000000000000..28bcfe8d2c27
--- /dev/null
+++ b/include/uapi/linux/f2fs.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _UAPI_LINUX_F2FS_H
+#define _UAPI_LINUX_F2FS_H
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * f2fs-specific ioctl commands
+ */
+#define F2FS_IOCTL_MAGIC 0xf5
+#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1)
+#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2)
+#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3)
+#define F2FS_IOC_RELEASE_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 4)
+#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
+#define F2FS_IOC_GARBAGE_COLLECT _IOW(F2FS_IOCTL_MAGIC, 6, __u32)
+#define F2FS_IOC_WRITE_CHECKPOINT _IO(F2FS_IOCTL_MAGIC, 7)
+#define F2FS_IOC_DEFRAGMENT _IOWR(F2FS_IOCTL_MAGIC, 8, \
+ struct f2fs_defragment)
+#define F2FS_IOC_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \
+ struct f2fs_move_range)
+#define F2FS_IOC_FLUSH_DEVICE _IOW(F2FS_IOCTL_MAGIC, 10, \
+ struct f2fs_flush_device)
+#define F2FS_IOC_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11, \
+ struct f2fs_gc_range)
+#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, __u32)
+#define F2FS_IOC_SET_PIN_FILE _IOW(F2FS_IOCTL_MAGIC, 13, __u32)
+#define F2FS_IOC_GET_PIN_FILE _IOR(F2FS_IOCTL_MAGIC, 14, __u32)
+#define F2FS_IOC_PRECACHE_EXTENTS _IO(F2FS_IOCTL_MAGIC, 15)
+#define F2FS_IOC_RESIZE_FS _IOW(F2FS_IOCTL_MAGIC, 16, __u64)
+#define F2FS_IOC_GET_COMPRESS_BLOCKS _IOR(F2FS_IOCTL_MAGIC, 17, __u64)
+#define F2FS_IOC_RELEASE_COMPRESS_BLOCKS \
+ _IOR(F2FS_IOCTL_MAGIC, 18, __u64)
+#define F2FS_IOC_RESERVE_COMPRESS_BLOCKS \
+ _IOR(F2FS_IOCTL_MAGIC, 19, __u64)
+#define F2FS_IOC_SEC_TRIM_FILE _IOW(F2FS_IOCTL_MAGIC, 20, \
+ struct f2fs_sectrim_range)
+
+/*
+ * should be same as XFS_IOC_GOINGDOWN.
+ * Flags for going down operation used by FS_IOC_GOINGDOWN
+ */
+#define F2FS_IOC_SHUTDOWN _IOR('X', 125, __u32) /* Shutdown */
+#define F2FS_GOING_DOWN_FULLSYNC 0x0 /* going down with full sync */
+#define F2FS_GOING_DOWN_METASYNC 0x1 /* going down with metadata */
+#define F2FS_GOING_DOWN_NOSYNC 0x2 /* going down */
+#define F2FS_GOING_DOWN_METAFLUSH 0x3 /* going down with meta flush */
+#define F2FS_GOING_DOWN_NEED_FSCK 0x4 /* going down to trigger fsck */
+
+/*
+ * Flags used by F2FS_IOC_SEC_TRIM_FILE
+ */
+#define F2FS_TRIM_FILE_DISCARD 0x1 /* send discard command */
+#define F2FS_TRIM_FILE_ZEROOUT 0x2 /* zero out */
+#define F2FS_TRIM_FILE_MASK 0x3
+
+struct f2fs_gc_range {
+ __u32 sync;
+ __u64 start;
+ __u64 len;
+};
+
+struct f2fs_defragment {
+ __u64 start;
+ __u64 len;
+};
+
+struct f2fs_move_range {
+ __u32 dst_fd; /* destination fd */
+ __u64 pos_in; /* start position in src_fd */
+ __u64 pos_out; /* start position in dst_fd */
+ __u64 len; /* size to move */
+};
+
+struct f2fs_flush_device {
+ __u32 dev_num; /* device number to flush */
+ __u32 segments; /* # of segments to flush */
+};
+
+struct f2fs_sectrim_range {
+ __u64 start;
+ __u64 len;
+ __u64 flags;
+};
+
+#endif /* _UAPI_LINUX_F2FS_H */
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 34178b1bc4b5c936eab3adb4835578093095a571 ]
Eric reported a ioctl bug in below link:
https://lore.kernel.org/linux-f2fs-devel/[email protected]/
That said, on some 32-bit architectures, u64 has only 32-bit alignment,
notably i386 and x86_32, so that size of struct f2fs_gc_range compiled
in x86_32 is 20 bytes, however the size in x86_64 is 24 bytes, binary
compiled in x86_32 can not call F2FS_IOC_GARBAGE_COLLECT_RANGE successfully
due to mismatched value of ioctl command in between binary and f2fs
module, similarly, F2FS_IOC_MOVE_RANGE will fail too.
In this patch we introduce two ioctls for compatibility of above special
32-bit binary:
- F2FS_IOC32_GARBAGE_COLLECT_RANGE
- F2FS_IOC32_MOVE_RANGE
Reported-by: Eric Biggers <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/file.c | 137 +++++++++++++++++++++++++++++++++++++------------
1 file changed, 104 insertions(+), 33 deletions(-)
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 28f0bde38806..6850fb2081c8 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2496,26 +2496,19 @@ out:
return ret;
}
-static int f2fs_ioc_gc_range(struct file *filp, unsigned long arg)
+static int __f2fs_ioc_gc_range(struct file *filp, struct f2fs_gc_range *range)
{
- struct inode *inode = file_inode(filp);
- struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
- struct f2fs_gc_range range;
+ struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(filp));
u64 end;
int ret;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
-
- if (copy_from_user(&range, (struct f2fs_gc_range __user *)arg,
- sizeof(range)))
- return -EFAULT;
-
if (f2fs_readonly(sbi->sb))
return -EROFS;
- end = range.start + range.len;
- if (end < range.start || range.start < MAIN_BLKADDR(sbi) ||
+ end = range->start + range->len;
+ if (end < range->start || range->start < MAIN_BLKADDR(sbi) ||
end >= MAX_BLKADDR(sbi))
return -EINVAL;
@@ -2524,7 +2517,7 @@ static int f2fs_ioc_gc_range(struct file *filp, unsigned long arg)
return ret;
do_more:
- if (!range.sync) {
+ if (!range->sync) {
if (!down_write_trylock(&sbi->gc_lock)) {
ret = -EBUSY;
goto out;
@@ -2533,20 +2526,30 @@ do_more:
down_write(&sbi->gc_lock);
}
- ret = f2fs_gc(sbi, range.sync, true, GET_SEGNO(sbi, range.start));
+ ret = f2fs_gc(sbi, range->sync, true, GET_SEGNO(sbi, range->start));
if (ret) {
if (ret == -EBUSY)
ret = -EAGAIN;
goto out;
}
- range.start += BLKS_PER_SEC(sbi);
- if (range.start <= end)
+ range->start += BLKS_PER_SEC(sbi);
+ if (range->start <= end)
goto do_more;
out:
mnt_drop_write_file(filp);
return ret;
}
+static int f2fs_ioc_gc_range(struct file *filp, unsigned long arg)
+{
+ struct f2fs_gc_range range;
+
+ if (copy_from_user(&range, (struct f2fs_gc_range __user *)arg,
+ sizeof(range)))
+ return -EFAULT;
+ return __f2fs_ioc_gc_range(filp, &range);
+}
+
static int f2fs_ioc_write_checkpoint(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
@@ -2883,9 +2886,9 @@ out:
return ret;
}
-static int f2fs_ioc_move_range(struct file *filp, unsigned long arg)
+static int __f2fs_ioc_move_range(struct file *filp,
+ struct f2fs_move_range *range)
{
- struct f2fs_move_range range;
struct fd dst;
int err;
@@ -2893,11 +2896,7 @@ static int f2fs_ioc_move_range(struct file *filp, unsigned long arg)
!(filp->f_mode & FMODE_WRITE))
return -EBADF;
- if (copy_from_user(&range, (struct f2fs_move_range __user *)arg,
- sizeof(range)))
- return -EFAULT;
-
- dst = fdget(range.dst_fd);
+ dst = fdget(range->dst_fd);
if (!dst.file)
return -EBADF;
@@ -2910,8 +2909,8 @@ static int f2fs_ioc_move_range(struct file *filp, unsigned long arg)
if (err)
goto err_out;
- err = f2fs_move_file_range(filp, range.pos_in, dst.file,
- range.pos_out, range.len);
+ err = f2fs_move_file_range(filp, range->pos_in, dst.file,
+ range->pos_out, range->len);
mnt_drop_write_file(filp);
if (err)
@@ -2925,6 +2924,16 @@ err_out:
return err;
}
+static int f2fs_ioc_move_range(struct file *filp, unsigned long arg)
+{
+ struct f2fs_move_range range;
+
+ if (copy_from_user(&range, (struct f2fs_move_range __user *)arg,
+ sizeof(range)))
+ return -EFAULT;
+ return __f2fs_ioc_move_range(filp, &range);
+}
+
static int f2fs_ioc_flush_device(struct file *filp, unsigned long arg)
{
struct inode *inode = file_inode(filp);
@@ -3961,13 +3970,8 @@ err:
return ret;
}
-long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+static long __f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
- if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(filp)))))
- return -EIO;
- if (!f2fs_is_checkpoint_ready(F2FS_I_SB(file_inode(filp))))
- return -ENOSPC;
-
switch (cmd) {
case FS_IOC_GETFLAGS:
return f2fs_ioc_getflags(filp, arg);
@@ -4054,6 +4058,16 @@ long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
}
}
+long f2fs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(filp)))))
+ return -EIO;
+ if (!f2fs_is_checkpoint_ready(F2FS_I_SB(file_inode(filp))))
+ return -ENOSPC;
+
+ return __f2fs_ioctl(filp, cmd, arg);
+}
+
static ssize_t f2fs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
@@ -4176,8 +4190,63 @@ out:
}
#ifdef CONFIG_COMPAT
+struct compat_f2fs_gc_range {
+ u32 sync;
+ compat_u64 start;
+ compat_u64 len;
+};
+#define F2FS_IOC32_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11,\
+ struct compat_f2fs_gc_range)
+
+static int f2fs_compat_ioc_gc_range(struct file *file, unsigned long arg)
+{
+ struct compat_f2fs_gc_range __user *urange;
+ struct f2fs_gc_range range;
+ int err;
+
+ urange = compat_ptr(arg);
+ err = get_user(range.sync, &urange->sync);
+ err |= get_user(range.start, &urange->start);
+ err |= get_user(range.len, &urange->len);
+ if (err)
+ return -EFAULT;
+
+ return __f2fs_ioc_gc_range(file, &range);
+}
+
+struct compat_f2fs_move_range {
+ u32 dst_fd;
+ compat_u64 pos_in;
+ compat_u64 pos_out;
+ compat_u64 len;
+};
+#define F2FS_IOC32_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \
+ struct compat_f2fs_move_range)
+
+static int f2fs_compat_ioc_move_range(struct file *file, unsigned long arg)
+{
+ struct compat_f2fs_move_range __user *urange;
+ struct f2fs_move_range range;
+ int err;
+
+ urange = compat_ptr(arg);
+ err = get_user(range.dst_fd, &urange->dst_fd);
+ err |= get_user(range.pos_in, &urange->pos_in);
+ err |= get_user(range.pos_out, &urange->pos_out);
+ err |= get_user(range.len, &urange->len);
+ if (err)
+ return -EFAULT;
+
+ return __f2fs_ioc_move_range(file, &range);
+}
+
long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
+ if (unlikely(f2fs_cp_error(F2FS_I_SB(file_inode(file)))))
+ return -EIO;
+ if (!f2fs_is_checkpoint_ready(F2FS_I_SB(file_inode(file))))
+ return -ENOSPC;
+
switch (cmd) {
case FS_IOC32_GETFLAGS:
cmd = FS_IOC_GETFLAGS;
@@ -4188,6 +4257,10 @@ long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case FS_IOC32_GETVERSION:
cmd = FS_IOC_GETVERSION;
break;
+ case F2FS_IOC32_GARBAGE_COLLECT_RANGE:
+ return f2fs_compat_ioc_gc_range(file, arg);
+ case F2FS_IOC32_MOVE_RANGE:
+ return f2fs_compat_ioc_move_range(file, arg);
case F2FS_IOC_START_ATOMIC_WRITE:
case F2FS_IOC_COMMIT_ATOMIC_WRITE:
case F2FS_IOC_START_VOLATILE_WRITE:
@@ -4205,10 +4278,8 @@ long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case FS_IOC_GET_ENCRYPTION_KEY_STATUS:
case FS_IOC_GET_ENCRYPTION_NONCE:
case F2FS_IOC_GARBAGE_COLLECT:
- case F2FS_IOC_GARBAGE_COLLECT_RANGE:
case F2FS_IOC_WRITE_CHECKPOINT:
case F2FS_IOC_DEFRAGMENT:
- case F2FS_IOC_MOVE_RANGE:
case F2FS_IOC_FLUSH_DEVICE:
case F2FS_IOC_GET_FEATURES:
case FS_IOC_FSGETXATTR:
@@ -4229,7 +4300,7 @@ long f2fs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
default:
return -ENOIOCTLCMD;
}
- return f2fs_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
+ return __f2fs_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
}
#endif
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 3ab0598e6d860ef49d029943ba80f627c15c15d6 ]
f2fs_resize_fs() hangs in below callstack with testcase:
- mkfs 16GB image & mount image
- dd 8GB fileA
- dd 8GB fileB
- sync
- rm fileA
- sync
- resize filesystem to 8GB
kernel BUG at segment.c:2484!
Call Trace:
allocate_segment_by_default+0x92/0xf0 [f2fs]
f2fs_allocate_data_block+0x44b/0x7e0 [f2fs]
do_write_page+0x5a/0x110 [f2fs]
f2fs_outplace_write_data+0x55/0x100 [f2fs]
f2fs_do_write_data_page+0x392/0x850 [f2fs]
move_data_page+0x233/0x320 [f2fs]
do_garbage_collect+0x14d9/0x1660 [f2fs]
free_segment_range+0x1f7/0x310 [f2fs]
f2fs_resize_fs+0x118/0x330 [f2fs]
__f2fs_ioctl+0x487/0x3680 [f2fs]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The root cause is we forgot to check that whether we have enough space
in resized filesystem to store all valid blocks in before-resizing
filesystem, then allocator will run out-of-space during block migration
in free_segment_range().
Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/gc.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 1e602d0f611f..e4e8c7257454 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1979,7 +1979,20 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
/* stop CP to protect MAIN_SEC in free_segment_range */
f2fs_lock_op(sbi);
+
+ spin_lock(&sbi->stat_lock);
+ if (shrunk_blocks + valid_user_blocks(sbi) +
+ sbi->current_reserved_blocks + sbi->unusable_block_count +
+ F2FS_OPTION(sbi).root_reserved_blocks > sbi->user_block_count)
+ err = -ENOSPC;
+ spin_unlock(&sbi->stat_lock);
+
+ if (err)
+ goto out_unlock;
+
err = free_segment_range(sbi, secs, true);
+
+out_unlock:
f2fs_unlock_op(sbi);
up_write(&sbi->gc_lock);
if (err)
--
2.30.2
From: Sibi Sankar <[email protected]>
[ Upstream commit 04ff5d19cf6e2f9dbdf137c0c6eb44934d46a99c ]
Fix the sparse warnings reported by the kernel test bot by replacing
ioremap calls with memremap.
Reviewed-by: Bjorn Andersson <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_mss.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index ba6f7551242d..126a9706449a 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1182,7 +1182,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
goto release_firmware;
}
- ptr = ioremap_wc(qproc->mpss_phys + offset, phdr->p_memsz);
+ ptr = memremap(qproc->mpss_phys + offset, phdr->p_memsz, MEMREMAP_WC);
if (!ptr) {
dev_err(qproc->dev,
"unable to map memory region: %pa+%zx-%x\n",
@@ -1197,7 +1197,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
"failed to load segment %d from truncated file %s\n",
i, fw_name);
ret = -EINVAL;
- iounmap(ptr);
+ memunmap(ptr);
goto release_firmware;
}
@@ -1209,7 +1209,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
ptr, phdr->p_filesz);
if (ret) {
dev_err(qproc->dev, "failed to load %s\n", fw_name);
- iounmap(ptr);
+ memunmap(ptr);
goto release_firmware;
}
@@ -1220,7 +1220,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
memset(ptr + phdr->p_filesz, 0,
phdr->p_memsz - phdr->p_filesz);
}
- iounmap(ptr);
+ memunmap(ptr);
size += phdr->p_memsz;
code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
@@ -1287,11 +1287,11 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
}
if (!ret)
- ptr = ioremap_wc(qproc->mpss_phys + offset + cp_offset, size);
+ ptr = memremap(qproc->mpss_phys + offset + cp_offset, size, MEMREMAP_WC);
if (ptr) {
memcpy(dest, ptr, size);
- iounmap(ptr);
+ memunmap(ptr);
} else {
memset(dest, 0xff, size);
}
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 28e18ee636ba28532dbe425540af06245a0bbecb ]
The uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails. This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.
Thanks to Jaegeuk Kim for suggesting an appropriate fix.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 2a3407607028 ("f2fs: call f2fs_balance_fs only when node was changed")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/inline.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/inline.c b/fs/f2fs/inline.c
index b9e37f0b3e09..1d7dafdaffe3 100644
--- a/fs/f2fs/inline.c
+++ b/fs/f2fs/inline.c
@@ -218,7 +218,8 @@ out:
f2fs_put_page(page, 1);
- f2fs_balance_fs(sbi, dn.node_changed);
+ if (!err)
+ f2fs_balance_fs(sbi, dn.node_changed);
return err;
}
--
2.30.2
From: Bjorn Andersson <[email protected]>
[ Upstream commit 3d2ee78906af5f08d499d6aa3aa504406fa38106 ]
Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.
Reviewed-by: Mathieu Poirier <[email protected]>
Fixes: 135b9e8d1cd8 ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_mss.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 126a9706449a..ebc3e755bcbc 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1182,6 +1182,14 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
goto release_firmware;
}
+ if (phdr->p_filesz > phdr->p_memsz) {
+ dev_err(qproc->dev,
+ "refusing to load segment %d with p_filesz > p_memsz\n",
+ i);
+ ret = -EINVAL;
+ goto release_firmware;
+ }
+
ptr = memremap(qproc->mpss_phys + offset, phdr->p_memsz, MEMREMAP_WC);
if (!ptr) {
dev_err(qproc->dev,
@@ -1213,6 +1221,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
goto release_firmware;
}
+ if (seg_fw->size != phdr->p_filesz) {
+ dev_err(qproc->dev,
+ "failed to load segment %d from truncated file %s\n",
+ i, fw_name);
+ ret = -EINVAL;
+ release_firmware(seg_fw);
+ memunmap(ptr);
+ goto release_firmware;
+ }
+
release_firmware(seg_fw);
}
--
2.30.2
From: David Ward <[email protected]>
[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]
The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 8ae2e2eaad3d..eec2dd93ecbb 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -171,6 +171,9 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
case RT286_PROC_COEF:
case RT286_SET_AMP_GAIN_ADC_IN1:
case RT286_SET_AMP_GAIN_ADC_IN2:
+ case RT286_SET_GPIO_MASK:
+ case RT286_SET_GPIO_DIRECTION:
+ case RT286_SET_GPIO_DATA:
case RT286_SET_POWER(RT286_DAC_OUT1):
case RT286_SET_POWER(RT286_DAC_OUT2):
case RT286_SET_POWER(RT286_ADC_IN1):
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit a506bd5756290821a4314f502b4bafc2afcf5260 ]
The commit 1879445dfa7b ("perf/core: Set event's default
::overflow_handler()") set a default event->overflow_handler in
perf_event_alloc(), and replace the check event->overflow_handler with
is_default_overflow_handler(), but one is missing.
Currently, the bp->overflow_handler can not be NULL. As a result,
enable_single_step() is always not invoked.
Comments from Zhen Lei:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Fixes: 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()")
Signed-off-by: Zhen Lei <[email protected]>
Cc: Wang Nan <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/hw_breakpoint.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 08660ae9dcbc..b1423fb130ea 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
info->trigger = addr;
pr_debug("breakpoint fired: address = 0x%x\n", addr);
perf_bp_event(bp, regs);
- if (!bp->overflow_handler)
+ if (is_default_overflow_handler(bp))
enable_single_step(bp, addr);
goto unlock;
}
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit e1175f02291141bbd924fc578299305fcde35855 ]
Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.
To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/f2fs.h | 2 +-
fs/f2fs/file.c | 19 +++++++++----------
fs/f2fs/segment.c | 34 ++++++++++++++++++++++++++--------
3 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index f116150e45e3..c2973a1dead6 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3289,7 +3289,7 @@ void f2fs_get_new_segment(struct f2fs_sb_info *sbi,
unsigned int *newseg, bool new_sec, int dir);
void f2fs_allocate_segment_for_resize(struct f2fs_sb_info *sbi, int type,
unsigned int start, unsigned int end);
-void f2fs_allocate_new_segment(struct f2fs_sb_info *sbi, int type);
+void f2fs_allocate_new_section(struct f2fs_sb_info *sbi, int type);
void f2fs_allocate_new_segments(struct f2fs_sb_info *sbi);
int f2fs_trim_fs(struct f2fs_sb_info *sbi, struct fstrim_range *range);
bool f2fs_exist_trim_candidates(struct f2fs_sb_info *sbi,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index df963686c4dc..e926770f89c5 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1643,27 +1643,26 @@ static int expand_inode_data(struct inode *inode, loff_t offset,
return 0;
if (f2fs_is_pinned_file(inode)) {
- block_t len = (map.m_len >> sbi->log_blocks_per_seg) <<
- sbi->log_blocks_per_seg;
+ block_t sec_blks = BLKS_PER_SEC(sbi);
+ block_t sec_len = roundup(map.m_len, sec_blks);
block_t done = 0;
- if (map.m_len % sbi->blocks_per_seg)
- len += sbi->blocks_per_seg;
-
- map.m_len = sbi->blocks_per_seg;
+ map.m_len = sec_blks;
next_alloc:
if (has_not_enough_free_secs(sbi, 0,
GET_SEC_FROM_SEG(sbi, overprovision_segments(sbi)))) {
down_write(&sbi->gc_lock);
err = f2fs_gc(sbi, true, false, false, NULL_SEGNO);
- if (err && err != -ENODATA && err != -EAGAIN)
+ if (err && err != -ENODATA && err != -EAGAIN) {
+ map.m_len = done;
goto out_err;
+ }
}
down_write(&sbi->pin_sem);
f2fs_lock_op(sbi);
- f2fs_allocate_new_segment(sbi, CURSEG_COLD_DATA_PINNED);
+ f2fs_allocate_new_section(sbi, CURSEG_COLD_DATA_PINNED);
f2fs_unlock_op(sbi);
map.m_seg_type = CURSEG_COLD_DATA_PINNED;
@@ -1672,9 +1671,9 @@ next_alloc:
up_write(&sbi->pin_sem);
done += map.m_len;
- len -= map.m_len;
+ sec_len -= map.m_len;
map.m_lblk += map.m_len;
- if (!err && len)
+ if (!err && sec_len)
goto next_alloc;
map.m_len = done;
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index f9e7280c39d9..d696d4713333 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2903,7 +2903,8 @@ unlock:
up_read(&SM_I(sbi)->curseg_lock);
}
-static void __allocate_new_segment(struct f2fs_sb_info *sbi, int type)
+static void __allocate_new_segment(struct f2fs_sb_info *sbi, int type,
+ bool new_sec)
{
struct curseg_info *curseg = CURSEG_I(sbi, type);
unsigned int old_segno;
@@ -2911,10 +2912,22 @@ static void __allocate_new_segment(struct f2fs_sb_info *sbi, int type)
if (!curseg->inited)
goto alloc;
- if (!curseg->next_blkoff &&
- !get_valid_blocks(sbi, curseg->segno, false) &&
- !get_ckpt_valid_blocks(sbi, curseg->segno))
- return;
+ if (curseg->next_blkoff ||
+ get_valid_blocks(sbi, curseg->segno, new_sec))
+ goto alloc;
+
+ if (new_sec) {
+ unsigned int segno = START_SEGNO(curseg->segno);
+ int i;
+
+ for (i = 0; i < sbi->segs_per_sec; i++, segno++) {
+ if (get_ckpt_valid_blocks(sbi, segno))
+ goto alloc;
+ }
+ } else {
+ if (!get_ckpt_valid_blocks(sbi, curseg->segno))
+ return;
+ }
alloc:
old_segno = curseg->segno;
@@ -2922,10 +2935,15 @@ alloc:
locate_dirty_segment(sbi, old_segno);
}
-void f2fs_allocate_new_segment(struct f2fs_sb_info *sbi, int type)
+static void __allocate_new_section(struct f2fs_sb_info *sbi, int type)
+{
+ __allocate_new_segment(sbi, type, true);
+}
+
+void f2fs_allocate_new_section(struct f2fs_sb_info *sbi, int type)
{
down_write(&SIT_I(sbi)->sentry_lock);
- __allocate_new_segment(sbi, type);
+ __allocate_new_section(sbi, type);
up_write(&SIT_I(sbi)->sentry_lock);
}
@@ -2935,7 +2953,7 @@ void f2fs_allocate_new_segments(struct f2fs_sb_info *sbi)
down_write(&SIT_I(sbi)->sentry_lock);
for (i = CURSEG_HOT_DATA; i <= CURSEG_COLD_DATA; i++)
- __allocate_new_segment(sbi, i);
+ __allocate_new_segment(sbi, i, false);
up_write(&SIT_I(sbi)->sentry_lock);
}
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 88f2cfc5fa90326edb569b4a81bb38ed4dcd3108 ]
In the case of expanding pinned file, map.m_lblk and map.m_len
will update in each round of section allocation, so in error
path, last i_size will be calculated with wrong m_lblk and m_len,
fix it.
Fixes: f5a53edcf01e ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/file.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index e926770f89c5..9f857e5709b6 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1616,9 +1616,10 @@ static int expand_inode_data(struct inode *inode, loff_t offset,
struct f2fs_map_blocks map = { .m_next_pgofs = NULL,
.m_next_extent = NULL, .m_seg_type = NO_CHECK_TYPE,
.m_may_create = true };
- pgoff_t pg_end;
+ pgoff_t pg_start, pg_end;
loff_t new_size = i_size_read(inode);
loff_t off_end;
+ block_t expanded = 0;
int err;
err = inode_newsize_ok(inode, (len + offset));
@@ -1631,11 +1632,12 @@ static int expand_inode_data(struct inode *inode, loff_t offset,
f2fs_balance_fs(sbi, true);
+ pg_start = ((unsigned long long)offset) >> PAGE_SHIFT;
pg_end = ((unsigned long long)offset + len) >> PAGE_SHIFT;
off_end = (offset + len) & (PAGE_SIZE - 1);
- map.m_lblk = ((unsigned long long)offset) >> PAGE_SHIFT;
- map.m_len = pg_end - map.m_lblk;
+ map.m_lblk = pg_start;
+ map.m_len = pg_end - pg_start;
if (off_end)
map.m_len++;
@@ -1645,7 +1647,6 @@ static int expand_inode_data(struct inode *inode, loff_t offset,
if (f2fs_is_pinned_file(inode)) {
block_t sec_blks = BLKS_PER_SEC(sbi);
block_t sec_len = roundup(map.m_len, sec_blks);
- block_t done = 0;
map.m_len = sec_blks;
next_alloc:
@@ -1653,10 +1654,8 @@ next_alloc:
GET_SEC_FROM_SEG(sbi, overprovision_segments(sbi)))) {
down_write(&sbi->gc_lock);
err = f2fs_gc(sbi, true, false, false, NULL_SEGNO);
- if (err && err != -ENODATA && err != -EAGAIN) {
- map.m_len = done;
+ if (err && err != -ENODATA && err != -EAGAIN)
goto out_err;
- }
}
down_write(&sbi->pin_sem);
@@ -1670,24 +1669,25 @@ next_alloc:
up_write(&sbi->pin_sem);
- done += map.m_len;
+ expanded += map.m_len;
sec_len -= map.m_len;
map.m_lblk += map.m_len;
if (!err && sec_len)
goto next_alloc;
- map.m_len = done;
+ map.m_len = expanded;
} else {
err = f2fs_map_blocks(inode, &map, 1, F2FS_GET_BLOCK_PRE_AIO);
+ expanded = map.m_len;
}
out_err:
if (err) {
pgoff_t last_off;
- if (!map.m_len)
+ if (!expanded)
return err;
- last_off = map.m_lblk + map.m_len - 1;
+ last_off = pg_start + expanded - 1;
/* update new size to the failed position */
new_size = (last_off == pg_end) ? offset + len :
--
2.30.2
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 959a48d0eac0321948c9f3d1707ba22c100e92d5 ]
pci_epc_get_first_free_bar() uses only "reserved_bar" member in
epc_features to get the first unreserved BAR. However if the reserved BAR
is also a 64-bit BAR, then the next BAR shouldn't be returned (since 64-bit
BAR uses two BARs).
Make pci_epc_get_first_free_bar() take into account 64 bit BAR while
returning the first free unreserved BAR.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/pci-epc-core.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index cadd3db0cbb0..25e57672e1a1 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -93,12 +93,20 @@ EXPORT_SYMBOL_GPL(pci_epc_get);
unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
*epc_features)
{
- int free_bar;
+ unsigned long free_bar;
if (!epc_features)
return 0;
- free_bar = ffz(epc_features->reserved_bar);
+ /* Find if the reserved BAR is also a 64-bit BAR */
+ free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit;
+
+ /* Set the adjacent bit if the reserved BAR is also a 64-bit BAR */
+ free_bar <<= 1;
+ free_bar |= epc_features->reserved_bar;
+
+ /* Now find the free BAR */
+ free_bar = ffz(free_bar);
if (free_bar > 5)
return 0;
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 7dede88659df38f96128ab3922c50dde2d29c574 ]
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.
However, after commit 803e74be04b3 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.
Fixes: 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/f2fs.h | 2 +-
fs/f2fs/file.c | 9 +++++----
fs/f2fs/gc.c | 21 ++++++++++++---------
fs/f2fs/segment.c | 2 +-
fs/f2fs/super.c | 2 +-
5 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index af294eb23283..f116150e45e3 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3449,7 +3449,7 @@ void f2fs_destroy_post_read_wq(struct f2fs_sb_info *sbi);
int f2fs_start_gc_thread(struct f2fs_sb_info *sbi);
void f2fs_stop_gc_thread(struct f2fs_sb_info *sbi);
block_t f2fs_start_bidx_of_node(unsigned int node_ofs, struct inode *inode);
-int f2fs_gc(struct f2fs_sb_info *sbi, bool sync, bool background,
+int f2fs_gc(struct f2fs_sb_info *sbi, bool sync, bool background, bool force,
unsigned int segno);
void f2fs_build_gc_manager(struct f2fs_sb_info *sbi);
int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count);
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6850fb2081c8..df963686c4dc 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1655,7 +1655,7 @@ next_alloc:
if (has_not_enough_free_secs(sbi, 0,
GET_SEC_FROM_SEG(sbi, overprovision_segments(sbi)))) {
down_write(&sbi->gc_lock);
- err = f2fs_gc(sbi, true, false, NULL_SEGNO);
+ err = f2fs_gc(sbi, true, false, false, NULL_SEGNO);
if (err && err != -ENODATA && err != -EAGAIN)
goto out_err;
}
@@ -2490,7 +2490,7 @@ static int f2fs_ioc_gc(struct file *filp, unsigned long arg)
down_write(&sbi->gc_lock);
}
- ret = f2fs_gc(sbi, sync, true, NULL_SEGNO);
+ ret = f2fs_gc(sbi, sync, true, false, NULL_SEGNO);
out:
mnt_drop_write_file(filp);
return ret;
@@ -2526,7 +2526,8 @@ do_more:
down_write(&sbi->gc_lock);
}
- ret = f2fs_gc(sbi, range->sync, true, GET_SEGNO(sbi, range->start));
+ ret = f2fs_gc(sbi, range->sync, true, false,
+ GET_SEGNO(sbi, range->start));
if (ret) {
if (ret == -EBUSY)
ret = -EAGAIN;
@@ -2985,7 +2986,7 @@ static int f2fs_ioc_flush_device(struct file *filp, unsigned long arg)
sm->last_victim[GC_CB] = end_segno + 1;
sm->last_victim[GC_GREEDY] = end_segno + 1;
sm->last_victim[ALLOC_NEXT] = end_segno + 1;
- ret = f2fs_gc(sbi, true, true, start_segno);
+ ret = f2fs_gc(sbi, true, true, true, start_segno);
if (ret == -EAGAIN)
ret = 0;
else if (ret < 0)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 05641a1e36cc..1e602d0f611f 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -112,7 +112,7 @@ do_gc:
sync_mode = F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_SYNC;
/* if return value is not zero, no victim was selected */
- if (f2fs_gc(sbi, sync_mode, true, NULL_SEGNO))
+ if (f2fs_gc(sbi, sync_mode, true, false, NULL_SEGNO))
wait_ms = gc_th->no_gc_sleep_time;
trace_f2fs_background_gc(sbi->sb, wait_ms,
@@ -1356,7 +1356,8 @@ out:
* the victim data block is ignored.
*/
static int gc_data_segment(struct f2fs_sb_info *sbi, struct f2fs_summary *sum,
- struct gc_inode_list *gc_list, unsigned int segno, int gc_type)
+ struct gc_inode_list *gc_list, unsigned int segno, int gc_type,
+ bool force_migrate)
{
struct super_block *sb = sbi->sb;
struct f2fs_summary *entry;
@@ -1385,8 +1386,8 @@ next_step:
* race condition along with SSR block allocation.
*/
if ((gc_type == BG_GC && has_not_enough_free_secs(sbi, 0, 0)) ||
- get_valid_blocks(sbi, segno, true) ==
- BLKS_PER_SEC(sbi))
+ (!force_migrate && get_valid_blocks(sbi, segno, true) ==
+ BLKS_PER_SEC(sbi)))
return submitted;
if (check_valid_map(sbi, segno, off) == 0)
@@ -1521,7 +1522,8 @@ static int __get_victim(struct f2fs_sb_info *sbi, unsigned int *victim,
static int do_garbage_collect(struct f2fs_sb_info *sbi,
unsigned int start_segno,
- struct gc_inode_list *gc_list, int gc_type)
+ struct gc_inode_list *gc_list, int gc_type,
+ bool force_migrate)
{
struct page *sum_page;
struct f2fs_summary_block *sum;
@@ -1608,7 +1610,8 @@ static int do_garbage_collect(struct f2fs_sb_info *sbi,
gc_type);
else
submitted += gc_data_segment(sbi, sum->entries, gc_list,
- segno, gc_type);
+ segno, gc_type,
+ force_migrate);
stat_inc_seg_count(sbi, type, gc_type);
migrated++;
@@ -1636,7 +1639,7 @@ skip:
}
int f2fs_gc(struct f2fs_sb_info *sbi, bool sync,
- bool background, unsigned int segno)
+ bool background, bool force, unsigned int segno)
{
int gc_type = sync ? FG_GC : BG_GC;
int sec_freed = 0, seg_freed = 0, total_freed = 0;
@@ -1698,7 +1701,7 @@ gc_more:
if (ret)
goto stop;
- seg_freed = do_garbage_collect(sbi, segno, &gc_list, gc_type);
+ seg_freed = do_garbage_collect(sbi, segno, &gc_list, gc_type, force);
if (gc_type == FG_GC &&
seg_freed == f2fs_usable_segs_in_sec(sbi, segno))
sec_freed++;
@@ -1837,7 +1840,7 @@ static int free_segment_range(struct f2fs_sb_info *sbi,
.iroot = RADIX_TREE_INIT(gc_list.iroot, GFP_NOFS),
};
- do_garbage_collect(sbi, segno, &gc_list, FG_GC);
+ do_garbage_collect(sbi, segno, &gc_list, FG_GC, true);
put_gc_inode(&gc_list);
if (!gc_only && get_valid_blocks(sbi, segno, true)) {
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index f2a4265318f5..f9e7280c39d9 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -507,7 +507,7 @@ void f2fs_balance_fs(struct f2fs_sb_info *sbi, bool need)
*/
if (has_not_enough_free_secs(sbi, 0, 0)) {
down_write(&sbi->gc_lock);
- f2fs_gc(sbi, false, false, NULL_SEGNO);
+ f2fs_gc(sbi, false, false, false, NULL_SEGNO);
}
}
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 4fffbef216af..abc469dd9aea 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1723,7 +1723,7 @@ static int f2fs_disable_checkpoint(struct f2fs_sb_info *sbi)
while (!f2fs_time_over(sbi, DISABLE_TIME)) {
down_write(&sbi->gc_lock);
- err = f2fs_gc(sbi, true, false, NULL_SEGNO);
+ err = f2fs_gc(sbi, true, false, false, NULL_SEGNO);
if (err == -ENODATA) {
err = 0;
break;
--
2.30.2
From: Pali Rohár <[email protected]>
[ Upstream commit 1e83130f01b04c16579ed5a5e03d729bcffc4c5d ]
IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.
Link: https://lore.kernel.org/r/[email protected]
Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Acked-by: Ray Jui <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-iproc-msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
index 908475d27e0e..eede4e8f3f75 100644
--- a/drivers/pci/controller/pcie-iproc-msi.c
+++ b/drivers/pci/controller/pcie-iproc-msi.c
@@ -271,7 +271,7 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
NULL, NULL);
}
- return hwirq;
+ return 0;
}
static void iproc_msi_irq_domain_free(struct irq_domain *domain,
--
2.30.2
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit c99e755a4a4c165cad6effb39faffd0f3377c02d ]
In pci_scan_device(), if pci_setup_device() fails for any reason, the code
will not release device's of_node by calling pci_release_of_node(). Fix
that by calling the release function.
Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4289030b0fff..ece90a23936d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2367,6 +2367,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
pci_set_of_node(dev);
if (pci_setup_device(dev)) {
+ pci_release_of_node(dev);
pci_bus_put(dev->bus);
kfree(dev);
return NULL;
--
2.30.2
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit fa8fef0e104a23efe568b835d9e7e188d1d97610 ]
Add an API to get the next unreserved BAR starting from a given BAR number
that can be used by the endpoint function.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/pci-epc-core.c | 26 ++++++++++++++++++++++----
include/linux/pci-epc.h | 2 ++
2 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index 25e57672e1a1..1afe5d9afb0d 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -87,17 +87,36 @@ EXPORT_SYMBOL_GPL(pci_epc_get);
* pci_epc_get_first_free_bar() - helper to get first unreserved BAR
* @epc_features: pci_epc_features structure that holds the reserved bar bitmap
*
- * Invoke to get the first unreserved BAR that can be used for endpoint
+ * Invoke to get the first unreserved BAR that can be used by the endpoint
* function. For any incorrect value in reserved_bar return '0'.
*/
unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
*epc_features)
+{
+ return pci_epc_get_next_free_bar(epc_features, BAR_0);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
+
+/**
+ * pci_epc_get_next_free_bar() - helper to get unreserved BAR starting from @bar
+ * @epc_features: pci_epc_features structure that holds the reserved bar bitmap
+ * @bar: the starting BAR number from where unreserved BAR should be searched
+ *
+ * Invoke to get the next unreserved BAR starting from @bar that can be used
+ * for endpoint function. For any incorrect value in reserved_bar return '0'.
+ */
+unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features
+ *epc_features, enum pci_barno bar)
{
unsigned long free_bar;
if (!epc_features)
return 0;
+ /* If 'bar - 1' is a 64-bit BAR, move to the next BAR */
+ if ((epc_features->bar_fixed_64bit << 1) & 1 << bar)
+ bar++;
+
/* Find if the reserved BAR is also a 64-bit BAR */
free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit;
@@ -105,14 +124,13 @@ unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
free_bar <<= 1;
free_bar |= epc_features->reserved_bar;
- /* Now find the free BAR */
- free_bar = ffz(free_bar);
+ free_bar = find_next_zero_bit(&free_bar, 6, bar);
if (free_bar > 5)
return 0;
return free_bar;
}
-EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
+EXPORT_SYMBOL_GPL(pci_epc_get_next_free_bar);
/**
* pci_epc_get_features() - get the features supported by EPC
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index cc66bec8be90..cfe9b427e6b7 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -203,6 +203,8 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
u8 func_no);
unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
*epc_features);
+unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features
+ *epc_features, enum pci_barno bar);
struct pci_epc *pci_epc_get(const char *epc_name);
void pci_epc_put(struct pci_epc *epc);
--
2.30.2
From: Petr Mladek <[email protected]>
[ Upstream commit 1bc503cb4a2638fb1c57801a7796aca57845ce63 ]
The softlockup detector does some gymnastic with the variable
soft_watchdog_warn. It was added by the commit 58687acba59266735ad
("lockup_detector: Combine nmi_watchdog and softlockup detector").
The purpose is not completely clear. There are the following clues. They
describe the situation how it looked after the above mentioned commit:
1. The variable was checked with a comment "only warn once".
2. The variable was set when softlockup was reported. It was cleared
only when the CPU was not longer in the softlockup state.
3. watchdog_touch_ts was not explicitly updated when the softlockup
was reported. Without this variable, the report would normally
be printed again during every following watchdog_timer_fn()
invocation.
The logic has got even more tangled up by the commit ed235875e2ca98
("kernel/watchdog.c: print traces for all cpus on lockup detection").
After this commit, soft_watchdog_warn is set only when
softlockup_all_cpu_backtrace is enabled. But multiple reports from all
CPUs are prevented by a new variable soft_lockup_nmi_warn.
Conclusion:
The variable probably never worked as intended. In each case, it has not
worked last many years because the softlockup was reported repeatedly
after the full period defined by watchdog_thresh.
The reason is that watchdog gets touched in many known slow paths, for
example, in printk_stack_address(). This code is called also when
printing the softlockup report. It means that the watchdog timestamp gets
updated after each report.
Solution:
Simply remove the logic. People want the periodic report anyway.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vincent Whitchurch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watchdog.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 7776d53a015c..122e272ad7f2 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -172,7 +172,6 @@ static u64 __read_mostly sample_period;
static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
static DEFINE_PER_CPU(bool, softlockup_touch_sync);
-static DEFINE_PER_CPU(bool, soft_watchdog_warn);
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
static unsigned long soft_lockup_nmi_warn;
@@ -394,19 +393,12 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
if (kvm_check_and_clear_guest_paused())
return HRTIMER_RESTART;
- /* only warn once */
- if (__this_cpu_read(soft_watchdog_warn) == true)
- return HRTIMER_RESTART;
-
if (softlockup_all_cpu_backtrace) {
/* Prevent multiple soft-lockup reports if one cpu is already
* engaged in dumping cpu back traces
*/
- if (test_and_set_bit(0, &soft_lockup_nmi_warn)) {
- /* Someone else will report us. Let's give up */
- __this_cpu_write(soft_watchdog_warn, true);
+ if (test_and_set_bit(0, &soft_lockup_nmi_warn))
return HRTIMER_RESTART;
- }
}
/* Start period for the next softlockup warning. */
@@ -436,9 +428,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
if (softlockup_panic)
panic("softlockup: hung tasks");
- __this_cpu_write(soft_watchdog_warn, true);
- } else
- __this_cpu_write(soft_watchdog_warn, false);
+ }
return HRTIMER_RESTART;
}
--
2.30.2
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 0e27aeccfa3d1bab7c6a29fb8e6fcedbad7b09a8 ]
Modify pci_epc_get_next_free_bar() and pci_epc_get_first_free_bar() to
return error values if there are no free BARs available.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 2 ++
drivers/pci/endpoint/pci-epc-core.c | 12 ++++++------
include/linux/pci-epc.h | 8 ++++----
include/linux/pci-epf.h | 1 +
4 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index e4e51d884553..7a1f3abfde48 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -834,6 +834,8 @@ static int pci_epf_test_bind(struct pci_epf *epf)
linkup_notifier = epc_features->linkup_notifier;
core_init_notifier = epc_features->core_init_notifier;
test_reg_bar = pci_epc_get_first_free_bar(epc_features);
+ if (test_reg_bar < 0)
+ return -EINVAL;
pci_epf_configure_bar(epf, epc_features);
}
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index 1afe5d9afb0d..ea7e7465ce7a 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -90,8 +90,8 @@ EXPORT_SYMBOL_GPL(pci_epc_get);
* Invoke to get the first unreserved BAR that can be used by the endpoint
* function. For any incorrect value in reserved_bar return '0'.
*/
-unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
- *epc_features)
+enum pci_barno
+pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features)
{
return pci_epc_get_next_free_bar(epc_features, BAR_0);
}
@@ -105,13 +105,13 @@ EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar);
* Invoke to get the next unreserved BAR starting from @bar that can be used
* for endpoint function. For any incorrect value in reserved_bar return '0'.
*/
-unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features
- *epc_features, enum pci_barno bar)
+enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
+ *epc_features, enum pci_barno bar)
{
unsigned long free_bar;
if (!epc_features)
- return 0;
+ return BAR_0;
/* If 'bar - 1' is a 64-bit BAR, move to the next BAR */
if ((epc_features->bar_fixed_64bit << 1) & 1 << bar)
@@ -126,7 +126,7 @@ unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features
free_bar = find_next_zero_bit(&free_bar, 6, bar);
if (free_bar > 5)
- return 0;
+ return NO_BAR;
return free_bar;
}
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index cfe9b427e6b7..88d311bad984 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -201,10 +201,10 @@ int pci_epc_start(struct pci_epc *epc);
void pci_epc_stop(struct pci_epc *epc);
const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
u8 func_no);
-unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features
- *epc_features);
-unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features
- *epc_features, enum pci_barno bar);
+enum pci_barno
+pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features);
+enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
+ *epc_features, enum pci_barno bar);
struct pci_epc *pci_epc_get(const char *epc_name);
void pci_epc_put(struct pci_epc *epc);
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 6644ff3b0702..fa3aca43eb19 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -21,6 +21,7 @@ enum pci_notify_event {
};
enum pci_barno {
+ NO_BAR = -1,
BAR_0,
BAR_1,
BAR_2,
--
2.30.2
From: Shradha Todi <[email protected]>
[ Upstream commit 6613bc2301ba291a1c5a90e1dc24cf3edf223c03 ]
get_features ops of pci_epc_ops may return NULL, causing NULL pointer
dereference in pci_epf_test_alloc_space function. Let us add a check for
pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid
any such NULL pointer dereference and return -ENOTSUPP in case
pci_epc_feature is not found.
When the patch is not applied and EPC features is not implemented in the
platform driver, we see the following dump due to kernel NULL pointer
dereference.
Call trace:
pci_epf_test_bind+0xf4/0x388
pci_epf_bind+0x3c/0x80
pci_epc_epf_link+0xa8/0xcc
configfs_symlink+0x1a4/0x48c
vfs_symlink+0x104/0x184
do_symlinkat+0x80/0xd4
__arm64_sys_symlinkat+0x1c/0x24
el0_svc_common.constprop.3+0xb8/0x170
el0_svc_handler+0x70/0x88
el0_svc+0x8/0x640
Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400)
---[ end trace a438e3c5a24f9df0 ]---
Link: https://lore.kernel.org/r/[email protected]
Fixes: 2c04c5b8eef79 ("PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features")
Signed-off-by: Sriram Dash <[email protected]>
Signed-off-by: Shradha Todi <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Pankaj Dubey <[email protected]>
Reviewed-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 7a1f3abfde48..5f6ce120a67a 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -830,15 +830,18 @@ static int pci_epf_test_bind(struct pci_epf *epf)
return -EINVAL;
epc_features = pci_epc_get_features(epc, epf->func_no);
- if (epc_features) {
- linkup_notifier = epc_features->linkup_notifier;
- core_init_notifier = epc_features->core_init_notifier;
- test_reg_bar = pci_epc_get_first_free_bar(epc_features);
- if (test_reg_bar < 0)
- return -EINVAL;
- pci_epf_configure_bar(epf, epc_features);
+ if (!epc_features) {
+ dev_err(&epf->dev, "epc_features not implemented\n");
+ return -EOPNOTSUPP;
}
+ linkup_notifier = epc_features->linkup_notifier;
+ core_init_notifier = epc_features->core_init_notifier;
+ test_reg_bar = pci_epc_get_first_free_bar(epc_features);
+ if (test_reg_bar < 0)
+ return -EINVAL;
+ pci_epf_configure_bar(epf, epc_features);
+
epf_test->test_reg_bar = test_reg_bar;
epf_test->epc_features = epc_features;
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 61461fc921b756ae16e64243f72af2bfc2e620db ]
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/f2fs.h | 1 +
fs/f2fs/gc.c | 28 ++++++++++++++++++++--------
fs/f2fs/segment.c | 36 +++++++++++++++++++++---------------
fs/f2fs/segment.h | 14 +++++++++++++-
4 files changed, 55 insertions(+), 24 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index c2973a1dead6..036d2a3a2f41 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3282,6 +3282,7 @@ block_t f2fs_get_unusable_blocks(struct f2fs_sb_info *sbi);
int f2fs_disable_cp_again(struct f2fs_sb_info *sbi, block_t unusable);
void f2fs_release_discard_addrs(struct f2fs_sb_info *sbi);
int f2fs_npages_for_summary_flush(struct f2fs_sb_info *sbi, bool for_ra);
+bool f2fs_segment_has_free_slot(struct f2fs_sb_info *sbi, int segno);
void f2fs_init_inmem_curseg(struct f2fs_sb_info *sbi);
void f2fs_save_inmem_curseg(struct f2fs_sb_info *sbi);
void f2fs_restore_inmem_curseg(struct f2fs_sb_info *sbi);
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index e4e8c7257454..9b38cef4d50f 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -392,10 +392,6 @@ static void add_victim_entry(struct f2fs_sb_info *sbi,
if (p->gc_mode == GC_AT &&
get_valid_blocks(sbi, segno, true) == 0)
return;
-
- if (p->alloc_mode == AT_SSR &&
- get_seg_entry(sbi, segno)->ckpt_valid_blocks == 0)
- return;
}
for (i = 0; i < sbi->segs_per_sec; i++)
@@ -728,11 +724,27 @@ retry:
if (sec_usage_check(sbi, secno))
goto next;
+
/* Don't touch checkpointed data */
- if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED) &&
- get_ckpt_valid_blocks(sbi, segno) &&
- p.alloc_mode == LFS))
- goto next;
+ if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
+ if (p.alloc_mode == LFS) {
+ /*
+ * LFS is set to find source section during GC.
+ * The victim should have no checkpointed data.
+ */
+ if (get_ckpt_valid_blocks(sbi, segno, true))
+ goto next;
+ } else {
+ /*
+ * SSR | AT_SSR are set to find target segment
+ * for writes which can be full by checkpointed
+ * and newly written blocks.
+ */
+ if (!f2fs_segment_has_free_slot(sbi, segno))
+ goto next;
+ }
+ }
+
if (gc_type == BG_GC && test_bit(secno, dirty_i->victim_secmap))
goto next;
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index d696d4713333..661b891aa1ca 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -871,7 +871,7 @@ static void locate_dirty_segment(struct f2fs_sb_info *sbi, unsigned int segno)
mutex_lock(&dirty_i->seglist_lock);
valid_blocks = get_valid_blocks(sbi, segno, false);
- ckpt_valid_blocks = get_ckpt_valid_blocks(sbi, segno);
+ ckpt_valid_blocks = get_ckpt_valid_blocks(sbi, segno, false);
if (valid_blocks == 0 && (!is_sbi_flag_set(sbi, SBI_CP_DISABLED) ||
ckpt_valid_blocks == usable_blocks)) {
@@ -956,7 +956,7 @@ static unsigned int get_free_segment(struct f2fs_sb_info *sbi)
for_each_set_bit(segno, dirty_i->dirty_segmap[DIRTY], MAIN_SEGS(sbi)) {
if (get_valid_blocks(sbi, segno, false))
continue;
- if (get_ckpt_valid_blocks(sbi, segno))
+ if (get_ckpt_valid_blocks(sbi, segno, false))
continue;
mutex_unlock(&dirty_i->seglist_lock);
return segno;
@@ -2646,6 +2646,23 @@ static void __refresh_next_blkoff(struct f2fs_sb_info *sbi,
seg->next_blkoff++;
}
+bool f2fs_segment_has_free_slot(struct f2fs_sb_info *sbi, int segno)
+{
+ struct seg_entry *se = get_seg_entry(sbi, segno);
+ int entries = SIT_VBLOCK_MAP_SIZE / sizeof(unsigned long);
+ unsigned long *target_map = SIT_I(sbi)->tmp_map;
+ unsigned long *ckpt_map = (unsigned long *)se->ckpt_valid_map;
+ unsigned long *cur_map = (unsigned long *)se->cur_valid_map;
+ int i, pos;
+
+ for (i = 0; i < entries; i++)
+ target_map[i] = ckpt_map[i] | cur_map[i];
+
+ pos = __find_rev_next_zero_bit(target_map, sbi->blocks_per_seg, 0);
+
+ return pos < sbi->blocks_per_seg;
+}
+
/*
* This function always allocates a used segment(from dirty seglist) by SSR
* manner, so it should recover the existing segment information of valid blocks
@@ -2916,19 +2933,8 @@ static void __allocate_new_segment(struct f2fs_sb_info *sbi, int type,
get_valid_blocks(sbi, curseg->segno, new_sec))
goto alloc;
- if (new_sec) {
- unsigned int segno = START_SEGNO(curseg->segno);
- int i;
-
- for (i = 0; i < sbi->segs_per_sec; i++, segno++) {
- if (get_ckpt_valid_blocks(sbi, segno))
- goto alloc;
- }
- } else {
- if (!get_ckpt_valid_blocks(sbi, curseg->segno))
- return;
- }
-
+ if (!get_ckpt_valid_blocks(sbi, curseg->segno, new_sec))
+ return;
alloc:
old_segno = curseg->segno;
SIT_I(sbi)->s_ops->allocate_segment(sbi, type, true);
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 229814b4f4a6..1bf33fc27b8f 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -361,8 +361,20 @@ static inline unsigned int get_valid_blocks(struct f2fs_sb_info *sbi,
}
static inline unsigned int get_ckpt_valid_blocks(struct f2fs_sb_info *sbi,
- unsigned int segno)
+ unsigned int segno, bool use_section)
{
+ if (use_section && __is_large_section(sbi)) {
+ unsigned int start_segno = START_SEGNO(segno);
+ unsigned int blocks = 0;
+ int i;
+
+ for (i = 0; i < sbi->segs_per_sec; i++, start_segno++) {
+ struct seg_entry *se = get_seg_entry(sbi, start_segno);
+
+ blocks += se->ckpt_valid_blocks;
+ }
+ return blocks;
+ }
return get_seg_entry(sbi, segno)->ckpt_valid_blocks;
}
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 823d13e12b6cbaef2f6e5d63c648643e7bc094dd ]
In order to avoid race with f2fs_do_replace_block().
Fixes: f5a53edcf01e ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 661b891aa1ca..ddfc3daebe9b 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2948,19 +2948,23 @@ static void __allocate_new_section(struct f2fs_sb_info *sbi, int type)
void f2fs_allocate_new_section(struct f2fs_sb_info *sbi, int type)
{
+ down_read(&SM_I(sbi)->curseg_lock);
down_write(&SIT_I(sbi)->sentry_lock);
__allocate_new_section(sbi, type);
up_write(&SIT_I(sbi)->sentry_lock);
+ up_read(&SM_I(sbi)->curseg_lock);
}
void f2fs_allocate_new_segments(struct f2fs_sb_info *sbi)
{
int i;
+ down_read(&SM_I(sbi)->curseg_lock);
down_write(&SIT_I(sbi)->sentry_lock);
for (i = CURSEG_HOT_DATA; i <= CURSEG_COLD_DATA; i++)
__allocate_new_segment(sbi, i, false);
up_write(&SIT_I(sbi)->sentry_lock);
+ up_read(&SM_I(sbi)->curseg_lock);
}
static const struct segment_allocation default_salloc_ops = {
--
2.30.2
From: Petr Mladek <[email protected]>
[ Upstream commit 9f113bf760ca90d709f8f89a733d10abb1f04a83 ]
Any parallel softlockup reports are skipped when one CPU is already
printing backtraces from all CPUs.
The exclusive rights are synchronized using one bit in
soft_lockup_nmi_warn. There is also one memory barrier that does not make
much sense.
Use two barriers on the right location to prevent mixing two reports.
[[email protected]: use bit lock operations to prevent multiple soft-lockup reports]
Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vincent Whitchurch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watchdog.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 122e272ad7f2..01bf977090dc 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -393,11 +393,12 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
if (kvm_check_and_clear_guest_paused())
return HRTIMER_RESTART;
+ /*
+ * Prevent multiple soft-lockup reports if one cpu is already
+ * engaged in dumping all cpu back traces.
+ */
if (softlockup_all_cpu_backtrace) {
- /* Prevent multiple soft-lockup reports if one cpu is already
- * engaged in dumping cpu back traces
- */
- if (test_and_set_bit(0, &soft_lockup_nmi_warn))
+ if (test_and_set_bit_lock(0, &soft_lockup_nmi_warn))
return HRTIMER_RESTART;
}
@@ -415,14 +416,8 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
dump_stack();
if (softlockup_all_cpu_backtrace) {
- /* Avoid generating two back traces for current
- * given that one is already made above
- */
trigger_allbutself_cpu_backtrace();
-
- clear_bit(0, &soft_lockup_nmi_warn);
- /* Barrier to sync with other cpus */
- smp_mb__after_atomic();
+ clear_bit_unlock(0, &soft_lockup_nmi_warn);
}
add_taint(TAINT_SOFTLOCKUP, LOCKDEP_STILL_OK);
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 332d1a0373be32a3a3c152756bca45ff4f4e11b5 ]
As currently set, the calls to nfs4_bitmask_adjust() will end up
overwriting the contents of the nfs_server cache_consistency_bitmask
field.
The intention here should be to modify a private copy of that mask in
the close/delegreturn/write arguments.
Fixes: 76bd5c016ef4 ("NFSv4: make cache consistency bitmask dynamic")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 56 +++++++++++++++++++++++++----------------
include/linux/nfs_xdr.h | 11 +++++---
2 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 15ac6b6893e7..06b70de0cc0d 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -112,9 +112,10 @@ static int nfs41_test_stateid(struct nfs_server *, nfs4_stateid *,
static int nfs41_free_stateid(struct nfs_server *, const nfs4_stateid *,
const struct cred *, bool);
#endif
-static void nfs4_bitmask_adjust(__u32 *bitmask, struct inode *inode,
- struct nfs_server *server,
- struct nfs4_label *label);
+static void nfs4_bitmask_set(__u32 bitmask[NFS4_BITMASK_SZ],
+ const __u32 *src, struct inode *inode,
+ struct nfs_server *server,
+ struct nfs4_label *label);
#ifdef CONFIG_NFS_V4_SECURITY_LABEL
static inline struct nfs4_label *
@@ -3596,6 +3597,7 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
struct nfs4_closedata *calldata = data;
struct nfs4_state *state = calldata->state;
struct inode *inode = calldata->inode;
+ struct nfs_server *server = NFS_SERVER(inode);
struct pnfs_layout_hdr *lo;
bool is_rdonly, is_wronly, is_rdwr;
int call_close = 0;
@@ -3652,8 +3654,10 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
if (calldata->arg.fmode == 0 || calldata->arg.fmode == FMODE_READ) {
/* Close-to-open cache consistency revalidation */
if (!nfs4_have_delegation(inode, FMODE_READ)) {
- calldata->arg.bitmask = NFS_SERVER(inode)->cache_consistency_bitmask;
- nfs4_bitmask_adjust(calldata->arg.bitmask, inode, NFS_SERVER(inode), NULL);
+ nfs4_bitmask_set(calldata->arg.bitmask_store,
+ server->cache_consistency_bitmask,
+ inode, server, NULL);
+ calldata->arg.bitmask = calldata->arg.bitmask_store;
} else
calldata->arg.bitmask = NULL;
}
@@ -5418,19 +5422,17 @@ bool nfs4_write_need_cache_consistency_data(struct nfs_pgio_header *hdr)
return nfs4_have_delegation(hdr->inode, FMODE_READ) == 0;
}
-static void nfs4_bitmask_adjust(__u32 *bitmask, struct inode *inode,
- struct nfs_server *server,
- struct nfs4_label *label)
+static void nfs4_bitmask_set(__u32 bitmask[NFS4_BITMASK_SZ], const __u32 *src,
+ struct inode *inode, struct nfs_server *server,
+ struct nfs4_label *label)
{
-
unsigned long cache_validity = READ_ONCE(NFS_I(inode)->cache_validity);
+ unsigned int i;
- if ((cache_validity & NFS_INO_INVALID_DATA) ||
- (cache_validity & NFS_INO_REVAL_PAGECACHE) ||
- (cache_validity & NFS_INO_REVAL_FORCED) ||
- (cache_validity & NFS_INO_INVALID_OTHER))
- nfs4_bitmap_copy_adjust(bitmask, nfs4_bitmask(server, label), inode);
+ memcpy(bitmask, src, sizeof(*bitmask) * NFS4_BITMASK_SZ);
+ if (cache_validity & (NFS_INO_INVALID_CHANGE | NFS_INO_REVAL_PAGECACHE))
+ bitmask[0] |= FATTR4_WORD0_CHANGE;
if (cache_validity & NFS_INO_INVALID_ATIME)
bitmask[1] |= FATTR4_WORD1_TIME_ACCESS;
if (cache_validity & NFS_INO_INVALID_OTHER)
@@ -5439,16 +5441,22 @@ static void nfs4_bitmask_adjust(__u32 *bitmask, struct inode *inode,
FATTR4_WORD1_NUMLINKS;
if (label && label->len && cache_validity & NFS_INO_INVALID_LABEL)
bitmask[2] |= FATTR4_WORD2_SECURITY_LABEL;
- if (cache_validity & NFS_INO_INVALID_CHANGE)
- bitmask[0] |= FATTR4_WORD0_CHANGE;
if (cache_validity & NFS_INO_INVALID_CTIME)
bitmask[1] |= FATTR4_WORD1_TIME_METADATA;
if (cache_validity & NFS_INO_INVALID_MTIME)
bitmask[1] |= FATTR4_WORD1_TIME_MODIFY;
- if (cache_validity & NFS_INO_INVALID_SIZE)
- bitmask[0] |= FATTR4_WORD0_SIZE;
if (cache_validity & NFS_INO_INVALID_BLOCKS)
bitmask[1] |= FATTR4_WORD1_SPACE_USED;
+
+ if (nfs4_have_delegation(inode, FMODE_READ) &&
+ !(cache_validity & NFS_INO_REVAL_FORCED))
+ bitmask[0] &= ~FATTR4_WORD0_SIZE;
+ else if (cache_validity &
+ (NFS_INO_INVALID_SIZE | NFS_INO_REVAL_PAGECACHE))
+ bitmask[0] |= FATTR4_WORD0_SIZE;
+
+ for (i = 0; i < NFS4_BITMASK_SZ; i++)
+ bitmask[i] &= server->attr_bitmask[i];
}
static void nfs4_proc_write_setup(struct nfs_pgio_header *hdr,
@@ -5461,8 +5469,10 @@ static void nfs4_proc_write_setup(struct nfs_pgio_header *hdr,
hdr->args.bitmask = NULL;
hdr->res.fattr = NULL;
} else {
- hdr->args.bitmask = server->cache_consistency_bitmask;
- nfs4_bitmask_adjust(hdr->args.bitmask, hdr->inode, server, NULL);
+ nfs4_bitmask_set(hdr->args.bitmask_store,
+ server->cache_consistency_bitmask,
+ hdr->inode, server, NULL);
+ hdr->args.bitmask = hdr->args.bitmask_store;
}
if (!hdr->pgio_done_cb)
@@ -6504,8 +6514,10 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
data->args.fhandle = &data->fh;
data->args.stateid = &data->stateid;
- data->args.bitmask = server->cache_consistency_bitmask;
- nfs4_bitmask_adjust(data->args.bitmask, inode, server, NULL);
+ nfs4_bitmask_set(data->args.bitmask_store,
+ server->cache_consistency_bitmask, inode, server,
+ NULL);
+ data->args.bitmask = data->args.bitmask_store;
nfs_copy_fh(&data->fh, NFS_FH(inode));
nfs4_stateid_copy(&data->stateid, stateid);
data->res.fattr = &data->fattr;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index d63cb862d58e..5491ad5f48a9 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -15,6 +15,8 @@
#define NFS_DEF_FILE_IO_SIZE (4096U)
#define NFS_MIN_FILE_IO_SIZE (1024U)
+#define NFS_BITMASK_SZ 3
+
struct nfs4_string {
unsigned int len;
char *data;
@@ -525,7 +527,8 @@ struct nfs_closeargs {
struct nfs_seqid * seqid;
fmode_t fmode;
u32 share_access;
- u32 * bitmask;
+ const u32 * bitmask;
+ u32 bitmask_store[NFS_BITMASK_SZ];
struct nfs4_layoutreturn_args *lr_args;
};
@@ -608,7 +611,8 @@ struct nfs4_delegreturnargs {
struct nfs4_sequence_args seq_args;
const struct nfs_fh *fhandle;
const nfs4_stateid *stateid;
- u32 * bitmask;
+ const u32 *bitmask;
+ u32 bitmask_store[NFS_BITMASK_SZ];
struct nfs4_layoutreturn_args *lr_args;
};
@@ -648,7 +652,8 @@ struct nfs_pgio_args {
union {
unsigned int replen; /* used by read */
struct {
- u32 * bitmask; /* used by write */
+ const u32 * bitmask; /* used by write */
+ u32 bitmask_store[NFS_BITMASK_SZ]; /* used by write */
enum nfs3_stable_how stable; /* used by write */
};
};
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit e99812e1382f0bfb6149393262bc70645c9f537a ]
We can't use nfs4_fattr_bitmap as a bitmask, because it hasn't been
filtered to represent the attributes supported by the server. Instead,
let's revert to using server->cache_consistency_bitmask after adding in
the missing SPACE_USED attribute.
Fixes: 913eca1aea87 ("NFS: Fallocate should use the nfs4_fattr_bitmap")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 4fc61e3d098d..52d8cc253a2b 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -46,11 +46,12 @@ static int _nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
{
struct inode *inode = file_inode(filep);
struct nfs_server *server = NFS_SERVER(inode);
+ u32 bitmask[3];
struct nfs42_falloc_args args = {
.falloc_fh = NFS_FH(inode),
.falloc_offset = offset,
.falloc_length = len,
- .falloc_bitmask = nfs4_fattr_bitmap,
+ .falloc_bitmask = bitmask,
};
struct nfs42_falloc_res res = {
.falloc_server = server,
@@ -68,6 +69,10 @@ static int _nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
return status;
}
+ memcpy(bitmask, server->cache_consistency_bitmask, sizeof(bitmask));
+ if (server->attr_bitmask[1] & FATTR4_WORD1_SPACE_USED)
+ bitmask[1] |= FATTR4_WORD1_SPACE_USED;
+
res.falloc_fattr = nfs_alloc_fattr();
if (!res.falloc_fattr)
return -ENOMEM;
@@ -75,7 +80,8 @@ static int _nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
status = nfs4_call_sync(server->client, server, msg,
&args.seq_args, &res.seq_res, 0);
if (status == 0)
- status = nfs_post_op_update_inode(inode, res.falloc_fattr);
+ status = nfs_post_op_update_inode_force_wcc(inode,
+ res.falloc_fattr);
kfree(res.falloc_fattr);
return status;
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 26594c6bbb60c6bc87e3762a86ceece57d164c66 ]
When idr_find() returns NULL to intent, no error return code of
qcom_glink_rx_data() is assigned.
To fix this bug, ret is assigned with -ENOENT in this case.
Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rpmsg/qcom_glink_native.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 27a05167c18c..4840886532ff 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -857,6 +857,7 @@ static int qcom_glink_rx_data(struct qcom_glink *glink, size_t avail)
dev_err(glink->dev,
"no intent found for channel %s intent %d",
channel->name, liid);
+ ret = -ENOENT;
goto advance_rx;
}
}
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 99f23783224355e7022ceea9b8d9f62c0fd01bd8 ]
Whether we're allocating or delallocating space, we should flush out the
pending writes in order to avoid races with attribute updates.
Fixes: 1e564d3dbd68 ("NFSv4.2: Fix a race in nfs42_proc_deallocate()")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 52d8cc253a2b..948a4c69687c 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -90,7 +90,8 @@ static int _nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
loff_t offset, loff_t len)
{
- struct nfs_server *server = NFS_SERVER(file_inode(filep));
+ struct inode *inode = file_inode(filep);
+ struct nfs_server *server = NFS_SERVER(inode);
struct nfs4_exception exception = { };
struct nfs_lock_context *lock;
int err;
@@ -99,9 +100,13 @@ static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
if (IS_ERR(lock))
return PTR_ERR(lock);
- exception.inode = file_inode(filep);
+ exception.inode = inode;
exception.state = lock->open_context->state;
+ err = nfs_sync_inode(inode);
+ if (err)
+ goto out;
+
do {
err = _nfs42_proc_fallocate(msg, filep, lock, offset, len);
if (err == -ENOTSUPP) {
@@ -110,7 +115,7 @@ static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
}
err = nfs4_handle_exception(server, err, &exception);
} while (exception.retry);
-
+out:
nfs_put_lock_context(lock);
return err;
}
@@ -148,16 +153,13 @@ int nfs42_proc_deallocate(struct file *filep, loff_t offset, loff_t len)
return -EOPNOTSUPP;
inode_lock(inode);
- err = nfs_sync_inode(inode);
- if (err)
- goto out_unlock;
err = nfs42_proc_fallocate(&msg, filep, offset, len);
if (err == 0)
truncate_pagecache_range(inode, offset, (offset + len) -1);
if (err == -EOPNOTSUPP)
NFS_SERVER(inode)->caps &= ~NFS_CAP_DEALLOCATE;
-out_unlock:
+
inode_unlock(inode);
return err;
}
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 9fdbfad1777cb4638f489eeb62d85432010c0031 ]
We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.
Fixes: f5062003465c ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 43af053f467a..6e2e948f1475 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1642,10 +1642,10 @@ EXPORT_SYMBOL_GPL(_nfs_display_fhandle);
*/
static int nfs_inode_attrs_need_update(const struct inode *inode, const struct nfs_fattr *fattr)
{
- const struct nfs_inode *nfsi = NFS_I(inode);
+ unsigned long attr_gencount = NFS_I(inode)->attr_gencount;
- return ((long)fattr->gencount - (long)nfsi->attr_gencount) > 0 ||
- ((long)nfsi->attr_gencount - (long)nfs_read_attr_generation_counter() > 0);
+ return (long)(fattr->gencount - attr_gencount) > 0 ||
+ (long)(attr_gencount - nfs_read_attr_generation_counter()) > 0;
}
static int nfs_refresh_inode_locked(struct inode *inode, struct nfs_fattr *fattr)
@@ -2074,7 +2074,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
nfsi->attrtimeo_timestamp = now;
}
/* Set the barrier to be more recent than this fattr */
- if ((long)fattr->gencount - (long)nfsi->attr_gencount > 0)
+ if ((long)(fattr->gencount - nfsi->attr_gencount) > 0)
nfsi->attr_gencount = fattr->gencount;
}
--
2.30.2
From: Nikola Livic <[email protected]>
[ Upstream commit ed34695e15aba74f45247f1ee2cf7e09d449f925 ]
We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:
if (fh->size > sizeof(struct nfs_fh))
should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.
struct nfs_fh {
unsigned short size;
unsigned char data[NFS_MAXFHSIZE];
}
but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination. The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index fd0eda328943..a8a02081942d 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -106,7 +106,7 @@ static int decode_nfs_fh(struct xdr_stream *xdr, struct nfs_fh *fh)
if (unlikely(!p))
return -ENOBUFS;
fh->size = be32_to_cpup(p++);
- if (fh->size > sizeof(struct nfs_fh)) {
+ if (fh->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS flexfiles: Too big fh received %d\n",
fh->size);
return -EOVERFLOW;
--
2.30.2
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 73f5c88f521a630ea1628beb9c2d48a2e777a419 ]
Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.
Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 948a4c69687c..4ebcd9dd1535 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -665,7 +665,10 @@ static loff_t _nfs42_proc_llseek(struct file *filep,
if (status)
return status;
- return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
+ if (whence == SEEK_DATA && res.sr_eof)
+ return -NFS4ERR_NXIO;
+ else
+ return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
}
loff_t nfs42_proc_llseek(struct file *filep, loff_t offset, int whence)
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit acaef7981a218813e3617edb9c01837808de063c ]
Add the missing destroy_workqueue() before return from
pci_epf_test_init() in the error handling case and add
destroy_workqueue() in pci_epf_test_exit().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 349e7a85b25fa ("PCI: endpoint: functions: Add an EP function to test PCI")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 5f6ce120a67a..d41570715dc7 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -922,6 +922,7 @@ static int __init pci_epf_test_init(void)
ret = pci_epf_register_driver(&test_driver);
if (ret) {
+ destroy_workqueue(kpcitest_workqueue);
pr_err("Failed to register pci epf test driver --> %d\n", ret);
return ret;
}
@@ -932,6 +933,8 @@ module_init(pci_epf_test_init);
static void __exit pci_epf_test_exit(void)
{
+ if (kpcitest_workqueue)
+ destroy_workqueue(kpcitest_workqueue);
pci_epf_unregister_driver(&test_driver);
}
module_exit(pci_epf_test_exit);
--
2.30.2
From: Chuck Lever <[email protected]>
[ Upstream commit 6cf23783f750634e10daeede48b0f5f5d64ebf3a ]
This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.
BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872
CPU: 11 PID: 331872 Comm: git Tainted: G S 5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
dump_stack+0x9c/0xcf
print_address_description.constprop.0+0x18/0x239
kasan_report+0x174/0x1b0
trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
call_transmit+0x4d/0xc6 [sunrpc]
Fixes: 9ce07ae5eb1d ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/sunrpc.h | 1 -
net/sunrpc/xprt.c | 2 --
2 files changed, 3 deletions(-)
diff --git a/include/trace/events/sunrpc.h b/include/trace/events/sunrpc.h
index 2a03263b5f9d..23db248a7fdb 100644
--- a/include/trace/events/sunrpc.h
+++ b/include/trace/events/sunrpc.h
@@ -1141,7 +1141,6 @@ DECLARE_EVENT_CLASS(xprt_writelock_event,
DEFINE_WRITELOCK_EVENT(reserve_xprt);
DEFINE_WRITELOCK_EVENT(release_xprt);
-DEFINE_WRITELOCK_EVENT(transmit_queued);
DECLARE_EVENT_CLASS(xprt_cong_event,
TP_PROTO(
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 99d07513237e..586bc9d98de1 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1441,8 +1441,6 @@ bool xprt_prepare_transmit(struct rpc_task *task)
struct rpc_xprt *xprt = req->rq_xprt;
if (!xprt_lock_write(xprt, task)) {
- trace_xprt_transmit_queued(xprt, task);
-
/* Race breaker: someone may have transmitted us */
if (!test_bit(RPC_TASK_NEED_XMIT, &task->tk_runstate))
rpc_wake_up_queued_task_set_status(&xprt->sending,
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 8926cc8302819be9e67f70409ed001ecb2c924a9 ]
If the NFS super block is being unmounted, then we currently may end up
telling the server that we've forgotten the layout while it is actually
still in use by the client.
In that case, just assume that the client will soon return the layout
anyway, and so return NFS4ERR_DELAY in response to the layout recall.
Fixes: 58ac3e59235f ("NFSv4/pnfs: Clean up nfs_layout_find_inode()")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback_proc.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index e61dbc9b86ae..be546ece383f 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -132,12 +132,12 @@ static struct inode *nfs_layout_find_inode_by_stateid(struct nfs_client *clp,
list_for_each_entry_rcu(lo, &server->layouts, plh_layouts) {
if (!pnfs_layout_is_valid(lo))
continue;
- if (stateid != NULL &&
- !nfs4_stateid_match_other(stateid, &lo->plh_stateid))
+ if (!nfs4_stateid_match_other(stateid, &lo->plh_stateid))
continue;
- if (!nfs_sb_active(server->super))
- continue;
- inode = igrab(lo->plh_inode);
+ if (nfs_sb_active(server->super))
+ inode = igrab(lo->plh_inode);
+ else
+ inode = ERR_PTR(-EAGAIN);
rcu_read_unlock();
if (inode)
return inode;
@@ -171,9 +171,10 @@ static struct inode *nfs_layout_find_inode_by_fh(struct nfs_client *clp,
continue;
if (nfsi->layout != lo)
continue;
- if (!nfs_sb_active(server->super))
- continue;
- inode = igrab(lo->plh_inode);
+ if (nfs_sb_active(server->super))
+ inode = igrab(lo->plh_inode);
+ else
+ inode = ERR_PTR(-EAGAIN);
rcu_read_unlock();
if (inode)
return inode;
--
2.30.2
From: Chris Dion <[email protected]>
[ Upstream commit 09252177d5f924f404551b4b4eded5daa7f04a3a ]
Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.
For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:
1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
reached, but skipped because the minor timeout is not reached
- After this time the cpu spins continually calling
xport_adjust_timeout() and returning 0 for 10 seconds.
As seen on perf sched:
39243.913182 [0005] mount.nfs[3794] 4607.938 0.017 9746.863
6. This continues until the 15s minor timeout condition is reached (in
this case for 10 seconds). After which the ETIMEOUT is processed
back to the caller, the cpu spinning stops, and normal operations
continue
Fixes: 7de62bc09fe6 ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 586bc9d98de1..a85759d8cde8 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -670,9 +670,9 @@ int xprt_adjust_timeout(struct rpc_rqst *req)
const struct rpc_timeout *to = req->rq_task->tk_client->cl_timeout;
int status = 0;
- if (time_before(jiffies, req->rq_minortimeo))
- return status;
if (time_before(jiffies, req->rq_majortimeo)) {
+ if (time_before(jiffies, req->rq_minortimeo))
+ return status;
if (to->to_exponential)
req->rq_timeout <<= 1;
else
--
2.30.2
From: Chuck Lever <[email protected]>
[ Upstream commit 7638e0bfaed1b653d3ca663e560e9ffb44bb1030 ]
I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.
The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.
Fixes: 4a0682583988 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/clnt.c | 1 -
net/sunrpc/xprt.c | 6 ++++--
net/sunrpc/xprtrdma/transport.c | 6 ++++--
3 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 3259120462ed..69d8843a26e0 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1802,7 +1802,6 @@ call_allocate(struct rpc_task *task)
status = xprt->ops->buf_alloc(task);
trace_rpc_buf_alloc(task, status);
- xprt_inject_disconnect(xprt);
if (status == 0)
return;
if (status != -ENOMEM) {
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 57f09ea3ef2a..99d07513237e 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1455,7 +1455,10 @@ bool xprt_prepare_transmit(struct rpc_task *task)
void xprt_end_transmit(struct rpc_task *task)
{
- xprt_release_write(task->tk_rqstp->rq_xprt, task);
+ struct rpc_xprt *xprt = task->tk_rqstp->rq_xprt;
+
+ xprt_inject_disconnect(xprt);
+ xprt_release_write(xprt, task);
}
/**
@@ -1857,7 +1860,6 @@ void xprt_release(struct rpc_task *task)
spin_unlock(&xprt->transport_lock);
if (req->rq_buffer)
xprt->ops->buf_free(task);
- xprt_inject_disconnect(xprt);
xdr_free_bvec(&req->rq_rcv_buf);
xdr_free_bvec(&req->rq_snd_buf);
if (req->rq_cred != NULL)
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 035060c05fd5..f93ff4282bf4 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -262,8 +262,10 @@ xprt_rdma_connect_worker(struct work_struct *work)
* xprt_rdma_inject_disconnect - inject a connection fault
* @xprt: transport context
*
- * If @xprt is connected, disconnect it to simulate spurious connection
- * loss.
+ * If @xprt is connected, disconnect it to simulate spurious
+ * connection loss. Caller must hold @xprt's send lock to
+ * ensure that data structures and hardware resources are
+ * stable during the rdma_disconnect() call.
*/
static void
xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
--
2.30.2
From: Dave Jiang <[email protected]>
[ Upstream commit 397862855619271296e46d10f7dfa7bafe71eb81 ]
The devm managed lifetime is incompatible with 'struct device' objects that
resides in idxd context. This is one of the series that clean up the idxd
driver 'struct device' lifetime. Remove embedding of dma_device and dma_chan
in idxd since it's not the only interface that idxd will use. The freeing of
the dma_device will be managed by the ->release() function.
Reported-by: Jason Gunthorpe <[email protected]>
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Link: https://lore.kernel.org/r/161852983001.2203940.14817017492384561719.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/device.c | 2 -
drivers/dma/idxd/dma.c | 77 ++++++++++++++++++++++++++++++++-------
drivers/dma/idxd/idxd.h | 18 +++++++--
3 files changed, 79 insertions(+), 18 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index f90fdf7aeeef..47aae5fe8273 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -169,8 +169,6 @@ int idxd_wq_alloc_resources(struct idxd_wq *wq)
desc->id = i;
desc->wq = wq;
desc->cpu = -1;
- dma_async_tx_descriptor_init(&desc->txd, &wq->dma_chan);
- desc->txd.tx_submit = idxd_dma_tx_submit;
}
return 0;
diff --git a/drivers/dma/idxd/dma.c b/drivers/dma/idxd/dma.c
index ec177a535d6d..aa7435555de9 100644
--- a/drivers/dma/idxd/dma.c
+++ b/drivers/dma/idxd/dma.c
@@ -14,7 +14,10 @@
static inline struct idxd_wq *to_idxd_wq(struct dma_chan *c)
{
- return container_of(c, struct idxd_wq, dma_chan);
+ struct idxd_dma_chan *idxd_chan;
+
+ idxd_chan = container_of(c, struct idxd_dma_chan, chan);
+ return idxd_chan->wq;
}
void idxd_dma_complete_txd(struct idxd_desc *desc,
@@ -144,7 +147,7 @@ static void idxd_dma_issue_pending(struct dma_chan *dma_chan)
{
}
-dma_cookie_t idxd_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+static dma_cookie_t idxd_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct dma_chan *c = tx->chan;
struct idxd_wq *wq = to_idxd_wq(c);
@@ -165,14 +168,25 @@ dma_cookie_t idxd_dma_tx_submit(struct dma_async_tx_descriptor *tx)
static void idxd_dma_release(struct dma_device *device)
{
+ struct idxd_dma_dev *idxd_dma = container_of(device, struct idxd_dma_dev, dma);
+
+ kfree(idxd_dma);
}
int idxd_register_dma_device(struct idxd_device *idxd)
{
- struct dma_device *dma = &idxd->dma_dev;
+ struct idxd_dma_dev *idxd_dma;
+ struct dma_device *dma;
+ struct device *dev = &idxd->pdev->dev;
+ int rc;
+ idxd_dma = kzalloc_node(sizeof(*idxd_dma), GFP_KERNEL, dev_to_node(dev));
+ if (!idxd_dma)
+ return -ENOMEM;
+
+ dma = &idxd_dma->dma;
INIT_LIST_HEAD(&dma->channels);
- dma->dev = &idxd->pdev->dev;
+ dma->dev = dev;
dma_cap_set(DMA_PRIVATE, dma->cap_mask);
dma_cap_set(DMA_COMPLETION_NO_ORDER, dma->cap_mask);
@@ -188,35 +202,72 @@ int idxd_register_dma_device(struct idxd_device *idxd)
dma->device_alloc_chan_resources = idxd_dma_alloc_chan_resources;
dma->device_free_chan_resources = idxd_dma_free_chan_resources;
- return dma_async_device_register(&idxd->dma_dev);
+ rc = dma_async_device_register(dma);
+ if (rc < 0) {
+ kfree(idxd_dma);
+ return rc;
+ }
+
+ idxd_dma->idxd = idxd;
+ /*
+ * This pointer is protected by the refs taken by the dma_chan. It will remain valid
+ * as long as there are outstanding channels.
+ */
+ idxd->idxd_dma = idxd_dma;
+ return 0;
}
void idxd_unregister_dma_device(struct idxd_device *idxd)
{
- dma_async_device_unregister(&idxd->dma_dev);
+ dma_async_device_unregister(&idxd->idxd_dma->dma);
}
int idxd_register_dma_channel(struct idxd_wq *wq)
{
struct idxd_device *idxd = wq->idxd;
- struct dma_device *dma = &idxd->dma_dev;
- struct dma_chan *chan = &wq->dma_chan;
- int rc;
+ struct dma_device *dma = &idxd->idxd_dma->dma;
+ struct device *dev = &idxd->pdev->dev;
+ struct idxd_dma_chan *idxd_chan;
+ struct dma_chan *chan;
+ int rc, i;
+
+ idxd_chan = kzalloc_node(sizeof(*idxd_chan), GFP_KERNEL, dev_to_node(dev));
+ if (!idxd_chan)
+ return -ENOMEM;
- memset(&wq->dma_chan, 0, sizeof(struct dma_chan));
+ chan = &idxd_chan->chan;
chan->device = dma;
list_add_tail(&chan->device_node, &dma->channels);
+
+ for (i = 0; i < wq->num_descs; i++) {
+ struct idxd_desc *desc = wq->descs[i];
+
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ desc->txd.tx_submit = idxd_dma_tx_submit;
+ }
+
rc = dma_async_device_channel_register(dma, chan);
- if (rc < 0)
+ if (rc < 0) {
+ kfree(idxd_chan);
return rc;
+ }
+
+ wq->idxd_chan = idxd_chan;
+ idxd_chan->wq = wq;
+ get_device(&wq->conf_dev);
return 0;
}
void idxd_unregister_dma_channel(struct idxd_wq *wq)
{
- struct dma_chan *chan = &wq->dma_chan;
+ struct idxd_dma_chan *idxd_chan = wq->idxd_chan;
+ struct dma_chan *chan = &idxd_chan->chan;
+ struct idxd_dma_dev *idxd_dma = wq->idxd->idxd_dma;
- dma_async_device_channel_unregister(&wq->idxd->dma_dev, chan);
+ dma_async_device_channel_unregister(&idxd_dma->dma, chan);
list_del(&chan->device_node);
+ kfree(wq->idxd_chan);
+ wq->idxd_chan = NULL;
+ put_device(&wq->conf_dev);
}
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index 1d7849cb9100..adf30dc23685 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -14,6 +14,9 @@
extern struct kmem_cache *idxd_desc_pool;
+struct idxd_device;
+struct idxd_wq;
+
#define IDXD_REG_TIMEOUT 50
#define IDXD_DRAIN_TIMEOUT 5000
@@ -88,6 +91,11 @@ enum idxd_complete_type {
IDXD_COMPLETE_ABORT,
};
+struct idxd_dma_chan {
+ struct dma_chan chan;
+ struct idxd_wq *wq;
+};
+
struct idxd_wq {
void __iomem *dportal;
struct device conf_dev;
@@ -112,7 +120,7 @@ struct idxd_wq {
int compls_size;
struct idxd_desc **descs;
struct sbitmap_queue sbq;
- struct dma_chan dma_chan;
+ struct idxd_dma_chan *idxd_chan;
char name[WQ_NAME_SIZE + 1];
u64 max_xfer_bytes;
u32 max_batch_size;
@@ -147,6 +155,11 @@ enum idxd_device_flag {
IDXD_FLAG_CMD_RUNNING,
};
+struct idxd_dma_dev {
+ struct idxd_device *idxd;
+ struct dma_device dma;
+};
+
struct idxd_device {
enum idxd_type type;
struct device conf_dev;
@@ -191,7 +204,7 @@ struct idxd_device {
int num_wq_irqs;
struct idxd_irq_entry *irq_entries;
- struct dma_device dma_dev;
+ struct idxd_dma_dev *idxd_dma;
struct workqueue_struct *wq;
struct work_struct work;
};
@@ -313,7 +326,6 @@ void idxd_unregister_dma_channel(struct idxd_wq *wq);
void idxd_parse_completion_status(u8 status, enum dmaengine_tx_result *res);
void idxd_dma_complete_txd(struct idxd_desc *desc,
enum idxd_complete_type comp_type);
-dma_cookie_t idxd_dma_tx_submit(struct dma_async_tx_descriptor *tx);
/* cdev */
int idxd_cdev_register(void);
--
2.30.2
From: Guangqing Zhu <[email protected]>
[ Upstream commit f4136863e8899fa0554343201b78b9e197c78a78 ]
Fixes coccicheck error:
drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call
of_find_device_by_node on line 715, but without a corresponding object
release within this function.
Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c")
Signed-off-by: Guangqing Zhu <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/qcom/tsens.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index d8ce3a687b80..3c4c0516e58a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -755,8 +755,10 @@ int __init init_common(struct tsens_priv *priv)
for (i = VER_MAJOR; i <= VER_STEP; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[i]);
- if (IS_ERR(priv->rf[i]))
- return PTR_ERR(priv->rf[i]);
+ if (IS_ERR(priv->rf[i])) {
+ ret = PTR_ERR(priv->rf[i]);
+ goto err_put_device;
+ }
}
ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
if (ret)
--
2.30.2
From: J. Bruce Fields <[email protected]>
[ Upstream commit 217fd6f625af591e2866bebb8cda778cf85bea2e ]
If nfsd already has an open file that it plans to use for IO from
another, it may not need to do another vfs open, but it still may need
to break any delegations in case the existing opens are for another
client.
Symptoms are that we may incorrectly fail to break a delegation on a
write open from a different client, when the delegation-holding client
already has a write open.
Fixes: 28df3d1539de ("nfsd: clients don't need to break their own delegations")
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/nfs4state.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 55cf60b71cde..ac20f79bbedd 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4874,6 +4874,11 @@ static __be32 nfs4_get_vfs_file(struct svc_rqst *rqstp, struct nfs4_file *fp,
if (nf)
nfsd_file_put(nf);
+ status = nfserrno(nfsd_open_break_lease(cur_fh->fh_dentry->d_inode,
+ access));
+ if (status)
+ goto out_put_access;
+
status = nfsd4_truncate(rqstp, cur_fh, open);
if (status)
goto out_put_access;
@@ -6856,11 +6861,20 @@ out:
static __be32 nfsd_test_lock(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file_lock *lock)
{
struct nfsd_file *nf;
- __be32 err = nfsd_file_acquire(rqstp, fhp, NFSD_MAY_READ, &nf);
- if (!err) {
- err = nfserrno(vfs_test_lock(nf->nf_file, lock));
- nfsd_file_put(nf);
- }
+ __be32 err;
+
+ err = nfsd_file_acquire(rqstp, fhp, NFSD_MAY_READ, &nf);
+ if (err)
+ return err;
+ fh_lock(fhp); /* to block new leases till after test_lock: */
+ err = nfserrno(nfsd_open_break_lease(fhp->fh_dentry->d_inode,
+ NFSD_MAY_READ));
+ if (err)
+ goto out;
+ err = nfserrno(vfs_test_lock(nf->nf_file, lock));
+out:
+ fh_unlock(fhp);
+ nfsd_file_put(nf);
return err;
}
--
2.30.2
From: Michael Walle <[email protected]>
[ Upstream commit 7fcb86185978661c9188397d474f90364745b8d9 ]
The module doesn't load automatically. Fix it by adding the missing
MODULE_TABLE().
Fixes: 7b0b551dbc1e ("rtc: fsl-ftm-alarm: add FTM alarm driver")
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-fsl-ftm-alarm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 48d3b38ea348..e08672e26203 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -310,6 +310,7 @@ static const struct of_device_id ftm_rtc_match[] = {
{ .compatible = "fsl,lx2160a-ftm-alarm", },
{ },
};
+MODULE_DEVICE_TABLE(of, ftm_rtc_match);
static const struct acpi_device_id ftm_imx_acpi_ids[] = {
{"NXP0014",},
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 28ac8e03c43dfc6a703aa420d18222540b801120 ]
There are calls to idxd_cmd_exec that pass a null status pointer however
a recent commit has added an assignment to *status that can end up
with a null pointer dereference. The function expects a null status
pointer sometimes as there is a later assignment to *status where
status is first null checked. Fix the issue by null checking status
before making the assignment.
Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 89e3becd8f82 ("dmaengine: idxd: check device state before issue command")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/device.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 459e9fbc2253..f90fdf7aeeef 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -378,7 +378,8 @@ static void idxd_cmd_exec(struct idxd_device *idxd, int cmd_code, u32 operand,
if (idxd_device_is_halted(idxd)) {
dev_warn(&idxd->pdev->dev, "Device is HALTED!\n");
- *status = IDXD_CMDSTS_HW_ERR;
+ if (status)
+ *status = IDXD_CMDSTS_HW_ERR;
return;
}
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit cb579086536f6564f5846f89808ec394ef8b8621 ]
This code is supposed to pass negative "err" values for tracing but it
passes positive values instead. The problem is that the
trace_svcsock_tcp_send() function takes a long but "err" is an int and
"sent" is a u32. The negative is first type promoted to u32 so it
becomes a high positive then it is promoted to long and it stays
positive.
Fix this by casting "err" directly to long.
Fixes: 998024dee197 ("SUNRPC: Add more svcsock tracepoints")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/svcsock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index fa7b7ae2c2c5..eba1714bf09a 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1176,7 +1176,7 @@ static int svc_tcp_sendto(struct svc_rqst *rqstp)
goto out_notconn;
err = svc_tcp_sendmsg(svsk->sk_sock, &msg, xdr, marker, &sent);
xdr_free_bvec(xdr);
- trace_svcsock_tcp_send(xprt, err < 0 ? err : sent);
+ trace_svcsock_tcp_send(xprt, err < 0 ? (long)err : sent);
if (err < 0 || sent != (xdr->len + sizeof(marker)))
goto out_close;
mutex_unlock(&xprt->xpt_mutex);
--
2.30.2
From: Dave Jiang <[email protected]>
[ Upstream commit 04922b7445a1950b86f130a1fe8c52cc27b3e30b ]
The char device setup and cleanup has device lifetime issues regarding when
parts are initialized and cleaned up. The initialization of struct device is
done incorrectly. device_initialize() needs to be called on the 'struct
device' and then additional changes can be added. The ->release() function
needs to be setup via device_type before dev_set_name() to allow proper
cleanup. The change re-parents the cdev under the wq->conf_dev to get
natural reference inheritance. No known dependency on the old device path exists.
Reported-by: Jason Gunthorpe <[email protected]>
Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Link: https://lore.kernel.org/r/161852987721.2203940.1478218825576630810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/idxd/cdev.c | 129 ++++++++++++++-------------------------
drivers/dma/idxd/idxd.h | 7 ++-
drivers/dma/idxd/init.c | 2 +-
drivers/dma/idxd/irq.c | 4 +-
drivers/dma/idxd/sysfs.c | 10 ++-
5 files changed, 63 insertions(+), 89 deletions(-)
diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c
index c3976156db2f..4da88578ed64 100644
--- a/drivers/dma/idxd/cdev.c
+++ b/drivers/dma/idxd/cdev.c
@@ -35,15 +35,15 @@ struct idxd_user_context {
unsigned int flags;
};
-enum idxd_cdev_cleanup {
- CDEV_NORMAL = 0,
- CDEV_FAILED,
-};
-
static void idxd_cdev_dev_release(struct device *dev)
{
- dev_dbg(dev, "releasing cdev device\n");
- kfree(dev);
+ struct idxd_cdev *idxd_cdev = container_of(dev, struct idxd_cdev, dev);
+ struct idxd_cdev_context *cdev_ctx;
+ struct idxd_wq *wq = idxd_cdev->wq;
+
+ cdev_ctx = &ictx[wq->idxd->type];
+ ida_simple_remove(&cdev_ctx->minor_ida, idxd_cdev->minor);
+ kfree(idxd_cdev);
}
static struct device_type idxd_cdev_device_type = {
@@ -58,14 +58,11 @@ static inline struct idxd_cdev *inode_idxd_cdev(struct inode *inode)
return container_of(cdev, struct idxd_cdev, cdev);
}
-static inline struct idxd_wq *idxd_cdev_wq(struct idxd_cdev *idxd_cdev)
-{
- return container_of(idxd_cdev, struct idxd_wq, idxd_cdev);
-}
-
static inline struct idxd_wq *inode_wq(struct inode *inode)
{
- return idxd_cdev_wq(inode_idxd_cdev(inode));
+ struct idxd_cdev *idxd_cdev = inode_idxd_cdev(inode);
+
+ return idxd_cdev->wq;
}
static int idxd_cdev_open(struct inode *inode, struct file *filp)
@@ -172,11 +169,10 @@ static __poll_t idxd_cdev_poll(struct file *filp,
struct idxd_user_context *ctx = filp->private_data;
struct idxd_wq *wq = ctx->wq;
struct idxd_device *idxd = wq->idxd;
- struct idxd_cdev *idxd_cdev = &wq->idxd_cdev;
unsigned long flags;
__poll_t out = 0;
- poll_wait(filp, &idxd_cdev->err_queue, wait);
+ poll_wait(filp, &wq->err_queue, wait);
spin_lock_irqsave(&idxd->dev_lock, flags);
if (idxd->sw_err.valid)
out = EPOLLIN | EPOLLRDNORM;
@@ -198,98 +194,67 @@ int idxd_cdev_get_major(struct idxd_device *idxd)
return MAJOR(ictx[idxd->type].devt);
}
-static int idxd_wq_cdev_dev_setup(struct idxd_wq *wq)
+int idxd_wq_add_cdev(struct idxd_wq *wq)
{
struct idxd_device *idxd = wq->idxd;
- struct idxd_cdev *idxd_cdev = &wq->idxd_cdev;
- struct idxd_cdev_context *cdev_ctx;
+ struct idxd_cdev *idxd_cdev;
+ struct cdev *cdev;
struct device *dev;
- int minor, rc;
+ struct idxd_cdev_context *cdev_ctx;
+ int rc, minor;
- idxd_cdev->dev = kzalloc(sizeof(*idxd_cdev->dev), GFP_KERNEL);
- if (!idxd_cdev->dev)
+ idxd_cdev = kzalloc(sizeof(*idxd_cdev), GFP_KERNEL);
+ if (!idxd_cdev)
return -ENOMEM;
- dev = idxd_cdev->dev;
- dev->parent = &idxd->pdev->dev;
- dev_set_name(dev, "%s/wq%u.%u", idxd_get_dev_name(idxd),
- idxd->id, wq->id);
- dev->bus = idxd_get_bus_type(idxd);
-
+ idxd_cdev->wq = wq;
+ cdev = &idxd_cdev->cdev;
+ dev = &idxd_cdev->dev;
cdev_ctx = &ictx[wq->idxd->type];
minor = ida_simple_get(&cdev_ctx->minor_ida, 0, MINORMASK, GFP_KERNEL);
if (minor < 0) {
- rc = minor;
- kfree(dev);
- goto ida_err;
- }
-
- dev->devt = MKDEV(MAJOR(cdev_ctx->devt), minor);
- dev->type = &idxd_cdev_device_type;
- rc = device_register(dev);
- if (rc < 0) {
- dev_err(&idxd->pdev->dev, "device register failed\n");
- goto dev_reg_err;
+ kfree(idxd_cdev);
+ return minor;
}
idxd_cdev->minor = minor;
- return 0;
-
- dev_reg_err:
- ida_simple_remove(&cdev_ctx->minor_ida, MINOR(dev->devt));
- put_device(dev);
- ida_err:
- idxd_cdev->dev = NULL;
- return rc;
-}
-
-static void idxd_wq_cdev_cleanup(struct idxd_wq *wq,
- enum idxd_cdev_cleanup cdev_state)
-{
- struct idxd_cdev *idxd_cdev = &wq->idxd_cdev;
- struct idxd_cdev_context *cdev_ctx;
-
- cdev_ctx = &ictx[wq->idxd->type];
- if (cdev_state == CDEV_NORMAL)
- cdev_del(&idxd_cdev->cdev);
- device_unregister(idxd_cdev->dev);
- /*
- * The device_type->release() will be called on the device and free
- * the allocated struct device. We can just forget it.
- */
- ida_simple_remove(&cdev_ctx->minor_ida, idxd_cdev->minor);
- idxd_cdev->dev = NULL;
- idxd_cdev->minor = -1;
-}
-
-int idxd_wq_add_cdev(struct idxd_wq *wq)
-{
- struct idxd_cdev *idxd_cdev = &wq->idxd_cdev;
- struct cdev *cdev = &idxd_cdev->cdev;
- struct device *dev;
- int rc;
+ device_initialize(dev);
+ dev->parent = &wq->conf_dev;
+ dev->bus = idxd_get_bus_type(idxd);
+ dev->type = &idxd_cdev_device_type;
+ dev->devt = MKDEV(MAJOR(cdev_ctx->devt), minor);
- rc = idxd_wq_cdev_dev_setup(wq);
+ rc = dev_set_name(dev, "%s/wq%u.%u", idxd_get_dev_name(idxd),
+ idxd->id, wq->id);
if (rc < 0)
- return rc;
+ goto err;
- dev = idxd_cdev->dev;
+ wq->idxd_cdev = idxd_cdev;
cdev_init(cdev, &idxd_cdev_fops);
- cdev_set_parent(cdev, &dev->kobj);
- rc = cdev_add(cdev, dev->devt, 1);
+ rc = cdev_device_add(cdev, dev);
if (rc) {
dev_dbg(&wq->idxd->pdev->dev, "cdev_add failed: %d\n", rc);
- idxd_wq_cdev_cleanup(wq, CDEV_FAILED);
- return rc;
+ goto err;
}
- init_waitqueue_head(&idxd_cdev->err_queue);
return 0;
+
+ err:
+ put_device(dev);
+ wq->idxd_cdev = NULL;
+ return rc;
}
void idxd_wq_del_cdev(struct idxd_wq *wq)
{
- idxd_wq_cdev_cleanup(wq, CDEV_NORMAL);
+ struct idxd_cdev *idxd_cdev;
+ struct idxd_cdev_context *cdev_ctx;
+
+ cdev_ctx = &ictx[wq->idxd->type];
+ idxd_cdev = wq->idxd_cdev;
+ wq->idxd_cdev = NULL;
+ cdev_device_del(&idxd_cdev->cdev, &idxd_cdev->dev);
+ put_device(&idxd_cdev->dev);
}
int idxd_cdev_register(void)
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index adf30dc23685..eef6996ecc59 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -71,10 +71,10 @@ enum idxd_wq_type {
};
struct idxd_cdev {
+ struct idxd_wq *wq;
struct cdev cdev;
- struct device *dev;
+ struct device dev;
int minor;
- struct wait_queue_head err_queue;
};
#define IDXD_ALLOCATED_BATCH_SIZE 128U
@@ -99,7 +99,8 @@ struct idxd_dma_chan {
struct idxd_wq {
void __iomem *dportal;
struct device conf_dev;
- struct idxd_cdev idxd_cdev;
+ struct idxd_cdev *idxd_cdev;
+ struct wait_queue_head err_queue;
struct idxd_device *idxd;
int id;
enum idxd_wq_type type;
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index fa8c4228f358..f4c7ce8cb399 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -175,7 +175,7 @@ static int idxd_setup_internals(struct idxd_device *idxd)
wq->id = i;
wq->idxd = idxd;
mutex_init(&wq->wq_lock);
- wq->idxd_cdev.minor = -1;
+ init_waitqueue_head(&wq->err_queue);
wq->max_xfer_bytes = idxd->max_xfer_bytes;
wq->max_batch_size = idxd->max_batch_size;
wq->wqcfg = devm_kzalloc(dev, idxd->wqcfg_size, GFP_KERNEL);
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index 6bb1c1773aae..fc9579180705 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -75,7 +75,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
struct idxd_wq *wq = &idxd->wqs[id];
if (wq->type == IDXD_WQT_USER)
- wake_up_interruptible(&wq->idxd_cdev.err_queue);
+ wake_up_interruptible(&wq->err_queue);
} else {
int i;
@@ -83,7 +83,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
struct idxd_wq *wq = &idxd->wqs[i];
if (wq->type == IDXD_WQT_USER)
- wake_up_interruptible(&wq->idxd_cdev.err_queue);
+ wake_up_interruptible(&wq->err_queue);
}
}
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 7566b573d546..7b41cdff1a2c 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -1052,8 +1052,16 @@ static ssize_t wq_cdev_minor_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+ int minor = -1;
- return sprintf(buf, "%d\n", wq->idxd_cdev.minor);
+ mutex_lock(&wq->wq_lock);
+ if (wq->idxd_cdev)
+ minor = wq->idxd_cdev->minor;
+ mutex_unlock(&wq->wq_lock);
+
+ if (minor == -1)
+ return -ENXIO;
+ return sysfs_emit(buf, "%d\n", minor);
}
static struct device_attribute dev_attr_wq_cdev_minor =
--
2.30.2
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 453e8b3d8e36ddcb283b3d1698864a03ea45599a ]
The CDTY register contains the number of inactive cycles. .apply() does
this correctly, however .get_state() got this wrong.
Fixes: 651b510a74d4 ("pwm: atmel: Implement .get_state()")
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-atmel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 6161e7e3e9ac..d7cb0dfa25a5 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -319,7 +319,7 @@ static void atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
atmel_pwm->data->regs.duty);
- tmp = (u64)cdty * NSEC_PER_SEC;
+ tmp = (u64)(cprd - cdty) * NSEC_PER_SEC;
tmp <<= pres;
state->duty_cycle = DIV64_U64_ROUND_UP(tmp, rate);
--
2.30.2
From: Chuck Lever <[email protected]>
[ Upstream commit 32e6b68167f1d446111c973d57e6f52aee11897a ]
Commit e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.
This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.
Fixes: e340c2d6ef2a ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <[email protected]>
Reviewed-by: Tom Talpey <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/frwr_ops.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index 44888f5badef..8f96bb0a6061 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -242,6 +242,7 @@ int frwr_query_device(struct rpcrdma_ep *ep, const struct ib_device *device)
ep->re_attr.cap.max_send_wr += 1; /* for ib_drain_sq */
ep->re_attr.cap.max_recv_wr = ep->re_max_requests;
ep->re_attr.cap.max_recv_wr += RPCRDMA_BACKWARD_WRS;
+ ep->re_attr.cap.max_recv_wr += RPCRDMA_MAX_RECV_BATCH;
ep->re_attr.cap.max_recv_wr += 1; /* for ib_drain_rq */
ep->re_max_rdma_segs =
--
2.30.2
From: Chuck Lever <[email protected]>
[ Upstream commit 35d8b10a25884050bb3b0149b62c3818ec59f77c ]
After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.
The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv().
Fixes: 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/rpc_rdma.c | 3 ++-
net/sunrpc/xprtrdma/verbs.c | 10 +++++-----
net/sunrpc/xprtrdma/xprt_rdma.h | 2 +-
3 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index c48536f2121f..ca267a855a12 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -1467,9 +1467,10 @@ void rpcrdma_reply_handler(struct rpcrdma_rep *rep)
credits = 1; /* don't deadlock */
else if (credits > r_xprt->rx_ep->re_max_requests)
credits = r_xprt->rx_ep->re_max_requests;
+ rpcrdma_post_recvs(r_xprt, credits + (buf->rb_bc_srv_max_requests << 1),
+ false);
if (buf->rb_credits != credits)
rpcrdma_update_cwnd(r_xprt, credits);
- rpcrdma_post_recvs(r_xprt, false);
req = rpcr_to_rdmar(rqst);
if (req->rl_reply) {
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index ad6e2e4994ce..04325f0267c1 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -535,7 +535,7 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt)
* outstanding Receives.
*/
rpcrdma_ep_get(ep);
- rpcrdma_post_recvs(r_xprt, true);
+ rpcrdma_post_recvs(r_xprt, 1, true);
rc = rdma_connect(ep->re_id, &ep->re_remote_cma);
if (rc)
@@ -1377,21 +1377,21 @@ int rpcrdma_post_sends(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
/**
* rpcrdma_post_recvs - Refill the Receive Queue
* @r_xprt: controlling transport instance
- * @temp: mark Receive buffers to be deleted after use
+ * @needed: current credit grant
+ * @temp: mark Receive buffers to be deleted after one use
*
*/
-void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
+void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, int needed, bool temp)
{
struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
struct rpcrdma_ep *ep = r_xprt->rx_ep;
struct ib_recv_wr *wr, *bad_wr;
struct rpcrdma_rep *rep;
- int needed, count, rc;
+ int count, rc;
rc = 0;
count = 0;
- needed = buf->rb_credits + (buf->rb_bc_srv_max_requests << 1);
if (likely(ep->re_receive_count > needed))
goto out;
needed -= ep->re_receive_count;
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 43974ef39a50..3cacc6f4c527 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -452,7 +452,7 @@ int rpcrdma_xprt_connect(struct rpcrdma_xprt *r_xprt);
void rpcrdma_xprt_disconnect(struct rpcrdma_xprt *r_xprt);
int rpcrdma_post_sends(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req);
-void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp);
+void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, int needed, bool temp);
/*
* Buffer calls - xprtrdma/verbs.c
--
2.30.2
From: Chuck Lever <[email protected]>
[ Upstream commit 1363e6388c363d0433f9aa4e2f33efe047572687 ]
The rpcrdma_mr_pop() earlier in the function has already cleared
out mr_list, so it must not be done again in the error path.
Fixes: 847568942f93 ("xprtrdma: Remove fr_state")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/frwr_ops.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index 8f96bb0a6061..bf3627dce552 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -555,7 +555,6 @@ void frwr_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
mr = container_of(frwr, struct rpcrdma_mr, frwr);
bad_wr = bad_wr->next;
- list_del_init(&mr->mr_list);
frwr_mr_recycle(mr);
}
}
--
2.30.2
From: Claire Chang <[email protected]>
[ Upstream commit 95b079d8215b83b37fa59341fda92fcb9392f14a ]
Fix the type of index from unsigned int to int since find_slots() might
return -1.
Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Claire Chang <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/swiotlb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index ba4055a192e4..0f61b14b0099 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -563,7 +563,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
enum dma_data_direction dir, unsigned long attrs)
{
unsigned int offset = swiotlb_align_offset(dev, orig_addr);
- unsigned int index, i;
+ unsigned int i;
+ int index;
phys_addr_t tlb_addr;
if (no_iotlb_memory)
--
2.30.2
From: Yi Zhuang <[email protected]>
[ Upstream commit be1ee45d51384161681ecf21085a42d316ae25f7 ]
In the cache writing process, if it is an atomic file, increase the page
count of F2FS_WB_CP_DATA, otherwise increase the page count of
F2FS_WB_DATA.
When you step into the hook branch due to insufficient memory in
f2fs_write_begin, f2fs_drop_inmem_pages_all will be called to traverse
all atomic inodes and clear the FI_ATOMIC_FILE mark of all atomic files.
In f2fs_drop_inmem_pages，first acquire the inmem_lock , revoke all the
inmem_pages, and then clear the FI_ATOMIC_FILE mark. Before this mark is
cleared, other threads may hold inmem_lock to add inmem_pages to the inode
that has just been emptied inmem_pages, and increase the page count of
F2FS_WB_CP_DATA.
When the IO returns, it is found that the FI_ATOMIC_FILE flag is cleared
by f2fs_drop_inmem_pages_all, and f2fs_is_atomic_file returns false,which
causes the page count of F2FS_WB_DATA to be decremented. The page count of
F2FS_WB_CP_DATA cannot be cleared. Finally, hungtask is triggered in
f2fs_wait_on_all_pages because get_pages will never return zero.
process A: process B:
f2fs_drop_inmem_pages_all
->f2fs_drop_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__revoke_inmem_pages of inode#1 f2fs_ioc_commit_atomic_write
->mutex_unlock(&fi->inmem_lock) ->f2fs_commit_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__f2fs_commit_inmem_pages
->f2fs_do_write_data_page
->f2fs_outplace_write_data
->do_write_page
->f2fs_submit_page_write
->inc_page_count(sbi, F2FS_WB_CP_DATA )
->mutex_unlock(&fi->inmem_lock)
->spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
->clear_inode_flag(inode, FI_ATOMIC_FILE)
->spin_unlock(&sbi->inode_lock[ATOMIC_FILE])
f2fs_write_end_io
->dec_page_count(sbi, F2FS_WB_DATA );
We can fix the problem by putting the action of clearing the FI_ATOMIC_FILE
mark into the inmem_lock lock. This operation can ensure that no one will
submit the inmem pages before the FI_ATOMIC_FILE mark is cleared, so that
there will be no atomic writes waiting for writeback.
Fixes: 57864ae5ce3a ("f2fs: limit # of inmemory pages")
Signed-off-by: Yi Zhuang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index ddfc3daebe9b..1c264fd5a0dd 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -327,23 +327,27 @@ void f2fs_drop_inmem_pages(struct inode *inode)
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct f2fs_inode_info *fi = F2FS_I(inode);
- while (!list_empty(&fi->inmem_pages)) {
+ do {
mutex_lock(&fi->inmem_lock);
+ if (list_empty(&fi->inmem_pages)) {
+ fi->i_gc_failures[GC_FAILURE_ATOMIC] = 0;
+
+ spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
+ if (!list_empty(&fi->inmem_ilist))
+ list_del_init(&fi->inmem_ilist);
+ if (f2fs_is_atomic_file(inode)) {
+ clear_inode_flag(inode, FI_ATOMIC_FILE);
+ sbi->atomic_files--;
+ }
+ spin_unlock(&sbi->inode_lock[ATOMIC_FILE]);
+
+ mutex_unlock(&fi->inmem_lock);
+ break;
+ }
__revoke_inmem_pages(inode, &fi->inmem_pages,
true, false, true);
mutex_unlock(&fi->inmem_lock);
- }
-
- fi->i_gc_failures[GC_FAILURE_ATOMIC] = 0;
-
- spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
- if (!list_empty(&fi->inmem_ilist))
- list_del_init(&fi->inmem_ilist);
- if (f2fs_is_atomic_file(inode)) {
- clear_inode_flag(inode, FI_ATOMIC_FILE);
- sbi->atomic_files--;
- }
- spin_unlock(&sbi->inode_lock[ATOMIC_FILE]);
+ } while (1);
}
void f2fs_drop_inmem_page(struct inode *inode, struct page *page)
--
2.30.2
From: Anastasia Kovaleva <[email protected]>
[ Upstream commit fcb16d9a8ecf1e9bfced0fc654ea4e2caa7517f4 ]
In a case when the initiator in P2P mode by some circumstances does not
send PRLI, the target, in a case when the target port's WWPN is less than
initiator's, changes the discovery state in DSC_GNL. When gnl completes it
sends PRLI to the initiator.
Usually the initiator in P2P mode always sends PRLI. We caught this issue
on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html.
Fix this particular corner case in the behaviour of the P2P mod target
login state machine.
Link: https://lore.kernel.org/r/[email protected]
Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode")
Reviewed-by: Roman Bolshakov <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Anastasia Kovaleva <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 52e8b555bd1d..6faf34fa6220 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1190,6 +1190,9 @@ static int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
{
struct qla_work_evt *e;
+ if (vha->host->active_mode == MODE_TARGET)
+ return QLA_FUNCTION_FAILED;
+
e = qla2x00_alloc_work(vha, QLA_EVT_PRLI);
if (!e)
return QLA_FUNCTION_FAILED;
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 2867298dd49ee84214b8721521dc7a5a6382520c ]
According to the UM, the type and enable status of igu_egu_hw_err
should be configured separately. Currently, the type field is
incorrect when disable this error. So fix it by configuring these
two fields separately.
Fixes: bf1faf9415dd ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 3 ++-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
index 9ee55ee0487d..3226ca176155 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
@@ -753,8 +753,9 @@ static int hclge_config_igu_egu_hw_err_int(struct hclge_dev *hdev, bool en)
/* configure IGU,EGU error interrupts */
hclge_cmd_setup_basic_desc(&desc, HCLGE_IGU_COMMON_INT_EN, false);
+ desc.data[0] = cpu_to_le32(HCLGE_IGU_ERR_INT_TYPE);
if (en)
- desc.data[0] = cpu_to_le32(HCLGE_IGU_ERR_INT_EN);
+ desc.data[0] |= cpu_to_le32(HCLGE_IGU_ERR_INT_EN);
desc.data[1] = cpu_to_le32(HCLGE_IGU_ERR_INT_EN_MASK);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
index 608fe26fc3fe..d647f3c84134 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
@@ -32,7 +32,8 @@
#define HCLGE_TQP_ECC_ERR_INT_EN_MASK 0x0FFF
#define HCLGE_MSIX_SRAM_ECC_ERR_INT_EN_MASK 0x0F000000
#define HCLGE_MSIX_SRAM_ECC_ERR_INT_EN 0x0F000000
-#define HCLGE_IGU_ERR_INT_EN 0x0000066F
+#define HCLGE_IGU_ERR_INT_EN 0x0000000F
+#define HCLGE_IGU_ERR_INT_TYPE 0x00000660
#define HCLGE_IGU_ERR_INT_EN_MASK 0x000F
#define HCLGE_IGU_TNL_ERR_INT_EN 0x0002AABF
#define HCLGE_IGU_TNL_ERR_INT_EN_MASK 0x003F
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 568a54bdf70b143f3e0befa298e22ad469ffc732 ]
The message sent to VF should be initialized, otherwise random
value of some contents may cause improper processing by the target.
So add a initialization to message in hclge_get_link_mode().
Fixes: 9194d18b0577 ("net: hns3: fix the problem that the supported port is empty")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 9c8004fc9dc4..e0254672831f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -519,7 +519,7 @@ static void hclge_get_link_mode(struct hclge_vport *vport,
unsigned long advertising;
unsigned long supported;
unsigned long send_data;
- u8 msg_data[10];
+ u8 msg_data[10] = {};
u8 dest_vfid;
advertising = hdev->hw.mac.advertising[0];
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 25ae837e61dee712b4b1df36602ebfe724b2a0b6 ]
Callers may pass fio parameter with NULL value to f2fs_allocate_data_block(),
so we should make sure accessing fio's field after fio's validation check.
Fixes: f608c38c59c6 ("f2fs: clean up parameter of f2fs_allocate_data_block()")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 1c264fd5a0dd..d04b449978aa 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3407,12 +3407,12 @@ void f2fs_allocate_data_block(struct f2fs_sb_info *sbi, struct page *page,
f2fs_inode_chksum_set(sbi, page);
}
- if (F2FS_IO_ALIGNED(sbi))
- fio->retry = false;
-
if (fio) {
struct f2fs_bio_info *io;
+ if (F2FS_IO_ALIGNED(sbi))
+ fio->retry = false;
+
INIT_LIST_HEAD(&fio->list);
fio->in_list = true;
io = sbi->write_io[fio->type] + fio->temp;
--
2.30.2
From: Hao Chen <[email protected]>
[ Upstream commit 905416f18fe74bdd4de91bf94ef5a790a36e4b99 ]
When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet,
which has a dest port as the IANA assigned, the hardware is expected
to do the checksum offload, but the hardware whose version is below
V3 will not do the checksum offload when udp dest port is 4790.
So fixes it by doing the checksum in software for this case.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6066cb0a5abb..3a42b96cb843 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -778,7 +778,7 @@ static int hns3_get_l4_protocol(struct sk_buff *skb, u8 *ol4_proto,
* and it is udp packet, which has a dest port as the IANA assigned.
* the hardware is expected to do the checksum offload, but the
* hardware will not do the checksum offload when udp dest port is
- * 4789 or 6081.
+ * 4789, 4790 or 6081.
*/
static bool hns3_tunnel_csum_bug(struct sk_buff *skb)
{
@@ -788,7 +788,8 @@ static bool hns3_tunnel_csum_bug(struct sk_buff *skb)
if (!(!skb->encapsulation &&
(l4.udp->dest == htons(IANA_VXLAN_UDP_PORT) ||
- l4.udp->dest == htons(GENEVE_UDP_PORT))))
+ l4.udp->dest == htons(GENEVE_UDP_PORT) ||
+ l4.udp->dest == htons(4790))))
return false;
skb_checksum_help(skb);
--
2.30.2
From: Jian Shen <[email protected]>
[ Upstream commit b4047aac4ec1066bab6c71950623746d7bcf7154 ]
In some cases, the device is not initialized because reset failed.
If another task calls hns3_reset_notify_up_enet() before reset
retry, it will cause an error since uninitialized pointer access.
So add check for HNS3_NIC_STATE_INITED before calling
hns3_nic_net_open() in hns3_reset_notify_up_enet().
Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 051598341968..6066cb0a5abb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4426,6 +4426,11 @@ static int hns3_reset_notify_up_enet(struct hnae3_handle *handle)
struct hns3_nic_priv *priv = netdev_priv(kinfo->netdev);
int ret = 0;
+ if (!test_bit(HNS3_NIC_STATE_INITED, &priv->state)) {
+ netdev_err(kinfo->netdev, "device is not initialized yet\n");
+ return -EFAULT;
+ }
+
clear_bit(HNS3_NIC_STATE_RESETTING, &priv->state);
if (netif_running(kinfo->netdev)) {
--
2.30.2
From: Can Guo <[email protected]>
[ Upstream commit 23043dd87b153d02eaf676e752d32429be5e5126 ]
During resume, if link is broken due to AH8 failure, make sure
ufshcd_resume() does not put UFS power back into LPM.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Reviewed-by: Daejun Park <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4215d9a8e5de..d1900ea31b0d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8459,7 +8459,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
} else if (!ufshcd_is_ufs_dev_active(hba)) {
ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
vcc_off = true;
- if (!ufshcd_is_link_active(hba)) {
+ if (ufshcd_is_link_hibern8(hba) || ufshcd_is_link_off(hba)) {
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
}
@@ -8481,7 +8481,7 @@ static int ufshcd_vreg_set_hpm(struct ufs_hba *hba)
!hba->dev_info.is_lu_power_on_wp) {
ret = ufshcd_setup_vreg(hba, true);
} else if (!ufshcd_is_ufs_dev_active(hba)) {
- if (!ret && !ufshcd_is_link_active(hba)) {
+ if (!ufshcd_is_link_active(hba)) {
ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq);
if (ret)
goto vcc_disable;
--
2.30.2
From: Peng Li <[email protected]>
[ Upstream commit b416e872be06fdace3c36cf5210130509d0f0e72 ]
Currently, netif_tx_stop_all_queues() is used to ensure that
the xmit is not running, but for the concurrent case it will
not take effect, since netif_tx_stop_all_queues() just sets
a flag without locking to indicate that the xmit queue(s)
should not be run.
So use netif_tx_disable() to replace netif_tx_stop_all_queues(),
it takes the xmit queue lock while marking the queue stopped.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 3a42b96cb843..ef3148919970 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -526,8 +526,8 @@ static int hns3_nic_net_stop(struct net_device *netdev)
if (h->ae_algo->ops->set_timer_task)
h->ae_algo->ops->set_timer_task(priv->ae_handle, false);
- netif_tx_stop_all_queues(netdev);
netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
hns3_nic_net_down(netdev);
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit 35b4f24415c854cd718ccdf38dbea6297f010aae ]
There's a panic that occurs in a few of envs, the call trace is as below:
[] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
[] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
[] sctp_assoc_control_transport+0x1b9/0x210 [sctp]
[] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
[] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
[] sctp_do_sm+0xc3/0x2a0 [sctp]
[] sctp_generate_timeout_event+0x81/0xf0 [sctp]
This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().
Thanks Alexander and Jere for helping dig into this issue.
To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.
Fixes: 145cb2f7177d ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <[email protected]>
Reported-by: [email protected]
Reported-by: Michal Tesar <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_statefuns.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index c669f8bd1eab..d4d268b8b8aa 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1841,20 +1841,35 @@ static enum sctp_disposition sctp_sf_do_dupcook_a(
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
sctp_add_cmd_sf(commands, SCTP_CMD_PURGE_ASCONF_QUEUE, SCTP_NULL());
- repl = sctp_make_cookie_ack(new_asoc, chunk);
+ /* Update the content of current association. */
+ if (sctp_assoc_update((struct sctp_association *)asoc, new_asoc)) {
+ struct sctp_chunk *abort;
+
+ abort = sctp_make_abort(asoc, NULL, sizeof(struct sctp_errhdr));
+ if (abort) {
+ sctp_init_cause(abort, SCTP_ERROR_RSRC_LOW, 0);
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+ }
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNABORTED));
+ sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
+ SCTP_PERR(SCTP_ERROR_RSRC_LOW));
+ SCTP_INC_STATS(net, SCTP_MIB_ABORTEDS);
+ SCTP_DEC_STATS(net, SCTP_MIB_CURRESTAB);
+ goto nomem;
+ }
+
+ repl = sctp_make_cookie_ack(asoc, chunk);
if (!repl)
goto nomem;
/* Report association restart to upper layer. */
ev = sctp_ulpevent_make_assoc_change(asoc, 0, SCTP_RESTART, 0,
- new_asoc->c.sinit_num_ostreams,
- new_asoc->c.sinit_max_instreams,
+ asoc->c.sinit_num_ostreams,
+ asoc->c.sinit_max_instreams,
NULL, GFP_ATOMIC);
if (!ev)
goto nomem_ev;
- /* Update the content of current association. */
- sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
if ((sctp_state(asoc, SHUTDOWN_PENDING) ||
sctp_state(asoc, SHUTDOWN_SENT)) &&
--
2.30.2
From: Anup Patel <[email protected]>
[ Upstream commit 533b4f3a789d49574e7ae0f6ececed153f651f97 ]
We should return a negative error code upon failure in
riscv_hartid_to_cpuid() instead of NR_CPUS. This is also
aligned with all uses of riscv_hartid_to_cpuid() which
expect negative error code upon failure.
Fixes: 6825c7a80f18 ("RISC-V: Add logical CPU indexing for RISC-V")
Fixes: f99fb607fb2b ("RISC-V: Use Linux logical CPU number instead of hartid")
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index ea028d9e0d24..d44567490d91 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -54,7 +54,7 @@ int riscv_hartid_to_cpuid(int hartid)
return i;
pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
- return i;
+ return -ENOENT;
}
void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 472497d0bdae890a896013332a0b673f9acdf2bf ]
If selftest and reset are performed at the same time, the phy
loopback setting may be still in enable state after the reset,
and device cannot link up. So fix this issue by disabling phy
loopback before phy_start().
Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index e89820702540..c194bba187d6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -255,6 +255,8 @@ void hclge_mac_start_phy(struct hclge_dev *hdev)
if (!phydev)
return;
+ phy_loopback(phydev, false);
+
phy_start(phydev);
}
--
2.30.2
From: Md Haris Iqbal <[email protected]>
[ Upstream commit 1056ad829ec43f9b705b507c2093b05e2088b0b7 ]
In case none of the paths are in connected state, the function
rtrs_clt_query returns an error. In such a case, error out since the
values in the rtrs_attrs structure would be garbage.
Fixes: f7a7a5c228d45 ("block/rnbd: client: main functionality")
Signed-off-by: Md Haris Iqbal <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Jack Wang <[email protected]>
Signed-off-by: Gioh Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/rnbd/rnbd-clt.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
index ba334fe7626d..71b86fee81c2 100644
--- a/drivers/block/rnbd/rnbd-clt.c
+++ b/drivers/block/rnbd/rnbd-clt.c
@@ -679,7 +679,11 @@ static void remap_devs(struct rnbd_clt_session *sess)
return;
}
- rtrs_clt_query(sess->rtrs, &attrs);
+ err = rtrs_clt_query(sess->rtrs, &attrs);
+ if (err) {
+ pr_err("rtrs_clt_query(\"%s\"): %d\n", sess->sessname, err);
+ return;
+ }
mutex_lock(&sess->lock);
sess->max_io_size = attrs.max_io_size;
@@ -1211,7 +1215,11 @@ find_and_get_or_create_sess(const char *sessname,
err = PTR_ERR(sess->rtrs);
goto wake_up_and_put;
}
- rtrs_clt_query(sess->rtrs, &attrs);
+
+ err = rtrs_clt_query(sess->rtrs, &attrs);
+ if (err)
+ goto close_rtrs;
+
sess->max_io_size = attrs.max_io_size;
sess->queue_depth = attrs.queue_depth;
--
2.30.2
From: Baptiste Lepers <[email protected]>
[ Upstream commit f8f7e0fb22b2e75be55f2f0c13e229e75b0eac07 ]
Fix a misplaced barrier in call_decode. The struct rpc_rqst is modified
as follows by xprt_complete_rqst:
req->rq_private_buf.len = copied;
/* Ensure all writes are done before we update */
/* req->rq_reply_bytes_recvd */
smp_wmb();
req->rq_reply_bytes_recvd = copied;
And currently read as follows by call_decode:
smp_rmb(); // misplaced
if (!req->rq_reply_bytes_recvd)
goto out;
req->rq_rcv_buf.len = req->rq_private_buf.len;
This patch places the smp_rmb after the if to ensure that
rq_reply_bytes_recvd and rq_private_buf.len are read in order.
Fixes: 9ba828861c56a ("SUNRPC: Don't try to parse incomplete RPC messages")
Signed-off-by: Baptiste Lepers <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/clnt.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 69d8843a26e0..4a0e8e458a9a 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2459,12 +2459,6 @@ call_decode(struct rpc_task *task)
task->tk_flags &= ~RPC_CALL_MAJORSEEN;
}
- /*
- * Ensure that we see all writes made by xprt_complete_rqst()
- * before it changed req->rq_reply_bytes_recvd.
- */
- smp_rmb();
-
/*
* Did we ever call xprt_complete_rqst()? If not, we should assume
* the message is incomplete.
@@ -2473,6 +2467,11 @@ call_decode(struct rpc_task *task)
if (!req->rq_reply_bytes_recvd)
goto out;
+ /* Ensure that we see all writes made by xprt_complete_rqst()
+ * before it changed req->rq_reply_bytes_recvd.
+ */
+ smp_rmb();
+
req->rq_rcv_buf.len = req->rq_private_buf.len;
trace_rpc_xdr_recvfrom(task, &req->rq_rcv_buf);
--
2.30.2
From: Can Guo <[email protected]>
[ Upstream commit 637822e63b79ee8a729f7ba2645a26cf5a524ee4 ]
During ufs system suspend, leaving rpm_dev_flush_recheck_work running or
pending is risky because concurrency may happen between system
suspend/resume and runtime resume routine. Fix this by cancelling
rpm_dev_flush_recheck_work synchronously during system suspend.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 51dd905bd2f6 ("scsi: ufs: Fix WriteBooster flush during runtime suspend")
Reviewed-by: Daejun Park <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index d1900ea31b0d..96f9c81d42b2 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8819,6 +8819,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
if (!hba || !hba->is_powered)
return 0;
+ cancel_delayed_work_sync(&hba->rpm_dev_flush_recheck_work);
+
if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==
hba->curr_dev_pwr_mode) &&
(ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl) ==
--
2.30.2
From: Kees Cook <[email protected]>
[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ]
An out of bounds write happens when setting the default power state.
KASAN sees this as:
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
==================================================================
BUG: KASAN: slab-out-of-bounds in
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157
CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x18/0x239
kasan_report+0x170/0x1a8
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
radeon_atombios_get_power_modes+0x144/0x1888 [radeon]
radeon_pm_init+0x1019/0x1904 [radeon]
rs690_init+0x76e/0x84a [radeon]
radeon_device_init+0x1c1a/0x21e5 [radeon]
radeon_driver_load_kms+0xf5/0x30b [radeon]
drm_dev_register+0x255/0x4a0 [drm]
radeon_pci_probe+0x246/0x2f6 [radeon]
pci_device_probe+0x1aa/0x294
really_probe+0x30e/0x850
driver_probe_device+0xe6/0x135
device_driver_attach+0xc1/0xf8
__driver_attach+0x13f/0x146
bus_for_each_dev+0xfa/0x146
bus_add_driver+0x2b3/0x447
driver_register+0x242/0x2c1
do_one_initcall+0x149/0x2fd
do_init_module+0x1ae/0x573
load_module+0x4dee/0x5cca
__do_sys_finit_module+0xf1/0x140
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Without KASAN, this will manifest later when the kernel attempts to
allocate memory that was stomped, since it collides with the inline slab
freelist pointer:
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
RIP: 0010:kfree+0x115/0x230
Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7
RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246
RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d
RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80
RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000
R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0
Call Trace:
__free_fdtable+0x16/0x1f
put_files_struct+0x81/0x9b
do_exit+0x433/0x94d
do_group_exit+0xa6/0xa6
__x64_sys_exit_group+0xf/0xf
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe80ef64bea
Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0.
RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea
RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0
R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0
Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ...
Use a valid power_state index when initializing the "flags" and "misc"
and "misc2" fields.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Reported-by: Erhard F. <[email protected]>
Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)")
Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 5d2591725189..96e80b0eca04 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2256,10 +2256,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
rdev->pm.default_power_state_index = state_index - 1;
rdev->pm.power_state[state_index - 1].default_clock_mode =
&rdev->pm.power_state[state_index - 1].clock_info[0];
- rdev->pm.power_state[state_index].flags &=
+ rdev->pm.power_state[state_index - 1].flags &=
~RADEON_PM_STATE_SINGLE_DISPLAY_ONLY;
- rdev->pm.power_state[state_index].misc = 0;
- rdev->pm.power_state[state_index].misc2 = 0;
+ rdev->pm.power_state[state_index - 1].misc = 0;
+ rdev->pm.power_state[state_index - 1].misc2 = 0;
}
return state_index;
}
--
2.30.2
From: Md Haris Iqbal <[email protected]>
[ Upstream commit 80d43cbd46155744ee450d2476ee4fcf2917ae9b ]
The member queue_depth in the structure rnbd_clt_session is read from the
rtrs client side using the function rtrs_clt_query, which in turn is read
from the rtrs_clt structure. It should really be of type size_t.
Fixes: 90426e89f54db ("block/rnbd: client: private header with client structs and functions")
Signed-off-by: Md Haris Iqbal <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Gioh Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/rnbd/rnbd-clt.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
index b193d5904050..2941e3862b9c 100644
--- a/drivers/block/rnbd/rnbd-clt.h
+++ b/drivers/block/rnbd/rnbd-clt.h
@@ -79,7 +79,7 @@ struct rnbd_clt_session {
DECLARE_BITMAP(cpu_queues_bm, NR_CPUS);
int __percpu *cpu_rr; /* per-cpu var for CPU round-robin */
atomic_t busy;
- int queue_depth;
+ size_t queue_depth;
u32 max_io_size;
struct blk_mq_tag_set tag_set;
struct mutex lock; /* protects state and devs_list */
--
2.30.2
From: Brendan Jackman <[email protected]>
[ Upstream commit 2a30f9440640c418bcfbea9b2b344d268b58e0a2 ]
One of our benchmarks running in (Google-internal) CI pushes data
through the ringbuf faster htan than userspace is able to consume
it. In this case it seems we're actually able to get >INT_MAX entries
in a single ring_buffer__consume() call. ASAN detected that cnt
overflows in this case.
Fix by using 64-bit counter internally and then capping the result to
INT_MAX before converting to the int return type. Do the same for
the ring_buffer__poll().
Fixes: bf99c936f947 (libbpf: Add BPF ring buffer support)
Signed-off-by: Brendan Jackman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/ringbuf.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/tools/lib/bpf/ringbuf.c b/tools/lib/bpf/ringbuf.c
index 06cd709a3453..86c31c787fb9 100644
--- a/tools/lib/bpf/ringbuf.c
+++ b/tools/lib/bpf/ringbuf.c
@@ -202,9 +202,11 @@ static inline int roundup_len(__u32 len)
return (len + 7) / 8 * 8;
}
-static int ringbuf_process_ring(struct ring* r)
+static int64_t ringbuf_process_ring(struct ring* r)
{
- int *len_ptr, len, err, cnt = 0;
+ int *len_ptr, len, err;
+ /* 64-bit to avoid overflow in case of extreme application behavior */
+ int64_t cnt = 0;
unsigned long cons_pos, prod_pos;
bool got_new_data;
void *sample;
@@ -244,12 +246,14 @@ done:
}
/* Consume available ring buffer(s) data without event polling.
- * Returns number of records consumed across all registered ring buffers, or
- * negative number if any of the callbacks return error.
+ * Returns number of records consumed across all registered ring buffers (or
+ * INT_MAX, whichever is less), or negative number if any of the callbacks
+ * return error.
*/
int ring_buffer__consume(struct ring_buffer *rb)
{
- int i, err, res = 0;
+ int64_t err, res = 0;
+ int i;
for (i = 0; i < rb->ring_cnt; i++) {
struct ring *ring = &rb->rings[i];
@@ -259,18 +263,24 @@ int ring_buffer__consume(struct ring_buffer *rb)
return err;
res += err;
}
+ if (res > INT_MAX)
+ return INT_MAX;
return res;
}
/* Poll for available data and consume records, if any are available.
- * Returns number of records consumed, or negative number, if any of the
- * registered callbacks returned error.
+ * Returns number of records consumed (or INT_MAX, whichever is less), or
+ * negative number, if any of the registered callbacks returned error.
*/
int ring_buffer__poll(struct ring_buffer *rb, int timeout_ms)
{
- int i, cnt, err, res = 0;
+ int i, cnt;
+ int64_t err, res = 0;
cnt = epoll_wait(rb->epoll_fd, rb->events, rb->ring_cnt, timeout_ms);
+ if (cnt < 0)
+ return -errno;
+
for (i = 0; i < cnt; i++) {
__u32 ring_id = rb->events[i].data.fd;
struct ring *ring = &rb->rings[ring_id];
@@ -280,5 +290,7 @@ int ring_buffer__poll(struct ring_buffer *rb, int timeout_ms)
return err;
res += err;
}
- return cnt < 0 ? -errno : res;
+ if (res > INT_MAX)
+ return INT_MAX;
+ return res;
}
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ]
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.
However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.
I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.
This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_statefuns.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index d4d268b8b8aa..b65bdaa84228 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1933,7 +1933,8 @@ static enum sctp_disposition sctp_sf_do_dupcook_b(
sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
SCTP_STATE(SCTP_STATE_ESTABLISHED));
- SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
+ if (asoc->state < SCTP_STATE_ESTABLISHED)
+ SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMERS_START, SCTP_NULL());
repl = sctp_make_cookie_ack(new_asoc, chunk);
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit 643001b47adc844ae33510c4bb93c236667008a3 ]
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).
My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961.
Fixes: fb7516d42478e ("enic: add sw timestamp support")
Signed-off-by: Lv Yunlong <[email protected]>
Acked-by: Govindarajulu Varadarajan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index fb269d587b74..548d8095c0a7 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -768,7 +768,7 @@ static inline int enic_queue_wq_skb_encap(struct enic *enic, struct vnic_wq *wq,
return err;
}
-static inline void enic_queue_wq_skb(struct enic *enic,
+static inline int enic_queue_wq_skb(struct enic *enic,
struct vnic_wq *wq, struct sk_buff *skb)
{
unsigned int mss = skb_shinfo(skb)->gso_size;
@@ -814,6 +814,7 @@ static inline void enic_queue_wq_skb(struct enic *enic,
wq->to_use = buf->next;
dev_kfree_skb(skb);
}
+ return err;
}
/* netif_tx_lock held, process context with BHs disabled, or BH */
@@ -857,7 +858,8 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
return NETDEV_TX_BUSY;
}
- enic_queue_wq_skb(enic, wq, skb);
+ if (enic_queue_wq_skb(enic, wq, skb))
+ goto error;
if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS)
netif_tx_stop_queue(txq);
@@ -865,6 +867,7 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
if (!netdev_xmit_more() || netif_xmit_stopped(txq))
vnic_wq_doorbell(wq);
+error:
spin_unlock(&enic->wq_lock[txq_map]);
return NETDEV_TX_OK;
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ]
This extension breaks when trying to delete rules, add a new revision to
fix this.
Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/netfilter/xt_SECMARK.h | 6 ++
net/netfilter/xt_SECMARK.c | 88 ++++++++++++++++++-----
2 files changed, 75 insertions(+), 19 deletions(-)
diff --git a/include/uapi/linux/netfilter/xt_SECMARK.h b/include/uapi/linux/netfilter/xt_SECMARK.h
index 1f2a708413f5..beb2cadba8a9 100644
--- a/include/uapi/linux/netfilter/xt_SECMARK.h
+++ b/include/uapi/linux/netfilter/xt_SECMARK.h
@@ -20,4 +20,10 @@ struct xt_secmark_target_info {
char secctx[SECMARK_SECCTX_MAX];
};
+struct xt_secmark_target_info_v1 {
+ __u8 mode;
+ char secctx[SECMARK_SECCTX_MAX];
+ __u32 secid;
+};
+
#endif /*_XT_SECMARK_H_target */
diff --git a/net/netfilter/xt_SECMARK.c b/net/netfilter/xt_SECMARK.c
index 75625d13e976..498a0bf6f044 100644
--- a/net/netfilter/xt_SECMARK.c
+++ b/net/netfilter/xt_SECMARK.c
@@ -24,10 +24,9 @@ MODULE_ALIAS("ip6t_SECMARK");
static u8 mode;
static unsigned int
-secmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
+secmark_tg(struct sk_buff *skb, const struct xt_secmark_target_info_v1 *info)
{
u32 secmark = 0;
- const struct xt_secmark_target_info *info = par->targinfo;
switch (mode) {
case SECMARK_MODE_SEL:
@@ -41,7 +40,7 @@ secmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
return XT_CONTINUE;
}
-static int checkentry_lsm(struct xt_secmark_target_info *info)
+static int checkentry_lsm(struct xt_secmark_target_info_v1 *info)
{
int err;
@@ -73,15 +72,15 @@ static int checkentry_lsm(struct xt_secmark_target_info *info)
return 0;
}
-static int secmark_tg_check(const struct xt_tgchk_param *par)
+static int
+secmark_tg_check(const char *table, struct xt_secmark_target_info_v1 *info)
{
- struct xt_secmark_target_info *info = par->targinfo;
int err;
- if (strcmp(par->table, "mangle") != 0 &&
- strcmp(par->table, "security") != 0) {
+ if (strcmp(table, "mangle") != 0 &&
+ strcmp(table, "security") != 0) {
pr_info_ratelimited("only valid in \'mangle\' or \'security\' table, not \'%s\'\n",
- par->table);
+ table);
return -EINVAL;
}
@@ -116,25 +115,76 @@ static void secmark_tg_destroy(const struct xt_tgdtor_param *par)
}
}
-static struct xt_target secmark_tg_reg __read_mostly = {
- .name = "SECMARK",
- .revision = 0,
- .family = NFPROTO_UNSPEC,
- .checkentry = secmark_tg_check,
- .destroy = secmark_tg_destroy,
- .target = secmark_tg,
- .targetsize = sizeof(struct xt_secmark_target_info),
- .me = THIS_MODULE,
+static int secmark_tg_check_v0(const struct xt_tgchk_param *par)
+{
+ struct xt_secmark_target_info *info = par->targinfo;
+ struct xt_secmark_target_info_v1 newinfo = {
+ .mode = info->mode,
+ };
+ int ret;
+
+ memcpy(newinfo.secctx, info->secctx, SECMARK_SECCTX_MAX);
+
+ ret = secmark_tg_check(par->table, &newinfo);
+ info->secid = newinfo.secid;
+
+ return ret;
+}
+
+static unsigned int
+secmark_tg_v0(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ const struct xt_secmark_target_info *info = par->targinfo;
+ struct xt_secmark_target_info_v1 newinfo = {
+ .secid = info->secid,
+ };
+
+ return secmark_tg(skb, &newinfo);
+}
+
+static int secmark_tg_check_v1(const struct xt_tgchk_param *par)
+{
+ return secmark_tg_check(par->table, par->targinfo);
+}
+
+static unsigned int
+secmark_tg_v1(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ return secmark_tg(skb, par->targinfo);
+}
+
+static struct xt_target secmark_tg_reg[] __read_mostly = {
+ {
+ .name = "SECMARK",
+ .revision = 0,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = secmark_tg_check_v0,
+ .destroy = secmark_tg_destroy,
+ .target = secmark_tg_v0,
+ .targetsize = sizeof(struct xt_secmark_target_info),
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "SECMARK",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = secmark_tg_check_v1,
+ .destroy = secmark_tg_destroy,
+ .target = secmark_tg_v1,
+ .targetsize = sizeof(struct xt_secmark_target_info_v1),
+ .usersize = offsetof(struct xt_secmark_target_info_v1, secid),
+ .me = THIS_MODULE,
+ },
};
static int __init secmark_tg_init(void)
{
- return xt_register_target(&secmark_tg_reg);
+ return xt_register_targets(secmark_tg_reg, ARRAY_SIZE(secmark_tg_reg));
}
static void __exit secmark_tg_exit(void)
{
- xt_unregister_target(&secmark_tg_reg);
+ xt_unregister_targets(secmark_tg_reg, ARRAY_SIZE(secmark_tg_reg));
}
module_init(secmark_tg_init);
--
2.30.2
From: Xuan Zhuo <[email protected]>
[ Upstream commit ac31565c21937eee9117e43c9cd34f557f6f1cb8 ]
When desc->len is equal to chunk_size, it is legal. But when the
xp_aligned_validate_desc() got chunk_end from desc->addr + desc->len
pointing to the next chunk during the check, it caused the check to
fail.
This problem was first introduced in bbff2f321a86 ("xsk: new descriptor
addressing scheme"). Later in 2b43470add8c ("xsk: Introduce AF_XDP buffer
allocation API") this piece of code was moved into the new function called
xp_aligned_validate_desc(). This function was then moved into xsk_queue.h
via 26062b185eee ("xsk: Explicitly inline functions and move definitions").
Fixes: bbff2f321a86 ("xsk: new descriptor addressing scheme")
Signed-off-by: Xuan Zhuo <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/xdp/xsk_queue.h | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index ef6de0fb4e31..be9fd5a72011 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -126,13 +126,12 @@ static inline bool xskq_cons_read_addr_unchecked(struct xsk_queue *q, u64 *addr)
static inline bool xp_aligned_validate_desc(struct xsk_buff_pool *pool,
struct xdp_desc *desc)
{
- u64 chunk, chunk_end;
+ u64 chunk;
- chunk = xp_aligned_extract_addr(pool, desc->addr);
- chunk_end = xp_aligned_extract_addr(pool, desc->addr + desc->len);
- if (chunk != chunk_end)
+ if (desc->len > pool->chunk_size)
return false;
+ chunk = xp_aligned_extract_addr(pool, desc->addr);
if (chunk >= pool->addrs_cnt)
return false;
--
2.30.2
From: Marc Zyngier <[email protected]>
[ Upstream commit 9eb563cdabe1d583c262042d5d44cc256f644543 ]
In subsequent patches we'll allow an FIQ handler to be registered, and
FIQ exceptions will need to be triaged very similarly to IRQ exceptions.
So that we can reuse the existing logic, this patch factors the IRQ
triage logic out into macros that can be reused for FIQ.
The macros are named to follow the elX_foo_handler scheme used by the C
exception handlers. For consistency with other top-level exception
handlers, the kernel_entry/kernel_exit logic is not moved into the
macros. As FIQ will use a different C handler, this handler name is
provided as an argument to the macros.
There should be no functional change as a result of this patch.
Signed-off-by: Marc Zyngier <[email protected]>
[Mark: rework macros, commit message, rebase before DAIF rework]
Signed-off-by: Mark Rutland <[email protected]>
Tested-by: Hector Martin <[email protected]>
Cc: James Morse <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/entry.S | 80 +++++++++++++++++++++------------------
1 file changed, 43 insertions(+), 37 deletions(-)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 2da82c139e1c..a9644da545c7 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -464,8 +464,8 @@ tsk .req x28 // current thread_info
/*
* Interrupt handling.
*/
- .macro irq_handler
- ldr_l x1, handle_arch_irq
+ .macro irq_handler, handler:req
+ ldr_l x1, \handler
mov x0, sp
irq_stack_entry
blr x1
@@ -504,6 +504,45 @@ alternative_endif
#endif
.endm
+ .macro el1_interrupt_handler, handler:req
+ gic_prio_irq_setup pmr=x20, tmp=x1
+ enable_da_f
+
+ mov x0, sp
+ bl enter_el1_irq_or_nmi
+
+ irq_handler \handler
+
+#ifdef CONFIG_PREEMPTION
+ ldr x24, [tsk, #TSK_TI_PREEMPT] // get preempt count
+alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+ /*
+ * DA_F were cleared at start of handling. If anything is set in DAIF,
+ * we come back from an NMI, so skip preemption
+ */
+ mrs x0, daif
+ orr x24, x24, x0
+alternative_else_nop_endif
+ cbnz x24, 1f // preempt count != 0 || NMI return path
+ bl arm64_preempt_schedule_irq // irq en/disable is done inside
+1:
+#endif
+
+ mov x0, sp
+ bl exit_el1_irq_or_nmi
+ .endm
+
+ .macro el0_interrupt_handler, handler:req
+ gic_prio_irq_setup pmr=x20, tmp=x0
+ user_exit_irqoff
+ enable_da_f
+
+ tbz x22, #55, 1f
+ bl do_el0_irq_bp_hardening
+1:
+ irq_handler \handler
+ .endm
+
.text
/*
@@ -633,32 +672,7 @@ SYM_CODE_END(el1_sync)
.align 6
SYM_CODE_START_LOCAL_NOALIGN(el1_irq)
kernel_entry 1
- gic_prio_irq_setup pmr=x20, tmp=x1
- enable_da_f
-
- mov x0, sp
- bl enter_el1_irq_or_nmi
-
- irq_handler
-
-#ifdef CONFIG_PREEMPTION
- ldr x24, [tsk, #TSK_TI_PREEMPT] // get preempt count
-alternative_if ARM64_HAS_IRQ_PRIO_MASKING
- /*
- * DA_F were cleared at start of handling. If anything is set in DAIF,
- * we come back from an NMI, so skip preemption
- */
- mrs x0, daif
- orr x24, x24, x0
-alternative_else_nop_endif
- cbnz x24, 1f // preempt count != 0 || NMI return path
- bl arm64_preempt_schedule_irq // irq en/disable is done inside
-1:
-#endif
-
- mov x0, sp
- bl exit_el1_irq_or_nmi
-
+ el1_interrupt_handler handle_arch_irq
kernel_exit 1
SYM_CODE_END(el1_irq)
@@ -698,15 +712,7 @@ SYM_CODE_END(el0_error_compat)
SYM_CODE_START_LOCAL_NOALIGN(el0_irq)
kernel_entry 0
el0_irq_naked:
- gic_prio_irq_setup pmr=x20, tmp=x0
- user_exit_irqoff
- enable_da_f
-
- tbz x22, #55, 1f
- bl do_el0_irq_bp_hardening
-1:
- irq_handler
-
+ el0_interrupt_handler handle_arch_irq
b ret_to_user
SYM_CODE_END(el0_irq)
--
2.30.2
From: Kees Cook <[email protected]>
[ Upstream commit c69f27137a38d24301a6b659454a91ad85dff4aa ]
Avoid leaving a hanging pre-allocated clock_info if last mode is
invalid, and avoid heap corruption if no valid modes are found.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Fixes: 6991b8f2a319 ("drm/radeon/kms: fix segfault in pm rework")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 96e80b0eca04..aca6e5cfae53 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2126,11 +2126,14 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
- rdev->pm.power_state[state_index].clock_info =
- kcalloc(1, sizeof(struct radeon_pm_clock_info),
- GFP_KERNEL);
+ /* avoid memory leaks from invalid modes or unknown frev. */
+ if (!rdev->pm.power_state[state_index].clock_info) {
+ rdev->pm.power_state[state_index].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info),
+ GFP_KERNEL);
+ }
if (!rdev->pm.power_state[state_index].clock_info)
- return state_index;
+ goto out;
rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
switch (frev) {
@@ -2249,8 +2252,15 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
break;
}
}
+out:
+ /* free any unused clock_info allocation. */
+ if (state_index && state_index < num_modes) {
+ kfree(rdev->pm.power_state[state_index].clock_info);
+ rdev->pm.power_state[state_index].clock_info = NULL;
+ }
+
/* last mode is usually default */
- if (rdev->pm.default_power_state_index == -1) {
+ if (state_index && rdev->pm.default_power_state_index == -1) {
rdev->pm.power_state[state_index - 1].type =
POWER_STATE_TYPE_DEFAULT;
rdev->pm.default_power_state_index = state_index - 1;
--
2.30.2
From: Ramesh Babu B <[email protected]>
[ Upstream commit 4c7a94286ef7ac7301d633f17519fb1bb89d7550 ]
In promiscuous mode Receive All bit is set in GMAC packet filter register,
but outside promiscuous mode Receive All bit is not cleared,
which resulted in all network packets are received when toggle (ON/OFF)
the promiscuous mode.
Fixes: e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable")
Signed-off-by: Ramesh Babu B <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ced6d76a0d85..16c538cfaf59 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -617,6 +617,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
value &= ~GMAC_PACKET_FILTER_PCF;
value &= ~GMAC_PACKET_FILTER_PM;
value &= ~GMAC_PACKET_FILTER_PR;
+ value &= ~GMAC_PACKET_FILTER_RA;
if (dev->flags & IFF_PROMISC) {
/* VLAN Tag Filter Fail Packets Queuing */
if (hw->vlan_fail_q_en) {
--
2.30.2
From: Mark Rutland <[email protected]>
[ Upstream commit 4d6a38da8e79e94cbd1344aa90876f0f805db705 ]
Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1"
on the command line hits a warning during kernel entry, due to the way
we manipulate the PMR.
Early in the entry sequence, we call lockdep_hardirqs_off() to inform
lockdep that interrupts have been masked (as the HW sets DAIF wqhen
entering an exception). Architecturally PMR_EL1 is not affected by
exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in
the exception entry sequence, so early in exception entry the PMR can
indicate that interrupts are unmasked even though they are masked by
DAIF.
If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that
interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the
exception entry paths, and hence lockdep_hardirqs_off() will WARN() that
something is amiss.
We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during
exception entry so that kernel code sees a consistent environment. We
must also update local_daif_inherit() to undo this, as currently only
touches DAIF. For other paths, local_daif_restore() will update both
DAIF and the PMR. With this done, we can remove the existing special
cases which set this later in the entry code.
We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with
local_daif_save(), as this will warn if it ever encounters
(GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This
matches the gic_prio_kentry_setup that we have to retain for
ret_to_user.
The original splat from Zenghui's report was:
| DEBUG_LOCKS_WARN_ON(!irqs_disabled())
| WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8
| Modules linked in:
| CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ #463
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : lockdep_hardirqs_off+0xd4/0xe8
| lr : lockdep_hardirqs_off+0xd4/0xe8
| sp : ffff80002a39bad0
| pmr_save: 000000e0
| x29: ffff80002a39bad0 x28: ffff0000de214bc0
| x27: ffff0000de1c0400 x26: 000000000049b328
| x25: 0000000000406f30 x24: ffff0000de1c00a0
| x23: 0000000020400005 x22: ffff8000105f747c
| x21: 0000000096000044 x20: 0000000000498ef9
| x19: ffff80002a39bc88 x18: ffffffffffffffff
| x17: 0000000000000000 x16: ffff800011c61eb0
| x15: ffff800011700a88 x14: 0720072007200720
| x13: 0720072007200720 x12: 0720072007200720
| x11: 0720072007200720 x10: 0720072007200720
| x9 : ffff80002a39bad0 x8 : ffff80002a39bad0
| x7 : ffff8000119f0800 x6 : c0000000ffff7fff
| x5 : ffff8000119f07a8 x4 : 0000000000000001
| x3 : 9bcdab23f2432800 x2 : ffff800011730538
| x1 : 9bcdab23f2432800 x0 : 0000000000000000
| Call trace:
| lockdep_hardirqs_off+0xd4/0xe8
| enter_from_kernel_mode.isra.5+0x7c/0xa8
| el1_abort+0x24/0x100
| el1_sync_handler+0x80/0xd0
| el1_sync+0x6c/0x100
| __arch_clear_user+0xc/0x90
| load_elf_binary+0x9fc/0x1450
| bprm_execve+0x404/0x880
| kernel_execve+0x180/0x188
| call_usermodehelper_exec_async+0xdc/0x158
| ret_from_fork+0x10/0x18
Fixes: 23529049c684 ("arm64: entry: fix non-NMI user<->kernel transitions")
Fixes: 7cd1ea1010ac ("arm64: entry: fix non-NMI kernel<->kernel transitions")
Fixes: f0cd5ac1e4c5 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
Fixes: 2a9b3e6ac69a ("arm64: entry: fix EL1 debug transitions")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Rutland <[email protected]>
Reported-by: Zenghui Yu <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/daifflags.h | 3 +++
arch/arm64/kernel/entry-common.c | 17 -----------------
arch/arm64/kernel/entry.S | 15 ++-------------
3 files changed, 5 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index 1c26d7baa67f..cfdde3a56805 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -131,6 +131,9 @@ static inline void local_daif_inherit(struct pt_regs *regs)
if (interrupts_enabled(regs))
trace_hardirqs_on();
+ if (system_uses_irq_prio_masking())
+ gic_write_pmr(regs->pmr_save);
+
/*
* We can't use local_daif_restore(regs->pstate) here as
* system_has_prio_mask_debugging() won't restore the I bit if it can
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 70e0a7591245..ec120ed18faf 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -178,14 +178,6 @@ static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
{
unsigned long far = read_sysreg(far_el1);
- /*
- * The CPU masked interrupts, and we are leaving them masked during
- * do_debug_exception(). Update PMR as if we had called
- * local_daif_mask().
- */
- if (system_uses_irq_prio_masking())
- gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
arm64_enter_el1_dbg(regs);
do_debug_exception(far, esr, regs);
arm64_exit_el1_dbg(regs);
@@ -350,9 +342,6 @@ static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */
unsigned long far = read_sysreg(far_el1);
- if (system_uses_irq_prio_masking())
- gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
enter_from_user_mode();
do_debug_exception(far, esr, regs);
local_daif_restore(DAIF_PROCCTX_NOIRQ);
@@ -360,9 +349,6 @@ static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
static void noinstr el0_svc(struct pt_regs *regs)
{
- if (system_uses_irq_prio_masking())
- gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
enter_from_user_mode();
do_el0_svc(regs);
}
@@ -437,9 +423,6 @@ static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
static void noinstr el0_svc_compat(struct pt_regs *regs)
{
- if (system_uses_irq_prio_masking())
- gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
enter_from_user_mode();
do_el0_svc_compat(regs);
}
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index a9644da545c7..60d399123360 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -259,6 +259,8 @@ alternative_else_nop_endif
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
mrs_s x20, SYS_ICC_PMR_EL1
str x20, [sp, #S_PMR_SAVE]
+ mov x20, #GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET
+ msr_s SYS_ICC_PMR_EL1, x20
alternative_else_nop_endif
/* Re-enable tag checking (TCO set on exception entry) */
@@ -495,17 +497,7 @@ alternative_endif
#endif
.endm
- .macro gic_prio_irq_setup, pmr:req, tmp:req
-#ifdef CONFIG_ARM64_PSEUDO_NMI
- alternative_if ARM64_HAS_IRQ_PRIO_MASKING
- orr \tmp, \pmr, #GIC_PRIO_PSR_I_SET
- msr_s SYS_ICC_PMR_EL1, \tmp
- alternative_else_nop_endif
-#endif
- .endm
-
.macro el1_interrupt_handler, handler:req
- gic_prio_irq_setup pmr=x20, tmp=x1
enable_da_f
mov x0, sp
@@ -533,7 +525,6 @@ alternative_else_nop_endif
.endm
.macro el0_interrupt_handler, handler:req
- gic_prio_irq_setup pmr=x20, tmp=x0
user_exit_irqoff
enable_da_f
@@ -719,7 +710,6 @@ SYM_CODE_END(el0_irq)
SYM_CODE_START_LOCAL(el1_error)
kernel_entry 1
mrs x1, esr_el1
- gic_prio_kentry_setup tmp=x2
enable_dbg
mov x0, sp
bl do_serror
@@ -730,7 +720,6 @@ SYM_CODE_START_LOCAL(el0_error)
kernel_entry 0
el0_error_naked:
mrs x25, esr_el1
- gic_prio_kentry_setup tmp=x2
user_exit_irqoff
enable_dbg
mov x0, sp
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit 74e579bf231a337ab3786d59e64bc94f45ca7b3f ]
In writable and !referenced case, the result value should be
SCAN_LACK_REFERENCED_PAGE for trace_mm_collapse_huge_page_isolate()
instead of default 0 (SCAN_FAIL) here.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 7d2eba0557c1 ("mm: add tracepoint for scanning pages")
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Ebru Akagunduz <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Rik van Riel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/khugepaged.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index abab394c4206..a6238118ac4c 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -714,17 +714,17 @@ next:
if (pte_write(pteval))
writable = true;
}
- if (likely(writable)) {
- if (likely(referenced)) {
- result = SCAN_SUCCEED;
- trace_mm_collapse_huge_page_isolate(page, none_or_zero,
- referenced, writable, result);
- return 1;
- }
- } else {
+
+ if (unlikely(!writable)) {
result = SCAN_PAGE_RO;
+ } else if (unlikely(!referenced)) {
+ result = SCAN_LACK_REFERENCED_PAGE;
+ } else {
+ result = SCAN_SUCCEED;
+ trace_mm_collapse_huge_page_isolate(page, none_or_zero,
+ referenced, writable, result);
+ return 1;
}
-
out:
release_pte_pages(pte, _pte, compound_pagelist);
trace_mm_collapse_huge_page_isolate(page, none_or_zero,
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit da56388c4397878a65b74f7fe97760f5aa7d316b ]
A rare out of memory error would prevent removal of the reserve map region
for a page. hugetlb_fix_reserve_counts() handles this rare case to avoid
dangling with incorrect counts. Unfortunately, hugepage_subpool_get_pages
and hugetlb_acct_memory could possibly fail too. We should correctly
handle these cases.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Feilong Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/hugetlb.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 573f1a0183be..900851a4f914 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -745,13 +745,20 @@ void hugetlb_fix_reserve_counts(struct inode *inode)
{
struct hugepage_subpool *spool = subpool_inode(inode);
long rsv_adjust;
+ bool reserved = false;
rsv_adjust = hugepage_subpool_get_pages(spool, 1);
- if (rsv_adjust) {
+ if (rsv_adjust > 0) {
struct hstate *h = hstate_inode(inode);
- hugetlb_acct_memory(h, 1);
+ if (!hugetlb_acct_memory(h, 1))
+ reserved = true;
+ } else if (!rsv_adjust) {
+ reserved = true;
}
+
+ if (!reserved)
+ pr_warn("hugetlb: Huge Page Reserved count may go negative.\n");
}
/*
--
2.30.2
From: Can Guo <[email protected]>
[ Upstream commit ce4f62f9dd8cf43ac044045ed598a0b80ef33890 ]
If spm_lvl is set to 0 or 1, when system suspend kicks start and HBA is
runtime active, system suspend may just bail without doing anything (the
fast path), leaving other contexts still running, e.g., clock gating and
clock scaling. When system resume kicks start, concurrency can happen
between ufshcd_resume() and these contexts, leading to various stability
issues.
Add a check against HBA's runtime state and allowing fast path only if HBA
is runtime suspended, otherwise let system suspend go ahead call
ufshcd_suspend(). This will guarantee that these contexts are stopped by
either runtime suspend or system suspend.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0b257734344a ("scsi: ufs: optimize system suspend handling")
Reviewed-by: Daejun Park <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 96f9c81d42b2..08d4d40c510e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8825,6 +8825,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
hba->curr_dev_pwr_mode) &&
(ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl) ==
hba->uic_link_state) &&
+ pm_runtime_suspended(hba->dev) &&
!hba->dev_info.b_rpm_dev_flush_capable)
goto out;
--
2.30.2
From: Nobuhiro Iwamatsu <[email protected]>
[ Upstream commit 204756f016726a380bafe619438ed979088bd04a ]
rx8130 wday specifies the bit position, not BCD.
Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-ds1307.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 9f5f54ca039d..07a9cc91671b 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -295,7 +295,11 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
t->tm_min = bcd2bin(regs[DS1307_REG_MIN] & 0x7f);
tmp = regs[DS1307_REG_HOUR] & 0x3f;
t->tm_hour = bcd2bin(tmp);
- t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
+ /* rx8130 is bit position, not BCD */
+ if (ds1307->type == rx_8130)
+ t->tm_wday = fls(regs[DS1307_REG_WDAY] & 0x7f);
+ else
+ t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
t->tm_mday = bcd2bin(regs[DS1307_REG_MDAY] & 0x3f);
tmp = regs[DS1307_REG_MONTH] & 0x1f;
t->tm_mon = bcd2bin(tmp) - 1;
@@ -342,7 +346,11 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
regs[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
regs[DS1307_REG_MIN] = bin2bcd(t->tm_min);
regs[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
- regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
+ /* rx8130 is bit position, not BCD */
+ if (ds1307->type == rx_8130)
+ regs[DS1307_REG_WDAY] = 1 << t->tm_wday;
+ else
+ regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
regs[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
regs[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
--
2.30.2
From: Cong Wang <[email protected]>
[ Upstream commit 8621436671f3a4bba5db57482e1ee604708bf1eb ]
syzbot is able to setup kTLS on an SMC socket which coincidentally
uses sk_user_data too. Later, kTLS treats it as psock so triggers a
refcnt warning. The root cause is that smc_setsockopt() simply calls
TCP setsockopt() which includes TCP_ULP. I do not think it makes
sense to setup kTLS on top of SMC sockets, so we should just disallow
this setup.
It is hard to find a commit to blame, but we can apply this patch
since the beginning of TCP_ULP.
Reported-and-tested-by: [email protected]
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Cc: John Fastabend <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5dd4faaf7d6e..030d7f30b13f 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -2147,6 +2147,9 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
struct smc_sock *smc;
int val, rc;
+ if (level == SOL_TCP && optname == TCP_ULP)
+ return -EOPNOTSUPP;
+
smc = smc_sk(sk);
/* generic setsockopts reaching us here always apply to the
@@ -2171,7 +2174,6 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
if (rc || smc->use_fallback)
goto out;
switch (optname) {
- case TCP_ULP:
case TCP_FASTOPEN:
case TCP_FASTOPEN_CONNECT:
case TCP_FASTOPEN_KEY:
--
2.30.2
From: Fernando Fernandez Mancera <[email protected]>
[ Upstream commit cf754ae331be7cc192b951756a1dd031e9ed978a ]
When dumping the ethtool information from all the interfaces, the
netlink reply should contain the NLM_F_MULTI flag. This flag allows
userspace tools to identify that multiple messages are expected.
Link: https://bugzilla.redhat.com/1953847
Fixes: 365f9ae4ee36 ("ethtool: fix genlmsg_put() failure handling in ethnl_default_dumpit()")
Signed-off-by: Fernando Fernandez Mancera <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ethtool/netlink.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index 50d3c8896f91..25a55086d2b6 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -384,7 +384,8 @@ static int ethnl_default_dump_one(struct sk_buff *skb, struct net_device *dev,
int ret;
ehdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq,
- ðtool_genl_family, 0, ctx->ops->reply_cmd);
+ ðtool_genl_family, NLM_F_MULTI,
+ ctx->ops->reply_cmd);
if (!ehdr)
return -EMSGSIZE;
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 5e024c325406470d1165a09c6feaf8ec897936be ]
Do not assume that the tcph->doff field is correct when parsing for TCP
options, skb_header_pointer() might fail to fetch these bits.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nfnetlink_osf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/netfilter/nfnetlink_osf.c b/net/netfilter/nfnetlink_osf.c
index 916a3c7f9eaf..79fbf37291f3 100644
--- a/net/netfilter/nfnetlink_osf.c
+++ b/net/netfilter/nfnetlink_osf.c
@@ -186,6 +186,8 @@ static const struct tcphdr *nf_osf_hdr_ctx_init(struct nf_osf_hdr_ctx *ctx,
ctx->optp = skb_header_pointer(skb, ip_hdrlen(skb) +
sizeof(struct tcphdr), ctx->optsize, opts);
+ if (!ctx->optp)
+ return NULL;
}
return tcp;
--
2.30.2
From: Maciej Żenczykowski <[email protected]>
[ Upstream commit 2c16db6c92b0ee4aa61e88366df82169e83c3f7e ]
Android userspace has been using TCA_KIND with a char[IFNAMESIZ]
many-null-terminated buffer containing the string 'bpf'.
This works on 4.19 and ceases to work on 5.10.
I'm not entirely sure what fixes tag to use, but I think the issue
was likely introduced in the below mentioned 5.4 commit.
Reported-by: Nucca Chen <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: David Ahern <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: Jiri Pirko <[email protected]>
Fixes: 62794fc4fbf5 ("net_sched: add max len check for TCA_KIND")
Change-Id: I66dc281f165a2858fc29a44869a270a2d698a82b
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/nlattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/nlattr.c b/lib/nlattr.c
index 74019c8ebf6b..fe60f9ae9db1 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -816,7 +816,7 @@ int nla_strcmp(const struct nlattr *nla, const char *str)
int attrlen = nla_len(nla);
int d;
- if (attrlen > 0 && buf[attrlen - 1] == '\0')
+ while (attrlen > 0 && buf[attrlen - 1] == '\0')
attrlen--;
d = attrlen - len;
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit c89a384e2551c692a9fe60d093fd7080f50afc51 ]
When removing rmap_item from stable tree, STABLE_FLAG of rmap_item is
cleared with head reserved. So the following scenario might happen: For
ksm page with rmap_item1:
cmp_and_merge_page
stable_node->head = &migrate_nodes;
remove_rmap_item_from_tree, but head still equal to stable_node;
try_to_merge_with_ksm_page failed;
return;
For the same ksm page with rmap_item2, stable node migration succeed this
time. The stable_node->head does not equal to migrate_nodes now. For ksm
page with rmap_item1 again:
cmp_and_merge_page
stable_node->head != &migrate_nodes && rmap_item->head == stable_node
return;
We would miss the rmap_item for stable_node and might result in failed
rmap_walk_ksm(). Fix this by set rmap_item->head to NULL when rmap_item
is removed from stable tree.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4146d2d673e8 ("ksm: make !merge_across_nodes migration safe")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/ksm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/ksm.c b/mm/ksm.c
index 0960750bb316..25b8362a4f89 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -794,6 +794,7 @@ static void remove_rmap_item_from_tree(struct rmap_item *rmap_item)
stable_node->rmap_hlist_len--;
put_anon_vma(rmap_item->anon_vma);
+ rmap_item->head = NULL;
rmap_item->address &= PAGE_MASK;
} else if (rmap_item->address & UNSTABLE_FLAG) {
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit 1775c7ddacfcea29051c67409087578f8f4d751b ]
Fixes: 878dabb64117 ("ceph: don't return -ESTALE if there's still an open file")
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/export.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index e088843a7734..baa6368bece5 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -178,8 +178,10 @@ static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino)
return ERR_CAST(inode);
/* We need LINK caps to reliably check i_nlink */
err = ceph_do_getattr(inode, CEPH_CAP_LINK_SHARED, false);
- if (err)
+ if (err) {
+ iput(inode);
return ERR_PTR(err);
+ }
/* -ESTALE if inode as been unlinked and no file is open */
if ((inode->i_nlink == 0) && (atomic_read(&inode->i_count) == 1)) {
iput(inode);
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 85dfd816fabfc16e71786eda0a33a7046688b5b0 ]
Release object name if userdata allocation fails.
Fixes: b131c96496b3 ("netfilter: nf_tables: add userdata support for nft_object")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 2e76935db2c8..7bf7bfa0c7d9 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6015,9 +6015,9 @@ err_obj_ht:
INIT_LIST_HEAD(&obj->list);
return err;
err_trans:
- kfree(obj->key.name);
-err_userdata:
kfree(obj->udata);
+err_userdata:
+ kfree(obj->key.name);
err_strdup:
if (obj->ops->destroy)
obj->ops->destroy(&ctx, obj);
--
2.30.2
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 4376ea42db8bfcac2bc3a30bba93917244a8c2d4 ]
This patch adds the missing can_rx_offload_del(), that must be called
if mcp251xfd_register() fails.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 096d818c167e..68ff931993c2 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2870,10 +2870,12 @@ static int mcp251xfd_probe(struct spi_device *spi)
err = mcp251xfd_register(priv);
if (err)
- goto out_free_candev;
+ goto out_can_rx_offload_del;
return 0;
+ out_can_rx_offload_del:
+ can_rx_offload_del(&priv->offload);
out_free_candev:
spi->max_speed_hz = priv->spi_max_speed_hz_orig;
--
2.30.2
From: Frieder Schrempf <[email protected]>
[ Upstream commit 03c427147b2d3e503af258711af4fc792b89b0af ]
Since 8ce8c0abcba3 the driver queues work via priv->restart_work when
resuming after suspend, even when the interface was not previously
enabled. This causes a null dereference error as the workqueue is only
allocated and initialized in mcp251x_open().
To fix this we move the workqueue init to mcp251x_can_probe() as there
is no reason to do it later and repeat it whenever mcp251x_open() is
called.
Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Frieder Schrempf <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
[mkl: fix error handling in mcp251x_stop()]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/mcp251x.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 42c3046fa304..89897a2d41fa 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -956,8 +956,6 @@ static int mcp251x_stop(struct net_device *net)
priv->force_quit = 1;
free_irq(spi->irq, priv);
- destroy_workqueue(priv->wq);
- priv->wq = NULL;
mutex_lock(&priv->mcp_lock);
@@ -1224,24 +1222,15 @@ static int mcp251x_open(struct net_device *net)
goto out_close;
}
- priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
- 0);
- if (!priv->wq) {
- ret = -ENOMEM;
- goto out_clean;
- }
- INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
- INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler);
-
ret = mcp251x_hw_wake(spi);
if (ret)
- goto out_free_wq;
+ goto out_free_irq;
ret = mcp251x_setup(net, spi);
if (ret)
- goto out_free_wq;
+ goto out_free_irq;
ret = mcp251x_set_normal_mode(spi);
if (ret)
- goto out_free_wq;
+ goto out_free_irq;
can_led_event(net, CAN_LED_EVENT_OPEN);
@@ -1250,9 +1239,7 @@ static int mcp251x_open(struct net_device *net)
return 0;
-out_free_wq:
- destroy_workqueue(priv->wq);
-out_clean:
+out_free_irq:
free_irq(spi->irq, priv);
mcp251x_hw_sleep(spi);
out_close:
@@ -1373,6 +1360,15 @@ static int mcp251x_can_probe(struct spi_device *spi)
if (ret)
goto out_clk;
+ priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
+ 0);
+ if (!priv->wq) {
+ ret = -ENOMEM;
+ goto out_clk;
+ }
+ INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
+ INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler);
+
priv->spi = spi;
mutex_init(&priv->mcp_lock);
@@ -1417,6 +1413,8 @@ static int mcp251x_can_probe(struct spi_device *spi)
return 0;
error_probe:
+ destroy_workqueue(priv->wq);
+ priv->wq = NULL;
mcp251x_power_enable(priv->power, 0);
out_clk:
@@ -1438,6 +1436,9 @@ static int mcp251x_can_remove(struct spi_device *spi)
mcp251x_power_enable(priv->power, 0);
+ destroy_workqueue(priv->wq);
+ priv->wq = NULL;
+
clk_disable_unprepare(priv->clk);
free_candev(net);
--
2.30.2
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit e04b2cfe61072c7966e1a5fb73dd1feb30c206ed ]
The m_can_start_xmit() function checks if the cdev->tx_skb is NULL and
returns with NETDEV_TX_BUSY in case tx_sbk is not NULL.
There is a race condition in the m_can_tx_work_queue(), where first
the skb is send to the driver and then the case tx_sbk is set to NULL.
A TX complete IRQ might come in between and wake the queue, which
results in tx_skb not being cleared yet.
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Tested-by: Torin Cooper-Bennun <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/m_can/m_can.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 6f0bf5db885c..62bcef4bb95f 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1466,6 +1466,8 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
int i;
int putidx;
+ cdev->tx_skb = NULL;
+
/* Generate ID field for TX buffer Element */
/* Common to all supported M_CAN versions */
if (cf->can_id & CAN_EFF_FLAG) {
@@ -1582,7 +1584,6 @@ static void m_can_tx_work_queue(struct work_struct *ws)
tx_work);
m_can_tx_handler(cdev);
- cdev->tx_skb = NULL;
}
static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
--
2.30.2
From: Quentin Perret <[email protected]>
[ Upstream commit 6d2f8909a5fabb73fe2a63918117943986c39b6c ]
Util-clamp places tasks in different buckets based on their clamp values
for performance reasons. However, the size of buckets is currently
computed using a rounding division, which can lead to an off-by-one
error in some configurations.
For instance, with 20 buckets, the bucket size will be 1024/20=51. A
task with a clamp of 1024 will be mapped to bucket id 1024/51=20. Sadly,
correct indexes are in range [0,19], hence leading to an out of bound
memory access.
Clamp the bucket id to fix the issue.
Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcounting")
Suggested-by: Qais Yousef <[email protected]>
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 3c3554d9ee50..57b236251884 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -936,7 +936,7 @@ DEFINE_STATIC_KEY_FALSE(sched_uclamp_used);
static inline unsigned int uclamp_bucket_id(unsigned int clamp_value)
{
- return clamp_value / UCLAMP_BUCKET_DELTA;
+ return min_t(unsigned int, clamp_value / UCLAMP_BUCKET_DELTA, UCLAMP_BUCKETS - 1);
}
static inline unsigned int uclamp_none(enum uclamp_id clamp_id)
--
2.30.2
From: Odin Ugedal <[email protected]>
[ Upstream commit 0258bdfaff5bd13c4d2383150b7097aecd6b6d82 ]
This fixes an issue where old load on a cfs_rq is not properly decayed,
resulting in strange behavior where fairness can decrease drastically.
Real workloads with equally weighted control groups have ended up
getting a respective 99% and 1%(!!) of cpu time.
When an idle task is attached to a cfs_rq by attaching a pid to a cgroup,
the old load of the task is attached to the new cfs_rq and sched_entity by
attach_entity_cfs_rq. If the task is then moved to another cpu (and
therefore cfs_rq) before being enqueued/woken up, the load will be moved
to cfs_rq->removed from the sched_entity. Such a move will happen when
enforcing a cpuset on the task (eg. via a cgroup) that force it to move.
The load will however not be removed from the task_group itself, making
it look like there is a constant load on that cfs_rq. This causes the
vruntime of tasks on other sibling cfs_rq's to increase faster than they
are supposed to; causing severe fairness issues. If no other task is
started on the given cfs_rq, and due to the cpuset it would not happen,
this load would never be properly unloaded. With this patch the load
will be properly removed inside update_blocked_averages. This also
applies to tasks moved to the fair scheduling class and moved to another
cpu, and this path will also fix that. For fork, the entity is queued
right away, so this problem does not affect that.
This applies to cases where the new process is the first in the cfs_rq,
issue introduced 3d30544f0212 ("sched/fair: Apply more PELT fixes"), and
when there has previously been load on the cgroup but the cgroup was
removed from the leaflist due to having null PELT load, indroduced
in 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing
path").
For a simple cgroup hierarchy (as seen below) with two equally weighted
groups, that in theory should get 50/50 of cpu time each, it often leads
to a load of 60/40 or 70/30.
parent/
cg-1/
cpu.weight: 100
cpuset.cpus: 1
cg-2/
cpu.weight: 100
cpuset.cpus: 1
If the hierarchy is deeper (as seen below), while keeping cg-1 and cg-2
equally weighted, they should still get a 50/50 balance of cpu time.
This however sometimes results in a balance of 10/90 or 1/99(!!) between
the task groups.
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 18568 1.1 0.0 3684 100 pts/12 R+ 13:36 0:00 stress --cpu 1
root 18580 99.3 0.0 3684 100 pts/12 R+ 13:36 0:09 stress --cpu 1
parent/
cg-1/
cpu.weight: 100
sub-group/
cpu.weight: 1
cpuset.cpus: 1
cg-2/
cpu.weight: 100
sub-group/
cpu.weight: 10000
cpuset.cpus: 1
This can be reproduced by attaching an idle process to a cgroup and
moving it to a given cpuset before it wakes up. The issue is evident in
many (if not most) container runtimes, and has been reproduced
with both crun and runc (and therefore docker and all its "derivatives"),
and with both cgroup v1 and v2.
Fixes: 3d30544f0212 ("sched/fair: Apply more PELT fixes")
Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Signed-off-by: Odin Ugedal <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index c80d1a039d19..1ad0e52487f6 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -10840,16 +10840,22 @@ static void propagate_entity_cfs_rq(struct sched_entity *se)
{
struct cfs_rq *cfs_rq;
+ list_add_leaf_cfs_rq(cfs_rq_of(se));
+
/* Start to propagate at parent */
se = se->parent;
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- if (cfs_rq_throttled(cfs_rq))
- break;
+ if (!cfs_rq_throttled(cfs_rq)){
+ update_load_avg(cfs_rq, se, UPDATE_TG);
+ list_add_leaf_cfs_rq(cfs_rq);
+ continue;
+ }
- update_load_avg(cfs_rq, se, UPDATE_TG);
+ if (list_add_leaf_cfs_rq(cfs_rq))
+ break;
}
}
#else
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 31d82c2c787d5cf65fedd35ebbc0c1bd95c1a679 ]
When vzalloc() returns NULL to sha_regions, no error return code of
kexec_calculate_store_digests() is assigned. To fix this bug, ret is
assigned with -ENOMEM in this case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a43cac0d9dc2 ("kexec: split kexec_file syscall code to kexec_file.c")
Signed-off-by: Jia-Ju Bai <[email protected]>
Reported-by: TOTE Robot <[email protected]>
Acked-by: Baoquan He <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kexec_file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 7825adcc5efc..aea9104265f2 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -740,8 +740,10 @@ static int kexec_calculate_store_digests(struct kimage *image)
sha_region_sz = KEXEC_SEGMENT_MAX * sizeof(struct kexec_sha_region);
sha_regions = vzalloc(sha_region_sz);
- if (!sha_regions)
+ if (!sha_regions) {
+ ret = -ENOMEM;
goto out_free_desc;
+ }
desc->tfm = tfm;
--
2.30.2
From: David Hildenbrand <[email protected]>
[ Upstream commit 97f61c8f44ec9020708b97a51188170add4f3084 ]
Patch series "kernel/resource: make walk_system_ram_res() and walk_mem_res() search the whole tree", v2.
Playing with kdump+virtio-mem I noticed that kexec_file_load() does not
consider System RAM added via dax/kmem and virtio-mem when preparing the
elf header for kdump. Looking into the details, the logic used in
walk_system_ram_res() and walk_mem_res() seems to be outdated.
walk_system_ram_range() already does the right thing, let's change
walk_system_ram_res() and walk_mem_res(), and clean up.
Loading a kdump kernel via "kexec -p -s" ... will result in the kdump
kernel to also dump dax/kmem and virtio-mem added System RAM now.
Note: kexec-tools on x86-64 also have to be updated to consider this
memory in the kexec_load() case when processing /proc/iomem.
This patch (of 3):
It used to be true that we can have system RAM (IORESOURCE_SYSTEM_RAM |
IORESOURCE_BUSY) only on the first level in the resource tree. However,
this is no longer holds for driver-managed system RAM (i.e., added via
dax/kmem and virtio-mem), which gets added on lower levels, for example,
inside device containers.
We have two users of walk_system_ram_res(), which currently only
consideres the first level:
a) kernel/kexec_file.c:kexec_walk_resources() -- We properly skip
IORESOURCE_SYSRAM_DRIVER_MANAGED resources via
locate_mem_hole_callback(), so even after this change, we won't be
placing kexec images onto dax/kmem and virtio-mem added memory. No
change.
b) arch/x86/kernel/crash.c:fill_up_crash_elf_data() -- we're currently
not adding relevant ranges to the crash elf header, resulting in them
not getting dumped via kdump.
This change fixes loading a crashkernel via kexec_file_load() and
including dax/kmem and virtio-mem added System RAM in the crashdump on
x86-64. Note that e.g,, arm64 relies on memblock data and, therefore,
always considers all added System RAM already.
Let's find all IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY resources, making
the function behave like walk_system_ram_range().
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ebf71552bb0e ("virtio-mem: Add parent resource for all added "System RAM"")
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Acked-by: Baoquan He <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/resource.c b/kernel/resource.c
index 3ae2f56cc79d..88a0ed866777 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -450,7 +450,7 @@ int walk_system_ram_res(u64 start, u64 end, void *arg,
{
unsigned long flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
- return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, true,
+ return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, false,
arg, func);
}
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit f4bf74d82915708208bc9d0c9bd3f769f56bfbec ]
Currently the pde_is_permanent() check is being run on root multiple times
rather than on the next proc directory entry. This looks like a
copy-paste error. Fix this by replacing root with next.
Addresses-Coverity: ("Copy-paste error")
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d919b33dafb3 ("proc: faster open/read/close with "permanent" files")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Reviewed-by: Alexey Dobriyan <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/proc/generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 6c0a05f55d6b..09e4d8a499a3 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -754,7 +754,7 @@ int remove_proc_subtree(const char *name, struct proc_dir_entry *parent)
while (1) {
next = pde_subdir_first(de);
if (next) {
- if (unlikely(pde_is_permanent(root))) {
+ if (unlikely(pde_is_permanent(next))) {
write_unlock(&proc_subdir_lock);
WARN(1, "removing permanent /proc entry '%s/%s'",
next->parent->name, next->name);
--
2.30.2
From: Pavel Tatashin <[email protected]>
[ Upstream commit 83c02c23d0747a7bdcd71f99a538aacec94b146c ]
When pages are isolated in check_and_migrate_movable_pages() we skip
compound number of pages at a time. However, as Jason noted, it is not
necessary correct that pages[i] corresponds to the pages that we
skipped. This is because it is possible that the addresses in this
range had split_huge_pmd()/split_huge_pud(), and these functions do not
update the compound page metadata.
The problem can be reproduced if something like this occurs:
1. User faulted huge pages.
2. split_huge_pmd() was called for some reason
3. User has unmapped some sub-pages in the range
4. User tries to longterm pin the addresses.
The resulting pages[i] might end-up having pages which are not compound
size page aligned.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: aa712399c1e8 ("mm/gup: speed up check_and_migrate_cma_pages() on huge page")
Signed-off-by: Pavel Tatashin <[email protected]>
Reported-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/gup.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/mm/gup.c b/mm/gup.c
index 054ff923d3d9..e10807c4c46b 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -1562,26 +1562,23 @@ static long check_and_migrate_cma_pages(struct mm_struct *mm,
unsigned int gup_flags)
{
unsigned long i;
- unsigned long step;
bool drain_allow = true;
bool migrate_allow = true;
LIST_HEAD(cma_page_list);
long ret = nr_pages;
+ struct page *prev_head, *head;
struct migration_target_control mtc = {
.nid = NUMA_NO_NODE,
.gfp_mask = GFP_USER | __GFP_MOVABLE | __GFP_NOWARN,
};
check_again:
- for (i = 0; i < nr_pages;) {
-
- struct page *head = compound_head(pages[i]);
-
- /*
- * gup may start from a tail page. Advance step by the left
- * part.
- */
- step = compound_nr(head) - (pages[i] - head);
+ prev_head = NULL;
+ for (i = 0; i < nr_pages; i++) {
+ head = compound_head(pages[i]);
+ if (head == prev_head)
+ continue;
+ prev_head = head;
/*
* If we get a page from the CMA zone, since we are going to
* be pinning these entries, we might as well move them out
@@ -1605,8 +1602,6 @@ check_again:
}
}
}
-
- i += step;
}
if (!list_empty(&cma_page_list)) {
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit a54754ec9891830ba548e2010c889e3c8146e449 ]
Number of buckets being stored in 32bit variables, we have to
ensure that no overflows occur in nft_hash_buckets()
syzbot injected a size == 0x40000000 and reported:
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 29539 Comm: syz-executor.4 Not tainted 5.12.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
__roundup_pow_of_two include/linux/log2.h:57 [inline]
nft_hash_buckets net/netfilter/nft_set_hash.c:411 [inline]
nft_hash_estimate.cold+0x19/0x1e net/netfilter/nft_set_hash.c:652
nft_select_set_ops net/netfilter/nf_tables_api.c:3586 [inline]
nf_tables_newset+0xe62/0x3110 net/netfilter/nf_tables_api.c:4322
nfnetlink_rcv_batch+0xa09/0x24b0 net/netfilter/nfnetlink.c:488
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:612 [inline]
nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:630
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_set_hash.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c
index 4d3f147e8d8d..d7083bcb20e8 100644
--- a/net/netfilter/nft_set_hash.c
+++ b/net/netfilter/nft_set_hash.c
@@ -393,9 +393,17 @@ static void nft_rhash_destroy(const struct nft_set *set)
(void *)set);
}
+/* Number of buckets is stored in u32, so cap our result to 1U<<31 */
+#define NFT_MAX_BUCKETS (1U << 31)
+
static u32 nft_hash_buckets(u32 size)
{
- return roundup_pow_of_two(size * 4 / 3);
+ u64 val = div_u64((u64)size * 4, 3);
+
+ if (val >= NFT_MAX_BUCKETS)
+ return NFT_MAX_BUCKETS;
+
+ return roundup_pow_of_two(val);
}
static bool nft_rhash_estimate(const struct nft_set_desc *desc, u32 features,
--
2.30.2
From: Magnus Karlsson <[email protected]>
[ Upstream commit ae4393dfd472b194c90d75d2123105fb5ed59b04 ]
Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke
XDP support in the i40e driver. That commit was fixing a sparse error
in the code by introducing a new variable xdp_res instead of
overloading this into the skb pointer. The problem is that the code
later uses the skb pointer in if statements and these where not
extended to also test for the new xdp_res variable. Fix this by adding
the correct tests for xdp_res in these places.
The skb pointer was used to store the result of the XDP program by
overloading the results in the error pointer
ERR_PTR(-result). Therefore, the allocation failure test that used to
only test for !skb now need to be extended to also consider !xdp_res.
i40e_cleanup_headers() had a check that based on the skb value being
an error pointer, i.e. a result from the XDP program != XDP_PASS, and
if so start to process a new packet immediately, instead of populating
skb fields and sending the skb to the stack. This check is not needed
anymore, since we have added an explicit test for xdp_res being set
and if so just do continue to pick the next packet from the NIC.
Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c")
Acked-by: Jesper Dangaard Brouer <[email protected]>
Tested-by: Jesper Dangaard Brouer <[email protected]>
Reported-by: Jesper Dangaard Brouer <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 62b439232fa5..011f484606a3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1810,10 +1810,6 @@ static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
union i40e_rx_desc *rx_desc)
{
- /* XDP packets use error pointer so abort at this point */
- if (IS_ERR(skb))
- return true;
-
/* ERR_MASK will only have valid bits if EOP set, and
* what we are doing here is actually checking
* I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
@@ -2426,7 +2422,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
}
/* exit if we failed to retrieve a buffer */
- if (!skb) {
+ if (!xdp_res && !skb) {
rx_ring->rx_stats.alloc_buff_failed++;
rx_buffer->pagecnt_bias++;
break;
@@ -2438,7 +2434,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
if (i40e_is_non_eop(rx_ring, rx_desc, skb))
continue;
- if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
+ if (xdp_res || i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
skb = NULL;
continue;
}
--
2.30.2
From: Yunjian Wang <[email protected]>
[ Upstream commit 38318f23a7ef86a8b1862e5e8078c4de121960c3 ]
Currently the call to i40e_client_del_instance frees the object
pf->cinst, however pf->cinst->lan_info is being accessed after
the free. Fix this by adding the missing return.
Addresses-Coverity: ("Read from pointer after free")
Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events")
Signed-off-by: Yunjian Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_client.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c
index a2dba32383f6..32f3facbed1a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_client.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_client.c
@@ -375,6 +375,7 @@ void i40e_client_subtask(struct i40e_pf *pf)
clear_bit(__I40E_CLIENT_INSTANCE_OPENED,
&cdev->state);
i40e_client_del_instance(pf);
+ return;
}
}
}
--
2.30.2
From: Mateusz Palczewski <[email protected]>
[ Upstream commit 15395ec4685bd45a43d1b54b8fd9846b87e2c621 ]
Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.
Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 6 ++++--
drivers/net/ethernet/intel/i40e/i40e_common.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_type.h | 7 ++-----
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 1e960c3c7ef0..e84054fb8213 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1565,8 +1565,10 @@ enum i40e_aq_phy_type {
I40E_PHY_TYPE_25GBASE_LR = 0x22,
I40E_PHY_TYPE_25GBASE_AOC = 0x23,
I40E_PHY_TYPE_25GBASE_ACC = 0x24,
- I40E_PHY_TYPE_2_5GBASE_T = 0x30,
- I40E_PHY_TYPE_5GBASE_T = 0x31,
+ I40E_PHY_TYPE_2_5GBASE_T = 0x26,
+ I40E_PHY_TYPE_5GBASE_T = 0x27,
+ I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS = 0x30,
+ I40E_PHY_TYPE_5GBASE_T_LINK_STATUS = 0x31,
I40E_PHY_TYPE_MAX,
I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP = 0xFD,
I40E_PHY_TYPE_EMPTY = 0xFE,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index adc9e4fa4789..ba109073d605 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1154,8 +1154,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw)
break;
case I40E_PHY_TYPE_100BASE_TX:
case I40E_PHY_TYPE_1000BASE_T:
- case I40E_PHY_TYPE_2_5GBASE_T:
- case I40E_PHY_TYPE_5GBASE_T:
+ case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
+ case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
case I40E_PHY_TYPE_10GBASE_T:
media = I40E_MEDIA_TYPE_BASET;
break;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 13554706c180..5d48bc0c3f6c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -841,8 +841,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
10000baseT_Full);
break;
case I40E_PHY_TYPE_10GBASE_T:
- case I40E_PHY_TYPE_5GBASE_T:
- case I40E_PHY_TYPE_2_5GBASE_T:
+ case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+ case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
case I40E_PHY_TYPE_1000BASE_T:
case I40E_PHY_TYPE_100BASE_TX:
ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index c0bdc666f557..add67f7b73e8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -239,11 +239,8 @@ struct i40e_phy_info {
#define I40E_CAP_PHY_TYPE_25GBASE_ACC BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC + \
I40E_PHY_TYPE_OFFSET)
/* Offset for 2.5G/5G PHY Types value to bit number conversion */
-#define I40E_PHY_TYPE_OFFSET2 (-10)
-#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T + \
- I40E_PHY_TYPE_OFFSET2)
-#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T + \
- I40E_PHY_TYPE_OFFSET2)
+#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T)
+#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T)
#define I40E_HW_CAP_MAX_GPIO 30
/* Capabilities of a PF or a VF or the whole device */
struct i40e_hw_capabilities {
--
2.30.2
From: Vineet Gupta <[email protected]>
commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream.
We have NR_syscall syscalls from [0 .. NR_syscall-1].
However the check for invalid syscall number is "> NR_syscall" as
opposed to >=. This off-by-one error erronesously allows "NR_syscall"
to be treated as valid syscall causeing out-of-bounds access into
syscall-call table ensuing a crash (holes within syscall table have a
invalid-entry handler but this is beyond the array implementing the
table).
This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10
kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has
NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was
not handled as -ENOSYS but processed leading to a crash.
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48
Reported-by: Shahab Vahedi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/entry.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -177,7 +177,7 @@ tracesys:
; Do the Sys Call as we normally would.
; Validate the Sys Call number
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi tracesys_exit
@@ -255,7 +255,7 @@ ENTRY(EV_Trap)
;============ Normal syscall case
; syscall num shd not exceed the total system calls avail
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi .Lret_from_system_call
From: David Hildenbrand <[email protected]>
[ Upstream commit 3c9c797534364593b73ba6ab060a014af8934721 ]
It used to be true that we can have system RAM (IORESOURCE_SYSTEM_RAM |
IORESOURCE_BUSY) only on the first level in the resource tree. However,
this is no longer holds for driver-managed system RAM (i.e., added via
dax/kmem and virtio-mem), which gets added on lower levels, for example,
inside device containers.
IORESOURCE_SYSTEM_RAM is defined as IORESOURCE_MEM | IORESOURCE_SYSRAM and
just a special type of IORESOURCE_MEM.
The function walk_mem_res() only considers the first level and is used in
arch/x86/mm/ioremap.c:__ioremap_check_mem() only. We currently fail to
identify System RAM added by dax/kmem and virtio-mem as
"IORES_MAP_SYSTEM_RAM", for example, allowing for remapping of such
"normal RAM" in __ioremap_caller().
Let's find all IORESOURCE_MEM | IORESOURCE_BUSY resources, making the
function behave similar to walk_system_ram_res().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ebf71552bb0e ("virtio-mem: Add parent resource for all added "System RAM"")
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Brijesh Singh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/resource.c b/kernel/resource.c
index 88a0ed866777..817545ff80b9 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -463,7 +463,7 @@ int walk_mem_res(u64 start, u64 end, void *arg,
{
unsigned long flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, true,
+ return __walk_iomem_res_desc(start, end, flags, IORES_DESC_NONE, false,
arg, func);
}
--
2.30.2
From: Vladimir Isaev <[email protected]>
commit c5f756d8c6265ebb1736a7787231f010a3b782e5 upstream.
32-bit PAGE_MASK can not be used as a mask for physical addresses
when PAE is enabled. PAGE_MASK_PHYS must be used for physical
addresses instead of PAGE_MASK.
Without this, init gets SIGSEGV if pte_modify was called:
| potentially unexpected fatal signal 11.
| Path: /bin/busybox
| CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc5-00003-g1e43c377a79f-dirty
| Insn could not be fetched
| @No matching VMA found
| ECR: 0x00040000 EFA: 0x00000000 ERET: 0x00000000
| STAT: 0x80080082 [IE U ] BTA: 0x00000000
| SP: 0x5f9ffe44 FP: 0x00000000 BLK: 0xaf3d4
| LPS: 0x000d093e LPE: 0x000d0950 LPC: 0x00000000
| r00: 0x00000002 r01: 0x5f9fff14 r02: 0x5f9fff20
| ...
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Vladimir Isaev <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: [email protected]
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/include/asm/page.h | 12 ++++++++++++
arch/arc/include/asm/pgtable.h | 12 +++---------
arch/arc/include/uapi/asm/page.h | 1 -
arch/arc/mm/ioremap.c | 5 +++--
arch/arc/mm/tlb.c | 2 +-
5 files changed, 19 insertions(+), 13 deletions(-)
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -7,6 +7,18 @@
#include <uapi/asm/page.h>
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+#define PAGE_MASK_PHYS (0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#define PAGE_MASK_PHYS PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
#ifndef __ASSEMBLY__
#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE)
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -107,8 +107,8 @@
#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK (PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+ _PAGE_SPECIAL)
/* More Abbrevaited helpers */
#define PAGE_U_NONE __pgprot(___DEF)
#define PAGE_U_R __pgprot(___DEF | _PAGE_READ)
@@ -132,13 +132,7 @@
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
#define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK_PHYS | _PAGE_CACHEABLE)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
#define PAGE_MASK (~(PAGE_SIZE-1))
-
#endif /* _UAPI__ASM_ARC_PAGE_H */
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
unsigned long flags)
{
+ unsigned int off;
unsigned long vaddr;
struct vm_struct *area;
- phys_addr_t off, end;
+ phys_addr_t end;
pgprot_t prot = __pgprot(flags);
/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t p
/* Mappings have to be page-aligned */
off = paddr & ~PAGE_MASK;
- paddr &= PAGE_MASK;
+ paddr &= PAGE_MASK_PHYS;
size = PAGE_ALIGN(end + 1) - paddr;
/*
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -576,7 +576,7 @@ void update_mmu_cache(struct vm_area_str
pte_t *ptep)
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
- phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+ phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
struct page *page = pfn_to_page(pte_pfn(*ptep));
create_tlb(vma, vaddr, ptep);
From: Jaroslaw Gawin <[email protected]>
[ Upstream commit 61343e6da7810de81d6b826698946ae4f9070819 ]
When FEC mode was changed the link didn't know it because
the link was not reset and new parameters were not negotiated.
Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities'
to restart the link and make it run with the new settings.
Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G")
Signed-off-by: Jaroslaw Gawin <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 31d48a85cfaf..13554706c180 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1409,7 +1409,8 @@ static int i40e_set_fec_cfg(struct net_device *netdev, u8 fec_cfg)
memset(&config, 0, sizeof(config));
config.phy_type = abilities.phy_type;
- config.abilities = abilities.abilities;
+ config.abilities = abilities.abilities |
+ I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
config.phy_type_ext = abilities.phy_type_ext;
config.link_speed = abilities.link_speed;
config.eee_capability = abilities.eee_capability;
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit 578c18eff1627d6a911f08f4cf351eca41fdcc7d ]
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b64676b ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/subflow.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 6317b9bc8681..01a675fa2aa2 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -445,8 +445,7 @@ static void mptcp_sock_destruct(struct sock *sk)
* ESTABLISHED state and will not have the SOCK_DEAD flag.
* Both result in warnings from inet_sock_destruct.
*/
-
- if (sk->sk_state == TCP_ESTABLISHED) {
+ if ((1 << sk->sk_state) & (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
sk->sk_state = TCP_CLOSE;
WARN_ON_ONCE(sk->sk_socket);
sock_orphan(sk);
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit 3a1b9eaf727b4ab84ebf059e09c38fc6a53e5614 ]
Fields in struct f2fs_move_range won't change in f2fs_ioc_move_range(),
let's avoid copying this structure's data to userspace.
Signed-off-by: Chao Yu <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/file.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 9f857e5709b6..5c74b2997197 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2913,12 +2913,6 @@ static int __f2fs_ioc_move_range(struct file *filp,
range->pos_out, range->len);
mnt_drop_write_file(filp);
- if (err)
- goto err_out;
-
- if (copy_to_user((struct f2fs_move_range __user *)arg,
- &range, sizeof(range)))
- err = -EFAULT;
err_out:
fdput(dst);
return err;
--
2.30.2
From: Vladimir Isaev <[email protected]>
commit 1d5e4640e5df15252398c1b621f6bd432f2d7f17 upstream.
Commit 4af22ded0ecf ("arc: fix memory initialization for systems
with two memory banks") fixed highmem, but for the PAE case it causes
bug messages:
| BUG: Bad page state in process swapper pfn:80000
| page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0()
| raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
| raw: 00000000
| page dumped because: nonzero mapcount
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1
This is because the fix expects highmem to be always less than
lowmem and uses min_low_pfn as an upper zone border for highmem.
max_high_pfn should be ok for both highmem and highmem+PAE cases.
Fixes: 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks")
Signed-off-by: Vladimir Isaev <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: [email protected] #5.8 onwards
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/mm/init.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -158,7 +158,16 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
- max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+ /*
+ * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+ * For HIGHMEM without PAE max_high_pfn should be less than
+ * min_low_pfn to guarantee that these two regions don't overlap.
+ * For PAE case highmem is greater than lowmem, so it is natural
+ * to use max_high_pfn.
+ *
+ * In both cases, holes should be handled by pfn_valid().
+ */
+ max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
From: Pavel Tatashin <[email protected]>
[ Upstream commit f0f4463837da17a89d965dcbe4e411629dbcf308 ]
When migration failure occurs, we still pin pages, which means that we
may pin CMA movable pages which should never be the case.
Instead return an error without pinning pages when migration failure
happens.
No need to retry migrating, because migrate_pages() already retries 10
times.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/gup.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/mm/gup.c b/mm/gup.c
index e10807c4c46b..0fa8d88eb7ba 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -1563,7 +1563,6 @@ static long check_and_migrate_cma_pages(struct mm_struct *mm,
{
unsigned long i;
bool drain_allow = true;
- bool migrate_allow = true;
LIST_HEAD(cma_page_list);
long ret = nr_pages;
struct page *prev_head, *head;
@@ -1614,17 +1613,15 @@ check_again:
for (i = 0; i < nr_pages; i++)
put_page(pages[i]);
- if (migrate_pages(&cma_page_list, alloc_migration_target, NULL,
- (unsigned long)&mtc, MIGRATE_SYNC, MR_CONTIG_RANGE)) {
- /*
- * some of the pages failed migration. Do get_user_pages
- * without migration.
- */
- migrate_allow = false;
-
+ ret = migrate_pages(&cma_page_list, alloc_migration_target,
+ NULL, (unsigned long)&mtc, MIGRATE_SYNC,
+ MR_CONTIG_RANGE);
+ if (ret) {
if (!list_empty(&cma_page_list))
putback_movable_pages(&cma_page_list);
+ return ret > 0 ? -ENOMEM : ret;
}
+
/*
* We did migrate all the pages, Try to get the page references
* again migrating any new CMA pages which we failed to isolate
@@ -1634,7 +1631,7 @@ check_again:
pages, vmas, NULL,
gup_flags);
- if ((ret > 0) && migrate_allow) {
+ if (ret > 0) {
nr_pages = ret;
drain_allow = true;
goto check_again;
--
2.30.2
From: Pavel Tatashin <[email protected]>
[ Upstream commit 6e7f34ebb8d25d71ce7f4580ba3cbfc10b895580 ]
It is still possible that we pin movable CMA pages if there are
isolation errors and cma_page_list stays empty when we check again.
Check for isolation errors, and return success only when there are no
isolation errors, and cma_page_list is empty after checking.
Because isolation errors are transient, we retry indefinitely.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region")
Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/gup.c | 60 ++++++++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 26 deletions(-)
diff --git a/mm/gup.c b/mm/gup.c
index 0fa8d88eb7ba..c2826f3afe72 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -1561,8 +1561,8 @@ static long check_and_migrate_cma_pages(struct mm_struct *mm,
struct vm_area_struct **vmas,
unsigned int gup_flags)
{
- unsigned long i;
- bool drain_allow = true;
+ unsigned long i, isolation_error_count;
+ bool drain_allow;
LIST_HEAD(cma_page_list);
long ret = nr_pages;
struct page *prev_head, *head;
@@ -1573,6 +1573,8 @@ static long check_and_migrate_cma_pages(struct mm_struct *mm,
check_again:
prev_head = NULL;
+ isolation_error_count = 0;
+ drain_allow = true;
for (i = 0; i < nr_pages; i++) {
head = compound_head(pages[i]);
if (head == prev_head)
@@ -1584,25 +1586,35 @@ check_again:
* of the CMA zone if possible.
*/
if (is_migrate_cma_page(head)) {
- if (PageHuge(head))
- isolate_huge_page(head, &cma_page_list);
- else {
+ if (PageHuge(head)) {
+ if (!isolate_huge_page(head, &cma_page_list))
+ isolation_error_count++;
+ } else {
if (!PageLRU(head) && drain_allow) {
lru_add_drain_all();
drain_allow = false;
}
- if (!isolate_lru_page(head)) {
- list_add_tail(&head->lru, &cma_page_list);
- mod_node_page_state(page_pgdat(head),
- NR_ISOLATED_ANON +
- page_is_file_lru(head),
- thp_nr_pages(head));
+ if (isolate_lru_page(head)) {
+ isolation_error_count++;
+ continue;
}
+ list_add_tail(&head->lru, &cma_page_list);
+ mod_node_page_state(page_pgdat(head),
+ NR_ISOLATED_ANON +
+ page_is_file_lru(head),
+ thp_nr_pages(head));
}
}
}
+ /*
+ * If list is empty, and no isolation errors, means that all pages are
+ * in the correct zone.
+ */
+ if (list_empty(&cma_page_list) && !isolation_error_count)
+ return ret;
+
if (!list_empty(&cma_page_list)) {
/*
* drop the above get_user_pages reference.
@@ -1622,23 +1634,19 @@ check_again:
return ret > 0 ? -ENOMEM : ret;
}
- /*
- * We did migrate all the pages, Try to get the page references
- * again migrating any new CMA pages which we failed to isolate
- * earlier.
- */
- ret = __get_user_pages_locked(mm, start, nr_pages,
- pages, vmas, NULL,
- gup_flags);
-
- if (ret > 0) {
- nr_pages = ret;
- drain_allow = true;
- goto check_again;
- }
+ /* We unpinned pages before migration, pin them again */
+ ret = __get_user_pages_locked(mm, start, nr_pages, pages, vmas,
+ NULL, gup_flags);
+ if (ret <= 0)
+ return ret;
+ nr_pages = ret;
}
- return ret;
+ /*
+ * check again because pages were unpinned, and we also might have
+ * had isolation errors and need more pages to migrate.
+ */
+ goto check_again;
}
#else
static long check_and_migrate_cma_pages(struct mm_struct *mm,
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit 34f5e9b9d1990d286199084efa752530ee3d8297 ]
If the zone device page does not belong to un-addressable device memory,
the variable entry will be uninitialized and lead to indeterminate pte
entry ultimately. Fix this unexpected case and warn about it.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: df6ad69838fc ("mm/device-public-memory: device memory cache coherent with CPU")
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/migrate.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/mm/migrate.c b/mm/migrate.c
index 9d7ca1bd7f4b..7982256a5125 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -2914,6 +2914,13 @@ static void migrate_vma_insert_page(struct migrate_vma *migrate,
swp_entry = make_device_private_entry(page, vma->vm_flags & VM_WRITE);
entry = swp_entry_to_pte(swp_entry);
+ } else {
+ /*
+ * For now we only support migrating to un-addressable
+ * device memory.
+ */
+ pr_warn_once("Unsupported ZONE_DEVICE page type.\n");
+ goto abort;
}
} else {
entry = mk_pte(page, vma->vm_page_prot);
--
2.30.2
From: Axel Rasmussen <[email protected]>
commit 7ed9d238c7dbb1fdb63ad96a6184985151b0171c upstream.
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: cb658a453b93 ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY")
Signed-off-by: Axel Rasmussen <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2378,8 +2378,18 @@ static int shmem_mfill_atomic_pte(struct
pgoff_t offset, max_off;
ret = -ENOMEM;
- if (!shmem_inode_acct_block(inode, 1))
+ if (!shmem_inode_acct_block(inode, 1)) {
+ /*
+ * We may have got a page, returned -ENOENT triggering a retry,
+ * and now we find ourselves with -ENOMEM. Release the page, to
+ * avoid a BUG_ON in our caller.
+ */
+ if (unlikely(*pagep)) {
+ put_page(*pagep);
+ *pagep = NULL;
+ }
goto out;
+ }
if (!*pagep) {
page = shmem_alloc_page(gfp, info, pgoff);
From: Phillip Lougher <[email protected]>
commit d6e621de1fceb3b098ebf435ef7ea91ec4838a1a upstream.
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Phillip Lougher <[email protected]>
Reported-by: <[email protected]>
Reported-by: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/squashfs/file.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/squashfs/file.c
+++ b/fs/squashfs/file.c
@@ -211,11 +211,11 @@ failure:
* If the skip factor is limited in this way then the file will use multiple
* slots.
*/
-static inline int calculate_skip(int blocks)
+static inline int calculate_skip(u64 blocks)
{
- int skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
+ u64 skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
* SQUASHFS_META_INDEXES);
- return min(SQUASHFS_CACHED_BLKS - 1, skip + 1);
+ return min((u64) SQUASHFS_CACHED_BLKS - 1, skip + 1);
}
From: Peter Xu <[email protected]>
commit 22247efd822e6d263f3c8bd327f3f769aea9b1d9 upstream.
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
$ ./memfd_test hugetlbfs
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
mmap() didn't fail as expected
Aborted (core dumped)
I think it's probably because no one is really running the hugetlbfs test.
Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we
do in shmem_mmap(). Generalize a helper for that.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: Peter Xu <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Joel Fernandes (Google) <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hugetlbfs/inode.c | 5 +++++
include/linux/mm.h | 32 ++++++++++++++++++++++++++++++++
mm/shmem.c | 22 ++++------------------
3 files changed, 41 insertions(+), 18 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -131,6 +131,7 @@ static void huge_pagevec_release(struct
static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct inode *inode = file_inode(file);
+ struct hugetlbfs_inode_info *info = HUGETLBFS_I(inode);
loff_t len, vma_len;
int ret;
struct hstate *h = hstate_file(file);
@@ -146,6 +147,10 @@ static int hugetlbfs_file_mmap(struct fi
vma->vm_flags |= VM_HUGETLB | VM_DONTEXPAND;
vma->vm_ops = &hugetlb_vm_ops;
+ ret = seal_check_future_write(info->seals, vma);
+ if (ret)
+ return ret;
+
/*
* page based offset in vm_pgoff could be sufficiently large to
* overflow a loff_t when converted to byte offset. This can
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -3178,5 +3178,37 @@ unsigned long wp_shared_mapping_range(st
extern int sysctl_nr_trim_pages;
+/**
+ * seal_check_future_write - Check for F_SEAL_FUTURE_WRITE flag and handle it
+ * @seals: the seals to check
+ * @vma: the vma to operate on
+ *
+ * Check whether F_SEAL_FUTURE_WRITE is set; if so, do proper check/handling on
+ * the vma flags. Return 0 if check pass, or <0 for errors.
+ */
+static inline int seal_check_future_write(int seals, struct vm_area_struct *vma)
+{
+ if (seals & F_SEAL_FUTURE_WRITE) {
+ /*
+ * New PROT_WRITE and MAP_SHARED mmaps are not allowed when
+ * "future write" seal active.
+ */
+ if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
+ return -EPERM;
+
+ /*
+ * Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as
+ * MAP_SHARED and read-only, take care to not allow mprotect to
+ * revert protections on such mappings. Do this only for shared
+ * mappings. For private mappings, don't need to mask
+ * VM_MAYWRITE as we still want them to be COW-writable.
+ */
+ if (vma->vm_flags & VM_SHARED)
+ vma->vm_flags &= ~(VM_MAYWRITE);
+ }
+
+ return 0;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2256,25 +2256,11 @@ out_nomem:
static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
{
struct shmem_inode_info *info = SHMEM_I(file_inode(file));
+ int ret;
- if (info->seals & F_SEAL_FUTURE_WRITE) {
- /*
- * New PROT_WRITE and MAP_SHARED mmaps are not allowed when
- * "future write" seal active.
- */
- if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
- return -EPERM;
-
- /*
- * Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as
- * MAP_SHARED and read-only, take care to not allow mprotect to
- * revert protections on such mappings. Do this only for shared
- * mappings. For private mappings, don't need to mask
- * VM_MAYWRITE as we still want them to be COW-writable.
- */
- if (vma->vm_flags & VM_SHARED)
- vma->vm_flags &= ~(VM_MAYWRITE);
- }
+ ret = seal_check_future_write(info->seals, vma);
+ if (ret)
+ return ret;
/* arm64 - allow memory tagging on RAM-based files */
vma->vm_flags |= VM_MTE_ALLOWED;
From: Tejun Heo <[email protected]>
commit e9f4eee9a0023ba22db9560d4cc6ee63f933dae8 upstream.
When the weight of an active iocg is updated, weight_updated() is called
which in turn calls __propagate_weights() to update the active and inuse
weights so that the effective hierarchical weights are update accordingly.
The current implementation is incorrect for inner active nodes. For an
active leaf iocg, inuse can be any value between 1 and active and the
difference represents how much the iocg is donating. When weight is updated,
as long as inuse is clamped between 1 and the new weight, we're alright and
this is what __propagate_weights() currently implements.
However, that's not how an active inner node's inuse is set. An inner node's
inuse is solely determined by the ratio between the sums of inuse's and
active's of its children - ie. they're results of propagating the leaves'
active and inuse weights upwards. __propagate_weights() incorrectly applies
the same clamping as for a leaf when an active inner node's weight is
updated. Consider a hierarchy which looks like the following with saturating
workloads in AA and BB.
R
/ \
A B
| |
AA BB
1. For both A and B, active=100, inuse=100, hwa=0.5, hwi=0.5.
2. echo 200 > A/io.weight
3. __propagate_weights() update A's active to 200 and leave inuse at 100 as
it's already between 1 and the new active, making A:active=200,
A:inuse=100. As R's active_sum is updated along with A's active,
A:hwa=2/3, B:hwa=1/3. However, because the inuses didn't change, the
hwi's remain unchanged at 0.5.
4. The weight of A is now twice that of B but AA and BB still have the same
hwi of 0.5 and thus are doing the same amount of IOs.
Fix it by making __propgate_weights() always calculate the inuse of an
active inner iocg based on the ratio of child_inuse_sum to child_active_sum.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Dan Schatzberg <[email protected]>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: [email protected] # v5.4+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-iocost.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -1023,7 +1023,17 @@ static void __propagate_weights(struct i
lockdep_assert_held(&ioc->lock);
- inuse = clamp_t(u32, inuse, 1, active);
+ /*
+ * For an active leaf node, its inuse shouldn't be zero or exceed
+ * @active. An active internal node's inuse is solely determined by the
+ * inuse to active ratio of its children regardless of @inuse.
+ */
+ if (list_empty(&iocg->active_list) && iocg->child_active_sum) {
+ inuse = DIV64_U64_ROUND_UP(active * iocg->child_inuse_sum,
+ iocg->child_active_sum);
+ } else {
+ inuse = clamp_t(u32, inuse, 1, active);
+ }
iocg->last_inuse = iocg->inuse;
if (save)
@@ -1040,7 +1050,7 @@ static void __propagate_weights(struct i
/* update the level sums */
parent->child_active_sum += (s32)(active - child->active);
parent->child_inuse_sum += (s32)(inuse - child->inuse);
- /* apply the udpates */
+ /* apply the updates */
child->active = active;
child->inuse = inuse;
From: Peter Collingbourne <[email protected]>
commit 37a8024d265564eba680575df6421f19db21dfce upstream.
A valid implementation choice for the ChooseRandomNonExcludedTag()
pseudocode function used by IRG is to behave in the same way as with
GCR_EL1.RRND=0. This would mean that RGSR_EL1.SEED is used as an LFSR
which must have a non-zero value in order for IRG to properly produce
pseudorandom numbers. However, RGSR_EL1 is reset to an UNKNOWN value
on soft reset and thus may reset to 0. Therefore we must initialize
RGSR_EL1.SEED to a non-zero value in order to ensure that IRG behaves
as expected.
Signed-off-by: Peter Collingbourne <[email protected]>
Fixes: 3b714d24ef17 ("arm64: mte: CPU feature detection and initial sysreg configuration")
Cc: <[email protected]> # 5.10
Link: https://linux-review.googlesource.com/id/I2b089b6c7d6f17ee37e2f0db7df5ad5bcc04526c
Acked-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/proc.S | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -444,6 +444,18 @@ SYM_FUNC_START(__cpu_setup)
mov x10, #(SYS_GCR_EL1_RRND | SYS_GCR_EL1_EXCL_MASK)
msr_s SYS_GCR_EL1, x10
+ /*
+ * If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then
+ * RGSR_EL1.SEED must be non-zero for IRG to produce
+ * pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we
+ * must initialize it.
+ */
+ mrs x10, CNTVCT_EL0
+ ands x10, x10, #SYS_RGSR_EL1_SEED_MASK
+ csinc x10, x10, xzr, ne
+ lsl x10, x10, #SYS_RGSR_EL1_SEED_SHIFT
+ msr_s SYS_RGSR_EL1, x10
+
/* clear any pending tag check faults in TFSR*_EL1 */
msr_s SYS_TFSR_EL1, xzr
msr_s SYS_TFSRE0_EL1, xzr
From: Peter Collingbourne <[email protected]>
commit f649dc0e0d7b509c75570ee403723660f5b72ec7 upstream.
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9
Signed-off-by: Peter Collingbourne <[email protected]>
Tested-by: Alexander Potapenko <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Peter Collingbourne <[email protected]>
Cc: George Popescu <[email protected]>
Cc: Elena Petrova <[email protected]>
Cc: Evgenii Stepanov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_kasan.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -449,8 +449,20 @@ static char global_array[10];
static void kasan_global_oob(struct kunit *test)
{
- volatile int i = 3;
- char *p = &global_array[ARRAY_SIZE(global_array) + i];
+ /*
+ * Deliberate out-of-bounds access. To prevent CONFIG_UBSAN_LOCAL_BOUNDS
+ * from failing here and panicing the kernel, access the array via a
+ * volatile pointer, which will prevent the compiler from being able to
+ * determine the array bounds.
+ *
+ * This access uses a volatile pointer to char (char *volatile) rather
+ * than the more conventional pointer to volatile char (volatile char *)
+ * because we want to prevent the compiler from making inferences about
+ * the pointer itself (i.e. its array bounds), not the data that it
+ * refers to.
+ */
+ char *volatile array = global_array;
+ char *p = &array[ARRAY_SIZE(global_array) + 3];
/* Only generic mode instruments globals. */
if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) {
@@ -479,8 +491,9 @@ static void ksize_unpoisons_memory(struc
static void kasan_stack_oob(struct kunit *test)
{
char stack_array[10];
- volatile int i = OOB_TAG_OFF;
- char *p = &stack_array[ARRAY_SIZE(stack_array) + i];
+ /* See comment in kasan_global_oob. */
+ char *volatile array = stack_array;
+ char *p = &array[ARRAY_SIZE(stack_array) + OOB_TAG_OFF];
if (!IS_ENABLED(CONFIG_KASAN_STACK)) {
kunit_info(test, "CONFIG_KASAN_STACK is not enabled");
@@ -494,7 +507,9 @@ static void kasan_alloca_oob_left(struct
{
volatile int i = 10;
char alloca_array[i];
- char *p = alloca_array - 1;
+ /* See comment in kasan_global_oob. */
+ char *volatile array = alloca_array;
+ char *p = array - 1;
/* Only generic mode instruments dynamic allocas. */
if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) {
@@ -514,7 +529,9 @@ static void kasan_alloca_oob_right(struc
{
volatile int i = 10;
char alloca_array[i];
- char *p = alloca_array + i;
+ /* See comment in kasan_global_oob. */
+ char *volatile array = alloca_array;
+ char *p = array + i;
/* Only generic mode instruments dynamic allocas. */
if (!IS_ENABLED(CONFIG_KASAN_GENERIC)) {
From: Catalin Marinas <[email protected]>
commit 588a513d34257fdde95a9f0df0202e31998e85c6 upstream.
To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.
When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.
Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Signed-off-by: Catalin Marinas <[email protected]>
Cc: <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Steven Price <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/flush.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -55,8 +55,10 @@ void __sync_icache_dcache(pte_t pte)
{
struct page *page = pte_page(pte);
- if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+ if (!test_bit(PG_dcache_clean, &page->flags)) {
sync_icache_aliases(page_address(page), page_size(page));
+ set_bit(PG_dcache_clean, &page->flags);
+ }
}
EXPORT_SYMBOL_GPL(__sync_icache_dcache);
From: Filipe Manana <[email protected]>
commit 626e9f41f7c281ba3e02843702f68471706aa6d9 upstream.
When doing a fast fsync on a file, there is a race which can result in the
fsync returning success to user space without logging the inode and without
durably persisting new data.
The following example shows one possible scenario for this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/bar
$ xfs_io -f -c "pwrite -S 0xab 0 1M" -c "fsync" /mnt/baz
# Now we have:
# file bar == inode 257
# file baz == inode 258
$ mv /mnt/baz /mnt/foo
# Now we have:
# file bar == inode 257
# file foo == inode 258
$ xfs_io -c "pwrite -S 0xcd 0 1M" /mnt/foo
# fsync bar before foo, it is important to trigger the race.
$ xfs_io -c "fsync" /mnt/bar
$ xfs_io -c "fsync" /mnt/foo
# After this:
# inode 257, file bar, is empty
# inode 258, file foo, has 1M filled with 0xcd
<power failure>
# Replay the log:
$ mount /dev/sdc /mnt
# After this point file foo should have 1M filled with 0xcd and not 0xab
The following steps explain how the race happens:
1) Before the first fsync of inode 258, when it has the "baz" name, its
->logged_trans is 0, ->last_sub_trans is 0 and ->last_log_commit is -1.
The inode also has the full sync flag set;
2) After the first fsync, we set inode 258 ->logged_trans to 6, which is
the generation of the current transaction, and set ->last_log_commit
to 0, which is the current value of ->last_sub_trans (done at
btrfs_log_inode()).
The full sync flag is cleared from the inode during the fsync.
The log sub transaction that was committed had an ID of 0 and when we
synced the log, at btrfs_sync_log(), we incremented root->log_transid
from 0 to 1;
3) During the rename:
We update inode 258, through btrfs_update_inode(), and that causes its
->last_sub_trans to be set to 1 (the current log transaction ID), and
->last_log_commit remains with a value of 0.
After updating inode 258, because we have previously logged the inode
in the previous fsync, we log again the inode through the call to
btrfs_log_new_name(). This results in updating the inode's
->last_log_commit from 0 to 1 (the current value of its
->last_sub_trans).
The ->last_sub_trans of inode 257 is updated to 1, which is the ID of
the next log transaction;
4) Then a buffered write against inode 258 is made. This leaves the value
of ->last_sub_trans as 1 (the ID of the current log transaction, stored
at root->log_transid);
5) Then an fsync against inode 257 (or any other inode other than 258),
happens. This results in committing the log transaction with ID 1,
which results in updating root->last_log_commit to 1 and bumping
root->log_transid from 1 to 2;
6) Then an fsync against inode 258 starts. We flush delalloc and wait only
for writeback to complete, since the full sync flag is not set in the
inode's runtime flags - we do not wait for ordered extents to complete.
Then, at btrfs_sync_file(), we call btrfs_inode_in_log() before the
ordered extent completes. The call returns true:
static inline bool btrfs_inode_in_log(...)
{
bool ret = false;
spin_lock(&inode->lock);
if (inode->logged_trans == generation &&
inode->last_sub_trans <= inode->last_log_commit &&
inode->last_sub_trans <= inode->root->last_log_commit)
ret = true;
spin_unlock(&inode->lock);
return ret;
}
generation has a value of 6 (fs_info->generation), ->logged_trans also
has a value of 6 (set when we logged the inode during the first fsync
and when logging it during the rename), ->last_sub_trans has a value
of 1, set during the rename (step 3), ->last_log_commit also has a
value of 1 (set in step 3) and root->last_log_commit has a value of 1,
which was set in step 5 when fsyncing inode 257.
As a consequence we don't log the inode, any new extents and do not
sync the log, resulting in a data loss if a power failure happens
after the fsync and before the current transaction commits.
Also, because we do not log the inode, after a power failure the mtime
and ctime of the inode do not match those we had before.
When the ordered extent completes before we call btrfs_inode_in_log(),
then the call returns false and we log the inode and sync the log,
since at the end of ordered extent completion we update the inode and
set ->last_sub_trans to 2 (the value of root->log_transid) and
->last_log_commit to 1.
This problem is found after removing the check for the emptiness of the
inode's list of modified extents in the recent commit 209ecbb8585bf6
("btrfs: remove stale comment and logic from btrfs_inode_in_log()"),
added in the 5.13 merge window. However checking the emptiness of the
list is not really the way to solve this problem, and was never intended
to, because while that solves the problem for COW writes, the problem
persists for NOCOW writes because in that case the list is always empty.
In the case of NOCOW writes, even though we wait for the writeback to
complete before returning from btrfs_sync_file(), we end up not logging
the inode, which has a new mtime/ctime, and because we don't sync the log,
we never issue disk barriers (send REQ_PREFLUSH to the device) since that
only happens when we sync the log (when we write super blocks at
btrfs_sync_log()). So effectively, for a NOCOW case, when we return from
btrfs_sync_file() to user space, we are not guaranteeing that the data is
durably persisted on disk.
Also, while the example above uses a rename exchange to show how the
problem happens, it is not the only way to trigger it. An alternative
could be adding a new hard link to inode 258, since that also results
in calling btrfs_log_new_name() and updating the inode in the log.
An example reproducer using the addition of a hard link instead of a
rename operation:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/bar
$ xfs_io -f -c "pwrite -S 0xab 0 1M" -c "fsync" /mnt/foo
$ ln /mnt/foo /mnt/foo_link
$ xfs_io -c "pwrite -S 0xcd 0 1M" /mnt/foo
$ xfs_io -c "fsync" /mnt/bar
$ xfs_io -c "fsync" /mnt/foo
<power failure>
# Replay the log:
$ mount /dev/sdc /mnt
# After this point file foo often has 1M filled with 0xab and not 0xcd
The reasons leading to the final fsync of file foo, inode 258, not
persisting the new data are the same as for the previous example with
a rename operation.
So fix by never skipping logging and log syncing when there are still any
ordered extents in flight. To avoid making the conditional if statement
that checks if logging an inode is needed harder to read, place all the
logic into an helper function with separate if statements to make it more
manageable and easier to read.
A test case for fstests will follow soon.
For NOCOW writes, the problem existed before commit b5e6c3e170b770
("btrfs: always wait on ordered extents at fsync time"), introduced in
kernel 4.19, then it went away with that commit since we started to always
wait for ordered extent completion before logging.
The problem came back again once the fast fsync path was changed again to
avoid waiting for ordered extent completion, in commit 487781796d3022
("btrfs: make fast fsyncs wait only for writeback"), added in kernel 5.10.
However, for COW writes, the race only happens after the recent
commit 209ecbb8585bf6 ("btrfs: remove stale comment and logic from
btrfs_inode_in_log()"), introduced in the 5.13 merge window. For NOCOW
writes, the bug existed before that commit. So tag 5.10+ as the release
for stable backports.
CC: [email protected] # 5.10+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/file.c | 36 +++++++++++++++++++++++++-----------
fs/btrfs/tree-log.c | 3 ++-
2 files changed, 27 insertions(+), 12 deletions(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2065,6 +2065,30 @@ static int start_ordered_ops(struct inod
return ret;
}
+static inline bool skip_inode_logging(const struct btrfs_log_ctx *ctx)
+{
+ struct btrfs_inode *inode = BTRFS_I(ctx->inode);
+ struct btrfs_fs_info *fs_info = inode->root->fs_info;
+
+ if (btrfs_inode_in_log(inode, fs_info->generation) &&
+ list_empty(&ctx->ordered_extents))
+ return true;
+
+ /*
+ * If we are doing a fast fsync we can not bail out if the inode's
+ * last_trans is <= then the last committed transaction, because we only
+ * update the last_trans of the inode during ordered extent completion,
+ * and for a fast fsync we don't wait for that, we only wait for the
+ * writeback to complete.
+ */
+ if (inode->last_trans <= fs_info->last_trans_committed &&
+ (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags) ||
+ list_empty(&ctx->ordered_extents)))
+ return true;
+
+ return false;
+}
+
/*
* fsync call for both files and directories. This logs the inode into
* the tree log instead of forcing full commits whenever possible.
@@ -2080,7 +2104,6 @@ int btrfs_sync_file(struct file *file, l
{
struct dentry *dentry = file_dentry(file);
struct inode *inode = d_inode(dentry);
- struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
struct btrfs_log_ctx ctx;
@@ -2187,17 +2210,8 @@ int btrfs_sync_file(struct file *file, l
atomic_inc(&root->log_batch);
- /*
- * If we are doing a fast fsync we can not bail out if the inode's
- * last_trans is <= then the last committed transaction, because we only
- * update the last_trans of the inode during ordered extent completion,
- * and for a fast fsync we don't wait for that, we only wait for the
- * writeback to complete.
- */
smp_mb();
- if (btrfs_inode_in_log(BTRFS_I(inode), fs_info->generation) ||
- (BTRFS_I(inode)->last_trans <= fs_info->last_trans_committed &&
- (full_sync || list_empty(&ctx.ordered_extents)))) {
+ if (skip_inode_logging(&ctx)) {
/*
* We've had everything committed since the last time we were
* modified so clear this flag in case it was set for whatever
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -6062,7 +6062,8 @@ static int btrfs_log_inode_parent(struct
* (since logging them is pointless, a link count of 0 means they
* will never be accessible).
*/
- if (btrfs_inode_in_log(inode, trans->transid) ||
+ if ((btrfs_inode_in_log(inode, trans->transid) &&
+ list_empty(&ctx->ordered_extents)) ||
inode->vfs_inode.i_nlink == 0) {
ret = BTRFS_NO_LOG_SYNC;
goto end_no_trans;
From: David Ward <[email protected]>
commit fe1c97d008f86f672f0e9265f180c22451ca3b9f upstream.
It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)
Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:
BUG: key ffff9248900cd148 has not been registered!
Fixes: 9037246bb2da ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586
Reported-by: Mikhail Gavrilov <[email protected]>
Signed-off-by: David Ward <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -643,6 +643,7 @@ struct hdcp_workqueue *hdcp_create_workq
/* File created at /sys/class/drm/card0/device/hdcp_srm*/
hdcp_work[0].attr = data_attr;
+ sysfs_bin_attr_init(&hdcp_work[0].attr);
if (sysfs_create_bin_file(&adev->dev->kobj, &hdcp_work[0].attr))
DRM_WARN("Failed to create device file hdcp_srm");
From: Ville Syrjälä <[email protected]>
commit 4819d16d91145966ce03818a95169df1fd56b299 upstream.
Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size()
can in fact return <4KiB, which leads to div-by-zero here.
Avoid that.
Not sure i915_gem_object_get_tile_row_size() is entirely
sane anyway since it doesn't account for the different tile
layouts on i8xx/i915...
I'm not able to hit this before commit 6846895fde05 ("drm/i915:
Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks
like I also need to run recent version of Mesa. With those in
place xonotic trips on this quite easily on my 85x.
Cc: [email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ed52c62d386f764194e0184fdb905d5f24194cae)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
@@ -189,7 +189,7 @@ compute_partial_view(const struct drm_i9
struct i915_ggtt_view view;
if (i915_gem_object_is_tiled(obj))
- chunk = roundup(chunk, tile_row_pages(obj));
+ chunk = roundup(chunk, tile_row_pages(obj) ?: 1);
view.type = I915_GGTT_VIEW_PARTIAL;
view.partial.offset = rounddown(page_offset, chunk);
From: Kai-Heng Feng <[email protected]>
commit 227545b9a08c68778ddd89428f99c351fc9315ac upstream.
Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).
The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.
So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).
v2:
- Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon.h | 1 +
drivers/gpu/drm/radeon/radeon_pm.c | 8 ++++++++
drivers/gpu/drm/radeon/si_dpm.c | 3 +++
3 files changed, 12 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1559,6 +1559,7 @@ struct radeon_dpm {
void *priv;
u32 new_active_crtcs;
int new_active_crtc_count;
+ int high_pixelclock_count;
u32 current_active_crtcs;
int current_active_crtc_count;
bool single_display;
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1747,6 +1747,7 @@ static void radeon_pm_compute_clocks_dpm
struct drm_device *ddev = rdev->ddev;
struct drm_crtc *crtc;
struct radeon_crtc *radeon_crtc;
+ struct radeon_connector *radeon_connector;
if (!rdev->pm.dpm_enabled)
return;
@@ -1756,6 +1757,7 @@ static void radeon_pm_compute_clocks_dpm
/* update active crtc counts */
rdev->pm.dpm.new_active_crtcs = 0;
rdev->pm.dpm.new_active_crtc_count = 0;
+ rdev->pm.dpm.high_pixelclock_count = 0;
if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
list_for_each_entry(crtc,
&ddev->mode_config.crtc_list, head) {
@@ -1763,6 +1765,12 @@ static void radeon_pm_compute_clocks_dpm
if (crtc->enabled) {
rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
rdev->pm.dpm.new_active_crtc_count++;
+ if (!radeon_crtc->connector)
+ continue;
+
+ radeon_connector = to_radeon_connector(radeon_crtc->connector);
+ if (radeon_connector->pixelclock_for_modeset > 297000)
+ rdev->pm.dpm.high_pixelclock_count++;
}
}
}
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2982,6 +2982,9 @@ static void si_apply_state_adjust_rules(
(rdev->pdev->device == 0x6605)) {
max_sclk = 75000;
}
+
+ if (rdev->pm.dpm.high_pixelclock_count > 1)
+ disable_sclk_switching = true;
}
if (rps->vce_active) {
From: Kuogee Hsieh <[email protected]>
[ Upstream commit f2f46b878777e0d3f885c7ddad48f477b4dea247 ]
Initialize audio_comp when audio starts and wait for audio_comp at
dp_display_disable(). This will take care of both dongle unplugged
and display off (suspend) cases.
Changes in v2:
-- add dp_display_signal_audio_start()
Changes in v3:
-- restore dp_display_handle_plugged_change() at dp_hpd_unplug_handle().
Changes in v4:
-- none
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Tested-by: Stephen Boyd <[email protected]>
Fixes: c703d5789590 ("drm/msm/dp: trigger unplug event in msm_dp_display_disable")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_audio.c | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 11 +++++++++--
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_audio.c b/drivers/gpu/drm/msm/dp/dp_audio.c
index 82a8673ab8da..d7e4a39a904e 100644
--- a/drivers/gpu/drm/msm/dp/dp_audio.c
+++ b/drivers/gpu/drm/msm/dp/dp_audio.c
@@ -527,6 +527,7 @@ int dp_audio_hw_params(struct device *dev,
dp_audio_setup_acr(audio);
dp_audio_safe_to_exit_level(audio);
dp_audio_enable(audio, true);
+ dp_display_signal_audio_start(dp_display);
dp_display->audio_enabled = true;
end:
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a2db14f852f1..66f2ea3d42fc 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -176,6 +176,15 @@ static int dp_del_event(struct dp_display_private *dp_priv, u32 event)
return 0;
}
+void dp_display_signal_audio_start(struct msm_dp *dp_display)
+{
+ struct dp_display_private *dp;
+
+ dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+ reinit_completion(&dp->audio_comp);
+}
+
void dp_display_signal_audio_complete(struct msm_dp *dp_display)
{
struct dp_display_private *dp;
@@ -620,7 +629,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0, DP_TIMEOUT_5_SECOND);
/* signal the disconnect event early to ensure proper teardown */
- reinit_completion(&dp->audio_comp);
dp_display_handle_plugged_change(g_dp_display, false);
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK |
@@ -841,7 +849,6 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
/* wait only if audio was enabled */
if (dp_display->audio_enabled) {
/* signal the disconnect event */
- reinit_completion(&dp->audio_comp);
dp_display_handle_plugged_change(dp_display, false);
if (!wait_for_completion_timeout(&dp->audio_comp,
HZ * 5))
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index 6092ba1ed85e..5173c89eedf7 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -34,6 +34,7 @@ int dp_display_get_modes(struct msm_dp *dp_display,
int dp_display_request_irq(struct msm_dp *dp_display);
bool dp_display_check_video_test(struct msm_dp *dp_display);
int dp_display_get_test_bpp(struct msm_dp *dp_display);
+void dp_display_signal_audio_start(struct msm_dp *dp_display);
void dp_display_signal_audio_complete(struct msm_dp *dp_display);
#endif /* _DP_DISPLAY_H_ */
--
2.30.2
From: Wanpeng Li <[email protected]>
[ Upstream commit d981dd15498b188636ec5a7d8ad485e650f63d8d ]
Commit ee66e453db13d (KVM: lapic: Busy wait for timer to expire when
using hv_timer) tries to set ktime->expired_tscdeadline by checking
ktime->hv_timer_in_use since lapic timer oneshot/periodic modes which
are emulated by vmx preemption timer also get advanced, they leverage
the same vmx preemption timer logic with tsc-deadline mode. However,
ktime->hv_timer_in_use is cleared before apic_timer_expired() handling,
let's delay this clearing in preemption-disabled region.
Fixes: ee66e453db13d ("KVM: lapic: Busy wait for timer to expire when using hv_timer")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Wanpeng Li <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4ca81ae9bc8a..5759eb075d2f 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1908,8 +1908,8 @@ void kvm_lapic_expired_hv_timer(struct kvm_vcpu *vcpu)
if (!apic->lapic_timer.hv_timer_in_use)
goto out;
WARN_ON(rcuwait_active(&vcpu->wait));
- cancel_hv_timer(apic);
apic_timer_expired(apic, false);
+ cancel_hv_timer(apic);
if (apic_lvtt_period(apic) && apic->lapic_timer.period) {
advance_periodic_target_expiration(apic);
--
2.30.2
From: Benjamin Segall <[email protected]>
commit 262de4102c7bb8e59f26a967a8ffe8cce85cc537 upstream.
single_task_running() is usually more general than need_resched()
but CFS_BANDWIDTH throttling will use resched_task() when there
is just one task to get the task to block. This was causing
long-need_resched warnings and was likely allowing VMs to
overrun their quota when halt polling.
Signed-off-by: Ben Segall <[email protected]>
Signed-off-by: Venkatesh Srinivas <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Cc: [email protected]
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
virt/kvm/kvm_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2797,7 +2797,8 @@ void kvm_vcpu_block(struct kvm_vcpu *vcp
goto out;
}
poll_end = cur = ktime_get();
- } while (single_task_running() && ktime_before(cur, stop));
+ } while (single_task_running() && !need_resched() &&
+ ktime_before(cur, stop));
}
prepare_to_rcuwait(&vcpu->wait);
From: Thomas Gleixner <[email protected]>
[ Upstream commit 594b27e677b35f9734b1969d175ebc6146741109 ]
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes: 16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/x86.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 25660cac6ad4..4bd99f046b0c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7981,6 +7981,7 @@ void kvm_arch_exit(void)
cpuhp_remove_state_nocalls(CPUHP_AP_X86_KVM_CLK_ONLINE);
#ifdef CONFIG_X86_64
pvclock_gtod_unregister_notifier(&pvclock_gtod_notifier);
+ cancel_work_sync(&pvclock_gtod_work);
#endif
kvm_x86_ops.hardware_enable = NULL;
kvm_mmu_module_exit();
--
2.30.2
From: Thomas Gleixner <[email protected]>
[ Upstream commit 3f804f6d201ca93adf4c3df04d1bfd152c1129d6 ]
syzbot reported a possible deadlock in pvclock_gtod_notify():
CPU 0 CPU 1
write_seqcount_begin(&tk_core.seq);
pvclock_gtod_notify() spin_lock(&pool->lock);
queue_work(..., &pvclock_gtod_work) ktime_get()
spin_lock(&pool->lock); do {
seq = read_seqcount_begin(tk_core.seq)
...
} while (read_seqcount_retry(&tk_core.seq, seq);
While this is unlikely to happen, it's possible.
Delegate queue_work() to irq_work() which postpones it until the
tk_core.seq write held region is left and interrupts are reenabled.
Fixes: 16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Reported-by: [email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/x86.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4bd99f046b0c..39ab3d78bf57 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7848,6 +7848,18 @@ static void pvclock_gtod_update_fn(struct work_struct *work)
static DECLARE_WORK(pvclock_gtod_work, pvclock_gtod_update_fn);
+/*
+ * Indirection to move queue_work() out of the tk_core.seq write held
+ * region to prevent possible deadlocks against time accessors which
+ * are invoked with work related locks held.
+ */
+static void pvclock_irq_work_fn(struct irq_work *w)
+{
+ queue_work(system_long_wq, &pvclock_gtod_work);
+}
+
+static DEFINE_IRQ_WORK(pvclock_irq_work, pvclock_irq_work_fn);
+
/*
* Notification about pvclock gtod data update.
*/
@@ -7859,13 +7871,14 @@ static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,
update_pvclock_gtod(tk);
- /* disable master clock if host does not trust, or does not
- * use, TSC based clocksource.
+ /*
+ * Disable master clock if host does not trust, or does not use,
+ * TSC based clocksource. Delegate queue_work() to irq_work as
+ * this is invoked with tk_core.seq write held.
*/
if (!gtod_is_based_on_tsc(gtod->clock.vclock_mode) &&
atomic_read(&kvm_guest_has_master_clock) != 0)
- queue_work(system_long_wq, &pvclock_gtod_work);
-
+ irq_work_queue(&pvclock_irq_work);
return 0;
}
@@ -7981,6 +7994,7 @@ void kvm_arch_exit(void)
cpuhp_remove_state_nocalls(CPUHP_AP_X86_KVM_CLK_ONLINE);
#ifdef CONFIG_X86_64
pvclock_gtod_unregister_notifier(&pvclock_gtod_notifier);
+ irq_work_sync(&pvclock_irq_work);
cancel_work_sync(&pvclock_gtod_work);
#endif
kvm_x86_ops.hardware_enable = NULL;
--
2.30.2
From: Vivek Goyal <[email protected]>
[ Upstream commit 237388320deffde7c2d65ed8fc9eef670dc979b3 ]
I am seeing missed wakeups which ultimately lead to a deadlock when I am
using virtiofs with DAX enabled and running "make -j". I had to mount
virtiofs as rootfs and also reduce to dax window size to 256M to reproduce
the problem consistently.
So here is the problem. put_unlocked_entry() wakes up waiters only
if entry is not null as well as !dax_is_conflict(entry). But if I
call multiple instances of invalidate_inode_pages2() in parallel,
then I can run into a situation where there are waiters on
this index but nobody will wake these waiters.
invalidate_inode_pages2()
invalidate_inode_pages2_range()
invalidate_exceptional_entry2()
dax_invalidate_mapping_entry_sync()
__dax_invalidate_entry() {
xas_lock_irq(&xas);
entry = get_unlocked_entry(&xas, 0);
...
...
dax_disassociate_entry(entry, mapping, trunc);
xas_store(&xas, NULL);
...
...
put_unlocked_entry(&xas, entry);
xas_unlock_irq(&xas);
}
Say a fault in in progress and it has locked entry at offset say "0x1c".
Now say three instances of invalidate_inode_pages2() are in progress
(A, B, C) and they all try to invalidate entry at offset "0x1c". Given
dax entry is locked, all tree instances A, B, C will wait in wait queue.
When dax fault finishes, say A is woken up. It will store NULL entry
at index "0x1c" and wake up B. When B comes along it will find "entry=0"
at page offset 0x1c and it will call put_unlocked_entry(&xas, 0). And
this means put_unlocked_entry() will not wake up next waiter, given
the current code. And that means C continues to wait and is not woken
up.
This patch fixes the issue by waking up all waiters when a dax entry
has been invalidated. This seems to fix the deadlock I am facing
and I can make forward progress.
Reported-by: Sergio Lopez <[email protected]>
Fixes: ac401cc78242 ("dax: New fault locking")
Reviewed-by: Jan Kara <[email protected]>
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Vivek Goyal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dax.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/dax.c b/fs/dax.c
index 56eb1c759ca5..df5485b4bddf 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -675,7 +675,7 @@ static int __dax_invalidate_entry(struct address_space *mapping,
mapping->nrexceptional--;
ret = 1;
out:
- put_unlocked_entry(&xas, entry, WAKE_NEXT);
+ put_unlocked_entry(&xas, entry, WAKE_ALL);
xas_unlock_irq(&xas);
return ret;
}
--
2.30.2
From: Vivek Goyal <[email protected]>
[ Upstream commit 698ab77aebffe08b312fbcdddeb0e8bd08b78717 ]
Dan mentioned that he is not very fond of passing around a boolean true/false
to specify if only next waiter should be woken up or all waiters should be
woken up. He instead prefers that we introduce an enum and make it very
explicity at the callsite itself. Easier to read code.
This patch should not introduce any change of behavior.
Reviewed-by: Greg Kurz <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Vivek Goyal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dax.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/fs/dax.c b/fs/dax.c
index b3d27fdc6775..5ecee51c44ee 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -144,6 +144,16 @@ struct wait_exceptional_entry_queue {
struct exceptional_entry_key key;
};
+/**
+ * enum dax_wake_mode: waitqueue wakeup behaviour
+ * @WAKE_ALL: wake all waiters in the waitqueue
+ * @WAKE_NEXT: wake only the first waiter in the waitqueue
+ */
+enum dax_wake_mode {
+ WAKE_ALL,
+ WAKE_NEXT,
+};
+
static wait_queue_head_t *dax_entry_waitqueue(struct xa_state *xas,
void *entry, struct exceptional_entry_key *key)
{
@@ -182,7 +192,8 @@ static int wake_exceptional_entry_func(wait_queue_entry_t *wait,
* The important information it's conveying is whether the entry at
* this index used to be a PMD entry.
*/
-static void dax_wake_entry(struct xa_state *xas, void *entry, bool wake_all)
+static void dax_wake_entry(struct xa_state *xas, void *entry,
+ enum dax_wake_mode mode)
{
struct exceptional_entry_key key;
wait_queue_head_t *wq;
@@ -196,7 +207,7 @@ static void dax_wake_entry(struct xa_state *xas, void *entry, bool wake_all)
* must be in the waitqueue and the following check will see them.
*/
if (waitqueue_active(wq))
- __wake_up(wq, TASK_NORMAL, wake_all ? 0 : 1, &key);
+ __wake_up(wq, TASK_NORMAL, mode == WAKE_ALL ? 0 : 1, &key);
}
/*
@@ -268,7 +279,7 @@ static void put_unlocked_entry(struct xa_state *xas, void *entry)
{
/* If we were the only waiter woken, wake the next one */
if (entry && !dax_is_conflict(entry))
- dax_wake_entry(xas, entry, false);
+ dax_wake_entry(xas, entry, WAKE_NEXT);
}
/*
@@ -286,7 +297,7 @@ static void dax_unlock_entry(struct xa_state *xas, void *entry)
old = xas_store(xas, entry);
xas_unlock_irq(xas);
BUG_ON(!dax_is_locked(old));
- dax_wake_entry(xas, entry, false);
+ dax_wake_entry(xas, entry, WAKE_NEXT);
}
/*
@@ -524,7 +535,7 @@ static void *grab_mapping_entry(struct xa_state *xas,
dax_disassociate_entry(entry, mapping, false);
xas_store(xas, NULL); /* undo the PMD join */
- dax_wake_entry(xas, entry, true);
+ dax_wake_entry(xas, entry, WAKE_ALL);
mapping->nrexceptional--;
entry = NULL;
xas_set(xas, index);
@@ -937,7 +948,7 @@ static int dax_writeback_one(struct xa_state *xas, struct dax_device *dax_dev,
xas_lock_irq(xas);
xas_store(xas, entry);
xas_clear_mark(xas, PAGECACHE_TAG_DIRTY);
- dax_wake_entry(xas, entry, false);
+ dax_wake_entry(xas, entry, WAKE_NEXT);
trace_dax_writeback_one(mapping->host, index, count);
return ret;
--
2.30.2
From: Michael Ellerman <[email protected]>
commit 8ec7791bae1327b1c279c5cd6e929c3b12daaf0a upstream.
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0)
segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1
code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018
code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit")
Cc: [email protected] # v4.17+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/feature-fixups.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/sched/mm.h>
+#include <linux/stop_machine.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
#include <asm/page.h>
@@ -227,11 +228,25 @@ static void do_stf_exit_barrier_fixups(e
: "unknown");
}
+static int __do_stf_barrier_fixups(void *data)
+{
+ enum stf_barrier_type *types = data;
+
+ do_stf_entry_barrier_fixups(*types);
+ do_stf_exit_barrier_fixups(*types);
+
+ return 0;
+}
void do_stf_barrier_fixups(enum stf_barrier_type types)
{
- do_stf_entry_barrier_fixups(types);
- do_stf_exit_barrier_fixups(types);
+ /*
+ * The call to the fallback entry flush, and the fallback/sync-ori exit
+ * flush can not be safely patched in/out while other CPUs are executing
+ * them. So call __do_stf_barrier_fixups() on one CPU while all other CPUs
+ * spin in the stop machine core with interrupts hard disabled.
+ */
+ stop_machine(__do_stf_barrier_fixups, &types, NULL);
}
void do_uaccess_flush_fixups(enum l1d_flush_type types)
From: Dan Williams <[email protected]>
[ Upstream commit 3a250629d7325f27b278dad1aaf44eab00090e76 ]
Cleanup fill_list() to keep all the pgmap manipulations in a single
location of the function. Update the exit unwind path accordingly.
Link: http://lore.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/160272253442.3136502.16683842453317773487.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Reported-by: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/unpopulated-alloc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/xen/unpopulated-alloc.c b/drivers/xen/unpopulated-alloc.c
index 7762c1bb23cb..e64e6befc63b 100644
--- a/drivers/xen/unpopulated-alloc.c
+++ b/drivers/xen/unpopulated-alloc.c
@@ -27,11 +27,6 @@ static int fill_list(unsigned int nr_pages)
if (!res)
return -ENOMEM;
- pgmap = kzalloc(sizeof(*pgmap), GFP_KERNEL);
- if (!pgmap)
- goto err_pgmap;
-
- pgmap->type = MEMORY_DEVICE_GENERIC;
res->name = "Xen scratch";
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
@@ -43,6 +38,11 @@ static int fill_list(unsigned int nr_pages)
goto err_resource;
}
+ pgmap = kzalloc(sizeof(*pgmap), GFP_KERNEL);
+ if (!pgmap)
+ goto err_pgmap;
+
+ pgmap->type = MEMORY_DEVICE_GENERIC;
pgmap->range = (struct range) {
.start = res->start,
.end = res->end,
@@ -92,10 +92,10 @@ static int fill_list(unsigned int nr_pages)
return 0;
err_memremap:
- release_resource(res);
-err_resource:
kfree(pgmap);
err_pgmap:
+ release_resource(res);
+err_resource:
kfree(res);
return ret;
}
--
2.30.2
From: Dinghao Liu <[email protected]>
[ Upstream commit 8edb79af88efc6e49e735f9baf61d9f0748b881f ]
When devm_request_threaded_irq() fails, we should decrease the
runtime PM counter to keep the counter balanced. But when
iio_device_register() fails, we need not to decrease it because
we have already decreased it before.
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Fixes: 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/light/gp2ap002.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index 7ba7aa59437c..040d8429a6e0 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -583,7 +583,7 @@ static int gp2ap002_probe(struct i2c_client *client,
"gp2ap002", indio_dev);
if (ret) {
dev_err(dev, "unable to request IRQ\n");
- goto out_disable_vio;
+ goto out_put_pm;
}
gp2ap002->irq = client->irq;
@@ -613,8 +613,9 @@ static int gp2ap002_probe(struct i2c_client *client,
return 0;
-out_disable_pm:
+out_put_pm:
pm_runtime_put_noidle(dev);
+out_disable_pm:
pm_runtime_disable(dev);
out_disable_vio:
regulator_disable(gp2ap002->vio);
--
2.30.2
From: Jiri Olsa <[email protected]>
[ Upstream commit ad1237c30d975535a669746496cbed136aa5a045 ]
Justin reported broken build with LIBBPF_DYNAMIC=1.
When linking libbpf dynamically we need to use perf's
hashmap object, because it's not exported in libbpf.so
(only in libbpf.a).
Following build is now passing:
$ make LIBBPF_DYNAMIC=1
BUILD: Doing 'make -j8' parallel build
...
$ ldd perf | grep libbpf
libbpf.so.0 => /lib64/libbpf.so.0 (0x00007fa7630db000)
Fixes: eee19501926d ("perf tools: Grab a copy of libbpf's hashmap")
Reported-by: Justin M. Forbes <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/Makefile.config | 1 +
tools/perf/util/Build | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index ce8516e4de34..2abbd75fbf2e 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -530,6 +530,7 @@ ifndef NO_LIBELF
ifdef LIBBPF_DYNAMIC
ifeq ($(feature-libbpf), 1)
EXTLIBS += -lbpf
+ $(call detected,CONFIG_LIBBPF_DYNAMIC)
else
dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
endif
diff --git a/tools/perf/util/Build b/tools/perf/util/Build
index e2563d0154eb..0cf27354aa45 100644
--- a/tools/perf/util/Build
+++ b/tools/perf/util/Build
@@ -140,7 +140,14 @@ perf-$(CONFIG_LIBELF) += symbol-elf.o
perf-$(CONFIG_LIBELF) += probe-file.o
perf-$(CONFIG_LIBELF) += probe-event.o
+ifdef CONFIG_LIBBPF_DYNAMIC
+ hashmap := 1
+endif
ifndef CONFIG_LIBBPF
+ hashmap := 1
+endif
+
+ifdef hashmap
perf-y += hashmap.o
endif
--
2.30.2
From: Alexandru Ardelean <[email protected]>
[ Upstream commit 7061803522ee7876df1ca18cdd1e1551f761352d ]
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.
The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.
Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.
All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <[email protected]>
Cc: Srinivas Pandruvada <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/Kconfig | 1 -
drivers/iio/common/hid-sensors/Kconfig | 1 +
drivers/iio/gyro/Kconfig | 1 -
drivers/iio/humidity/Kconfig | 1 -
drivers/iio/light/Kconfig | 2 --
drivers/iio/magnetometer/Kconfig | 1 -
drivers/iio/orientation/Kconfig | 2 --
drivers/iio/pressure/Kconfig | 1 -
drivers/iio/temperature/Kconfig | 1 -
9 files changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 2e0c62c39155..8acf277b8b25 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -211,7 +211,6 @@ config DMARD10
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 24d492567336..2a3dd3b907be 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
tristate "Common module (trigger) for all HID Sensor IIO drivers"
depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
select IIO_TRIGGER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build trigger support for HID sensors.
Triggers will be send if all requested attributes were read.
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 5824f2edf975..20b5ac7ab66a 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -111,7 +111,6 @@ config FXAS21002C_SPI
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Gyroscope 3D"
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 6549fcf6db69..2de5494e7c22 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 33ad4dd0b5c7..917f9becf9c7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -256,7 +256,6 @@ config ISL29125
config HID_SENSOR_ALS
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID ALS"
@@ -270,7 +269,6 @@ config HID_SENSOR_ALS
config HID_SENSOR_PROX
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PROX"
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 1697a8c03506..7e9489a35571 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -95,7 +95,6 @@ config MAG3110
config HID_SENSOR_MAGNETOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Magenetometer 3D"
diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig
index a505583cc2fd..396cbbb867f4 100644
--- a/drivers/iio/orientation/Kconfig
+++ b/drivers/iio/orientation/Kconfig
@@ -9,7 +9,6 @@ menu "Inclinometer sensors"
config HID_SENSOR_INCLINOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Inclinometer 3D"
@@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
config HID_SENSOR_DEVICE_ROTATION
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Device Rotation"
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 689b978db4f9..fc0d3cfca418 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -79,7 +79,6 @@ config DPS310
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID PRESS"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index f1f2a1499c9e..4df60082c1fa 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
tristate "HID Environmental temperature sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit dbc03e81586fc33e4945263fd6e09e22eb4b980f ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: a4574f63edc6 ("mm/memremap_pages: convert to 'struct range'")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/unpopulated-alloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/xen/unpopulated-alloc.c b/drivers/xen/unpopulated-alloc.c
index e64e6befc63b..87e6b7db892f 100644
--- a/drivers/xen/unpopulated-alloc.c
+++ b/drivers/xen/unpopulated-alloc.c
@@ -39,8 +39,10 @@ static int fill_list(unsigned int nr_pages)
}
pgmap = kzalloc(sizeof(*pgmap), GFP_KERNEL);
- if (!pgmap)
+ if (!pgmap) {
+ ret = -ENOMEM;
goto err_pgmap;
+ }
pgmap->type = MEMORY_DEVICE_GENERIC;
pgmap->range = (struct range) {
--
2.30.2
From: Vivek Goyal <[email protected]>
[ Upstream commit 4c3d043d271d4d629aa2328796cdfc96b37d3b3c ]
As of now put_unlocked_entry() always wakes up next waiter. In next
patches we want to wake up all waiters at one callsite. Hence, add a
parameter to the function.
This patch does not introduce any change of behavior.
Reviewed-by: Greg Kurz <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Vivek Goyal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dax.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/fs/dax.c b/fs/dax.c
index 5ecee51c44ee..56eb1c759ca5 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -275,11 +275,11 @@ static void wait_entry_unlocked(struct xa_state *xas, void *entry)
finish_wait(wq, &ewait.wait);
}
-static void put_unlocked_entry(struct xa_state *xas, void *entry)
+static void put_unlocked_entry(struct xa_state *xas, void *entry,
+ enum dax_wake_mode mode)
{
- /* If we were the only waiter woken, wake the next one */
if (entry && !dax_is_conflict(entry))
- dax_wake_entry(xas, entry, WAKE_NEXT);
+ dax_wake_entry(xas, entry, mode);
}
/*
@@ -633,7 +633,7 @@ struct page *dax_layout_busy_page_range(struct address_space *mapping,
entry = get_unlocked_entry(&xas, 0);
if (entry)
page = dax_busy_page(entry);
- put_unlocked_entry(&xas, entry);
+ put_unlocked_entry(&xas, entry, WAKE_NEXT);
if (page)
break;
if (++scanned % XA_CHECK_SCHED)
@@ -675,7 +675,7 @@ static int __dax_invalidate_entry(struct address_space *mapping,
mapping->nrexceptional--;
ret = 1;
out:
- put_unlocked_entry(&xas, entry);
+ put_unlocked_entry(&xas, entry, WAKE_NEXT);
xas_unlock_irq(&xas);
return ret;
}
@@ -954,7 +954,7 @@ static int dax_writeback_one(struct xa_state *xas, struct dax_device *dax_dev,
return ret;
put_unlocked:
- put_unlocked_entry(xas, entry);
+ put_unlocked_entry(xas, entry, WAKE_NEXT);
return ret;
}
@@ -1695,7 +1695,7 @@ dax_insert_pfn_mkwrite(struct vm_fault *vmf, pfn_t pfn, unsigned int order)
/* Did we race with someone splitting entry or so? */
if (!entry || dax_is_conflict(entry) ||
(order == 0 && !dax_is_pte_entry(entry))) {
- put_unlocked_entry(&xas, entry);
+ put_unlocked_entry(&xas, entry, WAKE_NEXT);
xas_unlock_irq(&xas);
trace_dax_insert_pfn_mkwrite_no_entry(mapping->host, vmf,
VM_FAULT_NOPAGE);
--
2.30.2
From: Michael Ellerman <[email protected]>
commit aec86b052df6541cc97c5fca44e5934cbea4963b upstream.
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: [email protected] # v5.10+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/feature-fixups.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -299,8 +299,9 @@ void do_uaccess_flush_fixups(enum l1d_fl
: "unknown");
}
-void do_entry_flush_fixups(enum l1d_flush_type types)
+static int __do_entry_flush_fixups(void *data)
{
+ enum l1d_flush_type types = *(enum l1d_flush_type *)data;
unsigned int instrs[3], *dest;
long *start, *end;
int i;
@@ -369,6 +370,19 @@ void do_entry_flush_fixups(enum l1d_flus
: "ori type" :
(types & L1D_FLUSH_MTTRIG) ? "mttrig type"
: "unknown");
+
+ return 0;
+}
+
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+ /*
+ * The call to the fallback flush can not be safely patched in/out while
+ * other CPUs are executing it. So call __do_entry_flush_fixups() on one
+ * CPU while all other CPUs spin in the stop machine core with interrupts
+ * hard disabled.
+ */
+ stop_machine(__do_entry_flush_fixups, &types, NULL);
}
void do_rfi_flush_fixups(enum l1d_flush_type types)
From: Jack Pham <[email protected]>
[ Upstream commit bb9c74a5bd1462499fe5ccb1e3c5ac40dcfa9139 ]
As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure
dynamically") the dwc3_gadget_release() was added which will free
the dwc->gadget structure upon the device's removal when
usb_del_gadget_udc() is called in dwc3_gadget_exit().
However, simply freeing the gadget results a dangling pointer
situation: the endpoints created in dwc3_gadget_init_endpoints()
have their dep->endpoint.ep_list members chained off the list_head
anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed,
the first dwc3_ep in the list now has a dangling prev pointer and
likewise for the next pointer of the dwc3_ep at the tail of the list.
The dwc3_gadget_free_endpoints() that follows will result in a
use-after-free when it calls list_del().
This was caught by enabling KASAN and performing a driver unbind.
The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown
callback for dwc3") also exposes this as a panic during shutdown.
There are a few possibilities to fix this. One could be to perform
a list_del() of the gadget->ep_list itself which removes it from
the rest of the dwc3_ep chain.
Another approach is what this patch does, by splitting up the
usb_del_gadget_udc() call into its separate "del" and "put"
components. This allows dwc3_gadget_free_endpoints() to be
called before the gadget is finally freed with usb_put_gadget().
Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 84d1487e9f06..dab9b5fd15a9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3948,8 +3948,9 @@ int dwc3_gadget_init(struct dwc3 *dwc)
void dwc3_gadget_exit(struct dwc3 *dwc)
{
- usb_del_gadget_udc(dwc->gadget);
+ usb_del_gadget(dwc->gadget);
dwc3_gadget_free_endpoints(dwc);
+ usb_put_gadget(dwc->gadget);
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
kfree(dwc->setup_buf);
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit a12cc5b423d4f36dc1a1ea3911e49cf9dff43898 ]
In error path of f2fs_write_compressed_pages(), it needs to call
f2fs_compress_free_page() to release temporary page.
Fixes: 5e6bbde95982 ("f2fs: introduce mempool for {,de}compress intermediate page allocation")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index d3f407ba64c9..b6b7b1552769 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1321,7 +1321,8 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
for (i = 0; i < cc->nr_cpages; i++) {
if (!cc->cpages[i])
continue;
- f2fs_put_page(cc->cpages[i], 1);
+ f2fs_compress_free_page(cc->cpages[i]);
+ cc->cpages[i] = NULL;
}
out_put_cic:
kmem_cache_free(cic_entry_slab, cic);
--
2.30.2
From: Jouni Roivas <[email protected]>
commit c3187cf32216313fb316084efac4dab3a8459b1d upstream.
I believe there are some issues introduced by commit 31651c607151
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 31651c607151f ("hfsplus: avoid deadlock on file truncation")
Signed-off-by: Jouni Roivas <[email protected]>
Reviewed-by: Anton Altaparmakov <[email protected]>
Cc: Anatoly Trosinenko <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hfsplus/extents.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -598,13 +598,15 @@ void hfsplus_file_truncate(struct inode
res = __hfsplus_ext_cache_extent(&fd, inode, alloc_cnt);
if (res)
break;
- hfs_brec_remove(&fd);
- mutex_unlock(&fd.tree->tree_lock);
start = hip->cached_start;
+ if (blk_cnt <= start)
+ hfs_brec_remove(&fd);
+ mutex_unlock(&fd.tree->tree_lock);
hfsplus_free_extents(sb, hip->cached_extents,
alloc_cnt - start, alloc_cnt - blk_cnt);
hfsplus_dump_extent(hip->cached_extents);
+ mutex_lock(&fd.tree->tree_lock);
if (blk_cnt > start) {
hip->extent_state |= HFSPLUS_EXT_DIRTY;
break;
@@ -612,7 +614,6 @@ void hfsplus_file_truncate(struct inode
alloc_cnt = start;
hip->cached_start = hip->cached_blocks = 0;
hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
- mutex_lock(&fd.tree->tree_lock);
}
hfs_find_exit(&fd);
From: Chao Yu <[email protected]>
[ Upstream commit 8bfbfb0ddd706b1ce2e89259ecc45f192c0ec2bf ]
In f2fs_destroy_compress_ctx(), after f2fs_destroy_compress_ctx(),
cc.cluster_idx will be cleared w/ NULL_CLUSTER, f2fs_cluster_blocks()
may check wrong cluster metadata, fix it.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 17 +++++++++--------
fs/f2fs/data.c | 6 +++---
fs/f2fs/f2fs.h | 2 +-
3 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 58eb5eefe268..f94b13075ea4 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -151,13 +151,14 @@ int f2fs_init_compress_ctx(struct compress_ctx *cc)
return cc->rpages ? 0 : -ENOMEM;
}
-void f2fs_destroy_compress_ctx(struct compress_ctx *cc)
+void f2fs_destroy_compress_ctx(struct compress_ctx *cc, bool reuse)
{
page_array_free(cc->inode, cc->rpages, cc->cluster_size);
cc->rpages = NULL;
cc->nr_rpages = 0;
cc->nr_cpages = 0;
- cc->cluster_idx = NULL_CLUSTER;
+ if (!reuse)
+ cc->cluster_idx = NULL_CLUSTER;
}
void f2fs_compress_ctx_add_page(struct compress_ctx *cc, struct page *page)
@@ -984,7 +985,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
ret = f2fs_read_multi_pages(cc, &bio, cc->cluster_size,
&last_block_in_bio, false, true);
f2fs_put_rpages(cc);
- f2fs_destroy_compress_ctx(cc);
+ f2fs_destroy_compress_ctx(cc, true);
if (ret)
goto out;
if (bio)
@@ -1011,7 +1012,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
release_and_retry:
f2fs_put_rpages(cc);
f2fs_unlock_rpages(cc, i + 1);
- f2fs_destroy_compress_ctx(cc);
+ f2fs_destroy_compress_ctx(cc, true);
goto retry;
}
}
@@ -1044,7 +1045,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
unlock_pages:
f2fs_put_rpages(cc);
f2fs_unlock_rpages(cc, i);
- f2fs_destroy_compress_ctx(cc);
+ f2fs_destroy_compress_ctx(cc, true);
out:
return ret;
}
@@ -1080,7 +1081,7 @@ bool f2fs_compress_write_end(struct inode *inode, void *fsdata,
set_cluster_dirty(&cc);
f2fs_put_rpages_wbc(&cc, NULL, false, 1);
- f2fs_destroy_compress_ctx(&cc);
+ f2fs_destroy_compress_ctx(&cc, false);
return first_index;
}
@@ -1299,7 +1300,7 @@ static int f2fs_write_compressed_pages(struct compress_ctx *cc,
f2fs_put_rpages(cc);
page_array_free(cc->inode, cc->cpages, cc->nr_cpages);
cc->cpages = NULL;
- f2fs_destroy_compress_ctx(cc);
+ f2fs_destroy_compress_ctx(cc, false);
return 0;
out_destroy_crypt:
@@ -1461,7 +1462,7 @@ int f2fs_write_multi_pages(struct compress_ctx *cc,
err = f2fs_write_raw_pages(cc, submitted, wbc, io_type);
f2fs_put_rpages_wbc(cc, wbc, false, 0);
destroy_out:
- f2fs_destroy_compress_ctx(cc);
+ f2fs_destroy_compress_ctx(cc, false);
return err;
}
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 901bd1d963ee..bdc0f3b2d7ab 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2419,7 +2419,7 @@ static int f2fs_mpage_readpages(struct inode *inode,
max_nr_pages,
&last_block_in_bio,
rac != NULL, false);
- f2fs_destroy_compress_ctx(&cc);
+ f2fs_destroy_compress_ctx(&cc, false);
if (ret)
goto set_error_page;
}
@@ -2464,7 +2464,7 @@ static int f2fs_mpage_readpages(struct inode *inode,
max_nr_pages,
&last_block_in_bio,
rac != NULL, false);
- f2fs_destroy_compress_ctx(&cc);
+ f2fs_destroy_compress_ctx(&cc, false);
}
}
#endif
@@ -3168,7 +3168,7 @@ static int f2fs_write_cache_pages(struct address_space *mapping,
}
}
if (f2fs_compressed_file(inode))
- f2fs_destroy_compress_ctx(&cc);
+ f2fs_destroy_compress_ctx(&cc, false);
#endif
if (retry) {
index = 0;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 036d2a3a2f41..69a390c6064c 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3856,7 +3856,7 @@ void f2fs_free_dic(struct decompress_io_ctx *dic);
void f2fs_decompress_end_io(struct page **rpages,
unsigned int cluster_size, bool err, bool verity);
int f2fs_init_compress_ctx(struct compress_ctx *cc);
-void f2fs_destroy_compress_ctx(struct compress_ctx *cc);
+void f2fs_destroy_compress_ctx(struct compress_ctx *cc, bool reuse);
void f2fs_init_compress_info(struct f2fs_sb_info *sbi);
int f2fs_init_page_array_cache(struct f2fs_sb_info *sbi);
void f2fs_destroy_page_array_cache(struct f2fs_sb_info *sbi);
--
2.30.2
From: Chao Yu <[email protected]>
[ Upstream commit a949dc5f2c5cfe0c910b664650f45371254c0744 ]
pos_fsstress testcase complains a panic as belew:
------------[ cut here ]------------
kernel BUG at fs/f2fs/compress.c:1082!
invalid opcode: 0000 [#1] SMP PTI
CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G OE 5.12.0-rc1-custom #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: writeback wb_workfn (flush-252:16)
RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs]
Call Trace:
f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs]
f2fs_write_cache_pages+0x468/0x8a0 [f2fs]
f2fs_write_data_pages+0x2a4/0x2f0 [f2fs]
do_writepages+0x38/0xc0
__writeback_single_inode+0x44/0x2a0
writeback_sb_inodes+0x223/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x290
wb_workfn+0x309/0x500
process_one_work+0x220/0x3c0
worker_thread+0x53/0x420
kthread+0x12f/0x150
ret_from_fork+0x22/0x30
The root cause is truncate() may race with overwrite as below,
so that one reference count left in page can not guarantee the
page attaching in mapping tree all the time, after truncation,
later find_lock_page() may return NULL pointer.
- prepare_compress_overwrite
- f2fs_pagecache_get_page
- unlock_page
- f2fs_setattr
- truncate_setsize
- truncate_inode_page
- delete_from_page_cache
- find_lock_page
Fix this by avoiding referencing updated page.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 35 ++++++++++++-----------------------
1 file changed, 12 insertions(+), 23 deletions(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index b6b7b1552769..58eb5eefe268 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -123,19 +123,6 @@ static void f2fs_unlock_rpages(struct compress_ctx *cc, int len)
f2fs_drop_rpages(cc, len, true);
}
-static void f2fs_put_rpages_mapping(struct address_space *mapping,
- pgoff_t start, int len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- struct page *page = find_get_page(mapping, start + i);
-
- put_page(page);
- put_page(page);
- }
-}
-
static void f2fs_put_rpages_wbc(struct compress_ctx *cc,
struct writeback_control *wbc, bool redirty, int unlock)
{
@@ -986,7 +973,7 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
}
if (PageUptodate(page))
- unlock_page(page);
+ f2fs_put_page(page, 1);
else
f2fs_compress_ctx_add_page(cc, page);
}
@@ -996,32 +983,34 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
ret = f2fs_read_multi_pages(cc, &bio, cc->cluster_size,
&last_block_in_bio, false, true);
+ f2fs_put_rpages(cc);
f2fs_destroy_compress_ctx(cc);
if (ret)
- goto release_pages;
+ goto out;
if (bio)
f2fs_submit_bio(sbi, bio, DATA);
ret = f2fs_init_compress_ctx(cc);
if (ret)
- goto release_pages;
+ goto out;
}
for (i = 0; i < cc->cluster_size; i++) {
f2fs_bug_on(sbi, cc->rpages[i]);
page = find_lock_page(mapping, start_idx + i);
- f2fs_bug_on(sbi, !page);
+ if (!page) {
+ /* page can be truncated */
+ goto release_and_retry;
+ }
f2fs_wait_on_page_writeback(page, DATA, true, true);
-
f2fs_compress_ctx_add_page(cc, page);
- f2fs_put_page(page, 0);
if (!PageUptodate(page)) {
+release_and_retry:
+ f2fs_put_rpages(cc);
f2fs_unlock_rpages(cc, i + 1);
- f2fs_put_rpages_mapping(mapping, start_idx,
- cc->cluster_size);
f2fs_destroy_compress_ctx(cc);
goto retry;
}
@@ -1053,10 +1042,10 @@ static int prepare_compress_overwrite(struct compress_ctx *cc,
}
unlock_pages:
+ f2fs_put_rpages(cc);
f2fs_unlock_rpages(cc, i);
-release_pages:
- f2fs_put_rpages_mapping(mapping, start_idx, i);
f2fs_destroy_compress_ctx(cc);
+out:
return ret;
}
--
2.30.2
From: Sun Ke <[email protected]>
[ Upstream commit 79ebe9110fa458d58f1fceb078e2068d7ad37390 ]
Open /dev/nbdX first, the config_refs will be 1 and
the pointers in nbd_device are still null. Disconnect
/dev/nbdX, then reference a null recv_workq. The
protection by config_refs in nbd_genl_disconnect is useless.
[ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 656.368943] #PF: supervisor write access in kernel mode
[ 656.369844] #PF: error_code(0x0002) - not-present page
[ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0
[ 656.371693] Oops: 0002 [#1] SMP
[ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1
[ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 656.375904] RIP: 0010:mutex_lock+0x29/0x60
[ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d
[ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246
[ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020
[ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318
[ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40
[ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00
[ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
[ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0
[ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 656.384927] Call Trace:
[ 656.385111] flush_workqueue+0x92/0x6c0
[ 656.385395] nbd_disconnect_and_put+0x81/0xd0
[ 656.385716] nbd_genl_disconnect+0x125/0x2a0
[ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0
[ 656.386422] genl_rcv_msg+0xfc/0x2b0
[ 656.386685] ? nbd_ioctl+0x490/0x490
[ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0
[ 656.387354] netlink_rcv_skb+0x62/0x180
[ 656.387638] genl_rcv+0x34/0x60
[ 656.387874] netlink_unicast+0x26d/0x590
[ 656.388162] netlink_sendmsg+0x398/0x6c0
[ 656.388451] ? netlink_rcv_skb+0x180/0x180
[ 656.388750] ____sys_sendmsg+0x1da/0x320
[ 656.389038] ? ____sys_recvmsg+0x130/0x220
[ 656.389334] ___sys_sendmsg+0x8e/0xf0
[ 656.389605] ? ___sys_recvmsg+0xa2/0xf0
[ 656.389889] ? handle_mm_fault+0x1671/0x21d0
[ 656.390201] __sys_sendmsg+0x6d/0xe0
[ 656.390464] __x64_sys_sendmsg+0x23/0x30
[ 656.390751] do_syscall_64+0x45/0x70
[ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/nbd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 5e45eddbe2ab..9a70eab7edbf 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -2031,7 +2031,8 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd)
* config ref and try to destroy the workqueue from inside the work
* queue.
*/
- flush_workqueue(nbd->recv_workq);
+ if (nbd->recv_workq)
+ flush_workqueue(nbd->recv_workq);
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF,
&nbd->config->runtime_flags))
nbd_config_put(nbd);
--
2.30.2
From: Ming Lei <[email protected]>
[ Upstream commit 03f26d8f11403295de445b6e4e0e57ac57755791 ]
In case of shared sbitmap, request won't be held in plug list any more
sine commit 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per
tagset"), this way makes request merge from flush plug list & batching
submission not possible, so cause performance regression.
Yanhui reports performance regression when running sequential IO
test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk
is emulated with image stored on xfs/megaraid_sas.
Fix the issue by recovering original behavior to allow to hold request
in plug list.
Cc: Yanhui Ma <[email protected]>
Cc: John Garry <[email protected]>
Cc: Bart Van Assche <[email protected]>
Cc: [email protected]
Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 2a1eff60c797..4cd623a7383c 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2203,8 +2203,9 @@ blk_qc_t blk_mq_submit_bio(struct bio *bio)
/* Bypass scheduler for flush requests */
blk_insert_flush(rq);
blk_mq_run_hw_queue(data.hctx, true);
- } else if (plug && (q->nr_hw_queues == 1 || q->mq_ops->commit_rqs ||
- !blk_queue_nonrot(q))) {
+ } else if (plug && (q->nr_hw_queues == 1 ||
+ blk_mq_is_sbitmap_shared(rq->mq_hctx->flags) ||
+ q->mq_ops->commit_rqs || !blk_queue_nonrot(q))) {
/*
* Use plugging if we have a ->commit_rqs() hook as well, as
* we know the driver uses bd->last in a smart fashion.
--
2.30.2
From: Marcel Hamer <[email protected]>
commit e17b02d4970913233d543c79c9c66e72cac05bdd upstream.
When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.
In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.
If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.
Signed-off-by: Marcel Hamer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-omap.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -437,8 +437,13 @@ static int dwc3_omap_extcon_register(str
if (extcon_get_state(edev, EXTCON_USB) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+ else
+ dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
if (extcon_get_state(edev, EXTCON_USB_HOST) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+ else
+ dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
omap->edev = edev;
}
From: Bart Van Assche <[email protected]>
[ Upstream commit 630ef623ed26c18a457cdc070cf24014e50129c2 ]
If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Fixes: 0d2602ca30e4 ("blk-mq: improve support for shared tags maps")
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 4cd623a7383c..4bf9449b4586 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -3256,10 +3256,12 @@ EXPORT_SYMBOL(blk_mq_init_allocated_queue);
/* tags can _not_ be used after returning from blk_mq_exit_queue */
void blk_mq_exit_queue(struct request_queue *q)
{
- struct blk_mq_tag_set *set = q->tag_set;
+ struct blk_mq_tag_set *set = q->tag_set;
- blk_mq_del_queue_tag_set(q);
+ /* Checks hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED. */
blk_mq_exit_hw_queues(q, set, set->nr_hw_queues);
+ /* May clear BLK_MQ_F_TAG_QUEUE_SHARED in hctx->flags. */
+ blk_mq_del_queue_tag_set(q);
}
static int __blk_mq_alloc_rq_maps(struct blk_mq_tag_set *set)
--
2.30.2
From: Maximilian Luz <[email protected]>
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.
On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.
Cc: <[email protected]>
Signed-off-by: Maximilian Luz <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ext-caps.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -7,8 +7,9 @@
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16*1000)
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
/* HC not running - set to 1 when run/stop bit is cleared. */
#define XHCI_STS_HALT (1<<0)
From: Chunfeng Yun <[email protected]>
commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.
This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.
CC: <[email protected]>
Reported-by: Tianping Fang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3592,9 +3592,6 @@ int usb_port_resume(struct usb_device *u
* sequence.
*/
status = hub_port_status(hub, port1, &portstatus, &portchange);
-
- /* TRSMRCY = 10 msec */
- msleep(10);
}
SuspendCleared:
@@ -3609,6 +3606,9 @@ int usb_port_resume(struct usb_device *u
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_SUSPEND);
}
+
+ /* TRSMRCY = 10 msec */
+ msleep(10);
}
if (udev->persist_enabled)
From: Dmitry Osipenko <[email protected]>
commit f73c730774d88a14d7b60feee6d0e13570f99499 upstream.
The raw temperature value is a 16-bit signed integer. The sign casting
is missing in the code, which results in a wrong temperature reported
by userspace tools, fix it.
Cc: [email protected]
Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf
Tested-by: Maxim Schwalm <[email protected]> # Asus TF700T
Tested-by: Svyatoslav Ryhel <[email protected]> # Asus TF201
Reported-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Jean-Baptiste Maneyrol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/gyro/mpu3050-core.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -271,7 +271,16 @@ static int mpu3050_read_raw(struct iio_d
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
- /* The temperature scaling is (x+23000)/280 Celsius */
+ /*
+ * The temperature scaling is (x+23000)/280 Celsius
+ * for the "best fit straight line" temperature range
+ * of -30C..85C. The 23000 includes room temperature
+ * offset of +35C, 280 is the precision scale and x is
+ * the 16-bit signed integer reported by hardware.
+ *
+ * Temperature value itself represents temperature of
+ * the sensor die.
+ */
*val = 23000;
return IIO_VAL_INT;
default:
@@ -328,7 +337,7 @@ static int mpu3050_read_raw(struct iio_d
goto out_read_raw_unlock;
}
- *val = be16_to_cpu(raw_val);
+ *val = (s16)be16_to_cpu(raw_val);
ret = IIO_VAL_INT;
goto out_read_raw_unlock;
From: Christophe JAILLET <[email protected]>
[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ]
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.
So remove simplify the first error message.
While at it, also remove the useless initialization of 'retval'.
Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/fotg210-hcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 1d94fcfac2c2..bd958f059fe6 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5568,7 +5568,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct resource *res;
int irq;
- int retval = -ENODEV;
+ int retval;
struct fotg210_hcd *fotg210;
if (usb_disabled())
@@ -5588,7 +5588,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
hcd = usb_create_hcd(&fotg210_fotg210_hc_driver, dev,
dev_name(dev));
if (!hcd) {
- dev_err(dev, "failed to create hcd with err %d\n", retval);
+ dev_err(dev, "failed to create hcd\n");
retval = -ENOMEM;
goto fail_create_hcd;
}
--
2.30.2
From: Ferry Toth <[email protected]>
commit 04357fafea9c7ed34525eb9680c760245c3bb958 upstream.
On Intel Merrifield LPM is causing host to reset port after a timeout.
By disabling LPM entirely this is prevented.
Fixes: 066c09593454 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield")
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ferry Toth <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-pci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -120,6 +120,7 @@ static const struct property_entry dwc3_
PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
From: Sandeep Singh <[email protected]>
commit 3c128781d8da463761495aaf8898c9ecb4e71528 upstream.
One of AMD xhci controller require reset on resume.
Occasionally AMD xhci controller does not respond to
Stop endpoint command.
Once the issue happens controller goes into bad state
and in that case controller needs to be reset.
Cc: <[email protected]>
Signed-off-by: Sandeep Singh <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -167,8 +167,10 @@ static void xhci_pci_quirks(struct devic
(pdev->device == 0x15e0 || pdev->device == 0x15e1))
xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
- if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5)
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
xhci->quirks |= XHCI_DISABLE_SPARSE;
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ }
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
From: Phil Elwell <[email protected]>
commit 75a41ce46bae6cbe7d3bb2584eb844291d642874 upstream.
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.
A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.
Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Phil Elwell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/gadget.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -112,6 +112,7 @@ struct dwc2_hsotg_req;
* @debugfs: File entry for debugfs file for this endpoint.
* @dir_in: Set to true if this endpoint is of the IN direction, which
* means that it is sending data to the Host.
+ * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
* @index: The index for the endpoint registers.
* @mc: Multi Count - number of transactions per microframe
* @interval: Interval for periodic endpoints, in frames or microframes.
@@ -161,6 +162,7 @@ struct dwc2_hsotg_ep {
unsigned short fifo_index;
unsigned char dir_in;
+ unsigned char map_dir;
unsigned char index;
unsigned char mc;
u16 interval;
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -422,7 +422,7 @@ static void dwc2_hsotg_unmap_dma(struct
{
struct usb_request *req = &hs_req->req;
- usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
+ usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir);
}
/*
@@ -1242,6 +1242,7 @@ static int dwc2_hsotg_map_dma(struct dwc
{
int ret;
+ hs_ep->map_dir = hs_ep->dir_in;
ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
if (ret)
goto dma_error;
From: Andy Shevchenko <[email protected]>
commit b9a0866a5bdf6a4643a52872ada6be6184c6f4f2 upstream.
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: Heikki Krogerus <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/ucsi/ucsi.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -910,6 +910,7 @@ static const struct typec_operations ucs
.pr_set = ucsi_pr_swap
};
+/* Caller must call fwnode_handle_put() after use */
static struct fwnode_handle *ucsi_find_fwnode(struct ucsi_connector *con)
{
struct fwnode_handle *fwnode;
@@ -943,7 +944,7 @@ static int ucsi_register_port(struct ucs
command |= UCSI_CONNECTOR_NUMBER(con->num);
ret = ucsi_send_command(ucsi, command, &con->cap, sizeof(con->cap));
if (ret < 0)
- goto out;
+ goto out_unlock;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP)
cap->data = TYPEC_PORT_DRD;
@@ -1039,6 +1040,8 @@ static int ucsi_register_port(struct ucs
trace_ucsi_register_port(con->num, &con->status);
out:
+ fwnode_handle_put(cap->fwnode);
+out_unlock:
mutex_unlock(&con->lock);
return ret;
}
From: Wesley Cheng <[email protected]>
commit 18ffa988dbae69cc6e9949cddd9606f6fe533894 upstream.
If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped. Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.
Fixes: 8d99087c2db8 ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: [email protected]
Signed-off-by: Wesley Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1676,7 +1676,9 @@ static int __dwc3_gadget_ep_queue(struct
}
}
- return __dwc3_gadget_kick_transfer(dep);
+ __dwc3_gadget_kick_transfer(dep);
+
+ return 0;
}
static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
From: Jack Pham <[email protected]>
commit d1d90dd27254c44d087ad3f8b5b3e4fff0571f45 upstream.
commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event
handler") introduced (nearly 5 years ago!) an interrupt handler for
U3/L1-L2 suspend events. The problem is that these events aren't
currently enabled in the DEVTEN register so the handler is never
even invoked. Fix this simply by enabling the corresponding bit
in dwc3_gadget_enable_irq() using the same revision check as found
in the handler.
Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2206,6 +2206,10 @@ static void dwc3_gadget_enable_irq(struc
if (DWC3_VER_IS_PRIOR(DWC3, 250A))
reg |= DWC3_DEVTEN_ULSTCNGEN;
+ /* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */
+ if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+ reg |= DWC3_DEVTEN_EOPFEN;
+
dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
}
From: Jack Pham <[email protected]>
commit 1f4642b72be79757f050924a9b9673b6a02034bc upstream.
commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.
If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().
With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.
[ 151.545106][ T70] Unexpected kernel BRK exception at EL1
[ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c
[ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328
...
[ 151.545542][ T70] Call trace:
[ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c
[ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0
[ 151.545550][ T70] dev_uevent+0x200/0x384
[ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8
[ 151.545557][ T70] power_supply_changed_work+0x174/0x31c
[ 151.545562][ T70] process_one_work+0x244/0x6f0
[ 151.545564][ T70] worker_thread+0x3e0/0xa64
We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command.
Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
Fixes: 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode")
Cc: [email protected]
Reported-and-tested-by: Subbaraman Narayanamurthy <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/ucsi/ucsi.c | 41 ++++++++++++++++++++++++++++++++---------
drivers/usb/typec/ucsi/ucsi.h | 6 ++++--
2 files changed, 36 insertions(+), 11 deletions(-)
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -495,7 +495,8 @@ static void ucsi_unregister_altmodes(str
}
}
-static void ucsi_get_pdos(struct ucsi_connector *con, int is_partner)
+static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
+ u32 *pdos, int offset, int num_pdos)
{
struct ucsi *ucsi = con->ucsi;
u64 command;
@@ -503,17 +504,39 @@ static void ucsi_get_pdos(struct ucsi_co
command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num);
command |= UCSI_GET_PDOS_PARTNER_PDO(is_partner);
- command |= UCSI_GET_PDOS_NUM_PDOS(UCSI_MAX_PDOS - 1);
+ command |= UCSI_GET_PDOS_PDO_OFFSET(offset);
+ command |= UCSI_GET_PDOS_NUM_PDOS(num_pdos - 1);
command |= UCSI_GET_PDOS_SRC_PDOS;
- ret = ucsi_send_command(ucsi, command, con->src_pdos,
- sizeof(con->src_pdos));
- if (ret < 0) {
+ ret = ucsi_send_command(ucsi, command, pdos + offset,
+ num_pdos * sizeof(u32));
+ if (ret < 0)
dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
+ if (ret == 0 && offset == 0)
+ dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
+
+ return ret;
+}
+
+static void ucsi_get_src_pdos(struct ucsi_connector *con, int is_partner)
+{
+ int ret;
+
+ /* UCSI max payload means only getting at most 4 PDOs at a time */
+ ret = ucsi_get_pdos(con, 1, con->src_pdos, 0, UCSI_MAX_PDOS);
+ if (ret < 0)
return;
- }
+
con->num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */
- if (ret == 0)
- dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
+ if (con->num_pdos < UCSI_MAX_PDOS)
+ return;
+
+ /* get the remaining PDOs, if any */
+ ret = ucsi_get_pdos(con, 1, con->src_pdos, UCSI_MAX_PDOS,
+ PDO_MAX_OBJECTS - UCSI_MAX_PDOS);
+ if (ret < 0)
+ return;
+
+ con->num_pdos += ret / sizeof(u32);
}
static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
@@ -522,7 +545,7 @@ static void ucsi_pwr_opmode_change(struc
case UCSI_CONSTAT_PWR_OPMODE_PD:
con->rdo = con->status.request_data_obj;
typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
- ucsi_get_pdos(con, 1);
+ ucsi_get_src_pdos(con, 1);
break;
case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
con->rdo = 0;
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -8,6 +8,7 @@
#include <linux/power_supply.h>
#include <linux/types.h>
#include <linux/usb/typec.h>
+#include <linux/usb/pd.h>
/* -------------------------------------------------------------------------- */
@@ -133,7 +134,9 @@ void ucsi_connector_change(struct ucsi *
/* GET_PDOS command bits */
#define UCSI_GET_PDOS_PARTNER_PDO(_r_) ((u64)(_r_) << 23)
+#define UCSI_GET_PDOS_PDO_OFFSET(_r_) ((u64)(_r_) << 24)
#define UCSI_GET_PDOS_NUM_PDOS(_r_) ((u64)(_r_) << 32)
+#define UCSI_MAX_PDOS (4)
#define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34)
/* -------------------------------------------------------------------------- */
@@ -300,7 +303,6 @@ struct ucsi {
#define UCSI_MAX_SVID 5
#define UCSI_MAX_ALTMODES (UCSI_MAX_SVID * 6)
-#define UCSI_MAX_PDOS (4)
#define UCSI_TYPEC_VSAFE5V 5000
#define UCSI_TYPEC_1_5_CURRENT 1500
@@ -327,7 +329,7 @@ struct ucsi_connector {
struct power_supply *psy;
struct power_supply_desc psy_desc;
u32 rdo;
- u32 src_pdos[UCSI_MAX_PDOS];
+ u32 src_pdos[PDO_MAX_OBJECTS];
int num_pdos;
};
From: Sean Christopherson <[email protected]>
commit 85d0011264da24be08ae907d7f29983a597ca9b1 upstream.
Do not advertise emulation support for RDPID if RDTSCP is unsupported.
RDPID emulation subtly relies on MSR_TSC_AUX to exist in hardware, as
both vmx_get_msr() and svm_get_msr() will return an error if the MSR is
unsupported, i.e. ctxt->ops->get_msr() will fail and the emulator will
inject a #UD.
Note, RDPID emulation also relies on RDTSCP being enabled in the guest,
but this is a KVM bug and will eventually be fixed.
Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Reviewed-by: Reiji Watanabe <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/cpuid.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -572,7 +572,8 @@ static int __do_cpuid_func_emulated(stru
case 7:
entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
entry->eax = 0;
- entry->ecx = F(RDPID);
+ if (kvm_cpu_cap_has(X86_FEATURE_RDTSCP))
+ entry->ecx = F(RDPID);
++array->nent;
default:
break;
From: Abhijeet Rao <[email protected]>
commit b813511135e8b84fa741afdfbab4937919100bef upstream.
In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake
TCSS xHCI needs to be runtime suspended whenever possible to allow the
TCSS hardware block to enter D3cold and thus save energy.
Cc: [email protected]
Signed-off-by: Abhijeet Rao <[email protected]>
Signed-off-by: Nikunj A. Dadhania <[email protected]>
Signed-off-by: Azhar Shaikh <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -57,6 +57,7 @@
#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af
#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
@@ -243,7 +244,8 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
+ pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI))
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
From: Christophe JAILLET <[email protected]>
commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream.
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')
So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.
Be safe and pass the mem_flags to this function as well.
Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring")
Cc: <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1397,7 +1397,7 @@ static int xhci_configure_endpoint(struc
* we need to issue an evaluate context command and wait on it.
*/
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
- unsigned int ep_index, struct urb *urb)
+ unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
{
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
@@ -1428,7 +1428,7 @@ static int xhci_check_maxpacket(struct x
* changes max packet sizes.
*/
- command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ command = xhci_alloc_command(xhci, true, mem_flags);
if (!command)
return -ENOMEM;
@@ -1524,7 +1524,7 @@ static int xhci_urb_enqueue(struct usb_h
*/
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
- ep_index, urb);
+ ep_index, urb, mem_flags);
if (ret < 0) {
xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
From: Juergen Gross <[email protected]>
commit 970655aa9b42461f8394e4457307005bdeee14d9 upstream.
Commit d3eeb1d77c5d0af ("xen/gntdev: use mmu_interval_notifier_insert")
introduced an error in gntdev_mmap(): in case the call of
mmu_interval_notifier_insert_locked() fails the exit path should not
call mmu_interval_notifier_remove(), as this might result in NULL
dereferences.
One reason for failure is e.g. a signal pending for the running
process.
Fixes: d3eeb1d77c5d0af ("xen/gntdev: use mmu_interval_notifier_insert")
Cc: [email protected]
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Luca Fancellu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/gntdev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -1005,8 +1005,10 @@ static int gntdev_mmap(struct file *flip
err = mmu_interval_notifier_insert_locked(
&map->notifier, vma->vm_mm, vma->vm_start,
vma->vm_end - vma->vm_start, &gntdev_mmu_ops);
- if (err)
+ if (err) {
+ map->vma = NULL;
goto out_unlock_put;
+ }
}
mutex_unlock(&priv->lock);
From: Oliver Neukum <[email protected]>
commit 18abf874367456540846319574864e6ff32752e2 upstream.
We have a cycle of callbacks scheduling works which submit
URBs with those callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.
Signed-off-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-wdm.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -321,12 +321,23 @@ exit:
}
-static void kill_urbs(struct wdm_device *desc)
+static void poison_urbs(struct wdm_device *desc)
{
/* the order here is essential */
- usb_kill_urb(desc->command);
- usb_kill_urb(desc->validity);
- usb_kill_urb(desc->response);
+ usb_poison_urb(desc->command);
+ usb_poison_urb(desc->validity);
+ usb_poison_urb(desc->response);
+}
+
+static void unpoison_urbs(struct wdm_device *desc)
+{
+ /*
+ * the order here is not essential
+ * it is symmetrical just to be nice
+ */
+ usb_unpoison_urb(desc->response);
+ usb_unpoison_urb(desc->validity);
+ usb_unpoison_urb(desc->command);
}
static void free_urbs(struct wdm_device *desc)
@@ -741,11 +752,12 @@ static int wdm_release(struct inode *ino
if (!desc->count) {
if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
- kill_urbs(desc);
+ poison_urbs(desc);
spin_lock_irq(&desc->iuspin);
desc->resp_count = 0;
spin_unlock_irq(&desc->iuspin);
desc->manage_power(desc->intf, 0);
+ unpoison_urbs(desc);
} else {
/* must avoid dev_printk here as desc->intf is invalid */
pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
@@ -1037,9 +1049,9 @@ static void wdm_disconnect(struct usb_in
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
- kill_urbs(desc);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
@@ -1080,9 +1092,10 @@ static int wdm_suspend(struct usb_interf
set_bit(WDM_SUSPENDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
/* callback submits work - order is essential */
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
+ unpoison_urbs(desc);
}
if (!PMSG_IS_AUTO(message)) {
mutex_unlock(&desc->wlock);
@@ -1140,7 +1153,7 @@ static int wdm_pre_reset(struct usb_inte
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
return 0;
@@ -1151,6 +1164,7 @@ static int wdm_post_reset(struct usb_int
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ unpoison_urbs(desc);
clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
From: Eddie James <[email protected]>
[ Upstream commit 5216dff22dc2bbbbe6f00335f9fd2879670e753b ]
The poll rate limiter time was initialized at zero. This breaks the
comparison in time_after if jiffies is large. Switch to storing the
next update time rather than the previous time, and initialize the
time when the device is probed.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/occ/common.c | 5 +++--
drivers/hwmon/occ/common.h | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index a71777990d49..d052502dc2c0 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -209,9 +209,9 @@ int occ_update_response(struct occ *occ)
return rc;
/* limit the maximum rate of polling the OCC */
- if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) {
+ if (time_after(jiffies, occ->next_update)) {
rc = occ_poll(occ);
- occ->last_update = jiffies;
+ occ->next_update = jiffies + OCC_UPDATE_FREQUENCY;
} else {
rc = occ->last_error;
}
@@ -1089,6 +1089,7 @@ int occ_setup(struct occ *occ, const char *name)
return rc;
}
+ occ->next_update = jiffies + OCC_UPDATE_FREQUENCY;
occ_parse_poll_response(occ);
rc = occ_setup_sensor_attrs(occ);
diff --git a/drivers/hwmon/occ/common.h b/drivers/hwmon/occ/common.h
index 67e6968b8978..e6df719770e8 100644
--- a/drivers/hwmon/occ/common.h
+++ b/drivers/hwmon/occ/common.h
@@ -99,7 +99,7 @@ struct occ {
u8 poll_cmd_data; /* to perform OCC poll command */
int (*send_cmd)(struct occ *occ, u8 *cmd);
- unsigned long last_update;
+ unsigned long next_update;
struct mutex lock; /* lock OCC access */
struct device *hwmon;
--
2.30.2
From: Vitaly Kuznetsov <[email protected]>
commit f5c7e8425f18fdb9bdb7d13340651d7876890329 upstream.
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().
Fixes: f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/nested.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3139,15 +3139,8 @@ static bool nested_get_evmcs_page(struct
nested_vmx_handle_enlightened_vmptrld(vcpu, false);
if (evmptrld_status == EVMPTRLD_VMFAIL ||
- evmptrld_status == EVMPTRLD_ERROR) {
- pr_debug_ratelimited("%s: enlightened vmptrld failed\n",
- __func__);
- vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
- vcpu->run->internal.suberror =
- KVM_INTERNAL_ERROR_EMULATION;
- vcpu->run->internal.ndata = 0;
+ evmptrld_status == EVMPTRLD_ERROR)
return false;
- }
}
return true;
@@ -3235,8 +3228,16 @@ static bool nested_get_vmcs12_pages(stru
static bool vmx_get_nested_state_pages(struct kvm_vcpu *vcpu)
{
- if (!nested_get_evmcs_page(vcpu))
+ if (!nested_get_evmcs_page(vcpu)) {
+ pr_debug_ratelimited("%s: enlightened vmptrld failed\n",
+ __func__);
+ vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ vcpu->run->internal.suberror =
+ KVM_INTERNAL_ERROR_EMULATION;
+ vcpu->run->internal.ndata = 0;
+
return false;
+ }
if (is_guest_mode(vcpu) && !nested_get_vmcs12_pages(vcpu))
return false;
@@ -4441,7 +4442,15 @@ void nested_vmx_vmexit(struct kvm_vcpu *
/* trying to cancel vmlaunch/vmresume is a bug */
WARN_ON_ONCE(vmx->nested.nested_run_pending);
- kvm_clear_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu);
+ if (kvm_check_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu)) {
+ /*
+ * KVM_REQ_GET_NESTED_STATE_PAGES is also used to map
+ * Enlightened VMCS after migration and we still need to
+ * do that when something is forcing L2->L1 exit prior to
+ * the first L2 run.
+ */
+ (void)nested_get_evmcs_page(vcpu);
+ }
/* Service the TLB flush request for L2 before switching to L1. */
if (kvm_check_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu))
From: Sean Christopherson <[email protected]>
commit 2183de4161b90bd3851ccd3910c87b2c9adfc6ed upstream.
Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.
Fixes: fb6d4d340e05 ("KVM: x86: emulate RDPID")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/emulate.c | 2 +-
arch/x86/kvm/kvm_emulate.h | 1 +
arch/x86/kvm/vmx/vmx.c | 3 ++-
3 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4502,7 +4502,7 @@ static const struct opcode group8[] = {
* from the register case of group9.
*/
static const struct gprefix pfx_0f_c7_7 = {
- N, N, N, II(DstMem | ModRM | Op3264 | EmulateOnUD, em_rdpid, rdtscp),
+ N, N, N, II(DstMem | ModRM | Op3264 | EmulateOnUD, em_rdpid, rdpid),
};
--- a/arch/x86/kvm/kvm_emulate.h
+++ b/arch/x86/kvm/kvm_emulate.h
@@ -468,6 +468,7 @@ enum x86_intercept {
x86_intercept_clgi,
x86_intercept_skinit,
x86_intercept_rdtscp,
+ x86_intercept_rdpid,
x86_intercept_icebp,
x86_intercept_wbinvd,
x86_intercept_monitor,
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7360,8 +7360,9 @@ static int vmx_check_intercept(struct kv
/*
* RDPID causes #UD if disabled through secondary execution controls.
* Because it is marked as EmulateOnUD, we need to intercept it here.
+ * Note, RDPID is hidden behind ENABLE_RDTSCP.
*/
- case x86_intercept_rdtscp:
+ case x86_intercept_rdpid:
if (!nested_cpu_has2(vmcs12, SECONDARY_EXEC_ENABLE_RDTSCP)) {
exception->vector = UD_VECTOR;
exception->error_code_valid = false;
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit 193fcf371f9e3705c14a0bf1d4bfc44af0f7c124 ]
In this preparation patch, we add helpers to convert lbas to sectors &
sectors to lba. This is needed to eliminate code duplication in the ZBD
backend.
Use these helpers in the block device backend.
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/io-cmd-bdev.c | 8 +++-----
drivers/nvme/target/nvmet.h | 10 ++++++++++
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index 125dde3f410e..23095bdfce06 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -256,8 +256,7 @@ static void nvmet_bdev_execute_rw(struct nvmet_req *req)
if (is_pci_p2pdma_page(sg_page(req->sg)))
op |= REQ_NOMERGE;
- sector = le64_to_cpu(req->cmd->rw.slba);
- sector <<= (req->ns->blksize_shift - 9);
+ sector = nvmet_lba_to_sect(req->ns, req->cmd->rw.slba);
if (req->transfer_len <= NVMET_MAX_INLINE_DATA_LEN) {
bio = &req->b.inline_bio;
@@ -345,7 +344,7 @@ static u16 nvmet_bdev_discard_range(struct nvmet_req *req,
int ret;
ret = __blkdev_issue_discard(ns->bdev,
- le64_to_cpu(range->slba) << (ns->blksize_shift - 9),
+ nvmet_lba_to_sect(ns, range->slba),
le32_to_cpu(range->nlb) << (ns->blksize_shift - 9),
GFP_KERNEL, 0, bio);
if (ret && ret != -EOPNOTSUPP) {
@@ -414,8 +413,7 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
if (!nvmet_check_transfer_len(req, 0))
return;
- sector = le64_to_cpu(write_zeroes->slba) <<
- (req->ns->blksize_shift - 9);
+ sector = nvmet_lba_to_sect(req->ns, write_zeroes->slba);
nr_sector = (((sector_t)le16_to_cpu(write_zeroes->length) + 1) <<
(req->ns->blksize_shift - 9));
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 559a15ccc322..c585f4152535 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -601,4 +601,14 @@ static inline bool nvmet_ns_has_pi(struct nvmet_ns *ns)
return ns->pi_type && ns->metadata_size == sizeof(struct t10_pi_tuple);
}
+static inline __le64 nvmet_sect_to_lba(struct nvmet_ns *ns, sector_t sect)
+{
+ return cpu_to_le64(sect >> (ns->blksize_shift - SECTOR_SHIFT));
+}
+
+static inline sector_t nvmet_lba_to_sect(struct nvmet_ns *ns, __le64 lba)
+{
+ return le64_to_cpu(lba) << (ns->blksize_shift - SECTOR_SHIFT);
+}
+
#endif /* _NVMET_H */
--
2.30.2
From: Sean Christopherson <[email protected]>
commit 8aec21c04caa2000f91cf8822ae0811e4b0c3971 upstream.
Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported. Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.
Fixes: 41cd02c6f7f6 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Reviewed-by: Reiji Watanabe <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7302,9 +7302,11 @@ static __init void vmx_set_cpu_caps(void
if (!cpu_has_vmx_xsaves())
kvm_cpu_cap_clear(X86_FEATURE_XSAVES);
- /* CPUID 0x80000001 */
- if (!cpu_has_vmx_rdtscp())
+ /* CPUID 0x80000001 and 0x7 (RDPID) */
+ if (!cpu_has_vmx_rdtscp()) {
kvm_cpu_cap_clear(X86_FEATURE_RDTSCP);
+ kvm_cpu_cap_clear(X86_FEATURE_RDPID);
+ }
if (cpu_has_vmx_waitpkg())
kvm_cpu_cap_check_and_set(X86_FEATURE_WAITPKG);
From: Sean Christopherson <[email protected]>
commit 5104d7ffcf24749939bea7fdb5378d186473f890 upstream.
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit.
Fixes: 4be534102624 ("KVM: VMX: Initialize vmx->guest_msrs[] right after allocation")
Cc: [email protected]
Cc: Xiaoyao Li <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/vmx/vmx.c | 5 +----
arch/x86/kvm/x86.c | 16 ++++++++++++++++
3 files changed, 18 insertions(+), 4 deletions(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1668,6 +1668,7 @@ int kvm_pv_send_ipi(struct kvm *kvm, uns
unsigned long icr, int op_64_bit);
void kvm_define_user_return_msr(unsigned index, u32 msr);
+int kvm_probe_user_return_msr(u32 msr);
int kvm_set_user_return_msr(unsigned index, u64 val, u64 mask);
u64 kvm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc);
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6864,12 +6864,9 @@ static int vmx_create_vcpu(struct kvm_vc
for (i = 0; i < ARRAY_SIZE(vmx_uret_msrs_list); ++i) {
u32 index = vmx_uret_msrs_list[i];
- u32 data_low, data_high;
int j = vmx->nr_uret_msrs;
- if (rdmsr_safe(index, &data_low, &data_high) < 0)
- continue;
- if (wrmsr_safe(index, data_low, data_high) < 0)
+ if (kvm_probe_user_return_msr(index))
continue;
vmx->guest_uret_msrs[j].slot = i;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -322,6 +322,22 @@ static void kvm_on_user_return(struct us
}
}
+int kvm_probe_user_return_msr(u32 msr)
+{
+ u64 val;
+ int ret;
+
+ preempt_disable();
+ ret = rdmsrl_safe(msr, &val);
+ if (ret)
+ goto out;
+ ret = wrmsrl_safe(msr, val);
+out:
+ preempt_enable();
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kvm_probe_user_return_msr);
+
void kvm_define_user_return_msr(unsigned slot, u32 msr)
{
BUG_ON(slot >= KVM_MAX_NR_USER_RETURN_MSRS);
This reverts commit c848416cc05afc1589edba04fe00b85c2f797ee3 which is
eea53c5816889ee8b64544fa2e9311a81184ff9c upstream.
Another iommu patch was backported incorrectly, causing problems, so
drop this as well for the moment.
Reported-by: Wolfgang Müller <[email protected]>
Cc: Ashok Raj <[email protected]>
Cc: Lu Baolu <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel/iommu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -2362,9 +2362,8 @@ static int __domain_mapping(struct dmar_
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
- attr |= DMA_FL_PTE_PRESENT;
if (domain_use_first_level(domain)) {
- attr |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+ attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
if (domain->domain.type == IOMMU_DOMAIN_DMA) {
attr |= DMA_FL_PTE_ACCESS;
From: Michal Kalderon <[email protected]>
[ Upstream commit 8cc365f9559b86802afc0208389f5c8d46b4ad61 ]
When running some traffic and taking down the link on peer, a
retry counter exceeded error is received. This leads to
nvmet_rdma_error_comp which tried accessing the cq_context to
obtain the queue. The cq_context is no longer valid after the
fix to use shared CQ mechanism and should be obtained similar
to how it is obtained in other functions from the wc->qp.
[ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12).
[ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[ 905.839919] PGD 0 P4D 0
[ 905.842464] Oops: 0000 1 SMP NOPTI
[ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1
[ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma]
[ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff
[ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246
[ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000
[ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000
[ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074
[ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010
[ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400
[ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000
[ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12).
[ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0
[ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 905.961857] PKRU: 55555554
[ 906.010315] Call Trace:
[ 906.012778] __ib_process_cq+0x89/0x170 [ib_core]
[ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core]
[ 906.022152] process_one_work+0x1a7/0x360
[ 906.026182] ? create_worker+0x1a0/0x1a0
[ 906.030123] worker_thread+0x30/0x390
[ 906.033802] ? create_worker+0x1a0/0x1a0
[ 906.037744] kthread+0x116/0x130
[ 906.040988] ? kthread_flush_work_fn+0x10/0x10
[ 906.045456] ret_from_fork+0x1f/0x40
Fixes: ca0f1a8055be2 ("nvmet-rdma: use new shared CQ mechanism")
Signed-off-by: Shai Malin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/rdma.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 6c1f3ab7649c..7d607f435e36 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -700,7 +700,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc)
{
struct nvmet_rdma_rsp *rsp =
container_of(wc->wr_cqe, struct nvmet_rdma_rsp, send_cqe);
- struct nvmet_rdma_queue *queue = cq->cq_context;
+ struct nvmet_rdma_queue *queue = wc->qp->qp_context;
nvmet_rdma_release_rsp(rsp);
@@ -786,7 +786,7 @@ static void nvmet_rdma_write_data_done(struct ib_cq *cq, struct ib_wc *wc)
{
struct nvmet_rdma_rsp *rsp =
container_of(wc->wr_cqe, struct nvmet_rdma_rsp, write_cqe);
- struct nvmet_rdma_queue *queue = cq->cq_context;
+ struct nvmet_rdma_queue *queue = wc->qp->qp_context;
struct rdma_cm_id *cm_id = rsp->queue->cm_id;
u16 status;
--
2.30.2
From: Colin Ian King <[email protected]>
commit af0e1871d79cfbb91f732d2c6fa7558e45c31038 upstream.
The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.
Fixes clang scan-build warning:
drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]
Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/light/tsl2583.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -341,6 +341,14 @@ static int tsl2583_als_calibrate(struct
return lux_val;
}
+ /* Avoid division by zero of lux_value later on */
+ if (lux_val == 0) {
+ dev_err(&chip->client->dev,
+ "%s: lux_val of 0 will produce out of range trim_value\n",
+ __func__);
+ return -ENODATA;
+ }
+
gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
* chip->als_settings.als_gain_trim) / lux_val);
if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
From: Lu Baolu <[email protected]>
commit a8ce9ebbecdfda3322bbcece6b3b25888217f8e3 upstream.
The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
Suggested-by: Ashok Raj <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel/iommu.c | 14 ++++++++++++--
include/linux/intel-iommu.h | 2 ++
2 files changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1028,8 +1028,11 @@ static struct dma_pte *pfn_to_dma_pte(st
domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
- if (domain_use_first_level(domain))
+ if (domain_use_first_level(domain)) {
pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+ if (domain->domain.type == IOMMU_DOMAIN_DMA)
+ pteval |= DMA_FL_PTE_ACCESS;
+ }
if (cmpxchg64(&pte->val, 0ULL, pteval))
/* Someone else set it while we were thinking; use theirs. */
free_pgtable_page(tmp_page);
@@ -2359,9 +2362,16 @@ static int __domain_mapping(struct dmar_
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
- if (domain_use_first_level(domain))
+ if (domain_use_first_level(domain)) {
attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
+ if (domain->domain.type == IOMMU_DOMAIN_DMA) {
+ attr |= DMA_FL_PTE_ACCESS;
+ if (prot & DMA_PTE_WRITE)
+ attr |= DMA_FL_PTE_DIRTY;
+ }
+ }
+
if (!sg) {
sg_res = nr_pages;
pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -42,6 +42,8 @@
#define DMA_FL_PTE_PRESENT BIT_ULL(0)
#define DMA_FL_PTE_US BIT_ULL(2)
+#define DMA_FL_PTE_ACCESS BIT_ULL(5)
+#define DMA_FL_PTE_DIRTY BIT_ULL(6)
#define DMA_FL_PTE_XD BIT_ULL(63)
#define ADDR_WIDTH_5LEVEL (57)
From: Ard Biesheuvel <[email protected]>
commit 7a1be318f5795cb66fa0dc86b3ace427fe68057f upstream
On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.
Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.
Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Nicolas Pitre <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/arm/memory.rst | 7 ++++++-
arch/arm/include/asm/fixmap.h | 2 +-
arch/arm/include/asm/memory.h | 5 +++++
arch/arm/kernel/head.S | 5 ++---
arch/arm/kernel/setup.c | 11 ++++++++---
arch/arm/mm/init.c | 1 -
arch/arm/mm/mmu.c | 20 ++++++++++++++------
arch/arm/mm/pv-fixup-asm.S | 4 ++--
8 files changed, 38 insertions(+), 17 deletions(-)
--- a/Documentation/arm/memory.rst
+++ b/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000 fffeffff DTCM mapping area for
fffe0000 fffe7fff ITCM mapping area for platforms with
ITCM mounted inside the CPU.
-ffc00000 ffefffff Fixmap mapping region. Addresses provided
+ffc80000 ffefffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
+ffc00000 ffc7ffff Guard region
+
+ff800000 ffbfffff Permanent, fixed read-only mapping of the
+ firmware provided DT blob
+
fee00000 feffffff Mapping of PCI I/O space. This is a static
mapping within the vmalloc space.
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -2,7 +2,7 @@
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-#define FIXADDR_START 0xffc00000UL
+#define FIXADDR_START 0xffc80000UL
#define FIXADDR_END 0xfff00000UL
#define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE)
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -67,6 +67,10 @@
*/
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
+#define FDT_FIXED_BASE UL(0xff800000)
+#define FDT_FIXED_SIZE (2 * PMD_SIZE)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
#endif /* !CONFIG_MMU */
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -275,9 +275,8 @@ __create_page_tables:
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
- subne r3, r0, r8
- addne r3, r3, #PAGE_OFFSET
- addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+ ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+ addne r3, r3, r4
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
+#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
@@ -89,7 +90,6 @@ unsigned int cacheid __read_mostly;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
-void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -1083,13 +1083,18 @@ void __init hyp_mode_check(void)
void __init setup_arch(char **cmdline_p)
{
const struct machine_desc *mdesc = NULL;
+ void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = phys_to_virt(__atags_pointer);
+ atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
setup_processor();
- if (atags_vaddr)
+ if (atags_vaddr) {
mdesc = setup_machine_fdt(atags_vaddr);
+ if (mdesc)
+ memblock_reserve(__atags_pointer,
+ fdt_totalsize(atags_vaddr));
+ }
if (!mdesc)
mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -223,7 +223,6 @@ void __init arm_memblock_init(const stru
if (mdesc->reserve)
mdesc->reserve();
- early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
/* reserve memory for DMA contiguous allocations */
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -39,6 +39,8 @@
#include "mm.h"
#include "tcm.h"
+extern unsigned long __atags_pointer;
+
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
@@ -946,7 +948,7 @@ static void __init create_mapping(struct
return;
}
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ if (md->type == MT_DEVICE &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1333,6 +1335,15 @@ static void __init devicemaps_init(const
for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
+ if (__atags_pointer) {
+ /* create a read-only mapping of the device tree */
+ map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+ map.virtual = FDT_FIXED_BASE;
+ map.length = FDT_FIXED_SIZE;
+ map.type = MT_ROM;
+ create_mapping(&map);
+ }
+
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
@@ -1489,8 +1500,7 @@ static void __init map_lowmem(void)
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern void *atags_vaddr;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
pgtables_remap lpae_pgtables_remap_asm;
/*
@@ -1503,7 +1513,6 @@ static void __init early_paging_init(con
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
- void *boot_data;
if (!mdesc->pv_fixup)
return;
@@ -1520,7 +1529,6 @@ static void __init early_paging_init(con
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
@@ -1556,7 +1564,7 @@ static void __init early_paging_init(con
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
- lpae_pgtables_remap(offset, pa_pgd, boot_data);
+ lpae_pgtables_remap(offset, pa_pgd);
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
--- a/arch/arm/mm/pv-fixup-asm.S
+++ b/arch/arm/mm/pv-fixup-asm.S
@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
/* Update level 2 entries for the boot data */
add r7, r2, #0x1000
- add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
- bic r7, r7, #(1 << L2_ORDER) - 1
+ movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+ add r7, r7, r3
ldrd r4, r5, [r7]
adds r4, r4, r0
adc r5, r5, r1
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit 608a969046e6e0567d05a166be66c77d2dd8220b ]
When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-
nvmet_bdev_execute_rw()
bio_add_page()
__bio_add_page()
WARN_ON_ONCE(bio_full(bio, len));
This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().
Fixes: 73383adfad24 ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/io-cmd-bdev.c | 2 +-
drivers/nvme/target/nvmet.h | 6 ++++++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index 23095bdfce06..6a9626ff0713 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -258,7 +258,7 @@ static void nvmet_bdev_execute_rw(struct nvmet_req *req)
sector = nvmet_lba_to_sect(req->ns, req->cmd->rw.slba);
- if (req->transfer_len <= NVMET_MAX_INLINE_DATA_LEN) {
+ if (nvmet_use_inline_bvec(req)) {
bio = &req->b.inline_bio;
bio_init(bio, req->inline_bvec, ARRAY_SIZE(req->inline_bvec));
} else {
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index c585f4152535..bc91336080e0 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -611,4 +611,10 @@ static inline sector_t nvmet_lba_to_sect(struct nvmet_ns *ns, __le64 lba)
return le64_to_cpu(lba) << (ns->blksize_shift - SECTOR_SHIFT);
}
+static inline bool nvmet_use_inline_bvec(struct nvmet_req *req)
+{
+ return req->transfer_len <= NVMET_MAX_INLINE_DATA_LEN &&
+ req->sg_cnt <= NVMET_MAX_INLINE_BIOVEC;
+}
+
#endif /* _NVMET_H */
--
2.30.2
From: Ard Biesheuvel <[email protected]>
commit fc2933c133744305236793025b00c2f7d258b687 upstream
Commit
149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")
created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.
Tested-by: Joel Stanley <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/memory.h | 6 +++---
arch/arm/kernel/setup.c | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -68,8 +68,8 @@
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
#define FDT_FIXED_BASE UL(0xff800000)
-#define FDT_FIXED_SIZE (2 * PMD_SIZE)
-#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+#define FDT_FIXED_SIZE (2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase) ((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
@@ -111,7 +111,7 @@ extern unsigned long vectors_base;
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
-#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
+#define FDT_VIRT_BASE(physbase) ((void *)(physbase))
#endif /* !CONFIG_MMU */
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1086,7 +1086,7 @@ void __init setup_arch(char **cmdline_p)
void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
+ atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
setup_processor();
if (atags_vaddr) {
From: Ard Biesheuvel <[email protected]>
commit 10fce53c0ef8f6e79115c3d9e0d7ea1338c3fa37 upstream
The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order
bits of R2, and decides that no ATAGS/DTB were provided if the resulting
value is 0x0.
This means that on systems where DRAM starts at 0x0 (such as Raspberry
Pi), no explicit mapping of the DT will be created if R2 points into the
first 1 MB section of memory. This was not a problem before, because the
decompressed kernel is loaded at the base of DRAM and mapped using
sections as well, and so as long as the DT is referenced via a virtual
address that uses the same translation (the linear map, in this case),
things work fine.
However, commit 7a1be318f579 ("9012/1: move device tree mapping out of
linear region") changes this, and now the DT is referenced via a virtual
address that is disjoint from the linear mapping of DRAM, and so we need
the early code to create the DT mapping unconditionally.
So let's create the early DT mapping for any value of R2 != 0x0.
Reported-by: "kernelci.org bot" <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/head.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -274,10 +274,10 @@ __create_page_tables:
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
*/
mov r0, r2, lsr #SECTION_SHIFT
- movs r0, r0, lsl #SECTION_SHIFT
+ cmp r2, #0
ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
addne r3, r3, r4
- orrne r6, r7, r0
+ orrne r6, r7, r0, lsl #SECTION_SHIFT
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
From: Christophe JAILLET <[email protected]>
[ Upstream commit 0c8bd174f0fc131bc9dfab35cd8784f59045da87 ]
If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.
Fixes: eb50aaf960e3 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/scan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b47f14ac75ae..de0533bd4e08 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -705,6 +705,7 @@ int acpi_device_add(struct acpi_device *device,
result = acpi_device_set_name(device, acpi_device_bus_id);
if (result) {
+ kfree_const(acpi_device_bus_id->bus_id);
kfree(acpi_device_bus_id);
goto err_unlock;
}
--
2.30.2
From: Omar Sandoval <[email protected]>
[ Upstream commit efed9a3337e341bd0989161b97453b52567bc59d ]
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).
This manifested as this UBSAN array index out of bounds error reported
by Jakub:
UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
dump_stack+0xa4/0xe5
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
queued_spin_lock_slowpath+0x476/0x480
do_raw_spin_lock+0x1c2/0x1d0
kyber_bio_merge+0x112/0x180
blk_mq_submit_bio+0x1f5/0x1100
submit_bio_noacct+0x7b0/0x870
submit_bio+0xc2/0x3a0
btrfs_map_bio+0x4f0/0x9d0
btrfs_submit_data_bio+0x24e/0x310
submit_one_bio+0x7f/0xb0
submit_extent_page+0xc4/0x440
__extent_writepage_io+0x2b8/0x5e0
__extent_writepage+0x28d/0x6e0
extent_write_cache_pages+0x4d7/0x7a0
extent_writepages+0xa2/0x110
do_writepages+0x8f/0x180
__writeback_single_inode+0x99/0x7f0
writeback_sb_inodes+0x34e/0x790
__writeback_inodes_wb+0x9e/0x120
wb_writeback+0x4d2/0x660
wb_workfn+0x64d/0xa10
process_one_work+0x53a/0xa80
worker_thread+0x69/0x5b0
kthread+0x20b/0x240
ret_from_fork+0x1f/0x30
Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.
Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging")
Reported-by: Jakub Kicinski <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 3 +--
block/blk-mq-sched.c | 8 +++++---
block/kyber-iosched.c | 5 +++--
block/mq-deadline.c | 3 +--
include/linux/elevator.h | 2 +-
5 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 5720978e4d09..c91dca641eb4 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2210,10 +2210,9 @@ static void bfq_remove_request(struct request_queue *q,
}
-static bool bfq_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool bfq_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
- struct request_queue *q = hctx->queue;
struct bfq_data *bfqd = q->elevator->elevator_data;
struct request *free = NULL;
/*
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index d1eafe2c045c..581be65a53c1 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -348,14 +348,16 @@ bool __blk_mq_sched_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
struct elevator_queue *e = q->elevator;
- struct blk_mq_ctx *ctx = blk_mq_get_ctx(q);
- struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
+ struct blk_mq_ctx *ctx;
+ struct blk_mq_hw_ctx *hctx;
bool ret = false;
enum hctx_type type;
if (e && e->type->ops.bio_merge)
- return e->type->ops.bio_merge(hctx, bio, nr_segs);
+ return e->type->ops.bio_merge(q, bio, nr_segs);
+ ctx = blk_mq_get_ctx(q);
+ hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
type = hctx->type;
if (!(hctx->flags & BLK_MQ_F_SHOULD_MERGE) ||
list_empty_careful(&ctx->rq_lists[type]))
diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c
index dc89199bc8c6..7f9ef773bf44 100644
--- a/block/kyber-iosched.c
+++ b/block/kyber-iosched.c
@@ -562,11 +562,12 @@ static void kyber_limit_depth(unsigned int op, struct blk_mq_alloc_data *data)
}
}
-static bool kyber_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool kyber_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
+ struct blk_mq_ctx *ctx = blk_mq_get_ctx(q);
+ struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
struct kyber_hctx_data *khd = hctx->sched_data;
- struct blk_mq_ctx *ctx = blk_mq_get_ctx(hctx->queue);
struct kyber_ctx_queue *kcq = &khd->kcqs[ctx->index_hw[hctx->type]];
unsigned int sched_domain = kyber_sched_domain(bio->bi_opf);
struct list_head *rq_list = &kcq->rq_list[sched_domain];
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index 800ac902809b..2b9635d0dcba 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -461,10 +461,9 @@ static int dd_request_merge(struct request_queue *q, struct request **rq,
return ELEVATOR_NO_MERGE;
}
-static bool dd_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool dd_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
- struct request_queue *q = hctx->queue;
struct deadline_data *dd = q->elevator->elevator_data;
struct request *free = NULL;
bool ret;
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index bacc40a0bdf3..bc26b4e11f62 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -34,7 +34,7 @@ struct elevator_mq_ops {
void (*depth_updated)(struct blk_mq_hw_ctx *);
bool (*allow_merge)(struct request_queue *, struct request *, struct bio *);
- bool (*bio_merge)(struct blk_mq_hw_ctx *, struct bio *, unsigned int);
+ bool (*bio_merge)(struct request_queue *, struct bio *, unsigned int);
int (*request_merge)(struct request_queue *q, struct request **, struct bio *);
void (*request_merged)(struct request_queue *, struct request *, enum elv_merge);
void (*requests_merged)(struct request_queue *, struct request *, struct request *);
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
commit b4104180a2efb85f55e1ba1407885c9421970338 upstream.
syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error. So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.
Link: https://lore.kernel.org/r/[email protected]
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/kobject_uevent.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -251,12 +251,13 @@ static int kobj_usermode_filter(struct k
static int init_uevent_argv(struct kobj_uevent_env *env, const char *subsystem)
{
+ int buffer_size = sizeof(env->buf) - env->buflen;
int len;
- len = strlcpy(&env->buf[env->buflen], subsystem,
- sizeof(env->buf) - env->buflen);
- if (len >= (sizeof(env->buf) - env->buflen)) {
- WARN(1, KERN_ERR "init_uevent_argv: buffer size too small\n");
+ len = strlcpy(&env->buf[env->buflen], subsystem, buffer_size);
+ if (len >= buffer_size) {
+ pr_warn("init_uevent_argv: buffer size of %d too small, needed %d\n",
+ buffer_size, len);
return -ENOMEM;
}
From: Dinghao Liu <[email protected]>
[ Upstream commit a2fa9242e89f27696515699fe0f0296bf1ac1815 ]
When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.
Fixes: 4ac4e086fd8c5 ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index c685f10b5ae4..cc206bfa09c7 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -160,6 +160,7 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
if (ret < 0) {
dev_err(&client->dev, "cannot send start measurement command");
+ pm_runtime_put_noidle(&client->dev);
return ret;
}
--
2.30.2
From: Lv Yunlong <[email protected]>
commit ea995218dddba171fecd05496c69617c5ef3c5b8 upstream.
Our code analyzer reported a double free bug.
In gen8_preallocate_top_level_pdp, pde and pde->pt.base are allocated
via alloc_pd(vm) with one reference. If pin_pt_dma() failed, pde->pt.base
is freed by i915_gem_object_put() with a reference dropped. Then free_pd
calls free_px() defined in intel_ppgtt.c, which calls i915_gem_object_put()
to put pde->pt.base again.
As pde->pt.base is protected by refcount, so the second put will not free
pde->pt.base actually. But, maybe it is better to remove the first put?
Fixes: 82adf901138cc ("drm/i915/gt: Shrink i915_page_directory's slab bucket")
Signed-off-by: Lv Yunlong <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ac69496fe65cca0611d5917b7d232730ff605bc7)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/gen8_ppgtt.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
+++ b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
@@ -628,7 +628,6 @@ static int gen8_preallocate_top_level_pd
err = pin_pt_dma(vm, pde->pt.base);
if (err) {
- i915_gem_object_put(pde->pt.base);
free_pd(vm, pde);
return err;
}
From: Ville Syrjälä <[email protected]>
commit 04d019961fd15de92874575536310243a0d4c5c5 upstream.
We've defined C0DRB3/C1DRB3 as 16 bit registers, so access them
as such.
Fixes: 1c8242c3a4b2 ("drm/i915: Use unchecked writes for setting up the fences")
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f765a5b48c667bdada5e49d5e0f23f8c0687b21b)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c
@@ -652,8 +652,8 @@ static void detect_bit_6_swizzle(struct
* banks of memory are paired and unswizzled on the
* uneven portion, so leave that as unknown.
*/
- if (intel_uncore_read(uncore, C0DRB3) ==
- intel_uncore_read(uncore, C1DRB3)) {
+ if (intel_uncore_read16(uncore, C0DRB3) ==
+ intel_uncore_read16(uncore, C1DRB3)) {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
}
From: Badhri Jagan Sridharan <[email protected]>
commit 374157ff88ae1a7f7927331cbc72c1ec11994e8a upstream.
"usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply"
introduced a regression for req_out_volt and req_op_curr calculation.
req_out_volt should consider the newly calculated max voltage instead
of previously accepted max voltage by the port partner. Likewise,
req_op_curr should consider the newly calculated max current instead
of previously accepted max current by the port partner.
Fixes: e3a072022487 ("usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply")
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2501,10 +2501,10 @@ static unsigned int tcpm_pd_select_pps_a
port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src),
pdo_pps_apdo_max_voltage(snk));
port->pps_data.req_max_curr = min_pps_apdo_current(src, snk);
- port->pps_data.req_out_volt = min(port->pps_data.max_volt,
- max(port->pps_data.min_volt,
+ port->pps_data.req_out_volt = min(port->pps_data.req_max_volt,
+ max(port->pps_data.req_min_volt,
port->pps_data.req_out_volt));
- port->pps_data.req_op_curr = min(port->pps_data.max_curr,
+ port->pps_data.req_op_curr = min(port->pps_data.req_max_curr,
port->pps_data.req_op_curr);
}
From: Stéphane Marchesin <[email protected]>
commit 402be8a101190969fc7ff122d07e262df86e132b upstream.
The retire logic uses the 2 lower bits of the pointer to the retire
function to store flags. However, the auto_retire function is not
guaranteed to be aligned to a multiple of 4, which causes crashes as
we jump to the wrong address, for example like this:
2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1
2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021
2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work
2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20
2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74
2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286
2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007
2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600
2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff
2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0
2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605
2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000
2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0
2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554
2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace:
2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf
2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394
2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375
2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156
2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58
2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e
2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40
2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer cros_ec_sensors_ring kfifo_buf industrialio cros_ec_sensorhub
2021-04-24T18:03:53.804337Z WARNING kernel: [ 516.876972] cdc_ether usbnet iwlmvm lzo_rle lzo_compress iwl7000_mac80211 iwlwifi zram cfg80211 r8152 mii btusb btrtl btintel btbcm bluetooth ecdh_generic ecc joydev
2021-04-24T18:03:53.804337Z EMERG kernel: [ 516.879169] gsmi: Log Shutdown Reason 0x03
This change fixes this by aligning the function.
Signed-off-by: Stéphane Marchesin <[email protected]>
Fixes: 229007e02d69 ("drm/i915: Wrap i915_active in a simple kreffed struct")
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ca419f407b43cc89942ebc297c7a63d94abbcae4)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_active.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_active.c
+++ b/drivers/gpu/drm/i915/i915_active.c
@@ -1159,7 +1159,8 @@ static int auto_active(struct i915_activ
return 0;
}
-static void auto_retire(struct i915_active *ref)
+__i915_active_call static void
+auto_retire(struct i915_active *ref)
{
i915_active_put(ref);
}
From: Christophe JAILLET <[email protected]>
[ Upstream commit d9ff1096a840dddea3d5cfa2149ff7da9f499fb2 ]
'ret' is known to be 0 here.
Initialize 'ret' with the expected error code before using it.
Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/mediatek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
index eebeadd26946..6b92d037d8fc 100644
--- a/drivers/usb/musb/mediatek.c
+++ b/drivers/usb/musb/mediatek.c
@@ -518,8 +518,8 @@ static int mtk_musb_probe(struct platform_device *pdev)
glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR(glue->xceiv)) {
- dev_err(dev, "fail to getting usb-phy %d\n", ret);
ret = PTR_ERR(glue->xceiv);
+ dev_err(dev, "fail to getting usb-phy %d\n", ret);
goto err_unregister_usb_phy;
}
--
2.30.2
From: Tvrtko Ursulin <[email protected]>
commit a915fe5e9601c632417ef5261af70788d7d23a8a upstream.
__i915_active_call annotation is required on the retire callback to ensure
correct function alignment.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Fixes: a21ce8ad12d2 ("drm/i915/overlay: Switch to using i915_active tracking")
Cc: Chris Wilson <[email protected]>
Cc: Matthew Auld <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit d8e44e4dd221ee283ea60a6fb87bca08807aa0ab)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_overlay.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -382,7 +382,7 @@ static void intel_overlay_off_tail(struc
i830_overlay_clock_gating(dev_priv, true);
}
-static void
+__i915_active_call static void
intel_overlay_last_flip_retire(struct i915_active *active)
{
struct intel_overlay *overlay =
From: Fabio Estevam <[email protected]>
commit c2357dd9cbafc8ed37156e32c24884cfa8380b2f upstream.
When building with CONFIG_OF not set, the following clang
build warning is seen:
>> drivers/staging/media/rkvdec/rkvdec.c:967:34: warning: unused variable 'of_rkvdec_match' [-Wunused-const-variable]
Fix the warning by removing the unnecessary of_match_ptr().
Reported-by: kernel test robot <[email protected]>
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/rkvdec/rkvdec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -1107,7 +1107,7 @@ static struct platform_driver rkvdec_dri
.remove = rkvdec_remove,
.driver = {
.name = "rkvdec",
- .of_match_table = of_match_ptr(of_rkvdec_match),
+ .of_match_table = of_rkvdec_match,
.pm = &rkvdec_pm_ops,
},
};
From: Zhen Lei <[email protected]>
commit a7277a73984114b38dcb62c8548850800ffe864e upstream.
The compatible strings "mediatek,*" appears two times, remove one of them.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/serial/8250.yaml | 5 -----
1 file changed, 5 deletions(-)
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -94,11 +94,6 @@ properties:
- mediatek,mt7623-btif
- const: mediatek,mtk-btif
- items:
- - enum:
- - mediatek,mt7622-btif
- - mediatek,mt7623-btif
- - const: mediatek,mtk-btif
- - items:
- const: mrvl,mmp-uart
- const: intel,xscale-uart
- items:
From: Qii Wang <[email protected]>
commit 63ce8e3df8f6deca2da52eaf064751ad4018b46e upstream.
There are some omissions in the previous patch about replacing
I2C_MAX_FAST_MODE__FREQ with I2C_MAX_FAST_MODE_PLUS_FREQ and
need to fix it.
Fixes: b44658e755b5("i2c: mediatek: Send i2c master code at more than 1MHz")
Signed-off-by: Qii Wang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-mt65xx.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -564,7 +564,7 @@ static const struct i2c_spec_values *mtk
static int mtk_i2c_max_step_cnt(unsigned int target_speed)
{
- if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
return MAX_HS_STEP_CNT_DIV;
else
return MAX_STEP_CNT_DIV;
@@ -635,7 +635,7 @@ static int mtk_i2c_check_ac_timing(struc
if (sda_min > sda_max)
return -3;
- if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+ if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
if (i2c->dev_comp->ltiming_adjust) {
i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +850,7 @@ static int mtk_i2c_do_transfer(struct mt
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
- if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+ if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
control_reg |= I2C_CONTROL_RS;
if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1067,8 @@ static int mtk_i2c_transfer(struct i2c_a
}
}
- if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+ if (i2c->auto_restart && num >= 2 &&
+ i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
/* ignore the first restart irq after the master code,
* otherwise the first transfer will be discarded.
*/
From: Paweł Chmiel <[email protected]>
commit 34138a59b92c1a30649a18ec442d2e61f3bc34dd upstream.
This clock must be always enabled to allow access to any registers in
fsys1 CMU. Until proper solution based on runtime PM is applied
(similar to what was done for Exynos5433), mark that clock as critical
so it won't be disabled.
It was observed on Samsung Galaxy S6 device (based on Exynos7420), where
UFS module is probed before pmic used to power that device.
In this case defer probe was happening and that clock was disabled by
UFS driver, causing whole boot to hang on next CMU access.
Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names")
Signed-off-by: Paweł Chmiel <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/linux-clk/[email protected]
[s.nawrocki: Added comment in the code]
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/samsung/clk-exynos7.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -537,8 +537,13 @@ static const struct samsung_gate_clock t
GATE(CLK_ACLK_FSYS0_200, "aclk_fsys0_200", "dout_aclk_fsys0_200",
ENABLE_ACLK_TOP13, 28, CLK_SET_RATE_PARENT |
CLK_IS_CRITICAL, 0),
+ /*
+ * This clock is required for the CMU_FSYS1 registers access, keep it
+ * enabled permanently until proper runtime PM support is added.
+ */
GATE(CLK_ACLK_FSYS1_200, "aclk_fsys1_200", "dout_aclk_fsys1_200",
- ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT, 0),
+ ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT |
+ CLK_IS_CRITICAL, 0),
GATE(CLK_SCLK_PHY_FSYS1_26M, "sclk_phy_fsys1_26m",
"dout_sclk_phy_fsys1_26m", ENABLE_SCLK_TOP1_FSYS11,
From: Lu Baolu <[email protected]>
commit eea53c5816889ee8b64544fa2e9311a81184ff9c upstream.
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <[email protected]>
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel/iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -2362,8 +2362,9 @@ static int __domain_mapping(struct dmar_
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
+ attr |= DMA_FL_PTE_PRESENT;
if (domain_use_first_level(domain)) {
- attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
+ attr |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
if (domain->domain.type == IOMMU_DOMAIN_DMA) {
attr |= DMA_FL_PTE_ACCESS;
From: Geert Uytterhoeven <[email protected]>
commit 7935bb56e21b2add81149f4def8e59b4133fe57c upstream.
The "resets" property is not present on R-Car Gen1 SoCs.
Supporting it would require migrating from renesas,cpg-clocks to
renesas,cpg-mssr.
Fixes: 905fc6b1bfb4a631 ("dt-bindings: rcar-vin: Convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Link: https://lore.kernel.org/r/217c8197efaee7d803b22d433abb0ea8e33b84c6.1619700314.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/media/renesas,vin.yaml | 44 +++++++++------
1 file changed, 28 insertions(+), 16 deletions(-)
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -278,23 +278,35 @@ required:
- interrupts
- clocks
- power-domains
- - resets
-if:
- properties:
- compatible:
- contains:
- enum:
- - renesas,vin-r8a7778
- - renesas,vin-r8a7779
- - renesas,rcar-gen2-vin
-then:
- required:
- - port
-else:
- required:
- - renesas,id
- - ports
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,vin-r8a7778
+ - renesas,vin-r8a7779
+ then:
+ required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,vin-r8a7778
+ - renesas,vin-r8a7779
+ - renesas,rcar-gen2-vin
+ then:
+ required:
+ - port
+ else:
+ required:
+ - renesas,id
+ - ports
additionalProperties: false
From: Kees Cook <[email protected]>
commit 312723a0b34d6d110aa4427a982536bb36ab8471 upstream.
Since debugfs_allow is only set at boot time during __init, make it
read-only after being set.
Fixes: a24c6f7bc923 ("debugfs: Add access restriction option")
Cc: Peter Enderborg <[email protected]>
Reviewed-by: Peter Enderborg <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/debugfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -35,7 +35,7 @@
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
static bool debugfs_registered;
-static unsigned int debugfs_allow = DEFAULT_DEBUGFS_ALLOW_BITS;
+static unsigned int debugfs_allow __ro_after_init = DEFAULT_DEBUGFS_ALLOW_BITS;
/*
* Don't allow access attributes to be changed whilst the kernel is locked down
From: Maciej W. Rozycki <[email protected]>
commit c49f71f60754acbff37505e1d16ca796bf8a8140 upstream.
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: [email protected] # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 57 ++++++++++++++++++++++++++++++------------
1 file changed, 41 insertions(+), 16 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2004 Maciej W. Rozycki
+ * Copyright (C) 2000, 2004, 2021 Maciej W. Rozycki
* Copyright (C) 2003, 07 Ralf Baechle ([email protected])
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,25 +9,18 @@
#ifndef __ASM_DIV64_H
#define __ASM_DIV64_H
-#include <asm-generic/div64.h>
-
-#if BITS_PER_LONG == 64
+#include <asm/bitsperlong.h>
-#include <linux/types.h>
+#if BITS_PER_LONG == 32
/*
* No traps on overflows for any of these...
*/
-#define __div64_32(n, base) \
-({ \
+#define do_div64_32(res, high, low, base) ({ \
unsigned long __cf, __tmp, __tmp2, __i; \
unsigned long __quot32, __mod32; \
- unsigned long __high, __low; \
- unsigned long long __n; \
\
- __high = *__n >> 32; \
- __low = __n; \
__asm__( \
" .set push \n" \
" .set noat \n" \
@@ -51,18 +44,50 @@
" subu %0, %0, %z6 \n" \
" addiu %2, %2, 1 \n" \
"3: \n" \
- " bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
+ " bnez %4, 0b \n" \
+ " srl %5, %1, 0x1f \n" \
" .set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (__high), "1" (__low)); \
+ : "Jr" (base), "0" (high), "1" (low)); \
\
- (__n) = __quot32; \
+ (res) = __quot32; \
__mod32; \
})
-#endif /* BITS_PER_LONG == 64 */
+#define __div64_32(n, base) ({ \
+ unsigned long __upper, __low, __high, __radix; \
+ unsigned long long __modquot; \
+ unsigned long long __quot; \
+ unsigned long long __div; \
+ unsigned long __mod; \
+ \
+ __div = (*n); \
+ __radix = (base); \
+ \
+ __high = __div >> 32; \
+ __low = __div; \
+ __upper = __high; \
+ \
+ if (__high) { \
+ __asm__("divu $0, %z1, %z2" \
+ : "=x" (__modquot) \
+ : "Jr" (__high), "Jr" (__radix)); \
+ __upper = __modquot >> 32; \
+ __high = __modquot; \
+ } \
+ \
+ __mod = do_div64_32(__low, __upper, __low, __radix); \
+ \
+ __quot = __high; \
+ __quot = __quot << 32 | __low; \
+ (*n) = __quot; \
+ __mod; \
+})
+
+#endif /* BITS_PER_LONG == 32 */
+
+#include <asm-generic/div64.h>
#endif /* __ASM_DIV64_H */
From: Kuninori Morimoto <[email protected]>
commit a4856e15e58b54977f1c0c0299309ad4d1f13365 upstream.
commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF
buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status,
but is using "break" at for loop.
This means it is not checking all status. Let's check all BUSIF status.
Fixes: commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer")
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 2 --
1 file changed, 2 deletions(-)
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -797,7 +797,6 @@ static void __rsnd_ssi_interrupt(struct
SSI_SYS_STATUS(i * 2),
0xf << (id * 4));
stop = true;
- break;
}
}
break;
@@ -815,7 +814,6 @@ static void __rsnd_ssi_interrupt(struct
SSI_SYS_STATUS((i * 2) + 1),
0xf << 4);
stop = true;
- break;
}
}
break;
From: Christoph Hellwig <[email protected]>
commit 53fe2a30bc168db9700e00206d991ff934973cf1 upstream.
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance")
Reported-by: Peng Liu <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2622,7 +2622,8 @@ static void nvme_set_latency_tolerance(s
if (ctrl->ps_max_latency_us != latency) {
ctrl->ps_max_latency_us = latency;
- nvme_configure_apst(ctrl);
+ if (ctrl->state == NVME_CTRL_LIVE)
+ nvme_configure_apst(ctrl);
}
}
From: Matthew Wilcox (Oracle) <[email protected]>
commit 9ddb3c14afba8bc5950ed297f02d4ae05ff35cd1 upstream.
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c25fff7171be ("mm: add dma_addr_t to struct page")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Tested-by: Matteo Croce <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mm_types.h | 4 ++--
include/net/page_pool.h | 12 +++++++++++-
net/core/page_pool.c | 12 +++++++-----
3 files changed, 20 insertions(+), 8 deletions(-)
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -97,10 +97,10 @@ struct page {
};
struct { /* page_pool used by netstack */
/**
- * @dma_addr: might require a 64-bit value even on
+ * @dma_addr: might require a 64-bit value on
* 32-bit architectures.
*/
- dma_addr_t dma_addr;
+ unsigned long dma_addr[2];
};
struct { /* slab, slob and slub */
union {
--- a/include/net/page_pool.h
+++ b/include/net/page_pool.h
@@ -191,7 +191,17 @@ static inline void page_pool_recycle_dir
static inline dma_addr_t page_pool_get_dma_addr(struct page *page)
{
- return page->dma_addr;
+ dma_addr_t ret = page->dma_addr[0];
+ if (sizeof(dma_addr_t) > sizeof(unsigned long))
+ ret |= (dma_addr_t)page->dma_addr[1] << 16 << 16;
+ return ret;
+}
+
+static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
+{
+ page->dma_addr[0] = addr;
+ if (sizeof(dma_addr_t) > sizeof(unsigned long))
+ page->dma_addr[1] = upper_32_bits(addr);
}
static inline bool is_page_pool_compiled_in(void)
--- a/net/core/page_pool.c
+++ b/net/core/page_pool.c
@@ -172,8 +172,10 @@ static void page_pool_dma_sync_for_devic
struct page *page,
unsigned int dma_sync_size)
{
+ dma_addr_t dma_addr = page_pool_get_dma_addr(page);
+
dma_sync_size = min(dma_sync_size, pool->p.max_len);
- dma_sync_single_range_for_device(pool->p.dev, page->dma_addr,
+ dma_sync_single_range_for_device(pool->p.dev, dma_addr,
pool->p.offset, dma_sync_size,
pool->p.dma_dir);
}
@@ -224,7 +226,7 @@ static struct page *__page_pool_alloc_pa
put_page(page);
return NULL;
}
- page->dma_addr = dma;
+ page_pool_set_dma_addr(page, dma);
if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
page_pool_dma_sync_for_device(pool, page, pool->p.max_len);
@@ -292,13 +294,13 @@ void page_pool_release_page(struct page_
*/
goto skip_dma_unmap;
- dma = page->dma_addr;
+ dma = page_pool_get_dma_addr(page);
- /* When page is unmapped, it cannot be returned our pool */
+ /* When page is unmapped, it cannot be returned to our pool */
dma_unmap_page_attrs(pool->p.dev, dma,
PAGE_SIZE << pool->p.order, pool->p.dma_dir,
DMA_ATTR_SKIP_CPU_SYNC);
- page->dma_addr = 0;
+ page_pool_set_dma_addr(page, 0);
skip_dma_unmap:
/* This may be the last page returned, releasing the pool, so
* it is not safe to reference pool afterwards.
From: Maciej W. Rozycki <[email protected]>
commit c1d337d45ec0a802299688e17d568c4e3a585895 upstream.
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -68,9 +68,11 @@
\
__high = __div >> 32; \
__low = __div; \
- __upper = __high; \
\
- if (__high) { \
+ if (__high < __radix) { \
+ __upper = __high; \
+ __high = 0; \
+ } else { \
__asm__("divu $0, %z1, %z2" \
: "=x" (__modquot) \
: "Jr" (__high), "Jr" (__radix)); \
From: Arnd Bergmann <[email protected]>
commit fcdf3c34b7abdcbb49690c94c7fa6ce224dc9749 upstream.
Using no_printk() for jbd_debug() revealed two warnings:
fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:256:30: error: format '%d' expects a matching 'int' argument [-Werror=format=]
256 | jbd_debug(3, "Processing fast commit blk with seq %d");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ext4/fast_commit.c: In function 'ext4_fc_replay_add_range':
fs/ext4/fast_commit.c:1732:30: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
1732 | jbd_debug(1, "Converting from %d to %d %lld",
The first one was added incorrectly, and was also missing a few newlines
in debug output, and the second one happened when the type of an
argument changed.
Reported-by: kernel test robot <[email protected]>
Fixes: d556435156b7 ("jbd2: avoid -Wempty-body warnings")
Fixes: 6db074618969 ("ext4: use BIT() macro for BH_** state bits")
Fixes: 5b849b5f96b4 ("jbd2: fast commit recovery path")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/fast_commit.c | 2 +-
fs/jbd2/recovery.c | 5 ++---
2 files changed, 3 insertions(+), 4 deletions(-)
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1694,7 +1694,7 @@ static int ext4_fc_replay_add_range(stru
}
/* Range is mapped and needs a state change */
- jbd_debug(1, "Converting from %d to %d %lld",
+ jbd_debug(1, "Converting from %ld to %d %lld",
map.m_flags & EXT4_MAP_UNWRITTEN,
ext4_ext_is_unwritten(ex), map.m_pblk);
ret = ext4_ext_replay_update_ex(inode, cur, map.m_len,
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -245,15 +245,14 @@ static int fc_do_one_pass(journal_t *jou
return 0;
while (next_fc_block <= journal->j_fc_last) {
- jbd_debug(3, "Fast commit replay: next block %ld",
+ jbd_debug(3, "Fast commit replay: next block %ld\n",
next_fc_block);
err = jread(&bh, journal, next_fc_block);
if (err) {
- jbd_debug(3, "Fast commit replay: read error");
+ jbd_debug(3, "Fast commit replay: read error\n");
break;
}
- jbd_debug(3, "Processing fast commit blk with seq %d");
err = journal->j_fc_replay_callback(journal, bh, pass,
next_fc_block - journal->j_fc_first,
expected_commit_id);
From: Maciej W. Rozycki <[email protected]>
commit 25ab14cbe9d1b66fda44c71a2db7582a31b6f5cd upstream.
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -58,7 +58,6 @@
#define __div64_32(n, base) ({ \
unsigned long __upper, __low, __high, __radix; \
- unsigned long long __modquot; \
unsigned long long __quot; \
unsigned long long __div; \
unsigned long __mod; \
@@ -73,11 +72,8 @@
__upper = __high; \
__high = 0; \
} else { \
- __asm__("divu $0, %z1, %z2" \
- : "=x" (__modquot) \
- : "Jr" (__high), "Jr" (__radix)); \
- __upper = __modquot >> 32; \
- __high = __modquot; \
+ __upper = __high % __radix; \
+ __high /= __radix; \
} \
\
__mod = do_div64_32(__low, __upper, __low, __radix); \
From: Tony Lindgren <[email protected]>
commit 3efe7a878a11c13b5297057bfc1e5639ce1241ce upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm timers instead.
Let's prepare for adding support for percpu timers by adding a common
dmtimer_clkevt_init_common() and call it from dmtimer_clockevent_init().
This patch makes no intentional functional changes.
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/timer-ti-dm-systimer.c | 68 ++++++++++++++++++-----------
1 file changed, 44 insertions(+), 24 deletions(-)
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -530,17 +530,17 @@ static void omap_clockevent_unidle(struc
writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
}
-static int __init dmtimer_clockevent_init(struct device_node *np)
+static int __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
+ struct device_node *np,
+ unsigned int features,
+ const struct cpumask *cpumask,
+ const char *name,
+ int rating)
{
- struct dmtimer_clockevent *clkevt;
struct clock_event_device *dev;
struct dmtimer_systimer *t;
int error;
- clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
- if (!clkevt)
- return -ENOMEM;
-
t = &clkevt->t;
dev = &clkevt->dev;
@@ -548,25 +548,23 @@ static int __init dmtimer_clockevent_ini
* We mostly use cpuidle_coupled with ARM local timers for runtime,
* so there's probably no use for CLOCK_EVT_FEAT_DYNIRQ here.
*/
- dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- dev->rating = 300;
+ dev->features = features;
+ dev->rating = rating;
dev->set_next_event = dmtimer_set_next_event;
dev->set_state_shutdown = dmtimer_clockevent_shutdown;
dev->set_state_periodic = dmtimer_set_periodic;
dev->set_state_oneshot = dmtimer_clockevent_shutdown;
dev->set_state_oneshot_stopped = dmtimer_clockevent_shutdown;
dev->tick_resume = dmtimer_clockevent_shutdown;
- dev->cpumask = cpu_possible_mask;
+ dev->cpumask = cpumask;
dev->irq = irq_of_parse_and_map(np, 0);
- if (!dev->irq) {
- error = -ENXIO;
- goto err_out_free;
- }
+ if (!dev->irq)
+ return -ENXIO;
error = dmtimer_systimer_setup(np, &clkevt->t);
if (error)
- goto err_out_free;
+ return error;
clkevt->period = 0xffffffff - DIV_ROUND_CLOSEST(t->rate, HZ);
@@ -578,32 +576,54 @@ static int __init dmtimer_clockevent_ini
writel_relaxed(OMAP_TIMER_CTRL_POSTED, t->base + t->ifctrl);
error = request_irq(dev->irq, dmtimer_clockevent_interrupt,
- IRQF_TIMER, "clockevent", clkevt);
+ IRQF_TIMER, name, clkevt);
if (error)
goto err_out_unmap;
writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena);
writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup);
- pr_info("TI gptimer clockevent: %s%lu Hz at %pOF\n",
- of_find_property(np, "ti,timer-alwon", NULL) ?
+ pr_info("TI gptimer %s: %s%lu Hz at %pOF\n",
+ name, of_find_property(np, "ti,timer-alwon", NULL) ?
"always-on " : "", t->rate, np->parent);
- clockevents_config_and_register(dev, t->rate,
- 3, /* Timer internal resynch latency */
+ return 0;
+
+err_out_unmap:
+ iounmap(t->base);
+
+ return error;
+}
+
+static int __init dmtimer_clockevent_init(struct device_node *np)
+{
+ struct dmtimer_clockevent *clkevt;
+ int error;
+
+ clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL);
+ if (!clkevt)
+ return -ENOMEM;
+
+ error = dmtimer_clkevt_init_common(clkevt, np,
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ cpu_possible_mask, "clockevent",
+ 300);
+ if (error)
+ goto err_out_free;
+
+ clockevents_config_and_register(&clkevt->dev, clkevt->t.rate,
+ 3, /* Timer internal resync latency */
0xffffffff);
if (of_machine_is_compatible("ti,am33xx") ||
of_machine_is_compatible("ti,am43")) {
- dev->suspend = omap_clockevent_idle;
- dev->resume = omap_clockevent_unidle;
+ clkevt->dev.suspend = omap_clockevent_idle;
+ clkevt->dev.resume = omap_clockevent_unidle;
}
return 0;
-err_out_unmap:
- iounmap(t->base);
-
err_out_free:
kfree(clkevt);
From: Ard Biesheuvel <[email protected]>
commit e9a2f8b599d0bc22a1b13e69527246ac39c697b4 upstream
Before moving the DT mapping out of the linear region, let's prepare
for this change by removing all the phys-to-virt translations of the
__atags_pointer variable, and perform this translation only once at
setup time.
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/prom.h | 4 ++--
arch/arm/kernel/atags.h | 4 ++--
arch/arm/kernel/atags_parse.c | 6 +++---
arch/arm/kernel/devtree.c | 6 +++---
arch/arm/kernel/setup.c | 14 +++++++++-----
arch/arm/mm/mmu.c | 4 ++--
6 files changed, 21 insertions(+), 17 deletions(-)
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -9,12 +9,12 @@
#ifdef CONFIG_OF
-extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(void *dt_virt);
extern void __init arm_dt_init_cpu_maps(void);
#else /* CONFIG_OF */
-static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(void *dt_virt)
{
return NULL;
}
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -2,11 +2,11 @@
void convert_to_tag_list(struct tag *tags);
#ifdef CONFIG_ATAGS
-const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+const struct machine_desc *setup_machine_tags(void *__atags_vaddr,
unsigned int machine_nr);
#else
static inline const struct machine_desc * __init __noreturn
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr)
{
early_print("no ATAGS support: can't continue\n");
while (true);
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -174,7 +174,7 @@ static void __init squash_mem_tags(struc
}
const struct machine_desc * __init
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
{
struct tag *tags = (struct tag *)&default_tags;
const struct machine_desc *mdesc = NULL, *p;
@@ -195,8 +195,8 @@ setup_machine_tags(phys_addr_t __atags_p
if (!mdesc)
return NULL;
- if (__atags_pointer)
- tags = phys_to_virt(__atags_pointer);
+ if (atags_vaddr)
+ tags = atags_vaddr;
else if (mdesc->atag_offset)
tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -203,12 +203,12 @@ static const void * __init arch_get_next
/**
* setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
+ * @dt_virt: virtual address of dt blob
*
* If a dtb was passed to the kernel in r2, then use it to choose the
* correct machine_desc and to setup the system.
*/
-const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
{
const struct machine_desc *mdesc, *mdesc_best = NULL;
@@ -221,7 +221,7 @@ const struct machine_desc * __init setup
mdesc_best = &__mach_desc_GENERIC_DT;
#endif
- if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
+ if (!dt_virt || !early_init_dt_verify(dt_virt))
return NULL;
mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -89,6 +89,7 @@ unsigned int cacheid __read_mostly;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
+void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -1081,19 +1082,22 @@ void __init hyp_mode_check(void)
void __init setup_arch(char **cmdline_p)
{
- const struct machine_desc *mdesc;
+ const struct machine_desc *mdesc = NULL;
+
+ if (__atags_pointer)
+ atags_vaddr = phys_to_virt(__atags_pointer);
setup_processor();
- mdesc = setup_machine_fdt(__atags_pointer);
+ if (atags_vaddr)
+ mdesc = setup_machine_fdt(atags_vaddr);
if (!mdesc)
- mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+ mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
__atags_pointer);
if (__atags_pointer)
- early_print(" r2[]=%*ph\n", 16,
- phys_to_virt(__atags_pointer));
+ early_print(" r2[]=%*ph\n", 16, atags_vaddr);
dump_machine_table();
}
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1489,7 +1489,7 @@ static void __init map_lowmem(void)
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern unsigned long __atags_pointer;
+extern void *atags_vaddr;
typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
pgtables_remap lpae_pgtables_remap_asm;
@@ -1520,7 +1520,7 @@ static void __init early_paging_init(con
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = __va(__atags_pointer);
+ boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
This reverts commit 416fa531c8160151090206a51b829b9218b804d9 which is
commit a8ce9ebbecdfda3322bbcece6b3b25888217f8e3 upstream as it was
backported incorrectly and is causing problems for some systems.
Reported-by: Wolfgang Müller <[email protected]>
Reported-by: Charles Wright <[email protected]>
Reported-by: Christoph Biedl <[email protected]>
Cc: Ashok Raj <[email protected]>
Cc: Lu Baolu <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel/iommu.c | 17 +++++------------
include/linux/intel-iommu.h | 2 --
2 files changed, 5 insertions(+), 14 deletions(-)
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1028,11 +1028,8 @@ static struct dma_pte *pfn_to_dma_pte(st
domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
- if (domain_use_first_level(domain)) {
+ if (domain_use_first_level(domain))
pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
- if (domain->domain.type == IOMMU_DOMAIN_DMA)
- pteval |= DMA_FL_PTE_ACCESS;
- }
if (cmpxchg64(&pte->val, 0ULL, pteval))
/* Someone else set it while we were thinking; use theirs. */
free_pgtable_page(tmp_page);
@@ -2362,18 +2359,14 @@ static int __domain_mapping(struct dmar_
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
- if (domain_use_first_level(domain)) {
+ if (domain_use_first_level(domain))
attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
- if (domain->domain.type == IOMMU_DOMAIN_DMA) {
- attr |= DMA_FL_PTE_ACCESS;
- if (prot & DMA_PTE_WRITE)
- attr |= DMA_FL_PTE_DIRTY;
- }
+ if (!sg) {
+ sg_res = nr_pages;
+ pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
}
- pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
-
while (nr_pages > 0) {
uint64_t tmp;
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -42,8 +42,6 @@
#define DMA_FL_PTE_PRESENT BIT_ULL(0)
#define DMA_FL_PTE_US BIT_ULL(2)
-#define DMA_FL_PTE_ACCESS BIT_ULL(5)
-#define DMA_FL_PTE_DIRTY BIT_ULL(6)
#define DMA_FL_PTE_XD BIT_ULL(63)
#define ADDR_WIDTH_5LEVEL (57)
From: Tony Lindgren <[email protected]>
commit 25de4ce5ed02994aea8bc111d133308f6fd62566 upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
Let's do this as a single patch so it can be backported to v5.8 and later
kernels easily. Note that this patch depends on earlier timer-ti-dm
systimer posted mode fixes, and a preparatory clockevent patch
"clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue".
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Keerthy <[email protected]>
Cc: Tero Kristo <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/dra7-l4.dtsi | 4 -
arch/arm/boot/dts/dra7.dtsi | 20 +++++++
drivers/clocksource/timer-ti-dm-systimer.c | 76 +++++++++++++++++++++++++++++
include/linux/cpuhotplug.h | 1
4 files changed, 99 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1168,7 +1168,7 @@
};
};
- target-module@34000 { /* 0x48034000, ap 7 46.0 */
+ timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x34000 0x4>,
<0x34010 0x4>;
@@ -1195,7 +1195,7 @@
};
};
- target-module@36000 { /* 0x48036000, ap 9 4e.0 */
+ timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x36000 0x4>,
<0x36010 0x4>;
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
timer {
compatible = "arm,armv7-timer";
+ status = "disabled"; /* See ARM architected timer wrap erratum i940 */
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1090,3 +1091,22 @@
assigned-clock-parents = <&sys_32k_ck>;
};
};
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
+
+&timer4_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -2,6 +2,7 @@
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/cpuhotplug.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -630,6 +631,78 @@ err_out_free:
return error;
}
+/* Dmtimer as percpu timer. See dra7 ARM architected timer wrap erratum i940 */
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int __init dmtimer_percpu_timer_init(struct device_node *np, int cpu)
+{
+ struct dmtimer_clockevent *clkevt;
+ int error;
+
+ if (!cpu_possible(cpu))
+ return -EINVAL;
+
+ if (!of_property_read_bool(np->parent, "ti,no-reset-on-init") ||
+ !of_property_read_bool(np->parent, "ti,no-idle"))
+ pr_warn("Incomplete dtb for percpu dmtimer %pOF\n", np->parent);
+
+ clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+
+ error = dmtimer_clkevt_init_common(clkevt, np, CLOCK_EVT_FEAT_ONESHOT,
+ cpumask_of(cpu), "percpu-dmtimer",
+ 500);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/* See TRM for timer internal resynch latency */
+static int omap_dmtimer_starting_cpu(unsigned int cpu)
+{
+ struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+ struct clock_event_device *dev = &clkevt->dev;
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ clockevents_config_and_register(dev, t->rate, 3, ULONG_MAX);
+ irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+ return 0;
+}
+
+static int __init dmtimer_percpu_timer_startup(void)
+{
+ struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, 0);
+ struct dmtimer_systimer *t = &clkevt->t;
+
+ if (t->sysc) {
+ cpuhp_setup_state(CPUHP_AP_TI_GP_TIMER_STARTING,
+ "clockevents/omap/gptimer:starting",
+ omap_dmtimer_starting_cpu, NULL);
+ }
+
+ return 0;
+}
+subsys_initcall(dmtimer_percpu_timer_startup);
+
+static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
+{
+ struct device_node *arm_timer;
+
+ arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+ if (of_device_is_available(arm_timer)) {
+ pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+ return 0;
+ }
+
+ if (pa == 0x48034000) /* dra7 dmtimer3 */
+ return dmtimer_percpu_timer_init(np, 0);
+ else if (pa == 0x48036000) /* dra7 dmtimer4 */
+ return dmtimer_percpu_timer_init(np, 1);
+
+ return 0;
+}
+
/* Clocksource */
static struct dmtimer_clocksource *
to_dmtimer_clocksource(struct clocksource *cs)
@@ -763,6 +836,9 @@ static int __init dmtimer_systimer_init(
if (clockevent == pa)
return dmtimer_clockevent_init(np);
+ if (of_machine_is_compatible("ti,dra7"))
+ return dmtimer_percpu_quirk_init(np, pa);
+
return 0;
}
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -135,6 +135,7 @@ enum cpuhp_state {
CPUHP_AP_RISCV_TIMER_STARTING,
CPUHP_AP_CLINT_TIMER_STARTING,
CPUHP_AP_CSKY_TIMER_STARTING,
+ CPUHP_AP_TI_GP_TIMER_STARTING,
CPUHP_AP_HYPERV_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
On 5/17/2021 6:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Mon, 17 May 2021 15:58:45 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.38-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
Hi!
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 5/17/21 7:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Mon, 17 May 2021 at 21:11, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
Boot tested on arm32 with aspeed_g5 and aspeed_g4 defconfigs.
Tested-by: Joel Stanley <[email protected]>
Cheers,
Joel
On 2021/5/17 21:58, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.38-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.38-rc1
Commit: 7ba05b4014e8c0aa939b4192e85cee82aff0045a
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8896
passed: 8896
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8896
passed: 8896
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
Hi Greg,
On Mon, May 17, 2021 at 03:58:45PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210430): 63 configs -> no failure
arm (gcc version 11.1.1 20210430): 105 configs -> no new failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Mon, 17 May 2021 at 19:33, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.38-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.38-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 7ba05b4014e8c0aa939b4192e85cee82aff0045a
* git describe: v5.10.37-290-g7ba05b4014e8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.37-290-g7ba05b4014e8
## No Regressions (compared to v5.10.37)
## Fixes (compared to v5.10.37)
* mips, build
- clang-10-allnoconfig
- clang-10-defconfig
- clang-10-tinyconfig
- clang-11-allnoconfig
- clang-11-defconfig
- clang-11-tinyconfig
- clang-12-allnoconfig
- clang-12-defconfig
- clang-12-tinyconfig
## Test result summary
total: 71550, pass: 59638, fail: 1093, skip: 10144, xfail: 675,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Mon, May 17, 2021 at 03:58:45PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.38 release.
> There are 289 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:24 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 455 pass: 455 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Mon 2021-05-17 15:59:26, Greg Kroah-Hartman wrote:
> From: Bence Cs?k?s <[email protected]>
>
> [ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]
>
> This quirk signifies that the adapter cannot do a repeated
> START, it always issues a STOP condition after transfers.
>
> Suggested-by: Wolfram Sang <[email protected]>
> Signed-off-by: Bence Cs?k?s <[email protected]>
> Signed-off-by: Wolfram Sang <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
Why is this pushed to 5.10 and 4.19? The define is not used anywhere
AFAICT.
Best regards,
Pavel
> +++ b/include/linux/i2c.h
> @@ -687,6 +687,8 @@ struct i2c_adapter_quirks {
> +/* adapter cannot do repeated START */
> +#define I2C_AQ_NO_REP_START BIT(7)
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> From: Sean Christopherson <[email protected]>
>
> commit c5e2184d1544f9e56140791eff1a351bea2e63b9 upstream.
>
> Remove the update_pte() shadow paging logic, which was obsoleted by
> commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"), but never
> removed. As pointed out by Yu, KVM never write protects leaf page
First, this is cleanup, not a bugfix.
Second, AFAICT 4731d4c7a077 ("KVM: MMU: out of sync shadow core") is
not in 5.10, so this will break stuff according to the changelog.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 19/05/21 21:56, Pavel Machek wrote:
> Hi!
>
>> From: Sean Christopherson <[email protected]>
>>
>> commit c5e2184d1544f9e56140791eff1a351bea2e63b9 upstream.
>>
>> Remove the update_pte() shadow paging logic, which was obsoleted by
>> commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"), but never
>> removed. As pointed out by Yu, KVM never write protects leaf page
>
> First, this is cleanup, not a bugfix.
It was reported to also fix a bug. Commit 4731d4c7a077 is 2008 vintage,
so it is certainly in 5.10.
Paolo
> Second, AFAICT 4731d4c7a077 ("KVM: MMU: out of sync shadow core") is
> not in 5.10, so this will break stuff according to the changelog.
On Mon 2021-05-17 16:03:06, Greg Kroah-Hartman wrote:
> This reverts commit c848416cc05afc1589edba04fe00b85c2f797ee3 which is
> eea53c5816889ee8b64544fa2e9311a81184ff9c upstream.
Please don't do this.
You are "creative" with marking upstream commits, which breaks
scripting, again. How
> Another iommu patch was backported incorrectly, causing problems, so
> drop this as well for the moment.
>
> Reported-by: Wolfgang M?ller <[email protected]>
> Cc: Ashok Raj <[email protected]>
> Cc: Lu Baolu <[email protected]>
> Cc: Joerg Roedel <[email protected]>
> Cc: Sasha Levin <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Simply put it into the sign-off area, where it belongs. People will
happily update the scripts as it will be the last breakage.
Thanks,
Pavel
--
http://www.livejournal.com/~pavelmachek
On Wed, May 26, 2021 at 11:22:47PM +0200, Pavel Machek wrote:
> On Mon 2021-05-17 16:03:06, Greg Kroah-Hartman wrote:
> > This reverts commit c848416cc05afc1589edba04fe00b85c2f797ee3 which is
> > eea53c5816889ee8b64544fa2e9311a81184ff9c upstream.
>
> Please don't do this.
I've always done it this way, this is not new for reverts in the stable
trees.
thanks,
greg k-h