From: Lad Prabhakar <[email protected]>
Introduce ALTERNATIVE_3() macro.
A vendor wants to replace an old_content, but another vendor has used
ALTERNATIVE_2() to patch its customized content at the same location.
In this case, this vendor can use macro ALTERNATIVE_3() and then replace
ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
While at it update comment above ALTERNATIVE_2() macro and make it generic
so that the comment holds good for any new addition of ALTERNATIVE_X()
macros.
Signed-off-by: Lad Prabhakar <[email protected]>
---
v4->v5
* Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
* Updated comment for ALTERNATIVE_x() as suggested by Heiko
RFC v3 -> v4
* New patch
---
arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
1 file changed, 41 insertions(+), 5 deletions(-)
diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
index 7226e2462584..a5b4691520da 100644
--- a/arch/riscv/include/asm/alternative-macros.h
+++ b/arch/riscv/include/asm/alternative-macros.h
@@ -50,8 +50,17 @@
ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
.endm
+.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
+ new_c_2, vendor_id_2, errata_id_2, enable_2, \
+ new_c_3, vendor_id_3, errata_id_3, enable_3
+ ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
+ \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
+ ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
+.endm
+
#define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
#define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
+#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
#else /* !__ASSEMBLY__ */
@@ -98,6 +107,13 @@
__ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
+#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
+ new_c_2, vendor_id_2, errata_id_2, enable_2, \
+ new_c_3, vendor_id_3, errata_id_3, enable_3) \
+ __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
+ new_c_2, vendor_id_2, errata_id_2, enable_2) \
+ ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
+
#endif /* __ASSEMBLY__ */
#define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
@@ -108,6 +124,13 @@
__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
+#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+ new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
+ new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
+ __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
+ new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
+ new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
+
#else /* CONFIG_RISCV_ALTERNATIVE */
#ifdef __ASSEMBLY__
@@ -152,15 +175,28 @@
_ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
/*
- * A vendor wants to replace an old_content, but another vendor has used
- * ALTERNATIVE() to patch its customized content at the same location. In
- * this case, this vendor can create a new macro ALTERNATIVE_2() based
- * on the following sample code and then replace ALTERNATIVE() with
- * ALTERNATIVE_2() to append its customized content.
+ * ALTERNATIVE_x macros allow providing multiple replacement options
+ * for an ALTERNATIVE code section. This is helpful if multiple
+ * implementation variants for the same functionality exist for
+ * different cpu cores.
+ *
+ * Usage:
+ * ALTERNATIVE_x(old_content,
+ * new_content1, vendor_id1, errata_id1, CONFIG_k1,
+ * new_content2, vendor_id2, errata_id2, CONFIG_k2,
+ * ...
+ * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
*/
#define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
_ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
+#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+ new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
+ new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
+ _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
+ new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
+ new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
+
#endif
--
2.25.1
Am Montag, 12. Dezember 2022, 12:55:00 CET schrieb Prabhakar:
> From: Lad Prabhakar <[email protected]>
>
> Introduce ALTERNATIVE_3() macro.
>
> A vendor wants to replace an old_content, but another vendor has used
> ALTERNATIVE_2() to patch its customized content at the same location.
> In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
>
> While at it update comment above ALTERNATIVE_2() macro and make it generic
> so that the comment holds good for any new addition of ALTERNATIVE_X()
> macros.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
> ---
> v4->v5
> * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> * Updated comment for ALTERNATIVE_x() as suggested by Heiko
>
> RFC v3 -> v4
> * New patch
> ---
> arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
> 1 file changed, 41 insertions(+), 5 deletions(-)
>
> diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
> index 7226e2462584..a5b4691520da 100644
> --- a/arch/riscv/include/asm/alternative-macros.h
> +++ b/arch/riscv/include/asm/alternative-macros.h
> @@ -50,8 +50,17 @@
> ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> .endm
>
> +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3
> + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> +.endm
> +
> #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
>
> #else /* !__ASSEMBLY__ */
>
> @@ -98,6 +107,13 @@
> __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
>
> +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> +
> #endif /* __ASSEMBLY__ */
>
> #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> @@ -108,6 +124,13 @@
> __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
>
> +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> +
> #else /* CONFIG_RISCV_ALTERNATIVE */
> #ifdef __ASSEMBLY__
>
> @@ -152,15 +175,28 @@
> _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
>
> /*
> - * A vendor wants to replace an old_content, but another vendor has used
> - * ALTERNATIVE() to patch its customized content at the same location. In
> - * this case, this vendor can create a new macro ALTERNATIVE_2() based
> - * on the following sample code and then replace ALTERNATIVE() with
> - * ALTERNATIVE_2() to append its customized content.
> + * ALTERNATIVE_x macros allow providing multiple replacement options
> + * for an ALTERNATIVE code section. This is helpful if multiple
> + * implementation variants for the same functionality exist for
> + * different cpu cores.
> + *
> + * Usage:
> + * ALTERNATIVE_x(old_content,
> + * new_content1, vendor_id1, errata_id1, CONFIG_k1,
> + * new_content2, vendor_id2, errata_id2, CONFIG_k2,
> + * ...
> + * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
> */
> #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
> _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
>
> +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
> +
> #endif
>
Hi Prabhakar,
On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <[email protected]> wrote:
> From: Lad Prabhakar <[email protected]>
>
> Introduce ALTERNATIVE_3() macro.
>
> A vendor wants to replace an old_content, but another vendor has used
> ALTERNATIVE_2() to patch its customized content at the same location.
> In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
>
> While at it update comment above ALTERNATIVE_2() macro and make it generic
> so that the comment holds good for any new addition of ALTERNATIVE_X()
> macros.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> ---
> v4->v5
> * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> * Updated comment for ALTERNATIVE_x() as suggested by Heiko
Thanks for the update!
> --- a/arch/riscv/include/asm/alternative-macros.h
> +++ b/arch/riscv/include/asm/alternative-macros.h
> @@ -50,8 +50,17 @@
> ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> .endm
>
> +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3
> + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> +.endm
> +
> #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
>
> #else /* !__ASSEMBLY__ */
>
> @@ -98,6 +107,13 @@
> __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
>
> +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> +
> #endif /* __ASSEMBLY__ */
>
> #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> @@ -108,6 +124,13 @@
> __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
>
> +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> +
> #else /* CONFIG_RISCV_ALTERNATIVE */
To avoid breaking the build for K210 (and VexRiscv), you need to provide
_ALTERNATIVE_CFG_3() for the !CONFIG_RISCV_ALTERNATIVE case, too:
@@ -144,6 +144,9 @@
#define _ALTERNATIVE_CFG_2(old_c, ...) \
ALTERNATIVE_CFG old_c
+#define _ALTERNATIVE_CFG_3(old_c, ...) \
+ ALTERNATIVE_CFG old_c
+
#else /* !__ASSEMBLY__ */
#define __ALTERNATIVE_CFG(old_c) \
@@ -155,6 +158,9 @@
#define _ALTERNATIVE_CFG_2(old_c, ...) \
__ALTERNATIVE_CFG(old_c)
+#define _ALTERNATIVE_CFG_3(old_c, ...) \
+ __ALTERNATIVE_CFG(old_c)
+
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_RISCV_ALTERNATIVE */
Else it fails (on riscv/for-next) with:
arch/riscv/mm/pmem.c: In function ‘arch_wb_cache_pmem’:
arch/riscv/include/asm/alternative-macros.h:198:8: error: expected
string literal before ‘_ALTERNATIVE_CFG_3’
198 | _ALTERNATIVE_CFG_3(old_content, new_content_1,
vendor_id_1, errata_id_1, CONFIG_k_1, \
| ^~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/errata_list.h:128:14: note: in expansion of
macro ‘ALTERNATIVE_3’
128 | asm volatile(ALTERNATIVE_3( \
| ^~~~~~~~~~~~~
arch/riscv/mm/pmem.c:13:2: note: in expansion of macro ‘ALT_CMO_OP’
13 | ALT_CMO_OP(clean, addr, size, riscv_cbom_block_size, 0, 0);
| ^~~~~~~~~~
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
Thank you for the review.
On Tue, Dec 13, 2022 at 5:21 PM Geert Uytterhoeven <[email protected]> wrote:
>
> Hi Prabhakar,
>
> On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <[email protected]> wrote:
> > From: Lad Prabhakar <[email protected]>
> >
> > Introduce ALTERNATIVE_3() macro.
> >
> > A vendor wants to replace an old_content, but another vendor has used
> > ALTERNATIVE_2() to patch its customized content at the same location.
> > In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> >
> > While at it update comment above ALTERNATIVE_2() macro and make it generic
> > so that the comment holds good for any new addition of ALTERNATIVE_X()
> > macros.
> >
> > Signed-off-by: Lad Prabhakar <[email protected]>
> > ---
> > v4->v5
> > * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> > * Updated comment for ALTERNATIVE_x() as suggested by Heiko
>
> Thanks for the update!
>
> > --- a/arch/riscv/include/asm/alternative-macros.h
> > +++ b/arch/riscv/include/asm/alternative-macros.h
> > @@ -50,8 +50,17 @@
> > ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> > .endm
> >
> > +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > + new_c_3, vendor_id_3, errata_id_3, enable_3
> > + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> > + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> > + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> > +.endm
> > +
> > #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> > #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> > +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
> >
> > #else /* !__ASSEMBLY__ */
> >
> > @@ -98,6 +107,13 @@
> > __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> > ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
> >
> > +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> > + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> > + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> > +
> > #endif /* __ASSEMBLY__ */
> >
> > #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> > @@ -108,6 +124,13 @@
> > __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
> >
> > +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> > + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> > +
> > #else /* CONFIG_RISCV_ALTERNATIVE */
>
> To avoid breaking the build for K210 (and VexRiscv), you need to provide
> _ALTERNATIVE_CFG_3() for the !CONFIG_RISCV_ALTERNATIVE case, too:
>
Thanks for testing this.
> @@ -144,6 +144,9 @@
> #define _ALTERNATIVE_CFG_2(old_c, ...) \
> ALTERNATIVE_CFG old_c
>
> +#define _ALTERNATIVE_CFG_3(old_c, ...) \
> + ALTERNATIVE_CFG old_c
> +
> #else /* !__ASSEMBLY__ */
>
> #define __ALTERNATIVE_CFG(old_c) \
> @@ -155,6 +158,9 @@
> #define _ALTERNATIVE_CFG_2(old_c, ...) \
> __ALTERNATIVE_CFG(old_c)
>
> +#define _ALTERNATIVE_CFG_3(old_c, ...) \
> + __ALTERNATIVE_CFG(old_c)
> +
> #endif /* __ASSEMBLY__ */
> #endif /* CONFIG_RISCV_ALTERNATIVE */
>
> Else it fails (on riscv/for-next) with:
>
I'll include the above hunk in next version.
> arch/riscv/mm/pmem.c: In function ‘arch_wb_cache_pmem’:
> arch/riscv/include/asm/alternative-macros.h:198:8: error: expected
> string literal before ‘_ALTERNATIVE_CFG_3’
> 198 | _ALTERNATIVE_CFG_3(old_content, new_content_1,
> vendor_id_1, errata_id_1, CONFIG_k_1, \
> | ^~~~~~~~~~~~~~~~~~
> arch/riscv/include/asm/errata_list.h:128:14: note: in expansion of
> macro ‘ALTERNATIVE_3’
> 128 | asm volatile(ALTERNATIVE_3( \
> | ^~~~~~~~~~~~~
> arch/riscv/mm/pmem.c:13:2: note: in expansion of macro ‘ALT_CMO_OP’
> 13 | ALT_CMO_OP(clean, addr, size, riscv_cbom_block_size, 0, 0);
> | ^~~~~~~~~~
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
On Tue, Dec 13, 2022 at 05:49:32PM +0000, Lad, Prabhakar wrote:
> Hi Geert,
>
> Thank you for the review.
>
> On Tue, Dec 13, 2022 at 5:21 PM Geert Uytterhoeven <[email protected]> wrote:
> >
> > Hi Prabhakar,
> >
> > On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <[email protected]> wrote:
> > > From: Lad Prabhakar <[email protected]>
> > >
> > > Introduce ALTERNATIVE_3() macro.
> > >
> > > A vendor wants to replace an old_content, but another vendor has used
> > > ALTERNATIVE_2() to patch its customized content at the same location.
> > > In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> > > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> > >
> > > While at it update comment above ALTERNATIVE_2() macro and make it generic
> > > so that the comment holds good for any new addition of ALTERNATIVE_X()
> > > macros.
> > >
> > > Signed-off-by: Lad Prabhakar <[email protected]>
> > > ---
> > > v4->v5
> > > * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> > > * Updated comment for ALTERNATIVE_x() as suggested by Heiko
> >
> > Thanks for the update!
> >
> > > --- a/arch/riscv/include/asm/alternative-macros.h
> > > +++ b/arch/riscv/include/asm/alternative-macros.h
> > > @@ -50,8 +50,17 @@
> > > ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> > > .endm
> > >
> > > +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > > + new_c_3, vendor_id_3, errata_id_3, enable_3
> > > + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> > > + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> > > + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> > > +.endm
> > > +
> > > #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> > > #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> > > +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
> > >
> > > #else /* !__ASSEMBLY__ */
> > >
> > > @@ -98,6 +107,13 @@
> > > __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> > > ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
> > >
> > > +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > > + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> > > + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > > + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> > > + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> > > +
> > > #endif /* __ASSEMBLY__ */
> > >
> > > #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> > > @@ -108,6 +124,13 @@
> > > __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > > new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
> > >
> > > +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > > + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > > + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > > + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> > > + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> > > +
> > > #else /* CONFIG_RISCV_ALTERNATIVE */
> >
> > To avoid breaking the build for K210 (and VexRiscv), you need to provide
> > _ALTERNATIVE_CFG_3() for the !CONFIG_RISCV_ALTERNATIVE case, too:
> >
> Thanks for testing this.
>
> > @@ -144,6 +144,9 @@
> > #define _ALTERNATIVE_CFG_2(old_c, ...) \
> > ALTERNATIVE_CFG old_c
> >
> > +#define _ALTERNATIVE_CFG_3(old_c, ...) \
> > + ALTERNATIVE_CFG old_c
> > +
> > #else /* !__ASSEMBLY__ */
> >
> > #define __ALTERNATIVE_CFG(old_c) \
> > @@ -155,6 +158,9 @@
> > #define _ALTERNATIVE_CFG_2(old_c, ...) \
> > __ALTERNATIVE_CFG(old_c)
> >
> > +#define _ALTERNATIVE_CFG_3(old_c, ...) \
> > + __ALTERNATIVE_CFG(old_c)
> > +
> > #endif /* __ASSEMBLY__ */
> > #endif /* CONFIG_RISCV_ALTERNATIVE */
> >
> > Else it fails (on riscv/for-next) with:
> >
> I'll include the above hunk in next version.
Yes, those two hunks are in my example in [1] as well.
[1] https://lore.kernel.org/all/[email protected]/
Thanks,
drew
>
> > arch/riscv/mm/pmem.c: In function ‘arch_wb_cache_pmem’:
> > arch/riscv/include/asm/alternative-macros.h:198:8: error: expected
> > string literal before ‘_ALTERNATIVE_CFG_3’
> > 198 | _ALTERNATIVE_CFG_3(old_content, new_content_1,
> > vendor_id_1, errata_id_1, CONFIG_k_1, \
> > | ^~~~~~~~~~~~~~~~~~
> > arch/riscv/include/asm/errata_list.h:128:14: note: in expansion of
> > macro ‘ALTERNATIVE_3’
> > 128 | asm volatile(ALTERNATIVE_3( \
> > | ^~~~~~~~~~~~~
> > arch/riscv/mm/pmem.c:13:2: note: in expansion of macro ‘ALT_CMO_OP’
> > 13 | ALT_CMO_OP(clean, addr, size, riscv_cbom_block_size, 0, 0);
> > | ^~~~~~~~~~
> >
> > Gr{oetje,eeting}s,
> >
> > Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> > -- Linus Torvalds
On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote:
> From: Lad Prabhakar <[email protected]>
>
> Introduce ALTERNATIVE_3() macro.
>
> A vendor wants to replace an old_content, but another vendor has used
> ALTERNATIVE_2() to patch its customized content at the same location.
> In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
>
> While at it update comment above ALTERNATIVE_2() macro and make it generic
> so that the comment holds good for any new addition of ALTERNATIVE_X()
> macros.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> ---
> v4->v5
> * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> * Updated comment for ALTERNATIVE_x() as suggested by Heiko
>
> RFC v3 -> v4
> * New patch
> ---
> arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
> 1 file changed, 41 insertions(+), 5 deletions(-)
>
> diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
> index 7226e2462584..a5b4691520da 100644
> --- a/arch/riscv/include/asm/alternative-macros.h
> +++ b/arch/riscv/include/asm/alternative-macros.h
> @@ -50,8 +50,17 @@
> ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> .endm
>
> +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3
> + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> +.endm
> +
> #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
>
> #else /* !__ASSEMBLY__ */
>
> @@ -98,6 +107,13 @@
> __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
>
> +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> +
> #endif /* __ASSEMBLY__ */
>
> #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> @@ -108,6 +124,13 @@
> __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
>
> +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> +
> #else /* CONFIG_RISCV_ALTERNATIVE */
> #ifdef __ASSEMBLY__
>
> @@ -152,15 +175,28 @@
> _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
>
> /*
> - * A vendor wants to replace an old_content, but another vendor has used
> - * ALTERNATIVE() to patch its customized content at the same location. In
> - * this case, this vendor can create a new macro ALTERNATIVE_2() based
> - * on the following sample code and then replace ALTERNATIVE() with
> - * ALTERNATIVE_2() to append its customized content.
> + * ALTERNATIVE_x macros allow providing multiple replacement options
> + * for an ALTERNATIVE code section. This is helpful if multiple
> + * implementation variants for the same functionality exist for
> + * different cpu cores.
I think this last sentence should be:
"This is helpful if multiple implementation variants exist for the same
functionality."
I don't think CPU cores is the right level of "granularity".
> + *
> + * Usage:
> + * ALTERNATIVE_x(old_content,
> + * new_content1, vendor_id1, errata_id1, CONFIG_k1,
> + * new_content2, vendor_id2, errata_id2, CONFIG_k2,
> + * ...
> + * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
> */
> #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
> _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
>
> +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
btw, why is this indented with spaces when the line above it is indented
with tabs? (At least, that is how it appears in mutt).
With those minor bits & the suggested fixes from Drew/Geert:
Reviewed-by: Conor Dooley <[email protected]>
Thanks,
Conor.
> +
> #endif
> --
> 2.25.1
>
Hi Conor,
Thank you for the review.
On Sat, Dec 17, 2022 at 9:41 PM Conor Dooley <[email protected]> wrote:
>
> On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote:
> > From: Lad Prabhakar <[email protected]>
> >
> > Introduce ALTERNATIVE_3() macro.
> >
> > A vendor wants to replace an old_content, but another vendor has used
> > ALTERNATIVE_2() to patch its customized content at the same location.
> > In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> >
> > While at it update comment above ALTERNATIVE_2() macro and make it generic
> > so that the comment holds good for any new addition of ALTERNATIVE_X()
> > macros.
> >
> > Signed-off-by: Lad Prabhakar <[email protected]>
> > ---
> > v4->v5
> > * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> > * Updated comment for ALTERNATIVE_x() as suggested by Heiko
> >
> > RFC v3 -> v4
> > * New patch
> > ---
> > arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
> > 1 file changed, 41 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
> > index 7226e2462584..a5b4691520da 100644
> > --- a/arch/riscv/include/asm/alternative-macros.h
> > +++ b/arch/riscv/include/asm/alternative-macros.h
> > @@ -50,8 +50,17 @@
> > ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
> > .endm
> >
> > +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > + new_c_3, vendor_id_3, errata_id_3, enable_3
> > + ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1, \
> > + \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> > + ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> > +.endm
> > +
> > #define __ALTERNATIVE_CFG(...) ALTERNATIVE_CFG __VA_ARGS__
> > #define __ALTERNATIVE_CFG_2(...) ALTERNATIVE_CFG_2 __VA_ARGS__
> > +#define __ALTERNATIVE_CFG_3(...) ALTERNATIVE_CFG_3 __VA_ARGS__
> >
> > #else /* !__ASSEMBLY__ */
> >
> > @@ -98,6 +107,13 @@
> > __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1) \
> > ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
> >
> > +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2, \
> > + new_c_3, vendor_id_3, errata_id_3, enable_3) \
> > + __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> > + new_c_2, vendor_id_2, errata_id_2, enable_2) \
> > + ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> > +
> > #endif /* __ASSEMBLY__ */
> >
> > #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> > @@ -108,6 +124,13 @@
> > __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
> >
> > +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > + new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > + new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > + __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1), \
> > + new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2), \
> > + new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> > +
> > #else /* CONFIG_RISCV_ALTERNATIVE */
> > #ifdef __ASSEMBLY__
> >
> > @@ -152,15 +175,28 @@
> > _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
> >
> > /*
> > - * A vendor wants to replace an old_content, but another vendor has used
> > - * ALTERNATIVE() to patch its customized content at the same location. In
> > - * this case, this vendor can create a new macro ALTERNATIVE_2() based
> > - * on the following sample code and then replace ALTERNATIVE() with
> > - * ALTERNATIVE_2() to append its customized content.
> > + * ALTERNATIVE_x macros allow providing multiple replacement options
> > + * for an ALTERNATIVE code section. This is helpful if multiple
> > + * implementation variants for the same functionality exist for
> > + * different cpu cores.
>
> I think this last sentence should be:
> "This is helpful if multiple implementation variants exist for the same
> functionality."
> I don't think CPU cores is the right level of "granularity".
>
Ok, I'll update it as above.
> > + *
> > + * Usage:
> > + * ALTERNATIVE_x(old_content,
> > + * new_content1, vendor_id1, errata_id1, CONFIG_k1,
> > + * new_content2, vendor_id2, errata_id2, CONFIG_k2,
> > + * ...
> > + * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
> > */
> > #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
> > _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
> >
> > +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
>
> btw, why is this indented with spaces when the line above it is indented
> with tabs? (At least, that is how it appears in mutt).
>
I'll update it with spaces.
> With those minor bits & the suggested fixes from Drew/Geert:
> Reviewed-by: Conor Dooley <[email protected]>
>
Cheers,
Prabhakar
On Mon, Dec 19, 2022 at 11:15:17AM +0000, Lad, Prabhakar wrote:
> > On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote:
> > > From: Lad Prabhakar <[email protected]>
> > >
> > > Introduce ALTERNATIVE_3() macro.
> > >
> > > A vendor wants to replace an old_content, but another vendor has used
> > > ALTERNATIVE_2() to patch its customized content at the same location.
> > > In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> > > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> > >
> > > While at it update comment above ALTERNATIVE_2() macro and make it generic
> > > so that the comment holds good for any new addition of ALTERNATIVE_X()
> > > macros.
> > >
> > > Signed-off-by: Lad Prabhakar <[email protected]>
> > > + *
> > > + * Usage:
> > > + * ALTERNATIVE_x(old_content,
> > > + * new_content1, vendor_id1, errata_id1, CONFIG_k1,
> > > + * new_content2, vendor_id2, errata_id2, CONFIG_k2,
> > > + * ...
> > > + * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
> > > */
> > > #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
> > > _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
> > >
> > > +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > > + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
> >
> > btw, why is this indented with spaces when the line above it is indented
> > with tabs? (At least, that is how it appears in mutt).
> >
> I'll update it with spaces.
The file uses tabs, so it'd be switching the spaces you added with tabs,
right?
Hi Conor,
On Mon, Dec 19, 2022 at 4:22 PM Conor Dooley <[email protected]> wrote:
>
> On Mon, Dec 19, 2022 at 11:15:17AM +0000, Lad, Prabhakar wrote:
> > > On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote:
> > > > From: Lad Prabhakar <[email protected]>
> > > >
> > > > Introduce ALTERNATIVE_3() macro.
> > > >
> > > > A vendor wants to replace an old_content, but another vendor has used
> > > > ALTERNATIVE_2() to patch its customized content at the same location.
> > > > In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> > > > ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> > > >
> > > > While at it update comment above ALTERNATIVE_2() macro and make it generic
> > > > so that the comment holds good for any new addition of ALTERNATIVE_X()
> > > > macros.
> > > >
> > > > Signed-off-by: Lad Prabhakar <[email protected]>
>
> > > > + *
> > > > + * Usage:
> > > > + * ALTERNATIVE_x(old_content,
> > > > + * new_content1, vendor_id1, errata_id1, CONFIG_k1,
> > > > + * new_content2, vendor_id2, errata_id2, CONFIG_k2,
> > > > + * ...
> > > > + * new_contentx, vendor_idx, errata_idx, CONFIG_kx)
> > > > */
> > > > #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2) \
> > > > _ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > > new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
> > > >
> > > > +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > > > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3) \
> > > > + _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1, \
> > > > + new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2, \
> > > > + new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
> > >
> > > btw, why is this indented with spaces when the line above it is indented
> > > with tabs? (At least, that is how it appears in mutt).
> > >
> > I'll update it with spaces.
>
> The file uses tabs, so it'd be switching the spaces you added with tabs,
> right?
My bad that was a typo, I meant tabs :p
Cheers,
Prabhakar