2014-12-03 23:13:09

by Lad, Prabhakar

Subject: [PATCH v3] media: platform: add VPFE capture driver support for AM437X

From: Benoit Parrot <[email protected]>

This patch adds Video Processing Front End (VPFE) driver for
AM437X family of devices
Driver supports the following:
- V4L2 API using MMAP buffer access based on videobuf2 api
- Asynchronous sensor/decoder sub device registration
- DT support

Signed-off-by: Benoit Parrot <[email protected]>
Signed-off-by: Darren Etheridge <[email protected]>
Signed-off-by: Lad, Prabhakar <[email protected]>
---
Changes for v3:
a> Fixed review comments pointed by Hans.

Following is the v4l2-compliance output:-
----------------------------------------

root@am437x-evm:~# ./v4l2-compliance -s -i 0 -vv
Driver Info:
Driver name : vpfe
[ 99.723462] vpfe 48328000.vpfe: ================= START STATUS =================

Bus info : platform:vpfe 48328000.vpfe
[ 99.735701] vpfe 48328000.vpfe: ================== END STATUS ==================
Driver version: 3.18.0
Capabilities : 0x85200[ 99.748824] vpfe 48328000.vpfe: invalid input index: 1
001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format

Compliance test for device /dev/video0 (not using libv4l2):

Required ioctls:
test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK

Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)

Test input 0:

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0

Format ioctls:
info: found 7 framesizes for pixel format 56595559
info: found 7 framesizes for pixel format 59565955
info: found 7 framesizes for pixel format 52424752
info: found 7 framesizes for pixel format 31384142
info: found 4 formats for buftype 1
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
info: Could not perform global format test
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
info: test buftype Video Capture
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK

Streaming ioctls:
test read/write: OK
Video Capture:
Buffer: 0 Sequence: 0 Field: None Timestamp: 104.346919s
Buffer: 1 Sequence: 1 Field: None Timestamp: 104.369798s
Buffer: 2 Sequence: 2 Field: None Timestamp: 104.392679s
Buffer: 3 Sequence: 3 Field: None Timestamp: 104.598605s
Buffer: 0 Sequence: 4 Field: None Timestamp: 104.621486s
Buffer: 1 Sequence: 5 Field: None Timestamp: 104.644364s
Buffer: 2 Sequence: 6 Field: None Timestamp: 104.667245s
Buffer: 3 Sequence: 7 Field: None Timestamp: 104.690126s
Buffer: 0 Sequence: 8 Field: None Timestamp: 104.713005s
Buffer: 1 Sequence: 9 Field: None Timestamp: 104.735885s
Buffer: 2 Sequence: 10 Field: None Timestamp: 104.758766s
Buffer: 3 Sequence: 11 Field: None Timestamp: 104.781648s
Buffer: 0 Sequence: 12 Field: None Timestamp: 104.804527s
Buffer: 1 Sequence: 13 Field: None Timestamp: 104.827407s
Buffer: 2 Sequence: 14 Field: None Timestamp: 104.850288s
Buffer: 3 Sequence: 15 Field: None Timestamp: 104.873168s
Buffer: 0 Sequence: 16 Field: None Timestamp: 104.896048s
Buffer: 1 Sequence: 17 Field: None Timestamp: 104.918928s
Buffer: 2 Sequence: 18 Field: None Timestamp: 104.941809s
Buffer: 3 Sequence: 19 Field: None Timestamp: 104.964689s
Buffer: 0 Sequence: 20 Field: None Timestamp: 104.987570s
Buffer: 1 Sequence: 21 Field: None Timestamp: 105.010450s
Buffer: 2 Sequence: 22 Field: None Timestamp: 105.033330s
Buffer: 3 Sequence: 23 Field: None Timestamp: 105.056212s
Buffer: 0 Sequence: 24 Field: None Timestamp: 105.079091s
Buffer: 1 Sequence: 25 Field: None Timestamp: 105.101971s
Buffer: 2 Sequence: 26 Field: None Timestamp: 105.124851s
Buffer: 3 Sequence: 27 Field: None Timestamp: 105.147732s
Buffer: 0 Sequence: 28 Field: None Timestamp: 105.170615s
Buffer: 1 Sequence: 29 Field: None Timestamp: 105.193493s
Buffer: 2 Sequence: 30 Field: None Timestamp: 105.216373s
Buffer: 3 Sequence: 31 Field: None Timestamp: 105.239253s
Buffer: 0 Sequence: 32 Field: None Timestamp: 105.262134s
Buffer: 1 Sequence: 33 Field: None Timestamp: 105.285014s
Buffer: 2 Sequence: 34 Field: None Timestamp: 105.307894s
Buffer: 3 Sequence: 35 Field: None Timestamp: 105.330775s
Buffer: 0 Sequence: 36 Field: None Timestamp: 105.353656s
Buffer: 1 Sequence: 37 Field: None Timestamp: 105.376536s
Buffer: 2 Sequence: 38 Field: None Timestamp: 105.399416s
Buffer: 3 Sequence: 39 Field: None Timestamp: 105.422297s
Buffer: 0 Sequence: 40 Field: None Timestamp: 105.445177s
Buffer: 1 Sequence: 41 Field: None Timestamp: 105.468057s
Buffer: 2 Sequence: 42 Field: None Timestamp: 105.490938s
Buffer: 3 Sequence: 43 Field: None Timestamp: 105.513818s
Buffer: 0 Sequence: 44 Field: None Timestamp: 105.536698s
Buffer: 1 Sequence: 45 Field: None Timestamp: 105.559578s
Buffer: 2 Sequence: 46 Field: None Timestamp: 105.582459s
Buffer: 3 Sequence: 47 Field: None Timestamp: 105.605339s
Buffer: 0 Sequence: 48 Field: None Timestamp: 105.628219s
Buffer: 1 Sequence: 49 Field: None Timestamp: 105.651101s
Buffer: 2 Sequence: 50 Field: None Timestamp: 105.673980s
Buffer: 3 Sequence: 51 Field: None Timestamp: 105.696860s
Buffer: 0 Sequence: 52 Field: None Timestamp: 105.719741s
Buffer: 1 Sequence: 53 Field: None Timestamp: 105.742622s
Buffer: 2 Sequence: 54 Field: None Timestamp: 105.765502s
Buffer: 3 Sequence: 55 Field: None Timestamp: 105.788382s
Buffer: 0 Sequence: 56 Field: None Timestamp: 105.811263s
Buffer: 1 Sequence: 57 Field: None Timestamp: 105.834143s
Buffer: 2 Sequence: 58 Field: None Timestamp: 105.857023s
Buffer: 3 Sequence: 59 Field: None Timestamp: 105.879903s
Video Capture (polling):
Buffer: 0 Sequence: 60 Field: None Timestamp: 105.902784s
Buffer: 1 Sequence: 61 Field: None Timestamp: 105.925664s
Buffer: 2 Sequence: 62 Field: None Timestamp: 105.948544s
Buffer: 3 Sequence: 63 Field: None Timestamp: 105.971426s
Buffer: 0 Sequence: 64 Field: None Timestamp: 105.994306s
Buffer: 1 Sequence: 65 Field: None Timestamp: 106.017186s
Buffer: 2 Sequence: 66 Field: None Timestamp: 106.040064s
Buffer: 3 Sequence: 67 Field: None Timestamp: 106.062947s
Buffer: 0 Sequence: 68 Field: None Timestamp: 106.085826s
Buffer: 1 Sequence: 69 Field: None Timestamp: 106.108707s
Buffer: 2 Sequence: 70 Field: None Timestamp: 106.131589s
Buffer: 3 Sequence: 71 Field: None Timestamp: 106.154467s
Buffer: 0 Sequence: 72 Field: None Timestamp: 106.177348s
Buffer: 1 Sequence: 73 Field: None Timestamp: 106.200229s
Buffer: 2 Sequence: 74 Field: None Timestamp: 106.223109s
Buffer: 3 Sequence: 75 Field: None Timestamp: 106.245989s
Buffer: 0 Sequence: 76 Field: None Timestamp: 106.268869s
Buffer: 1 Sequence: 77 Field: None Timestamp: 106.291749s
Buffer: 2 Sequence: 78 Field: None Timestamp: 106.314630s
Buffer: 3 Sequence: 79 Field: None Timestamp: 106.337510s
Buffer: 0 Sequence: 80 Field: None Timestamp: 106.360393s
Buffer: 1 Sequence: 81 Field: None Timestamp: 106.383271s
Buffer: 2 Sequence: 82 Field: None Timestamp: 106.406152s
Buffer: 3 Sequence: 83 Field: None Timestamp: 106.429032s
Buffer: 0 Sequence: 84 Field: None Timestamp: 106.451912s
Buffer: 1 Sequence: 85 Field: None Timestamp: 106.474792s
Buffer: 2 Sequence: 86 Field: None Timestamp: 106.497673s
Buffer: 3 Sequence: 87 Field: None Timestamp: 106.520554s
Buffer: 0 Sequence: 88 Field: None Timestamp: 106.543434s
Buffer: 1 Sequence: 89 Field: None Timestamp: 106.566314s
Buffer: 2 Sequence: 90 Field: None Timestamp: 106.589195s
Buffer: 3 Sequence: 91 Field: None Timestamp: 106.612075s
Buffer: 0 Sequence: 92 Field: None Timestamp: 106.634955s
Buffer: 1 Sequence: 93 Field: None Timestamp: 106.657836s
Buffer: 2 Sequence: 94 Field: None Timestamp: 106.680716s
Buffer: 3 Sequence: 95 Field: None Timestamp: 106.703596s
Buffer: 0 Sequence: 96 Field: None Timestamp: 106.726476s
Buffer: 1 Sequence: 97 Field: None Timestamp: 106.749357s
Buffer: 2 Sequence: 98 Field: None Timestamp: 106.772237s
Buffer: 3 Sequence: 99 Field: None Timestamp: 106.795121s
Buffer: 0 Sequence: 100 Field: None Timestamp: 106.817998s
Buffer: 1 Sequence: 101 Field: None Timestamp: 106.840879s
Buffer: 2 Sequence: 102 Field: None Timestamp: 106.863759s
Buffer: 3 Sequence: 103 Field: None Timestamp: 106.886639s
Buffer: 0 Sequence: 104 Field: None Timestamp: 106.909519s
Buffer: 1 Sequence: 105 Field: None Timestamp: 106.932399s
Buffer: 2 Sequence: 106 Field: None Timestamp: 106.955280s
Buffer: 3 Sequence: 107 Field: None Timestamp: 106.978160s
Buffer: 0 Sequence: 108 Field: None Timestamp: 107.001041s
Buffer: 1 Sequence: 109 Field: None Timestamp: 107.023922s
Buffer: 2 Sequence: 110 Field: None Timestamp: 107.046801s
Buffer: 3 Sequence: 111 Field: None Timestamp: 107.069682s
Buffer: 0 Sequence: 112 Field: None Timestamp: 107.092562s
Buffer: 1 Sequence: 113 Field: None Timestamp: 107.115442s
Buffer: 2 Sequence: 114 Field: None Timestamp: 107.138322s
Buffer: 3 Sequence: 115 Field: None Timestamp: 107.161204s
Buffer: 0 Sequence: 116 Field: None Timestamp: 107.184083s
Buffer: 1 Sequence: 117 Field: None Timestamp: 107.206964s
Buffer: 2 Sequence: 118 Field: None Timestamp: 107.229844s
Buffer: 3 Sequence: 119 Field: None Timestamp: 107.252724s
test MMAP: OK
test USERPTR: OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device

Total: 42, Succeeded: 42, Failed: 0, Warnings: 0

.../devicetree/bindings/media/ti-am437x-vpfe.txt | 61 +
MAINTAINERS | 9 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/am437x/Kconfig | 11 +
drivers/media/platform/am437x/Makefile | 2 +
drivers/media/platform/am437x/am437x-vpfe.c | 2779 ++++++++++++++++++++
drivers/media/platform/am437x/am437x-vpfe.h | 283 ++
drivers/media/platform/am437x/am437x-vpfe_regs.h | 140 +
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/am437x-vpfe.h | 122 +
11 files changed, 3411 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
create mode 100644 drivers/media/platform/am437x/Kconfig
create mode 100644 drivers/media/platform/am437x/Makefile
create mode 100644 drivers/media/platform/am437x/am437x-vpfe.c
create mode 100644 drivers/media/platform/am437x/am437x-vpfe.h
create mode 100644 drivers/media/platform/am437x/am437x-vpfe_regs.h
create mode 100644 include/uapi/linux/am437x-vpfe.h

diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 0000000..3932e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+ 0 - Raw Bayer Interface.
+ 1 - 8 Bit BT656 Interface.
+ 2 - 10 Bit BT656 Interface.
+ 3 - YCbCr 8 Bit Interface.
+ 4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ vpfe: vpfe@f0034000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe_pins_default>;
+ pinctrl-1 = <&vpfe_pins_sleep>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vpfe0_ep: endpoint {
+ remote-endpoint = <&ov2659_1>;
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
+ i2c1: i2c@4802a000 {
+
+ ov2659@30 {
+ compatible = "ti,ov2659";
+ reg = <0x30>;
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ bus-width = <8>;
+ mclk-frequency = <12000000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a6288ca..a42d367 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8537,6 +8537,15 @@ S: Maintained
F: drivers/media/platform/davinci/
F: include/media/davinci/

+TI AM437X VPFE DRIVER
+M: Lad, Prabhakar <[email protected]>
+L: [email protected]
+W: http://linuxtv.org/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/platform/am437x/
+
SIS 190 ETHERNET DRIVER
M: Francois Romieu <[email protected]>
L: [email protected]
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 0c61155..6d94045 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -126,6 +126,7 @@ config VIDEO_S3C_CAMIF
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
+source "drivers/media/platform/am437x/Kconfig"

endif # V4L_PLATFORM_DRIVERS

diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index b818afb..7bb6d46 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -49,4 +49,6 @@ obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/

obj-y += omap/

+obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/
+
ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/media/platform/am437x/Kconfig b/drivers/media/platform/am437x/Kconfig
new file mode 100644
index 0000000..97dea72
--- /dev/null
+++ b/drivers/media/platform/am437x/Kconfig
@@ -0,0 +1,11 @@
+config VIDEO_AM437X_VPFE
+ tristate "TI AM437x VPFE video capture driver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on SOC_AM43XX || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ help
+ Support for AM437x Video Processing Front End based Video
+ Capture Driver.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ti_vpfe.
diff --git a/drivers/media/platform/am437x/Makefile b/drivers/media/platform/am437x/Makefile
new file mode 100644
index 0000000..3c6b7bd
--- /dev/null
+++ b/drivers/media/platform/am437x/Makefile
@@ -0,0 +1,2 @@
+ti-vpfe-y := am437x-vpfe.o
+obj-$(CONFIG_VIDEO_AM437X_VPFE) += ti-vpfe.o
diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
new file mode 100644
index 0000000..25863e8
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -0,0 +1,2779 @@
+/*
+ * TI VPFE capture Driver
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <[email protected]>
+ * Lad, Prabhakar <[email protected]>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-of.h>
+
+#include "am437x-vpfe.h"
+
+#define VPFE_MODULE_NAME "vpfe"
+#define VPFE_VERSION "0.1.0"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-8");
+
+#define vpfe_dbg(level, dev, fmt, arg...) \
+ v4l2_dbg(level, debug, &dev->v4l2_dev, fmt, ##arg)
+#define vpfe_info(dev, fmt, arg...) \
+ v4l2_info(&dev->v4l2_dev, fmt, ##arg)
+#define vpfe_err(dev, fmt, arg...) \
+ v4l2_err(&dev->v4l2_dev, fmt, ##arg)
+
+/* standard information */
+struct vpfe_standard {
+ v4l2_std_id std_id;
+ unsigned int width;
+ unsigned int height;
+ struct v4l2_fract pixelaspect;
+ int frame_format;
+};
+
+const struct vpfe_standard vpfe_standards[] = {
+ {V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+ {V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+struct bus_format {
+ unsigned int width;
+ unsigned int bpp;
+};
+
+/*
+ * struct vpfe_fmt - VPFE media bus format information
+ * @name: V4L2 format description
+ * @code: V4L2 media bus format code
+ * @shifted: V4L2 media bus format code for the same pixel layout but
+ * shifted to be 8 bits per pixel. =0 if format is not shiftable.
+ * @pixelformat: V4L2 pixel format FCC identifier
+ * @width: Bits per pixel (when transferred over a bus)
+ * @bpp: Bytes per pixel (when stored in memory)
+ * @supported: Indicates format supported by subdev
+ */
+struct vpfe_fmt {
+ const char *name;
+ u32 fourcc;
+ u32 code;
+ struct bus_format l;
+ struct bus_format s;
+ bool supported;
+ u32 index;
+};
+
+static struct vpfe_fmt formats[] = {
+ {
+ .name = "YUV 4:2:2 packed, YCbYCr",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, CbYCrY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, YCrYCb",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "YUV 4:2:2 packed, CrYCbY",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "RAW8 BGGR",
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 GBRG",
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 GRBG",
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RAW8 RGGB",
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .l.width = 10,
+ .l.bpp = 2,
+ .s.width = 8,
+ .s.bpp = 1,
+ .supported = false,
+ }, {
+ .name = "RGB565 (LE)",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ }, {
+ .name = "RGB565 (BE)",
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .l.width = 10,
+ .l.bpp = 4,
+ .s.width = 8,
+ .s.bpp = 2,
+ .supported = false,
+ },
+};
+
+static int
+__vpfe_get_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp);
+
+static struct vpfe_fmt *find_format_by_code(unsigned int code)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->code == code)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static struct vpfe_fmt *find_format_by_pix(unsigned int pixelformat)
+{
+ struct vpfe_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->fourcc == pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void
+mbus_to_pix(struct vpfe_device *vpfe,
+ const struct v4l2_mbus_framefmt *mbus,
+ struct v4l2_pix_format *pix, unsigned int *bpp)
+{
+ struct vpfe_subdev_info *sdinfo = vpfe->current_subdev;
+ unsigned int bus_width = sdinfo->vpfe_param.bus_width;
+ struct vpfe_fmt *fmt;
+
+ fmt = find_format_by_code(mbus->code);
+ if (WARN_ON(fmt == NULL)) {
+ pr_err("Invalid mbus code set\n");
+ *bpp = 1;
+ return;
+ }
+
+ memset(pix, 0, sizeof(*pix));
+ v4l2_fill_pix_format(pix, mbus);
+ pix->pixelformat = fmt->fourcc;
+ *bpp = (bus_width == 10) ? fmt->l.bpp : fmt->s.bpp;
+
+ /* pitch should be 32 bytes aligned */
+ pix->bytesperline = ALIGN(pix->width * *bpp, 32);
+ pix->sizeimage = pix->bytesperline * pix->height;
+}
+
+static void pix_to_mbus(struct vpfe_device *vpfe,
+ struct v4l2_pix_format *pix_fmt,
+ struct v4l2_mbus_framefmt *mbus_fmt)
+{
+ struct vpfe_fmt *fmt;
+
+ fmt = find_format_by_pix(pix_fmt->pixelformat);
+ if (!fmt) {
+ /* default to first entry */
+ vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
+ pix_fmt->pixelformat);
+ fmt = &formats[0];
+ }
+
+ memset(mbus_fmt, 0, sizeof(*mbus_fmt));
+ v4l2_fill_mbus_format(mbus_fmt, pix_fmt, fmt->code);
+}
+
+/* Print Four-character-code (FOURCC) */
+static char *print_fourcc(u32 fmt)
+{
+ static char code[5];
+
+ code[0] = (unsigned char)(fmt & 0xff);
+ code[1] = (unsigned char)((fmt >> 8) & 0xff);
+ code[2] = (unsigned char)((fmt >> 16) & 0xff);
+ code[3] = (unsigned char)((fmt >> 24) & 0xff);
+ code[4] = '\0';
+
+ return code;
+}
+
+static int
+cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
+{
+ return lhs->type == rhs->type &&
+ lhs->fmt.pix.width == rhs->fmt.pix.width &&
+ lhs->fmt.pix.height == rhs->fmt.pix.height &&
+ lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
+ lhs->fmt.pix.field == rhs->fmt.pix.field &&
+ lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace;
+}
+
+static inline u32 vpfe_reg_read(struct vpfe_ccdc *ccdc, u32 offset)
+{
+ return ioread32(ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline void vpfe_reg_write(struct vpfe_ccdc *ccdc, u32 val, u32 offset)
+{
+ iowrite32(val, ccdc->ccdc_cfg.base_addr + offset);
+}
+
+static inline struct vpfe_device *to_vpfe(struct vpfe_ccdc *ccdc)
+{
+ return container_of(ccdc, struct vpfe_device, ccdc);
+}
+
+static inline struct vpfe_cap_buffer *to_vpfe_buffer(struct vb2_buffer *vb)
+{
+ return container_of(vb, struct vpfe_cap_buffer, vb);
+}
+
+static inline void vpfe_pcr_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ vpfe_reg_write(ccdc, !!flag, VPFE_PCR);
+}
+
+static void vpfe_config_enable(struct vpfe_ccdc *ccdc, int flag)
+{
+ unsigned int cfg;
+
+ if (!flag) {
+ cfg = vpfe_reg_read(ccdc, VPFE_CONFIG);
+ cfg &= ~(VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT);
+ } else {
+ cfg = VPFE_CONFIG_EN_ENABLE << VPFE_CONFIG_EN_SHIFT;
+ }
+
+ vpfe_reg_write(ccdc, cfg, VPFE_CONFIG);
+}
+
+static void vpfe_ccdc_setwin(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *image_win,
+ enum ccdc_frmfmt frm_fmt,
+ int bpp)
+{
+ int horz_start, horz_nr_pixels;
+ int vert_start, vert_nr_lines;
+ int val, mid_img;
+
+ /*
+ * ppc - per pixel count. indicates how many pixels per cell
+ * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+ * raw capture this is 1
+ */
+ horz_start = image_win->left * bpp;
+ horz_nr_pixels = (image_win->width * bpp) - 1;
+ vpfe_reg_write(ccdc, (horz_start << VPFE_HORZ_INFO_SPH_SHIFT) |
+ horz_nr_pixels, VPFE_HORZ_INFO);
+
+ vert_start = image_win->top;
+
+ if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ vert_nr_lines = (image_win->height >> 1) - 1;
+ vert_start >>= 1;
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ /* configure VDINT0 */
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT);
+ } else {
+ /* Since first line doesn't have any data */
+ vert_start += 1;
+ vert_nr_lines = image_win->height - 1;
+ /*
+ * configure VDINT0 and VDINT1. VDINT1 will be at half
+ * of image height
+ */
+ mid_img = vert_start + (image_win->height / 2);
+ val = (vert_start << VPFE_VDINT_VDINT0_SHIFT) |
+ (mid_img & VPFE_VDINT_VDINT1_MASK);
+ }
+
+ vpfe_reg_write(ccdc, val, VPFE_VDINT);
+
+ vpfe_reg_write(ccdc, (vert_start << VPFE_VERT_START_SLV0_SHIFT) |
+ vert_start, VPFE_VERT_START);
+ vpfe_reg_write(ccdc, vert_nr_lines, VPFE_VERT_LINES);
+}
+
+static void vpfe_reg_dump(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = to_vpfe(ccdc);
+
+ vpfe_dbg(3, vpfe, "ALAW: 0x%x\n", vpfe_reg_read(ccdc, VPFE_ALAW));
+ vpfe_dbg(3, vpfe, "CLAMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_CLAMP));
+ vpfe_dbg(3, vpfe, "DCSUB: 0x%x\n", vpfe_reg_read(ccdc, VPFE_DCSUB));
+ vpfe_dbg(3, vpfe, "BLKCMP: 0x%x\n", vpfe_reg_read(ccdc, VPFE_BLKCMP));
+ vpfe_dbg(3, vpfe, "COLPTN: 0x%x\n", vpfe_reg_read(ccdc, VPFE_COLPTN));
+ vpfe_dbg(3, vpfe, "SDOFST: 0x%x\n", vpfe_reg_read(ccdc, VPFE_SDOFST));
+ vpfe_dbg(3, vpfe, "SYN_MODE: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_SYNMODE));
+ vpfe_dbg(3, vpfe, "HSIZE_OFF: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HSIZE_OFF));
+ vpfe_dbg(3, vpfe, "HORZ_INFO: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_HORZ_INFO));
+ vpfe_dbg(3, vpfe, "VERT_START: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_START));
+ vpfe_dbg(3, vpfe, "VERT_LINES: 0x%x\n",
+ vpfe_reg_read(ccdc, VPFE_VERT_LINES));
+}
+
+static int
+vpfe_ccdc_validate_param(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *ccdcparam)
+{
+ struct vpfe_device *vpfe = to_vpfe(ccdc);
+ u8 max_gamma, max_data;
+
+ if (!ccdcparam->alaw.enable)
+ return 0;
+
+ max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd);
+ max_data = ccdc_data_size_max_bit(ccdcparam->data_sz);
+
+ if (ccdcparam->alaw.gamma_wd > VPFE_CCDC_GAMMA_BITS_09_0 ||
+ ccdcparam->alaw.gamma_wd < VPFE_CCDC_GAMMA_BITS_15_6 ||
+ max_gamma > max_data) {
+ vpfe_dbg(1, vpfe, "Invalid data line select\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+vpfe_ccdc_update_raw_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_config_params_raw *raw_params)
+{
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+
+ config_params = raw_params;
+}
+
+/*
+ * vpfe_ccdc_restore_defaults()
+ * This function will write defaults to all CCDC registers
+ */
+static void vpfe_ccdc_restore_defaults(struct vpfe_ccdc *ccdc)
+{
+ int i;
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+
+ /* set all registers to default value */
+ for (i = 4; i <= 0x94; i += 4)
+ vpfe_reg_write(ccdc, 0, i);
+
+ vpfe_reg_write(ccdc, VPFE_NO_CULLING, VPFE_CULLING);
+ vpfe_reg_write(ccdc, VPFE_CCDC_GAMMA_BITS_11_2, VPFE_ALAW);
+}
+
+static int vpfe_ccdc_close(struct vpfe_ccdc *ccdc, struct device *dev)
+{
+ int dma_cntl, i, pcr;
+
+ /* If the CCDC module is still busy wait for it to be done */
+ for (i = 0; i < 10; i++) {
+ usleep_range(5000, 6000);
+ pcr = vpfe_reg_read(ccdc, VPFE_PCR);
+ if (!pcr)
+ break;
+
+ /* make sure it it is disabled */
+ vpfe_pcr_enable(ccdc, 0);
+ }
+
+ /* Disable CCDC by resetting all register to default POR values */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* if DMA_CNTL overflow bit is set. Clear it
+ * It appears to take a while for this to become quiescent ~20ms
+ */
+ for (i = 0; i < 10; i++) {
+ dma_cntl = vpfe_reg_read(ccdc, VPFE_DMA_CNTL);
+ if (!(dma_cntl & VPFE_DMA_CNTL_OVERFLOW))
+ break;
+
+ /* Clear the overflow bit */
+ vpfe_reg_write(ccdc, dma_cntl, VPFE_DMA_CNTL);
+ usleep_range(5000, 6000);
+ }
+
+ /* Disabled the module at the CONFIG level */
+ vpfe_config_enable(ccdc, 0);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+
+static int vpfe_ccdc_set_params(struct vpfe_ccdc *ccdc, void __user *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw raw_params;
+ int x;
+
+ if (ccdc->ccdc_cfg.if_type != VPFE_RAW_BAYER)
+ return -EINVAL;
+
+ x = copy_from_user(&raw_params, params, sizeof(raw_params));
+ if (x) {
+ vpfe_dbg(1, vpfe,
+ "vpfe_ccdc_set_params: error in copying ccdc params, %d\n",
+ x);
+ return -EFAULT;
+ }
+
+ if (!vpfe_ccdc_validate_param(ccdc, &raw_params)) {
+ vpfe_ccdc_update_raw_params(ccdc, &raw_params);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * vpfe_ccdc_config_ycbcr()
+ * This function will configure CCDC for YCbCr video capture
+ */
+static void vpfe_ccdc_config_ycbcr(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct ccdc_params_ycbcr *params = &ccdc->ccdc_cfg.ycbcr;
+ u32 syn_mode;
+
+ vpfe_dbg(3, vpfe, "vpfe_ccdc_config_ycbcr:\n");
+ /*
+ * first restore the CCDC registers to default values
+ * This is important since we assume default values to be set in
+ * a lot of registers that we didn't touch
+ */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /*
+ * configure pixel format, frame format, configure video frame
+ * format, enable output to SDRAM, enable internal timing generator
+ * and 8bit pack mode
+ */
+ syn_mode = (((params->pix_fmt & VPFE_SYN_MODE_INPMOD_MASK) <<
+ VPFE_SYN_MODE_INPMOD_SHIFT) |
+ ((params->frm_fmt & VPFE_SYN_FLDMODE_MASK) <<
+ VPFE_SYN_FLDMODE_SHIFT) | VPFE_VDHDEN_ENABLE |
+ VPFE_WEN_ENABLE | VPFE_DATA_PACK_ENABLE);
+
+ /* setup BT.656 sync mode */
+ if (params->bt656_enable) {
+ vpfe_reg_write(ccdc, VPFE_REC656IF_BT656_EN, VPFE_REC656IF);
+
+ /*
+ * configure the FID, VD, HD pin polarity,
+ * fld,hd pol positive, vd negative, 8-bit data
+ */
+ syn_mode |= VPFE_SYN_MODE_VD_POL_NEGATIVE;
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ syn_mode |= VPFE_SYN_MODE_10BITS;
+ else
+ syn_mode |= VPFE_SYN_MODE_8BITS;
+ } else {
+ /* y/c external sync mode */
+ syn_mode |= (((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) <<
+ VPFE_HD_POL_SHIFT) |
+ ((params->vd_pol & VPFE_VD_POL_MASK) <<
+ VPFE_VD_POL_SHIFT));
+ }
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ /* configure video window */
+ vpfe_ccdc_setwin(ccdc, &params->win,
+ params->frm_fmt, params->bytesperpixel);
+
+ /*
+ * configure the order of y cb cr in SDRAM, and disable latch
+ * internal register on vsync
+ */
+ if (ccdc->ccdc_cfg.if_type == VPFE_BT656_10BIT)
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE |
+ VPFE_CCDCFG_BW656_10BIT, VPFE_CCDCFG);
+ else
+ vpfe_reg_write(ccdc,
+ (params->pix_order << VPFE_CCDCFG_Y8POS_SHIFT) |
+ VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * configure the horizontal line offset. This should be a
+ * on 32 byte boundary. So clear LSB 5 bits
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ /* configure the memory line offset */
+ if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+ /* two fields are interleaved in memory */
+ vpfe_reg_write(ccdc, VPFE_SDOFST_FIELD_INTERLEAVED,
+ VPFE_SDOFST);
+}
+
+static void
+vpfe_ccdc_config_black_clamp(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_clamp *bclamp)
+{
+ u32 val;
+
+ if (!bclamp->enable) {
+ /* configure DCSub */
+ val = (bclamp->dc_sub) & VPFE_BLK_DC_SUB_MASK;
+ vpfe_reg_write(ccdc, val, VPFE_DCSUB);
+ vpfe_reg_write(ccdc, VPFE_CLAMP_DEFAULT_VAL, VPFE_CLAMP);
+ return;
+ }
+ /*
+ * Configure gain, Start pixel, No of line to be avg,
+ * No of pixel/line to be avg, & Enable the Black clamping
+ */
+ val = ((bclamp->sgain & VPFE_BLK_SGAIN_MASK) |
+ ((bclamp->start_pixel & VPFE_BLK_ST_PXL_MASK) <<
+ VPFE_BLK_ST_PXL_SHIFT) |
+ ((bclamp->sample_ln & VPFE_BLK_SAMPLE_LINE_MASK) <<
+ VPFE_BLK_SAMPLE_LINE_SHIFT) |
+ ((bclamp->sample_pixel & VPFE_BLK_SAMPLE_LN_MASK) <<
+ VPFE_BLK_SAMPLE_LN_SHIFT) | VPFE_BLK_CLAMP_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_CLAMP);
+ /* If Black clamping is enable then make dcsub 0 */
+ vpfe_reg_write(ccdc, VPFE_DCSUB_DEFAULT_VAL, VPFE_DCSUB);
+}
+
+static void
+vpfe_ccdc_config_black_compense(struct vpfe_ccdc *ccdc,
+ struct vpfe_ccdc_black_compensation *bcomp)
+{
+ u32 val;
+
+ val = ((bcomp->b & VPFE_BLK_COMP_MASK) |
+ ((bcomp->gb & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GB_COMP_SHIFT) |
+ ((bcomp->gr & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_GR_COMP_SHIFT) |
+ ((bcomp->r & VPFE_BLK_COMP_MASK) <<
+ VPFE_BLK_COMP_R_COMP_SHIFT));
+ vpfe_reg_write(ccdc, val, VPFE_BLKCMP);
+}
+
+/*
+ * vpfe_ccdc_config_raw()
+ * This function will configure CCDC for Raw capture mode
+ */
+static void vpfe_ccdc_config_raw(struct vpfe_ccdc *ccdc)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+ struct vpfe_ccdc_config_params_raw *config_params =
+ &ccdc->ccdc_cfg.bayer.config_params;
+ struct ccdc_params_raw *params = &ccdc->ccdc_cfg.bayer;
+ unsigned int syn_mode;
+ unsigned int val;
+
+ vpfe_dbg(3, vpfe, "vpfe_ccdc_config_raw:\n");
+
+ /* Reset CCDC */
+ vpfe_ccdc_restore_defaults(ccdc);
+
+ /* Disable latching function registers on VSYNC */
+ vpfe_reg_write(ccdc, VPFE_LATCH_ON_VSYNC_DISABLE, VPFE_CCDCFG);
+
+ /*
+ * Configure the vertical sync polarity(SYN_MODE.VDPOL),
+ * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
+ * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
+ * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
+ * SDRAM, enable internal timing generator
+ */
+ syn_mode = (((params->vd_pol & VPFE_VD_POL_MASK) << VPFE_VD_POL_SHIFT) |
+ ((params->hd_pol & VPFE_HD_POL_MASK) << VPFE_HD_POL_SHIFT) |
+ ((params->fid_pol & VPFE_FID_POL_MASK) <<
+ VPFE_FID_POL_SHIFT) | ((params->frm_fmt &
+ VPFE_FRM_FMT_MASK) << VPFE_FRM_FMT_SHIFT) |
+ ((config_params->data_sz & VPFE_DATA_SZ_MASK) <<
+ VPFE_DATA_SZ_SHIFT) | ((params->pix_fmt &
+ VPFE_PIX_FMT_MASK) << VPFE_PIX_FMT_SHIFT) |
+ VPFE_WEN_ENABLE | VPFE_VDHDEN_ENABLE);
+
+ /* Enable and configure aLaw register if needed */
+ if (config_params->alaw.enable) {
+ val = ((config_params->alaw.gamma_wd &
+ VPFE_ALAW_GAMMA_WD_MASK) | VPFE_ALAW_ENABLE);
+ vpfe_reg_write(ccdc, val, VPFE_ALAW);
+ vpfe_dbg(3, vpfe, "\nWriting 0x%x to ALAW...\n", val);
+ }
+
+ /* Configure video window */
+ vpfe_ccdc_setwin(ccdc, &params->win, params->frm_fmt,
+ params->bytesperpixel);
+
+ /* Configure Black Clamp */
+ vpfe_ccdc_config_black_clamp(ccdc, &config_params->blk_clamp);
+
+ /* Configure Black level compensation */
+ vpfe_ccdc_config_black_compense(ccdc, &config_params->blk_comp);
+
+ /* If data size is 8 bit then pack the data */
+ if ((config_params->data_sz == VPFE_CCDC_DATA_8BITS) ||
+ config_params->alaw.enable)
+ syn_mode |= VPFE_DATA_PACK_ENABLE;
+
+ /*
+ * Configure Horizontal offset register. If pack 8 is enabled then
+ * 1 pixel will take 1 byte
+ */
+ vpfe_reg_write(ccdc, params->bytesperline, VPFE_HSIZE_OFF);
+
+ vpfe_dbg(3, vpfe, "Writing %d (%x) to HSIZE_OFF\n",
+ params->bytesperline, params->bytesperline);
+
+ /* Set value for SDOFST */
+ if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (params->image_invert_enable) {
+ /* For interlace inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_IMAGE_INVERT,
+ VPFE_SDOFST);
+ } else {
+ /* For interlace non inverse mode */
+ vpfe_reg_write(ccdc, VPFE_INTERLACED_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+ } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ vpfe_reg_write(ccdc, VPFE_PROGRESSIVE_NO_IMAGE_INVERT,
+ VPFE_SDOFST);
+ }
+
+ vpfe_reg_write(ccdc, syn_mode, VPFE_SYNMODE);
+
+ vpfe_reg_dump(ccdc);
+}
+
+static inline int
+vpfe_ccdc_set_buftype(struct vpfe_ccdc *ccdc,
+ enum ccdc_buftype buf_type)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.buf_type = buf_type;
+ else
+ ccdc->ccdc_cfg.ycbcr.buf_type = buf_type;
+
+ return 0;
+}
+
+static inline enum ccdc_buftype vpfe_ccdc_get_buftype(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.buf_type;
+
+ return ccdc->ccdc_cfg.ycbcr.buf_type;
+}
+
+static int vpfe_ccdc_set_pixel_format(struct vpfe_ccdc *ccdc, u32 pixfmt)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+
+ vpfe_dbg(1, vpfe, "vpfe_ccdc_set_pixel_format: if_type: %d, pixfmt:%s\n",
+ ccdc->ccdc_cfg.if_type, print_fourcc(pixfmt));
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ /*
+ * Need to clear it in case it was left on
+ * after the last capture.
+ */
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 0;
+
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_SBGGR8:
+ ccdc->ccdc_cfg.bayer.config_params.alaw.enable = 1;
+ break;
+
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_RGB565X:
+ break;
+
+ case V4L2_PIX_FMT_SBGGR16:
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_YUYV:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+ break;
+
+ case V4L2_PIX_FMT_UYVY:
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static u32 vpfe_ccdc_get_pixel_format(struct vpfe_ccdc *ccdc)
+{
+ u32 pixfmt;
+
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ } else {
+ if (ccdc->ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+ pixfmt = V4L2_PIX_FMT_YUYV;
+ else
+ pixfmt = V4L2_PIX_FMT_UYVY;
+ }
+
+ return pixfmt;
+}
+
+static int
+vpfe_ccdc_set_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win, unsigned int bpp)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+ ccdc->ccdc_cfg.bayer.win = *win;
+ ccdc->ccdc_cfg.bayer.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.bayer.bytesperline = ALIGN(win->width * bpp, 32);
+ } else {
+ ccdc->ccdc_cfg.ycbcr.win = *win;
+ ccdc->ccdc_cfg.ycbcr.bytesperpixel = bpp;
+ ccdc->ccdc_cfg.ycbcr.bytesperline = ALIGN(win->width * bpp, 32);
+ }
+
+ return 0;
+}
+
+static inline void
+vpfe_ccdc_get_image_window(struct vpfe_ccdc *ccdc,
+ struct v4l2_rect *win)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ *win = ccdc->ccdc_cfg.bayer.win;
+ else
+ *win = ccdc->ccdc_cfg.ycbcr.win;
+}
+
+static inline unsigned int vpfe_ccdc_get_line_length(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.bytesperline;
+
+ return ccdc->ccdc_cfg.ycbcr.bytesperline;
+}
+
+static inline int
+vpfe_ccdc_set_frame_format(struct vpfe_ccdc *ccdc,
+ enum ccdc_frmfmt frm_fmt)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ ccdc->ccdc_cfg.bayer.frm_fmt = frm_fmt;
+ else
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
+
+ return 0;
+}
+
+static inline enum ccdc_frmfmt
+vpfe_ccdc_get_frame_format(struct vpfe_ccdc *ccdc)
+{
+ if (ccdc->ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ return ccdc->ccdc_cfg.bayer.frm_fmt;
+
+ return ccdc->ccdc_cfg.ycbcr.frm_fmt;
+}
+
+static inline int vpfe_ccdc_getfid(struct vpfe_ccdc *ccdc)
+{
+ return (vpfe_reg_read(ccdc, VPFE_SYNMODE) >> 15) & 1;
+}
+
+static inline void vpfe_set_sdr_addr(struct vpfe_ccdc *ccdc, unsigned long addr)
+{
+ vpfe_reg_write(ccdc, addr & 0xffffffe0, VPFE_SDR_ADDR);
+}
+
+static int vpfe_ccdc_set_hw_if_params(struct vpfe_ccdc *ccdc,
+ struct vpfe_hw_if_param *params)
+{
+ struct vpfe_device *vpfe = container_of(ccdc, struct vpfe_device, ccdc);
+
+ ccdc->ccdc_cfg.if_type = params->if_type;
+
+ switch (params->if_type) {
+ case VPFE_BT656:
+ case VPFE_YCBCR_SYNC_16:
+ case VPFE_YCBCR_SYNC_8:
+ case VPFE_BT656_10BIT:
+ ccdc->ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = params->hdpol;
+ break;
+
+ case VPFE_RAW_BAYER:
+ ccdc->ccdc_cfg.bayer.vd_pol = params->vdpol;
+ ccdc->ccdc_cfg.bayer.hd_pol = params->hdpol;
+ if (params->bus_width == 10)
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_10BITS;
+ else
+ ccdc->ccdc_cfg.bayer.config_params.data_sz =
+ VPFE_CCDC_DATA_8BITS;
+ vpfe_dbg(1, vpfe, "params.bus_width: %d\n",
+ params->bus_width);
+ vpfe_dbg(1, vpfe, "config_params.data_sz: %d\n",
+ ccdc->ccdc_cfg.bayer.config_params.data_sz);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void vpfe_clear_intr(struct vpfe_ccdc *ccdc, int vdint)
+{
+ unsigned int vpfe_int_status;
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ switch (vdint) {
+ /* VD0 interrupt */
+ case VPFE_VDINT0:
+ vpfe_int_status &= ~VPFE_VDINT0;
+ vpfe_int_status |= VPFE_VDINT0;
+ break;
+
+ /* VD1 interrupt */
+ case VPFE_VDINT1:
+ vpfe_int_status &= ~VPFE_VDINT1;
+ vpfe_int_status |= VPFE_VDINT1;
+ break;
+
+ /* VD2 interrupt */
+ case VPFE_VDINT2:
+ vpfe_int_status &= ~VPFE_VDINT2;
+ vpfe_int_status |= VPFE_VDINT2;
+ break;
+
+ /* Clear all interrupts */
+ default:
+ vpfe_int_status &= ~(VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ vpfe_int_status |= (VPFE_VDINT0 |
+ VPFE_VDINT1 |
+ VPFE_VDINT2);
+ break;
+ }
+ /* Clear specific VDINT from the status register */
+ vpfe_reg_write(ccdc, vpfe_int_status, VPFE_IRQ_STS);
+
+ vpfe_int_status = vpfe_reg_read(ccdc, VPFE_IRQ_STS);
+
+ /* Acknowledge that we are done with all interrupts */
+ vpfe_reg_write(ccdc, 1, VPFE_IRQ_EOI);
+}
+
+static void vpfe_ccdc_config_defaults(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_cfg.if_type = VPFE_RAW_BAYER;
+
+ ccdc->ccdc_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+ ccdc->ccdc_cfg.ycbcr.frm_fmt = CCDC_FRMFMT_INTERLACED;
+ ccdc->ccdc_cfg.ycbcr.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.hd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+ ccdc->ccdc_cfg.ycbcr.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED;
+
+ ccdc->ccdc_cfg.ycbcr.win.left = 0;
+ ccdc->ccdc_cfg.ycbcr.win.top = 0;
+ ccdc->ccdc_cfg.ycbcr.win.width = 720;
+ ccdc->ccdc_cfg.ycbcr.win.height = 576;
+ ccdc->ccdc_cfg.ycbcr.bt656_enable = 1;
+
+ ccdc->ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+ ccdc->ccdc_cfg.bayer.frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ ccdc->ccdc_cfg.bayer.fid_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.vd_pol = VPFE_PINPOL_POSITIVE;
+ ccdc->ccdc_cfg.bayer.hd_pol = VPFE_PINPOL_POSITIVE;
+
+ ccdc->ccdc_cfg.bayer.win.left = 0;
+ ccdc->ccdc_cfg.bayer.win.top = 0;
+ ccdc->ccdc_cfg.bayer.win.width = 800;
+ ccdc->ccdc_cfg.bayer.win.height = 600;
+ ccdc->ccdc_cfg.bayer.config_params.data_sz = VPFE_CCDC_DATA_8BITS;
+ ccdc->ccdc_cfg.bayer.config_params.alaw.gamma_wd =
+ VPFE_CCDC_GAMMA_BITS_09_0;
+}
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe,
+ struct v4l2_format *f)
+{
+ struct v4l2_rect image_win;
+ enum ccdc_buftype buf_type;
+ enum ccdc_frmfmt frm_fmt;
+
+ memset(f, 0, sizeof(*f));
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win);
+ f->fmt.pix.width = image_win.width;
+ f->fmt.pix.height = image_win.height;
+ f->fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
+ f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+ f->fmt.pix.height;
+ buf_type = vpfe_ccdc_get_buftype(&vpfe->ccdc);
+ f->fmt.pix.pixelformat = vpfe_ccdc_get_pixel_format(&vpfe->ccdc);
+ frm_fmt = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+
+ if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ } else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+ if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
+ f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ } else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) {
+ f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+ } else {
+ vpfe_err(vpfe, "Invalid buf_type\n");
+ return -EINVAL;
+ }
+ } else {
+ vpfe_err(vpfe, "Invalid frm_fmt\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe)
+{
+ enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_config_ccdc_image_format\n");
+
+ vpfe_dbg(1, vpfe, "pixelformat: %s\n",
+ print_fourcc(vpfe->fmt.fmt.pix.pixelformat));
+
+ if (vpfe_ccdc_set_pixel_format(&vpfe->ccdc,
+ vpfe->fmt.fmt.pix.pixelformat) < 0) {
+ vpfe_err(vpfe, "couldn't set pix format in ccdc\n");
+ return -EINVAL;
+ }
+
+ /* configure the image window */
+ vpfe_ccdc_set_image_window(&vpfe->ccdc, &vpfe->crop, vpfe->bpp);
+
+ switch (vpfe->fmt.fmt.pix.field) {
+ case V4L2_FIELD_INTERLACED:
+ /* do nothing, since it is default */
+ ret = vpfe_ccdc_set_buftype(
+ &vpfe->ccdc,
+ CCDC_BUFTYPE_FLD_INTERLEAVED);
+ break;
+
+ case V4L2_FIELD_NONE:
+ frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+ /* buffer type only applicable for interlaced scan */
+ break;
+
+ case V4L2_FIELD_SEQ_TB:
+ ret = vpfe_ccdc_set_buftype(
+ &vpfe->ccdc,
+ CCDC_BUFTYPE_FLD_SEPARATED);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ return vpfe_ccdc_set_frame_format(&vpfe->ccdc, frm_fmt);
+}
+
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc. It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_mbus_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe,
+ v4l2_std_id std_id)
+{
+ struct v4l2_pix_format *pix = &vpfe->fmt.fmt.pix;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+ if (vpfe_standards[i].std_id & std_id) {
+ vpfe->std_info.active_pixels =
+ vpfe_standards[i].width;
+ vpfe->std_info.active_lines =
+ vpfe_standards[i].height;
+ vpfe->std_info.frame_format =
+ vpfe_standards[i].frame_format;
+ vpfe->std_index = i;
+
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpfe_standards)) {
+ vpfe_err(vpfe, "standard not supported\n");
+ return -EINVAL;
+ }
+
+ vpfe->crop.top = vpfe->crop.left = 0;
+ vpfe->crop.width = vpfe->std_info.active_pixels;
+ vpfe->crop.height = vpfe->std_info.active_lines;
+ pix->width = vpfe->crop.width;
+ pix->height = vpfe->crop.height;
+ pix->pixelformat = V4L2_PIX_FMT_YUYV;
+
+ /* first field and frame format based on standard frame format */
+ if (vpfe->std_info.frame_format)
+ pix->field = V4L2_FIELD_INTERLACED;
+ else
+ pix->field = V4L2_FIELD_NONE;
+
+ ret = __vpfe_get_format(vpfe, &vpfe->fmt, &vpfe->bpp);
+ if (ret)
+ return ret;
+
+ /* Update the crop window based on found values */
+ vpfe->crop.width = pix->width;
+ vpfe->crop.height = pix->height;
+
+ return vpfe_config_ccdc_image_format(vpfe);
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe)
+{
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ sdinfo = &vpfe->cfg->sub_devs[0];
+ sdinfo->sd = vpfe->sd[0];
+ vpfe->current_input = 0;
+ vpfe->std_index = 0;
+ /* Configure the default format information */
+ ret = vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+ if (ret)
+ return ret;
+
+ pm_runtime_get_sync(vpfe->pdev);
+
+ vpfe_config_enable(&vpfe->ccdc, 1);
+
+ vpfe_ccdc_restore_defaults(&vpfe->ccdc);
+
+ /* Clear all VPFE interrupts */
+ vpfe_clear_intr(&vpfe->ccdc, -1);
+
+ return ret;
+}
+
+/*
+ * vpfe_release : This function is based on the vb2_fop_release
+ * helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+static int vpfe_release(struct file *file)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_release\n");
+
+ ret = _vb2_fop_release(file, NULL);
+
+ if (v4l2_fh_is_singular_file(file)) {
+ mutex_lock(&vpfe->lock);
+ vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
+ v4l2_fh_release(file);
+ mutex_unlock(&vpfe->lock);
+ }
+
+ return ret;
+}
+
+/*
+ * vpfe_open : This function is based on the v4l2_fh_open helper function.
+ * It has been augmented to handle module power management,
+ * by disabling/enabling h/w module fcntl clock when necessary.
+ */
+static int vpfe_open(struct file *file)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ ret = v4l2_fh_open(file);
+ if (ret) {
+ vpfe_err(vpfe, "v4l2_fh_open failed\n");
+ return ret;
+ }
+
+ if (!v4l2_fh_is_singular_file(file))
+ return 0;
+
+ mutex_lock(&vpfe->lock);
+ if (vpfe_initialize_device(vpfe)) {
+ mutex_unlock(&vpfe->lock);
+ v4l2_fh_release(file);
+ return -ENODEV;
+ }
+ mutex_unlock(&vpfe->lock);
+
+ return 0;
+}
+
+/**
+ * vpfe_schedule_next_buffer: set next buffer address for capture
+ * @vpfe : ptr to vpfe device
+ *
+ * This function will get next buffer from the dma queue and
+ * set the buffer address in the vpfe register for capture.
+ * the buffer is marked active
+ *
+ * Assumes caller is holding vpfe->dma_queue_lock already
+ */
+static inline void vpfe_schedule_next_buffer(struct vpfe_device *vpfe)
+{
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc,
+ vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0));
+}
+
+static inline void vpfe_schedule_bottom_field(struct vpfe_device *vpfe)
+{
+ unsigned long addr;
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->next_frm->vb, 0) +
+ vpfe->field_off;
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, addr);
+}
+
+/*
+ * vpfe_process_buffer_complete: process a completed buffer
+ * @vpfe : ptr to vpfe device
+ *
+ * This function time stamp the buffer and mark it as DONE. It also
+ * wake up any process waiting on the QUEUE and set the next buffer
+ * as current
+ */
+static inline void vpfe_process_buffer_complete(struct vpfe_device *vpfe)
+{
+ v4l2_get_timestamp(&vpfe->cur_frm->vb.v4l2_buf.timestamp);
+ vpfe->cur_frm->vb.v4l2_buf.field = vpfe->fmt.fmt.pix.field;
+ vpfe->cur_frm->vb.v4l2_buf.sequence = vpfe->sequence++;
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_DONE);
+ vpfe->cur_frm = vpfe->next_frm;
+}
+
+/*
+ * vpfe_isr : ISR handler for vpfe capture (VINT0)
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in VPFE registers
+ */
+static irqreturn_t vpfe_isr(int irq, void *dev)
+{
+ struct vpfe_device *vpfe = (struct vpfe_device *)dev;
+ enum v4l2_field field;
+ int intr_status;
+ int fid;
+
+ intr_status = vpfe_reg_read(&vpfe->ccdc, VPFE_IRQ_STS);
+
+ if (intr_status & VPFE_VDINT0) {
+ field = vpfe->fmt.fmt.pix.field;
+
+ if (field == V4L2_FIELD_NONE) {
+ /* handle progressive frame capture */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ goto next_intr;
+ }
+
+ /* interlaced or TB capture check which field
+ we are in hardware */
+ fid = vpfe_ccdc_getfid(&vpfe->ccdc);
+
+ /* switch the software maintained field id */
+ vpfe->field ^= 1;
+ if (fid == vpfe->field) {
+ /* we are in-sync here,continue */
+ if (fid == 0) {
+ /*
+ * One frame is just being captured. If the
+ * next frame is available, release the
+ * current frame and move on
+ */
+ if (vpfe->cur_frm != vpfe->next_frm)
+ vpfe_process_buffer_complete(vpfe);
+ /*
+ * based on whether the two fields are stored
+ * interleave or separately in memory,
+ * reconfigure the CCDC memory address
+ */
+ if (field == V4L2_FIELD_SEQ_TB)
+ vpfe_schedule_bottom_field(vpfe);
+
+ goto next_intr;
+ }
+ /*
+ * if one field is just being captured configure
+ * the next frame get the next frame from the empty
+ * queue if no frame is available hold on to the
+ * current buffer
+ */
+ spin_lock(&vpfe->dma_queue_lock);
+ if (!list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ } else if (fid == 0) {
+ /*
+ * out of sync. Recover from any hardware out-of-sync.
+ * May loose one frame
+ */
+ vpfe->field = fid;
+ }
+ }
+
+next_intr:
+ if (intr_status & VPFE_VDINT1) {
+ spin_lock(&vpfe->dma_queue_lock);
+ if (vpfe->fmt.fmt.pix.field == V4L2_FIELD_NONE &&
+ !list_empty(&vpfe->dma_queue) &&
+ vpfe->cur_frm == vpfe->next_frm)
+ vpfe_schedule_next_buffer(vpfe);
+ spin_unlock(&vpfe->dma_queue_lock);
+ }
+
+ vpfe_clear_intr(&vpfe->ccdc, intr_status);
+
+ return IRQ_HANDLED;
+}
+
+static inline void vpfe_detach_irq(struct vpfe_device *vpfe)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_CLR);
+}
+
+static inline void vpfe_attach_irq(struct vpfe_device *vpfe)
+{
+ unsigned int intr = VPFE_VDINT0;
+ enum ccdc_frmfmt frame_format;
+
+ frame_format = vpfe_ccdc_get_frame_format(&vpfe->ccdc);
+ if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+ intr |= VPFE_VDINT1;
+
+ vpfe_reg_write(&vpfe->ccdc, intr, VPFE_IRQ_EN_SET);
+}
+
+static int vpfe_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_querycap\n");
+
+ strlcpy(cap->driver, VPFE_MODULE_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, "TI AM437x VPFE", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", vpfe->v4l2_dev.name);
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+/* get the format set at output pad of the adjacent subdev */
+static int __vpfe_get_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, get_fmt, NULL, &fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (!ret) {
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ } else {
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev,
+ sdinfo->grp_id,
+ video, g_mbus_fmt,
+ &mbus_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+ v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt);
+ mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
+ }
+
+ format->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe,
+ "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
+ __func__, format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+/* set the format at output pad of the adjacent subdev */
+static int __vpfe_set_format(struct vpfe_device *vpfe,
+ struct v4l2_format *format, unsigned int *bpp)
+{
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_subdev_format fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "__vpfe_set_format\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = 0;
+
+ pix_to_mbus(vpfe, &format->fmt.pix, &fmt.format);
+
+ ret = v4l2_subdev_call(sdinfo->sd, pad, set_fmt, NULL, &fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (!ret) {
+ v4l2_fill_pix_format(&format->fmt.pix, &fmt.format);
+ mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp);
+ } else {
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev,
+ sdinfo->grp_id,
+ video, s_mbus_fmt,
+ &mbus_fmt);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt);
+ mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp);
+ }
+
+ format->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe,
+ "%s size %dx%d (%s) bytesperline = %d, size = %d, bpp = %d\n",
+ __func__, format->fmt.pix.width, format->fmt.pix.height,
+ print_fourcc(format->fmt.pix.pixelformat),
+ format->fmt.pix.bytesperline, format->fmt.pix.sizeimage, *bpp);
+
+ return 0;
+}
+
+static int vpfe_g_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_g_fmt\n");
+
+ *fmt = vpfe->fmt;
+
+ return 0;
+}
+
+static int vpfe_enum_fmt(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_fmt *fmt = NULL;
+ unsigned int k;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_format index:%d\n",
+ f->index);
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ if (f->index > ARRAY_SIZE(formats))
+ return -EINVAL;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ if (formats[k].index == f->index) {
+ fmt = &formats[k];
+ break;
+ }
+ }
+ if (!fmt)
+ return -EINVAL;
+
+ strncpy(f->description, fmt->name, sizeof(f->description) - 1);
+ f->pixelformat = fmt->fourcc;
+ f->type = vpfe->fmt.type;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_format: mbus index: %d code: %x pixelformat: %s [%s]\n",
+ f->index, fmt->code, print_fourcc(fmt->fourcc), fmt->name);
+
+ return 0;
+}
+
+static int vpfe_try_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ unsigned int bpp;
+
+ vpfe_dbg(2, vpfe, "vpfe_try_fmt\n");
+
+ return __vpfe_get_format(vpfe, fmt, &bpp);
+}
+
+static int vpfe_s_fmt(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_format format;
+ unsigned int bpp;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_s_fmt\n");
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ ret = vpfe_try_fmt(file, priv, fmt);
+ if (ret)
+ return ret;
+
+
+ if (!cmp_v4l2_format(fmt, &format)) {
+ /* Sensor format is different from the requested format
+ * so we need to change it
+ */
+ ret = __vpfe_set_format(vpfe, fmt, &bpp);
+ if (ret)
+ return ret;
+ } else /* Just make sure all of the fields are consistent */
+ *fmt = format;
+
+ /* First detach any IRQ if currently attached */
+ vpfe_detach_irq(vpfe);
+ vpfe->fmt = *fmt;
+ vpfe->bpp = bpp;
+
+ /* Update the crop window based on found values */
+ vpfe->crop.width = fmt->fmt.pix.width;
+ vpfe->crop.height = fmt->fmt.pix.height;
+
+ /* set image capture parameters in the ccdc */
+ return vpfe_config_ccdc_image_format(vpfe);
+}
+
+static int vpfe_enum_size(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_subdev_frame_size_enum fse;
+ struct vpfe_subdev_info *sdinfo;
+ struct v4l2_mbus_framefmt mbus;
+ struct v4l2_pix_format pix;
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
+
+ /* check for valid format */
+ fmt = find_format_by_pix(fsize->pixel_format);
+ if (!fmt) {
+ vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
+ fsize->pixel_format);
+ return -EINVAL;
+ }
+
+ memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
+
+ sdinfo = vpfe->current_subdev;
+ if (!sdinfo->sd)
+ return -EINVAL;
+
+ memset(&pix, 0x0, sizeof(pix));
+ /* Construct pix from parameter and use default for the rest */
+ pix.pixelformat = fsize->pixel_format;
+ pix.width = 640;
+ pix.height = 480;
+ pix.colorspace = V4L2_COLORSPACE_SRGB;
+ pix.field = V4L2_FIELD_NONE;
+ pix_to_mbus(vpfe, &pix, &mbus);
+
+ memset(&fse, 0x0, sizeof(fse));
+ fse.index = fsize->index;
+ fse.pad = 0;
+ fse.code = mbus.code;
+ ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);
+ if (ret)
+ return -EINVAL;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
+ fse.index, fse.code, fse.min_width, fse.max_width,
+ fse.min_height, fse.max_height);
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = fse.max_width;
+ fsize->discrete.height = fse.max_height;
+
+ vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
+ fsize->index, print_fourcc(fsize->pixel_format),
+ fsize->discrete.width, fsize->discrete.height);
+
+ return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int
+vpfe_get_subdev_input_index(struct vpfe_device *vpfe,
+ int *subdev_index,
+ int *subdev_input_index,
+ int app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (app_input_index < (j + 1)) {
+ *subdev_index = i;
+ *subdev_input_index = app_input_index - j;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe,
+ int *app_input_index)
+{
+ struct vpfe_config *cfg = vpfe->cfg;
+ struct vpfe_subdev_info *sdinfo;
+ int i, j = 0;
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &cfg->sub_devs[i];
+ if (!strcmp(sdinfo->name, vpfe->current_subdev->name)) {
+ if (vpfe->current_input >= 1)
+ return -1;
+ *app_input_index = j + vpfe->current_input;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int subdev, index;
+
+ vpfe_dbg(2, vpfe, "vpfe_enum_input\n");
+
+ if (vpfe_get_subdev_input_index(vpfe, &subdev, &index,
+ inp->index) < 0) {
+ vpfe_dbg(1, vpfe,
+ "input information not found for the subdev\n");
+ return -EINVAL;
+ }
+ sdinfo = &vpfe->cfg->sub_devs[subdev];
+ *inp = sdinfo->inputs[index];
+
+ return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_g_input\n");
+
+ return vpfe_get_app_input_index(vpfe, index);
+}
+
+/* Assumes caller is holding vpfe_dev->lock */
+static int vpfe_set_input(struct vpfe_device *vpfe, unsigned int index)
+{
+ int subdev_index = 0, inp_index = 0;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_route *route;
+ u32 input, output;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_set_input: index: %d\n", index);
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+ ret = vpfe_get_subdev_input_index(vpfe,
+ &subdev_index,
+ &inp_index,
+ index);
+ if (ret < 0) {
+ vpfe_err(vpfe, "invalid input index: %d\n", index);
+ goto get_out;
+ }
+
+ sdinfo = &vpfe->cfg->sub_devs[subdev_index];
+ sdinfo->sd = vpfe->sd[subdev_index];
+ route = &sdinfo->routes[inp_index];
+ if (route && sdinfo->can_route) {
+ input = route->input;
+ output = route->output;
+ if (sdinfo->sd) {
+ ret = v4l2_subdev_call(sdinfo->sd, video,
+ s_routing, input, output, 0);
+ if (ret) {
+ vpfe_err(vpfe, "s_routing failed\n");
+ ret = -EINVAL;
+ goto get_out;
+ }
+ }
+
+ }
+
+ vpfe->current_subdev = sdinfo;
+ if (sdinfo->sd)
+ vpfe->v4l2_dev.ctrl_handler = sdinfo->sd->ctrl_handler;
+ vpfe->current_input = index;
+ vpfe->std_index = 0;
+
+ /* set the bus/interface parameter for the sub device in ccdc */
+ ret = vpfe_ccdc_set_hw_if_params(&vpfe->ccdc, &sdinfo->vpfe_param);
+ if (ret)
+ return ret;
+
+ /* set the default image parameters in the device */
+ return vpfe_config_image_format(vpfe,
+ vpfe_standards[vpfe->std_index].std_id);
+
+get_out:
+ return ret;
+}
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe,
+ "vpfe_s_input: index: %d\n", index);
+
+ return vpfe_set_input(vpfe, index);
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_querystd\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
+ return -ENODATA;
+
+ /* Call querystd function of decoder device */
+ return v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, querystd, std_id);
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_s_std\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
+ return -ENODATA;
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ ret = -EBUSY;
+ return ret;
+ }
+
+ ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id,
+ video, s_std, std_id);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Failed to set standard\n");
+ return ret;
+ }
+ ret = vpfe_config_image_format(vpfe, std_id);
+
+ return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ vpfe_dbg(2, vpfe, "vpfe_g_std\n");
+
+ sdinfo = vpfe->current_subdev;
+ if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD)
+ return -ENODATA;
+
+ *std_id = vpfe_standards[vpfe->std_index].std_id;
+
+ return 0;
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe)
+{
+ struct v4l2_rect image_win;
+
+ vpfe_dbg(2, vpfe, "vpfe_calculate_offsets\n");
+
+ vpfe_ccdc_get_image_window(&vpfe->ccdc, &image_win);
+ vpfe->field_off = image_win.height * image_win.width;
+}
+
+/*
+ * vpfe_queue_setup - Callback function for buffer setup.
+ * @vq: vb2_queue ptr
+ * @fmt: v4l2 format
+ * @nbuffers: ptr to number of buffers requested by application
+ * @nplanes:: contains number of distinct video planes needed to hold a frame
+ * @sizes[]: contains the size (in bytes) of each plane.
+ * @alloc_ctxs: ptr to allocation context
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpfe_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+
+ if (fmt && fmt->fmt.pix.sizeimage < vpfe->fmt.fmt.pix.sizeimage)
+ return -EINVAL;
+
+ if (vq->num_buffers + *nbuffers < 3)
+ *nbuffers = 3 - vq->num_buffers;
+
+ *nplanes = 1;
+ sizes[0] = fmt ? fmt->fmt.pix.sizeimage : vpfe->fmt.fmt.pix.sizeimage;
+ alloc_ctxs[0] = vpfe->alloc_ctx;
+
+ vpfe_dbg(1, vpfe,
+ "nbuffers=%d, size=%u\n", *nbuffers, sizes[0]);
+
+ /* Calculate field offset */
+ vpfe_calculate_offsets(vpfe);
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_prepare : callback function for buffer prepare
+ * @vb: ptr to vb2_buffer
+ *
+ * This is the callback function for buffer prepare when vb2_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into physical address
+ */
+static int vpfe_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+
+ vb2_set_plane_payload(vb, 0, vpfe->fmt.fmt.pix.sizeimage);
+
+ if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+ return -EINVAL;
+
+ vb->v4l2_buf.field = vpfe->fmt.fmt.pix.field;
+
+ return 0;
+}
+
+/*
+ * vpfe_buffer_queue : Callback function to add buffer to DMA queue
+ * @vb: ptr to vb2_buffer
+ */
+static void vpfe_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vb->vb2_queue);
+ struct vpfe_cap_buffer *buf = to_vpfe_buffer(vb);
+ unsigned long flags = 0;
+
+ /* add the buffer to the DMA queue */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ list_add_tail(&buf->list, &vpfe->dma_queue);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+/*
+ * vpfe_start_streaming : Starts the DMA engine for streaming
+ * @vb: ptr to vb2_buffer
+ * @count: number of buffers
+ */
+static int vpfe_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_cap_buffer *buf, *tmp;
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long flags;
+ unsigned long addr;
+ int ret;
+
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+
+ vpfe->field = 0;
+ vpfe->sequence = 0;
+
+ sdinfo = vpfe->current_subdev;
+
+ vpfe_attach_irq(vpfe);
+
+ if (vpfe->ccdc.ccdc_cfg.if_type == VPFE_RAW_BAYER)
+ vpfe_ccdc_config_raw(&vpfe->ccdc);
+ else
+ vpfe_ccdc_config_ycbcr(&vpfe->ccdc);
+
+ /* Get the next frame from the buffer queue */
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ vpfe->cur_frm = vpfe->next_frm;
+ /* Remove buffer from the buffer queue */
+ list_del(&vpfe->cur_frm->list);
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ addr = vb2_dma_contig_plane_dma_addr(&vpfe->cur_frm->vb, 0);
+
+ vpfe_set_sdr_addr(&vpfe->ccdc, (unsigned long)(addr));
+
+ vpfe_pcr_enable(&vpfe->ccdc, 1);
+
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 1);
+ if (ret < 0) {
+ vpfe_err(vpfe, "Error in attaching interrupt handle\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ list_for_each_entry_safe(buf, tmp, &vpfe->dma_queue, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+
+ return ret;
+}
+
+/*
+ * vpfe_stop_streaming : Stop the DMA engine
+ * @vq: ptr to vb2_queue
+ *
+ * This callback stops the DMA engine and any remaining buffers
+ * in the DMA queue are released.
+ */
+static void vpfe_stop_streaming(struct vb2_queue *vq)
+{
+ struct vpfe_device *vpfe = vb2_get_drv_priv(vq);
+ struct vpfe_subdev_info *sdinfo;
+ unsigned long flags;
+ int ret;
+
+ vpfe_pcr_enable(&vpfe->ccdc, 0);
+
+ vpfe_detach_irq(vpfe);
+
+ sdinfo = vpfe->current_subdev;
+ ret = v4l2_subdev_call(sdinfo->sd, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ vpfe_dbg(1, vpfe, "stream off failed in subdev\n");
+
+ /* release all active buffers */
+ spin_lock_irqsave(&vpfe->dma_queue_lock, flags);
+ if (vpfe->cur_frm == vpfe->next_frm) {
+ vb2_buffer_done(&vpfe->cur_frm->vb, VB2_BUF_STATE_ERROR);
+ } else {
+ if (vpfe->cur_frm != NULL)
+ vb2_buffer_done(&vpfe->cur_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ if (vpfe->next_frm != NULL)
+ vb2_buffer_done(&vpfe->next_frm->vb,
+ VB2_BUF_STATE_ERROR);
+ }
+
+ while (!list_empty(&vpfe->dma_queue)) {
+ vpfe->next_frm = list_entry(vpfe->dma_queue.next,
+ struct vpfe_cap_buffer, list);
+ list_del(&vpfe->next_frm->list);
+ vb2_buffer_done(&vpfe->next_frm->vb, VB2_BUF_STATE_ERROR);
+ }
+ spin_unlock_irqrestore(&vpfe->dma_queue_lock, flags);
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+ struct v4l2_cropcap *crop)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ vpfe_dbg(2, vpfe, "vpfe_cropcap\n");
+
+ if (vpfe->std_index >= ARRAY_SIZE(vpfe_standards))
+ return -EINVAL;
+
+ memset(crop, 0, sizeof(struct v4l2_cropcap));
+
+ crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ crop->defrect.width = vpfe_standards[vpfe->std_index].width;
+ crop->bounds.width = crop->defrect.width;
+ crop->defrect.height = vpfe_standards[vpfe->std_index].height;
+ crop->bounds.height = crop->defrect.height;
+ crop->pixelaspect = vpfe_standards[vpfe->std_index].pixelaspect;
+
+ return 0;
+}
+
+static int
+vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ s->r.left = s->r.top = 0;
+ s->r.width = vpfe->crop.width;
+ s->r.height = vpfe->crop.height;
+ break;
+
+ case V4L2_SEL_TGT_CROP:
+ s->r = vpfe->crop;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
+{
+ if (a->left < b->left || a->top < b->top)
+ return 0;
+
+ if (a->left + a->width > b->left + b->width)
+ return 0;
+
+ if (a->top + a->height > b->top + b->height)
+ return 0;
+
+ return 1;
+}
+
+static int
+vpfe_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ struct v4l2_rect cr = vpfe->crop;
+ struct v4l2_rect r = s->r;
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ s->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ v4l_bound_align_image(&r.width, 0, cr.width, 0,
+ &r.height, 0, cr.height, 0, 0);
+
+ r.left = clamp_t(unsigned int, r.left, 0, cr.width - r.width);
+ r.top = clamp_t(unsigned int, r.top, 0, cr.height - r.height);
+
+ if (s->flags & V4L2_SEL_FLAG_LE && !enclosed_rectangle(&r, &s->r))
+ return -ERANGE;
+
+ if (s->flags & V4L2_SEL_FLAG_GE && !enclosed_rectangle(&s->r, &r))
+ return -ERANGE;
+
+ s->r = vpfe->crop = r;
+
+ vpfe_ccdc_set_image_window(&vpfe->ccdc, &r, vpfe->bpp);
+ vpfe->fmt.fmt.pix.width = r.width;
+ vpfe->fmt.fmt.pix.height = r.height;
+ vpfe->fmt.fmt.pix.bytesperline = vpfe_ccdc_get_line_length(&vpfe->ccdc);
+ vpfe->fmt.fmt.pix.sizeimage = vpfe->fmt.fmt.pix.bytesperline *
+ vpfe->fmt.fmt.pix.height;
+
+ vpfe_dbg(1, vpfe, "cropped (%d,%d)/%dx%d of %dx%d\n",
+ r.left, r.top, r.width, r.height, cr.width, cr.height);
+
+ return 0;
+}
+
+static long vpfe_ioctl_default(struct file *file, void *priv,
+ bool valid_prio, unsigned int cmd, void *param)
+{
+ struct vpfe_device *vpfe = video_drvdata(file);
+ int ret;
+
+ vpfe_dbg(2, vpfe, "vpfe_ioctl_default\n");
+
+ if (!valid_prio) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ /* If streaming is started, return error */
+ if (vb2_is_busy(&vpfe->buffer_queue)) {
+ vpfe_err(vpfe, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ switch (cmd) {
+ case VIDIOC_AM437X_CCDC_CFG:
+ ret = vpfe_ccdc_set_params(&vpfe->ccdc, param);
+ if (ret) {
+ vpfe_dbg(2, vpfe,
+ "Error setting parameters in CCDC\n");
+ return ret;
+ }
+ ret = vpfe_get_ccdc_image_format(vpfe,
+ &vpfe->fmt);
+ if (ret < 0) {
+ vpfe_dbg(2, vpfe,
+ "Invalid image format at CCDC\n");
+ return ret;
+ }
+ break;
+
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct vb2_ops vpfe_video_qops = {
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .queue_setup = vpfe_queue_setup,
+ .buf_prepare = vpfe_buffer_prepare,
+ .buf_queue = vpfe_buffer_queue,
+ .start_streaming = vpfe_start_streaming,
+ .stop_streaming = vpfe_stop_streaming,
+};
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpfe_open,
+ .release = vpfe_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = vb2_fop_mmap,
+};
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+ .vidioc_querycap = vpfe_querycap,
+ .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt,
+ .vidioc_g_fmt_vid_cap = vpfe_g_fmt,
+ .vidioc_s_fmt_vid_cap = vpfe_s_fmt,
+ .vidioc_try_fmt_vid_cap = vpfe_try_fmt,
+
+ .vidioc_enum_framesizes = vpfe_enum_size,
+
+ .vidioc_enum_input = vpfe_enum_input,
+ .vidioc_g_input = vpfe_g_input,
+ .vidioc_s_input = vpfe_s_input,
+
+ .vidioc_querystd = vpfe_querystd,
+ .vidioc_s_std = vpfe_s_std,
+ .vidioc_g_std = vpfe_g_std,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+ .vidioc_cropcap = vpfe_cropcap,
+ .vidioc_g_selection = vpfe_g_selection,
+ .vidioc_s_selection = vpfe_s_selection,
+
+ .vidioc_default = vpfe_ioctl_default,
+};
+
+static int
+vpfe_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+ struct v4l2_subdev_mbus_code_enum mbus_code;
+ struct vpfe_subdev_info *sdinfo;
+ bool found = false;
+ int i, j;
+
+ vpfe_dbg(1, vpfe, "vpfe_async_bound\n");
+
+ for (i = 0; i < ARRAY_SIZE(vpfe->cfg->asd); i++) {
+ sdinfo = &vpfe->cfg->sub_devs[i];
+
+ if (!strcmp(sdinfo->name, subdev->name)) {
+ vpfe->sd[i] = subdev;
+ vpfe_info(vpfe,
+ "v4l2 sub device %s registered\n",
+ subdev->name);
+ vpfe->sd[i]->grp_id =
+ sdinfo->grp_id;
+ /* update tvnorms from the sub devices */
+ for (j = 0; j < 1; j++)
+ vpfe->video_dev->tvnorms |=
+ sdinfo->inputs[j].std;
+
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ vpfe_info(vpfe, "sub device (%s) not matched\n", subdev->name);
+ return -EINVAL;
+ }
+
+ /* setup the supported formats & indexes */
+ for (j = 0, i = 0; ; ++j) {
+ struct vpfe_fmt *fmt;
+ int ret;
+
+ memset(&mbus_code, 0, sizeof(mbus_code));
+ mbus_code.index = j;
+ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
+ NULL, &mbus_code);
+ if (ret)
+ break;
+
+ fmt = find_format_by_code(mbus_code.code);
+ if (!fmt)
+ continue;
+
+ fmt->supported = true;
+ fmt->index = i++;
+ }
+
+ return 0;
+}
+
+static int vpfe_probe_complete(struct vpfe_device *vpfe)
+{
+ struct video_device *vdev;
+ struct vb2_queue *q;
+ int err;
+
+ spin_lock_init(&vpfe->dma_queue_lock);
+ mutex_init(&vpfe->lock);
+
+ vpfe->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ /* set first sub device as current one */
+ vpfe->current_subdev = &vpfe->cfg->sub_devs[0];
+ vpfe->v4l2_dev.ctrl_handler = vpfe->sd[0]->ctrl_handler;
+
+ err = vpfe_set_input(vpfe, 0);
+ if (err)
+ goto probe_out;
+
+ /* Initialize videobuf2 queue as per the buffer type */
+ vpfe->alloc_ctx = vb2_dma_contig_init_ctx(vpfe->pdev);
+ if (IS_ERR(vpfe->alloc_ctx)) {
+ vpfe_err(vpfe, "Failed to get the context\n");
+ err = PTR_ERR(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ q = &vpfe->buffer_queue;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ q->drv_priv = vpfe;
+ q->ops = &vpfe_video_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->buf_struct_size = sizeof(struct vpfe_cap_buffer);
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &vpfe->lock;
+ q->min_buffers_needed = 1;
+
+ err = vb2_queue_init(q);
+ if (err) {
+ vpfe_err(vpfe, "vb2_queue_init() failed\n");
+ vb2_dma_contig_cleanup_ctx(vpfe->alloc_ctx);
+ goto probe_out;
+ }
+
+ INIT_LIST_HEAD(&vpfe->dma_queue);
+
+ vdev = vpfe->video_dev;
+ strlcpy(vdev->name, VPFE_MODULE_NAME, sizeof(vdev->name));
+ vdev->release = video_device_release;
+ vdev->fops = &vpfe_fops;
+ vdev->ioctl_ops = &vpfe_ioctl_ops;
+ vdev->v4l2_dev = &vpfe->v4l2_dev;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->queue = q;
+ vdev->lock = &vpfe->lock;
+ video_set_drvdata(vdev, vpfe);
+ err = video_register_device(vpfe->video_dev, VFL_TYPE_GRABBER, -1);
+ if (err) {
+ vpfe_err(vpfe,
+ "Unable to register video device.\n");
+ goto probe_out;
+ }
+
+ return 0;
+
+probe_out:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ return err;
+}
+
+static int vpfe_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct vpfe_device *vpfe = container_of(notifier->v4l2_dev,
+ struct vpfe_device, v4l2_dev);
+
+ return vpfe_probe_complete(vpfe);
+}
+
+static struct vpfe_config *
+vpfe_get_pdata(struct platform_device *pdev)
+{
+ struct device_node *endpoint = NULL, *rem = NULL;
+ struct v4l2_of_endpoint bus_cfg;
+ struct vpfe_subdev_info *sdinfo;
+ struct vpfe_config *pdata;
+ unsigned int flags;
+ unsigned int i;
+ int err;
+
+ dev_dbg(&pdev->dev, "vpfe_get_pdata\n");
+
+ if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
+ return pdev->dev.platform_data;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; ; i++) {
+ endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
+ endpoint);
+ if (!endpoint)
+ break;
+
+ sdinfo = &pdata->sub_devs[i];
+ sdinfo->grp_id = 0;
+
+ /* we only support camera */
+ sdinfo->inputs[0].index = i;
+ strcpy(sdinfo->inputs[0].name, "Camera");
+ sdinfo->inputs[0].type = V4L2_INPUT_TYPE_CAMERA;
+ sdinfo->inputs[0].std = V4L2_STD_ALL;
+ sdinfo->inputs[0].capabilities = V4L2_IN_CAP_STD;
+
+ sdinfo->can_route = 0;
+ sdinfo->routes = NULL;
+
+ of_property_read_u32(endpoint, "ti,am437x-vpfe-interface",
+ &sdinfo->vpfe_param.if_type);
+ if (sdinfo->vpfe_param.if_type < 0 ||
+ sdinfo->vpfe_param.if_type > 4) {
+ sdinfo->vpfe_param.if_type = VPFE_RAW_BAYER;
+ }
+
+ err = v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ if (err) {
+ dev_err(&pdev->dev, "Could not parse the endpoint\n");
+ goto done;
+ }
+
+ sdinfo->vpfe_param.bus_width = bus_cfg.bus.parallel.bus_width;
+
+ if (sdinfo->vpfe_param.bus_width < 8 ||
+ sdinfo->vpfe_param.bus_width > 16) {
+ dev_err(&pdev->dev, "Invalid bus width.\n");
+ goto done;
+ }
+
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.hdpol = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ sdinfo->vpfe_param.vdpol = 1;
+
+ rem = of_graph_get_remote_port_parent(endpoint);
+ if (!rem) {
+ dev_err(&pdev->dev, "Remote device at %s not found\n",
+ endpoint->full_name);
+ goto done;
+ }
+
+ strncpy(sdinfo->name, rem->name, sizeof(sdinfo->name));
+
+ pdata->asd[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct v4l2_async_subdev),
+ GFP_KERNEL);
+ pdata->asd[i]->match_type = V4L2_ASYNC_MATCH_OF;
+ pdata->asd[i]->match.of.node = rem;
+ of_node_put(endpoint);
+ of_node_put(rem);
+ }
+
+ of_node_put(endpoint);
+ return pdata;
+
+done:
+ of_node_put(endpoint);
+ of_node_put(rem);
+ return NULL;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static int vpfe_probe(struct platform_device *pdev)
+{
+ struct vpfe_config *vpfe_cfg = vpfe_get_pdata(pdev);
+ struct vpfe_device *vpfe;
+ struct vpfe_ccdc *ccdc;
+ struct resource *res;
+ int ret;
+
+ if (!vpfe_cfg) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ vpfe = devm_kzalloc(&pdev->dev, sizeof(*vpfe), GFP_KERNEL);
+ if (!vpfe)
+ return -ENOMEM;
+
+ vpfe->pdev = &pdev->dev;
+ vpfe->cfg = vpfe_cfg;
+ ccdc = &vpfe->ccdc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ccdc->ccdc_cfg.base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ccdc->ccdc_cfg.base_addr))
+ return PTR_ERR(ccdc->ccdc_cfg.base_addr);
+
+ vpfe->irq = platform_get_irq(pdev, 0);
+ if (vpfe->irq <= 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(vpfe->pdev, vpfe->irq, vpfe_isr, 0,
+ "vpfe_capture0", vpfe);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to request interrupt\n");
+ return -EINVAL;
+ }
+
+ vpfe->video_dev = video_device_alloc();
+ if (!vpfe->video_dev) {
+ dev_err(&pdev->dev, "Unable to allocate video device\n");
+ return -ENOMEM;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &vpfe->v4l2_dev);
+ if (ret) {
+ vpfe_err(vpfe,
+ "Unable to register v4l2 device.\n");
+ goto probe_out_video_release;
+ }
+
+ /* set the driver data in platform device */
+ platform_set_drvdata(pdev, vpfe);
+ /* Enabling module functional clock */
+ pm_runtime_enable(&pdev->dev);
+
+ /* for now just enable it here instead of waiting for the open */
+ pm_runtime_get_sync(&pdev->dev);
+
+ vpfe_ccdc_config_defaults(ccdc);
+
+ pm_runtime_put_sync(&pdev->dev);
+
+ vpfe->sd = devm_kzalloc(&pdev->dev, sizeof(struct v4l2_subdev *) *
+ ARRAY_SIZE(vpfe->cfg->asd), GFP_KERNEL);
+ if (!vpfe->sd) {
+ ret = -ENOMEM;
+ goto probe_out_v4l2_unregister;
+ }
+
+ vpfe->notifier.subdevs = vpfe->cfg->asd;
+ vpfe->notifier.num_subdevs = ARRAY_SIZE(vpfe->cfg->asd);
+ vpfe->notifier.bound = vpfe_async_bound;
+ vpfe->notifier.complete = vpfe_async_complete;
+ ret = v4l2_async_notifier_register(&vpfe->v4l2_dev,
+ &vpfe->notifier);
+ if (ret) {
+ vpfe_err(vpfe, "Error registering async notifier\n");
+ ret = -EINVAL;
+ goto probe_out_v4l2_unregister;
+ }
+
+ return 0;
+
+probe_out_v4l2_unregister:
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+probe_out_video_release:
+ if (!video_is_registered(vpfe->video_dev))
+ video_device_release(vpfe->video_dev);
+ return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+
+ vpfe_dbg(2, vpfe, "vpfe_remove\n");
+
+ pm_runtime_disable(&pdev->dev);
+
+ v4l2_async_notifier_unregister(&vpfe->notifier);
+ v4l2_device_unregister(&vpfe->v4l2_dev);
+ video_unregister_device(vpfe->video_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static void vpfe_save_context(struct vpfe_ccdc *ccdc)
+{
+ ccdc->ccdc_ctx[VPFE_PCR >> 2] = vpfe_reg_read(ccdc, VPFE_PCR);
+ ccdc->ccdc_ctx[VPFE_SYNMODE >> 2] = vpfe_reg_read(ccdc, VPFE_SYNMODE);
+ ccdc->ccdc_ctx[VPFE_SDOFST >> 2] = vpfe_reg_read(ccdc, VPFE_SDOFST);
+ ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2] = vpfe_reg_read(ccdc, VPFE_SDR_ADDR);
+ ccdc->ccdc_ctx[VPFE_CLAMP >> 2] = vpfe_reg_read(ccdc, VPFE_CLAMP);
+ ccdc->ccdc_ctx[VPFE_DCSUB >> 2] = vpfe_reg_read(ccdc, VPFE_DCSUB);
+ ccdc->ccdc_ctx[VPFE_COLPTN >> 2] = vpfe_reg_read(ccdc, VPFE_COLPTN);
+ ccdc->ccdc_ctx[VPFE_BLKCMP >> 2] = vpfe_reg_read(ccdc, VPFE_BLKCMP);
+ ccdc->ccdc_ctx[VPFE_VDINT >> 2] = vpfe_reg_read(ccdc, VPFE_VDINT);
+ ccdc->ccdc_ctx[VPFE_ALAW >> 2] = vpfe_reg_read(ccdc, VPFE_ALAW);
+ ccdc->ccdc_ctx[VPFE_REC656IF >> 2] = vpfe_reg_read(ccdc, VPFE_REC656IF);
+ ccdc->ccdc_ctx[VPFE_CCDCFG >> 2] = vpfe_reg_read(ccdc, VPFE_CCDCFG);
+ ccdc->ccdc_ctx[VPFE_CULLING >> 2] = vpfe_reg_read(ccdc, VPFE_CULLING);
+ ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HD_VD_WID);
+ ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_PIX_LINES);
+ ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HORZ_INFO);
+ ccdc->ccdc_ctx[VPFE_VERT_START >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_START);
+ ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2] = vpfe_reg_read(ccdc,
+ VPFE_VERT_LINES);
+ ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2] = vpfe_reg_read(ccdc,
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we don't care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Save VPFE context */
+ vpfe_save_context(ccdc);
+
+ /* Disable CCDC */
+ vpfe_pcr_enable(ccdc, 0);
+ vpfe_config_enable(ccdc, 0);
+
+ /* Disable both master and slave clock */
+ pm_runtime_put_sync(dev);
+
+ /* Select sleep pin state */
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static void vpfe_restore_context(struct vpfe_ccdc *ccdc)
+{
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SYNMODE >> 2], VPFE_SYNMODE);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CULLING >> 2], VPFE_CULLING);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDOFST >> 2], VPFE_SDOFST);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_SDR_ADDR >> 2], VPFE_SDR_ADDR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CLAMP >> 2], VPFE_CLAMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_DCSUB >> 2], VPFE_DCSUB);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_COLPTN >> 2], VPFE_COLPTN);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_BLKCMP >> 2], VPFE_BLKCMP);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VDINT >> 2], VPFE_VDINT);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_ALAW >> 2], VPFE_ALAW);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_REC656IF >> 2], VPFE_REC656IF);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_CCDCFG >> 2], VPFE_CCDCFG);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PCR >> 2], VPFE_PCR);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HD_VD_WID >> 2],
+ VPFE_HD_VD_WID);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_PIX_LINES >> 2],
+ VPFE_PIX_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HORZ_INFO >> 2],
+ VPFE_HORZ_INFO);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_START >> 2],
+ VPFE_VERT_START);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_VERT_LINES >> 2],
+ VPFE_VERT_LINES);
+ vpfe_reg_write(ccdc, ccdc->ccdc_ctx[VPFE_HSIZE_OFF >> 2],
+ VPFE_HSIZE_OFF);
+}
+
+static int vpfe_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vpfe_device *vpfe = platform_get_drvdata(pdev);
+ struct vpfe_ccdc *ccdc = &vpfe->ccdc;
+
+ /* if streaming has not started we don't care */
+ if (!vb2_start_streaming_called(&vpfe->buffer_queue))
+ return 0;
+
+ /* Enable both master and slave clock */
+ pm_runtime_get_sync(dev);
+ vpfe_config_enable(ccdc, 1);
+
+ /* Restore VPFE context */
+ vpfe_restore_context(ccdc);
+
+ vpfe_config_enable(ccdc, 0);
+ pm_runtime_put_sync(dev);
+
+ /* Select default pin state */
+ pinctrl_pm_select_default_state(dev);
+
+ return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(vpfe_pm_ops, vpfe_suspend, vpfe_resume);
+
+static const struct of_device_id vpfe_of_match[] = {
+ { .compatible = "ti,am437x-vpfe", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, vpfe_of_match);
+
+static struct platform_driver vpfe_driver = {
+ .probe = vpfe_probe,
+ .remove = vpfe_remove,
+ .driver = {
+ .name = VPFE_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &vpfe_pm_ops,
+ .of_match_table = of_match_ptr(vpfe_of_match),
+ },
+};
+
+module_platform_driver(vpfe_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TI AM437x VPFE driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VPFE_VERSION);
diff --git a/drivers/media/platform/am437x/am437x-vpfe.h b/drivers/media/platform/am437x/am437x-vpfe.h
new file mode 100644
index 0000000..0f55735
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <[email protected]>
+ * Lad, Prabhakar <[email protected]>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_H
+#define AM437X_VPFE_H
+
+#include <linux/am437x-vpfe.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "am437x-vpfe_regs.h"
+
+enum vpfe_pin_pol {
+ VPFE_PINPOL_POSITIVE = 0,
+ VPFE_PINPOL_NEGATIVE,
+};
+
+enum vpfe_hw_if_type {
+ /* Raw Bayer */
+ VPFE_RAW_BAYER = 0,
+ /* BT656 - 8 bit */
+ VPFE_BT656,
+ /* BT656 - 10 bit */
+ VPFE_BT656_10BIT,
+ /* YCbCr - 8 bit with external sync */
+ VPFE_YCBCR_SYNC_8,
+ /* YCbCr - 16 bit with external sync */
+ VPFE_YCBCR_SYNC_16,
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+ enum vpfe_hw_if_type if_type;
+ enum vpfe_pin_pol hdpol;
+ enum vpfe_pin_pol vdpol;
+ unsigned int bus_width;
+};
+
+#define VPFE_MAX_SUBDEV 1
+#define VPFE_MAX_INPUTS 1
+
+struct vpfe_pixel_format {
+ struct v4l2_fmtdesc fmtdesc;
+ /* bytes per pixel */
+ int bpp;
+};
+
+struct vpfe_std_info {
+ int active_pixels;
+ int active_lines;
+ /* current frame format */
+ int frame_format;
+};
+
+struct vpfe_route {
+ u32 input;
+ u32 output;
+};
+
+struct vpfe_subdev_info {
+ char name[32];
+ /* Sub device group id */
+ int grp_id;
+ /* inputs available at the sub device */
+ struct v4l2_input inputs[VPFE_MAX_INPUTS];
+ /* Sub dev routing information for each input */
+ struct vpfe_route *routes;
+ /* check if sub dev supports routing */
+ int can_route;
+ /* ccdc bus/interface configuration */
+ struct vpfe_hw_if_param vpfe_param;
+ struct v4l2_subdev *sd;
+};
+
+struct vpfe_config {
+ /* information about each subdev */
+ struct vpfe_subdev_info sub_devs[VPFE_MAX_SUBDEV];
+ /* Flat array, arranged in groups */
+ struct v4l2_async_subdev *asd[VPFE_MAX_SUBDEV];
+};
+
+struct vpfe_cap_buffer {
+ struct vb2_buffer vb;
+ struct list_head list;
+};
+
+enum ccdc_pixfmt {
+ CCDC_PIXFMT_RAW = 0,
+ CCDC_PIXFMT_YCBCR_16BIT,
+ CCDC_PIXFMT_YCBCR_8BIT,
+};
+
+enum ccdc_frmfmt {
+ CCDC_FRMFMT_PROGRESSIVE = 0,
+ CCDC_FRMFMT_INTERLACED,
+};
+
+/* PIXEL ORDER IN MEMORY from LSB to MSB */
+/* only applicable for 8-bit input mode */
+enum ccdc_pixorder {
+ CCDC_PIXORDER_YCBYCR,
+ CCDC_PIXORDER_CBYCRY,
+};
+
+enum ccdc_buftype {
+ CCDC_BUFTYPE_FLD_INTERLEAVED,
+ CCDC_BUFTYPE_FLD_SEPARATED
+};
+
+
+/* returns the highest bit used for the gamma */
+static inline u8 ccdc_gamma_width_max_bit(enum vpfe_ccdc_gamma_width width)
+{
+ return 15 - width;
+}
+
+/* returns the highest bit used for this data size */
+static inline u8 ccdc_data_size_max_bit(enum vpfe_ccdc_data_size sz)
+{
+ return sz == VPFE_CCDC_DATA_8BITS ? 7 : 15 - sz;
+}
+
+/* Structure for CCDC configuration parameters for raw capture mode */
+struct ccdc_params_raw {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+ /*
+ * enable to store the image in inverse
+ * order in memory(bottom to top)
+ */
+ unsigned char image_invert_enable;
+ /* configurable parameters */
+ struct vpfe_ccdc_config_params_raw config_params;
+};
+
+struct ccdc_params_ycbcr {
+ /* pixel format */
+ enum ccdc_pixfmt pix_fmt;
+ /* progressive or interlaced frame */
+ enum ccdc_frmfmt frm_fmt;
+ struct v4l2_rect win;
+ /* Current Format Bytes Per Pixels */
+ unsigned int bytesperpixel;
+ /* Current Format Bytes per Lines
+ * (Aligned to 32 bytes) used for HORZ_INFO
+ */
+ unsigned int bytesperline;
+ /* field id polarity */
+ enum vpfe_pin_pol fid_pol;
+ /* vertical sync polarity */
+ enum vpfe_pin_pol vd_pol;
+ /* horizontal sync polarity */
+ enum vpfe_pin_pol hd_pol;
+ /* enable BT.656 embedded sync mode */
+ int bt656_enable;
+ /* cb:y:cr:y or y:cb:y:cr in memory */
+ enum ccdc_pixorder pix_order;
+ /* interleaved or separated fields */
+ enum ccdc_buftype buf_type;
+};
+
+/*
+ * CCDC operational configuration
+ */
+struct ccdc_config {
+ /* CCDC interface type */
+ enum vpfe_hw_if_type if_type;
+ /* Raw Bayer configuration */
+ struct ccdc_params_raw bayer;
+ /* YCbCr configuration */
+ struct ccdc_params_ycbcr ycbcr;
+ /* ccdc base address */
+ void __iomem *base_addr;
+};
+
+struct vpfe_ccdc {
+ struct ccdc_config ccdc_cfg;
+ u32 ccdc_ctx[VPFE_REG_END / sizeof(u32)];
+};
+
+struct vpfe_device {
+ /* V4l2 specific parameters */
+ /* Identifies video device for this channel */
+ struct video_device *video_dev;
+ /* sub devices */
+ struct v4l2_subdev **sd;
+ /* vpfe cfg */
+ struct vpfe_config *cfg;
+ /* V4l2 device */
+ struct v4l2_device v4l2_dev;
+ /* parent device */
+ struct device *pdev;
+ /* subdevice async Notifier */
+ struct v4l2_async_notifier notifier;
+ /* Indicates id of the field which is being displayed */
+ unsigned field;
+ unsigned sequence;
+ /* current interface type */
+ struct vpfe_hw_if_param vpfe_if_params;
+ /* ptr to currently selected sub device */
+ struct vpfe_subdev_info *current_subdev;
+ /* current input at the sub device */
+ int current_input;
+ /* Keeps track of the information about the standard */
+ struct vpfe_std_info std_info;
+ /* std index into std table */
+ int std_index;
+ /* IRQs used when CCDC output to SDRAM */
+ unsigned int irq;
+ /* Pointer pointing to current v4l2_buffer */
+ struct vpfe_cap_buffer *cur_frm;
+ /* Pointer pointing to next v4l2_buffer */
+ struct vpfe_cap_buffer *next_frm;
+ /* Used to store pixel format */
+ struct v4l2_format fmt;
+ /* Used to store current bytes per pixel based on current format */
+ unsigned int bpp;
+ /*
+ * used when IMP is chained to store the crop window which
+ * is different from the image window
+ */
+ struct v4l2_rect crop;
+ /* Buffer queue used in video-buf */
+ struct vb2_queue buffer_queue;
+ /* Allocator-specific contexts for each plane */
+ struct vb2_alloc_ctx *alloc_ctx;
+ /* Queue of filled frames */
+ struct list_head dma_queue;
+ /* IRQ lock for DMA queue */
+ spinlock_t dma_queue_lock;
+ /* lock used to access this structure */
+ struct mutex lock;
+ /*
+ * offset where second field starts from the starting of the
+ * buffer for field separated YCbCr formats
+ */
+ u32 field_off;
+ struct vpfe_ccdc ccdc;
+};
+
+#endif /* AM437X_VPFE_H */
diff --git a/drivers/media/platform/am437x/am437x-vpfe_regs.h b/drivers/media/platform/am437x/am437x-vpfe_regs.h
new file mode 100644
index 0000000..4a0ed29
--- /dev/null
+++ b/drivers/media/platform/am437x/am437x-vpfe_regs.h
@@ -0,0 +1,140 @@
+/*
+ * TI AM437x Image Sensor Interface Registers
+ *
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <[email protected]>
+ * Lad, Prabhakar <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AM437X_VPFE_REGS_H
+#define AM437X_VPFE_REGS_H
+
+/* VPFE module register offset */
+#define VPFE_REVISION 0x0
+#define VPFE_PCR 0x4
+#define VPFE_SYNMODE 0x8
+#define VPFE_HD_VD_WID 0xc
+#define VPFE_PIX_LINES 0x10
+#define VPFE_HORZ_INFO 0x14
+#define VPFE_VERT_START 0x18
+#define VPFE_VERT_LINES 0x1c
+#define VPFE_CULLING 0x20
+#define VPFE_HSIZE_OFF 0x24
+#define VPFE_SDOFST 0x28
+#define VPFE_SDR_ADDR 0x2c
+#define VPFE_CLAMP 0x30
+#define VPFE_DCSUB 0x34
+#define VPFE_COLPTN 0x38
+#define VPFE_BLKCMP 0x3c
+#define VPFE_VDINT 0x48
+#define VPFE_ALAW 0x4c
+#define VPFE_REC656IF 0x50
+#define VPFE_CCDCFG 0x54
+#define VPFE_DMA_CNTL 0x98
+#define VPFE_SYSCONFIG 0x104
+#define VPFE_CONFIG 0x108
+#define VPFE_IRQ_EOI 0x110
+#define VPFE_IRQ_STS_RAW 0x114
+#define VPFE_IRQ_STS 0x118
+#define VPFE_IRQ_EN_SET 0x11c
+#define VPFE_IRQ_EN_CLR 0x120
+#define VPFE_REG_END 0x124
+
+/* Define bit fields within selected registers */
+#define VPFE_FID_POL_MASK 1
+#define VPFE_FID_POL_SHIFT 4
+#define VPFE_HD_POL_MASK 1
+#define VPFE_HD_POL_SHIFT 3
+#define VPFE_VD_POL_MASK 1
+#define VPFE_VD_POL_SHIFT 2
+#define VPFE_HSIZE_OFF_MASK 0xffffffe0
+#define VPFE_32BYTE_ALIGN_VAL 31
+#define VPFE_FRM_FMT_MASK 0x1
+#define VPFE_FRM_FMT_SHIFT 7
+#define VPFE_DATA_SZ_MASK 7
+#define VPFE_DATA_SZ_SHIFT 8
+#define VPFE_PIX_FMT_MASK 3
+#define VPFE_PIX_FMT_SHIFT 12
+#define VPFE_VP2SDR_DISABLE 0xfffbffff
+#define VPFE_WEN_ENABLE (1 << 17)
+#define VPFE_SDR2RSZ_DISABLE 0xfff7ffff
+#define VPFE_VDHDEN_ENABLE (1 << 16)
+#define VPFE_LPF_ENABLE (1 << 14)
+#define VPFE_ALAW_ENABLE (1 << 3)
+#define VPFE_ALAW_GAMMA_WD_MASK 7
+#define VPFE_BLK_CLAMP_ENABLE (1 << 31)
+#define VPFE_BLK_SGAIN_MASK 0x1f
+#define VPFE_BLK_ST_PXL_MASK 0x7fff
+#define VPFE_BLK_ST_PXL_SHIFT 10
+#define VPFE_BLK_SAMPLE_LN_MASK 7
+#define VPFE_BLK_SAMPLE_LN_SHIFT 28
+#define VPFE_BLK_SAMPLE_LINE_MASK 7
+#define VPFE_BLK_SAMPLE_LINE_SHIFT 25
+#define VPFE_BLK_DC_SUB_MASK 0x03fff
+#define VPFE_BLK_COMP_MASK 0xff
+#define VPFE_BLK_COMP_GB_COMP_SHIFT 8
+#define VPFE_BLK_COMP_GR_COMP_SHIFT 16
+#define VPFE_BLK_COMP_R_COMP_SHIFT 24
+#define VPFE_LATCH_ON_VSYNC_DISABLE (1 << 15)
+#define VPFE_DATA_PACK_ENABLE (1 << 11)
+#define VPFE_HORZ_INFO_SPH_SHIFT 16
+#define VPFE_VERT_START_SLV0_SHIFT 16
+#define VPFE_VDINT_VDINT0_SHIFT 16
+#define VPFE_VDINT_VDINT1_MASK 0xffff
+#define VPFE_PPC_RAW 1
+#define VPFE_DCSUB_DEFAULT_VAL 0
+#define VPFE_CLAMP_DEFAULT_VAL 0
+#define VPFE_COLPTN_VAL 0xbb11bb11
+#define VPFE_TWO_BYTES_PER_PIXEL 2
+#define VPFE_INTERLACED_IMAGE_INVERT 0x4b6d
+#define VPFE_INTERLACED_NO_IMAGE_INVERT 0x0249
+#define VPFE_PROGRESSIVE_IMAGE_INVERT 0x4000
+#define VPFE_PROGRESSIVE_NO_IMAGE_INVERT 0
+#define VPFE_INTERLACED_HEIGHT_SHIFT 1
+#define VPFE_SYN_MODE_INPMOD_SHIFT 12
+#define VPFE_SYN_MODE_INPMOD_MASK 3
+#define VPFE_SYN_MODE_8BITS (7 << 8)
+#define VPFE_SYN_MODE_10BITS (6 << 8)
+#define VPFE_SYN_MODE_11BITS (5 << 8)
+#define VPFE_SYN_MODE_12BITS (4 << 8)
+#define VPFE_SYN_MODE_13BITS (3 << 8)
+#define VPFE_SYN_MODE_14BITS (2 << 8)
+#define VPFE_SYN_MODE_15BITS (1 << 8)
+#define VPFE_SYN_MODE_16BITS (0 << 8)
+#define VPFE_SYN_FLDMODE_MASK 1
+#define VPFE_SYN_FLDMODE_SHIFT 7
+#define VPFE_REC656IF_BT656_EN 3
+#define VPFE_SYN_MODE_VD_POL_NEGATIVE (1 << 2)
+#define VPFE_CCDCFG_Y8POS_SHIFT 11
+#define VPFE_CCDCFG_BW656_10BIT (1 << 5)
+#define VPFE_SDOFST_FIELD_INTERLEAVED 0x249
+#define VPFE_NO_CULLING 0xffff00ff
+#define VPFE_VDINT0 (1 << 0)
+#define VPFE_VDINT1 (1 << 1)
+#define VPFE_VDINT2 (1 << 2)
+#define VPFE_DMA_CNTL_OVERFLOW (1 << 31)
+
+#define VPFE_CONFIG_PCLK_INV_SHIFT 0
+#define VPFE_CONFIG_PCLK_INV_MASK 1
+#define VPFE_CONFIG_PCLK_INV_NOT_INV 0
+#define VPFE_CONFIG_PCLK_INV_INV 1
+#define VPFE_CONFIG_EN_SHIFT 1
+#define VPFE_CONFIG_EN_MASK 2
+#define VPFE_CONFIG_EN_DISABLE 0
+#define VPFE_CONFIG_EN_ENABLE 1
+#define VPFE_CONFIG_ST_SHIFT 2
+#define VPFE_CONFIG_ST_MASK 4
+#define VPFE_CONFIG_ST_OCP_ACTIVE 0
+#define VPFE_CONFIG_ST_OCP_STANDBY 1
+
+#endif /* AM437X_VPFE_REGS_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index ed39ac8..65495f0 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -34,6 +34,7 @@ header-y += adfs_fs.h
header-y += affs_hardblocks.h
header-y += agpgart.h
header-y += aio_abi.h
+header-y += am437x-vpfe.h
header-y += apm_bios.h
header-y += arcfb.h
header-y += atalk.h
diff --git a/include/uapi/linux/am437x-vpfe.h b/include/uapi/linux/am437x-vpfe.h
new file mode 100644
index 0000000..9b03033f
--- /dev/null
+++ b/include/uapi/linux/am437x-vpfe.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2013 - 2014 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <[email protected]>
+ * Lad, Prabhakar <[email protected]>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef AM437X_VPFE_USER_H
+#define AM437X_VPFE_USER_H
+
+enum vpfe_ccdc_data_size {
+ VPFE_CCDC_DATA_16BITS = 0,
+ VPFE_CCDC_DATA_15BITS,
+ VPFE_CCDC_DATA_14BITS,
+ VPFE_CCDC_DATA_13BITS,
+ VPFE_CCDC_DATA_12BITS,
+ VPFE_CCDC_DATA_11BITS,
+ VPFE_CCDC_DATA_10BITS,
+ VPFE_CCDC_DATA_8BITS,
+};
+
+/* enum for No of pixel per line to be avg. in Black Clamping*/
+enum vpfe_ccdc_sample_length {
+ VPFE_CCDC_SAMPLE_1PIXELS = 0,
+ VPFE_CCDC_SAMPLE_2PIXELS,
+ VPFE_CCDC_SAMPLE_4PIXELS,
+ VPFE_CCDC_SAMPLE_8PIXELS,
+ VPFE_CCDC_SAMPLE_16PIXELS,
+};
+
+/* enum for No of lines in Black Clamping */
+enum vpfe_ccdc_sample_line {
+ VPFE_CCDC_SAMPLE_1LINES = 0,
+ VPFE_CCDC_SAMPLE_2LINES,
+ VPFE_CCDC_SAMPLE_4LINES,
+ VPFE_CCDC_SAMPLE_8LINES,
+ VPFE_CCDC_SAMPLE_16LINES,
+};
+
+/* enum for Alaw gamma width */
+enum vpfe_ccdc_gamma_width {
+ VPFE_CCDC_GAMMA_BITS_15_6 = 0, /* use bits 15-6 for gamma */
+ VPFE_CCDC_GAMMA_BITS_14_5,
+ VPFE_CCDC_GAMMA_BITS_13_4,
+ VPFE_CCDC_GAMMA_BITS_12_3,
+ VPFE_CCDC_GAMMA_BITS_11_2,
+ VPFE_CCDC_GAMMA_BITS_10_1,
+ VPFE_CCDC_GAMMA_BITS_09_0, /* use bits 9-0 for gamma */
+};
+
+/* structure for ALaw */
+struct vpfe_ccdc_a_law {
+ /* Enable/disable A-Law */
+ unsigned char enable;
+ /* Gamma Width Input */
+ enum vpfe_ccdc_gamma_width gamma_wd;
+};
+
+/* structure for Black Clamping */
+struct vpfe_ccdc_black_clamp {
+ unsigned char enable;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_length sample_pixel;
+ /* only if bClampEnable is TRUE */
+ enum vpfe_ccdc_sample_line sample_ln;
+ /* only if bClampEnable is TRUE */
+ unsigned short start_pixel;
+ /* only if bClampEnable is TRUE */
+ unsigned short sgain;
+ /* only if bClampEnable is FALSE */
+ unsigned short dc_sub;
+};
+
+/* structure for Black Level Compensation */
+struct vpfe_ccdc_black_compensation {
+ /* Constant value to subtract from Red component */
+ char r;
+ /* Constant value to subtract from Gr component */
+ char gr;
+ /* Constant value to subtract from Blue component */
+ char b;
+ /* Constant value to subtract from Gb component */
+ char gb;
+};
+
+/* Structure for CCDC configuration parameters for raw capture mode passed
+ * by application
+ */
+struct vpfe_ccdc_config_params_raw {
+ /* data size value from 8 to 16 bits */
+ enum vpfe_ccdc_data_size data_sz;
+ /* Structure for Optional A-Law */
+ struct vpfe_ccdc_a_law alaw;
+ /* Structure for Optical Black Clamp */
+ struct vpfe_ccdc_black_clamp blk_clamp;
+ /* Structure for Black Compensation */
+ struct vpfe_ccdc_black_compensation blk_comp;
+};
+
+/*
+ * Private IOCTL
+ * VIDIOC_AM437X_CCDC_CFG - Set CCDC configuration for raw capture
+ * This is an experimental ioctl that will change in future kernels. So use
+ * this ioctl with care !
+ **/
+#define VIDIOC_AM437X_CCDC_CFG \
+ _IOW('V', BASE_VIDIOC_PRIVATE + 1, void *)
+
+#endif /* AM437X_VPFE_USER_H */
--
1.9.1

2014-12-05 12:55:11

by Lad, Prabhakar

Subject: Re: [PATCH v3] media: platform: add VPFE capture driver support for AM437X

Hi Hans,

On Fri, Dec 5, 2014 at 12:24 PM, Hans Verkuil <[email protected]> wrote:
> Hi Prabhakar,
>
> Sorry, there are still a few items that need to be fixed.
> If you can make a v4 with these issues addressed, then I can still make a
> pull request, although it depends on Mauro whether it is still accepted for
> 3.19.
>
OK will post a v4 tonight fixing all the below issues.

FYI: Looking at the response of Mauro on 'soc-camera: 1st set for 3.19'
he wont accept it!

Thanks,
--Prabhakar Lad

> On 12/04/2014 12:12 AM, Lad, Prabhakar wrote:
>> From: Benoit Parrot <[email protected]>
>>
>> This patch adds Video Processing Front End (VPFE) driver for
>> AM437X family of devices
>> Driver supports the following:
>> - V4L2 API using MMAP buffer access based on videobuf2 api
>> - Asynchronous sensor/decoder sub device registration
>> - DT support
>
> Just to confirm: this driver only supports SDTV formats? No HDTV?
> I didn't see any VIDIOC_*_DV_TIMINGS support, so I assume it really
> isn't supported.
>
>>
>> Signed-off-by: Benoit Parrot <[email protected]>
>> Signed-off-by: Darren Etheridge <[email protected]>
>> Signed-off-by: Lad, Prabhakar <[email protected]>
>> ---
>
> <snip>
>
>> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
>> new file mode 100644
>> index 0000000..25863e8
>> --- /dev/null
>> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
>
> <snip>
>
>> +
>> +static int
>> +cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
>> +{
>> + return lhs->type == rhs->type &&
>> + lhs->fmt.pix.width == rhs->fmt.pix.width &&
>> + lhs->fmt.pix.height == rhs->fmt.pix.height &&
>> + lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
>> + lhs->fmt.pix.field == rhs->fmt.pix.field &&
>> + lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace;
>
> Add a check for pix.ycbcr_enc and pix.quantization.
>
OK

> <snip>
>
>> +/*
>> + * vpfe_release : This function is based on the vb2_fop_release
>> + * helper function.
>> + * It has been augmented to handle module power management,
>> + * by disabling/enabling h/w module fcntl clock when necessary.
>> + */
>> +static int vpfe_release(struct file *file)
>> +{
>> + struct vpfe_device *vpfe = video_drvdata(file);
>> + int ret;
>> +
>> + vpfe_dbg(2, vpfe, "vpfe_release\n");
>> +
>> + ret = _vb2_fop_release(file, NULL);
>
> This isn't going to work. _vb2_fop_release calls v4l2_fh_release(), so
> the v4l2_fh_is_singular_file(file) will be wrong and you release the fh
> once too many.
>
> I would do this:
>
> if (!v4l2_fh_is_singular_file(file))
> return vb2_fop_release(file);
> mutex_lock(&vpfe->lock);
> ret = _vb2_fop_release(file, NULL);
> vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
> mutex_unlock(&vpfe->lock);
> return ret;
>
>> +
>> + if (v4l2_fh_is_singular_file(file)) {
>> + mutex_lock(&vpfe->lock);
>> + vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
>> + v4l2_fh_release(file);
>> + mutex_unlock(&vpfe->lock);
>> + }
>> +
>> + return ret;
>> +}
>
> <snip>
>
>> +static int vpfe_enum_size(struct file *file, void *priv,
>> + struct v4l2_frmsizeenum *fsize)
>> +{
>> + struct vpfe_device *vpfe = video_drvdata(file);
>> + struct v4l2_subdev_frame_size_enum fse;
>> + struct vpfe_subdev_info *sdinfo;
>> + struct v4l2_mbus_framefmt mbus;
>> + struct v4l2_pix_format pix;
>> + struct vpfe_fmt *fmt;
>> + int ret;
>> +
>> + vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
>> +
>> + /* check for valid format */
>> + fmt = find_format_by_pix(fsize->pixel_format);
>> + if (!fmt) {
>> + vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
>> + fsize->pixel_format);
>> + return -EINVAL;
>> + }
>> +
>> + memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
>> +
>> + sdinfo = vpfe->current_subdev;
>> + if (!sdinfo->sd)
>> + return -EINVAL;
>> +
>> + memset(&pix, 0x0, sizeof(pix));
>> + /* Construct pix from parameter and use default for the rest */
>> + pix.pixelformat = fsize->pixel_format;
>> + pix.width = 640;
>> + pix.height = 480;
>> + pix.colorspace = V4L2_COLORSPACE_SRGB;
>> + pix.field = V4L2_FIELD_NONE;
>> + pix_to_mbus(vpfe, &pix, &mbus);
>> +
>> + memset(&fse, 0x0, sizeof(fse));
>> + fse.index = fsize->index;
>> + fse.pad = 0;
>> + fse.code = mbus.code;
>> + ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);
>
> FYI: strictly speaking this is wrong since this op theoretically expects a
> v4l2_subdev_fh pointer instead of a NULL argument. However, you do not have
> an alternative right now. As you know, I've been working on fixing this, so
> if that gets accepted, then you need to update this code as well in a later
> patch.
>
>> + if (ret)
>> + return -EINVAL;
>> +
>> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
>> + fse.index, fse.code, fse.min_width, fse.max_width,
>> + fse.min_height, fse.max_height);
>> +
>> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>> + fsize->discrete.width = fse.max_width;
>> + fsize->discrete.height = fse.max_height;
>> +
>> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
>> + fsize->index, print_fourcc(fsize->pixel_format),
>> + fsize->discrete.width, fsize->discrete.height);
>> +
>> + return 0;
>> +}
>> +
>
> <snip>
>
>> +static int
>> +vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
>> +{
>> + struct vpfe_device *vpfe = video_drvdata(file);
>> +
>> + switch (s->target) {
>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>
> These two COMPOSE cases should be dropped, since there is no compose support!
>
>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>> + s->r.left = s->r.top = 0;
>> + s->r.width = vpfe->crop.width;
>> + s->r.height = vpfe->crop.height;
>> + break;
>> +
>> + case V4L2_SEL_TGT_CROP:
>> + s->r = vpfe->crop;
>> + break;
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>
> <snip>
>
> Regards,
>
> Hans

2014-12-05 12:24:23

by Hans Verkuil

Subject: Re: [PATCH v3] media: platform: add VPFE capture driver support for AM437X

Hi Prabhakar,

Sorry, there are still a few items that need to be fixed.
If you can make a v4 with these issues addressed, then I can still make a
pull request, although it depends on Mauro whether it is still accepted for
3.19.

On 12/04/2014 12:12 AM, Lad, Prabhakar wrote:
> From: Benoit Parrot <[email protected]>
>
> This patch adds Video Processing Front End (VPFE) driver for
> AM437X family of devices
> Driver supports the following:
> - V4L2 API using MMAP buffer access based on videobuf2 api
> - Asynchronous sensor/decoder sub device registration
> - DT support

Just to confirm: this driver only supports SDTV formats? No HDTV?
I didn't see any VIDIOC_*_DV_TIMINGS support, so I assume it really
isn't supported.

>
> Signed-off-by: Benoit Parrot <[email protected]>
> Signed-off-by: Darren Etheridge <[email protected]>
> Signed-off-by: Lad, Prabhakar <[email protected]>
> ---

<snip>

> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> new file mode 100644
> index 0000000..25863e8
> --- /dev/null
> +++ b/drivers/media/platform/am437x/am437x-vpfe.c

<snip>

> +
> +static int
> +cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
> +{
> + return lhs->type == rhs->type &&
> + lhs->fmt.pix.width == rhs->fmt.pix.width &&
> + lhs->fmt.pix.height == rhs->fmt.pix.height &&
> + lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
> + lhs->fmt.pix.field == rhs->fmt.pix.field &&
> + lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace;

Add a check for pix.ycbcr_enc and pix.quantization.

<snip>

> +/*
> + * vpfe_release : This function is based on the vb2_fop_release
> + * helper function.
> + * It has been augmented to handle module power management,
> + * by disabling/enabling h/w module fcntl clock when necessary.
> + */
> +static int vpfe_release(struct file *file)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + int ret;
> +
> + vpfe_dbg(2, vpfe, "vpfe_release\n");
> +
> + ret = _vb2_fop_release(file, NULL);

This isn't going to work. _vb2_fop_release calls v4l2_fh_release(), so
the v4l2_fh_is_singular_file(file) will be wrong and you release the fh
once too many.

I would do this:

if (!v4l2_fh_is_singular_file(file))
return vb2_fop_release(file);
mutex_lock(&vpfe->lock);
ret = _vb2_fop_release(file, NULL);
vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
mutex_unlock(&vpfe->lock);
return ret;

> +
> + if (v4l2_fh_is_singular_file(file)) {
> + mutex_lock(&vpfe->lock);
> + vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
> + v4l2_fh_release(file);
> + mutex_unlock(&vpfe->lock);
> + }
> +
> + return ret;
> +}

<snip>

> +static int vpfe_enum_size(struct file *file, void *priv,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + struct v4l2_subdev_frame_size_enum fse;
> + struct vpfe_subdev_info *sdinfo;
> + struct v4l2_mbus_framefmt mbus;
> + struct v4l2_pix_format pix;
> + struct vpfe_fmt *fmt;
> + int ret;
> +
> + vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
> +
> + /* check for valid format */
> + fmt = find_format_by_pix(fsize->pixel_format);
> + if (!fmt) {
> + vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
> + fsize->pixel_format);
> + return -EINVAL;
> + }
> +
> + memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
> +
> + sdinfo = vpfe->current_subdev;
> + if (!sdinfo->sd)
> + return -EINVAL;
> +
> + memset(&pix, 0x0, sizeof(pix));
> + /* Construct pix from parameter and use default for the rest */
> + pix.pixelformat = fsize->pixel_format;
> + pix.width = 640;
> + pix.height = 480;
> + pix.colorspace = V4L2_COLORSPACE_SRGB;
> + pix.field = V4L2_FIELD_NONE;
> + pix_to_mbus(vpfe, &pix, &mbus);
> +
> + memset(&fse, 0x0, sizeof(fse));
> + fse.index = fsize->index;
> + fse.pad = 0;
> + fse.code = mbus.code;
> + ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);

FYI: strictly speaking this is wrong since this op theoretically expects a
v4l2_subdev_fh pointer instead of a NULL argument. However, you do not have
an alternative right now. As you know, I've been working on fixing this, so
if that gets accepted, then you need to update this code as well in a later
patch.

> + if (ret)
> + return -EINVAL;
> +
> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
> + fse.index, fse.code, fse.min_width, fse.max_width,
> + fse.min_height, fse.max_height);
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> + fsize->discrete.width = fse.max_width;
> + fsize->discrete.height = fse.max_height;
> +
> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
> + fsize->index, print_fourcc(fsize->pixel_format),
> + fsize->discrete.width, fsize->discrete.height);
> +
> + return 0;
> +}
> +

<snip>

> +static int
> +vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:

These two COMPOSE cases should be dropped, since there is no compose support!

> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + s->r.left = s->r.top = 0;
> + s->r.width = vpfe->crop.width;
> + s->r.height = vpfe->crop.height;
> + break;
> +
> + case V4L2_SEL_TGT_CROP:
> + s->r = vpfe->crop;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}

<snip>

Regards,

Hans