Hi, Jason:
jason-jh.lin <[email protected]> 於 2021年9月21日 週二 下午11:52寫道：
>
> add MERGE additional properties description for mt8195:
> 1. async clock
> 2. fifo setting enable
> 3. reset controller
>
> Signed-off-by: jason-jh.lin <[email protected]>
> ---
> .../display/mediatek/mediatek,merge.yaml | 31 +++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> index 75beeb207ceb..542dd7137d3b 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> @@ -38,6 +38,19 @@ properties:
> clocks:
> items:
> - description: MERGE Clock
> + - description: MERGE Async Clock
> + Controlling the synchronous process between MERGE and other display
> + function blocks cross clock domain.
> +
> + mediatek,merge-fifo-en:
> + description:
> + The setting of merge fifo is mainly provided for the display latency
> + buffer to ensure that the back-end panel display data will not be
> + underrun, a little more data is needed in the fifo.
> + According to the merge fifo settings, when the water level is detected
> + to be insufficient, it will trigger RDMA sending ultra and preulra
> + command to SMI to speed up the data rate.
> + type: boolean
>
> mediatek,gce-client-reg:
> description:
> @@ -50,6 +63,11 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + resets:
> + description: reset controller
> + See Documentation/devicetree/bindings/reset/reset.txt for details.
> + maxItems: 1
> +
> required:
> - compatible
> - reg
> @@ -67,3 +85,16 @@ examples:
> power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_MERGE>;
> };
> +
> + merge5: disp_vpp_merge5@1c110000 {
> + compatible = "mediatek,mt8195-disp-merge";
> + reg = <0 0x1c110000 0 0x1000>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
> + <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
> + clock-names = "merge","merge_async";
Define clock-names first.
Regards,
Chun-Kuang.
> + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> + mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
> + mediatek,merge-fifo-en = <1>;
> + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
> + };
> --
> 2.18.0
>