I ran into problems trying to use the JIT support and display
source-level information. Basically, there was no dwarf debug
info generated in the jitted-XX.so files, yet I had libdw-dev
installed.
Turns out that the feature test build for test-dwarf.bin was broken
for me. It would die for the wrong reason:
/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
In other words, the libdw has a dependency on libelf which the Makefile
was not accounting for. Thus perf was not compiled with HAVE_DWARF_SUPPORT
and the code in genelf.c was not compiled in.
This patch fixes the issue by adding -lelf to the build rule for test-dwarf.c.
I wasted quite some time trying to debug this, so I have added a warning
in builtin-inject.c so that the user is warned that in case dwarf support
is disabled, no source line information will be generated in the output
.so files from the jitted code.
In v2, we removed the extraneaous echo in the make target.
Signed-off-by: Stephane Eranian <[email protected]>
---
tools/build/feature/Makefile | 7 ++++++-
tools/perf/builtin-inject.c | 3 +++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index cff38f342283..be5679707aa0 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -104,7 +104,12 @@ __BUILDXX = $(CXX) $(CXXFLAGS) -MD -Wall -Werror -o $@ $(patsubst %.bin,%.cpp,$(
$(OUTPUT)test-setns.bin:
$(BUILD)
-DWARFLIBS := -ldw
+#
+# there may be a dependency between libdw and libelf such as
+# /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
+# so force linking with libelf
+#
+DWARFLIBS := -ldw -lelf
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
endif
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 16a28547ca86..524255ed9a39 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -856,6 +856,9 @@ int cmd_inject(int argc, const char **argv)
}
#ifdef HAVE_JITDUMP
if (inject.jit_mode) {
+#ifndef HAVE_DWARF_SUPPORT
+ pr_warning("perf tool compiled without dwarf, no source line information will be generated\n");
+#endif
inject.tool.mmap2 = perf_event__jit_repipe_mmap2;
inject.tool.mmap = perf_event__jit_repipe_mmap;
inject.tool.ordered_events = true;
--
2.7.4
On Fri, Dec 08, 2017 at 09:02:18AM -0800, Stephane Eranian wrote:
> I ran into problems trying to use the JIT support and display
> source-level information. Basically, there was no dwarf debug
> info generated in the jitted-XX.so files, yet I had libdw-dev
> installed.
>
> Turns out that the feature test build for test-dwarf.bin was broken
> for me. It would die for the wrong reason:
>
> /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
>
> In other words, the libdw has a dependency on libelf which the Makefile
> was not accounting for. Thus perf was not compiled with HAVE_DWARF_SUPPORT
> and the code in genelf.c was not compiled in.
>
> This patch fixes the issue by adding -lelf to the build rule for test-dwarf.c.
>
> I wasted quite some time trying to debug this, so I have added a warning
> in builtin-inject.c so that the user is warned that in case dwarf support
> is disabled, no source line information will be generated in the output
> .so files from the jitted code.
>
> In v2, we removed the extraneaous echo in the make target.
>
> Signed-off-by: Stephane Eranian <[email protected]>
> ---
> tools/build/feature/Makefile | 7 ++++++-
> tools/perf/builtin-inject.c | 3 +++
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
> index cff38f342283..be5679707aa0 100644
> --- a/tools/build/feature/Makefile
> +++ b/tools/build/feature/Makefile
> @@ -104,7 +104,12 @@ __BUILDXX = $(CXX) $(CXXFLAGS) -MD -Wall -Werror -o $@ $(patsubst %.bin,%.cpp,$(
> $(OUTPUT)test-setns.bin:
> $(BUILD)
>
> -DWARFLIBS := -ldw
> +#
> +# there may be a dependency between libdw and libelf such as
> +# /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
> +# so force linking with libelf
> +#
> +DWARFLIBS := -ldw -lelf
> ifeq ($(findstring -static,${LDFLAGS}),-static)
> DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
you can remove '-lelf' from above line then (again)
jirka
> endif
> diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
> index 16a28547ca86..524255ed9a39 100644
> --- a/tools/perf/builtin-inject.c
> +++ b/tools/perf/builtin-inject.c
> @@ -856,6 +856,9 @@ int cmd_inject(int argc, const char **argv)
> }
> #ifdef HAVE_JITDUMP
> if (inject.jit_mode) {
> +#ifndef HAVE_DWARF_SUPPORT
> + pr_warning("perf tool compiled without dwarf, no source line information will be generated\n");
> +#endif
> inject.tool.mmap2 = perf_event__jit_repipe_mmap2;
> inject.tool.mmap = perf_event__jit_repipe_mmap;
> inject.tool.ordered_events = true;
> --
> 2.7.4
>
On Sun, Dec 17, 2017 at 7:05 PM, Jiri Olsa <[email protected]> wrote:
> On Fri, Dec 08, 2017 at 09:02:18AM -0800, Stephane Eranian wrote:
>> I ran into problems trying to use the JIT support and display
>> source-level information. Basically, there was no dwarf debug
>> info generated in the jitted-XX.so files, yet I had libdw-dev
>> installed.
>>
>> Turns out that the feature test build for test-dwarf.bin was broken
>> for me. It would die for the wrong reason:
>>
>> /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
>>
>> In other words, the libdw has a dependency on libelf which the Makefile
>> was not accounting for. Thus perf was not compiled with HAVE_DWARF_SUPPORT
>> and the code in genelf.c was not compiled in.
>>
>> This patch fixes the issue by adding -lelf to the build rule for test-dwarf.c.
>>
>> I wasted quite some time trying to debug this, so I have added a warning
>> in builtin-inject.c so that the user is warned that in case dwarf support
>> is disabled, no source line information will be generated in the output
>> .so files from the jitted code.
>>
>> In v2, we removed the extraneaous echo in the make target.
>>
>> Signed-off-by: Stephane Eranian <[email protected]>
>> ---
>> tools/build/feature/Makefile | 7 ++++++-
>> tools/perf/builtin-inject.c | 3 +++
>> 2 files changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
>> index cff38f342283..be5679707aa0 100644
>> --- a/tools/build/feature/Makefile
>> +++ b/tools/build/feature/Makefile
>> @@ -104,7 +104,12 @@ __BUILDXX = $(CXX) $(CXXFLAGS) -MD -Wall -Werror -o $@ $(patsubst %.bin,%.cpp,$(
>> $(OUTPUT)test-setns.bin:
>> $(BUILD)
>>
>> -DWARFLIBS := -ldw
>> +#
>> +# there may be a dependency between libdw and libelf such as
>> +# /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/libdw.so: undefined reference to `elf_compress@ELFUTILS_1.7'
>> +# so force linking with libelf
>> +#
>> +DWARFLIBS := -ldw -lelf
>> ifeq ($(findstring -static,${LDFLAGS}),-static)
>> DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
>
> you can remove '-lelf' from above line then (again)
>
Ok, I get it now. I thought you were talking about the line I added!
Let me resubmit.
Thanks.
> jirka
>
>> endif
>> diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
>> index 16a28547ca86..524255ed9a39 100644
>> --- a/tools/perf/builtin-inject.c
>> +++ b/tools/perf/builtin-inject.c
>> @@ -856,6 +856,9 @@ int cmd_inject(int argc, const char **argv)
>> }
>> #ifdef HAVE_JITDUMP
>> if (inject.jit_mode) {
>> +#ifndef HAVE_DWARF_SUPPORT
>> + pr_warning("perf tool compiled without dwarf, no source line information will be generated\n");
>> +#endif
>> inject.tool.mmap2 = perf_event__jit_repipe_mmap2;
>> inject.tool.mmap = perf_event__jit_repipe_mmap;
>> inject.tool.ordered_events = true;
>> --
>> 2.7.4
>>