2020-06-15 03:26:50

by Chunyan Zhang

[permalink] [raw]
Subject: [PATCH] nvmem: sc27xx: add sc2730 efuse support

From: Freeman Liu <[email protected]>

Add support to the new efuse IP which is integrated in the SC2730
which includes multiple blocks in a single chip.

Signed-off-by: Freeman Liu <[email protected]>
Signed-off-by: Chunyan Zhang <[email protected]>
---
drivers/nvmem/sc27xx-efuse.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
index ab5e7e0bc3d8..7d453c9d80da 100644
--- a/drivers/nvmem/sc27xx-efuse.c
+++ b/drivers/nvmem/sc27xx-efuse.c
@@ -4,12 +4,14 @@
#include <linux/hwspinlock.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/nvmem-provider.h>

/* PMIC global registers definition */
#define SC27XX_MODULE_EN 0xc08
+#define SC2730_MODULE_EN 0x1808
#define SC27XX_EFUSE_EN BIT(6)

/* Efuse controller registers definition */
@@ -49,12 +51,29 @@
#define SC27XX_EFUSE_POLL_TIMEOUT 3000000
#define SC27XX_EFUSE_POLL_DELAY_US 10000

+/*
+ * Since different PMICs of SC27xx series can have different
+ * address , we should save address in the device data structure.
+ */
+struct sc27xx_efuse_variant_data {
+ u32 module_en;
+};
+
struct sc27xx_efuse {
struct device *dev;
struct regmap *regmap;
struct hwspinlock *hwlock;
struct mutex mutex;
u32 base;
+ const struct sc27xx_efuse_variant_data *var_data;
+};
+
+static const struct sc27xx_efuse_variant_data sc2731_edata = {
+ .module_en = SC27XX_MODULE_EN,
+};
+
+static const struct sc27xx_efuse_variant_data sc2730_edata = {
+ .module_en = SC2730_MODULE_EN,
};

/*
@@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
return ret;

/* Enable the efuse controller. */
- ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
+ ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
if (ret)
goto unlock_efuse;
@@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)

disable_efuse:
/* Disable the efuse controller after reading. */
- regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
+ regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
unlock_efuse:
sc27xx_efuse_unlock(efuse);

@@ -187,8 +206,15 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
struct nvmem_config econfig = { };
struct nvmem_device *nvmem;
struct sc27xx_efuse *efuse;
+ const struct sc27xx_efuse_variant_data *pdata;
int ret;

+ pdata = of_device_get_match_data(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "No matching driver data found\n");
+ return -EINVAL;
+ }
+
efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
if (!efuse)
return -ENOMEM;
@@ -219,6 +245,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)

mutex_init(&efuse->mutex);
efuse->dev = &pdev->dev;
+ efuse->var_data = pdata;

econfig.stride = 1;
econfig.word_size = 1;
@@ -238,7 +265,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
}

static const struct of_device_id sc27xx_efuse_of_match[] = {
- { .compatible = "sprd,sc2731-efuse" },
+ { .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
+ { .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
{ }
};

--
2.20.1


2020-06-15 09:43:45

by Srinivas Kandagatla

[permalink] [raw]
Subject: Re: [PATCH] nvmem: sc27xx: add sc2730 efuse support



On 15/06/2020 04:23, Chunyan Zhang wrote:
> From: Freeman Liu <[email protected]>
>
> Add support to the new efuse IP which is integrated in the SC2730
> which includes multiple blocks in a single chip.
>
> Signed-off-by: Freeman Liu <[email protected]>
> Signed-off-by: Chunyan Zhang <[email protected]>
> ---
> drivers/nvmem/sc27xx-efuse.c | 34 +++++++++++++++++++++++++++++++---
> 1 file changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
> index ab5e7e0bc3d8..7d453c9d80da 100644
> --- a/drivers/nvmem/sc27xx-efuse.c
> +++ b/drivers/nvmem/sc27xx-efuse.c

...

>
> @@ -187,8 +206,15 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
> struct nvmem_config econfig = { };
> struct nvmem_device *nvmem;
> struct sc27xx_efuse *efuse;
> + const struct sc27xx_efuse_variant_data *pdata;
> int ret;
>
> + pdata = of_device_get_match_data(&pdev->dev);
> + if (!pdata) {

This check is totally unnecessary as you would not end up here unless
there is a matching compatible!


You could move this after kmalloc and assign efuse->var_data directly!!


--srini

> + dev_err(&pdev->dev, "No matching driver data found\n");
> + return -EINVAL;
> + }
> +
> efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
> if (!efuse)
> return -ENOMEM;
> @@ -219,6 +245,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
>
> mutex_init(&efuse->mutex);
> efuse->dev = &pdev->dev;
> + efuse->var_data = pdata;
>

2020-06-15 13:53:21

by Baolin Wang

[permalink] [raw]
Subject: Re: [PATCH] nvmem: sc27xx: add sc2730 efuse support

On Mon, Jun 15, 2020 at 11:23 AM Chunyan Zhang <[email protected]> wrote:
>
> From: Freeman Liu <[email protected]>
>
> Add support to the new efuse IP which is integrated in the SC2730
> which includes multiple blocks in a single chip.
>
> Signed-off-by: Freeman Liu <[email protected]>
> Signed-off-by: Chunyan Zhang <[email protected]>

Looks good to me. You can add my reviewed-by tag after fixing the
comment from Srinivas.
Reviewed-by: Baolin Wang <[email protected]>

> ---
> drivers/nvmem/sc27xx-efuse.c | 34 +++++++++++++++++++++++++++++++---
> 1 file changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
> index ab5e7e0bc3d8..7d453c9d80da 100644
> --- a/drivers/nvmem/sc27xx-efuse.c
> +++ b/drivers/nvmem/sc27xx-efuse.c
> @@ -4,12 +4,14 @@
> #include <linux/hwspinlock.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/nvmem-provider.h>
>
> /* PMIC global registers definition */
> #define SC27XX_MODULE_EN 0xc08
> +#define SC2730_MODULE_EN 0x1808
> #define SC27XX_EFUSE_EN BIT(6)
>
> /* Efuse controller registers definition */
> @@ -49,12 +51,29 @@
> #define SC27XX_EFUSE_POLL_TIMEOUT 3000000
> #define SC27XX_EFUSE_POLL_DELAY_US 10000
>
> +/*
> + * Since different PMICs of SC27xx series can have different
> + * address , we should save address in the device data structure.
> + */
> +struct sc27xx_efuse_variant_data {
> + u32 module_en;
> +};
> +
> struct sc27xx_efuse {
> struct device *dev;
> struct regmap *regmap;
> struct hwspinlock *hwlock;
> struct mutex mutex;
> u32 base;
> + const struct sc27xx_efuse_variant_data *var_data;
> +};
> +
> +static const struct sc27xx_efuse_variant_data sc2731_edata = {
> + .module_en = SC27XX_MODULE_EN,
> +};
> +
> +static const struct sc27xx_efuse_variant_data sc2730_edata = {
> + .module_en = SC2730_MODULE_EN,
> };
>
> /*
> @@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
> return ret;
>
> /* Enable the efuse controller. */
> - ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
> + ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
> SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
> if (ret)
> goto unlock_efuse;
> @@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
>
> disable_efuse:
> /* Disable the efuse controller after reading. */
> - regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
> + regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
> unlock_efuse:
> sc27xx_efuse_unlock(efuse);
>
> @@ -187,8 +206,15 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
> struct nvmem_config econfig = { };
> struct nvmem_device *nvmem;
> struct sc27xx_efuse *efuse;
> + const struct sc27xx_efuse_variant_data *pdata;
> int ret;
>
> + pdata = of_device_get_match_data(&pdev->dev);
> + if (!pdata) {
> + dev_err(&pdev->dev, "No matching driver data found\n");
> + return -EINVAL;
> + }
> +
> efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
> if (!efuse)
> return -ENOMEM;
> @@ -219,6 +245,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
>
> mutex_init(&efuse->mutex);
> efuse->dev = &pdev->dev;
> + efuse->var_data = pdata;
>
> econfig.stride = 1;
> econfig.word_size = 1;
> @@ -238,7 +265,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id sc27xx_efuse_of_match[] = {
> - { .compatible = "sprd,sc2731-efuse" },
> + { .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
> + { .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
> { }
> };
>
> --
> 2.20.1
>


--
Baolin Wang