Add a vendor id for LongSung and a product id for the M5710 module.
Signed-off-by: Daniel Palmer <[email protected]>
---
drivers/usb/serial/option.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2c21e34235bb..2666e061c38d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -560,6 +560,9 @@ static void option_instat_callback(struct urb *urb);
#define WETELECOM_PRODUCT_6802 0x6802
#define WETELECOM_PRODUCT_WMD300 0x6803
+/* LongSung */
+#define LONGSUNG_VENDOR_ID 0x2df3
+#define LONGSUNG_PRODUCT_M5710 0x9d03
/* Device flags */
@@ -2060,6 +2063,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
+ /* LongSung devices */
+ { USB_DEVICE(LONGSUNG_VENDOR_ID, LONGSUNG_PRODUCT_M5710) }, /* LongSung M5710 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
--
2.30.0.rc2
On Sun, Dec 27, 2020 at 12:17:16PM +0900, Daniel Palmer wrote:
> Add a vendor id for LongSung and a product id for the M5710 module.
>
> Signed-off-by: Daniel Palmer <[email protected]>
> ---
> drivers/usb/serial/option.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 2c21e34235bb..2666e061c38d 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -560,6 +560,9 @@ static void option_instat_callback(struct urb *urb);
> #define WETELECOM_PRODUCT_6802 0x6802
> #define WETELECOM_PRODUCT_WMD300 0x6803
>
> +/* LongSung */
> +#define LONGSUNG_VENDOR_ID 0x2df3
> +#define LONGSUNG_PRODUCT_M5710 0x9d03
I'm trying to move away from adding such defines for new devices as they
do not really add any value so I dropped them from the patch.
> /* Device flags */
>
> @@ -2060,6 +2063,8 @@ static const struct usb_device_id option_ids[] = {
> { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
> { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
> { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
> + /* LongSung devices */
> + { USB_DEVICE(LONGSUNG_VENDOR_ID, LONGSUNG_PRODUCT_M5710) }, /* LongSung M5710 */
> { } /* Terminating entry */
> };
> MODULE_DEVICE_TABLE(usb, option_ids);
Also, would you mind posting the "lsusb -v" output for this device for
reference? Do you know what each interface is used for?
I've applied this one locally, but I'll await your reply before pushing
it out.
Johan
Hi Johan,
On Mon, 4 Jan 2021 at 19:32, Johan Hovold <[email protected]> wrote:
> Also, would you mind posting the "lsusb -v" output for this device for
> reference?
The lsusb from busybox on this system doesn't support the -v option it seems.
Here is the output from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2df3 ProdID=9d03 Rev= 1.00
S: Manufacturer=Marvell
S: Product=Mobile Composite Device Bus
S: SerialNumber=<snip>
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I can rebuild my rootfs with the usbutils lsusb tomorrow when I have
physical access to it again if needed.
>Do you know what each interface is used for?
The second tty responds to AT commands. The others don't do anything so far.
The hardware documentation doesn't say much aside that there is a usb interface.
Thanks,
Daniel
On Mon, Jan 04, 2021 at 11:29:39PM +0900, Daniel Palmer wrote:
> Hi Johan,
>
> On Mon, 4 Jan 2021 at 19:32, Johan Hovold <[email protected]> wrote:
>
> > Also, would you mind posting the "lsusb -v" output for this device for
> > reference?
>
> The lsusb from busybox on this system doesn't support the -v option it seems.
> Here is the output from /sys/kernel/debug/usb/devices:
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=2df3 ProdID=9d03 Rev= 1.00
> S: Manufacturer=Marvell
> S: Product=Mobile Composite Device Bus
> S: SerialNumber=<snip>
> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
> E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> I can rebuild my rootfs with the usbutils lsusb tomorrow when I have
> physical access to it again if needed.
That's ok, the above will do just fine.
It looks like we must not try to bind to the first two interfaces
however:
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
> >Do you know what each interface is used for?
>
> The second tty responds to AT commands. The others don't do anything so far.
> The hardware documentation doesn't say much aside that there is a usb interface.
Ok, thanks. I'll apply this one with the above change now.
Johan