This series contains 2 fixes related to it6505 power management.
Changes in v3:
- Handle the error from extcon_get_state
- Collect review tag
Changes in v2:
- Handle the error from pm_runtime_get_sync in it6505_extcon_work
Pin-yen Lin (2):
drm/bridge: it6505: Adapt runtime power management framework
drm/bridge: it6505: Add pre_enable/post_disable callback
drivers/gpu/drm/bridge/ite-it6505.c | 58 ++++++++++++++++++++++++-----
1 file changed, 48 insertions(+), 10 deletions(-)
--
2.38.0.rc1.362.ged0d419d3c-goog
Use pm_runtime_(get|put)_sync to control the bridge power, and add
SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505
driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on
unnecessarily when no external display is connected.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <[email protected]>
---
Changes in v3:
- Handle the error from extcon_get_state
Changes in v2:
- Handle the error from pm_runtime_get_sync in it6505_extcon_work
drivers/gpu/drm/bridge/ite-it6505.c | 34 ++++++++++++++++++++---------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 2bb957cffd94..050f3be9adbc 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -421,6 +421,7 @@ struct it6505 {
struct notifier_block event_nb;
struct extcon_dev *extcon;
struct work_struct extcon_wq;
+ int extcon_state;
enum drm_connector_status connector_status;
enum link_train_status link_state;
struct work_struct link_works;
@@ -2685,31 +2686,41 @@ static void it6505_extcon_work(struct work_struct *work)
{
struct it6505 *it6505 = container_of(work, struct it6505, extcon_wq);
struct device *dev = &it6505->client->dev;
- int state = extcon_get_state(it6505->extcon, EXTCON_DISP_DP);
- unsigned int pwroffretry = 0;
+ int state, ret;
if (it6505->enable_drv_hold)
return;
mutex_lock(&it6505->extcon_lock);
+ state = extcon_get_state(it6505->extcon, EXTCON_DISP_DP);
DRM_DEV_DEBUG_DRIVER(dev, "EXTCON_DISP_DP = 0x%02x", state);
- if (state > 0) {
+
+ if (state == it6505->extcon_state || unlikely(state < 0))
+ goto unlock;
+ it6505->extcon_state = state;
+ if (state) {
DRM_DEV_DEBUG_DRIVER(dev, "start to power on");
msleep(100);
- it6505_poweron(it6505);
+ ret = pm_runtime_get_sync(dev);
+
+ /*
+ * On system resume, extcon_work can be triggered before
+ * pm_runtime_force_resume re-enables runtime power management.
+ * Handling the error here to make sure the bridge is powered on.
+ */
+ if (ret)
+ it6505_poweron(it6505);
} else {
DRM_DEV_DEBUG_DRIVER(dev, "start to power off");
- while (it6505_poweroff(it6505) && pwroffretry++ < 5) {
- DRM_DEV_DEBUG_DRIVER(dev, "power off fail %d times",
- pwroffretry);
- }
+ pm_runtime_put_sync(dev);
drm_helper_hpd_irq_event(it6505->bridge.dev);
memset(it6505->dpcd, 0, sizeof(it6505->dpcd));
DRM_DEV_DEBUG_DRIVER(dev, "power off it6505 success!");
}
+unlock:
mutex_unlock(&it6505->extcon_lock);
}
@@ -3032,8 +3043,10 @@ static __maybe_unused int it6505_bridge_suspend(struct device *dev)
return it6505_poweroff(it6505);
}
-static SIMPLE_DEV_PM_OPS(it6505_bridge_pm_ops, it6505_bridge_suspend,
- it6505_bridge_resume);
+static const struct dev_pm_ops it6505_bridge_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(it6505_bridge_suspend, it6505_bridge_resume, NULL)
+};
static int it6505_init_pdata(struct it6505 *it6505)
{
@@ -3315,6 +3328,7 @@ static int it6505_i2c_probe(struct i2c_client *client,
DRM_DEV_DEBUG_DRIVER(dev, "it6505 device name: %s", dev_name(dev));
debugfs_init(it6505);
+ pm_runtime_enable(dev);
it6505->bridge.funcs = &it6505_bridge_funcs;
it6505->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
--
2.38.0.rc1.362.ged0d419d3c-goog
Add atomic_pre_enable and atomic_post_disable callback to make sure the
bridge is not powered off until atomic_post_disable is called. This
prevents a power leakage when it6505 is powered off, but the upstream
DRM bridge is still sending display signals.
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes in v3:
- Collect review tag
drivers/gpu/drm/bridge/ite-it6505.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 050f3be9adbc..922e1f2b7a35 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2991,6 +2991,28 @@ static void it6505_bridge_atomic_disable(struct drm_bridge *bridge,
}
}
+static void it6505_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
+{
+ struct it6505 *it6505 = bridge_to_it6505(bridge);
+ struct device *dev = &it6505->client->dev;
+
+ DRM_DEV_DEBUG_DRIVER(dev, "start");
+
+ pm_runtime_get_sync(dev);
+}
+
+static void it6505_bridge_atomic_post_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
+{
+ struct it6505 *it6505 = bridge_to_it6505(bridge);
+ struct device *dev = &it6505->client->dev;
+
+ DRM_DEV_DEBUG_DRIVER(dev, "start");
+
+ pm_runtime_put_sync(dev);
+}
+
static enum drm_connector_status
it6505_bridge_detect(struct drm_bridge *bridge)
{
@@ -3025,6 +3047,8 @@ static const struct drm_bridge_funcs it6505_bridge_funcs = {
.mode_valid = it6505_bridge_mode_valid,
.atomic_enable = it6505_bridge_atomic_enable,
.atomic_disable = it6505_bridge_atomic_disable,
+ .atomic_pre_enable = it6505_bridge_atomic_pre_enable,
+ .atomic_post_disable = it6505_bridge_atomic_post_disable,
.detect = it6505_bridge_detect,
.get_edid = it6505_bridge_get_edid,
};
--
2.38.0.rc1.362.ged0d419d3c-goog
Il 04/10/22 06:49, Pin-yen Lin ha scritto:
> Use pm_runtime_(get|put)_sync to control the bridge power, and add
> SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505
> driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on
> unnecessarily when no external display is connected.
>
> Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
> Signed-off-by: Pin-yen Lin <[email protected]>
>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
On Tue, 4 Oct 2022 at 06:49, Pin-yen Lin <[email protected]> wrote:
>
> This series contains 2 fixes related to it6505 power management.
>
> Changes in v3:
> - Handle the error from extcon_get_state
> - Collect review tag
>
> Changes in v2:
> - Handle the error from pm_runtime_get_sync in it6505_extcon_work
>
> Pin-yen Lin (2):
> drm/bridge: it6505: Adapt runtime power management framework
> drm/bridge: it6505: Add pre_enable/post_disable callback
>
> drivers/gpu/drm/bridge/ite-it6505.c | 58 ++++++++++++++++++++++++-----
> 1 file changed, 48 insertions(+), 10 deletions(-)
>
> --
> 2.38.0.rc1.362.ged0d419d3c-goog
>
Applied to drm-misc-next.